BOCLAIR ACADEMY – Technical Dept.. INTRODUCING BOCLAIR ACADEMY – Technical Dept. WHAT IS IT ?...
-
Upload
elinor-wheeler -
Category
Documents
-
view
217 -
download
0
Transcript of BOCLAIR ACADEMY – Technical Dept.. INTRODUCING BOCLAIR ACADEMY – Technical Dept. WHAT IS IT ?...
BOCLAIR ACADEMY – Technical Dept.
BOCLAIR ACADEMY – Technical Dept.
INTRODUCING
BOCLAIR ACADEMY – Technical Dept.
WHAT IS IT ?SEE SOME EXAMPLESHOW DO YOU DO IT ?
BOCLAIR ACADEMY – Technical Dept.
WHAT IS IT ?
Technical Drawing – rarely sketchingMainly used for room interiors
Can also be architectural
Generally start with a plan - rotatedAngle of rotation 45o/45o or 30o/60o or
60o/30o
BOCLAIR ACADEMY – Technical Dept.
SEE SOME EXAMPLES
BOCLAIR ACADEMY – Technical Dept.
ANOTHER EXAMPLE
BOCLAIR ACADEMY – Technical Dept.
AND ANOTHER EXAMPLE
BOCLAIR ACADEMY – Technical Dept.
HOW DO YOU DO IT ?Planometric views are mainly used to show building interiors (rooms) to give a pictorial impression of how the room looks. However, Planometric views can be drawn for any object.For rooms drawn in Planometric, always start with the floor area, this can be shown rotated to an angle of 30o/60o or 45o/45o as shown.
30o 60o 45o 45o
BOCLAIR ACADEMY – Technical Dept.
DRAW IN THE FLOOR AREAVery faintly, draw in the footprint of the furniture on the floor plan.
30o 60o
BOCLAIR ACADEMY – Technical Dept.
CREATE THE BASE UNITSProject vertical lines upwards from each corner of the units. Then draw in the tops of the units.
30o 60o
BOCLAIR ACADEMY – Technical Dept.
NOW DRAW THE WALLSProject vertical heights from the corners of the room.
30o 60o
BOCLAIR ACADEMY – Technical Dept.
NOW ‘LINE IN’ THE ROOMFinally ‘line in’ the correct lines taking care to only draw over the edges that can be seen.
30o 60o
BOCLAIR ACADEMY – Technical Dept.
SUMMARY
Start with initial angles of 30o\60o or 45o\45o for the floor area
Draw in lightly the footprint of the furniture or units
Project vertical lines upward from the corners to the height of the units
Project vertical height of the walls from the corners of the room
Line in the edges that can be seen
BOCLAIR ACADEMY – Technical Dept.
FINISHED
back to menu