BNM Institute of Technology - bnmit.org · BNM Institute of Technology o BNMIT Toyota Center of...

BNM Institute of Technology

Department of Mechanical Engineering

Department of Mechanical Engineering 1

Approved by AICTE, Affiliated to VTU, Accredited as Grade A Institution by NAAC.

All UG branches – CSE, ECE, EEE, ISE & Mech.E Accredited by NBA for academic years

2018-19 to 2020-21 & valid upto 30.06.2021

Post box no. 7087, 27 th cross, 12 th Main, Banashankari 2 nd Stage, Bengaluru- 560070, INDIA

Ph: 91-80- 26711780/81/82 Email: [email protected], www. bnmit.org


o Name of the Department : Mechanical Engineering

o Name of the Program : B.E. (UG) in Mechanical Engineering

o Year of Establishment : 2011

o Sanctioned Intake : 60

o Affiliation : Visvesvaraya Technological University, Belagavi, Karnataka

o Affiliation Status : Permanently affiliated


Introduction


o BNMIT Toyota Center of Excellence in association with Toyota Kirloskar Motor Pvt. Ltd. (TKM)

o MoU with Mahatma Gandhi Institute for Rural Energy and Development (MGIRED), Bengaluru.

o Department offers ‘Lathe Operator’ course (Automotive Engineering) under Pradhan MantriKaushal Vikas Yojana (PMKVY), ASDC, Ministry of Skill Development, GoI.


Department Achievements/ Recognition

o Organized 4 Faculty Development Programs since inception

o 14 well set-up laboratories.

o VTU approved R&D center in Mechanical Engineering Department (from 2016-17).

o Publication of biannual student newsletter “Yaantrika”

o Secured University rank for the academic year 2015-16.

o Actively functioning IEI Students’ Chapter under Mechanical Division.

o 10 Industrial visits for students (twice a semester).

o Student Faculty Ratio of 16.5:1

o Consistent results of >90% in the final year.

o Hosted intercollegiate technical fest TATVA-2018 and TATVA-2015.

o Dr. Mukesh Patil visited RIPO, Minsk, Republic of Belarus as a part of internship program.


13-05-2019 Department of Mechanical Engineering 4

Student Working at BNMIT- TOYOTA center of Excellence

Engine Dismantling Transmission Dismantling

Engine Assembly Working of 4WD Engine

Engine Assembly

Working of Transmission System



Laboratories

Sl.No. Name of the laboratory Name of the important equipment

1 Workshop Practice 1.Welding machine 2.Drilling machine3.Bench vice 4.Fitting, sheet metal work and welding tools

2 Engineering Graphics Lab 1.Computers 2.Solid Edge-ST8 3.Laser jet Printer 4.LCD projector

3 Computer Aided Machine Drawing 1.Computers 2.Solid Edge-ST8 3.Laser jet printer 4.LCD projector

4 Material Testing Lab1.Universal testing machine 2.Pin on disc wear tester 3.Torsion testing machine 4.Hardness testers

5.Optical microscopes

5 Foundry and Forging Lab 1.Gas fired furnace 2.Sand testing equipments 3.Moulding boxes 4.Hand tools for moulding and forging

6Mechanical Measurements and Metrology

Lab1.Profile projector 2.Tally surf 3.Slip gauge set 4.Digital micrometer 5.Dynamometer

7 Machine Shop 1.Milling machine 2.Shapingmachines 3.Lathes 4.Radial drilling machine 5.Power hack saw

8 Fluid Mechanics and Machinery Lab1. Pelton wheel 2. Francis turbine 3.Reciprocating and Centrifugal pump 4.Compressor and blower test rig 5.

