Blaupunkt Essen Mp35 manual

Radio / CD / MP3

http://www.blaupunkt.com

Brighton MP35 7 645 160 510Essen MP35 7 645 150 510

Operating instructions

26

91011

3

2

7

4

8

51

29

DANS

KEN

GLI

SHDE

UTSC

HFR

ANA

ISIT

ALIA

NONE

DERL

ANDS

SVEN

SKA

ESPA

OL

PORT

UGU

S

CONTROLS1 Button to switch the device on/

off and operate the volume mutefunction.

2 SRC buttonShort press: Switch sources be-tween CD/MP3, CD changer (ifconnected) and AUX.Long press: Briefly display theclock time.

3 button to eject a CD from thedevice.

4 Volume control5 CD compartment6 TRAF RDS button

Short press: Switch traffic-infor-mation standby on/off.Long press: Switch the RDSfunction on/off.

7 Arrow buttons8 MENU button

Short press: Open the settingsmenu.Long press: Start the scan func-tion.

9 AUDIO button to adjust thebass, treble, balance and fader.To select an equalizer preset.To activate, deactivate and ad-just the X-BASS function.

: Keys 1 - 6

; BNDTS buttonShort press: Select the FMmemory banks and the MW andLW wavebands (MW/LW only onthe Brighton MP35).Long press: Start the Travelstorefunction.

30

CONTENTS

Notes and accessories .......... 31

Switching on/off .................... 32

Adjusting the volume ............. 33Setting the power-on volume ......... 33Quick volume reduction (mute) ..... 33Switching the confirmation beepon/off ............................................ 34Mute while telephoning ................. 34

Radio mode............................ 34Adjusting the tuner settings ........... 34Switching to radio mode ............... 35RDS functions ............................... 35Selecting the waveband /memory bank ................................ 35Tuning into a station ...................... 35Setting the sensitivity of stationseek tuning ................................... 36Storing stations ............................. 36Storing stations automatically(Travelstore) .................................. 36Listening to stored stations ........... 37Scanning receivable stations(SCAN) ......................................... 37Setting the scanning time .............. 37Programme type (PTY) ................. 37Optimising radio reception ............ 39Configuring the display ................. 39

Traffic information ................. 40

CD mode ................................ 41Switching to CD mode.................. 41Selecting tracks ............................ 41Fast track selection ....................... 41Fast searching (audible) ................ 41Random track play (MIX) ............... 42Scanning tracks (SCAN) .............. 42Repeating tracks (REPEAT) .......... 42Pausing playback (PAUSE) ........... 42Configuring the display ................. 42

Displaying CD text ........................ 43Traffic announcements in CD mode . 43Ejecting a CD ............................... 43

MP3 mode .............................. 44Preparing an MP3-CD .................. 44Switching to MP3 mode ................ 45Configuring the display ................. 45Selecting a directory ..................... 46Selecting tracks/files ..................... 46Fast searching .............................. 46Random track play (MIX) ............... 46Scanning tracks (SCAN) .............. 47Repeating individual tracks orwhole directories (REPEAT) .......... 47Pausing playback (PAUSE) ........... 47

CD-changer mode ................. 48Switching to CD-changer mode .... 48Selecting CDs .............................. 48Selecting tracks ............................ 48Fast searching (audible) ................ 48Configuring the display ................. 48Repeating individual tracks orwhole CDs (REPEAT) ................... 48Random track play (MIX) ............... 49Scanning all the tracks on all theCDs (SCAN) ................................ 49Pausing playback (PAUSE) ........... 49

CLOCK time ........................... 50

Sound..................................... 51

X-BASS .................................. 52

Configuring the level display . 53

External audio sources .......... 53

Specifications ........................ 54

31

DANS

KEN

GLI

SHDE

UTSC

HFR

ANA

ISIT

ALIA

NONE

DERL

ANDS

SVEN

SKA

ESPA

OL

PORT

UGU

S

Notes and accessoriesThank you for choosing a Blaupunktproduct. We hope you enjoy using thisnew piece of equipment.Please read these operating instruc-tions before using the equipment forthe first time.The Blaupunkt editors are constantlyworking on making the operating in-structions clearer and easier to under-stand. However, if you still have anyquestions on how to operate the device,please contact your dealer or the tele-phone hotline for your country. You willfind the telephone number printed at theback of this booklet.We provide a manufacturer guaranteeon our products bought within the Eu-ropean Union. You can view the guar-antee conditions at www.blaupunkt.deor ask for them directly at:Blaupunkt GmbHHotlineRobert Bosch Str. 200D-31139 HildesheimGerrmany

