BMI Spirit Levels
Transcript of BMI Spirit Levels
◆ Torsion resistant 4-chamber profile -
cross section (mm): 60(h) x 26(w)
◆ 10 Lengths available - 40cm to 240cm
◆
◆
◆ 2 milled measuring surfaces
◆ 2mm thick walls for long service life
◆ Highest accuracy of 0.5mm/m due toultrasonically-welded vials
◆ Domed round vial with magnifying effect providesunsurpassed readability,also for inverted reading
◆ No more double-bubble trouble!
Aluminium powder-coated spirit level
Thick shock-absorbing rubber end caps
BMI ROBUST POWDER-COATEDALUMINIUM SPIRIT LEVEL
Shock-
absorbing
rubber
end caps
Ultrasonically-
welded vials
Glare-free
reading
Torsion-
resistant
4-chamber
profile
Milled
measuring
surface
Robust Box Level3 VIALS (2 vertical + 1 horizontal)
Level Length(cm)
BM698040
BM698050
BM698060
BM698080
BM698090
BM698120
BM698150
BM698180
BM698200
BM698240
40
50
60
80
90
120
150
180
200
240
Specialfeatures
Quality measuring instruments
BMI Spirit Levels
No moredouble-bubble trouble!
Level Length(cm)
BM69090ES
BM690120ES
BM690150ES
BM690180ES
BM690200ES
90
120
150
180
200
BMI EUROSTARANODIZED ALUMINIUM SPIRIT LEVEL
◆ Cross section (mm): 50(h) x 22(w)
◆ 11 Lengths available - 30 to 200cm
◆
◆
◆ Strong 1.5mm walls for longer life
◆ Laser-marked vials provide measuringaccuracy of 0.5mm/m for a lifetime
◆ No more double-bubble trouble!
◆ Tube vial offers easy readability
◆ 2% slope markings on horizontal vial (B)
◆ High precision marking on all vials (A)
Anodized aluminium box level
Shock-absorbing rubber end caps
Eurostar Box Level2 VIALS (1 vertical + 1 horizontal)
Level Length(cm)
BM690030E
BM690040E
BM690050E
BM690060E
BM690080E
BM690090E
30
40
50
60
80
90
Eurostar Box Level3 VIALS (2 vertical + 1 horizontal)
(A) High
precision
reading
(B) 2%
slope/
fall line
TheOriginal!
Patented laser-marked vials+ reflection-free readability!
Level Length(cm)
BM690030EM
BM690040EM
BM690050EM
BM690060EM
BM690080EM
BM690090EM
30
40
50
60
80
90
Level Length(cm)
BM690120EM
BM690150EM
BM690180EM
120
150
180
BMI EUROSTAR MAGNETICANODIZED ALUMINIUM SPIRIT LEVEL
Eurostar MagneticBox Level2 VIALS (1 vertical + 1 horizontal)
Eurostar MagneticBox Level3 VIALS (2 vertical + 1 horizontal)
Magnetic
No moredouble-bubbletrouble!
BM4261001030
BM4261001030M
1 mm
Graduation
ABS plastic
Case
Stainless steel
TapeLength(M)
As above with magnet
◆
BMI PICORULE AND LEVEL ALL IN ONE TOOL
BMI 25cm TORPEDOABS PLASTIC SPIRIT LEVEL
◆
◆
◆
◆
Reinforced glassfibre ABS plastic
Length 25cm
◆ Accuracy of level: 1.0mm/m
◆
◆
◆
◆ Rule dimensions: 1M x 19mm (w)
◆
◆
◆
Perfect measuring tool, as horizontal/vertical
measurements are mainly combined with
length measurements
Case dimensions (mm):
62(l) x 52(h) x 25(w)
Stainless steel rule
Perfect reading by convex arch
Waterproof
◆ Accuracy of tape: EEC class II
The rule can be fixed elongated inthe case for measurements
BMI 20cm ULTRASONICALUMINIUM SUPERTORPEDO LEVEL
BMI 25cm TORPEDOALUMINIUM DIE-CAST SPIRIT LEVEL
◆
◆
◆
◆ Product Code:BM689025TM-TA + TOOLBAG
◆
Length 25cm
Milled surface
◆
◆
◆ Product Code: BM692020M
◆
◆ Ideal for tradesmen
◆
◆
◆
◆
Anodised surface - aluminium super torpedo
Length 20cm
Optimal reading for ertical head vial
Accuracy of 0.5mm/m also for inverted measurement
Magnetic
◆ Wall thickness 1.8mm
Edgeless horizontal vial with magnifying effectand markings for 2% slope
Aluminium die-cast
Accuracy of 0.5mm/m
BM685025003
BM685025003M
ABS Torpedo
ABS Torpedowith magnets
Description
Dimensions (mm): 43(h) x 22(w)
2 round vials - good readability
Available with 2 strong magnets
Withpracticaltoolbag
Specialfeatures
Can be bought with beltbag