Flow measuring devices

9 Energy Conversion Lab1.Viscometer 2. Petrol engine test rig-2S and 4S 3.Diesel engine test rig-4S 4. Multi cylinder Diesel engine test

rig

10 Heat Transfer Lab 1.Heat exchangers 2. Refrigeration and air conditioning test rig. 3. Pin-fin and emissivity apparatus

11 Modeling and Analysis Lab 1. Computers 2.ANSYS V15 3.Laser jet printer 4.LCD projector

12 Design Lab 1.Journal bearing 2.Vibration test rig 3. Strain rosettes 4.Universal polariscope 5.Universal governor

13 CIM and Automation Lab 1.Computers 2.Cadem V10 3.SeeNC Turn 4.SeeNC Mill 5.LCD projector

14 Project Lab 1. Data Logger 2. computer 3. ANSYS V15 Research 4. Testing facilites


o New Gen IEDC funded projects (sponsored by NSTEDB, DST, GoI): 03 (Rs.2.5 Lakhs each)

o Shreyas S.P. and Reethan D.L. have started a company by name ‘M/s. Hycube Works Pvt. Ltd.’ at BNMIT Incubation Center, for making 3D Printers through New Gen IEDC.

o Karthik Mohan - two startups: “Tire Club” and “Trident Automotive Corporation” at Trivandrum, Kerala. At present he is pursuing MBA at IIMC, Kolkata.


Student Achievements

o Rahul Raj N. secured 10th Rank in VTU for the academic year 2015-16

o GATE cleared – 06 students; M.S.: 20 students (pursuing higher studies at reputed institutions in Germany, USA, Austria)

o Praful S., an alumnus is pursuing Ph.D at IISc Bengaluru. He is the recipient of ‘Raman Research Institute Fellowship’ for pursuing Ph.D.

o V. Prajwal Rao got recruited as “Sub-Lieutenant” Permanent Commission-General Service ( Executive) in Indian Navy.

Internships (Outside India)

o 02 students – Old Dominion University, Virginia, USA (2017)

o 02 students – RIPO, Minsk, Republic of Belarus (2018)

Internships completed: 63

Student Publications: 15 (last three years)



Batch 2015-2019 2014-2018 2013-2017 2012-2016

No. of Projects

17 19 19 17

In-house Projects

15 16 9 12

Industry Projects

1(BOSCH)

1 (BEL)

5 (BOSCH, VOLVO, SV Industries,

TE Connectivity)

3 (HAL, BOSCH,

Kinetix Solutions)

Projects at research institutes

1(IISc)

2(ISRO, NAL)

5 (IISc, NICE/DSC, Bengaluru,

ISRO)

2 (IISc)

Best Project on GoingDevelopment and

fabrication of smartwaste segregator

Evaluation of operating temperature of heat pipe - heat

sink with different working fluids and its performance

comparison to conventional pin fin heat sink

Development and fabrication of fused

deposition 3D-printer

Student Projects


o Experienced team of teaching faculty: 05 faculty with Ph.D. degree; 10 faculty pursuing Ph.D.

o Ph.D. guidance: 05 research scholars pursuing doctoral research under 03 university approved guides in the department.

o 24 research publications by faculty in reputed national and international journals/ conferences.

o Dr. D. Shivalingappa jointly owns an INDIAN PATENT with IIT, Roorkee (Patent Application No.: 1384/DEL/2007); Patent No:261746.

o Faculty have attended 83 ‘Faculty Development Programs’ in the last 3 years.

o Dr. Mukesh Patil is a BoE member (Mechanical Engineering) at Bangalore University; Dr. D. Shivalingappa is a BoE member (Mechanical Engineering) at CMR University, Bengaluru.

o Innovations in teaching: Virtual Labs


Faculty Achievements

BNM Institute of TechnologyCourse delivery by industry experts


Sl.

No.Name of Industry Expert with affiliation

Semester

taughtTopics covered

1Mr. C.N. Prasad

Operations and Business Head, Rajass Technologies, BangaloreIV Machining Operations

2Mr. Ravi M.

Former Business Division Head, Bosch Ltd., BangaloreVII

Hydraulics and

Pneumatics

Sl.

No.Name of industry expert with affiliation

Suggestions for

program designDetails of implementation

1

Mr. Kiran Arsikere

Senior Executive Manager, Wipro Technologies Ltd.,

Bangalore

To initiate industry

interaction

Signed MoU with Toyota Kirloskar

Motor & MGIRED

2

Mr. K.G. Ravi

General Manager-NPD, Yuken India Pvt. Ltd., Bangalore

To setup industry

supported

laboratories

Established BNMIT-Toyota Center

of Excellence lab

Sl. No.

