Bonney forge cataloge

7/29/2019 Bonney forge cataloge

1/22

Forged Stee

FittingS

& UnionS


2/22

SaleS Center/WarehouSe14496 Croghan Pike

P.o. Box 330Mt. union, Pa 17066

(814) 542-2545 (800) 231-0655(800) 345-7546 Fax (814) 542-9977

www.byf.cm-m: [email protected]


3/22

Table Of COnTenTs

Cp ovvw ................................................................................ 2, 3

Cdsd Dscp ........................................................................... 4, 5

Scket Wed Fittis- Css 3000 & 6000 ................................................... 6

Scket Wed Fittis- Css 9000 ............................................................... 7

Threded Fittis- Css 2000, 3000 & 6000 .............................................. 8

Ql90tM .............................................................................................. 9

Scket Wed Cupis, Reducers & Cps- Css 3000 & 6000 ................ 10

Threded Cupis, Reducers & Cps- Css 3000 & 6000 ..................... 11

Scket Wed Reducer Iserts- Css 3000, 6000 & 9000 .......................... 12

Threded Pus & Bushis ..................................................................... 13

MSS-SP-83 us .................................................................................. 14

rcwd us .................................................................................... 15

l n us ........................................................................................ 16


4/222

Bnny F - T Cmany yu

y n f Fd St Fttns

and Unns

Since 1967, one name has been syn-

onymous with premier Forged Steel

Fittings and Unions Bonney Forge.

Our continued investment in new

technology helps maintain a constant

level of superior quality in our prod-

ucts, which is unparalleled in the

industry. Some of this new technology

includes, state-of-the-art machin-ing centers, which reduce product

variability while increasing product

serviceability and laser marking ma-

chines, which increases our capability

to provide part information even on

the smallest of components.

Backing by the most comprehensive

product line in the industry and an

extensive inventory that makes allour products readily available, Bonney

Forge is the number one resource for

the power, oil, chemical, marine, and

construction industries through-out

the world.

Dndab, Duab,

Unfm and Accuat

Our unparalleled, integrated, state of

the art manufacturing facility allows

Bonney Forge to develop products

at the highest volume, all of which

define the Bonney Forge mission

consistent unyielding quality. The tight

control we maintain over our manu-

facturing process has earned Bonney

Forge ISO-9001 recognition. Addition-

ally, products are inspected to the

strict requirements of ASME B16.11,

MSS SP-79, and MSS SP-83.

A T Fttns Yu Nd

Our fittings come in a variety of

classes and material grades for anyapplication. Socket Weld fittings are

available in class 3000, 6000 and

9000. Threaded fittings are available

in class 2000, 3000, and 6000.

Threaded couplings, reducers, unions,

half couplings and caps are available

in class 3000 and 6000. Socket Weld

couplings, reducers, half couplings and

reducer inserts are available in class

3000, 6000 and 9000.

Other specialty designed products are

available upon request including the

following:

ReducingTees

Multipleendconfigurations

Speciallengthcouplings

Wealsoconsidercustomer

specific drawings


5/223

This catalog lists for your convenience

the complete line of Bonney Forge steel

fittings and unions including:

ForgedSteelFittings

MSSSP-83Unions

RockwoodUnions

LugNutUnions

QuikLeg90


6/22

PressureRatingsforBonneyForge

Forged Steel Fittings comply with

ASME B16.11. The allowable pressure

rating for fittings are equivalent to the

pressure ratings of the corresponding

pipe listed in the table below.

The fitting is suitable for the application

if the wall thickness of the selected

pipe is equal to or less than the

ASMEB36.10MScheduleNo.or

Wall Designation pipe wall thickness

correlated with the fitting in the

table below.

The maximum pressure rating of comparable pipe material to fitting material can be

calculated. Such calculations are in accordance to the ASME Piping Codes, as an example,

ASME B31.1 2010, Power Piping, Paragraph 104.1.21 which outlines the following

variables and equation:

P = PressureRating

SE = AllowableStress(@temperature)(ReferenceASMEB31.3.TableA-1)

tm = Wall Thickness

A = Corrosion Allowance (Typically = 0)

Do = Outer Diameter of Pipe

Y = Table 104.1.2 (A) of ASME B31.1 (0.4 if temperature is less than 900F)

4

TeChniCal DaTa

ForgeD FiTTiNgS: ASMe B16.11 - Tab 71

ClASS oF FiTTiNg TYpe Size pipe USeD For rATiNg BAS

2000 Threaded nPS 1/8 - 4 Scd 80 (SCh 80)/e S

3000 Threaded nPS 1/8 - 4 Scd 160 (SCh 160)

6000 Threaded nPS 1/8 - 4 Db e S (xxS)

3000 SockeT-weld nPS 1/8 - 4 Scd 80 (SCh 80)/e S

6000 SockeT-weld nPS 1/8 - 4 Scd 160 (SCh 160)

9000 SockeT-weld nPS 1/8 - 4 Db e S (xxS)

PiPe sCheDule equivalenCy

PiPe Pressure CalCulaTiOns

P =2 Se (Tm a)

d 2y (Tm a)


7/22

The calculated pipe pressure in accordance to ASME B31.3 Process Piping 2 are

calculated in accordance with Para. 304.1.2. Please see the equations and variables below:

P = PressureRating

D = Outer Diameter of Pipe

S = Allowable Stress (@ Temperature): Table A-1

E = QualityFactor:TableA-1AorA-1B

W = WeldJointStrengthReductionFactor:Para.302.3.5(e)(Typically=1.0)

t = Pipe Wall Thickness

Y = Table 304.1.1 or Intermediate Temperature Interpolations (Below Equation)

D = Outer Diameter of Pipe

d = Inside Diameter of Pipe

c = Sum of Mechanical Allowances plus Corrosion and Erosion Allowances

Threaded: Dimension h of ASME B1.20.1 or Equivalent

Machined Surfaces or Grooves: Specified Tolerance (or 0.02in plus Specified Depth of Cut; when tolerance is not specified)

