Booklet
description
Transcript of Booklet
Prof Anil K BhowmickDirector
Indian Institute of Technology Patna
Professor of Eminence
Indian Institute of Technology Kharagpur
Details of His Students Walking with Him in His Infallible and Exciting Journey with Polymers
1981 - 2014
. .
It is our great privilege to bring out this booklet in honour of our mentor, Prof. Anil K. Bhowmick, covering his exciting academic journey with his students through the years. This international conference (ICPAM 2014) and workshop (IWRERP2014) has provided a platform to publish this booklet in the midst of his students. We feel that this is the appropriate time to felicitate our professor by bringing all his students between the two covers of this booklet. This booklet will serve as a memory to one and all and provides us a means to connect wherever we may go.
Dear Sir, thanks to you for holding our hands during your journey in the road of polymers. Hope you always rejoice and enjoy while turning the pages of this booklet.
Always we remain obliged to you.
Yours loving students,
Titash Mondal
Nibedita Kasyapi
Shib Shankar Banerjee
Preetom Sarkar
Vidhi Chaudhury
Moumita Kotal
Radhika Mehta
Pawan Kumar Date: 3 0 . 0 5 . 2 0 1 4
03 05 11 29
Prof. Anil K. Bhowmick Messages from his current research group members
Messages from his former Ph.D. students
Messages from his former representative M.Tech., post-doctoral and research associate students
Prof. Anil K. Bhowmick is a Professor of Eminence and former Head of Rubber Technology Centre and former Dean of Postgraduate Studies and former Dean (Sponsored Research & Industrial Consultancy), IIT Kharagpur. He was also a foreign students’ advisor of the institute. He was previously associated with the University of Akron, Ohio, USA, London School of Polymer Technology, London and Tokyo Institute of Technology, Japan. His main research interests are: Thermoplastic Elastomers and Polymer blends, Nanocomposites, Polymer modification, Rubber Technology, Failure and Degradation of Polymers, Adhesion and Adhesives. He has more than five hundred publications in these fields, 35 book chapters and seven co-edited books. He was also co-editor of the special issue of Polymer and Composite Characterization of the Journal of Macromolecular Science (USA). He was the 2002 winner of the “Chemistry of Thermoplastic Elastomers” award and 1997 winner of the “George Stafford Whitby” award of the Rubber Division, American Chemical Society for innovative research, and 2001 K.M. Philip award of the All India Rubber Industries Association for outstanding contribution to the growth and development of rubber industries in India. He was also awarded NOCIL award 1991, JSPS award 1990, Commonwealth award
1990, MRF award 1989 and Stanton-Redcroft ITAS award 1989. He is on the Editorial Board of Journal of Adhesion Science & Technology (USA), Journal of Applied Polymer Science (USA), Journal of Materials Science (USA), Polymers and Polymer Composites (UK), Rubber Chemistry and Technology (USA), Polymer for Advanced Technologies (Germany) and Natural Rubber Research (India). He holds twelve patents including one US and one German patents. He brought many projects to the institute and developed many indigenous items for the country. He has guided forty two Ph.D. students and many masters’ and post-doctoral students. He is a Fellow of National Academy of Engineering, Indian National Science Academy and W.B. Academy of Science and Technology.
He is currently the founding director of IIT Patna.
Research Booklet 3
Indian Institute of Technology Patna6
Titash MondalResearch area : Modification of Graphene and its Polymer Nanocomposite
Nibedita KasyapiResearch area : Synthesis and characterization of block copolymers
Ph.D. 2011- PresentB.Sc.(Hons.) Chemistry,
University of Calcutta, IndiaM.Sc. Chemistry, University of
Calcutta, IndiaM.Tech. Rubber Technology, IIT
Kharagpur, IndiaE-mail: [email protected]
Ph.D. 2011 - PresentB.Sc.(Hons.)Chemistry,
University of Calcutta, IndiaB.Tech. Polymer Science and
Technology, University of Calcutta, India
M.Tech. Polymer Science and Technology, University of
Calcutta, IndiaE-mail:nibedita.mi6@gmail.
com
Message to our Professor
Diamond is a chunk of coal made under good pressure and Sir is such a person who knows how to craft a chunk of coal (when we join PhD) to a shining Diamond (When we graduate). He is the most dynamic person I have ever met in my life. I wish I could know the secret “ Mantra” behind his successful research life so as to try an implement them in my life. I bow my head in respect to this great person Professor Anil K Bhowmick.
Message to our Professor
You lead us to improve and
inspire us to shine,
you are my teacher,
the pride is mine!
Research Booklet 7
Shib Shankar BanerjeeResearch area : Rheology and Processing of Polymer Blends
Preetom SarkarResearch area : Elastomers from Renewable sources
Ph.D. 2012 - PresentB.Sc.(Hons.)Chemistry,
University of Burdwan, IndiaB.Tech. Polymer Science and
Technology, University of Calcutta, India
M.Tech. Polymer Science and Technology, IIT Delhi, India
E-mail:[email protected]
Ph.D. 2013 - PresentB.Sc. (Hons.) Chemistry,
University of Calcutta, IndiaB.Tech. Polymer Science and
Technology, University of Calcutta, India
M.Tech. Rubber Technology, IIT Kharagpur, India
E-mail: [email protected]
Message to our Professor
Sir, thank you for giving me the opportunity to be your student and excellent research environ-ment at IIT Patna. During the one year golden research journey at IIT Patna, my publications in the international journals and broad learning of instruments in very short span of time, are especially for you. I would like to follow your dis-tinguished professionalism and innovative high quality research work in every venture in my life.
Message to our Professor
It is a great privilege to express my sincerest regards and deep sense ofgratitude to my Sir, Prof. Anil K Bhowmick. I am deeply obliged andindebted to him for providing me an opportunity to work with him. Hisunflinching impulse, persistent encouragement, unfathomable knowledge andable guidance helped me a lot to pave the road towards research.... Sir,it’s an honour to be your student and I wish to remain the same foreverand ever..
Indian Institute of Technology Patna8
Dr. Vidhi ChaudharyResearch area : Nano materials modification & Polymer Nanocomposites
Dr. Moumita KotalResearch area : Nanotechnology and Polymer Nanocomposites
Post-Doctoral FellowPh.D. IIT Roorkee, 2009
E-mail: [email protected]
Post-Doctoral FellowPh.D. IIT Kharagpur, 2012
E-mail: [email protected]
Message to our Professor
Prof. Bhowmick is one of the best teachers I have ever had. Most thoughtful, incredible, rational, professor ever. He has the gift of philosophy so that everyone is inspired and feels comfort-able without being scared by how intelligent he truly is. Under his guidance, I learned more than I could have ever asked. Beside the academic knowledge, I have learned to manage my time, set up priorities and obtain good results.