Initiative Outcome of initiative

1 To establish industry supported laboratories Established BNMIT-Toyota Center of Excellence lab.

2 MoUs with industriesSigned MoUs with M/s Toyota Kirloskar Motor, Bangalore &

MGIRED, Bangalore.

Contribution to program design by industry experts

Initiatives to enhance industry-institute interaction

BNM Institute of TechnologyMoUs/Collaboration with industries


Sl. No. Name of Industry/Institute Proposed activities

1 Toyota Kirloskar Motor, Bangalore Hands-on training in automotive engineering

2Mahatma Gandhi Institute of Rural

Energy & Development, Bangalore

Invited lectures, internship to students, joint research projects,

project work for students, industrial visits and joint publications

Sl. No. Name of the Industry Semester No. of students

1 Vishnu Forge Industries Pvt. Ltd., Bangalore III 58

2 Mahatma Gandhi Institute of Rural Energy & Development, Bangalore V 60

3 Yuken India Pvt. Ltd., Bangalore IV 23

4 Volvo Construction Equipment Pvt. Ltd., Bangalore VI 27

Industrial visits

Sl. No. Initiative Outcome of the initiative

1Opportunity to carry out internship at

Old Dominion University, Virginia, USA2 students successfully completed the internships

2Circulated list of industries with contact details to

encourage internship (last 3 years)

45 out of 63 students have successfully completed

internships through department initiative

Support for industry internships



Sl.

No.

Type of the event

(workshop/

seminar/lecture etc.)

Date

Organized under

professional

societies/ Chapters

Title of event/ talk

1 Workshop

22/04/2019

To

23/04/2019

IEIWorkshop on GD&T by

Dr. Srinivasan V Iyengar, PES University

2 Workshop 14/02/2018 BAME Workshop on CNC Master CAM by Glisten Education

3 Industrial Visit 04/10/2017 IEI

Industrial Visit to Mahatma Gandhi Institute of Rural

Energy and Development

(MGIRED)

4 Workshop

22/09/2017

to

23/09/2017

BITES

“Internet of Things and Analytics”

by

Dr. H.S. Jamadagni, IISc Bangalore

5 Industrial Visit 06/09/2017 IEI Industrial Visit to Vishnu Forge Pvt. Ltd.

6 Seminar 23/08/2017 BAMEPresentation on “Aggression Detection” a project

done at Old Domain University, Norfolk, Virginia

Professional Activities in the DepartmentIEI- Institute of Engineers (India) Students’ Chapter under Mechanical DivisionBAME- BNMIT Association of Mechanical EngineersBITES- Board for IT Education Standards

Professional societies/chapters and organizing engineering events



Sl.

No.Volume Issue Dedicated to Month/ Year

Editorial Team Members

Students

1 Volume 1 Issue 1Dr. A P J Abdul

KalamDec 2015

Shreyash R., Rajat Nandan N. S., Praful S., Prajwal Rao,

Tejas Sharma B. N.

2 Volume 1 Issue 2Rudolf Christian

Karl DieselJune 2016

Shreyash R., Rajat Nandan N. S., Praful S, Prajwal Rao,

Tejas Sharma B. N.

3 Volume 2 Issue 1 James Watt Dec 2016 Praful S., Tejas Sharma B. N., Dipak Srinivas, Nag Poojith

4 Volume 2 Issue 2Felix Heinrich

WankelJune 2017 Praful S., Tejas Sharma B. N., Dipak Srinivas, Nag Poojith

5 Volume 3 Issue 1George

StephensonDec 2017

Tejas Sharma B. N., Dipak Srinivas, Nag Poojith, Samarth

R Hegde

6 Volume 3 Issue 2 Henry Ford June 2018Tejas Sharma B. N., Dipak Srinivas, Nag Poojith, Samarth

R. Hegde

7 Volume 4 Issue 1 Enzo Ferrari, Dec 2018Vighnesh Nandavar, Nagendra Omkar, Ayush Surendra K,

Anegundi Achutha, Nag Poojith.

Department Newsletter (YAANTRIKA)



Innovations by faculty

Faculty participation in faculty development/training activities/STTPs

Sl.No.Name of the Innovative

methods

Whether published in college website?