5

t =Pd

2 (Sew + PY)

y =d + 2

d + + 2

P =2tSew

d 2tYor


8/224

sOCkeT WelD/ThreaDeD fiTTings

Plugs & bushings

COnDenseD DesCriPTiOn

90 eb1/4" 4" css 2000 dd

1/8" 4" css 3000 dd& scket wed

1/8" 4" css 6000 dd

1/8" 4" css 6000

sc wd

1/2" 2" css 9000sc wd

T1/4" 4" css 2000 dd

1/8" t 4" css 3000 threded &sc wd

1/8" 4" css 6000 dd

1/8" 4" css 6000 sc wd

1/2" 2" css 9000 sc wd

45 eb1/4" 4" css 2000 dd

1/8" 4" css 3000threded & scket wed

1/8" 4" css 6000 dd

1/8" 4" css 6000sc wd

1/2" 2" css 9000sc wd

lt1/4" 2" css 3000 dd

1/4" 2" css 3000 sc wd

3/8" 1 1/2" css 6000 dd

1/2" 2" css 6000sc wd

1/2" 1 1/2" css 9000sc wd

Stt eb1/8" 2" css3000 dd

1/4" 1 1/2"css 6000dd

css1/4" t 4" css 2000, 3000 & 6000dd

1/8" 4" css 3000 sc wd

1/8" 4" css 6000 sc wd

1/2" 2" css 9000 sc wd

run h Pug1/8" 4" m ppszs

hxgn Pug1/8" 4" m ppszs

Squ h Pug1/8" 4" m ppszs

hxgn Busing1/8" 4" m ppszs

Fus Busing1/8" 4" m ppszs

avb css 3000, 6000 d 9000 ( pss) sc wd fs;

s, css 2000, 3000 d 6000 dd fs.

Quilg90TM

3/4" t 2" css 3000 & 6000sc wd

1/2" 1 1/2" css 9000sc wd

1/2" 2" css 3000 dd

1/2" 1 1/2" css 6000 dd

2" 4" StD/xS b wd


9/225

COnDenseD DesCriPTiOn

COuPlings, reDuCers & CaPs

reDuCer inserTs

uniOns

Pip cp1/8" 4" css3000

1/8" 2" css6000 threded &

sc wd

hf cuping1/8" 4" css 3000& 6000 threded &sc wd

1/2" 2" css 9000

sc wd y

cuping1/8" 4" css 3000& 6000 threded &sc wd

1/2" 2" css 9000

sc wd y

ru1/4" 4" css 3000& 6000 threded &sc wd

1/2" 2" css 9000

sc wd y

Typ 1nm pp szsfm 1/4" 1/8" 2" 1 1/2"

Typ 2nm pp szsfm 1/2" 1/4" 2" 1 1/4"

MSS-SP-83accmds 1/8" 3" pp css 3000d 1/8" 2" pp css 6000

rFr use with 1/8" t 2" pipe. 1/8" t 2"dd cc. 1/8" 2" scwd-sss s y.

avb css 3000 d 6000. Spc szs d ws vb qs.

Sc wd dc ss vb css 3000, 6000 d 9000. issscd vs ms. Cs fcy f spc ppcs.

Bey Fre MSS-SP-83 threded d scket wed uis i css 3000 d 6000. UseBey Fre Rckwd Uis fr the utimte i perti d durbiity.

lug Nut3/8" t 4" css 3000 threded &sc wd


10/226

Class 3000

Class 6000

sOCkeT WelD fiTTings

ClASS

3000-Schdu

40

Bor

NoMiNAl pipe Size 1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4

90el Tee a 7/8 7/8 31/32 1 1/8 1 5/16 1 1/2 1 3/4 2 2 3/8 3 3 3/8 4 3/16laT B 29/32 29/32 1 1/16 1 5/16 1 9/16 1 27/32 2 7/32 2 1/2 3 1/32 3 11/16 4 5/16 5 3/4

(Min.) D 3/8 3/8 3/8 3/8 1/2 1/2 1/2 1/2 5/8 5/8 5/8 3/4

45el a 7/8 7/8 31/32 1 1/8 1 5/16 1 1/2 1 3/4 2 2 3/8 3 1/4 3 3/4 4 1/2croSS B 29/32 29/32 1 1/16 1 5/16 1 9/16 1 27/32 2 7/32 2 1/2 3 1/32 4 4 3/4 6

(Min.) D 3/8 3/8 3/8 3/8 1/2 1/2 1/2 1/2 5/8 5/8 5/8 3/4

e 7/16 7/16 17/32 5/8 3/4 7/8 1 1/16 1 1/4 1 1/2 1 5/8 2 1/4 2 5/8F 3/4 3/4 3/4 1 1 1/8 1 1/4 1 5/16 1 3/8 1 11/16 2 1/16 2 1/2 3 1/8g 5/16 5/16 5/16 7/16 1/2 9/16 11/16 13/16 1 1 1/8 1 1/4 1 5/8

k 1 7/8 2 1/8 2 9/16 3 3 1/2 3 15/16 4 3/4l 2 11/16 3 3 9/16 4 1/8 4 13/16 5 3/8 6 7/16

DiMeNSioNS (ncs)

DiMeNSioNS C (common to .420 .555 .690 .855 1.065 1.330 1.675 1.915 2.406 2.906 3.535 4.545all fittings)

WeighT (unds)

90 elBoW .125 .183 .270 .460 .698 .987 1.480 2.088 3.125 6.340 10.867 25.0045 elBoW .125 .198 .210 .440 .673 .935 1.365 1.63 2.71 6.75 10.50 18.188

tee .25 .25 .345 .540 .925 1.307 2.00 2.640 4.070 8.75 12.50 27.80

Street elBoW .25 .25 .375 .50 .875 1.438 2.25 3.00 5.188lateral .25 .625 1.00 1.500 2.375 3.75 4.125 6.285

CroSS .25 .25 .375 .813 1.125 1.550 2.25 3.063 5.125 18.00 23.00 40.00


a 7/8 31/32 1 1/8 1 5/16 1 1/2 1 3/4 2 2 3/8 2 1/2 3 1/4 3 3/4 4 1/2B 29/32 1 1/16 1 5/16 1 9/16 1 27/32 2 7/32 2 1/2 3 1/32 3 11/32 4 4 3/4 6