Message to our Professor
I found guidance, friendship, discipline and love in one person. And that person is you- Prof. Anil K Bhowmick. I am always being grateful to you for all the hard work and efforts you have put in, for guiding us. All the support you gave me helped me get to where I am today. Wherever I may go in my life, I will always remember that I had an excellent teacher like you.
Research Booklet 9
Radhika MehtaResearch area : Copolymers for DNA delivery
Intern: March, 2013 - PresentB.Sc.(Hons.) Chemistry, University of Delhi, India
M.Sc. Chemistry, University of Oxford, UK
E-mail: [email protected]
Message to our Professor
Sir, thank you for your guidance, encouragement and advice since the day I joined. Your continued inputs and enthusiasm have made learning and experimenting fun for me; made me believe in my abilities and train consistently; push my limits with each task; and try building a broader picture of the work that I do. Learning and working under you has definitely motivated me not only to pursue research but also to continue enjoying it. Today, I would like to thank you for inspiring me through your guidance and your dedication, which would remain with me wherever I go.
Indian Institute of Technology Patna12
Dr. Nabarun RoyPh.D. Thesis : Synthesis, characterization and properties of crosslinked liquid silicone rubber based nanocomposites with fibrous nanofillers, 2013
Dr. Pradip K. MajiPh.D. Thesis : Synthesis, characterization and properties of novel polyurethanes from hyperbranched polyol and their nanocomposites, 2012
Engineer Kokoku Intech Co. Ltd, Japan.
Phone: +91-9474338559 (M)E-mail: nabarunroy08@gmail.
com
ScientistMinistry of Defence (DRDO),
Govt. of India3 Base Repair Depot, Indian Air
Force, ChandigarhResidential address:House No:
2315A, Sector: 31CChandigarh-160030
Phone: 0172-262638043(O); 0172-2651321
(H);09478501321(M)Fax: 0172-2642638
E-mail: [email protected]
Message to our Professor
Professor Bhowmick is another face of perfec-tion. From preparing an “envelop of a letter “ to dealing with a critical situation in a disciplined way, he has no other contender. While he is strict regarding work, however, at the same time, he is very encouraging, caring and concerned other-wise. In him I got to find an excellent teacher, a perfect guide who showed the proper way to life and a really good friend with whom I shared my happiness and sadness. Sir, thank you so much for infusing within me the confidence of being what I am today and what I am doing today.
Message to our Professor
I’m so thankful that you are my mentor! You are not just a teacher to me but you are also a motivation. It feels great to have like you who have guided me to the right track in my profes-sional life. Thanks for helping me to identify my skills and strength during all the time, I worked with you. Your hard work, dedication, fabulous ability to research, positive attitude, enthusiasm and intelligence have been my inspiration since I became your student. The experience of working with you, I strongly believe, will have far-reaching influence in my future life. Thank you sir!
Research Booklet 13
Dr. Anusuya ChoudhuryPh.D. Thesis : Hydrogenated nitrile butadiene rubber nanocomposites: preparation and properties with special reference to thermal stability, 2012
Dr. Ganesh C. BasakPh.D. Thesis : Adhesion improvement of vulcanized ethylene propylene diene polymethylene rubber: effect of surface modifications and compounding ingredients, 2012
Residential address:P.O. Dogachia, (Near Vivekananda
Statue),North 24 PGS. Naihati, West
Bengal, Pin 743130Phone:+91 8420363259(M)
E mail : [email protected]
ManagerReliance Ind. Ltd.,
Phone: +919725203247(M)E-mail: ganesh.basak@gmail.
com
Message to our Professor
I would like to record my earnest gratitude and thanks to Prof. Anil K. Bhowmick, for he gave me a chance to work under his supervision and guid-ance. He was extremely encouraging and had constant reassuring smile from the initial stage of research to the final level enabling us to develop an understanding of the subject. In spite of his numerous personal projects, he was always accessible and willing to help his students with their research, always had time to concentrate on details of our work, had taken pain to go through details of our papers and thesis, made necessary corrections and gave invaluable pieces of advice. He had continuously supplied direction and insightful fresh ideas to his students which not only made our research life smooth, but at the same time, rewarding too. I feel myself extremely fortunate that I was a part of Prof. Bhowmick’s research team.
Message to our Professor
Sir, It is a great privilege to work under your supervision. Many thanks for your continued support and guidance.
Indian Institute of Technology Patna14
Dr. Mithun BhattacharyaPh.D. Thesis : Structure-Property Relationships of Elastomer Nanocomposites with Particular Reference to Wear Resistant Applications, 2010
Dr. Dinesh Kumar KotneesPh.D. Thesis : Influence of Tackifiers and Nanoclays on Autohesive Tack of Brominated Isobutyleneco-p-methylstyrene Elastomer, 2010
Research AssociateMorgan Research Lab
School of Polymers and High Performance Materials
University of Southern Mississippi
118 College Drive #5050Hattiesburg, MS- 39406
Phone: 01-601-266-4726 (Lab)
E-mail: [email protected]
Assistant Professor Department of Materials Sci.
& Engg.IIT Patna
Patliputra colonyPatna-800013
Bihar, IndiaPhone: +91-612-2552185,
08051100995(M)E-mail:[email protected] /
Message to our Professor
The years spent with Sir (journey), watching, learning, and admiring his work ethic, as he nurtured his wards toward their advanced degrees (destination!) helped me realize that it is always about the journey, and not the destina-tion. So, relish it while at it, and cherish it forever! Because the pebbles you pick up during this journey alongside him, often shape up to be the cornerstones for the life ahead.