(Yes/No)

1 Virtual Lab Yes

2Mini projects and cut

section Yes

3Model display and case

studiesYes

4MCQ through Google form and cross words

Yes

2 3

2017-18 2016-17 2015-16 2014-15

Inside Outside Inside Outside Inside Outside Inside Outside

Number of FDPs attended

by faculties15+17 03 18 01 14 05 00 08

Average assessment over three years =29.62 (Marks limited to 15)

https://sites.google.com/view/vlab-bnmitmech/home

1

https://sites.google.com/view/vlab-bnmitmech/home/computer-integrated-machining-lab



Visiting/Adjunct/Emeritus Faculty

Academic Year 2017-18

Sl.

No.Faculty Name Affiliation

Visiting/ Adjunct/

Emeritus Faculty

Semester/

Course Taught

Semester

Session

(odd/even)

No. of hours

of

interaction

1

Dr. K. N. Seetharamu

&

Dr. T. R. Seetharam

Professor, ME Dept.,

PESU, Bengaluru.Adjunct faculty

V

Turbo

Machines

Odd 26

2 Mr. M. Ravi

Business Division

Head, Bosch Ltd.

Bengaluru.

Adjunct faculty

VII

Hydraulics

and

Pneumatics

Odd 26

3 Mr. C. N. Prasad

Rajass Technologies

Operation Business

Head Bengaluru.

Adjunct faculty

IV

Advanced

Machine Tools

Even 26

4 Dr. T. R. SeetharamProfessor, ME Dept.,

PESU, Bengaluru.Adjunct faculty

VI

Heat TransferEven 26




Sl.


Visiting/ Adjunct/

Emeritus Faculty

Semester/Course

Taught

Semester

Session

(odd/even)

No. of hours

of

interaction

1

Dr. K.N. Seetharamu

&

Dr. T.R. Seetharam

Professor, ME

Dept., PESU,

Bengaluru.

Adjunct facultyV

TurboMachinesOdd 26

2 Mr. C.N. Prasad

Rajass Technologies

Operation Business

Head, Bengaluru.

Adjunct facultyVI

Non Traditional

Machining

Even 26




Sl.


Visiting/ Adjunct/

Emeritus Faculty

Semester /

Course

Taught

Semester

Session

(odd/even)

No. of

hours of

interaction

1

Dr. K.N. Seetharamu

&

Dr. T.R. Seetharam

Professor, ME

Dept., PESU,

Bengaluru.

Adjunct faculty

VI

Heat & Mass

Transfer

Even 26



Additional facilities created

Sl. No.

Facility Name Details

1Pin on disc wear testing

machine

Pin on disc wear testing machine as per ASTM G 99. Pin heating system-up to

250oC Provision for wear testing under wet and dry conditions

2.CNC turning center XLTURN

Industrial slant-bed design, PC-based, 8 station programmable turretCNC milling center XLMILL

3 Data LoggerThe GL840 - 20 channel stand alone data logger with isolated/universal inputs

.Suitable for measuring voltage, current, thermocouples and RTD inputs

4Advanced version of ANSYS

Software-ANSYS 15 (CFD)

Create simulation that tests a products’ durability, temperature distribution and

fluid motion

5 3D-Printer

Axis coordinates: X-Axis =200mm : Y-Axis=200mm ; Z-Axis =200mm ; Support

materials: Acrylonitrile Butadiene Styrene(ABS), Poly Lactic Acid (PLA) ,

Technology: Fused Deposit Modeling (FDM)

6 MATLABMATLAB Simulink is used for modeling, simulating, and analyzing mechanical

systems

7 Hydraulic and Pneumatic KitSingle and double acting 1HP hydraulic and pneumatic kit with flow control

valves

8Toyota Innova Engine and

Transmission System

Single and double acting 1HP hydraulic and pneumatic kit with flow control

valves

BNM Institute of Technology - bnmit.org · BNM Institute of Technology o BNMIT Toyota Center of...

Documents

Transcript of BNM Institute of Technology - bnmit.org · BNM Institute of Technology o BNMIT Toyota Center of...