BMW X3 F25 03/14 >> BMW X4 F26 07/14 >> - erich-jaeger.co.nz · BMW X3 F25 03/14 >> BMW X4 F26...
Click here to load reader
Transcript of BMW X3 F25 03/14 >> BMW X4 F26 07/14 >> - erich-jaeger.co.nz · BMW X3 F25 03/14 >> BMW X4 F26...
BMW X3 F25 03/14 >> BMW X4 F26 07/14 >>
750061
Installation instructions
Reference: The following information must be reviewed before beginning the assembly:
The installation instructions are to be thoroughly read. The installation should be carried out by qualified personnel with the relevant technical knowledge. The vehicle manufacturers' current technical notices and information on retrofitting must be followed. The removal and replacement instructions found in the current repair manuals must be followed. It must be ensured that the vehicle is technically suitable for the installation of a trailer hitch.
For the fitment instructions for other models covered by this part go to http://
www.erich-jaeger.co.nz/Solutions/Solutions-BMW.html
orScan this QR code
750061-140116B8 2 / 20
KIT
TOOLS
750061-140116B8 3 / 20
1
750061-140116B8 4 / 20
2 ROUTING
750061-140116B8 5 / 20
3 REMOVE
750061-140116B8 6 / 20
4
750061-140116B8 7 / 20
5
750061-140116B8 8 / 20
6 � 19
��
��
��
���
���
750061-140116B8 9 / 20
7 � 19
��
��
��
���
���
8
��
��
��
���
���
��
��
��
���
���
750061-140116B8 10 / 20
9 � 24
10 � 19
OPTION 1
11 - 12
14 - 27
OPTION 2
13 - 27
750061-140116B8 11 / 20
11 OPTION 1 � 19
12 OPTION 1 � 19
750061-140116B8 12 / 20
13 OPTION 2 � 19
����
����
����
����
750061-140116B8 13 / 20
14 � 19
15
750061-140116B8 14 / 20
16 � 16
17
750061-140116B8 15 / 20
18 � 19
1 ye 2 bk 3 wh 4 gn 5 bu 6 rd 7 bn
19 bk wh gy gn rd bu ye bn pu or no
black white grey green red blue yellow brown purple orange not
occupied
750061-140116B8 16 / 20
20 OPTIONAL � 19
21
750061-140116B8 17 / 20
22 CHECK ALL LIGHTING FUNCTIONS
23 CHECK BULB OUT DETECTION
24 � 9
20 A
750061-140116B8 18 / 20
25
12
750061-140116B8 19 / 20
26 CHECK PDC
27
750061-140116B8 20 / 20
27 CODING
Subject to change in terms of construction, equipment and colour, and may contain errors. The information and illustrations are non-binding.
BMW Service ISTA/P Initialize Trailer Module
Please effect coding as follows:
• Connect computer to vehicle • Start ISTA/P • Click “Modification / Upgrades” • Scan Action plan • Click „Coding (Ethernet)“ • Scan Action program follow-up • Final report checking
After the effected connection, the rear park assist system will also automatically be deactivated in trailer operation!