Message to our Professor
Respected Sir, your clarity in the subject, skills of presentation in writing and oral, perseverance in achieving targets, passion and dedication to the field of polymer research and perfect acumen in management will always remain as a goal to which I will aspire. My heartfelt thanks for all the opportunities being given to me sir and truly you are the elixir of my career
Research Booklet 15
Dr. Anjan BiswasPh.D. Thesis : Chemically Modified Metallocene based Polyolefinic Elastomers : Preparation, Properties and Applications, 2009
Dr. Jinu Jacob GeorgePh.D. Thesis : Preparation, Characterization and Properties of Ethylene Vinyl Acetate Nanocomposites Based on Carbon Nanofillers, 2009
Associate Professor Government College of
Engineering & Leather TechnologyGovt. of West BengalLB Block; Sector-III;
Salt Lake City; Kolkata – 700098
Address: House No. – 16; Joy Gopal Das Road; Sodepur;
Kolkata – 700110Phone:09231527837 /
09239036766 (M), 033 23356977 (Extn:207)(O),Office Fax: +91 33 23358353
E-mail:[email protected]
Scientist, Rubber Research Institute of
India Rubber Board,
Ministry of Commerce, Govt. of India.
Technical Consultancy, RRII, Kottayam-9
Phone: 0481 2353311, 09497792092
E-mail: [email protected]
Message to our Professor
As my ph.d guide, what he (sir) did for me was almost like harvesting with goat (in bengali we say chhagol diye langol chas) and that he did by his excellent power of motivation, constant direct involvement in my work (not only as my guide but sometime as my co-worker also) & endless help for any technical or non-technical, official or my personal matter.
Message to our Professor
I found in Prof. Anil K. Bhowmick a complete teacher who not only guide but also extend all supports to his students. I very much owe to his stringent training and encouragements for what I am today.
Indian Institute of Technology Patna16
Dr. Haimanti DattaPhD Thesis : Synthesis and Characterization of Polyacrylates and their Nanocomposites by Atom transfer radical polymerization, 2009
Dr. Anirban GangulyPhD Thesis : Preparation and Properties of ThermoplasticElastomer-Clay Nanocomposites from Unmodifiedand Chemically Modified poly [styrene- (ethylene-co-butylene) – styrene] Triblock Copolymer, 2008
ScientistSABIC Research &Technology
Pvt. Ltd,Bangalore.
Phone: +91-80-6736 2319, 9620134638
E-mail:[email protected]
Lead scientistPerformance Chemicals SBU
SABIC Technology Center – Bangalore
SABIC Research & Technology Pvt. Ltd.
Plot No. 81-85, Chikkadunnasandra Viilage, AnekalTaluk, Off. Sarjapura-
Attibele State Highway,Near St. Philomena School,
Bengaluru-562125, Karnataka, India.
Phone: +919986049952, +918067606402 ,
Fax: +918067606203E-mail:anirban.ganguly@sabic.
com, [email protected]
Message to our Professor
Thank you for giving me the opportunity to be your student, for your support and guidance throughout my career. Apart from your selfless sharing of knowledge and resources, I am highly influenced by your immense professionalism, ‘never-say-die’ attitude and unfathomable pas-sion for high quality work, which I would like to follow in every endeavor in my life.
Message to our Professor
Dear Sir, you had given opportunity to prove myself in research during PhD. I remember all seniors were started completing their thesis work when I came to your research group in early 2004.
Apart from research, had a chance to contribute to re-build a ‘new-generation research group’ under your supervision. Your teaching in class and during research was phenomenal. You had given chance to each and every one to “Learn first” and then to “teach others”. You are the Guru to learn scientific approach to “Inspire” – “Engage” – “Create” and “Deliver”. Your passion for scientific research with indomitable rigor has given you the quality and volume of knowledge you have shared to the world of Rubber and Polymer Science & Technology. Finding my life-partner , Pinka, from your research group was something to cherish life-long. Sir, wish you a long and healthy life with same intensity of crea-tive work. Regards / Anirban
Research Booklet 17
Dr. Samik GuptaPhD Thesis : Preparation and Properties of Novel Poly (Phenylene Ether) Based Thermoplastic Elastomers, 2008
Dr. Madhuchhanda MaitiPhD Thesis : Fluoroelastomer-Layered Silicate Nanocomposites: Preparation, Characterizationand Properties, 2007
Manager SABIC Technology Center,
Bengaluru Flat # PR 301; Golden
Blossom; Kadugodi; Whitefield; Bangalore: 560067
Email: [email protected]
Mobile: +919845169614
Senior ManagerReliance Ind. Ltd.
Phone: 9998001079, +91-265-6696000, extn: 2033, Fax:
+91-265-6693934Email: madhu.c.maiti@gmail.
com
Message to our Professor
Prof. Anil K. Bhowmick, my PhD supervisor has been an excellent mentor. His commitment as a teacher is really noteworthy. I don’t remember a single class at IIT where he was late or absent being in the IIT campus. It has been a valuable experience and privilege to work under his guidance
Message to our Professor
Today I would like to take the time to thank my mentor, Prof. Anil K. Bhowmick. He has made an everlasting impression on all of us. He has a great meter to measure your capacity and where you can continue to grow. I am truly blessed and lucky to work under his supervision. I would like to follow his leadership any day, at any given time.
Indian Institute of Technology Patna18
Dr. V. VijayabaskarPhD Thesis : Electron beam crosslinking of nitrile rubber with special reference to mixed crosslinking system, 2005
Dr. Abhijit BandyopadhyayPhD Thesis : Polymer-in situ silica hybrid nanocomposites by sol-gel technique: Synthesis, characterization and properties, 2005
Chief ManagerProduct Development Centre
Performance Chemicals Division Balmer Lawrie & Co . Ltd Manali, Chennai-600068.
India Tel: 91-44-25946604
Mobile:00919941182630 Email: vijay.baskar@gmail.
Internet: www.balmerlawrie.com
Assistant Professor Department of Polymer Science
& Technology, University of Calcutta, Kolkata, India
Phone: 91-9433186957, 033-2350-1397/6996/6387/8386;
Extension: 288 Fax:91-033-2351-9755
E-mail: abhijitbandyopadhyay@yahoo.
co.in; [email protected] Website:
www.abhijitbandyopadhyay.com
Message to our Professor
I am very grateful to you for what I am right now. You seasoned us very well, and now that I am ready to go out in the real world, I want to say thank you for all the effort. You encourage us to grab every opportunity along the way. Forever you’ll be treasured as one of the heroes of my life.
Thank you, sir!
