Bombas Goulds Pump
-
Upload
pamelataboadalozano -
Category
Documents
-
view
304 -
download
7
description
Transcript of Bombas Goulds Pump
-
ITTGoulds Pumps3656/3756 S-GroupCast Iron, Bronze Fitted Centrifugal PumpsBombas centrfugas en hierro fundido con accesorios de bronce
Goulds Pumps is a brand of ITT Corporation.
Goulds Pumps es una marca de fbrica de ITT Corporation.
www.goulds.com
Engineered for life
Commercial Water
B363756S
-
2GOULDS PUMPSCommercial Water
A Full Range of Product Features
The 3656 and 3756 S-Group pumps from Goulds have been designed with technical benefits to meet the needs of users in a variety of water supply, recircula-tion, and cooling applications.
The model 3656 offers close coupled design for space saving and simplified maintenance.
The model 3756 offers a bear-ing frame mounted design for flexibility of installation and drive arrangements.
Back pull-out to reduce mainte-nance down time.
Standard Type 21 mechanical seal for both reliability and availability. Carbon/ceramic/BUNA standard, with other faces and elastomers available.
3656/3756 available in all iron, bronze fitted or all bronze construction for application versatility.
Replaceable wearing compo-nents include stainless steel shaft sleeve and casing and hub wear rings to maintain peak efficiency.
Packed box sealing is also avail-able as an option.
Enclosed impeller design, dy-namic balancing and renewable wear rings reduce losses affect-ing performance and pump life.
Suction and discharge pipe connections are NPT threaded, except 3 x 4 7 which has
125 lb. ANSI flat faced flanges.
Rigid cast iron motor adapter provides support and registered fits maintain positive unit alignment.
Standard NEMA motor frame, JM or JP shaft extension, C-face mounting, single phase or three phase, 3500 or 1750 RPM. Open drip proof and totally enclosed fan cooled.
Optional explosion proof or high efficiency motors available.
Optional rigid carbon steel bedplate, sheet metal coupling guard and T. B. Woods spacer coupling for 3756 models.
Las bombas 3656 y 3756 del Grupo S de Goulds han sido diseadas con beneficios tcnicos para satisfacer las necesidades de los usuarios en variadas aplicaciones de suministro y recirculacin de agua y aplicaciones de refrigeracin.
El modelo 3656 cuenta con diseo de acoplamiento corto para ahorrar espacio y simplificar el mantenimiento.
El modelo 3756 cuenta con diseo de montaje sobre bastidor que ofrece gran flexibilidad en los arreglos de instalacin y accionamiento.
Desmontaje posterior que reduce el tiempo de inactividad por mantenimiento.
Sello mecnico estndar Tipo 21, brinda gran confiabilidad y asegura la disponibilidad. Estndar de carbono/cermica/ BUNA, tambin se encuentran disponibles con otras caras y elastmeros.
Los modelos 3656 y 3756 se fabrican en todo hierro, con accesorios de bronce o en todo bronce, para una mayor versatilidad de aplicacin.
Los componentes de desgaste reemplazables incluyen los anillos de desgaste de la carcasa y del rodete y la camisa del eje, de acero inoxidable, para mantener la eficiencia pico.
El diseo de impulsor encerrado, balanceo dinmico y anillos de desgaste reemplazables reducen las prdidas que afectan el desempeo y la vida de la bomba.
Las conexiones de succin y descarga son roscadas NPT, con excepcin de la bomba de 3 x 4 7, que cuenta con bridas de cara lisa ANSI de 125 lbs.
El adaptador rgido del motor, de hierro fundido, ofrece soporte y los montajes registrados mantienen el alineamiento positivo de la unidad.
Motor con bastidor NEMA estndar, extensin de eje JM, montaje en cara C, monofsico o trifsico, 3500 1750 RPM. Abierto a prueba de filtraciones o totalmente encerrado enfriado por ventilador.
Motores a prueba de explosiones y de alta eficiencia disponibles como opcin.
Placa de asiento rgida de acero al carbono, protector de acoplamiento de chapa metlica y acoplamiento espaciador T. B. Woods disponibles como opcin en los modelos 3756.
Una amplia gama de variadas caractersticas
Goulds Pumps is ISO 9001 Registered.
-
3GOULDS PUMPSCommercial Water
Performance Coverage Curvas de desempeo
60
0
120
180
240
METERSMETROS
0
20
40
60
80
m3hrU.S. GPM
GALLONS PER MINUTE (GALONES POR MINUTO)
0 10020 6040 80
8003000 100 600400 700200 500
120 140 160 180
TOTAL DY
NAMIC HEA
D (CAR
GA DINM
ICA TO
TAL)
FEETPIES
11/2 x 2 8
300
1 x 2 8
1 x 2 7 21/2 x 3 7
3 x 4 7
11/2 x 2 611/2 x 2 6H
3500 Coverage Curve, Curva de alcance 3500
1750 Coverage Curve, Curva de alcance 1750
0
40
60
80
METERSMETROS
0
10
30
20
m3hrU.S. GPM
GALLONS PER MINUTE (GALONES POR MINUTO)
0 5010 3020 40
4001500 50 300200 350100 250
60 70 80 90
450
100
20
FEETPIES
TOTAL DY
NAMIC HEA
D (CAR
GA DINM
ICA TO
TAL)
11/2 x 2 8
1 x 2 8
1 x 2 7
3 x 4 721/2 x 3 7
11/2 x 2 6 / 11/2 x 2 6H
-
4GOULDS PUMPSCommercial Water
3656/3756 S-Group Numbering System For All Units Built After June 1, 1998Sistema de numeracin del Grupo S, modelos 3656/3756, para todas las unidades fabricadas luego del 1 de junio de 1998
The various versions of the 3656 and 3756 S-Group are identified by a prod-uct code number on the pump label. This number is also the catalog number for the pump. The meaning of each digit in the product code number is shown below. Not all combinations of motor, impeller and seal options are available for every pump model. Please check with Goulds on non-cataloged numbers.Not recommended for operation beyond printed H-Q curve. For critical applica-tion conditions consult factory.
Las diferentes versiones de los modelos 3656 y 3756 del Grupo S se identifican con un nmero de cdigo de producto en la etiqueta de la bomba. Este nme-ro es tambin el nmero de catlogo de la bomba. A continuacin se ilustra el significado de cada dgito en el cdigo del producto.No todas las combinaciones de motor, impulsor y sellos estn disponibles para cada modelo. Consulte a Goulds sobre nmeros que no aparecen en el catlogo.No se recomienda la operacin ms all de la curva impresa de H-Q (carga-capacidad). Para aplicaciones bajo condiciones crticas, consulte con la fbrica.
22BF 9BF 3BF 5BF 4BF 6BF 1 x 2 7 1 x 2 8 1 x 2 6 1 x 2 6H 1 x 2 8 2 x 3 7 3 x 4 7 Dia. Dia. Dia. Dia. Dia. Dia. Dia. A 6" 8116" 51516" 51516" 8116" 7116" 7116" B 6716 758 558 558 7
58 678 638 C 6 7516 518 6 6
916 5 D 5 7 4 5 6 41116 E 5 6 7 51116 5
18 F 5116 6316 7 5716 6 G 41316 538 6 5316 H 4916 5
18 618 4 J 438 4 K 4116 4116
L 31316
Driver, Elemento motor1 = 1 PH, fase, ODP 4 = 1PH, fase, TEFC 7 = 3 PH, fases, XP 0 = 1 PH, fase, XP2 = 3 PH, fases, ODP 5 = 3 PH, TEFC 8 = 575 V, XP3 = 575 V, ODP 6 = 575 V, TEFC 9 = 3 PH, fases, TEFC, PREFF1 PH, fase = Monofsico; 3 PH, fases = Trifsico
HP Rating, Potencia nominal, HPC = HP F = 1 HP J = 5 HP M = 15 HPD = HP G = 2 HP K = 7 HP N = 20 HPE = 1 HP H = 3 HP L = 10 HP
Driver: Hertz/Pole/RPM, Elemento motor: Hertz/Polos/RPM1 = 60 Hz, 2 pole, 3500 RPM 4 = 50 Hz, 2 pole, 2900 RPM2 = 60 Hz, 4 pole, 1750 RPM 5 = 50 Hz, 4 pole, 1450 RPM3 = 60 Hz, 6 pole, 1150 RPM
Material, Material BF = Bronze fitted, Accesorios de bronce AI = All iron, Todo hierro AB = All bronze, Todo bronce
Pump Size, Tamao de bomba3 = 1 x 2 6(H) 5 = 1 x 2 8 9 = 1 x 2 8 4 = 2 x 3 7 6 = 3 x 4 7 22 = 1 x 2 7
Example Product Code, Ejemplo del cdigo de producto
9 BF 1 H 2 G 0
Mechanical Seal and O-ring, Sello mecnico y anillo en O
Impeller Option Code, Cdigo de opcin de impulsor
H
High Head Impeller (1 x 2 6H Only), Impulsor de carga alta (1 x 2 6H nicamente)
The 1 x 2 8 and 1 x 2 7 are only available in Bronze Fitted. Los tamaos 1 x 2 8 y 1 x 2 7 estn disponibles con accesorios de bronce nicamente.
