BM COMPACT GUI DED WAVE GW SERI ES · BM COMPACT GUI DED WAVE –GW SERI ES GUIDE WAVE GW51 ... A...
Transcript of BM COMPACT GUI DED WAVE GW SERI ES · BM COMPACT GUI DED WAVE –GW SERI ES GUIDE WAVE GW51 ... A...
GUIDED WAVE RADAR LEVEL INSTRUMENTSDESC RIPTIO N
High-frequency microwave pulses transmitted by the guided wave radarpropagates along the detector component (wire cable or steel bar), and arereflected on the surface of the medium. After reaching the dielectrics to bemeasured, part of the pulse energy is reflected. The time interval betweenthe emission of the pulses and their arrival is proportional to the distance betweenthe surface of the medium and the reference plan of the instrument.
BM COMPACT GUIDED WAVE GW series is supplied with the advancedmicroprocessor EchoDiscovery: it can be used in very different working conditions.
The instruments have a low consumption, it can be installed on metallic ornon metallic tanks. Their use is not harmful to humans or envinronment.
BM_WARE is a software for the configuration and calibration of the units with a PCis available too, it has HART communication protocol and it is used with a standardHART MODEM (mandatory).
BM COMPACT GUIDED WAVE series has a wide range of options aboutthe process connections or detectors. These options make the devicessuitable in different working conditions, such as high temperature, high pressure,etc.
PRO DUC TS OVERWIEV
BM COMPACT GUI DED W AVE – GW SERI ES
GUIDE WAVE GW51GUIDE WAVE GW52 GUIDE WAVE GW53
GUIDE WAVE GW54
GUIDE WAVE GW55 GUIDE WAVE GW56
B.M. Tecnologie Industriali srl – Via Dell'Industria 12 – 35030 Rubano (PD)Tel. +39-049-8841651 – Fax +39-049-8841654
web:www.bmtecnologie.it - e-mail:[email protected]
BM COMPACT GUI DED W AVE
PRODUCTS OVERVIEW
Display :
Ho using s:
Pro c e ss Co nne c tio ns:
HOUSING CODE A B / C D
MATERIAL Plastic Aluminium Alloy
(available also in
Two-Chamber
version)
SS 316L
TYPE E E1 F G H I J K
MATERIAL SS 316L PTFE PP SS 316L
PRESSURE -1…40 bar -1…3
bar
Normal
Pressure
-1…40 bar -1…5 bar -1…40 bar -1…40 bar
TEMPERATURE
in °C
-60..+130 -60..+250 -40..+130 -40..+80 -60..+150 -60..+130 -60..+250 -60..+400
B.M. Tecnologie Industriali srl – Via Dell'Industria 12 – 35030 Rubano (PD)Tel. +39-049-8841651 – Fax +39-049-8841654
web:www.bmtecnologie.it - e-mail:[email protected]
BM COMPACT GUI DED W AVE
PRODUCTS OVERVIEW
Flang e s:
TYPE L M N P
MATERIAL PTFE / PP SS 316L PP – GIMBAL SS 316L – GIMBAL
FEATURES Rust-Proof High Temp /
Pressure
Standard Temp /
Pressure
High Temp /
Standard Pressure
B.M. Tecnologie Industriali srl – Via Dell'Industria 12 – 35030 Rubano (PD)Tel. +39-049-8841651 – Fax +39-049-8841654
web:www.bmtecnologie.it - e-mail:[email protected]
Diagram of loaded resistance, 2 wires versionresistance
Wiring resistance + HART resistance + loaded resistance
Voltage
HART
Resistance
Voltage limit for explosion proof versionTested value
Voltage limit for not-explosion proof versionTested value
TEC HNIC ALDETAILS
GW51 for liquids and solids
Applications:
Level measurement of liquids and solids, suitable for critical enviroments.