Message to our Professor
Sir, Thanks for Shaping my Career from NO-WHERE to SOMEWHERE
Research Booklet 19
Dr. Susmita Dey SadhuPhD Thesis : Preparation, structure & properties of rubber based nanocomposites, 2005
Dr. S. AnandhanPhD Thesis : Studies on thermoplastic elastomeric nitrile rubber/waste nitrile rubber/poly(styrene-co-acrylonitrile) and nitrile rubber/waste computer plastics blends, 2004
Assistant ProfessorDepartment of Polymer Science
Bhaskaracharya College of Applied Sciences
University of DelhiSec 2, Dwarka, New Delhi
110075Phone: +91-9910028035,
011-25074654E-mail: susmitasadhu@
hotmail.com
Associate Professor,Department of Metallurgical
and Materials Engineering National Institute of Technology
Karnataka, Srinivas Nagar, Mangalore-575025, Karnataka.
Phone: 9663054756, 0824-2474000 (Extn: 3762) , Fax:
0824-2474059E-mail: [email protected]
, [email protected] Website:http://www.nitk.ac.in/
show/anandhan-srinivasan
Message to our Professor
I thank Prof. Bhowmick for being a wonderful supervisor and guide. During my 3 years of Ph. D. I learnt a lot of things which has helped me in my career later on. The thing that I appreciate is as a supervisor and guide he is always there with all his students even after they their completion of the degree and his tremendous energy to work tirelessly. I wish him happiness and good health in coming days.
Message to our Professor
My message to our Professor: “You are a great source of inspiration to me. You are a great teacher and researcher, who leads by example as to how hardworking and focussed a scientist should be. The time that I spent in your group will be cherished and treasured by me forever as it has given me the strength and perseverance to succeed in my academic and research career. Thanks a million!!!
Indian Institute of Technology Patna20
Dr. A. M. ShanmugharajResearch area : Electron beam modification of dual phase filler: surface characteristics, morphology and its influence on the properties of styrene-butadiene rubber vulcanizates, 2003
Dr. Sudip RayPhD Thesis : Influence of untreated and novel surface modified silica and clay fillers on the morphology and physical properties of ethylene-octene copolymer, 2004
Assistant ProfessorDepartment of Chemical
Engineering, Kyung Hee University, Yongin,
Kyunggi-Do 446701, South Korea,
Phone: 82-10-8698-2206, 82-31-201-3342 (office);
82-31-201-2535 (Lab) ,Fax: 82-31-202-1946
E-mail: [email protected], shanmughar@gmail.
com, [email protected]
Senior Research Fellow University of Auckland, New
Zealand Address:
Phone: +64-211504754 , +64-9-9235220 ,Fax: +64-9-
3737042E-mail: [email protected]
Message to our Professor
I gratefully acknowledge my sincere veneration, indebtedness, profound gratitude and deep respect to Professor Anil K. Bhowmick for his valuable guidance, helpful criticisms, useful sug-gestions and encouragement given throughout my Ph. D studies as well as after Ph. D. It is also a great honor and privilege for me to work with him and to share his valuable knowledge and expertise
Message to our Professor
Professor Anil Bhowmick is an iconic figure in the field of Polymer Science and Technology recognized both nationally and internationally. His depth of knowledge, passion for good work, dedication and commitments are remarkable. His teaching, mentoring and research are inspi-rational for all young academics and scientists. I wish him all successes.
Research Booklet 21
Dr. R.S. RajeevPhD Thesis : Short Melamine Fiber Filled Rubber. 2003
Dr. M. Abdul KaderPhD Thesis : Novel binary and ternaryblends from fluorocarbonrubber, acrylic rubber andacrylate plastics, 2002
Scientist/EngineerPolymers and Special
Chemicals Division, PED Area, VRC, Vikram Sarabhai Space Centre,
ISRO PO, Thiruvananthapuram-695 022,
Kerala, IndiaPhone: 9495110733, 0471
2564456 (O), Fax: 0471 256 4096
E-mail:[email protected]; [email protected]
Chief Manager (Technical)Central Institute of
Plastics Engineering & Technology(CIPET)
Plastics Testing Centre, Chennai
TVK Industrial Estate,Guindy, Chennai-600 032F2Residental address: Sushee
Enclave, Amutham Colony,
Guduvanchery, Kanjeepuram (Dt.), Tamilnadu
Phone: +919677123883, +91 44 22254708
E mail : [email protected]
Message to our Professor
I feel proud and happy to be one of Prof. Bhowmick’s research students, who encouraged me to do atomic force microscopy way back in 2001, and ours was one of the very early papers on AFM of rubber composites. This shows how he is thinking ahead in his research topics and how he is caring his students. He was consistent, persistent and determined to make sure that each student delivers the maximum and each thesis attained its perfection. Thank you, Sir.
Message to our Professor
I consider Prof. A. K. Bhowmick as a role model for my professional life. He shows his passion for teaching and research amid his busy schedule of administering an institution. His achievements are highly commendable in the field of polymer science and Technology.
Indian Institute of Technology Patna22
Dr. Santanu ChattopadhyayPhD Thesis : Development and properties of electron beam modified thermoplastic elastomeric polyolefin blends, 2001
Dr. Abhijit Jha PhD Thesis : Heat and oil resistant thermoplastic elastomers from Nylon-6 and Acrylate rubber reactive blends,1998
Associate Professor, Rubber Technology Centre
Residential address: C1-154, IIT Campus, Kharagpur 721302
Phone: 03222-281758; 09932790504; 9434055304
Email: santanu @ rtc.iitkgp.ernet.in and
Founder, Flow Management Consulting
Viman Nagar, Pune – 411014, India
Phone: 9890427611, 020-26501090
E-mail: [email protected]
Message to our Professor
Prof. Bhowmick has been the person from whom I have picked up many things like, hard work, punctuality and dedication towards research. He has truly guided and motivated me for pursuing my career in the academic front. He has been one of my best teachers I have ever encountered throughout my academic career. Indeed, he has molded me to the current shape affectionately. I adore him from the core of my heart and wish him to be more successful in his long life ahead.
Message to our Professor
Sir, it’s a life time opportunity to be a student of yours and work under your guidance. Hard work and persistent effort will ultimately pay in life – the most valuable lesson we all have learnt from you. Thanks and kindest regards.