For frame mounted version, substitute the letters FRM in these positions.
Para las versiones de montaje en bastidor, reempla-zar las letras en esta ubicacin con FRM.
Impeller Code,Cdigo del impulsor
0 Carbon,
Ceramic, Cermica BUNA-N 10K13 1
Carbn Sil-Carbide, EPR 10K19
3 Carburo de Viton 10K27 5 Sil-Carbide silicona 10K64 9 Packed Box Design with BUNA O-Ring, Diseo de prensaestopas empacado con anillo en O de BUNA 15K16
Note: 10K27 replaces obsolete 10K25, Nota: La 10K27 reemplace la obsoleta 10K25.
Seal Code,Cdigodel Sello
Stationary,Estacionario
Type 21 Mechanical Seal, Tipo 21 sello mecnico
Elastomers,Elastmeros
316 SS,316 Acero inoxidable
Metal Parts,Partes Metlicas
Rotary,Rotativo
Part No.,Pieza
Nmero
-
5GOULDS PUMPSCommercial Water
Performance Curves 60 Hz, 3500 RPM Curvas de desempeo 60 Hz, 3500 RPM
These curves show the performance of the 3656 and 3756 at 3500 RPM and 1750 RPM, 60 Hz, and at 2900 RPM and 1450 RPM, 50 Hz. Standard impeller trims are shown.
Estas curvas ilustran el desempeo de los modelos 3656 y 3756 operando a 3500 RPM y 1750 RPM en 60 Hz, y a 2900 RPM y 1450 RPM en 50 Hz. Se muestran los dimetros de impulsor estndar.
Optional ImpellerImpulsor optativo
Ordering Code Dia. Cdigo de pedido Di.
A 6" B 6
716
C 6
D 5 E 5 F 5
116
G 41316
H 4916
J 438
K 4116 L 31316
NOTE:Pumpwillpassasphereto316"diameter.NOTA: La bomba dejar pasar una esfera de hasta 316 de pulgada de dimetro.
Model 3656/3756 S-Group 3500 RPM22 BF / Size (Tama o) 1 x 2 7Imp. Dwg. CN0724R00
NOTE: Not recommended for operationbeyond printed H-Q curve.NOTA: No se recomienda la operaci n m s allde la curva impresa de H-Q (carga-capacidad).
D 53/4
A 63/4 DIA.
B 67/16
C 6
E 51/2
F 51/16
G 413/16
H 49/16J 43/8K 41/16L 313/16
58%
NPSH FEET (PIES)40% EFF 46% 50% 56%
50%
8
10
5 HP
20
3 HP
2 HP
1 HP1.5 HP
54%
54%
46%
0
20
80
100
60
40
0
0
800
m3 hr
U.S. GPM
25
6040
5 15
20 100
120
140
120
10 20
160
180
10
20
30
40
5060%
58%
METERSMETROS
FEETPIES
TOTAL DY
NAMIC HEA
D (CAR
GA DIN
MICA TO
TAL)
CAPACITY (CAPACIDAD)
60%
56%
6
Model 3656/3756 S-Group 3500 RPM9 BF / Size (Tama o) 1 x 2 8 ODP & TEFCImp. Dwg. CN0721R00
NOTE: Not recommended for operationbeyond printed H-Q curve.NOTA: No se recomienda la operaci n m s allde la curva impresa de H-Q (carga-capacidad).
0
50
0
90
0
10060200
m3 hr
U.S. GPM
25
10 40 80 110
300
200
25080
70
7030 50 90
205 15
150
100
60
50
40
30
20
10
METERSMETROS
FEETPIES
TOTA
L DY
NAMIC HEA
D (CAR
GA DIN
MICA TO
TAL)
CAPACITY (CAPACIDAD)10
NPSHR-FT (PIES) 43035 40
45
50% EFF
10
6
10 HP
7.5 HP
5 HP
3 HP
A 81/16 DIA.
C 75/16
E 61/2
G 53/8
D 7
F 63/16
H 51/8
B 75/8
50
Optional ImpellerImpulsor optativo
Ordering Code Dia. Cdigo de pedido Di.
A 8116" B 758" C 7
516 D 7 E 6 F 6316 G 538 H 518
NOTE:Pumpwillpassasphereto316"diameter.NOTA: La bomba dejar pasar una esfera de hasta 316 de pulgada de dimetro.
-
6GOULDS PUMPSCommercial Water
Performance Curves 60 Hz, 3500 RPM Curvas de desempeo 60 Hz, 3500 RPM
D 434"
A 51516" DIA.
C 518"
B 558"
% EFF
NPSHR FEET (PIES)
Model 3656/3756 S-Group 3500 RPM3AI, BF, AB / Size (Tamao) 112 x 2 6 ODP & TEFCImp. Dwg. 114-04
50
5 HP
3 HP
40
60 65
70
70
72
7273
65
60
50
5.5'
10' 12'
14'16'
18'
20'
NOTE: Not recommended for operation beyondprinted H-Q curve.NOTA: No se recomienda la operacin ms all de la curvaimpresa de H-Q (carga-capacidad).
0
40
80
120
160
0
10
20
30
40
50
0
18016012080400
10 20 m3 hr
U.S. GPM
30 40
20 60 100 140
METERSMETROS
FEETPIES
TOTA
L DY
NAMIC HEA
D (CAR
GA DINM
ICA TO
TAL)
CAPACITY (CAPACIDAD)
6'8'7'
Optional ImpellerImpulsor optativo
Ordering Code Dia. Cdigo de pedido Di.
A 51516"
B 558"
C 518 D 4
NOTE: Pump will pass a sphere to 516" diameter.
NOTA: La bomba dejar pasar una esfera de hasta 516 de pulgada de dimetro.
Optional ImpellerImpulsor optativo
Ordering Code Dia. Cdigo de pedido Di.
A 51516"
B 558
NOTE: Pump will pass a sphere to 316" diameter.
NOTA: La bomba dejar pasar una esfera de hasta 316 de pulgada de dimetro.
A 51516" DIA.
B 558"
NPSHR FEET (PIES)
0
40
80
120
160
0
10
20
30
40
50
0
12080400
10 20 m3 hr
U.S. GPM
30
20 60 100 160140
METERSMETROS
FEETPIES
TOTA
L DY
NAMIC HEA
D (CAR
GA DINM
ICA TO
TAL)
CAPACITY (CAPACIDAD)
% EFF
Model 3656/3756 S-Group 3500 RPM3AI, BF, AB / Size (Tamao) 112 x 2 6H ODP & TEFCImp. Dwg. 114-18 H = High Head Impeller H = Impulsor de carga alta
3 HP
40
5.5'
8'
10'
12'
14'16'
18'
40
50
50
60
60
65
65
67
67
6'
7'
NOTE: Not recommended for operation beyondprinted H-Q curve.May utilize 1.15 motor service factor.
NOTA: No se recomienda la operacin ms all de lacurva impresa de H-Q (carga-capacidad).Puede utilizar factor de servicio 1.15.
-
7GOULDS PUMPSCommercial Water
Performance Curves 60 Hz, 3500 RPM Curvas de desempeo 60 Hz, 3500 RPM
B 758"
C 634"
H 618"
E 734"
15 HP
% EFF
Model 3656/3756 S-Group 3450 RPM5AI, BF, AB / Size (Tamao) 112 x 2 8 ODP & TEFCImp. Dwg. 118-88
A 8116" DIA.
7 12 HP 10 HP
10'
5 HP
20 HP
504060
60
65
65
68
8'12' 14'
16'
18'
20'F 7"
G 614"
D 534"
NPSHR FEET (PIES)
NOTE: Not recommended for operation beyondprinted H-Q curve.NOTA: No se recomienda la operacin ms all de lacurva impresa de H-Q (carga-capacidad).
0
50
100
300
0
20
60
80
0
250150500
10 20 m3 hr
U.S. GPM
60
100 200
30 40 50
250
200
150
40
METERSMETROS
FEETPIES
TOTA
L DY
NAMIC HEA
D (CAR
GA DINM
ICA TO
TAL)
CAPACITY (CAPACIDAD)
Optional ImpellerImpulsor optativo
Ordering Code Dia. Cdigo de pedido Di.