Max measurable distance:
Accuracy:
Process connection: Antenna:
Materials: probe:
cable: housing:
Working temperature:
Storage temperature:
Relative umidity: Pressure of
use: Resistance to vibrations:
Interval of measure: Interval
of updating: Resolution of
display: Max loaded
allowable:
Max loaded allow. values
guide: Max loaded side,
values guide:
Supply 2 wires version:
-Input voltages:
-Absorption:
-Ripple allowed: Supply 4
wires version:
-Standard input voltages :
-Absorption: Output signal:
Resolution:
Fixed signal for anomaly:
Resistance 2 wires version:
Resistance 4 wires version:
Integration time:
Cables entry: Weight:
until 32 m
±10 mm
G 1½ A - 1½ NPT
Probe
AISI 316L / PTFE AISI 316L / PTFE
plastic PBT-FR / Aluminium / AISI 316L
-40 ÷250°C
-40 ÷ 80°C
<95%
-1 ÷ 40 bar
mechanical vibrations 10m/s2, 10÷150Hz
~1sec
~1sec 1mm
see diagrams following pages
cable Ø 4mm = 5KN;
pole Ø 6mm = 4NM;
cable Ø 6mm = 30KN
pole Ø 16mm = 30NM
15÷36Vdc
max. 22.5mA
<100Hz, Uss>1V; 100Hz÷10KHz, Uss<10mV
24Vdc ±10%; 230Vac ±10%
max. 22.5mA
2/4 wires 4-20 mA, HART 6μA
20.5mA; 22mA; 3.6mA
see following diagram max 500 ohm
0÷999s, programmable 1x PG 13.5
until 9 kgs (its depend by type of housing and mounting)
BM COMPACT GUI DE W AVE
B.M. Tecnologie Industriali srl – Via Dell'Industria 12 – 35030 Rubano (PD)Tel. +39-049-8841651 – Fax +39-049-8841654
web:www.bmtecnologie.it - e-mail:[email protected]
Cable lenght (m) Cable lenght (m)
Diameter: 12m
Diameter: 9m
Diameter: 6m
Diameter: 3m
TEC HNIC ALDETA ILS GW51 – LO AD A LLO WED
In the measurement of solid substances, the maximum allowed load is determined by thediameter of the tank and the medium level inside of the same one; in thefollowing diagrams max allowed load are represented for some typical materials:thickness cabpermissible loaded le 6 mm.
Cereals Sand
CementGranulate plastic
Cable lenght (m) Cable lenght (m)
Loaded
perm
issib
lew
ith
cable
6
mm
(KN
)
Loaded
perm
issib
lew
ith
cable
6
mm
(KN
)
6m
m(K
N)
Loaded
perm
issib
lew
ith
cable
6
mm
(KN
)
6m
m(K
N)
Loaded
perm
issib
lew
ith
cable
6
mm
(KN
)
6m
m(K
N)
BM COMPACT GUI DE W AVE
B.M. Tecnologie Industriali srl – Via Dell'Industria 12 – 35030 Rubano (PD)Tel. +39-049-8841651 – Fax +39-049-8841654
web:www.bmtecnologie.it - e-mail:[email protected]
Cable lenght (m) Cable lenght (m)
Diameter: 12m
Diameter: 9m
Diameter: 6m
Diameter: 3m
TEC HNIC ALDETA ILS GW51 – LO AD A LLO WED
In the measurement of solid substances, the max allowed load is determined bythe diameter of the tank and the medium level inside of the same one; in thefollowing diagrams allowed load examples are represented maximum for sometypical materials: thickness cable 4mm.