Research Booklet 23
Dr. Mousumi De SarkarPhD Thesis : Thermoplastic Elastomeric Hydrogenated Styrene-Butadiene Rubber and its Blends with Polyethylene: Preparation, Characterization and Properties (2000)
Prof. Kamal K. KarPhD Thesis : Medium and high strain hysteresis loss behaviour of filled natural rubber and styrene butadiene rubber vulcanizates,1998
Business Development Manager, Corporate Research
and Development, E.I.DuPont
Phone: 09560499920Email: [email protected]
Professor Department of Mechanical Engineering and Materials
Science Programme Indian Institute of Technology Kanpur,
Phone: 05122597687, 09415081153 Fax:
05122597408 E-mail:[email protected]
Message to our Professor
Sir, you have been a key influence in my life and career. It was an honour to know you as a professor and mentor while a student and a privilege to work with you as a colleague. The curiosity in polymer science you instilled in me still drives my passion in this field. Thank you for being a role model and continue to shape me as a professional
Message to our Professor
In my 45 year’s journey from Narendrapur Ramakrishna Mission,IIT-Kharagpur, Iowa State University, Massachusetts Institute ofTechnology to IIT-Kanpur, I could not find another person like Prof. AnilK. Bhowmick, who is my guruji, father, teacher and an icon of myaccomplishments. He inspired me to “think big” and “dream big” so that,in the years ahead, I will be able to translate these dreams into thereality. An example is “Suc-cessful Development of Road Wheel for Milita-ryBattle Tank Arjuna”. Today I am the most most happiest person in theDepartment of Mechanical Engineering at IIT-Kanpur.
Indian Institute of Technology Patna24
Dr. Arup Kumar ChandraPhD Thesis : Influence of metal organic promoters on the properties of steel cord skim compound with special refernce to adhesion, 1996
Dr. P. ThavamaniPhD Thesis : Development of tank track pad compounds and studies on their wear resistance, 1993
Head Global Raw Materials & Compound Development
Apollo Tyres Ltd.R&D-Centre, Apollo Tyres Ltd.,
Limda, Waghodia, Vadodara-
391760,Gujarat , India.Phone: +91 98790 12233 ,
+91 2668-262580 to 82Fax: +91 2668 26588
E-mail: [email protected],
SABICRiyadhEmail: [email protected]
Message to our Professor
Prof. Bhowmick is like the dronacharyay of rub-ber technology. he is not only one of the authority in this subject, but also created several scholars in this field. I am blessed to be one of his student. I pray to almighty to give him long peaceful , suc-cessful , fruitful professional as well as family life.
Message to our Professor
Research Booklet 25
Dr. Nalini Ranjan KumarPhD Thesis : Mill processability of gum and filled elastomers with special reference to the band Formation behaviour, 1992
Dr. Amalendu Sarkar PhD Thesis : Deformation and fracture of rubber to rubber joints, 1993
Vice President (R&D and QA)Polyhose India (Rubber) Pvt.
LtdChennai
Address:W - 324, 2nd Avenue, Anna Nagar western extension
Chennai – 600101Phone : +91 9940659389
Land line: +91 44 26158010E mail ID : dr.nrkumar@gmail.
com
Vice President, Materials Technology
QURE MEDICAL 14932 BRANNOCK HILLS
DRIVECHARLOTTE, NORTH
CAROLINA, USA 28278Mobile: +001678-521-6349
Office land line: +001803-325-6235
E mail : [email protected]
Message to our Professor
Prof. Bhowmick is a dynamic and active supervi-sor . He encourages researchers to carry out quality research work in a limited time
Message to our Professor
Dr. Bhowmick is a great inspirational teacher. He has incredible gift of teaching. What I have seen in him during my long association as a M.Tech. and Ph.D. student – he has a passion for his profession, a vision for each student and really care about their outcome and result oriented.. I am proud that I got him as my teacher in my life and sincere thanks to him for all his valuable contribution in my life.
Indian Institute of Technology Patna26
Dr. Achintya K. SenPhD Thesis : Grafting and crosslinking of polyethylene, ethylenepropylene rubbers and their blends, 1991
Dr. Susmita BhattacharyyaPhD Thesis : Hydrogenated and hydrofornylated nitrile rubbers: preparation, characterization and degradation, 1991
General Manager BU. Masterbatches,
Clariant Chemicals India Limited.
Kolshet Road, P.O. Sandoz Baug,
Thane 400607. MH., INDIA.Phone:+91 9820503743
Office land line: +91 2225315521(O)
Email ID: [email protected]
Pushan Renewable EnergyFounder and Managing Director
A 701 Elite Anmol, Bicholi Hapsi Road, Indore, 452016
+91 7869603292, +91 8989785089
Message to our Professor
Your good self, Prof. Bhowmick are “EKMABD-WITIYAM”, synonym to “Devotion and Dedica-tion” to Academics and Research. Am lucky to get you as a “Friend, Philosopher & Guide” in my Academic, Professional & Personal life. You are my all time inspiration, and your blessings are always with me. What I am today in Research & Innovation is just an extension ( one of the terminals ) of your Head, Heart & Hands. Pray to God to keep you in good health and spirit to contribute more to the world.
Message to our Professor
While working with you, I learnt the skills of implementing an idea, how to start, manage and complete a project. These learnings have been extremely helpful in my life and I am practicing it till today
Research Booklet 27
Dr. Namita ChoudhuryPhD Thesis : Studies on thermoplastic elastomeric natural rubber-polyethylene blends with reference to interaction between components, 1989
Dr. Arup Saha DeuriPhD Thesis : Ageing of Rocket Insulator Compound with Special reference to EPDM Rubber, 1987
Research ProfessorDivision of Information
Technology, Engineering and the
Environment Ian Wark Research Institute
Mawson Lakes Campus IW2-27
Phone:+61 8 830 23719 , +61 8 830 23683
Email: [email protected]
http://people.unisa.edu.au/Namita.Choudhury
General Manager ( R & D)Bal Krishna Tyres ( BKT)
BKT House, C/15, Trade WorldKamala mills Compound,
Senapati Bapat Marg, Lower Parel ,Mumbai 400013
Residential address: CE 131, Sector 1, Salt lake , Kolkata
700064 Phone: +919167221127 /
9760093583+91 22 6666 3800 ext 257(O)
Email:[email protected], asdeuri@rediffmail.
com
Message to our Professor
Rubber Technology Centre at the Indian Institute of Technology, Kharagpur, is the epicentre of research in elastomer field in India where I began my journey in 1986 with Prof Bhowmick as one of his first PhD student funded by a DST project. In the midst of all leading scientists there, I was in a world of complete immersion, constant discussions and engagement in science. I recall Dr. Bhowmick - a very hands on and self-effacing person- always found time to conduct research in the lab. A man of principles and a superb scientist, he always remained engaged with his students and was very supportive of his researchers.