(Min.) D 3/8 3/8 3/8 3/8 1/2 1/2 1/2 1/2 5/8 5/8 5/8 3/4

e 7/16 17/32 5/8 3/4 7/8 1 1/16 1 1/4 1 1/2 1 5/8 2 1/4 2 1/2 2 3/4F 3/4 3/4 1 1 1/8 1 1/4 1 5/16 1 3/8 1 11/16 1 3/4 2 1/16 2 1/2 3 1/8

g 5/16 5/16 7/16 1/2 9/16 11/16 13/16 1 1 1/8 1 1/4 1 3/8 1 5/8

k 2 1/8 2 9/16 3 3 1/2 3 15/16 4 3/4 5l 3 3 9/16 4 1/8 4 13/16 5 3/8 6 7/16 6 5/8

DiMeNSioNS C (common to .420 .555 .690 .855 1.065 1.330 1.675 1.915 2.406 2.906 3.535 4.545all fittings)

WeighT (unds)

90 elBoW .938 1.440 2.348 3.188 5.25 6.660 11.875 19.25 32.7045 elBoW .875 1.313 1.913 2.27 4.313 4.813 9.625 14.25 27.25

tee 1.375 2.00 3.313 3.75 7.480 8.240 16.625 23.50 33.00

Street elBoW .375 .438 1.00 1.625 2.50 3.688 6.438lateral 2.00 3.063 5.125 6.25 11.938 12.5

CroSS 1.50 2.50 3.460 5.25 8.75 9.438 20.25 27.00 39.00

DiMeNSioNS (ncs)

ClASS

6000-Schdu

160

Bor


11/227

Class 9000

sOCkeT WelD fiTTings

NoMiNAlpipe Size 1/2 3/4 1 1 1/4 1 1/2 2

a 1 1/2 1 3/4 2 2 3/8 2 1/2 3

B 1 27/32 2 7/32 2 1/2 3 1/32 3 11/32 3 11/16

(Min.) D 3/8 1/2 1/2 1/2 1/2 5/8e 1 1 1/8 1 1/4 1 3/8 1 1/2 2 1/8

DiMeNSioNS (ncs)

WeighT (unds)

W 1.44 2.25 3.19 5.25 6.69 6.69

ClASS 9000 XXS Bore- 90 elBoW


a 1 1/2 1 3/4 2 2 3/8 2 1/2 3

B 1 27/32 2 7/32 2 1/2 3 1/32 3 11/32 3 11/16(Min.) D 3/8 1/2 1/2 1/2 1/2 5/8

e 1 1 1/8 1 1/4 1 3/8 1 1/2 2 1/8

WeighT (unds)

W 2.00 3.31 3.75 6.50 7.88 8.75

ClASS 9000 XXS Bore- Tee

DiMeNSioNS (ncs)


B 1 27/32 2 7/32 2 1/2 3 1/32 3 3/8 4

(Min.) D 5/8 9/16 9/16 13/16 3/4 15/16

F 1 1/4 1 5/16 1 3/8 1 11/16 1 3/4 2 1/16

g 5/8 3/4 13/16 7/8 1 1 1/8

DiMeNSioNS (ncs)

WeighT (unds)

W 1.31 2.06 2.50 4.31 4.81 9.62

ClASS 9000 XXS Bore- 45 elBoW


B 1 27/32 2 7/32 2 1/2 3 1/32 3 11/32

(Min.) D 9/16 5/8 11/16 7/8 7/8k 3 3 1/2 3 15/16 4 3/4 5

l 4 1/8 4 13/16 5 3/8 6 7/16 6 5/8

WeighT (unds)

W 1.75 2.38 3.75 6.88 6.88

ClASS 9000 XXS Bore- lATerAl

DiMeNSioNS (ncs)


a 1 1/2 1 3/4 2 2 3/8 2 1/2 3 1/4

B 1 27/32 2 7/32 2 1/2 3 1/32 3 11/32 4

(Min.) D 1/2 5/8 3/4 1 1 1 1/8

e 1 1 1/8 1 1/4 1 3/8 1 1/2 2 1/8

DiMeNSioNS (ncs)

WeighT (unds)

W 2.50 4.12 4.12 5.12 9.44 22.19

ClASS 9000 XXS Bore- CroSS


a 1 3/8 1 1/2 1 3/4 1 7/8 2 2 1/2

B 1 13/16 2 2 3/8 2 3/4 3 1/16 3 5/8(Min.) D 1/2 9/16 5/8 11/16 3/4 7/8

e 3/8 3/8 1/2 1/2 1/2 3/4

F

WeighT (unds)

Coupling .75 1.06 1.69 2.22 2.81 4.66Reducer .75 1.06 1.69 2.22 2.81 4.66

Half Coupling .88 1.16 1.88 2.50 3.25 5.38

ClASS 9000 XXS Bore- CoUpliNgS- reDUCerS- hAlF CoUpliNg

DiMeNSioNS (ncs)


C .855 1.065 1.330 1.675 1.915 2.406

DiMeNSioNS C - CoMMoN To All FiTTiNgS (ncs)


12/228

Class 2000

Class 3000

ThreaDeD fiTTings

Class 6000


a 7/8 31/32 1 1/8 1 5/16 1 1/2 1 3/4 2 2 3/8 2 1/2 3 1/4 3 3/4 4 1/2B 29/32 1 1/16 1 5/16 1 9/16 1 27/32 2 7/32 2 1/2 3 1/32 3 11/32 4 4 3/4 6F 3/4 3/4 1 1 1/8 1 1/4 1 5/16 1 3/8 1 11/16 1 3/4 2 1/16 2 1/2 3 1/8h 1 1/4 1 1/4 1 1/2 1 5/8 1 7/8 2 1/4 2 5/8 2 15/16 3 5/16

J 7/8 7/8 1 1 1/8 1 3/8 1 3/4 2 2 1/8 2 1/2k 1 7/8 2 1/8 2 9/16 3 3 1/2 3 15/16 4 3/4 5l 2 11/16 3 3 9/16 4 1/8 4 13/16 5 3/8 6 7/16 6 5/8

WeighT (unds)

90 elBoW .236 .350 .592 .973 1.355 2.265 2.407 3.50 5.920 11.900 14.438 31.97545 elBoW .25 .290 .50 .75 1.188 1.988 2.235 3.00 4.930 7.375 13.558 19.063

tee .325 .460 .753 1.270 1.830 3.025 3.620 7.040 7.550 13.125 23.100 40.000

Street elBoW .264 .242 .375 .595 1.048 1.438 2.340 3.00 5.461lateral .625 1.313 1.75 2.75 4.625 5.50 10.813 11.5

