Boost to Your Preparation for Citrix CCE-AppDS (1Y0-440) Certification Exam
-
Upload
natashasharma -
Category
Education
-
view
1 -
download
0
description
Transcript of Boost to Your Preparation for Citrix CCE-AppDS (1Y0-440) Certification Exam
-
BOOST TO YOUR
PREPARATION FOR
CITRIX CCE-APPDS
(1Y0-440)
CERTIFICATION
EXAM
Get complete detail on 1Y0-440 exam guide to crack Citrix ADC 13. You
can collect all information on 1Y0-440 tutorial, practice test, books,
study material, exam questions, and syllabus. Firm your knowledge on
Citrix ADC 13 and get ready to crack 1Y0-440 certification. Explore all
information on 1Y0-440 exam with the number of questions, passing
percentage, and time duration to complete the test.
1Y0-440 Practice
Test and
Preparation
Guide
-
Citrix Certified Expert - App Delivery and Security (CCE-AppDS) 1
1Y0-440 Practice Test
1Y0-440 is Architecting a Citrix Networking Solution– Certification offered by the
Citrix. Since you want to comprehend the 1Y0-440 Question Bank, I am assuming
you are already in the manner of preparation for your 1Y0-440 Certification Exam.
To prepare for the actual exam, all you need is to study the content of this exam
questions. You can recognize the weak area with our premium 1Y0-440 practice
exams and help you to provide more focus on each syllabus topic covered. This
method will help you to increase your confidence to pass the Citrix CCE-AppDS
certification with a better score.
https://www.vmexam.com/https://www.vmexam.com/citrix/citrix-1y0-440-cce-appds-certification-exam-syllabus
-
Citrix Certified Expert - App Delivery and Security (CCE-AppDS) 2
1Y0-440 Exam Details
Exam Name Architecting a Citrix Networking Solution (CCE-AppDS)
Exam Code 1Y0-440
Exam Price $300 USD
Duration 150 minutes
Number of
Questions 64
Passing Score 65%
Recommended Training / Books
CNS-420: Citrix Networking Assessment, Design, and Advanced Configuration
Schedule Exam PEARSON VUE
Sample Questions Citrix 1Y0-440 Sample Questions
Recommended
Practice
Citrix Certified Expert - App Delivery and Security
(CCE-AppDS) Practice Test
https://www.vmexam.com/https://training.citrix.com/learning/course?courseId=1905https://training.citrix.com/learning/course?courseId=1905https://home.pearsonvue.com/citrixhttps://www.vmexam.com/citrix/citrix-1y0-440-certification-exam-sample-questionshttps://www.vmexam.com/citrix/1y0-440-architecting-citrix-networking-solutionhttps://www.vmexam.com/citrix/1y0-440-architecting-citrix-networking-solution
-
Citrix Certified Expert - App Delivery and Security (CCE-AppDS) 3
1Y0-440 Exam Syllabus
Section Objectives Weight
Networking
Methodology and
Assessment
- Use the Citrix Methodology to plan projects.
- Identify/Prioritize Business Drivers and
Requirements.
- Determine how to Segment users into defined use
cases.
- Determine key Application Assessment and
Categorization.
- Determine how to perform Capabilities Assessment.
11%
Citrix ADC
Deployment
Architecture and
Topology
- Determine the appropriate Multi-Site Deployments
design.
- Determine how to design Multi Tennant
Infrastructure.
- Determine how to analyze Citrix Cloud design.
14%
Advanced
Authentication and
Authorization
- Determine how to review Configuration components
for AAA
- Determine how to evaluate the Authentication
Process and options
- Determine Session Management with AAA
- Determine how to utilize and implement MultiFactor
(nFactor) Authentication
21%
Citrix ADC Security - Determine how to evaluate the Authorization
configuration options
- Determine the End Point Analysis Considerations
- Define the correct protection against specific Layer 4-
7 attacks
12%
VPN Configuration - Determine how to evaluate VPN Access Scenarios and
Configuration.
- Determine how to Configure split tunneling and
Authorization.