NOTES AND ACCESSORIES

Road safety Road safety has absolute prior-

ity. Only operate your car sound sys-tem if the road and traffic conditionsallow you to do so. Familiarise your-self with the device before setting offon your journey.You must always be able to hearpolice, fire service and ambulancesirens in good time from inside yourvehicle. For this reason, listen to yourcar sound system at a moderate vol-ume level during your journey.

InstallationIf you want to install your car sound sys-tem yourself, please read the installa-tion and connection instructions thatfollow these operating instructions.

AccessoriesOnly use accessories approved by Blau-punkt.Remote controlThe RC 08 or RC 10 (available as op-tional accessories) remote control al-lows you to access the most importantfunctions of your car sound system safe-ly and conveniently from your steeringwheel.You cannot switch the device on/off us-ing the remote control.AmplifiersYou can use all Blaupunkt and Velocityamplifiers.CD changersYou can connect the following BlaupunktCD changers: CDC A 08, IDC A 09 andCDC A 03.

02Brighton_EssenMP35 gb 28.06.2005, 11:15 Uhr31

32

Note: If the vehicle ignition was switched

off before you inserted the CD, youwill first have to switch on the de-vice by pressing button 1 in orderto start playing the CD.

Switching on/offYou can switch the device on/off in thefollowing ways:Switching on/off using the vehicleignitionIf the device is correctly connected tothe vehicles ignition and it was notswitched off using button 1, it willswitch on/off simultaneously with theignition.Switching on/off using button 1

To switch on the device, press but-ton 1.

To switch off the device, press andhold down button 1 for longerthan two seconds.

The device switches off.Note: To protect the vehicle battery, the

device will switch off automaticallyafter one hour if the ignition is off.

Switching on by inserting a CDIf the device is switched off and there isno CD present in the drive, gently push the CD with its printed

side uppermost into the drive 5until you feel some resistance.

The drive draws in the CD automatical-ly.You must not hinder or assist the driveas it draws in the CD.The device switches on and starts play-ing the CD.

SWITCHING ON/OFF

33

DANS

KEN

GLI

SHDE

UTSC

HFR

ANA

ISIT

ALIA

NONE

DERL

ANDS

SVEN

SKA

ESPA

OL

PORT

UGU

S

Adjusting the volumeYou can adjust the volume in steps from0 (off) to 66 (maximum).To increase the volume, turn the volume control 4 clock-

wise.To decrease the volume, turn the volume control 4 anti-

clockwise.

Setting the power-on volume

Note: The device is equipped with a time-

out function. If, for instance, youpress the MENU button 8 and se-lect a menu item, the device willswitch back approx. 8 seconds af-ter the last button was pressed.Any changes to the settings thatyou have made will be saved.

You can set the power-on volume. Press the MENU button 8. Press the or button 7 repeat-

edly until ON VOLUME appearsin the display.

Adjust the power-on volume usingthe buttons 7.

To help you adjust the setting more eas-ily, the device will increase or decreasethe volume as you make your changes.If you change the setting to LAST VOL,the volume level that was set the lasttime you switched off the device will beactivated again.

Note: To protect your hearing, the power-

on volume is limited to a value of38. If the volume level was higherthan this when the device was lastswitched off and the LAST VOLsetting is activated, the system willreset the volume to 38 when youswitch the device on again.

When you have finished adjusting thesetting, press the MENU button 8 twice.

Quick volume reduction (mute)You can quickly decrease the volume(mute) to a level preset by you. Briefly press button 1.MUTE appears in the display.Cancelling muteTo return to your previously set volumelevel, briefly press button 1 again.Setting the mute levelYou can adjust the mute level. Press the MENU button 8. Press the or button 7 repeat-

edly until MUTE LVL appears inthe display.

Adjust the mute level using the buttons 7.