CroSS .438 .567 .970 1.50 2.50 3.620 4.125 6.50 8.125 16.75 25.675 32

DiMeNSioNS (ncs)

ClA

SS

3000


90el Tee a 31/32 1 1/8 1 5/16 1 1/2 1 3/4 2 2 3/8 2 1/2 3 1/4 3 3/4 4 3/16 4 1/2STel laT B 1 1/16 1 5/16 1 9/16 1 27/32 2 7/32 2 1/2 3 1/32 3 11/32 4 4 3/4 5 3/4 6

F 3/4 1 1 1/8 1 1/4 1 5/16 1 3/8 1 11/16 1 3/4 2 1/16 2 1/2 3 1/8 3 1/8h 1 1/4 1 1/2 1 5/8 1 7/8 2 1/4 2 5/8 2 15/16 3 5/16

45el a 31/32 1 1/8 1 5/16 1 1/2 1 3/4 2 2 3/8 2 1/2 3 1/4 3 3/4 4 1/2 4 1/2croSS B 1 1/16 1 5/16 1 9/16 1 27/32 2 7/32 2 1/2 3 1/32 3 11/32 4 4 3/4 6 6

F 3/4 1 1 1/8 1 1/4 1 5/16 1 3/8 1 11/16 1 3/4 2 1/16 2 1/2 3 1/8 3 1/8

J 1 1 1/8 1 3/8 1 3/4 2 2 1/8 2 1/2k 2 9/16 3 3 1/2 3 15/16 4 3/4 5l 3 9/16 4 1/8 4 13/16 5 3/8 6 7/16 6 5/8

WeighT (unds)

90 elBoW .25 .625 1.023 1.625 2.625 3.50 6.75 7.50 13.438 20.875 39.050 3845 elBoW .25 .640 .50 1.438 2.188 2.785 4.688 5.75 9.50 15 30.563 29

tee .50 .853 1.410 2.150 3.563 4.625 7.625 9.625 18.500 28.063 47.500 50

Street elBoW .375 .438 1 1.625 3.030 3.688 7.120lateral 2.375 3.25 5.438 7.188 12.313 15.95

CroSS .563 1.188 1.50 2.75 4.313 6.625 10.75 11.50 22.188 27.50 54 43.50

DiMeNSioNS (ncs)

ClASS

6000

ClASS

2000


90el Tee a 7/8 31/32 1 1/8 1 5/16 1 1/2 1 3/4 2 2 3/8 3 3 3/8 4 3/16STel laT B 29/32 1 1/16 1 5/16 1 9/16 1 27/32 2 7/32 2 1/2 3 1/32 3 11/16 4 5/16 5 3/4

F 3/4 3/4 1 1 1/8 1 1/4 1 5/16 1 3/8 1 11/16 2 1/16 2 1/2 3 1/8

45el a 7/8 31/32 1 1/8 1 5/16 1 1/2 1 3/4 2 2 3/8 3 1/4 3 3/4 4 1/2croSS B 29/32 1 1/16 1 5/16 1 9/16 1 27/32 2 7/32 2 1/2 3 1/32 4 4 3/4 6

F 3/4 3/4 1 1 1/8 1 1/4 1 5/16 1 3/8 1 11/16 2 1/16 2 1/2 3 1/8

DiMeNSioNS (ncs)

WeighT (unds)

90 elBoW .25 .198 .283 .500 .773 1.013 1.550 2.180 3.140 6.50 10.925 26.67545 elBoW .125 .188 .236 .435 .740 1.058 1.375 1.740 2.883 7.75 11.313 19.125

tee .25 .267 .373 .613 .963 1.355 2.030 2.800 4.456 9.530 12.908 28.700

CroSS .50 .50 .460 .777 1.125 1.688 2.450 3.188 5.560 16.438 19.50 32.688


13/229

quikleg90 - sOCkeT WelD - ThreaDeD - buTT WelD

Class 3000

Class 6000std-Xstg

ClASS6

000

a nm - 1 1/2 1 3/4 2 2 3/8 2 1/2 1 1/2 1 3/4 2 2 3/8 2 1/2 -

B nm - 1 7/8 2 3/16 2 1/2 3 3 1/8 1 7/8 2 3/16 2 1/2 3 3 1/8 -

C nm - 1 1/2 1 3/4 2 2 3/8 2 1/2 1 1/2 1 3/4 2 2 3/8 2 1/2 -

SoCkeT WelD ThreADeDDiMeNSioNS(ncs)

NoMiNAl pipe Size 1/2 3/4 1 1 1/4 1 1/2 2 1/2 3/4 1 1 1/4 1 1/2 2

ClASS

3000

a nm - 1 1/2 1 1/2 1 3/4 2 2 3/8 1 1/2 1 1/2 1 3/4 2 2 3/8 2 1/2

B nm - 1 7/8 1 7/8 2 3/16 2 1/2 3 1 7/8 1 7/8 2 3/16 2 1/2 3 3 1/8

C nm - 1 1/2 1 1/2 1 3/4 2 2 3/8 1 1/2 1 1/2 1 3/4 2 2 3/8 2 1/2

SoCkeT WelD ThreADeDDiMeNSioNS(ncs)

NoMiNAl pipe Size 1/2 3/4 1 1 1/4 1 1/2 2 1/2 3/4 1 1 1/4 1 1/2 2

STD-

XSTg

a nm 2 3/8 3 3 3/8 4 3/16

B nm 3 3 3 3/8 4 3/16

C nm 2 3/8 3 3 3/8 4 3/16

DiMeNSioNS(ncs)

NoMiNAl pipe Size 2 2 1/2 3 4

BUTT WelD

Sckt Wl

Thr

Butt Wl


14/2210

sOCkeT WelD COuPlings, reDuCers & CaPs

Class 3000

Class 6000


a 1 1/16 1 1/16 1 1/8 1 3/8 1 1/2 1 3/4 1 7/8 2 2 1/2 2 1/2 2 3/4 3aa 1 1/32 1 1/32 1 1/32 1 3/16 1 13/32 1 33/64 1 33/64 1 33/64 2 1/64 2 1/64 2 1/64 2 17/64B 3/4 7/8 1 1/16 1 1/4 1 1/2 1 13/16 2 1/4 2 1/2 3 3 5/8 4 5/16 5 1/2

