COMBUSTION ENGINEERING SOLUTIONS FOR BOILER APPLICATION

Concept Design Pre-bid analysis including site visit Detail Engineering Equipment Manufacturing Procurement Project Management Testing & Inspection Site Erection & Commissioning Performance Guarantee Test Operation training /education After sales service

DESIGN CODES AND STANDARD: ASME Sec-II ASME Sec - IX ISA 85.1 TEMA NFPA - 85

From past 40 years Jasubhai Combustion Engineering Solution division designs and delivers the most reliable and efficient combustion solutions for the power and steam generators.

Our Power Services team looks beyond just the burner array. We design and deliver Burner Management Systems (BMS), Combustion Control Systems (CCS), startup burners, fuel control station, and fuel handling system. We work along with boiler OEM as partners to provide a customize solution to meet your specific needs. We work along with End Users and EPCs / OEM as partners to offer solutions that include total emission optimization by evaluating the existing burner set and providing high-performance burner solutions with advanced technologies.

Solutions for Boiler Application

End To End Combustion Solutions:

BOILER

Start-up combustion systems are designed to ensure flame stability during start-up procedure.

Complete Solution for hazardous applications Improved efficiency and reduced emissions. Customized design of fuel firing system for Fluidized Bed

Start-up Mounting arrangement for inclined and overbed start-up

position Start-up Solution for crushed coal fired boiler.

Our Low NOx Solution for NOx and CO emissions control.

Heat Duty Capacity for each burner upto 50 MW. Integrates the reliability of a conventional combustion

and advantages of staged combustion. Designed to comply with stringent emission guidelines. Low Optimum consumption of atomizing media (5-7%). Solution for Hazardous Area application.

Solutions for Boiler Startup Combustion System:

Solutions for Main Load Combustion System:

COMBUSTOR

FLAME AFBC/CFBC BOILER

Start-up Solution for Pulverized coal fired Boiler. Mounting on boiler for uniform heat distribution

throughout the furnace. Equipment design to avoid flame impingement on

furnace walls. Installation to suit Pulverized coal fired Combustion

System from various Boiler manufacturer. Combustion Control Instrumentation and Human

Machine Interface (SCADA) for safe operation.

Start-up Solutions for Power Boiler:

BIOGAS FIRED BOILER

Solution for Heat duty requirement during downtime of main unit.

Recuperation Heater Solution for Combustion Air. Heat Exchanger Solution for improved efficiency. Customized heat recovery solution to save fuel cost. Flue gas heat recovery systems to improve efficiency. Utilization of waste fuel and other byproduct.

Solutions for Waste Heat Recovery System:

Solutions for Multi-fuel Combustion System:

Multi-fuel firing Solution for Coke Oven Gas, Blast furnace Gas, Producer Gas, Corex Gas, Biogas, Furnace Oil, Light Diesel Oil, Hight Speed Diesel.

High efficiency with advanced combustion technology for multiple fuels.

Mounting on boiler for uniform heat distribution throughout the furnace.

Low calorific value/ waste fuel combustion solution. Solution for multifuel firing along with Low BTU Gas. Systems having fully automatic, semi-automatic or

manual mode of operation incorporating necessary safety features.

MULTIFUEL COMBUSTION SYSTEM

WASTE HEAT RECOVERY

Customized design for fuel handling system as per type of fuel.

Complete solution for highly viscous and other non-specified fuels.

Fuel storage solutions incorporating, heating, and transfer pumping systems.

Fuel valve trains are designed for start/stop operation in compliance with NFPA standard.

Fuel valve train designed for all types of fuels.

Concept study & Evaluation. Heat & Mass balance calculation with equipment sizing. Evaluation of measuring & control Instrumentation. Design for closed loop control operations. Ease of operation and maintenance. Design to optimize the operating cost.

Solutions for Fuel Handling System:

Retrofit & Modernisation Solutions:

FUEL HANDLING SYSTEM

GAS CONTROL STATION

Instrumentation and Automation:

CEMS

Ensures a complete Secured Automation Package with Real Time Control Loops.

Control Loops Include: - Temperature Control Loop - Air to Fuel Ratio Control - Flow Control Loop Dedicated PLC Based BMS Panel with SIL1, SIL2 Level Automation including

mandatory safety interlocks. Customized SCADA Interface, HMI Screen and Local Service Panel for field operation. Instrumentation suitable for Hazardous area (Zone1, Zone2) application.

Solutions for Continuous Emission Monitoring System:

Cost effective, pre-engineered CEMS Solution to monitor stack gases like CO, SOx, NOx, O2, total hydrocarbons, hydrogen sulphide, particulate matter.

We help you meet data reporting requirements, maintain emissions compliance, and ensure certification and compliance with your local and international regulatory agencies.

We offer either extractive systems or dilution based systems, in-situ analyzers depending on the site requirements.

Our Three Vital CommitmentsCARE - Customers Are Really EverythingCOIN - COntinuous Improvements are NeededTRAC - TRaining Accomplishes Competence

Website: www.jasubhaiengineering.com | Email: sales_ces@jasubhai.com

64/a, GIDC Industrial Estate, Phase-1, Vatwa, Ahmedabad - 382445, Gujarat, India.Tel: +91-79-25831042Fax: +91-79-25831825

Jasubhai International FZCOFZS2 AC01, P O Box: 18403, Jebel Ali, Dubai, UAE.Tel: +97-148860704 / 8862991Fax: +97-148860705

MANUFACTURING FACILITIES

REGIONAL OFFICES

New Delhi803, Chiranjiv Tower, Nehru Place, New Delhi - 110 019, India.

PuneSuite No 210, White House, Sadashiv Peth, Tilak Road, Pune - 411 030, Maharashtra, India.

Vadodara202, Concorde, R. C. Dutt Road, Alkapuri, Vadodara - 390 005, Gujarat, India.

ChennaiJhaver Plaza, 1st floor, 1-A,Nungambakkam High Road Chennai - 600 034,Tamil Nadu, India.

Kolkata44/B Creek Row, Ground Floor,Kolkata - 700 014

OmanJasubhai Engineering Muscat LLCShed No 4B, Building No 1176Plot No 1156, Way No 5222GHALA Industrial AreaMuscat, Oman.

DIVISION OFFICE

110, Thacker Tower, Plot No 86, Sector 17, Vashi, Navi Mumbai - 400 705, Maharashtra, India. Tel: +91-22-42136300 / 6400 Fax: +91-22-42136399

CORPORATE HEAD OFFICE

26, Maker Chamber VI, Floor II,Nariman Point,Mumbai - 400 021Maharashtra, India Tel: +91-22-40373737Fax: +91-22-22870502