ADJUSTING THE VOLUME

34

Switching the confirmation beepon/offThe system will play a confirmation beepfor some functions if you keep a buttonpressed down for longer than two sec-onds, for instance, when you assign aradio station to a station button. You canswitch the beep on/off. Press the MENU button 8. Press the or button 7 repeat-

edly until BEEP ON or BEEPOFF appears in the display.

Adjust the beep setting using the buttons 7. OFF means the

beep is switched off and ONmeans the beep is switched on.

When you have finished adjusting thesetting, press the MENU button 8.

Mute while telephoningIf your device is connected to a mobiletelephone, the car radios volume willbe muted as soon as you pick up thetelephone. This requires that the mo-bile telephone be connected to the de-vice as described in the installation in-structions.PHONE appears in the display.

ADJUSTING THE VOLUME

Radio modeThis device is equipped with an RDSradio receiver. Many of the receivableFM stations broadcast a signal that notonly carries the programme but alsoadditional information such as the sta-tion name and programme type (PTY).The station name appears in the dis-play as soon as the tuner receives it.

Adjusting the tuner settingsTo ensure that the tuner works proper-ly, the device must be configured for theregion in which you are using it. You canchoose between Europe (EUROPE),United States (USA), South America (S-AMERICA) and Thailand (THAI). Bydefault, the tuner is set to the region inwhich the device was sold. If you en-counter problems with radio reception,please check this setting.The radio functions described in theseoperating instructions refer to the EU-ROPE tuner setting. Press and hold down the 1 and 5

buttons : simultaneously andswitch on the device again bypressing button 1.

TUNER is displayed. Select your tuner region using the

or button 7.To save the setting, switch the device off and on again

or wait approx. 8 seconds. The carsound system starts with the lastsetting activated (radio, CD/MP3,CD changer or AUX).

RADIO MODE

35

DANS

KEN

GLI

SHDE

UTSC

HFR

ANA

ISIT

ALIA

NONE

DERL

ANDS

SVEN

SKA

ESPA

OL

PORT

UGU

S

Switching to radio modeIf you are in CD/MP3, CD-changer orAUX mode, press the BNDTS button ;or

press the SRC button 2 re-peatedly until the memory bank(e.g. FM1) appears in the display.

RDS functionsThe convenient RDS functions AF (Al-ternative Frequency) and REGIONALextend your radios range of functions. AF: If the RDS function is activat-

ed, the radio automatically tunesinto the best receivable frequencyfor the station that is currently set.

REGIONAL: At certain times, someradio stations divide their pro-gramme into regional programmesproviding different content. You canuse the REG function to preventthe car radio from switching to al-ternative frequencies that arebroadcasting different programmecontent.

Note: REGIONAL must be activated/de-

activated separately in the menu.Switching the RDS function on/offIf you want to use the RDS functions(AF and REGIONAL), press and hold down the TRAF

RDS button 6 for longer than twoseconds.

The RDS function is active when anRDS symbol lights up in the display.

Switching REGIONAL on/off

Press the MENU button 8. Press the or button 7 repeat-

edly until REG appears in the dis-play. OFF or ON is displayedalongside REG.

To switch REGIONAL on/off, pressthe or button 7.

Press the MENU button 8.

Selecting the waveband /memory bankThis device can receive programmesbroadcast over the FM frequency rangeas well as the MW and LW (AM) wave-bands (MW and LW only on the Bright-on MP35). There are three memorybanks available for the FM waveband(FM1, FM2 and FMT) and one for eachof the MW and LW wavebands. Six sta-tions can be stored in each memorybank.To switch between the FM memorybanks (FM1, FM2 and FMT) and theMW and LW wavebands, briefly press the BNDTS button;.

Tuning into a stationThere are various ways of tuning into astation.

Automatic station seek tuning

Press the or button 7.The radio tunes into the next receiva-ble station.

RADIO MODE

36

Tuning into stations manuallyYou can also tune into stations manual-ly.Note: You can only tune into stations

manually if the RDS function is de-activated.

Press the or button 7.

Browsing through broadcastingnetworks (only FM)If radio stations provide several pro-grammes, you have the option of brows-ing through their broadcasting net-works.

Note: The RDS function must be activat-

ed before you can use this feature. Press the or button 7 to

switch to the next station on thebroadcasting network.