Cereal Sand
CementGranulate plastic
Cable lenght (m) Cable lenght (m)
Loaded
perm
issib
lew
ith
cable
4m
m(K
N)
Loaded
perm
issib
lew
ith
cable
4m
m(K
N)
Loaded
perm
issib
lew
ith
cable
4m
m(K
N)
Loaded
perm
issib
lew
ith
cable
4m
m(K
N)
BM COMPACT GUI DE W AVE
B.M. Tecnologie Industriali srl – Via Dell'Industria 12 – 35030 Rubano (PD)Tel. +39-049-8841651 – Fax +39-049-8841654
web:www.bmtecnologie.it - e-mail:[email protected]
TEC HNIC ALDETAILS G W51Precision
BM COMPACT GUI DE W AVE
Dimensions with AL/316L frame
Dimensions with PBT-FRL frame
Dimensions with AL (2 chambers) frame
Dimensions
B.M. Tecnologie Industriali srl – Via Dell'Industria 12 – 35030 Rubano (PD)Tel. +39-049-8841651 – Fax +39-049-8841654
web:www.bmtecnologie.it - e-mail:[email protected]
ORDERING CODE G W51
P Standard
Type of Detecting Component /Material
A Rope /AISI 316L / PTFE B Rod/ AISI
316L / PTFE
C Rope/ AISI 316L / Lengthen PP D Rod/ AISI 316L /
Lengthen PP
E Rope/ AISI 316L / Lengthen PTFE F
Rod/ AISI 316L / Lengthen PTFE X
Special Type (on request)*
Process Connections
GP Thread G 1½ A KP Thread G 2A
NP Thread 1½ NPT
YP Special Type (on request)*
Retained seal / Working temperature
A Viton / -30…150°C B Kalrez / -
40…250°C
Electronic
B 4…20 mA HART (2 wires)
C 4…20 mA / 22,8…26,4 VDC/ 4 wires**
D 4…20 mA /198…242 VDC HART (4 wires)**
Housing Material / General Protection
B Plastic / IP66
A Aluminium / IP67
D Aluminium (2 chambers) / IP67** G
AISI 316L / IP67
Wiring
M M20x1.5
N ½ NPT
Display / Programming Cable lenght / pole
Enter a Five-Digit value in mm
BM COMPACT GUI DE W AVE
B.M. Tecnologie Industriali srl – Via Dell'Industria 12 – 35030 Rubano (PD)Tel. +39-049-8841651 – Fax +39-049-8841654
web:www.bmtecnologie.it - e-mail:[email protected]
Diagram of loaded resistance, 2 wires version
resistance
Wiring resistance + HART resistance + loaded resistance
Voltage
HART
Resistance
Voltage limit for explosion proof versionTested value
Voltage limit for not- explosion proof versionTested value
TEC HNIC ALDETAILS
GW52 for liquids and solids
Applications:
Level measurement of liquids and solids, suitable for critical enviroments.
Max measurable distance:
Accuracy:
Process connection: Antenna:
Materials: pole:
housing: Working
temperature: Storage
temperature: Relative umidity:
Pressure of use: Resistance
to vibrations: Interval of
measure: Interval of updating:
Resolution of display: Max
loaded allowable:
Max loaded allow. values
guide: Max loaded side,
values guide:
Supply 2 wires version:
-Input voltages:
-Absorption:
-Ripple allowed: Supply 4
wires version:
-Standard input voltages :
-Absorption:
Output signal: Resolution:
Fixed signal for anomaly:
Resistance 2 wires version:
Resistance 4 wires version:
Integration time:
Cables entry: Weight:
until 6 m
±10 mm Flange Rope PTFE
plastic PBT-FR / Aluminium / AISI 316L
-40 ÷150°C
-40 ÷ 80°C
<95%
-1 ÷ 40 bar
mechanical vibrations 10m/s2, 10÷150Hz
~1sec
~1sec 1mm
see diagrams following pages
cable Ø 4mm = 5KN;
pole Ø 6mm = 4NM;
cable Ø 6mm = 30KN
pole Ø 16mm = 30NM
15÷36Vdc
max. 22.5mA
<100Hz, Uss>1V; 100Hz÷10KHz, Uss<10mV
24Vdc ±10%; 230Vac ±10%
max. 22.5mA
2/4 wires 4-20 mA, HART 6μA
20.5mA; 22mA; 3.6mA
see following diagram max 500 ohm
0÷999s, programmable 1x PG 13.5
until 5.5 kgs (its depend by type of housing and
mounting)
BM COMPACT GUI DE W AVE
B.M. Tecnologie Industriali srl – Via Dell'Industria 12 – 35030 Rubano (PD)Tel. +39-049-8841651 – Fax +39-049-8841654
web:www.bmtecnologie.it - e-mail:[email protected]
TEC HNIC ALDETAILS G W52
Precision
DimensionsDimensions with AL/316L
frame
Dimensions with PBT-FRL frame
Dimensions with AL frame (2 chambers)
BM COMPACT GUI DE W AVE
B.M. Tecnologie Industriali srl – Via Dell'Industria 12 – 35030 Rubano (PD)Tel. +39-049-8841651 – Fax +39-049-8841654
web:www.bmtecnologie.it - e-mail:[email protected]
ORDERING CODE G W52
P Standard
Type of Detecting Component/ Material
A Rope/ PTFE
Connection / Material
GP Flange DN50 PN16 AISI 316L (GB/T9119-
2000) NP Flange DN80 PN16 AISI 316L (GB/T9119-
2000) EP Flange DN100 PN16 AISI 316L (GB/T9119-