- Determine RDP Proxy Configuration
- Determine ICA Proxy Considerations
12%
Advanced Traffic
Management
- Determine how to implement Advanced Load
Balancing setup
- Determine how to Implement Advanced Global Server
Load Balancing setup
11%
https://www.vmexam.com/
-
Citrix Certified Expert - App Delivery and Security (CCE-AppDS) 4
Citrix Application
Delivery
Management
Automation and
Orchestration
- Determine how to use Citrix Application Delivery
Management for Citrix ADC Automation
- Determine how to assess the Orchestration ability
- Determine how to utilize NITRO
- Determine how to create Stylebooks
19%
1Y0-440 Questions and Answers Set
01. A Citrix Architect can execute a configuration job using a
DeployMasterConfiguration template on a Citrix ADC _________ deployed
_________.
(Choose the correct option to complete sentence.)
a) CPX; as part of a high availability pair
b) CPX; as a stand alone device
c) SDX; with less than 6 partitions and dedicated management interface
d) MPX; as part of the cluster but Cluster IP is NOT configured
e) SDX; with no partitions as a stand alone device
Answer: c
02. Which two features are supported on LBaaSv1?
(Choose two.)
a) Cookie Insertion
b) Layer 7 Load Balancing
c) Certificate Bundle
d) Layer 4 Load balancing
e) Server Name Indicator
Answer: d, e
https://www.vmexam.com/
-
Citrix Certified Expert - App Delivery and Security (CCE-AppDS) 5
03. Which HTTP request method can a Citrix Architect utilize to send the
API NITRO call to modify the attributes of an entity in the Citrix ADC
configuration?
a) GET
b) POST
c) PUT
d) HEAD
Answer: c
04. Scenario: A Citrix Architect needs to deploy a Citrix ADC for
Workspacelab, which will provide application load balancing services to
Partnerlab and Vendorlab.
The setup requirements are as follows:
- A pair of Citrix ADC MPX appliances will be deployed in the DMZ network.
- High Availability will be accessible on the Citrix ADC MPX in the DMZ
Network.
- Load Balancing should be performed for the mail servers for Partnerlab
and Vendorlab.
- Separate Management accounts must be available for each client.
- VLAN 120 must be used for data traffic of Vendorlab, and VLAN 150 must
be used for the data traffic of Partnerlab.
- VLAN 160 must be used for the client-side traffic and must be shared
between the partitions.
Which set of commands meets this requirement?
a) add vlan 160
bind partition Vendorlab vlan 160
set vlan 160 sharing ENABLED
https://www.vmexam.com/
-
Citrix Certified Expert - App Delivery and Security (CCE-AppDS) 6
bind partition Partnerlab vlan 160 Hosted VDI
b) add vlan 160 sharing ENABLED
bind partition Vendorlab vlan 160
bind partition Partnerlab vlan 160
c) add vlan 160
bind partition Vendorlab vlan 160
set vlan 160 sharing ENABLED
bind partition Partnerlab vlan 160
d) add vlan 160 sharing ENABLED
switch partition Vendorlab
bind partition Vendorlab vlan 160
switch partition Partnerlab
bind partition Partnerlab vlan 160
Answer: b
05. Which step does a Citrix Architect need to ensure during the define
phase when following the Citrix Methodology?
a) Testing steps were integrated.
b) The project manager agrees with road map timelines.
c) A phased roll out was completed.
d) Existing networking infrastructure is ready.
e) The redundancy deployment decision was made.
Answer: e
https://www.vmexam.com/
-
Citrix Certified Expert - App Delivery and Security (CCE-AppDS) 7
06. Which four load-balancing methods support Citrix ADC Virtual Server-
Level Slow Start?
(Choose four.)
a) URLHash
b) Least response time
c) Least Packets
d) Least Connection
e) Token
f) Least bandwidth
g) SRCIPSRCPORTHash
Answer: b, c, d, f
07. Which three methods can a Citrix Architect use to assess the
capabilities of a network infrastructure?