Note: When using this feature, you will

only be able to switch to stationsthat you have received once beforealready. To receive the stations,use the scan function or the Travel-store function.

Setting the sensitivity of stationseek tuningYou can choose whether the radioshould only tune into stations providinggood reception or whether it can alsotune into those with a weak reception. Press the MENU button 8.

Press the or button 7 repeat-edly until SENS and the currentlyset value appear in the display.

SENS HI6 means that the tuner is setto the highest sensitivity setting. SENSLO1 means it is set to the lowest sen-sitivity setting. Set the desired sensitivity using the

buttons 7.When you have finished adjusting thesetting, press the MENU button 8.Note: You can set different sensitivity

levels for FM and MW or LW (AM)(MW/LW only on the BrightonMP35).

Storing stations

Storing stations manually

Select the memory bank that youwant (FM1, FM2, FMT) or one ofthe wavebands (MW or LW) (MW/LW only on the Brighton MP35).

Tune into the station that you want. Press and hold down one of the

station buttons 1 - 6 : for longerthan two seconds to assign the sta-tion to that button.

Storing stations automatically(Travelstore)You can automatically store the six sta-tions providing the best reception in theregion (only FM). The stations are storedin the FMT memory bank.

RADIO MODE

37

DANS

KEN

GLI

SHDE

UTSC

HFR

ANA

ISIT

ALIA

NONE

DERL

ANDS

SVEN

SKA

ESPA

OL

PORT

UGU

S

Note: Any stations previously stored in

this memory bank are deleted inthe process.

Press and hold down the BNDTSbutton ; for longer than two sec-onds.

The storing procedure begins. FMTSTORE appears in the display. Afterthe process has completed, the radiowill play the station that is stored inmemory location 1 of the FMT memorybank.

Listening to stored stations Select the memory bank or wave-

band. Press the station button 1 - 6 :

that corresponds to the station thatyou want to listen to.

Scanning receivable stations(SCAN)You can use the scan function to listento all the receivable stations briefly. Youcan set the scanning time in the menuto between 5 and 30 seconds (in stepsof 5 seconds).Starting SCAN

Press and hold down the MENUbutton 8 for longer than two sec-onds.

Scanning begins. SCAN appearsbriefly in the display followed by a flash-ing display of the current station nameor frequency.

Cancelling SCAN and continuinglistening to a station

Press the MENU button 8.Scanning stops and the radio continuesplaying the station that it tuned into last.

Setting the scanning time Press the MENU button 8. Press the or button 7 repeat-

edly until SCAN TIME appears inthe display.

Set the desired scanning time us-ing the buttons 7.

When you have finished adjusting thesetting, press the MENU button 8 twice.Note: The scanning time that you set is

also used when scanning in CD/MP3 mode and in CD-changermode.

Programme type (PTY)Besides transmitting the station name,some FM stations also provide informa-tion on the type of programme they arebroadcasting. Your car radio can receiveand display this information.For example, the programme types canbe:CULTURE TRAVEL JAZZSPORT NEWS POPROCK CLASSICSYou can use the PTY function to selectstations of a particular programme type.

RADIO MODE

38

PTY-EONIf you specify the programme type andstart seek tuning, the radio will switchfrom the current station to a station ofthe selected programme type.Note: If the tuner does not find a station

that matches the selected pro-gramme type, you will hear a beepand NO PTY appears briefly inthe display. The radio will then re-tune to the station that it receivedlast.

If the tuned radio station or anotherstation on the broadcasting net-work broadcasts your selected pro-gramme type at a later point intime, the radio will automaticallyswitch from the currently tuned sta-tion or from CD/MP3 mode or CD-changer mode to the station whoseprogramme type matches the oneyou selected.

Switching PTY on/off


edly until PTY ON or PTY OFFappears in the display.

Press the or button 7 toswitch PTY ON or OFF.

Press the MENU button 8.

Selecting the PTY languageYou can select the language in whichthe programme types are displayed.The following are available:DEUTSCH, ENGLISH andFRANAIS. Press the MENU button 8. Press the or button 7 repeat-

edly until PTY LANG appears inthe display.

Set your preferred language usingthe buttons 7.


Selecting a programme type andstarting seek tuning

Press the or button 7.The current programme type appearsin the display. If you want to select another pro-

gramme type, you can do so bypressing the or button 7whilst this display is visible.