2000) FP Flange DN150 PN16 AISI 316L (GB/T9119-
2000)
YP Special Connection (on request)*
Retained seal / Working temperature
A PTFE / -30…150°C
Electronic
B 4…20 mA HART (2 wires)
C 4…20 mA / 22,8…26,4 VDC/ HART 4 wires** D 4…20 mA
/ 198…242 VAC / HART (4 wires)**
Housing Material / General Protection
B Plastic / IP66
A Aluminium / IP67
D Aluminium (2 chambers) / IP67** G
AISI 316L / IP67
Wiring
M M20x1.5
N ½ NPT
Display / Programming
A YES
Cable length / pole
Enter a Four-Digit value in mm
BM COMPACT GUI DE W AVE
B.M. Tecnologie Industriali srl – Via Dell'Industria 12 – 35030 Rubano (PD)Tel. +39-049-8841651 – Fax +39-049-8841654
web:www.bmtecnologie.it - e-mail:[email protected]
Diagram of loaded resistance, 2 wires version
resistance
Wiring resistance + HART resistance + loaded resistance
Voltage
HART
Resistance
Voltage limit for explosion proof versionTested value
Voltage limit for not- explosion proof versionTested value
TEC HNIC ALDETA ILS
GW53 for liquids
Applications:
Level measurement of liquids, suitable for those with dielectric low constant, in critical enviroments.
Max measurable distance:
Accuracy:
Process connection: Antenna:
Materials: pole:
housing: Working
temperature: Storage
temperature: Relative umidity:
Pressure of use: Resistance
to vibrations: Interval of
measure: Interval of updating:
Resolution of display: Max
loaded allowable:
Max loaded allow. values
guide: Max loaded side,
values guide:
Supply 2 wires version:
-Input voltages:
-Absorption:
-Ripple allowed: Supply 4
wires version:
-Standard input voltages :
-Absorption:
Output signal: Resolution:
Fixed signal for anomaly:
Resistance 2 wires version:
Resistance 4 wires version:
Integration time:
Cables entry: Weight:
until 6 m
±10 mm
G 1½ A - 1½ NPT
Pole coaxial Ø 28 mm AISI 316L
plastic PBT-FR / Aluminium / AISI 316L
-40 ÷250°C
-40 ÷ 80°C
<95%
-1 ÷ 40 bar
mechanical vibrations 10m/s2, 10÷150Hz
~1sec
~1sec 1mm
see diagrams following pages
cable Ø 4mm = 5KN;
pole Ø 6mm = 4NM;
cable Ø 6mm = 30KN
pole Ø 16mm = 30NM
15÷36Vdc
max. 22.5mA
<100Hz, Uss>1V; 100Hz÷10KHz, Uss<10mV
24Vdc ±10%; 230Vac ±10%
max. 22.5mA
2/4 wires 4-20 mA, HART 6μA
20.5mA; 22mA; 3.6mA
see following diagram max 500 ohm
0÷999s, programmable 1x PG 13.5
until 6 kgs (its depend by type of housing and mounting)
BM COMPACT GUI DE W AVE
B.M. Tecnologie Industriali srl – Via Dell'Industria 12 – 35030 Rubano (PD)Tel. +39-049-8841651 – Fax +39-049-8841654
web:www.bmtecnologie.it - e-mail:[email protected]
TEC HNIC ALDETAILS G W53Precision
DimensionsDimensions with AL/316L frame
Dimensions with PBT-FRL frame
Dimensions with AL frame (2 chambers)
BM COMPACT GUI DE W AVE
B.M. Tecnologie Industriali srl – Via Dell'Industria 12 – 35030 Rubano (PD)Tel. +39-049-8841651 – Fax +39-049-8841654
web:www.bmtecnologie.it - e-mail:[email protected]
O RDERING CODE GW53
P Standard
Type of Detecting Component/ Material
A Coaxial pole Ø 28mm / AISI 316L
Connections / Material GP Thread G 1 ½” A KP
Thread G 2” A
NP Thread G 1 ½” NPT
YP Special Connection (on request)*
Retained seal / Working temperature
A Viton / -30…150°C B
Kalrez / -40…150°C
Electronic
B
C
D
4…20 mA HART (2 wires)
4…20 mA / 22,8…26,4 VDC 4 wires**
4…20 mA / 198…242 VAC / HART (4 wires)**
Housing Material / General Protection
A Aluminium / IP67 B Plastic /
IP66
D Aluminium (2 chambers) / IP67** G
AISI 316L / IP66
Wiring
M M20x1.5
N ½ NPT
Display / Programming
A YES
Rod Length
Enter a Four-Digit value in mm
BM COMPACT GUI DE W AVE
B.M. Tecnologie Industriali srl – Via Dell'Industria 12 – 35030 Rubano (PD)Tel. +39-049-8841651 – Fax +39-049-8841654
web:www.bmtecnologie.it - e-mail:[email protected]
Diagram of loaded resistance, 2 wires versionresistance
Wiring resistance + HART resistance + loaded resistance
Voltage
HART
Resistance
Voltage limit for explosion proof versionTested value
Voltage limit for not-explosion proof versionTested value
TEC HNIC ALDETA ILS
GW54 for liquids
Applications: Level measurement of liquids, suitable for critical enviroments,
to high temperature and high pressure.