A 8116" E 7" B 7
58 F 7 C 6 G 6 H 618 D 5
NOTE:Pumpwillpassasphereto516"diameter.NOTA: La bomba dejar pasar una esfera de hasta 516 de pulgada de dimetro.
00
70
0
250 3000
m3 hr
U.S. GPM350
40
10
20
100
50
200
80
250
200
150
60
50
40
30
20
100
METERSMETROS
FEETPIES
TOTA
L DY
NAMIC HEA
D (CAR
GA DINM
ICA TO
TAL)
CAPACITY (CAPACIDAD)
15050
10 30 6050 70
Model 3656/3756 S-Group 3500 RPM4AI, BF, AB / Size (Tamao) 212 x 3 7 ODP & TEFCImp. Dwg. 279-81
NOTE: Not recommended for operation beyondprinted H-Q curve.NOTA: No se recomienda la operacin ms all de lacurva impresa de H-Q (carga-capacidad).
6' NPSHR FEET (PIES)8' 10'
D 6''
H 43/4''
% EFF
10 HP
7.5 HP5 HP
15 HP
60
68
64
70
70
12' 14'
16' 18'
A 71/16'' DIA.B 67/8''
F 57/16''
K 41/16''
C 69/16''
E 511/16''
J 41/2''
G 53/16''
7171
64
68
Optional ImpellerImpulsor optativo
Ordering Code Dia. Cdigo de pedido Di.
A 7116" B 6
78 C 6
916 D 6 E 5
1116 F 5
716 G 5
316 H 4 J 4 K 4116
NOTE:Pumpwillpassasphereto716"diameter.NOTA: La bomba dejar pasar una esfera de hasta 716 de pulgada de dimetro.
-
8GOULDS PUMPSCommercial Water
Performance Curves 60 Hz, 3500 RPMCurvas de desempeo 60 Hz, 3500 RPM
% EFF
Model 3656/3756 S-Group 3500 RPM6AI, BF / Size 3 x 4-7Imp. Dwg. 114-05
B 638" DIA.
7 12 HP
E 518"
C 512"
10 HP
6'
50
D 41116"
15 HP
50
60
60 65
65
68
68 70
70
8'
10'12'
16'
74
NPSHR FEET (PIES)
NOTE: Not recommended for operation beyondprinted H-Q curve.May utilize 1.15 motor service factor.
NOTA: No se recomienda la operacin ms all de lacurva impresa de H-Q (carga-capacidad).Puede utilizar factor de servicio 1.15.
0
25
75
175
0
20
40
0
6000
10 20 m3 hr
U.S. GPM
150
100 200
30 40 50
150
125
10030
500400300
1007060
10
50
60
1401301201109080
50
200
METERSMETROS
FEETPIES
TOTA
L DY
NAMIC HEA
D (CAR
GA DINM
ICA TO
TAL)
CAPACITY (CAPACIDAD)
Optional ImpellerImpulsor optativo
Ordering Code Dia. Cdigo de pedido Di.
B 638"
C 5 D 41116 E 518 F 6
NOTE:Pumpwillpassasphereto"diameter.NOTA: La bomba dejar pasar una esfera de hasta de pulgada de dimetro.
Optional ImpellerImpulsor optativo
Ordering Code Dia. Cdigo de pedido Di.
A 6" B 6
716
C 6
D 5 E 5 F 5
116
G 41316
H 4916
J 438
K 4116 L 31316
NOTE:Pumpwillpassasphereto316"diameter.NOTA: La bomba dejar pasar una esfera de hasta 316 de pulgada de dimetro.
Model 3656/3756 S-Group 1750 RPM22 BF / Size (Tama o) 1 x 2 7Imp. Dwg. 277-75
NOTE: Not recommended for operation beyondprinted H-Q curve.NOTA: No se recomienda la operaci n m s all de lacurva impresa de H-Q (carga-capacidad).
0
10
40
50
30
20
0
60200U.S. GPM
15
10 40 7030 50
5 10
0
15
10
5
METERSMETROS
FEETPIES
TOTA
L DY
NAMIC HEA
D (CAR
GA DIN
MICA TO
TAL)
CAPACITY (CAPACIDAD)m3 hr
30% EFF40%
47%52%
2 NPSH55%
.5 HP
.75 HP
47%
455%18
52%
A 63/4 DIA.
B 67/16
C 6
D 53/4
E 51/2
F 51/16
G 413/16
H 49/16J 43/8
K 41/16L 313/16
Performance Curves 60 Hz, 1750 RPMCurvas de desempeo 60 Hz, 1750 RPM
-
9GOULDS PUMPSCommercial Water
Performance Curves 60 Hz, 1750 RPMCurvas de desempeo 60 Hz, 1750 RPM
0
10
0
20
0
75706040200
6 10 m3 hr
U.S. GPM
14 16
10 30 50 65
20
40
30
70
5
50
60
15
10
45255 15 35 55
12842
METERSMETROS
FEETPIES
TOTAL DY
NAMIC HEA
D (CAR
GA DINM
ICA TO
TAL)
CAPACITY (CAPACIDAD)
25 30 3540
45
% EFF
4'
45
1 12 HP
1 HP
34 HP
12 HP
20
A 81/16'' DIA.
C 75/16
E 61/2
F 63/16
G 53/8H 51/8
Model 3656/3756 S-Group 1750 RPM9BF / Size (Tamao) 1 x 2 8Imp. Dwg. 120-67
NOTE: Not recommended for operation beyondprinted H-Q curve.NOTA: No se recomienda la operacin ms all de lacurva impresa de H-Q (carga-capacidad).
NPSHR FEET (PIES) 3
Model 3656/3756 S-Group 1750 RPM3AI, BF, AB / Size (Tamao) 112 x 2 6Imp. Dwg. 114-04
3'
34 HP
12 HP
4'
5'
9'
50
60
65
68
NOTE: Not recommended for operation beyondprinted H-Q curve.NOTA: No se recomienda la operacin ms all de lacurva impresa de H-Q (carga-capacidad).
68
5
10
15
2
10
0
90806040200
5 10 m3 hr
U.S. GPM
15 20
10 30 50 70
20
25
30
35
4
6
8
METERSMETROS
FEETPIES
TOTA
L DY
NAMIC HEA
D (CAR
GA DINM
ICA TO
TAL)
CAPACITY (CAPACIDAD)
% EFF 50
A 51516" DIA.
B 558"
C 518"
D 434"
NPSHR FEET (PIES)
6065
Optional ImpellerImpulsor optativo
Ordering Code Dia. Cdigo de pedido Di.
A 8116" C 7
516 E 6
F 6316
G 538
H 518
NOTE:Pumpwillpassasphereto316"diameter.NOTA: La bomba dejar pasar una esfera de hasta 316 de pulgada de dimetro.
Optional ImpellerImpulsor optativo
Ordering Code Dia. Cdigo de pedido Di.
A 51516" B 5
58 C 518 D 4
NOTE:Pumpwillpassasphereto516"diameter.NOTA: La bomba dejar pasar una esfera de hasta 516 de pulgada de dimetro.
-
10GOULDS PUMPSCommercial Water
Performance Curves 60 Hz, 1750 RPMCurvas de desempeo 60 Hz, 1750 RPM
A 51516" DIA.
B 558"
% EFF
Model 3656/3756 S-Group 1750 RPM3AI, BF, AB / Size (Tamao) 112 x 2 6HImp. Dwg. 114-18 H = High Head Impeller H = Impulsor de carga alta
403'
12 HP
50
50
55
5560
60
66
664'
5'
6'
7'
NOTE: Not recommended for operation beyondprinted H-Q curve.NOTA: No se recomienda la operacin ms all de lacurva impresa de H-Q (carga-capacidad).
NPSHR FEET (PIES)
5
10
15
2
10
0
806040200
5 10 m3 hr
U.S. GPM
15 20
10 30 50 70
20
25
30
35
4
6
8
9
7
5
3
METERSMETROS
FEETPIES
TOTA
L DY
NAMIC HEA
D (CAR
GA DINM
ICA TO
TAL)
CAPACITY (CAPACIDAD)
A 8116" DIA.
B 758"
C 634"
D 534"
% EFF NPSHR FEET (PIES)
Model 3656/3756 S-Group 1725 RPM5AI, BF, AB / Size (Tamao) 112 x 2 8Imp. Dwg. 118-88
50
3'
1 HP
2 HP
3 HP
1 12 HP
6066
5'
7'
NOTE: Not recommended for operation beyondprinted H-Q curve.NOTA: No se recomienda la operacin ms all de lacurva impresa de H-Q (carga-capacidad).