The selected programme type appearsbriefly in the display. Press the or button 7 to start

seek tuning.The radio will then tune into the nextstation it finds that matches your select-ed programme type.

RADIO MODE

39

DANS

KEN

GLI

SHDE

UTSC

HFR

ANA

ISIT

ALIA

NONE

DERL

ANDS

SVEN

SKA

ESPA

OL

PORT

UGU

S

Optimising radio reception

HICUTThe HICUT function improves receptionduring poor radio reception (only FM).If interference occurs, the interferencelevel is cut automatically.Switching HICUT on/off


edly until HICUT appears in thedisplay.

Press the or button 7 to ad-just the HICUT setting.

HICUT 0 means that the interferencelevel will not be cut automatically. HI-CUT 1 means that it will be cut auto-matically. Press the MENU button 8.

Configuring the displayIn radio mode you have the option ofdisplaying the waveband together withthe memory bank / memory location andthe time or the station name / frequen-cy of the current station.Select FREQUENCY to display thestation name / frequency or selectCLOCK to display the waveband to-gether with the memory bank / memorylocation and the clock time.


edly until TUN DISP appears inthe display.

Press the or button 7 toswitch between CLOCK andFREQUENCY.

Press the MENU button 8 twice.

RADIO MODE

40

Traffic informationYour device is equipped with an RDS-EON receiver. EON stands for En-hanced Other Network.Whenever a traffic announcement (TA)is broadcast, the system switches au-tomatically from a station that does notprovide traffic reports to the appropri-ate traffic information station within thebroadcasting network that does.Once the traffic report has been played,the system will switch back to the pro-gramme you were listening to before.

Switching traffic informationpriority on/off Briefly press the TRAF button 6.Traffic announcement priority is activewhen the traffic-jam symbol lights up inthe display.Note:You will hear a warning beep: if you leave the reception area of a

traffic information station that youare currently listening to.

if you are receiving a traffic infor-mation station and the volume isset to minimum (0) or if, whilst lis-tening to a CD/MP3, a CD in thechanger or an AUX source, youleave the reception area of thetuned traffic information station andthe subsequent automatic searchcannot find a new traffic informa-tion station.

if you retune the radio from a trafficinformation station to a station thatdoes not broadcast traffic informa-tion.

If you hear the warning beep, you caneither switch off traffic information pri-ority or tune into a station that broad-casts traffic information.

Setting the volume for trafficannouncements Press the MENU button 8. Press the or button 7 repeat-

edly until TA VOLUME appears inthe display.

Adjust the volume using the buttons 7.

When you have finished adjusting thesetting, press the MENU button 8 twice.Notes: You can use the volume control 4

to adjust the volume during a trafficannouncement for the duration ofthat announcement.

You can set the volume distributionfor the traffic announcements. Forfurther details, please read theSound chapter.

TRAFFIC INFORMATION

41

DANS

KEN

GLI

SHDE

UTSC

HFR

ANA

ISIT

ALIA

NONE

DERL

ANDS

SVEN

SKA

ESPA

OL

PORT

UGU

S

Note: If the vehicle ignition was switched

off before you inserted the CD, youwill first have to switch on the de-vice by pressing button 1 in orderto start playing the CD.

If there is already a CD inserted in thedrive, press the SRC button 2 re-

peatedly until CD appears in thedisplay.

Playback begins from the point at whichit was last interrupted.

Selecting tracks Press one of the arrow buttons 7

to select the next or previous track.If you press the or button 7 once,the current track will be played againfrom the beginning.

Fast track selectionFor fast track selection (backwards orforwards), press and hold down one of the /

buttons 7 until fast-reverse /fast-forward track selection begins.

Fast searching (audible)For fast searching (backwards or for-wards), press and hold down one of the

buttons 7 until fast searchingbackwards / forwards begins.

CD modeYou can use this device to play stand-ard audio CDs, CD-Rs and CD-RWswith a diameter of 12 or 8 cm.

Risk of severe damage to theCD drive!Contoured CDs (shape CDs) are notsuitable for playback in this unit. Wedo not accept responsibility for anydamage to the CD drive that mayoccur as a result of the use of un-suitable CDs.