C .420 .555 .690 .855 1.065 1.330 1.675 1.915 2.406 2.906 3.535 4.545(Min.) D 7/16 7/16 7/16 1/2 9/16 5/8 11/16 3/4 7/8 7/8 1 1 1/8

e 1/4 1/4 1/4 3/8 3/8 1/2 1/2 1/2 3/4 3/4 3/4 3/4F 11/16 3/4 3/4 7/8 1 1 1/16 1 3/16 1 1/4 1 1/2 1 9/16 1 13/16 2 1/16

WeighT (unds)

CouPling .125 .125 .125 .188 .313 .563 .813 1 2 2.625 3.875 6.625reDuCer .125 .125 .125 .188 .313 .563 .813 1 2 2.625 3.875 6.625

HalF CoUPlIng .125 .125 .125 .188 .313 .563 .813 1 2 2.625 3.875 6.625

PiPe CaP .063 .063 .125 .188 .313 .563 .813 1.125 1.688 3 3.625 6.688

DiMeNSioNS (ncs)

ClASS

3000

NoMiNAl pipe Size 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4

a 1 1/8 1 1/8 1 3/8 1 1/2 1 3/4 1 7/8 2 2 1/2 2 1/2 2 3/4 3aa 1 1/8 1 1/8 1 5/32 1 13/32 1 33/64 1 33/64 1 33/64 2 1/64 2 1/64 2 1/64 2 17/64

B 1 1/16 1 5/16 1 1/2 1 3/4 2 1/4 2 1/2 3 3 5/8 4 1/4 5 6 1/4

C .555 .690 .855 1.065 1.330 1.675 1.915 2.406 2.906 3.535 4.545(Min.) D 7/16 7/16 1/2 9/16 5/8 11/16 3/4 7/8 7/8 1 1 1/8

e 1/4 1/4 3/8 3/8 1/2 1/2 1/2 3/4 3/4 3/4 3/4F 15/16 15/16 1 1 1/16 1 1/4 1 5/16 1 3/8 1 5/8 1 11/16 1 15/16 2 5/16

WeighT (unds)

CouPling .375 .563 1 1.438 2 3.875 5.50 6.625 13.125reDuCer .375 .563 1 1.438 2 3.875 5.50 6.625 13.125

HalF CoUPlIng .375 .563 1 1.438 2 3.875 5.50 6.625 13.125

PiPe CaP .375 .50 1.125 1.125 2.25 3.50 5.625 6 13.50

DiMeNSioNS (ncs)

ClASS

6000


15/2211

ThreaDeD COuPlings, reDuCers & CaPs

Class 3000

Class 6000


a 1 1/4 1 3/8 1 1/2 1 7/8 2 2 3/8 2 5/8 3 1/8 3 3/8 3 5/8 4 1/4 4 3/4B 3/4 3/4 7/8 1 1/8 1 3/8 1 3/4 2 1/4 2 1/2 3 3 5/8 4 1/4 5 1/2

C 5/8 11/16 3/4 15/16 1 1 3/16 1 5/16 1 9/16 1 11/16 1 13/16 2 1/8 2 3/8D 15/16 1 1 1 1/4 1 7/16 1 5/8 1 3/4 1 3/4 1 7/8 2 3/8 2 9/16 2 11/16

WeighT (unds)

CouPling .125 .125 .25 .25 .438 .625 1.563 2.188 3.125 4 6.75 16.75reDuCer .125 .125 .25 .25 .438 .625 1.563 2.188 3.125 4 6.75 16.75

HalF CoUPlIng .063 .063 .188 .188 .25 .313 .75 1.125 1.563 2 3.375 8.375

PiPe CaP .031 .063 .125 .25 .313 .50 1 1.625 3.125 5 8.50 14

DiMeNSioNS (ncs)

ClASS

3000


a 1 1/4 1 3/8 1 1/2 1 7/8 2 2 3/8 2 5/8 3 1/8 3 3/8 3 5/8 4 1/4 4 3/4B 7/8 1 1 1/4 1 1/2 1 3/4 2 1/4 2 1/2 3 3 5/8 4 1/4 5 6 1/4

C 5/8 11/16 3/4 15/16 1 1 3/16 1 5/16 1 9/16 1 11/16 1 13/16 2 1/8 2 3/8D 1 1 1/16 1 1/16 1 5/16 1 1/2 1 11/16 1 13/16 1 7/8 2 2 1/2 2 11/16 2 15/16

WeighT (unds)

CouPling .188 .188 .25 .50 1 2.125 2.375 4.375 7.75 10.75 13.50 24.50reDuCer .188 .188 .25 .50 1 2.125 2.375 4.375 7.75 10.75 13.50 24.50

HalF CoUPlIng .094 .094 .125 .25 .50 1.063 1.188 2.188 3.875 5.375 6.75 12.25

PiPe CaP .125 .125 .188 .313 .438 .75 1.313 1.688 3.25

DiMeNSioNS (ncs)

ClASS

6000


16/2212

sOCkeT WelD reDuCers inserTs(Mss-sP79)

Class 3000

Class 6000Class 9000

3/8 1/4 .675 .555 1 7/16 3/4 15/16 1 7/16 7/8 1

1/2 3/8 .850 .690 1 7/16 13/16 1 1/16 1 7/16 15/16 1 3/16

1/2 1/4 .850 .555 1 7/16 13/16 15/16 1 7/16 7/8 1

3/4 1/2 1.060 .855 1 7/16 7/8 1 5/16 1 7/16 1 1/16 1 3/8 1 7/16 1 3/16 1 3/4

3/4 3/8 1.060 .690 2 7/16 5/8 - 1 7/16 7/8 1 3/16

3/4 1/4 1.060 .555 2 3/8 11/16 - 2 3/8 7/8 -

1 3/4 1.325 1.065 1 9/16 15/16 1 1/2 1 9/16 1 1/8 1 11/16 1 9/16 1 1/4 2

1 1/2 1.325 .855 2 1/2 5/8 - 1 7/16 1 1/8 1 3/8 1 7/16 1 1/8 1 3/4

1 3/8 1.325 .690 2 7/16 11/16 - 2 1/2 7/8 -

1 1/4 1.325 .555 2 3/8 3/4 - 2 3/8 15/16 -

1 1/4 1 1.670 1.330 1 9/16 1 1 7/8 1 9/16 1 3/16 2 1 9/16 1 3/8 2 3/8

1 1/4 3/4 1.670 1.065 2 9/16 11/16 - 2 9/16 13/16 - 1 9/16 1 3/16 2

1 1/4 1/2 1.670 .855 2 1/2 3/4 - 2 1/2 7/8 - 2 1/2 7/8 -1 1/4 3/8 1.670 .690 2 7/16 13/16 - 2 7/16 15/16 -