64
66
6460
20
30
5
20
0
16012080400
10 20 m3 hr
U.S. GPM
30 40
20 60 100 140
40
50
60
0
15
10
METERSMETROS
FEETPIES
TOTA
L DY
NAMIC HEA
D (CAR
GA DINM
ICA TO
TAL)
CAPACITY (CAPACIDAD)
10
0
Optional ImpellerImpulsor optativo
Ordering Code Dia. Cdigo de pedido Di.
A 8116" B 7
58 C 6 D 5
NOTE:Pumpwillpassasphereto516"diameter.NOTA: La bomba dejar pasar una esfera de hasta 516 de pulgada de dimetro.
Optional ImpellerImpulsor optativo
Ordering Code Dia. Cdigo de pedido Di.
A 51516" B 558
NOTE:Pumpwillpassasphereto316"diameter.
NOTA: La bomba dejar pasar una esfera de hasta 316 de pulgada de dimetro.
-
11GOULDS PUMPSCommercial Water
Performance Curves 60 Hz, 1750 RPMCurvas de desempeo 60 Hz, 1750 RPM
Model 3656/3756 S-Group 1750 RPM4AI, BF, AB / Size (Tamao) 212 x 3 7Imp. Dwg. CN0710R00
NOTE: Not recommended for operation beyondprinted H-Q curve.NOTA: No se recomienda la operacin ms all de lacurva impresa de H-Q (carga-capacidad).
00
15
0
140 160800
m3 hr
U.S. GPM40 180
60
3020
10
10
50
40
30
20
10
5
120
40
METERSMETROS
FEETPIES
TOTA
L DY
NAMIC HEA
D (CAR
GA DINM
ICA TO
TAL)
CAPACITY (CAPACIDAD)
6020 100
5 15 25 35
% EFF
5'
1 12 HP
34 HP12 HP
60
66
64
6'
2 HP
1 HP
A 71/16'' DIA.
C 69/16
NPSHR FEET (PIES) 3
B 67/8
E 511/16
F 57/16
G 53/16
J 41/2
H 43/4
K 41/16
D 6
4'64 66
68
68 70
70
A 7116" DIA.
B 638"
C 512"
NPSHR FEET (PIES)
% EFF
Model 3656/3756 S-Group 1750 RPM6AI, BF, AB / Size (Tamao) 3 x 4 7Imp. Dwg. 114-05
355'
1 12 HP 1 HP
2 HP
3 HP
48
48
60
60
65
65
67
67
4'
8'
16'
F 6"
NOTE: Not recommended for operation beyondprinted H-Q curve.NOTA: No se recomienda la operacin ms all de lacurva impresa de H-Q (carga-capacidad).
D 41116"
10
20
0
15
0
3002001000
10 20 m3 hr
U.S. GPM
40 90
50 150 250 350
30
40
50
0
10
5
30 50 60 70 80
METERSMETROS
FEETPIES
TOTA
L DY
NAMIC HEA
D (CAR
GA DINM
ICA TO
TAL)
CAPACITY (CAPACIDAD)
Optional ImpellerImpulsor optativo
Ordering Code Dia. Cdigo de pedido Di.
A 7116" B 6
78
C 6916
D 6 E 5
1116 F 5
716
G 5316
H 4
J 4 K 4116
NOTE:Pumpwillpassasphereto716"diameter.NOTA: La bomba dejar pasar una esfera de hasta 716 de pulgada de dimetro.
Optional ImpellerImpulsor optativo
Ordering Code Dia. Cdigo de pedido Di.
A 7116" B 6
38 C 5 D 41116 F 6
NOTE:Pumpwillpassasphereto"diameter.NOTA: La bomba dejar pasar una esfera de hasta de pulgada de dimetro.
-
12GOULDS PUMPSCommercial Water
Performance Curves 50 Hz, 2900 RPMCurvas de desempeo 50 Hz, 2900 RPM
Optional ImpellerImpulsor optativo
Ordering Code Dia. Cdigo de pedido Di.
A 8116" B 7
58 C 7516 D 7 E 6 F 6316 G 538 H 518
NOTE:Pumpwillpassasphereto516"diameter.NOTA: La bomba dejar pasar una esfera de hasta 516 de pulgada de dimetro.
Optional ImpellerImpulsor optativo
Ordering Code Dia. Cdigo de pedido Di.
A 6" B 6716 C 6 D 5 E 5 F 5116 G 41316 H 4916 J 438 K 4116 L 31316
NOTE:Pumpwillpassasphereto316"diameter.
NOTA: La bomba dejar pasar una esfera de hasta 316 de pulgada de dimetro.
A 63/4 DIA.
B 67/16
C 6
E 51/2
F 51/16
K 41/16
L 313/16
J 43/8
H 49/16
G 413/16
D 53/4
Model 3656/3756 S-Group 2900 RPM22 BF / Size (Tama o) 1 x 2 7Imp. Dwg. 277-75
3.0 HP
2.0 HP
1.5 HP
1.0 HP
.75 HP
4
51%
48%
NOTE: Not recommended for operation beyondprinted H-Q curve.NOTA: No se recomienda la operaci n m s all de lacurva impresa de H-Q (carga-capacidad).
0
20
100
0
0
80300
m3 hr
U.S. GPM
25
10 60 9040 70
5 15
20 50 100 110
10 20
10
20
3057%
57%
55%
40
60
80
120
4
METERSMETROS
FEETPIES
TOTA
L DY
NAMIC HEA
D (CAR
GA DIN
MICA TO
TAL)
CAPACITY (CAPACIDAD)
55%
35%EFF 43% 48%51%
6
13
3NPSHR FEET (PIES)
Model 3656/3756 S-Group 2900 RPM9 BF / Size (Tama o) 1 x 2 8Imp. Dwg. 120-67
NOTE: Not recommended for operation beyondprinted H-Q curve.NOTA: No se recomienda la operaci n m s all de lacurva impresa de H-Q (carga-capacidad).
0
50
0
0
10060200
m3 hr
U.S. GPM
25
10 40 80 110
200
70
7030 50 90
205 10
150
100
60
50
40
30
20
10
15
METERSMETROS
FEETPIES
TOTA
L DY
NAMIC HEA
D (CAR
GA DIN
MICA TO
TAL)
CAPACITY (CAPACIDAD)
E 61/2
G 53/8
20 25 31 3742
47
47 % EFF
8
4
3 HP
2 HP
A 81/16 DIA.
B 75/8
C 75/16
D 7
F 63/16
H 51/8
1.5 HP
5 HP
NPSHR FEET (PIES) 3
-
13GOULDS PUMPSCommercial Water
Performance Curves 50 Hz, 2900 RPMCurvas de desempeo 50 Hz, 2900 RPM
Optional ImpellerImpulsor optativo
Ordering Code Dia. Cdigo de pedido Di.
A 51516" B 558" C 5
18 D 4
NOTE:Pumpwillpassasphereto716"diameter.NOTA: La bomba dejar pasar una esfera de hasta 716 de pulgada de dimetro.
Optional ImpellerImpulsor optativo
Ordering Code Dia. Cdigo de pedido Di.
A 51516" B 5
58
NOTE:Pumpwillpassasphereto"diameter.NOTA: La bomba dejar pasar una esfera de hasta de pulgada de dimetro.
B 558"
C 518"
3 HP
2 HP
Model 3656/3756 S-Group 2900 RPM3AI, BF, AB / Size (Tamao) 112 x 2 6Imp. Dwg. 114-04
% EFF
45
56 62
67
67
69
69
62
56
45
10'
12'
NOTE: Not recommended for operation beyondprinted H-Q curve.NOTA: No se recomienda la operacin ms all de lacurva impresa de H-Q (carga-capacidad).
0
20
40
100
120
0
10
40
60
70
0
16012080400
10 20 m3 hr
U.S. GPM
30 35
20 60 100 140
5 15 25
80
60
20
METERSMETROS
FEETPIES
TOTA
L DY
NAMIC HEA
D (CAR
GA DINM
ICA TO
TAL)
CAPACITY (CAPACIDAD)
3'4'
A 51516" DIA.
D 434"
7'
1.5 HP
NPSHR FEET (PIES)
0
40
60
100
120
0
10
20
30
40
0
12080400
10 20 m3 hr
U.S. GPM
30
20 60 100 140
20
80
5 15 25
METERSMETROS
FEETPIES
TOTA
L DY
NAMIC HEA
D (CAR
GA DINM
ICA TO
TAL)
CAPACITY (CAPACIDAD)
Model 3656/3756 S-Group 2900 RPM3AI, BF, AB / Size (Tamao) 112 x 2 6HImp. Dwg. 114-18 H = High Head Impeller H = Impulsor de carga alta
A 51516" DIA.