To ensure the system functions proper-ly, only use CDs labelled with the com-pact disc logo. Problems might be ex-perienced when playing copy-protect-ed CDs. Blaupunkt cannot guaranteethe proper functioning of copy-protect-ed CDs!Besides being able to play audio CDson this device, you can also play CDscontaining MP3 music files. For furtherdetails, please read the MP3 modechapter.

Switching to CD modeIf there is no CD inserted in the drive, Gently push the CD with its printed

side uppermost into the drive 5until you feel some resistance.

The drive draws in the CD automatic-ally.You must not assist or hinder the driveas it draws in the CD.The CD starts playing.

CD MODE

42

track is repeated continuously until youdeactivate RPT.Cancelling REPEATIf you want to cancel the repeat func-tion, press the 4 RPT button : again.RPT OFF appears briefly in the dis-play and the RPT symbol disappears.Normal playback is then resumed.

Pausing playback (PAUSE) Press button 3 :.PAUSE appears in the display.Cancelling pause

Press button 3 : whilst pauseis activated.

Playback is resumed.

Configuring the displayYou can choose between two displaytypes for CD mode: Track number and clock time Track number and playing time Press the MENU button 8. Press the or button 7 repeat-

edly until CD DISP appears in thedisplay.

Press the or button 7 toswitch between PLAY TIME andCLOCK.


Random track play (MIX) Press the 5 MIX button :.MIX CD appears briefly in the displayand the MIX symbol lights up. The nextrandomly selected track will then beplayed.Cancelling MIX

Press the 5 MIX button : again.MIX OFF appears briefly in the dis-play and the MIX symbol disappears.

Scanning tracks (SCAN)You can scan (briefly play) all the trackson the CD. Press and hold down the MENU

button 8 for longer than two sec-onds.

The next track will then be scanned.Note: You can set the scanning time. For

further details, please read the sec-tion entitled Setting the scanningtime in the Radio mode chapter.

Cancelling SCAN and continuinglistening to a track

To cancel scanning, press theMENU button 8.

The currently scanned track will thencontinue to be played normally.

Repeating tracks (REPEAT)If you want to repeat a track, press the 4 RPT button :.RPT TRCK appears briefly in the dis-play and the RPT symbol lights up. The

CD MODE

43

DANS

KEN

GLI

SHDE

UTSC

HFR

ANA

ISIT

ALIA

NONE

DERL

ANDS

SVEN

SKA

ESPA

OL

PORT

UGU

S

Displaying CD textSome CDs include CD text. The CD textmight contain the names of the artist,album and track.You can allow the CD text to be dis-played as scrolling text every time youswitch to another track. The default dis-play will appear again after the wholeCD text has been shown once. For fur-ther details, please read the sectionentitled Configuring the display.Switching CD text on/off


edly until CD TEXT appears inthe display.

Switch the CD text function on(TEXT ON) or off (TEXT OFF)using the or button 7.


Traffic announcements in CDmodeIf you wish to receive traffic announce-ments whilst CD mode is activated, press the TRAF button 6.Traffic announcement priority is activewhen the traffic-jam symbol lights up inthe display. For further details, pleaseread the Traffic information receptionchapter.

CD MODE

Ejecting a CD Press the eject button 3 next to

the CD compartment.The CD is ejected. Remove the CD.Note: If a CD is ejected, the drive will au-

tomatically draw it back in again af-ter approx. 10 seconds.

You can also eject CDs whilst thedevice is switched off or whilst an-other audio source is activated.

44

MP3 modeYou can also use this car sound sys-tem to play CD-Rs and CD-RWs thatcontain MP3 music files.

Preparing an MP3-CDThe various combinations of CD burn-ers, CD burning software and CD blanksmay lead to problems arising with thedevices ability to play certain CDs. Ifproblems occur with your own burnedCDs, you should try another brand ofCD blank or choose another colour ofCD blank.The format of the CD must be ISO 9660Level 1 / Level 2 or Joliet. Other formatscannot be played reliably.You can create a maximum of 252 di-rectories on a CD. You can use this de-vice to access each of the directories.Regardless of the number of directorieson the CD, the device can handle up to999 MP3 files on a single CD with amaximum of 255 files in a directory.