BM COMPACT GUI DE W AVE
Max measurable distance:
Accuracy:
Process connection: Antenna:
Materials: pole:
probe: housing:
Working temperature:
Storage temperature:
Relative umidity: Pressure of
use: Resistance to vibrations:
Interval of measure: Interval
of updating: Resolution of
display: Max loaded
allowable:
Max loaded allow. values
guide: Max loaded side,
values guide:
Supply 2 wires version:
-Input voltages:
-Absorption:
-Ripple allowed: Supply 4
wires version:
-Standard input voltages :
-Absorption: Output signal:
Resolution:
Fixed signal for anomaly:
Resistance 2 wires version:
Resistance 4 wires version:
Integration time:
Cables entry: Weight:
until 6 m (pole), until 30 m (probe)
±10 mm
G 1½ A - 1½ NPT
Pole / Probe AISI 316L AISI 316L
plastic PBT-FR / Aluminium / AISI 316L
-40 ÷250°C
-40 ÷ 80°C
<95%
-1 ÷ 40 bar
mechanical vibrations 10m/s2, 10÷150Hz
~1sec
~1sec 1mm
see diagrams following pages
cable Ø 4mm = 5KN;
pole Ø 6mm = 4NM;
cable Ø 6mm = 30KN
pole Ø 16mm = 30NM
15÷36Vdc
max. 22.5mA
<100Hz, Uss>1V; 100Hz÷10KHz, Uss<10mV
24Vdc ±10%; 230Vac ±10%
max. 22.5mA
2/4 wires 4-20 mA, HART 6μA
20.5mA; 22mA; 3.6mA
see following diagram max 500 ohm
0÷999s, programmable 1x PG 13.5
until 12 kgs (its depend by type of housing and mounting)
B.M. Tecnologie Industriali srl – Via Dell'Industria 12 – 35030 Rubano (PD)Tel. +39-049-8841651 – Fax +39-049-8841654
web:www.bmtecnologie.it - e-mail:[email protected]
TEC HNIC ALDETAILS G W54Precision
Dimensions with AL/316L frame
AL/316L
Dimensions with PBT-FRL frame
Dimensions with AL frame (2 chambers)
BM COMPACT GUI DE W AVE
Dimensions
B.M. Tecnologie Industriali srl – Via Dell'Industria 12 – 35030 Rubano (PD)Tel. +39-049-8841651 – Fax +39-049-8841654
web:www.bmtecnologie.it - e-mail:[email protected]
O RDERING CODE GW54
P Standard
Type of Detecting Component / Material
A Rope / AISI 316L / PTFE B Rod
/AISI 316L / PTFE
C Rope / AISI 316L / Lengthen PP D Rod / AISI
316L / Lengthen PP
E Rope / AISI 316L / Lengthen PTFE F Rod / AISI
316L / Lengthen PTFE X Special Type (on request)*
Connections
GP Thread G 1½ A KP
Thread G 2A NP Thread 1½ NPT
Retained seal / Working temperature
A Viton / -30…250°C B
Kalrez / -40…250°C
Electronic
B
C
D
4…20 mA HART (2 wires)
4…20 mA / 22,8…26,4 VDC HART 4 wires**
4…20 mA / 198…242 VAC HART 4 wires**
Housing Material / General Protection
A Aluminium / IP67 B Plastic /
IP66
D Aluminium (2 chambers) / IP67** G
AISI 316L / IP67
Wiring
M M20x1.5
N ½ NPT
Display / Programming
A YES
Cable length / pole
Enter a Five-Digit value in mm
BM COMPACT GUI DE W AVE
B.M. Tecnologie Industriali srl – Via Dell'Industria 12 – 35030 Rubano (PD)Tel. +39-049-8841651 – Fax +39-049-8841654
web:www.bmtecnologie.it - e-mail:[email protected]
Diagram of loaded resistance, 2 wires versionresistance
Wiring resistance + HART resistance + loaded resistance
Voltage
HART
Resistance
Voltage limit for explosion proof versionTested value
Voltage limit for not-explosion proof versionTested value
TEC HNIC ALDETA ILS
GW55 for liquids
Applications: Level measurement in liquids, suitable for critical enviroments,
to high temperature and high pressure.