B 558"7'
10'
50% EFF
50
55
55
61
61
66
66
3'
4'
NOTE: Not recommended for operationbeyond printed H-Q curve.NOTA: No se recomienda la operacin ms all dela curva impresa de H-Q (carga-capacidad).
NPSHR FEET (PIES)
12'
2 HP
-
14GOULDS PUMPSCommercial Water
Performance Curves 50 Hz, 2900 RPMCurvas de desempeo 50 Hz, 2900 RPM
Optional ImpellerImpulsor optativo
Ordering Code Dia. Cdigo de pedido Di.
A 7116" B 678 C 6916 D 6 E 51116 F 5716 G 5316 H 4 J 4 K 4116
NOTE:Pumpwillpassasphereto516"diameter.NOTA: La bomba dejar pasar una esfera de hasta 516 de pulgada de dimetro.
Optional ImpellerImpulsor optativo
Ordering Code Dia. Cdigo de pedido Di.
A 8116" B 758 C 6 D 5
NOTE:Pumpwillpassasphereto316"diameter.
NOTA: La bomba dejar pasar una esfera de hasta 316 de pulgada de dimetro.
% EFF
Model 3656/3756 S-Group 2900 RPM5AI, BF, AB / Size (Tamao) 112 x 2 8Imp. Dwg. 118-88
47
7 12 HP 5 HP
3 HP
10 HP
47 57
64
68
6'
10'
13'
15'57
NOTE: Not recommended for operation beyondprinted H-Q curve.NOTA: No se recomienda la operacin ms all de lacurva impresa de H-Q (carga-capacidad).
NPSHR FEET (PIES)
D 534"
C 634"
B 758"
A 8116" DIA. 7'64
0
50
100
0
10
60
0
150500
10 20 m3 hr
U.S. GPM100 200
30 40 50
200
150
40
20
30
50
70
METERSMETROS
FEETPIES
TOTA
L DY
NAMIC HEA
D (CAR
GA DINM
ICA TO
TAL)
CAPACITY (CAPACIDAD)
Model 3656/3756 S-Group 2900 RPM4AI, BF, AB / Size (Tamao) 212 x 3 7Imp. Dwg. CN0712R00
10 HP
10'12' 15'
NOTE: Not recommended for operation beyond printedH-Q curve.NOTA: No se recomienda la operacin ms all de la curvaimpresa de H-Q (carga-capacidad).
00
50
0
0
m3 hr
U.S. GPM50
20
40
10
100
80
60
20
100
40
120
140
160
30
20
10
150 200 250 300
40 6030 50 70
METERSMETROS
FEETPIES
TOTA
L DY
NAMIC HEA
D (CAR
GA DINM
ICA TO
TAL)
CAPACITY (CAPACIDAD)
% EFF
7 12 HP
70
68
5 HP
2 HP
3 HP
7'
D 6
E 511/16
H 43/4
J 41/2
K 41/16
3 NPSHR FEET (PIES)
5'70
6864
6050
C 69/16
F 57/16
A 71/16'' DIA.
B 67/8
G 53/16
-
15GOULDS PUMPSCommercial Water
Performance Curves 50 Hz, 2900 RPMCurvas de desempeo 50 Hz, 2900 RPM
Optional ImpellerImpulsor optativo
Ordering Code Dia. Cdigo de pedido Di.
A 7116" B 6
38 C 5
D 41116
F 6
NOTE:Pumpwillpassasphereto716"diameter.NOTA: La bomba dejar pasar una esfera de hasta 716 de pulgada de dimetro.
% EFF
Model 3656/3756 S-Group 2900 RPM6AI, BF, AB / Size (Tamao) 3 x 4 7Imp. Dwg. 114-05
378'
50
50
62
67
67
69
69
9'
5 HP
7 12 HP
10 HP
15 HP
62
14'
20'
F 6"
NOTE: Not recommended for operation beyondprinted H-Q curve.NOTA: No se recomienda la operacin ms all de lacurva impresa de H-Q (carga-capacidad).
A 7116" DIA.
B 638"
C 512"
D 41116"
0
40
0
4502001000
20 m3 hr
U.S. GPM
40
50 150 400 5000
10
5
60 80
20
40
60
80
100
120
140
160
15
20
25
30
35
45
50
250 300 350 550 600 650
100 120 140
METERSMETROS
FEETPIES
TOTA
L DY
NAMIC HEA
D (CAR
GA DINM
ICA TO
TAL)
CAPACITY (CAPACIDAD)
6 NPSHR FEET (PIES)
-
16GOULDS PUMPSCommercial Water
3656 S-Group Materials of ConstructionMateriales de construccin - Grupo S, modelo 3756
NOTE:Pumps will be shipped with top-vertical discharge position as standard. For other orientations, remove casing bolts rotate discharge to desired position replace and tighten bolts to 25 ft./lbs. Note that discharge may extend below motor mounting surface in bottom-horizontal position; adequate clearance must be provided.
NOTA:Las bombas salen de la fbrica con la des-carga orientada en posicin vertical superior de manera estndar. Para modificar la orien-tacin, retirar los pernos de la carcasa, hacer girar la descarga hasta la posicin deseada y volver a colocar los pernos, ajustndolos a una torsin de 25 pies/libras. Se ha de notar que la descarga se puede extender por debajo de la superficie de montaje del motor en la posicin horizontal inferior; por lo tanto, debe proveerse suficiente espacio.
For separate seal housing and adapter construction, all bronze material only, see repair parts page.
Para la construccin separada del compartimiento del sello y el adaptador, materiales de bronce nicamente, con-sulte la pgina de piezas de repuesto.
1
AISI 1045 steel motor shaft extension (typical)Extensin del eje del motor de acero AISI 1045 (tpico)
101
103
383
178
126
198
199
370408
513 108
371
100
Back wearing ring on S-Group (2 x 3 7) onlyAnillo de desgaste posterior en elGrupo S (2 x 3 7) nicamente.
1
Item No. Description
Materials, Materiales No. tem Descripcin
All Iron Bronze Fitted All Bronze Todo hierro Accesorios de bronce Todo bronce
100 Casing, Carcasa 1001 101 Impeller, Impulsor 1101
1101
103
Casing wear ring, 1001 1618 1618 Anillo de desgaste de la carcasa
108 Adapter, Adaptador 1001 1001 184 Seal housing, Cubierta del sello One piece with adapter, Una pieza con adaptador 1101 126 Shaft sleeve, Camisa del eje
AISI Type 300 series stainless steel 198 Impeller bolt, Perno del impulsor Acero inoxidable serie AISI tipo 300 199 Impeller washer, Arandela del impulsor 178 Impeller key, Chaveta del impulsor Carbon Steel, Acero al carbono
370 Hex head cap screw (adapter to case), Tornillo de
cabeza hexagonal (del adaptador a la cubierta) Steel SAE 1200 Grade 5
371 Hex head cap screw (adapter to motor), Tornillo de Acero SAE 1200 grado 5
cabeza hexagonal (del adaptador al motor) 383 Mechanical seal, Sello mecnico See seal chart, Ver tabla del sello
408 Pipe plug " or 38",
Tapn de tubos de de pulgada 38 de pulgada Steel, Acero Bronze, Bronce
513 O-ring, Anillo en O BUNA-N, BUNA-N
Material Code, Cdigo de material Engineering Standard, Norma de ingeniera
1101 Cast iron ASTM A48 CL20, Hierro fundido ASTM A48 CL20 1101 Silicon bronze ASTM B584, C87500, Siliciuro de bronce ASTM B584, C87500 1618 Bizmuth brass, Latn al bismuto
Packed Box Arrangement, Caja prensaestopas Item No., No. tem Description, Descripcin Materials, Materiales 105 Lantern ring, Aro de linterna TeflonTM
106
Packing, 5 rings; Teflon Impregnated, Empaquetadura, 5 aros Impregnado de Teflon 107 Gland, Casquillo AISI 316SS 126 Shaft sleeve, Camisa del eje
AISI Type 300 Series Stainless Steel 353 Gland stud, Perno del casquillo
Acero inoxidable serie AISI tipo 300 355 Gland nut, Tuerca del casquillo
105 106 107
353
126
355
PackedBoxArrangementCaja prensaestopas
0 Carbon,
Ceramic, Cermica BUNA-N 10K13 1
Carbn Sil-Carbide, EPR 10K19
3 Carburo de Viton
10K27 5 Sil-Carbide silicona 10K64 9 Packed Box Design with BUNA O-Ring, Diseo de prensaestopas empacado con anillo en O de BUNA 15K16Note: 10K27 replaces obsolete 10K25, Nota: La 10K27 reemplace la obsoleta 10K25.