An eminent scientist in the field, he pioneered many innovations in elastomer research. Re-search is always a central part of his life, and that is the secret of his success. This passion for research has rewarded him with many chal-lenging roles including his current role, and also the community with many profound long lasting outcomes. Thank you Prof Bhowmick for all your support and inspiration during my study. I believe many of your students have floated their research boats like me with you for a journey to know the unknown and have seen the impact of it.
Message to our Professor
A personality above mankind , a preacher , a teacher, who awaken me and help me to arise to be the person, I am today. Thank You, Sir, for everything.
Indian Institute of Technology Patna28
Dr. Tapan K. BhaumikPhD Thesis : Processability and mechanical properties of blends of ethylene propylene diene terpolymer and bromobutyl rubber, 1988
Dr. Indranil BanikPhD Thesis : Electron beam modification of fluorocarbon elastomer, 1999
Dr. Amit NaskarPhD Thesis : Studies on thermoplastic elastomer and melt processable rubber based on ground rubber tyre (GRT) and surface modified GRT, 2001
Dr. Chanchal NeogiPhD Thesis : Mechanical properties of carbon black filled rubber vulcanizates at high temperature and under swollen conditions, 1990
Dr. Papiya SenPhD Thesis : Surface and bulk properties of electron beam modified EPDM rubber, 1999
Dr. Bhuwneesh KumarPhD Thesis : Processability of brominated isobutylene p-methyl styrene polymer, 2002
Dr. Swapan Kole PhD Thesis : Studies of silicone rubber-EPDM blends, 1994
Dr. Subiman GhoshPhD Thesis : Influence of block molecular weight on the properties of polyether amide block copolymer, 2000
Dr. Rajatendu SenguptaPhD Thesis : Modification of Polyamide-6, 6 by electron beam irradiation and nanofillers and studies of the properties of the modified polymers, 2007
Dr. Suman MitraPhD Thesis : Nanogels and Nanocomposite Gels: Preparation, Characterization and Their Effect on the Properties of Virgin Elastomers, 2010
Indian Institute of Technology Patna30
Dr. Amalendu SarkarM. Tech Thesis : Development Of Cap And Base Formulations For Improved Tyre Performance And Studies On Adhesion Between Cap And Base Compounds In Tire (1988)
Dr. Abhijit JhaM.Tech Thesis : Loss Of Antioxidants For Tyre Vulcanizates Due To Volatility And Leaching In Water At Different Conditions, (1995)
Vice President, Materials Technology
QURE MEDICAL 14932 BRANNOCK HILLS
DRIVECHARLOTTE, NORTH
CAROLINA, USA 28278Mobile: +001678-521-6349
Office land line: +001803-325-6235
E mail : [email protected]
Founder, Flow Management Consulting
Viman Nagar, Pune – 411014, India
Phone: 9890427611, 020-26501090
E-mail: [email protected]
Message to our Professor
Dr. Bhowmick is a great inspirational teacher. He has incredible gift of teaching. What I have seen in him during my long association as a M.Tech. and Ph.D. student – he has a passion for his profession, a vision for each student and really care about their outcome and result oriented.. I am proud that I got him as my teacher in my life and sincere thanks to him for all his valuable contribution in my life.
Message to our Professor
Sir, it’s a life time opportunity to be a student of yours and work under your guidance. Hard work and persistent effort will ultimately pay in life – the most valuable lesson we all have learnt from you. Thanks and kindest regards.
Research Booklet 31
Sanjoy BhattacharyyaM.Tech Thesis : Crack Growth Resistance Of Fluoroelastomer Vulcanizates.(1991)
Dr. Abdul KaderM.Tech Thesis : Influence Of New Adhesion Promoters On Physico Mechanical Properties Of Steel Cord Skim Compounds With Special Reference To Adhesion (1996)
Dy General Manager Hari Shankar Singhania
Elastomer and Tyre Research Institute (HASETRI)
Jay Kay Gram, PO: Tyre factory, Kankroli,
Rajasthan, Pin: 313342Mobile: +91 -9414786743Office land line: +91 2952-
232019/302473E mail : [email protected].
com sbhatta_1965@rediffmail.
com
Chief Manager (Technical)Central Institute of
Plastics Engineering & Technology(CIPET)
Plastics Testing Centre, Chennai
TVK Industrial Estate,Guindy, Chennai-600 032F2Residental address: Sushee
Enclave, Amutham Colony,
Guduvanchery, Kanjeepuram (Dt.), Tamilnadu
Phone: +919677123883, +91 44 22254708
E mail : [email protected]
Message to our Professor
Decades later I still feel that Prof Bhowmick continues to have enormous influence on his students. As his student I admire him because of his ocean of knowledge in the field of Rub-ber Science & Technology. I am always inspired by his tremendous dedication towards various innovative researches he has carried out in this special field. I wish he remains in best of health and spirit in the days to come
Message to our Professor
I consider Prof. A.K. Bhowmick as a role model for my professional life. He shows his passion for teaching and research amid his busy schedule of administering an institution. His achievements are highly commendable in the field of polymer science and Technology.
Indian Institute of Technology Patna32
Mr. Rangan MallikM.Tech Thesis : Effect Of Naturally Occurring Biopolymeric Filler On Tire Tread Compound (2001)
Mr. Darshan ShahM.Tech Thesis : Study Of Rubber Blends With Special Reference To Viscoelastic Properties & Modeling. (2004)
Senior ScientistAllergan Inc., USA
46 Echo RunIrvine, California 92614, USA
[email protected]: 1-949-689-3344
Partner – Rubber ConceptVisiting Faculty – Gujarat Technological University
10, Ramdev Estate, Nagarwel Hanuman Road, Rakhial,
Ahmedabad – 380023Mobile: +91 -99040 19924
E mail: [email protected]
Message to our Professor
Prof. Bhowmick’s hard work in a rather relaxed environment at IIT-KGP was very inspiring. He always challenged himself to do better and set same high standard for his students/researchers. His messages were always very clear and the expectation that normally he sets in a project is quite challenging which helps to get the best out of a student/researcher.
Message to our Professor
Thank you very much for being my mentor. You have not taught me only lessons of rubber but also lessons of life, which have helped me succeeding in career and life. You are not only a teacher but an awakener.