BM COMPACT GUI DE W AVE
Max measurable distance:
Accuracy:
Process connection: Antenna:
Materials: pole:
probe: housing:
Working temperature:
Storage temperature:
Relative umidity: Pressure of
use: Resistance to vibrations:
Interval of measure: Interval
of updating: Resolution of
display: Max loaded
allowable:
Max loaded allow. values
guide: Max loaded side,
values guide:
Supply 2 wires version:
-Input voltages:
-Absorption:
-Ripple allowed: Supply 4
wires version:
-Standard input voltages :
-Absorption: Output signal:
Resolution:
Fixed signal for anomaly:
Resistance 2 wires version:
Resistance 4 wires version:
Integration time:
Cables entry: Weight:
until 6 m (pole), until 30 m (probe)
±10 mm
G 1½ A - 1½ NPT
Pole / Probe
AISI 316L / Ceramic AISI 316L / Ceramic
plastic PBT-FR / Aluminium / AISI 316L
-200 ÷400°C
-40 ÷ 80°C
<95%
-1 ÷ 40 bar
mechanical vibrations 10m/s2, 10÷150Hz
~1sec
~1sec 1mm
see diagrams following pages
cable Ø 4mm = 5KN;
pole Ø 6mm = 4NM;
cable Ø 6mm = 30KN
pole Ø 16mm = 30NM
15÷36Vdc
max. 22.5mA
<100Hz, Uss>1V; 100Hz÷10KHz, Uss<10mV
24Vdc ±10%; 230Vac ±10%
max. 22.5mA
2/4 wires 4-20 mA, HART 6μA
20.5mA; 22mA; 3.6mA
see following diagram max 500 ohm
0÷999s, programmable 1x PG 13.5
until 9 kgs (its depend by type of housing and mounting)
B.M. Tecnologie Industriali srl – Via Dell'Industria 12 – 35030 Rubano (PD)Tel. +39-049-8841651 – Fax +39-049-8841654
web:www.bmtecnologie.it - e-mail:[email protected]
TEC HNIC ALDETAILS G W55Precision
BM COMPACT GUI DE W AVE
Dimensions
Dimensions with AL/316L frameAL/316L
Dimensions with PBT-FRL frame
Dimensions with AL frame (2 chambers)
B.M. Tecnologie Industriali srl – Via Dell'Industria 12 – 35030 Rubano (PD)Tel. +39-049-8841651 – Fax +39-049-8841654
web:www.bmtecnologie.it - e-mail:[email protected]
O RDERING CODE GW55
P Standard
Type od Detecting Component / Material
A Rope/ AISI 316L / Ceramic B Rod /AISI 316L / Ceramic
Connections
GP Thread G 1½ A KP Thread G 2A NP
Thread 1½ NPT
YP Special Connection (on request)*
Electronic
B 4…20 mA HART(2wires)
C 4…20 mA / 22,8…26,4 VDC HART 4 wires**
D 4…20 mA / 198…242 VAC HART 4 wires** Housing Material /
General Protection B Plastic / IP66
A Aluminium / IP67
D Aluminium (2 chambers) / IP67** G AISI 316L /
IP67
Working temperature
A -200….400°C
Wiring
M M20x1.5 N ½ NPT
Display / Programming
A YES
Cable length / pole
Enter a Five-Digit value in mm
BM COMPACT GUI DE W AVE
B.M. Tecnologie Industriali srl – Via Dell'Industria 12 – 35030 Rubano (PD)Tel. +39-049-8841651 – Fax +39-049-8841654
web:www.bmtecnologie.it - e-mail:[email protected]
Diagram of loaded resistance, 2 wires versionresistance
Wiring resistance + HART resistance + loaded resistance
Voltage
HART
Resistance
Voltage limit for explosion proof versionTested value
Voltage limit for not- explosion proof versionTested value
TEC HNIC ALDETA ILS
GW56 for liquids and dust
Applications: Level measurement in liquids, suitable for critical enviroments,
with dielectric low constant.