Magnetic
(A) High
precision
reading
(B) 2%
slope/
fall line
Quality measuring instruments
BMI Laser TechnologyBMI laser systems are suitablefor a wide range of measuring
The laser beam replaces thelevelling line for:
Determine right angles withoutother tools and auxiliary
constructions when:
◆ Checking the smoothness of walls and other surfaces
◆ Setting alignments
◆ Projecting slopes and gradients
◆ Checking angles of fabrications and steelwork
◆ Installing floors and platforms
◆ Installing partitions
◆ Marking the upper
line of tiled areas
◆ Marking the correct
height of electrical
outlets and switches
◆ Installing ceilings
◆
◆ Mounting conductor rails
◆ Installing ceiling lighting
Installing fittings for ceiling panels
◆
◆ Ensuring the correct horizontal alignmentof tiles
◆ Mounting advertising billboards
Hanging up posters and pictures
Save time-consuming measurementsin the horizontal plane when:
The line laser replaces the snap linewhen:
Replace the traditional plumb line todetermine vertical references fromthe floor to the ceiling when:
Save time-consuming measurementsin the vertical plane when:
◆
◆ Installing display
windows
◆ Installing partitions
Establishing tiling
columns
elp you do all the following …
Description
BM654KLPP-SER AutoCROSS 3 Self-levelingcrossline laser+ 30M Receiver
red diode, wavelength 635mmlaser class 2fully automatic (pendulum)+/- 4º+/- 3mm / 10Mminimum 30M3 x 1.5V batteries type AALRS (supplied)blinking laser lens1/4”120(h) x 95(l) x 62(w)
Technical dataLaser typeOutputLevellingSelf-levelling rangeAccuracyRange with receiverPower supplyOut of level indicatorTripod connection sizeDimensions (mm)
Adaptor1/4” and 5/8”magnets, tripod115(h) x 65(l) x 40(w)
Technical dataTripod connection sizeFasteningDimensions (mm)
BM654KLPP AutoCROSS 3 Self-leveling crossline+ 5 beam laser
plumb line(carpentry)
markings forfloors, electrical...
...and drop ceilings
cross line toalign tiles etc.
◆ Plumb beam, up and down
◆
◆
◆ Multifunctional adaptor with magnetsand tripod connection threads 1/4” and 5/8”
◆ Laser glasses
◆ 5 laser beams at a time
Self-levelling 5 beam and crossline-laser
◆ Horizontal and vertical lines can be switched on separately
◆
◆ Supplied in case including batteries
◆ Can also be used with receiver by pulsed laserdiodes
◆ Very good visible laserlinesby super-lighting power
◆ An aperture angle of 140º verticaland 120º horizontal gives youextraordinary line lengths
Self-levelling crossline-laser
BMI autoMAGICLASER MEASURING TECHNOLOGY
BMI autoCROSS 3LASER MEASURING TECHNOLOGY
Supplied in hard plastic case including batteries,laser target card andcarry bag
Description
BM654KLP5SP-SET AutoMAGIC Self-leveling crossline+ 5 beam laser+ 50M Receiver
red diode, wavelength 635mmlaser class 2fully automatic (motor function)+/- 3mm / 10Mminimum 50M3 x 1.5V batteries type AALRS (supplied)1/4”115(h) x 115(l) x 75(w)dustproof, dirt-proof and waterproof
Technical dataLaser typeOutputLevellingAccuracyRange with receiverPower supplyTripod connection sizeDimensions (mm)Casing
Adaptor1/4” and 5/8”magnets, straps, tripod105(h) x 53(l) x 60(w)0.9
Technical dataTripod connection sizeFasteningDimensions (mm)Set weight (kg)
BM654KLP5SP AutoMAGIC Self-leveling crossline+ 5 beam laser
Self-levellingmechanismeliminates set-uptime and guaranteesaccuracy by usinga magneticallysubdued pendulum
Automaticout-of-levelsensingby blinking laser beamsubdued pendulum
Locked lineangleout of self-levellingmode and lock linein place allowing youto set unit at any angle
plumb lineup and down
90° angle dot relays
markings forfloors, electrical...