Research Booklet 33
Dr. Madhuchhanda MaitiM.Tech Thesis : Synthesis And Characterization Of Polymer-clay Nanocomposites Based On Different Saturated Rubbers And Rubber Plastics Blends. (2004)
Suchismita SahooM.Tech Thesis : Effect Of Zno And Polyhedral Oligomeric Silsesquioxanew (POSS) Nanoparticles On Rubber With Special Reference To Curing & Mechanical Properties (2006)
Senior Manager Reliance Ind. Ltd.
P.O. Petrochemicals, Vadodara-391346, GujaratMobile: +91-9998001079
Office land line: +91 2656696000
E mail : [email protected]
Materials EngineerJohn Deere India Pvt. Ltd.John Deere India Pvt. Ltd.
Tower-14, Cybercity,Magarpatta City
Hadapsar, Pune - 411013Mobile: +91 -9623826872
Office land line: +91 20 6648 1350
E mail : [email protected]
Message to our Professor
Today I would like to take the time to thank my mentor, Prof. Anil K. Bhowmick. He has made an everlasting impression on all of us. He has a great meter to measure your capacity and where you can continue to grow. I am truly blessed and lucky to work under his supervision. I would like to follow his leadership any day, at any given time.
Message to our Professor
Indian Institute of Technology Patna34
Pinka ChakrabortyM. Tech Thesis : Influence Of Phase Modification And Different Additives On The Morphology And Properties Of Thermoplastic Elastomers From Ethylene Propylene Diene Rubber And Isotactic Polypropylene (2007)
Sampa SahaM. Tech Thesis : Development of a novel water based eco-friendly adhesive from a plant-based gum [Terminalia Bellerica]
Sr. Engineer, VOLVO Group Trucks
Technology,Volvo India Pvt. Ltd.,
73/1, Brigade Metropolis, Summit-B,
11th & 12th Floor, Mahadevpura, Whitefield Road,
Bangalore – 560 048, Karnataka, India.
T +9180 6730 5890M +91 9916459420F +9180 6730 5200
Senior Research ChemistProchem Solutions Pte Ltd.
89C Science Park Drive#04-15/16 The Rutherford
Singapore 118261Mobile: +65 85521915
Office land line: +65 6872 6693
ext 113E mail : [email protected][email protected]
Message to our Professor
Dear Sir, I have learned many aspects of Rubber Science & Technology through your innovative teaching in class and during my research in M. Tech thesis. Publication of my work in interna-tional journals was really special of you. You had given opportunity to know and learn about ma-chines even during M. Tech. Your PhD research group was fantastic. Finding Anirban from your research –group as my life-partner was dream-come-true. Party at your residence was really special. Wish you all the very best for everything you do , please take care of your health.
Message to our Professor
An extraordinarily enthusiastic and energetic as well as caring and responsible adviser. We are proud of your achievements.
Research Booklet 35
Sandeep Gitaram TembherkarM. Tech Thesis : Development And Properties Of Low Hardness High Strength And Soft Touch Dry Feel Tpes & Blends From Polyolefins (2007)
Mr. Zubair AhmadM. Tech Thesis : Highly Transparent Polypropylene based Thermoplastic-Elastomer – Structure-Property Correlations (2008)
Balmer Lawrie & Co. Ltd, as Asst. Manager (QA)
Nageshwar Nagar, A/P-Moshi, Tal-Haweli, Dist-Pune,
Maharashtra, Pin - 412 105 Ph.- 08149990319
Manager (Reliance Technology Group, Polymers)
Reliance Industries Limited, Mumbai
Product Application & Research Centre,
Reliance Industries Limited,V N Purav Marg,
Chembur,Mumbai- 400 071Mobile:+91-77383 79385
Office land line: +91226767 7000 ext-7375
E mail : [email protected]@gmail.com
Message to our Professor
Dear Prof : Although highly educated and knowl-edgeable a good academician could also be kind, loving and inspiring for all others around him is a perfect example of respected Bhaumick Sir. All respect and gratitude for him
Message to our Professor
Association with Prof. Bhowmick was, indeed an unforgettable & incredible experience for me. I will always cherish the memories of those mo-ments in my life. Definitely, It is his passion & dedication towards research, which always gives a live example & guidance to me in my profes-sional as well as personal life. Lastly, I want to convey thanks & regards from the depth of my heart and wish him long, healthy & happy life.
Indian Institute of Technology Patna36
Dr. Sandip RoojM. Tech Thesis : Electron Induced Reactive Processing of Polypropylene/Epoxidised Natural Rubber (PP/ENR) Blend and Its Nanocomposites based on Layered Double Hydroxide (LDH) (2008)
Dr. Ing. Varun ThakurM. Tech Thesis : Modification Of Micro- & Nano-particles By Electron Treatment (2008)
ScientistLeibniz Institute of Polymer
Research DresdenHohestraße 6, Dresden,
GermanyMobile: +49-17670768929
E mail : [email protected]
Project Manager (R & D) Polymer Research &
Processing (Switzerland) 70, Guru Angad Nagar
Extension, Laxmi Nagar, Delhi - 110092
E-mail: [email protected]
Message to our Professor
First and foremost I would like to express my sin-cere gratitude to Sir for giving me the opportunity to carry out my master thesis under his kind su-pervision. I would also like to thank him for his valuable guidance, endless encouragement and support. I should not forget his valuable com-ments and suggestions related to different area of rubber chemistry and technology. Finally, I respect his friendly personality.
Message to our Professor
Prof. Bhowmick supervised my Masters thesis & I feel blessed to have got that valuable opportu-nity. I still remember his lectures on Adhesion, Physical testing of rubbers, & not to mention his diverse range of knowledge & expertise with which he guided his students. I would not hesitate to call him one of the pioneers of rubber technology around the world
Research Booklet 37
Mr. Sudip PradhanM.Tech Thesis : Synthesis and Characterization of Layered Double Hydroxide/ Elastomer Nanocomposites (2008)
Mr. G RajeshM.Tech Thesis : Structure – Property relationship of crosslinked silicone rubber and its nanocomposites (2009)
Scientist (DRDO)Naval Dockyard, Lion Gate
Indian NavyMumbai 400023
Mobile: +91-9619394497E mail:
Scientist ‘D’, Elastomers Division,
High Temperature Composite Center (HTCC)
Advanced Systems Laboratory, DRDO
Min. of Defence, Kanchanbagh P.O
Hyderabad-500035, Ph No.040-24584215
Email: [email protected]
Message to our Professor
My beloved teacher, thank you for giving unconditional support and patience, thank you for choosing teaching as your profession and sharing your knowledge to us. You have been a guiding beacon for me during my M. Tech and post M. Tech thesis. I am indebted to you for mentoring me in order to bring the best out of me. I would always strive to rise up to the high expectation set by you.