Seal Code,Cdigodel Sello
Stationary,Estacionario
Type 21 Mechanical Seal, Tipo 21 sello mecnico
Elastomers,Elastmeros
316 SS,316 Acero inoxidable
Metal Parts,Partes Metlicas
Rotary,Rotativo
Part No.,Pieza
Nmero
-
17GOULDS PUMPSCommercial Water
3756 S-Group Materials of ConstructionMateriales de construccin - Grupo S, modelo 3756
NOTE:Above shows typical AI or BF construction. For separate seal housing adapter, all bronze con-struction, see repair parts.
Pumps will be shipped with top-vertical discharge position as standard. For other orientations, remove casing bolts rotate discharge to desired position replace and tighten bolts to 25 ft./lbs. Note that discharge may extend below motor mounting surface in bottom-horizontal position; adequate clearance must be provided.
NOTA:Esta informacin corresponde a las construcciones tpicas AI y BF. Para el adaptador separado del comparti-miento de sellos y construccin en todo bronce, consulte las partes de repuesto.
Las bombas salen de la fbrica con la descarga orientada en posicin vertical superior de manera estndar. Para modificar la orientacin, retirar los pernos de la carcasa, hacer girar la descarga hasta la posicin deseada y volver a colocar los pernos, ajustndolos a una torsin de 25 pies/libras. Se ha de notar que la descarga se puede extender por debajo de la superficie de montaje del motor en la posicin horizontal inferior; por lo tanto, debe proveer-se suficiente espacio.
Item No. Description
Materials, Materiales No. tem Descripcin
All Iron Bronze Fitted All Bronze Todo hierro Accesorios de bronce Todo bronce
100 Casing, Carcasa 1001 101 Impeller, Impulsor 1101
1101
103
Casing wear ring, 1001 1618 1618 Anillo de desgaste de la carcasa
108 Adapter, Adaptador 1001 1001 184 Seal housing, Cubierta del sello One piece with adapter, Una pieza con adaptador 1101 112 Ball bearing (outboard), Cojinete de bolas (exterior) Steel, Acero
122 Shaft, Eje Carbon steel,
Acero al carbono 123 V-ring (Deflector), Anillo en V (Deflector) BUNA-N 126 Shaft sleeve, Camisa del eje AISI Type 303 SS, Acero inoxidable AISI tipo 303 134 Bearing cover, Cubierta del cojinete 1001 168 Ball bearing (inboard), Cojinete de bolas (interior) Steel, Acero 178 Impeller key, Chaveta del impulsor Carbon steel, Acero al carbono 198 Impeller screw, Tornillo del impulsor AISI Type 303 Series SS 199 Impeller washer, Arandela del impulsor Acero inoxidable serie AISI tipo 300
228 Bearing frame, Marco de cojinete 1001 333A Lip seal, Sello con reborde
370 Hex head cap screw (adapter to case), Tornillo de
cabeza hexagonal (del adaptador a la cubierta)
370B Hex head cap screw (adapter to bearing frame),Tornillo de
cabeza hexagonal (del adaptador al marco de cojinetes) Steel SAE 1200 Grade 5
370C
Hex head cap screw (bearing cover to frame),Tornillo de Acero SAE 1200 grado 5
cabeza hexagonal (de la cubierta de cojinetes al marco) 382 Retaining ring, Anillo de retencin 383 Mechanical seal, Sello mecnico See seal chart, Ver tabla del sello
408 Pipe plug " or 38",
Tapn de tubos de de pulgada 38 de pulgada Steel, Acero Bronze, Bronce
513 O-ring, Anillo en O BUNA-N, BUNA-N
Material Code, Cdigo de material Engineering Standard, Norma de ingeniera
1101 Cast iron ASTM A48 CL20, Hierro fundido ASTM A48 CL20 1101 Silicon bronze ASTM B584, C87500, Siliciuro de bronce ASTM B584, C87500 1618 Bizmuth brass, Latn al bismuto
100
178
198
101
199
103
126
383
408 370 123
382
333A
134
112122228168108513 370C
370B
Packed Box Arrangement, Caja prensaestopas Item No., No. tem Description, Descripcin Materials, Materiales 105 Lantern ring, Aro de linterna TeflonTM
106 Packing, 5 rings; Empaquetadura, 5 aros Teflon Impregnated, Impregnado de Teflon 107 Gland, Casquillo AISI 316SS 126 Shaft sleeve, Camisa del eje
AISI Type 300 Series Stainless Steel, 353 Gland stud, Perno del casquillo Acero inoxidable serie AISI tipo 300 355 Gland nut, Tuerca del casquillo
105 106 107
353
126
355
Packed Box ArrangementCaja prensaestopas
-
18GOULDS PUMPSCommercial Water
CP DC Wt. (lbs.) Motor Frame Size, Bastidor Pump Suction Discharge Max. Max. DD R W X Y Z Pesos 140 180 210 250
Bomba Succin Descarga
(libras) L 1 x 2 7
1 27 3
1116 418 5 3 4 52 10 10
1 x 2 8
2 4 4 31516 5 3316 4 52
1 x 2 6 1
23 3 1
4 258
3 34 9 10
1 x 2 8 2718 538 458 4 5 4 54 1138 11
58 2 x 3 7 3 2 2558 518 4 11316 6
3 4 49 1018 10 11
3 x 4 7 4* 3* 25 5 518 3 438 2 4 82 9 10
38 1138
3656 S-Group Dimensions and WeightsGrupo S, modelo 3656 - Peso y dimensiones
NOTE:All pumps shipped in vertical discharge position. May be rotated in 90 increments. Tighten casing bolts to 25 ft./lbs. torque.
NOTA:Todas las bombas se embarcan con la descarga en posicin vertical. Esta posicin puede rotarse en incrementos de 90. Ajustar los pernos de la carcasa a una torsin de 25 pies/libras.
ABMAX. Z R
X
DG
E EA
14" NPT
DCMAX
DD
Y W
L F FB
CPMAX.
PMAX.
H - 4 HOLES4 ORIFICIOS
Motor Frame 3500 RPM 1750 RPM Bastidor 1 Phase 3 Phase 1 Phase 3 Phase del motor ODP TEFC ODP TEFC ODP TEFC ODP TEFC 143 , 1, 1 , 1, 1 , 1, 1 , , , 1 , , 1 145 2 2, 3 2, 3 1, 1 1, 2 1, 2 182 3 3 5 3 3 2, 3 3 3 184 5 3, 5 7 5 5 5 213 7 10 7 5 7 7 215 10 15 10, 15 254TCZ 20 256TCZ 25 20, 25
All dimensions in inches and weights in lbs. Do not use for construction purposes.Todas las dimensiones estn en pulgadas, el peso en libras. No utilizar para fines de construccin.
Motor Frames and Horsepower Bastidores del motor y potencia en HP
Pump Dimensions and Weights (Dimension L determined by Pump and Motor)Peso y dimensiones de la bomba (la dimensin L est determinada por la bomba y el motor)
DISCHARGEDESCARGA
SUCTIONSUCCIN
Frame Size JM AB
P Weight (lbs.)
Tamao del A B D E F G H
(Max.)
bastidor JM (Max.)
Pesos (libras)
143 2 41
145 6 5 6 3 2 2
18 1132 6
58 57
182 2 77 184
8 578 6 4 3 2 316 1332 778 97
213 2 122 215
9 738 8 5 4 3
732 1332 958 155 254 TCZ 9 418 265 256 TCZ
11 9 11
6 5 5
1732 11 320
Mechanical SealSello mecnico
Motor Dimensions and Weights (may vary with manufacturer)* Peso y dimensiones del motor (pueden variar de acuerdo al fabricante) *
*For use with ANSI class 150 mating flange. All others are NPT connections.* Para uso con brida de contacto ANSI clase 150. Todas las dems son conexiones NTP.
-
19GOULDS PUMPSCommercial Water
CP DC Wt. (lbs.) Motor Frame Size, Bastidor Pump Suction Discharge Max. Max. DD R W X Y Z Pesos 140 180 210 250
Bomba Succin Descarga
(libras) L 1 x 2 7
1 30 3 7316 5 3 4 52 13116
131316
1 x 2 8
2 4 4 7 5 3316 4 52
1 x 2 6 1
26 3 1
4 258
3 34 121316
13916
1 x 2 8 3018 538 458 7516 5 4 54 14716 11
58 2 x 3 7 3 2 2858 518 4 11316 6
3 4 49 13316 131316 14
1316
3 x 4 7 4* 3* 28 5 518 3 7716 2 4 82 12
1316 13716 14
716
3656 S-Group Dimensions and WeightsGrupo S, modelo 3656 - Peso y dimensiones
NOTE:All pumps shipped in vertical discharge position. May be rotated in 90 increments. Tighten casing bolts to 25 ft./lbs. torque.
