WORK INSTRUCTION

CUTTING MACHINE OPERATIONDoc. Id No.REVISION

BMI-WI-5711-010

DATEPAGE

21.07.14 2 OF 2

WORK INSTRUCTIONBMI WI- 5711-01 CUTTING MACHINE OPERATION

Revision No. 00Effective Date: July 21, 2014

Prepared by:Date:Reviewed by:Date:Approved by:Date:

1PURPOSEThe purpose of this instruction is to have guidelines for Cutting Machine Operation. 2SCOPEThis procedure applies to Cutting Machine Safety Operation.3RESPONSIBILITY 3.1.Plant Manger Oversee the production process on Cutting Machine operation.3.2.Production ManagerMonitor the activities of Cutting Machine activity.3.3.OperatorOperator shall be responsible that the machine is in good running condition.4.SAFETY MEASURES4.1. Do not use the machine unless you are authorized or have been instructed in its use and operation.4.2. Protective Equipment Required: Protective Clothing, Eye Protection, Steel capped boots and Long hair Restrained.5.PRE-OPERATION5.1 Ensure fixed guards are in place to prevent hands or other parts of the body from entering the trapping space.5.2Inspect equipment before use, for damage parts and cords.5.3Guards or safety devices must never be removed or adjusted, except by and authorized person for maintenance purposes.5.4 Working parts should be well lubricated and free from rust and dirt.5.5Familiarize yourself with and check all machine operations and controls.5.6Ensure cutting table is clear of scrap, tools and faulty equipment must not be used.

6. OPERATIONAL SAFETY6.1 Do not attempt to cut material beyond the capacity of the machines.6.3Use correct lifting procedures when handling large materials..6.4Use the correct cutting speed for blade and material. 6.7Never leave the cutting machine running unattended.7.HOUSEKEEPING7.1Switch off the machine and reset all guards to a fully closed position.7.2Place all tools used back where they belong7.3 Leave the machine in safe, clean and tidy state.