Message to our Professor
I congrats him for organizing international con-ference
Indian Institute of Technology Patna38
Dr. Bandana Talukdar Dr. Moumita RayResearch Associate : An investigation of the electromagnetic shielding effectiveness of ethylene vinyl acetate elastomer reinforced with carbon nanofillers
Ph. D.(Japan)Contacts: +913612331616;
+9401828416 (cell) Email:
3840 Bathurst Street, # 305Toronto, ON, Canada,M3H6C6
Mobile: 647-464-3032E mail : [email protected]
Message to our Professor
After my Ph.D. and a postdoctoral fellowship in Japan, I decided to work with Prof Bhowmick at IIT Patna as a postdoctoral research associate in 2010. I was working in IIT Patna from 2010-2012. During this period I got an opportunity to interact with him while conducting respon-sibilities like Laboratory Start-up activities for Polymer Engineering Laboratory and Materials Research Laboratory & management, research and teaching activities which led to significant gains in my professional experiences. It was a great opportunity for me to learn various aspects of academics through my interaction with him which complemented my training abroad. Prof Bhowmick is a versatile researcher with thorough knowledge base who can inspire and motivate creative independent thinkers. He possess great leadership qualities to move any hurdles ahead. Due to his background in chemical science and technology he has a good understanding of the overall technology landscape and its impact on work which makes him able to adapt and evolve ahead of the competition. It has been a pleasure to work with Professor, Director Anil Kumar Bhowmick in IIT Patna. Thanks.
Message to our Professor
It was a memorable opportunity for me to be a part your group and work with you and team. After so many years I still feel bonded. I highly appreciate you for all your valuable guidance and support you extended selflessly whenever I needed. Wish you all the very best for everything, and thank you so much for being there as an eternal inspiration.
Research Booklet 39
Pawan KumarResearch area : Modification of rubbers
Intern: May, 2013 – July, 2013Integrated MS:Pursuing, IISER
Kolkata, IndiaE-mail: pkiiserk.124@gmail.
com
Message to our Professor
I had a lifetime opportunity to conduct my project under supervision of Prof. Bhowmick, an epitome of erudition, a caring friend, a disciplinarian, yet always so approachable and warm hearted. We feel blessed that, eminent scientists like Prof. Bhowmick, are leading us, taking responsibility of fledgling institutes like IIT-Patna to get to the zenith of scientific explorations.
Dr. Jayasree Konar LahaAssociate Professor & Head, PG Department of Chemistry, Midnapore College, Midnapore, West-BengalEmail: [email protected] Message to our Professor: I wish Prof. Bhowmick good health.
Pinaki LohaM.Tech Thesis: Studies On Adhesion Between Polybutadiene And Natural Rubber In Tire Compounds (1986)
Supriyo K. GhoshM. Tech Thesis: Studies On The Development Of The Heat Resistant Conveyor Belting Compounds With Special Reference To Adhesion Between Rubber To Rubber (1986)
Partha Pratim SarkarM. Tech Thesis: Studies On The Development Of A Heat & Abrasion Resistant Conveyor Belting Compound With Special Reference To Adhesion Between Rubber To Fabric (1986)
Bidyut ChakrabortyM.Tech Thesis: Studies On Adhesion Between Rubber To Rubber Joints And Physical Properties Of Rubber Blends With Reference To Adhesion (1987)
Murshid HasanM.Tech Thesis: Inluence On Bonding Additives On Rubber To Steel Cord Adhesion In Presence Of Various Accelerators (1989)
Indian Institute of Technology Patna40
Tapan Paul
Prabhas Ghosh M. Tech Thesis: Development Of Hydrogenated Nitrile Rubber Based V-belts. (1998)
Ankit JainM. Tech Thesis: New Approach To The Water Injection Technique (Wit) With Regard To The Injector Technology And The Processing Of Tpes. (2003)
Soman CM. Tech Thesis: Oil Resistant Thermoplastic Elastomers Based On Blends Of Acrylonitrile Butadiene And High Density Polyethylene (1998)
Lt. Pradeep BiswasM. Tech Thesis: Hysterisis Loss Of Filled And Unfilled Acrylonitrile Butadiene Rubber Vulcanizates (2000)
Sandip GuptaM. Tech Thesis: Development Of Shoe Sole And Football From Thermoplastic Elastomer Blends And High Temperature Conveyor Belts From Epdm-bromobutyl Blends (1990)
Debabrata RayM.Tech Thesis: Influence Of Structure Of Special Grade Carbon Black On The Mechanical And Dynamic Mechanical Properties & Heat Generation Of A Tyre Tread Compound (2000)
Suprakash NayakM.Tech Thesis: Development Of Color Tyre Tread Compounds And Study Of Their Wear Behavior (2004)
Dibyanshu SinhaM.Tech Thesis: Design And Development Of Elastomeric Inflatable Seals (2000)
Sanjay PatelM.Tech Thesis: Effect Of Acrylic Copolymer And Terpolymer Composition On The Properties Of Polymer Nanocomposites (2005)
Amulya Kali RayM. Tech Thesis: Modification Of Epdm And Its Application In Rubber Blends (1995)
Debjyoti DattaM.Tech Thesis: Development Of Ecofriendly Radial Passenger Tyre Tread Formulation (2002)
Biju K. Jos M.Tech Thesis: Influence Of Blowing Agents And Filler Concentration On The Properties Of Natural Rubber And Epoxidized Natural Rubber Based Microcellular Compounds (1998)
Jaydeep D. Patel PhD Thesis : Studies of silicone rubber-EPDM blends, 1994
Kalaivani S M.Tech Thesis: Influence Of Radiation Temperature On The Crosslinking Of Nitrile Rubber, Their Composites & Blends By Electron Beam Irradiation. (2006)
The names of PhD and M-Tech student mentioned in the booklet are representative only. This list was collated based on successful communication with the contributors by the editorial members of this booklet within a short time. Apart from them, there are many well wishers of Professor Anil K Bhowmick throughout the world which also include B-Tech. M-Tech and Ph.D. students of IIT Kharagpur (1984-2009) and B-Tech/PhD students of IIT Patna (2009-till date), We all wish him a healthy and happy life ahead in upcoming days.
Indian Institute of Technology Patna