1 1/4 1/4 1.670 .555 2 3/8 7/8 - 2 3/8 1 -

1 1/2 1 1/4 1.910 1.675 1 9/16 1 1/8 2 1/4 1 9/16 1 3/8 2 3/8 1 9/16 1 5/8 2 3/4

1 1/2 1 1.910 1.330 2 5/8 11/16 - 1 9/16 1 3/16 2 1 9/16 1 3/8 2 3/8

1 1/2 3/4 1.910 1.065 2 9/16 3/4 - 2 9/16 1 - 2 9/16 1 -

1 1/2 1/2 1.910 .855 2 1/2 13/16 - 2 1/2 1 1/16 - 2 9/16 1 -

1 1/2 3/8 1.910 .690 2 7/16 7/8 - 2 7/16 1 1/8 -

2 1 1/2 2.385 1.915 1 9/16 1 1/4 2 1/2 1 9/16 1 7/8 2 11/16 1 9/16 2 1/16 3

2 1 1/4 2.385 1.675 2 11/16 13/16 - 2 7/8 15/16 - 1 9/16 2 2 3/4

2 1 2.385 1.330 2 5/8 7/8 - 2 13/16 1 - 2 13/16 1 -

2 3/4 2.385 1.065 2 9/16 15/16 - 2 3/4 1 1/16 - 2 3/4 1 1/16 -

2 1/2 2.385 .855 2 1/2 1 - 2 11/16 1 1/8 - 2 11/16 1 1/8 -

NoMiNAlpipe Size C D Ft. Ty A B e Ft. Ty A B e Ft. Ty A B e

ClASS 3000 ClASS 6000 ClASS 9000

Note: Socket Weld Reducer Inserts comply fully with MSS-SP-79

TYpe 1 TYpe 2


17/2213

ThreaDeD Plugs & bushings

* Dimension J for Hex Head Bushing and dimension C for Hex Head Plug are the same.

Class 3000/6000

RuH Plu

HxBush

SqurH Plu

HxPlu

FlushBush

a 1 3/8 1 5/8 1 5/8 1 3/4 1 3/4 2 2 2 2 1/2 2 3/4 2 3/4 3

B 13/32 17/32 11/16 27/32 1 1/16 1 5/16 1 11/16 1 29/32 2 3/8 2 7/8 3 1/2 4 1/2

C * 7/16 5/8 11/16 7/8 1 1/16 1 7/16 1 13/16 2 2 1/2 3 3 3/4 4 5/8

D 1/4 1/4 5/16 5/16 3/8 3/8 9/16 5/8 11/16 3/4 13/16 1 1/4

e 7/16 1/2 9/16 11/16 3/4 27/32 7/8 15/16 1 1 1/4 1 9/16 1 21/32

F 9/32 3/8 7/16 9/16 5/8 1 3/16 15/16 1 1/8 1 5/16 1 1/2 1 11/16 2 1/2

g 1/4 1/4 5/16 3/8 7/16 1/2 9/16 5/8 11/16 3/4 13/16 1 1/4

h 3/8 7/16 1/2 9/16 5/8 3/4 13/16 13/16 7/8 1 1/16 1 1/8 1 3/8J 5/8 11/16 7/8 1 1/16 1 7/16 1 13/16 2 2 1/2 3 3 3/4 4 5/8

k 3/16 3/16 3/16 1/4 1/4 3/8 3/8 3/8 1/2 13/16 1 1/4

l 1/2 9/16 11/16 3/4 27/32 7/8 15/16 1 1 1/4 1 9/16 1 21/32

M 7/16 1/2 9/16 5/8 3/4 13/16 13/16 7/8 1 1/16 1 1/8 1 1/4

n 3/8 7/16 1/2 9/16 5/8 3/4 13/16 13/16 7/8 1 1/16 1 1/8 1 1/4


DiMeNSioNS (ncs)

rounD heaD PugS .125 .125 .188 .250 .375 .750 1.125 1.563 3.00 4.75 7.62 12.87

hexagon PlugS .063 .063 .125 .188 .313 .500 1.125 1.375 2.25 3.87 5.87 13.00

SQuare heaD PlugS .016 .031 .063 .125 .188 .313 .563 .875 1.50 2.25 2.87 7.18

hexagon BuShingS .063 .063 .063 .125 .188 .375 .688 1.62 2.37 3.50 8.31

FlUSH BUSHIngS .063 .063 .063 .125 .125 .125 .188 .37 .62 1.00 2.00

WeighT (unds)


18/2214

Mss-sP-83 uniOns - ThreaDeD & sOCkeT WelD

Class 3000

Class 6000

* C dimension is across octagon corners or a diameter as applicable.

The 2 1/2" and 3" 3000 and 2" 6000 sizes have octagonal male and

female ends; the other sizes are round.