NOTA:Todas las bombas se embarcan con la descarga en posicin vertical. Esta posicin puede rotarse en incrementos de 90. Ajustar los pernos de la carcasa a una torsin de 25 pies/libras.
1116
ABMAX. Z R
X
DG
E EA
14" NPT
DCMAX
DD
Y W
L F FB
CPMAX.
PMAX.
H - 4 HOLES4 ORIFICIOS
Motor Frame 3500 RPM 1750 RPM Bastidor 1 Phase 3 Phase 1 Phase 3 Phase del motor ODP TEFC ODP TEFC ODP TEFC ODP TEFC 143 JP 1 145 JP 3 2, 3 1, 2 1, 2 182 JP 3 5 3 3 3 184 JP 5 7 5 5 5 213 TCZ 7 10 7 5 215 TCZ 10 15 10, 15 254 TCZ 20 256 TCZ 25
All dimensions in inches and weights in lbs. Do not use for construction purposes.Todas las dimensiones estn en pulgadas, el peso en libras. No utilizar para fines de construccin. TCZ indicates west coast fit.
Motor Frames and Horsepower Bastidores del motor y potencia en HP
Pump Dimensions and Weights (Dimension L determined by Pump and Motor)Peso y dimensiones de la bomba (la dimensin L est determinada por la bomba y el motor)
DISCHARGEDESCARGA
SUCTIONSUCCIN
Frame Size JP AB
P Weight (lbs.)
Tamao del A B D E F G H
(Max.)
bastidor JP (Max.)
Pesos (libras)
143 2 41
145 6 5 6 3 2 2
18 1132 6
58 57
182 2 77 184
8 578 6 4 3 2 316 1332 778 88
213 TCZ 2 122 215 TCZ
9 738 8 5 4 3
732 1332 958 155 254 TCZ 9 2 265 256 TCZ
11 9 11
6 5 3
1732 11 320
TCZ indicates west coast fit.
Packed BoxCaja prensaestopas
Motor Dimensions and Weights (may vary with manufacturer)* Peso y dimensiones del motor (pueden variar de acuerdo al fabricante) *
*For use with ANSI class 150 mating flange. All others are NPT connections.* Para uso con brida de contacto ANSI clase 150. Todas las dems son conexiones NTP.
-
20GOULDS PUMPSCommercial Water
3756 S-Group Dimensions and WeightsGrupo S, modelo 3756 - Peso y dimensiones
NOTE:All pumps shipped in vertical discharge position. May be rotated in 90 increments. Tighten casing bolts to 25 ft./lbs. torque.
Dimensions in inches, weights in lbs. Do not use for construction purposes.
NOTA:Todas las bombas se embarcan con la descarga en posicin vertical. Esta posicin puede rotarse en incrementos de 90. Ajustar los pernos de la carcasa a una torsin de 25 pies/libras.
Dimensiones en pulgadas, peso en libras. No utilizar para fines de construccin.
Pump Suction Discharge
DC
Wt.(lbs.)
Bomba Succin Descarga CP
Max. DD L R W X Y Z Pesos (libras)
1 x 2 7 3 418 5 3 4 84 1 x 2 8 1 16 4 4 8 1
116 31516 5 3316 4 84 1 x 2 6 2 3 4 3 66 1 x 2 8 1 16 538 458
7
1 4 5
258 4 86 2 x 3 7 3 2 1678 518 4 818 11316 3 4 81
3 x 4 7 4* 3* 16 5 518 7 3 4
38 6 2 4 114
*For use with ANSI class 150 mating flange. All others are NPT connections.* Para uso con brida de contacto ANSI clase 150. Todas las dems son conexiones NTP.
Z R DISCHARGEDESCARGA
SUCTIONSUCCIN
" NPT
X
2 L
7
5
2 56
4 HOLES4 ORIFICIOS
716 DIA.
KEYWAYCHAVETERO
x 18
Y W
3
1.1251.124 DIA.
DCMAX
DD
Pump Dimensions and Weights (Dimension L determined by Pump and Motor)Peso y dimensiones de la bomba (la dimensin L est determinada por la bomba y el motor)
CP
Mechanical SealSello mecnico
-
21GOULDS PUMPSCommercial Water
3756 S-Group Dimensions and WeightsGrupo S, modelo 3756 - Peso y dimensiones
NOTE:All pumps shipped in vertical discharge position. May be rotated in 90 increments. Tighten casing bolts to 25 ft./lbs. torque.
Dimensions in inches, weights in lbs. Do not use for construction purposes.
NOTA:Todas las bombas se embarcan con la descarga en posicin vertical. Esta posicin puede rotarse en incrementos de 90. Ajustar los pernos de la carcasa a una torsin de 25 pies/libras.
Dimensiones en pulgadas, peso en libras. No utilizar para fines de construccin.
Pump Suction Discharge
DC
Wt.(lbs.)
Bomba Succin Descarga CP
Max. DD L R W X Y Z Pesos (libras)
1 x 2 7 3 7316 5 3 4 84 1 x 2 8 1 19
716 4 4 11116 1
116 7 5 3316 4 84 1 x 2 6 2 3 4 3 66 1 x 2 8 1 19
916 538 458 101316
1
7516 5
258 4 86 2 x 3 7 3 2 191516 518 4 11316 11316 3 4 81
3 x 4 7 4* 3* 19916 5 518 101316 3 7
716 6 2 4 114
*For use with ANSI class 150 mating flange. All others are NPT connections.* Para uso con brida de contacto ANSI clase 150. Todas las dems son conexiones NTP.
Z R DISCHARGEDESCARGA
SUCTIONSUCCIN
" NPT
X
2 L
7
5
2 56
4 HOLES4 ORIFICIOS
716 DIA.
KEYWAYCHAVETERO
x 18
Y W
3
1.1251.124 DIA.
DCMAX
DD
Pump Dimensions and Weights (Dimension L determined by Pump and Motor)Peso y dimensiones de la bomba (la dimensin L est determinada por la bomba y el motor)
CP
Packed BoxCaja prensaestopas
-
22GOULDS PUMPSCommercial Water
Wt.(lbs.) Motor Frame Size, Tamao del bastidor Pump Suction Discharge CP DC DD R W X Y Z Pesos 140 / 180 210 250 / 280 Bomba Succin Descarga Max. Max. (libras) HL 1 x 2 7
1 1638 3 418 5 3 4 84
1 x 2 8 2 4 4 1
116 31516 5 3316 4 84 1 x 2 6
1 16 3 4 3 66 9 7
1 x 2 8 538 1 4 5 2
58 4 86 2 x 3 7 3 2 1678 518 4 11316 6
3 4 81 958 818 4
38
3 x 4 7 4* 3* 16 5 518 3 438 2 4 114 9 7 7
3756 S-Group Dimensions and WeightsGrupo S, modelo 3756 - Peso y dimensiones
Bedplate Dimensions and Weights, Pesos y dimensiones de la place de asiento Motor Frame Motor Bearing Frame Weight (lbs.) Bastidor HA HB HD HE HF HG HP* Shim Shim Cua del Pesos del motor Cua marco de cojinetes (libras)
143 T 145 T
1
182 T 10 28 8 3 24 2 48
184 T
213 T 215 T
12 31 8 4 29 3 1 65
254 T 256 T
13 42 9 5 38 4 1
1 110
284 TS/T 15 44 10 5 40 3 1 124
* HP Dimension at Motor end only. * Dimensin HP al extremo del motor nicamente.
Z R
X
ABMAX
HE HE
HA
DD
" NPT HF
HB
HP
4 HOLES58 DIA.
4 ORIFICIOS
P MAX
3
3
CP
YSINGLE PHASE
ONLY
DCMAX
1.1251.124
HD
HG
W
HL
C MAX
(Motor End Only)(Extremo del motor nicamente)
DIA.
DISCHARGEDESCARGA
SUCTIONSUCCIN
NOTE:1. All pumps shipped in vertical discharge position. May be rotated in 90 increments. Tighten casing bolts to 25 ft./lbs. torque.
2. Dimensions in inches, weights in lbs. Do not use for con-struction purposes.3. Motor dimensions and weights very with manufacturer.
NOTA:1. Todas las bombas se embarcan con la descarga en posicin ver-tical. Esta posicin puede rotarse en incrementos de 90. Ajustar los pernos de la carcasa a una torsin de 25 pies/libras.2. Dimensiones en pulgadas, peso en libras. No utilizar para fines de construccin.3. Las dimensiones y el peso de los motores varan de acuerdo al fabricante.