...and drop ceilings
cross line toalign tiles etc.
50M
30M
Self-levelling mechanism...
Automatic out-of-level sensing...
Locked line angle...
Multipurpose attachment accessorywith strong magnets, tripod connectionsallow to use the instrument also on tripods
Tape features
Measurement commencement approx 10cm after end fitting
FLEXTOP tip made of transparent, highly-flexible plastic; prevents breakageat the tape commencements. Pull ring made of break-proof plastic
Graduation lay-out (mm / inch)
The FLEXTOP tipprevents breakageat the tapeCommencement
Handle locks intoframe
Quality measuring instruments
BMI Framed Long Tapes
BMI Pocket Tapes
BMI Folding Rules
BMI ERGOLINEALUMINIUM FRAMED LONG TAPES
BM305015020AF
BM305025030AF
BM305045050AF
BM305045100AF
1/2
1/2
3/4
3/4
Size
20
30
50
100
Length(M) Profile
Ball bearings resistantto wear
Ergonomic handledesign
Park position for tapecommencement ring
Aluminiumcase
BM305025030AF
Replacement tapes (without frames) are also available upon request
Right or left hand operation
ISOLAN yellow enamelled steel tape - Polyamide coating
TapeQuality:
SteelYellow enamelledPrinted graduationPolyamide coating“ISOLAN”
Characteristics
Stainless **Acid-proof *Unbreakable/flexible **Resistant to wear ***Readability ***
Tape
Recom
mended U
sage
5
Se
lec
t T
ap
eC
om
me
nc
em
en
t:
3. As (2) plus hook-ring Measurement commencement (B)
5. Metal commencement with metal ring
TapeQuality:
SteelWhite enamelledPrinted graduation
4. Hook-ring with FLEXTOP tip Measurement commencement (C)
1. For all 13mm steel tapes Pull-ring made of break-proof plastic, 2 notches for weights
2. As (1) plus FLEXTOP tip which is made of transparent highly- flexible plastic - reliably prevents breakage at tape commencements
4
Se
lec
t M
ea
sure
me
nt
Co
mm
en
ce
me
nt:
A. Approx 10cm after end fitting
B. At front
fitting edge
C. At front
ring edge
Right or left hand operation
Park position for tape commencement ring
Handle locks into frame
Slide rings instead of ball bearings
Tape features
Measurement commencement approx 10cm after end fitting
White enamelled steel tape - Printed graduation
FLEXTOP tip made of transparent, highly-flexible plastic; prevents breakageat the tape commencements. Pull ring made of break-proof plastic
Graduation lay-out (mm / inch)
BMI LONG TAPESMADE TO ORDER
BMI BASIC LONG TAPEWITH HIGH IMPACT FRAME
BM501315020AF
BM501315030AF
BM501325050AF
BM5013450100AF
1/2
1/2
3/4
3/4
Size
20
30
50
100
Length(M) Profile
High impactplastic frame
BM501345100AF
Replacement tapes (without frames) are also available upon request
1. cm
2. cm/cm
3. cm/inch
4. mm
5. mm/inch
Se
lec
tF
ram
e/L
en
gth
:
Basic Size 1/2 Length 20M
Basic Size 1/2 Length 30M
Ergoline Size 1/2 Length 20M
Ergoline Size 1/2 Length 30M
Ergoline Size 3/4 Length 50M
Ergoline Size 3/4 Length 100M
Basic Size 3/4 Length 50M
Basic Size 3/4 Length 100M
Se
lec
t G
rad
ua
tio
nLa
you
t:
1
2
3
0 commencement
Standard
Standard
Standard
* ** *** Limited use Good for use Best suited for
Characteristics
Stainless *Acid-proof
Unbreakable/flexible *Resistant to wear **Readability ***
BM405341
BM405351
3
3
mm
mm/inch
GraduationLength(M)
Unbreakable Use as ruler
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
Unbreakable and durable
Compact, lightweight and handy
Water-resistant
Rust-free stainless steel tape -white enamelled
It rolls out on its own!