(Choose three.)
a) Review existing monitoring solutions for periods of latency, lost packets, and
insufficient bandwidth.
b) Map the location of the users against the existing network topology.
c) Alter firewall rules of existing network to fit into the new Citrix ADC Deployment.
d) Examine the topology for single points of failure and potential bottlenecks.
e) Ensure that users and computers are in the correct organizational units (OUs).
Answer: a, b, d
https://www.vmexam.com/
-
Citrix Certified Expert - App Delivery and Security (CCE-AppDS) 8
08. Under which two circumstances will a service be taken out of the slow
start phase with automated slow start?
(Choose two.)
a) The service does NOT receive traffic for three successive increment intervals.
b) The server request rate parameters are set above 25 requests per second.
c) The actual request rate is slower than the new service request rate.
d) The percentage of traffic that the new service must receive is greater or equal to
50.
e) The request rate has been incremented 100 times.
Answer: a, c
09. What can help a Citrix Architect prepare to discuss time scales and
resource requirements?
a) Creating a high-level project plan.
b) Meeting with each member of the project team to assign tasks.
c) Designing the new environment.
d) Setting expectations with the project’s key stakeholders.
e) Identifying challenges associated with the project.
Answer: a
https://www.vmexam.com/
-
Citrix Certified Expert - App Delivery and Security (CCE-AppDS) 9
10. Scenario: A Citrix Architect has implemented two high availability pairs
of Citrix 5500 MPX and MPX 11500 respectively with 12.0.53.13 nc version.
The Citrix ADC devices are set up to handle Citrix ADC Gateway, Load
Balancing, Application Firewall, and Content Switching.
The Workspacelab infrastructure is set up to be monitored with Citrix
Application Delivery Management version 12.0.53.13 nc by the
Workspacelab administrators. The Workspacelab team wants to implement
one more pair of Citrix ADC MPX devices 7500 with version 12.0.53.13 nc.
The Citrix consulting team has assigned the task to implement these Citrix
ADC devices in the infrastructure and set them up to be monitored and
managed by Citrix Application Delivery Management.
The following are the requirements that were discussed during the project
initiation call:
- Citrix Application Delivery Management should be configured to get the
infrastructure information under sections such as HDX Insight, WEB
Insight, and Security Insight.
- Configuration on the new MPX devices should be identical to that of MPX
11500 devices.
- Configuration changes after the deployment and initial setup should be
optimized using Citrix Application Delivery Management.
- Citrix Application Delivery Management should be utilized to configure
templates that can be utilized by Workspacelab team in future
deployments.
- As per the requirement from Workspacelab team, Citrix Application
Delivery Management should store the audited data for only 15 days.
Which configuration setting should the consultant configure to ensure that
the audited data is NOT stored for more than 15 days?
a) System Prune settings
b) Syslog Prune settings
c) mps afdecoder logs to prune data after 15 days
d) mps analytics logs to prune data after 15 days
Answer: a
https://www.vmexam.com/
-
Citrix Certified Expert - App Delivery and Security (CCE-AppDS) 10
Full Online Practice of 1Y0-440 Certification
VMExam.com is one of the world’s leading certifications, Online Practice Test
providers. We partner with companies and individuals to address their requirements,
rendering Mock Tests and Question Bank that encourages working professionals to
attain their career goals. You can recognize the weak area with our premium 1Y0-
440 practice exams and help you to provide more focus on each syllabus topic
covered.
Start Online practice of 1Y0-440 Exam by visiting URL
https://www.vmexam.com/citrix/1y0-440-architecting-citrix-networking-
solution
https://www.vmexam.com/https://www.vmexam.com/citrix/1y0-440-architecting-citrix-networking-solutionhttps://www.vmexam.com/citrix/1y0-440-architecting-citrix-networking-solutionhttps://www.facebook.com/followvmexamhttps://www.linkedin.com/company/vmexam-com/?viewAsMember=truehttps://twitter.com/VM_Examhttps://www.youtube.com/channel/UCDgN8Imi3ZIMcaae44wfN9Q?view_as=subscriber