Thr Sckt Wl

B & C dimenSionS aCRoSSoCTagon CoRneRS

B & C dimenSionS aCRoSSoCTagon CoRneRS

NoMiNAl pipe Size 1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3

a 1 11/16 1 11/16 1 27/32 2 2 5/16 2 7/16 2 7/8 3 3 1/2 4 1/4 4 7/16

B 1 31/64 1 31/64 1 11/16 1 15/16 2 3/8 2 25/32 3 23/64 3 23/32 4 27/64 5 15/64 6 5/32

C 53/64 53/64 1 1 3/16 1 15/32 1 25/32 2 7/32 2 35/64 3 1/16 3 9/16 4 9/32

D 25/32 25/32 31/32 1 3/32 1 5/32 1 3/8 1 45/64 1 7/8 2 1/16 2 3/8 2 7/16

(Min.) e 3/8 3/8 3/8 3/8 1/2 1/2 1/2 1/2 5/8 5/8 5/8

F .420 .555 .690 .855 1.065 1.330 1.675 1.915 2.406 2.906 3.535

WeighT per UNioN (unds)

.38 .36 .50 .695 1.175 1.64 2.59 3.41 5.12 8.75 12.625

DiMeNSioNS (ncs)

ClASS

3000

NoMiNAl pipe Size 1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2

a 1 11/16 1 27/32 2 2 5/16 2 7/16 2 7/8 3 3 1/2 4 1/8

B 1 31/64 1 11/16 1 15/16 2 3/8 2 25/32 3 23/64 3 23/32 4 27/64 5 15/64

C 53/64 1 1 3/16 1 15/32 1 25/32 2 7/32 2 35/64 3 1/16 3 9/16

D 25/32 31/32 1 3/32 1 5/32 1 3/8 1 45/64 1 7/8 2 1/16 2 3/8

(Min.) e 3/8 3/8 3/8 3/8 1/2 1/2 1/2 1/2 5/8

F .420 .555 .690 .855 1.065 1.330 1.675 1.915 2.406


.5 .56 .75 1.25 1.75 3 3.75 6.0 10.5

DiMeNSioNS (ncs)

ClASS

6000


19/2215

rOCkWOOD uniOns

TyPe 601

TyPe 602TyPe 602b

TyPe 604

Ball to cone seats for smooth alignment. Can be cracked and rejoined- repeatedly.

Replaceable, interchangeable parts. Carbon Steel, coated to resist corrosion.

Stays sealed, despite shock, vibration,expansion and rough wrenching.

Silicon bronze and stainless steel seatsdouble locked under 120,000 lb. psi.

Conveniently packaged. Suitable for use with Schedule

40/80 pipe.

100% hydro tested.

NoMiNAl pipe Size 1/8 18-NPT 1/4 18-NPT 3/8 18-NPT 1/2 14-NPT 3/4 14-NPT 1 11 1/2-NPT 1 1/4 11 1/2-NPT 1 1/2 11 1/2-NPT 2 11 1/2-NPT

DePth SoCket 7/16 7/16 7/16 1/2 1/2 9/16 9/16 9/16 11/16

SoCket DiaMeter .420 .555 .690 .855 1.065 1.330 1.675 1.915 2.406

STYle NUT hx hx hx hx octan octan octan octan octan


.32 .30 .40 .72 1.10 1.5 2.2 2.6 4.6

DiMeNSioNS (ncs)

TYpe

602B

NoMiNAl pipe Size 1/8 18-NPT 1/4 18-NPT 3/8 18-NPT 1/2 14-NPT 3/4 14-NPT 1 11 1/2-NPT 1 1/4 11 1/2-NPT 1 1/2 11 1/2-NPT 2 11 1/2-NPT

a 1 3/4 1 3/4 2 2 1/4 2 7/16 2 11/16 2 31/32 3 1/8 3 11/16

B 1 1/4 1 1/4 1 7/16 1 21/32 2 2 3/8 2 3/4 3 3 23/32

C 3/4 3/4 7/8 1 3/32 1 25/64 1 5/8 2 2 9/32 2 51/64

D 51/64 51/64 15/16 1 11/64 1 7/16 1 23/32 2 3/32 2 11/32 2 7/8

e .264 .402 .408 .534 .548 .683 .707 .724 .757

F 3/4 3/4 13/16 1 1 1/16 1 3/32 1 19/64 1 21/64 1 15/32

g 1/2 1/2 9/16 11/16 3/4 27/32 7/8 1 1 7/32

h 19/32 19/32 3/4 25/32 29/32 1 1/16 1 5/32 1 7/32 1 7/16

i 21/64 3/8 1/2 5/8 27/32 1 1/16 1 13/32 1 21/32 2 1/16

J 29/32 29/32 1 1/16 1 5/16 1 37/64 1 13/16 2 1/4 2 1/2 3 1/16

k 1/8 1/8 1/8 3/16 7/32 7/32 9/32 9/32 19/64

l 7/8 7/8 15/16 1 1/8 1 3/16 1 5/16 1 7/16 1 1/2 1 25/32

M 1.035 1.035 1.164 1.437 1.693 1.975 2.416 2.649 3.221

STYle NUT hx hx hx hx octan octan octan octan octan


.32 .30 .40 .72 1.10 1.5 2.2 2.6 4.6

DiMeNSioNS (ncs)

TYpe

601,

602,

604

* Preferred over bronze to carbon steel seated unions.


20/2216

lug nuT uniOns

Class 3000

Lug Nut Unions from Bonney Forge are unionswith modified Stub-Acme threads ideal for

applications requiring rapid assembly and/orbreakdown.

Threaded and socket weld ends. Seating characteristics of AAR unions. Twin lugs in sizes up to 3/4" Class 3000

and 1/2 Class 6000. Tri-lug design in sizes from 1"- 4" Class

3000 and 3/4" - 2" Class 6000.

NoMiNAl pipe Size

3/8

1/2

3/4

1

1 1/4

1 1/2

2

2 1/2

3

4

DiMeNSioNS (ncs)A

1.950

2.065

2.375

2.580

2.950

3.115

3.575

4.200

4.475

8.50

Class 6000

ClASS

3000

ClASS

6000

A

2.065

2.375

2.580

2.950

3.115

3.5754.200

-

-

-


21/22

nte: The mteri i this ct is fr eer ifrmti. Fr specific perfrmce dt d prper mteri seecti, csut yur Bey Frerepresettive. athuh every ttempt hs bee mde t esure tht the ifrmti ctied i this ct is crrect, Bey Fre reserves the riht c dss, ms spcfcs w c.