Accuracy to EC class ll
Ideal for drawing straight lines -perfect for use as a ruler
Lies completely flat -allowing precise measuring
Length 2M and 3M tape x 16mm(w)
First of its kindanywhere in the world
BMImeter2-in-1 TAPE MEASURE & RULER
BMI PICORULE AND LEVEL ALL IN ONE TOOL
◆ Accuracy of level: 1.0mm/m
◆
◆
◆
◆ Rule dimensions: 1M x 19mm(w)
◆
◆
◆
Perfect measuring tool, as horizontal/vertical
measurements are mainly combined with
length measurements
Case dimensions (mm):
62(l) x 52(h) x 25(w)
Stainless steel rule
Perfect reading by convex arch
Waterproof
◆ Accuracy of tape: EEC class II
The rule can be fixed elongated inthe case for measurements BM4261001030
BM4261001030M
1 mm
Graduation
ABS plastic
Case
Stainless steel
TapeLength(M)
BMI VISO 3-IN-1MULTI-MEASURING POCKET TAPE
◆ 3 function measuring tape:Longitudinal - Internal - Circles
◆ Accuracy of tape:EEC class II
◆ Tape width 16mm
◆ Case dimensions (mm):65(l) x 65(h) x 25(w)
◆
◆ Tough and durable Polyamide case
The steel stylus integrated inthe swing-out arm allows6M radii to be drawn
BMI VARIO RSTAINLESS STEEL POCKET TAPE
◆
◆
◆ Ergonomically shaped high-impact ABS plastic case
◆
◆
◆
3M case dimensions (mm):60(l) x 58(h) x 19(w)
Rust proof stainless steel tape
BM401343
BM401543
3
5
mm
mm/inch
Graduation
Stainless steel
Stainless steel
TapeLength(M)
5M case dimensions (mm):75(l) x 70(h) x 26(w)
◆ Accuracy of tape:EEC class II
3M tape width 13mm5M tape width 16mm
5M tape with carrying strap
As above with magnet
TheQuickie!
BM429251021
BM429351021
2
3
mm
mm
Graduation
Stainless steel
Stainless steel
TapeLength(M)
Waterproof
Tapeand rulerin one!
BeltClip
◆ Scale from special aluminium
◆ Red digits right to left reading
◆
◆
◆ Riveted joint - precision-latched galvanized steel springs
◆ Digits and graduations deep etched in the anodized coat -anti-abrasive and withstands chemicals, grease and oil
◆ Section thickness 1.4mm
◆ Section height 14mm
◆
◆ Folding 2M rule - 10 sections
Heat and chemical resistant
EC accuracy class ll
Black digits left to right reading
◆ Scale from special aluminium
◆
BMI METAL FOLDING RULE
◆
◆ Riveted joint - precision-latched galvanized steel springs
◆ Digits and graduations deep etched in the anodized coat -anti-abrasive and withstands chemicals, grease and oil
◆ Section thickness 1.4mm
◆ Section height 14mm
◆
◆
10
10
10
10
Sections
Metal
Metal
Metal
Metal
Material
Folding 1 and 2M rules - 10 sections
◆
◆ Degree scale on joint of first rule section
◆ Joints with permanent greasing
◆ EC accuracy class lll
◆ Riveted brass-plated strong spring joint -gives rule a long life, good handling andpermanent dimensional accuracy
◆
◆
◆
◆
◆ Strong quality beechwood
Duplex graduation
Folding 2M rule - 10 sections
Section height 16mm
Section thickness 3mm
◆ Joints with permanent greasing
BMI WOODEN FOLDING RULE
◆ EC accuracy class lll
◆ Riveted brass-plated strong spring joint - gives rule a long life,good handling and permanent dimensional accuracy
◆
◆
◆
◆
◆ Strong quality beechwood
BM977-908200 2 mm
Graduation
10
Sections
Wooden
MaterialLength(M)
Alternates white to yellow every 100mm
Folding 2M rule - 10 sections
BMI WOODEN FOLDING RULEWITH ANGLE SCALE
BM976-907200 2 mm
Graduation
10
Sections
Wooden
MaterialLength(M)
Heat and chemical resistant
EC accuracy class ll
Graduation either metric or inch
BM961-100-44S
BM961-100-45S
BM96-100-44S
BM96-100-45S
1
1
2
2
mm
mm/Inch
mm
mm/Inch
GraduationLength(M)
◆
BMI DUAL READINGMETAL FOLDING RULE
Dual reading rule
BM961-2000-94W 2 mm
Graduation
10
Sections
Metal
MaterialLength(M)
Suitablefor left-handers
Section height 16mm
Section thickness 3mm
The internal joints allow a continuous straight edge when unfolded