Motor Frame 3500 RPM 1750 RPM Wt. (lbs.) Bastidor 1 Phase 3 Phase 1 Phase 3 Phase
AB C P Pesos
del motor ODP TEFC ODP TEFC ODP TEFC ODP TEFC Max. Max. Max.
(libras)
143 T ,1,1 ,1,1 ,1,1 ,1,1 , , ,,1 ,,1 5
1338 5 45
145 T 2 2 2,3 2,3 1,1 1,1 1,2 1,2 14 53 182 T 3 3 5 3 2 2,3 3 3
578 1658 578
74 184 T 5 3,5 7 5 3 5 5 1818 95 213 T 7 10 7 5 7 7 738
18 738 116
215 T 10 15 10,15 1918 136 254 T 20
1018 2158 1018
266 256 T 25 20,25 2338 264 284 TS/T 30 25 1258 2478 15 392
SPACER COUPLING, ACOPLAMIENTO ESPACIADORCOUPLING GUARD, PROTECTOR DE ACOPLAMIENTO
Motor Dimensions and Weights, Peso y dimensiones del motor
*For use with ANSI class 150 mating flange. All others are NPT connections.* Para uso con brida de contacto ANSI clase 150. Todas las dems son conexiones NTP.
KEYWAYCHAVETERO
18 x
MONOFSICO SOLAMENTE
Mechanical SealSello mecnico
Pump Dimensions and Weights (Dimension HL determined by Pump and Motor)Peso y dimensiones de la bomba (la dimensin HL est determinada por la bomba y el motor)
-
23GOULDS PUMPSCommercial Water
Motor Frame 3500 RPM 1750 RPM Wt. (lbs.) Bastidor 1 Phase 3 Phase 1 Phase 3 Phase
AB C P Pesos
del motor ODP TEFC ODP TEFC ODP TEFC ODP TEFC Max. Max. Max.
(libras)
143 T ,1,1 ,1,1 ,1,1 ,1,1 , , ,,1 ,,1 5
1338 5 45
145 T 2 2 2,3 2,3 1,1 1,1 1,2 1,2 14 53 182 T 3 3 5 3 2 2,3 3 3
578 1658 578
74 184 T 5 3,5 7 5 3 5 5 1818 95 213 T 7 10 7 5 7 7 738
18 738 116
215 T 10 15 10,15 1918 136 254 T 20
1018 2158 1018
266 256 T 25 20,25 2338 264 284 TS/T 30 25 1258 2478 15 392
Wt.(lbs.) Motor Frame Size, Tamao del bastidor Pump Suction Discharge CP DC DD R W X Y Z Pesos 140 / 180 210 250 / 280 Bomba Succin Descarga Max. Max. (libras) HL 1 x 2 7
1 19716 3 7316 5 3 4 84
1 x 2 8 2 4 4 1
116 7 5 3316 4 84 1 x 2 6
1 19916 3 4 3 66 12
516 101316 1 x 2 8 538
1 7516 5 258
4 86 2 x 3 7 3 2 191516 518 4 11316 6
3 4 81 121116 11316 7
716
3 x 4 7 4* 3* 19916 5 518 3 7716 2 4 114 12
516 101316 10
116
3756 S-Group Dimensions and WeightsGrupo S, modelo 3756 - Peso y dimensiones
Motor Frame Motor Bearing Frame Weight (lbs.) Bastidor HA HB HD HE HF HG HP* Shim Shim Cua del Pesos del motor Cua marco de cojinetes (libras)
143 T 145 T
1
182 T 10 28 8 3 24 2 48
184 T
213 T 215 T
12 31 8 4 29 3 1 65
254 T 256 T
13 42 9 5 38 4 1
1 110
284 TS/T 15 44 10 5 40 3 1 124
* HP Dimension at Motor end only. * Dimensin HP al extremo del motor nicamente.
Z R
X
ABMAX
HE HE
HA
DD
" NPT HF
HB
HP
4 HOLES58 DIA.
4 ORIFICIOS
P MAX
3
3
CP
YSINGLE PHASE
ONLY
DCMAX
1.1251.124
HD
HG
W
HL
C MAX
(Motor End Only)(Extremo del motor nicamente)
DIA.
DISCHARGEDESCARGA
SUCTIONSUCCIN
NOTE:1. All pumps shipped in vertical discharge position. May be rotated in 90 increments. Tighten casing bolts to 25 ft./lbs. torque.
2. Dimensions in inches, weights in lbs. Do not use for con-struction purposes.3. Motor dimensions and weights very with manufacturer.
NOTA:1. Todas las bombas se embarcan con la descarga en posicin ver-tical. Esta posicin puede rotarse en incrementos de 90. Ajustar los pernos de la carcasa a una torsin de 25 pies/libras.2. Dimensiones en pulgadas, peso en libras. No utilizar para fines de construccin.3. Las dimensiones y el peso de los motores varan de acuerdo al fabricante.
SPACER COUPLING, ACOPLAMIENTO ESPACIADORCOUPLING GUARD, PROTECTOR DE ACOPLAMIENTO
Bedplate Dimensions and Weights, Pesos y dimensiones de la place de asiento
Motor Dimensions and Weights, Peso y dimensiones del motor
*For use with ANSI class 150 mating flange. All others are NPT connections.* Para uso con brida de contacto ANSI clase 150. Todas las dems son conexiones NTP.
KEYWAYCHAVETERO
18 x
MONOFSICO SOLAMENTE
Packed BoxCaja prensaestopas
Pump Dimensions and Weights (Dimension HL determined by Pump and Motor)Peso y dimensiones de la bomba (la dimensin HL est determinada por la bomba y el motor)
-
Specifications
Capacities to: 550 GPM (125 m3/hr) at 3500 RPM350 GPM (79 m3/hr) at 1750 RPM
Heads to: 280 feet TDH (85 m) at 3500 RPM67 feet TDH (20 m) at 1750 RPM
Working pressure to: 175 PSIG (12 bars)
Suction pressure to:100 PSIG (7 bars)
Maximum temperature to:212F (100C) with standard seal or 250F (121C) with optional seal.
Motor: NEMA standard JM frame or JP frame for 3656 or T-frame for 3756. Open drip-proof, totally enclosed fan cooled and explosion proof enclosures available. Single phase (115/208 230 V), to 3 HP (208 230 V) 5 HP and (230V only) on 7, 10 HP. Three phase (208 230/460 V) standard note that 20 and 25 HP are (230/460 V).
Direction of Rotation: Clockwise viewed from motor end.
Typical Applications
Booster service
Spraying systems
Irrigation
Water circulation
Liquid transfer
General purpose pumping
Especificaciones
Capacidad hasta:550 GPM (125 m 3/hr) a 3500 RPM350 GPM (79 m 3/hr) a 1750 RPM
Cargas hasta:280 pies (85 m) carga dinmica total a 3500 RPM67 pies (20 m) carga dinmica total a 1750 RPM
Presin de operacin hasta:175 PSIG (12 bars)
Presin de succin hasta:100 PSIG (7 bars)
Temperatura mxima:212 F (100 C) con sello estndar o 250 F (121 C) con sello optativo.
Motor:Bastidor NEMA JM estndar en el mo-delo 3656 y bastidor NEMA T estndar en el modelo 3756. Las cubiertas disponibles son: abierta a prueba de filtracin, totalmente encerrada con enfriamiento por ventilador y a prueba de explosiones. Monofsico (115/208 230 V), a 3 HP; (208 230 V) 5 HP y (230 V solamente) 7 a 10 HP. Trifsico (208 230/460 V) estndar. Los motores de 20 a 25 HP son de 230/460 V.
Direccin de rotacin:Dextrorsa (sentido de las agujas del reloj) cuando se mira desde el extremo del motor.
Aplicaciones tpicas
Servicio de refuerzo
Sistemas de rociado
Sistemas de riego
Circulacin de agua
Transferencia de lquidos
Aplicaciones de bombeo en general
ITT 2881 East Bayard Street, Seneca Falls, NY 13148Phone: (315) 568-7123 Fax: (315) 568-7973www.goulds.com
Goulds Pumps is a registered trademark of ITT Corporation. ITT, the Engineered Blocks Symbol and Engineered for Life are registered trademarks of ITT Manufacturing Enterprises, Inc.
Goulds Pumps es una marca registrada de ITT Corporation. El ITT, el smbolo ITT Engineered Blocks y Engineered for Life es marcas registradas de ITT Manufacturing Enterprises, Inc.
Copyright 2010 ITT Corporation B363756S July (Julio), 2010 Printed in U.S.A. (Impreso en los E.E.U.U.)SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE. (LAS ESPECIFICACIONES ESTN SUJETAS A CAMBIO SIN PREVIO AVISO.) Engineered for life
ITT