Pd u.S.aCt F9-2012 (500 5/12)

pATeNTS

goVerNiNg lAW

geNerAl TerMS AND CoNDiTioNS oF SAle oF: BoNNeY Forge (hereAFTer reFerreD To AS BF)

WArrANTY

eXClUSioNS

pUrChASerSreMeDieS

priCeS

ACCepTANCeoF orDerS

reMiTTANCeS

TAXeS

ShorTAgeS &DAMAgeS iNTrANSiT

DelAYS

CANCellATioN &SUSpeNSioN

reTUrN oFMATeriAl

No WAiVer

DieS, ToolSAND pATTerNS

ForCeMAJeUre

pUrChASerSACCepTANCeoF ABoVeCoNDiTioNS

pArTiAl Ship-MeNTS ANDpAYMeNTS

All products are warranted to be free from manufacturing defects for a period of one (1) year from date of shipment, and any found to be defective within thatperiod will be replaced without charge, provided (1) that the product was used as recommended and in accordance with approved installation and operatingpractices, (2) that its failure resulted from a manufacturing defect and not from damage due to corrosive, abrasive, or other wear normally to be expected in theservices involved, (3) that the product was not modified or changed (unless written approval was given by BF), and (4) that written notice of such defect isdeliveredtoBFduringsuchone(1)yearperiod.Nolaborcostsorotherexpenseorliabilityisassumed.TheUniformCommercialCodeshallnotapplytothesale,nor the Michigan statutes adopting the Uniform Commercial Code. This express warranty is in lieu of and excludes all other warranties, guarantees, orrepresentations,expressedorimplied.THEREARENOIMPLIEDWARRANTIESOFMERCHANTABILITYOROFFITNESSFORAPARTICULARPURPOSE.

DonotuseBFproductsinaircraftoraerospaceapplications.Nowarranties,guaranteesorrepresentationsofanykindaremadewithrespecttosuchapplications. Purchaser assumes all risks of any use in such applications and will indemnify and hold harmless BF against and from any claims, costs (includingattorneys fees) and liabilities arising out of such use.

The Purchasers remedies with respect to any product furnished by BF hereunder that is found not to be in conformity with the terms and conditions of thecontract because of breach of contract, breach of express or implied warranty, or negligence shall be limited exclusively to the right of replacement of suchdefective product or, at our option, repayment of our sale price of the product. In no event shall BF be liable for claims (based upon breach of contract,breach of express or implied warranty, or negligence) for any other damages, whether direct, immediate, foreseeable, consequential, or special or for anyexpenses incurred by reason of the use or misuse, sale or fabrication of products which do or do not conform to the terms and conditions of the contract.

Prices, and other terms of sale and payment, are subject to change without notice. Unless a contrary provision appears in this price schedule, quotation ororder acknowledgment, prices may be withdrawn without notice at any time. Stenographic or clerical errors are subject to correction.

AllordersaresubjecttoBFcreditdepartmentapprovalpriortoacceptancebyBF.NoassignmentofthePurchasersrightsmaybemadewithoutthewritten consent of BF.

All accounts are payable in United States funds, free of exchange, collection, or any other charges. If, in the sole discretion of BF, the financial condition of thePurchaser at any time so requires, BF retains the right to require full or partial payment in advance.

BF reserves the right to make partial shipments from time to time, and to render invoices therefore, which shall be due and payable as provided in saidinvoicesandtheparagraphentitledRemittances.IfthePurchaserbecomesoverdueinanysuchpartialpayment,BFshallbeentitledtosuspendworkand/or avail itself of other legal remedies.

Unless otherwise specifically noted, the amount of any sale, use, occupancy, excise tax, or other tax, of any nature, federal, state, or local for which BF islegally liable, either initially or through failure of payment by Purchaser, shall be added or be in addition to the price quoted and Purchaser agrees to pay thesame to BF.

Claims for shortages must be made in writing within ten days after receipt of shipment, but loss of or damage to material in transit is the responsibilityof the carrier.

All promises of shipment are estimated as closely as possible, and we will use our best efforts to ship within the time promised but do not guaranteeto do so, and assume no liability for not doing so. Materials stated to be in stock are subject to prior sale.

The order or contract is subject to cancellation or instructions to suspend or delay work or delivery only upon receipt of written notification and withour consent, and upon agreement to pay BFs adjustment charge. Orders for special products (usually price on application items) may be changedand/orcancelledonlyuponreceiptofwritteninstructionswithanexpressedagreementtomakepaymentformaterialusedandworkalreadyperformed.

Noproductofourmanufacturemaybereturnedwithoutwrittenconsent.Allgoodsreturnedaresubjecttoahandlingchargeplusfreightinboth

directions and charges for any required reconditioning, unless otherwise specified in writing by BF.

Purchaser will indemnify and hold harmless BF against and from any claims, costs (including attorneys fees) and liabilities arising out of any suitalleginginfringementofanypatents,byanyproductsuppliedbyBFunderthecontractandmadeinaccordancewiththedesignand/orspecificationfurnished by the Purchaser to BF.

The contract shall be governed by, construed, and enforced in accordance with the laws of the Commonwealth of Pennsylvania, without regard toconflict of law principles.

The failure of BF to insist, in any one or more instances upon the performance of any of the terms, covenants, or conditions of the contract or toexercise any right thereunder shall not be construed as a waiver or relinquishment of the future performance of any such term, covenant, or conditionor the future exercise of such rights, nor shall it be deemed to be a waiver or relinquishment of any other term, covenant, or condition or the exerciseof any other rights under the contract.

Dies, tools and patterns required to produce the article quoted on shall remain the property of BF. Preparation charges for dies, tools and patternsrepresent only a portion of cost. Payment of such charge does not give you any right, title, or interest in such dies, tools, or other products ofpreparation. We will not be responsible for retention of dies or patterns on which no orders are received for two years or more.

Any delays in or failure of performance of BF shall not constitute default or give rise to any claims or damages if and to the extent that such delay or

failure is caused by occurrences beyond the control of BF, including but not limited to acts of God or the public enemy, expropriation or confiscation offacilities, compliance with any order or request of any governmental authority, acts of war, rebellion or sabotage or damage resulting therefrom,embargoes or other export restrictions, fires, floods, explosions, accidents, breakdowns, riots or strikes or other conceived acts of workmen, whetherdirect or indirect, or any other causes whether or not of the same class or kind as those specifically above named which are not within the control ofBF and which by the exercise of reasonable diligence, BF is unable to prevent or provide against.

The contract shall be subject to the terms and conditions contained or referred to in BFs price schedule, quotation or order acknowledgment and tonootherswhatsoever.Nowaiver,alteration,ormodificationofthetermsandconditionsinthispriceschedule,quotationororderacknowledgmentshall be binding unless in writing and signed by an authorized representative of BF.


22/22

Bonney forge cataloge

Documents

Transcript of Bonney forge cataloge