BM COMPACT GUI DE W AVE
Max measurable distance:
Accuracy:
Process connection: Antenna:
Materials: pole:
probe: housing:
Working temperature:
Storage temperature:
Relative umidity: Pressure of
use: Resistance to vibrations:
Interval of measure: Interval
of updating: Resolution of
display: Max loaded
allowable:
Max loaded allow. values
guide: Max loaded side,
values guide:
Supply 2 wires version:
-Input voltages:
-Absorption:
-Ripple allowed: Supply 4
wires version:
-Standard input voltages :
-Absorption: Output signal:
Resolution:
Fixed signal for anomaly:
Resistance 2 wires version:
Resistance 4 wires version:
Integration time:
Cables entry: Weight:
until 6 m (pole), until 30 m (probe)
±10 mm
G 1½ A - 1½ NPT
Pole / Probe
AISI 316L / PTFE AISI 316L / PTFE
plastic PBT-FR / Aluminium / AISI 316L
-40 ÷250°C
-40 ÷ 80°C
<95%
-1 ÷ 40 bar
mechanical vibrations 10m/s2, 10÷150Hz
~1sec
~1sec 1mm
see diagrams following pages
cable Ø 4mm = 5KN;
pole Ø 6mm = 4NM;
cable Ø 6mm = 30KN
pole Ø 16mm = 30NM
15÷36Vdc
max. 22.5mA
<100Hz, Uss>1V; 100Hz÷10KHz, Uss<10mV
24Vdc ±10%; 230Vac ±10%
max. 22.5mA
2/4 wires 4-20 mA, HART 6μA
20.5mA; 22mA; 3.6mA
see following diagram max 500 ohm
0÷999s, programmable 1x PG 13.5
until 9 kgs (its depend by type of housing and mounting)
B.M. Tecnologie Industriali srl – Via Dell'Industria 12 – 35030 Rubano (PD)Tel. +39-049-8841651 – Fax +39-049-8841654
web:www.bmtecnologie.it - e-mail:[email protected]
TEC HNIC ALDETAILS G W56Precision
BM COMPACT GUI DE W AVE
Dimensions
Dimensions with AL/316L frameAL/316L
Dimensions with PBT-FRL frame
Dimensions with AL frame (2 chambers)
B.M. Tecnologie Industriali srl – Via Dell'Industria 12 – 35030 Rubano (PD)Tel. +39-049-8841651 – Fax +39-049-8841654
web:www.bmtecnologie.it - e-mail:[email protected]
O RDERING CODE GW56
P Standard
Type of Detecting Component / Material
A 2-Rope / AISI 316L / PTFE B 2-Rod / AISI 316L /
PTFE
Connections / Material
GP Thread G 1½ A AISI 316L KP Thread G 2A AISI
316L NP Thread 1½ NPT AISI 316L
YP Specail Connection (on request)*
Electronic
B 4…20 mA HART (2 wires)
C 4…20 mA / 22,8…26,4 VDC HART 4 wires** D
4…20 mA / 198…242 VAC / HART 4 wires**
Retained seal / Working temperature
A Viton / -30…150°C B Kalrez / -40…250°C
Housing Material / General Protection
A.Aluminium / IP67
B.Plastic / IP66
D Aluminium (2 chambers) / IP67** G
AISI 316L / IP67
Wiring
M M20x1.5
N ½ NPT
Display / Programming
A YES
Cable length / pole
Enter a Five-Digit value in mm
BM COMPACT GUI DE W AVE
B.M. Tecnologie Industriali srl – Via Dell'Industria 12 – 35030 Rubano (PD)Tel. +39-049-8841651 – Fax +39-049-8841654
web:www.bmtecnologie.it - e-mail:[email protected]