Bobcat E55W
-
Upload
foromaquinas -
Category
Documents
-
view
215 -
download
0
Transcript of Bobcat E55W
-
8/14/2019 Bobcat E55W
1/2
E55W Compact Excavators
-
8/14/2019 Bobcat E55W
2/2Bobcat EMEA - Drve Richelle 167 - B-1410 Waterloo, Belgium
w w w . b o b c a t . b e
E55W Specifcations
2008 Bobcat EMEA 4472270-EN (12-08)
Specifcationsanddesignaresubjecttochang
ewithoutnotice.-PicturesoBobcatproductsma
yshowotherthanstandardequipment.
Standard Features1920 mm dozer blade2000 mm dipperstickBoom load holding valveDozer blade safety valveFully adjustable air conditioning
Adjustable suspension seat with high back and lumbarsupportConsoles with forwards/backwards adjustabledisplacementSteering column with adjustable angleSecond auxiliary hydraulic line (Rotation piping)Fingertip auxiliary hydraulic controlsControl console locksHydraulic joystick controlsTwo-speed travel
Storage compartmentHornWork and travel lightsSeat belt* TOPS/ROPS cabinHarness for rotating beaconOverload warning deviceSun visorTwo left and one right rear view mirrorsElectric refueling pump
Auto idleWarranty: 12 months or 2000 hours (whichever comesfirst)
WeightsOperating weight with canopy kgOperating weight with ROPS cab 5550 kg
Additional weight for twin tires 360 kgAdditional weight for long dipperstick 20 kg
EngineMake / model Yanmar / 4TNV98-EFuel / Cooling Diesel / Water Bore / Stroke 98 mm / 110 mm
Maximum power at 2400 RPM (SAE J1349) 40.8 kWMaximum torque at 1550 RPM (SAE Net) 206 NmNumber of cylinders 4Displacement 3.3 l
PerformanceDigging force, standard dipperstick 27000 NDigging force, long dipperstick 24000 NDigging force, bucket 41000 NDrawbar pull 31000 NGround pressure with tires kPaTravel speed, low range 10.0 km/hTravel speed, high range 30.0 km/hMaximum digging depth, standard dipperstick 3495 mmMaximum digging depth, long dipperstick 3795 mm
Hydraulic SystemPump type Two engine-driven piston pumps and two engine-driven
gear pumpsTotal pump capacity 180.3 l/minPiston pump capacity 2 x 60 l/minGear pump capacity 38.9 + 21.4 l/min
Auxiliary flow 52.5 l/minSystem relief pressure for implement and travelcircuits
225 bar
Fluid CapacitiesCooling system 10.0 lEngine lubrication plus oil filter 11.6 lFuel reservoir 120.0 lHydraulic reservoir 72.0 lHydraulic system with bucket and dipper cylinderretracted, bucket on the ground, and blade down
147.8 l
ControlsSteering Direction control by steering wheel and speed governed
by foot pedal on the right hand side.Auxiliary hydraulics Electronic switch on the right hand joystick.Second auxiliary hydraulics Foot pedal on the left hand side.
Slew SystemBoom swing, left 76Boom swing, right 50Slew rate 8.7 RPM
TractionTread width 1600 mmGradeability 25
Working Range
(A) 180
(B) 6400 mm
(B) 6110 mm
(C) 6190 mm
(C) 5980 mm(D) 1990 mm
(D) 1980 mm
(E) 420 mm
(F) 205 mm
(G) 4665 mm
(G) 4665 mm
(H) 6170 mm(H) 5980 mm
(I) 4455 mm
(I) 4265 mm
(J) mm
(J) mm
(K) 3795 mm(K) 3495 mm
Dimensions
H
D
B
C
A
KK
E
P
J
L
(A) 500 mm
(B) 980 mm
(C) 1935 mm
(D) 2100 mm
(E) 1842 mm
(F) mm
(F) 4260 mm
(H) mm
(H) 6120 mm
(J) 1920 mm
(K) 2855 mm
(L) 1600 mm
(M) mm
(N) mm
(O) 1990 mm
(O) 1980 mm
(P) 1650 mm
(Q) mm
OptionsLong armTwin tyres with 2290 mm dozerblade
Third auxiliary hydraulic line(Clamshell Piping)
AttachmentsEjector bucketGrading bucketRipping toothHydraulic breaker
Rotating clamshell bucketTilt bucketTrenching bucket