D01

D02

T001

T005T004T003T002

D03

T001

T006T005T004T003T002

T011

T007T008T009T010

D04

T001

T006T005T004T003T002

Directories

Tracks

Files

Each directory can be given a name us-ing a PC. The device is capable of dis-playing the directory name. You shouldname the directories and tracks/filesusing the method provided by your CDburner software. The softwares instruc-tion manual will provide details on howto do this.Note: When naming directories and

tracks/files you should not use ac-cents and special characters.

If you like your files to be in the correctorder, you should use burner softwarethat places files in alphanumerical or-der. If your software does not providethis feature you also have the option ofsorting the files manually. To do so, youshould place a number (e.g. 001,

MP3 MODE

45

DANS

KEN

GLI

SHDE

UTSC

HFR

ANA

ISIT

ALIA

NONE

DERL

ANDS

SVEN

SKA

ESPA

OL

PORT

UGU

S

002, etc.) at the beginning of each filename - you must include the leadingzeros.

MP3 tracks can contain additional in-formation such as the artist, album andtrack names (ID3 tags). This device candisplay ID3 tags (version 1).When creating (encoding) MP3 filesfrom audio files, you should use bit ratesup to a maximum of 256 kbits/sec.This device can only play MP3 files thathave the .MP3 file extension.Note:To ensure uninterrupted playback, do not attempt to change the file

extension to .MP3 of any files oth-er than MP3 files and then attemptto play them! The device will ignorethese invalid files during playback.

Do not use mixed CDs containingboth non-MP3 data and MP3tracks (the device only reads MP3files during MP3 playback).

Do not use mix-mode CDs contain-ing both CD audio tracks and MP3tracks. If you try playing a mix-mode CD, the device will only playthe CD audio tracks.

Switching to MP3 modeMP3 mode is activated in the same wayas normal CD mode. For further details,please read the section entitled Switch-ing to CD mode in the CD mode chap-ter.

Configuring the displayAn MP3-CD must already be insertedin the device before you can change thefollowing settings.Configuring the default displayYou can display various types of infor-mation on the current track: Track number and playing time

(TRCK-TIME) Track number and clock time

(TRCK-CLK) Directory number and track

number (DIR-TRCK) Directory number and clock time

(DIR-CLK) Directory number and playing time

(DIR-TIME)Note: After you switch tracks, the device

first displays the MP3 scrolling textonce and then it displays the infor-mation continuously.

To switch between the different displayoptions, press the MENU button 8. Press the or button 7 repeat-

edly until CD DISP appears in thedisplay.

Select the option that you want us-ing the or button 7.


MP3 MODE

46

Configuring the MP3 scrolling textOne of the following scrolling texts isdisplayed once every time the track ischanged. Afterwards, the configureddefault display is shown.The available scrolling texts are: Directory name (DIR NAME) Track name (SONG NAME) Album name (ALBM NAME) Artist name (ARTIST) File name (FILE NAME)Note: The artist, track and album names

are part of the MP3-ID tag (version1) and can only be displayed if theyhave been saved with the MP3files (for further details, please readthe instructions that came with yourPCs MP3 software or burner soft-ware).

To switch between the different displayoptions, press the MENU button 8. Press the or button 7 repeat-

edly until MP3 DISP appears inthe display.

Use the or button 7 to selectthe MP3 scrolling text that youwant.


Selecting a directoryTo move up or down to another directo-ry, press the or button 7 once or

several times.

Selecting tracks/filesTo move up or down to another track/file in the current directory, press the or button 7 once or

several times.If you press the button 7 once, thecurrent track will be played again fromthe beginning.

Fast searchingFor fast searching (backwards or for-wards), press and hold down the or

button 7 until fast searching back-wards / forwards begins.

Random track play (MIX)To play the tracks in the current directo-ry in random order, briefly press the 5 MIX button :.MIX DIR appears in the display andthe MIX symbol lights up.To play all the tracks on the insertedMP3-CD in random order, press and hold down the 5 MIX

button : for longer than two sec-onds.

MIX CD appears in the display and theMIX symbol lights up.

MP3 MODE

47

DANS

KEN

GLI

SHDE

UTSC

HFR

ANA

ISIT

ALIA

NONE

DERL

ANDS

SVEN

SKA

ESPA

OL

PORT

UGU

S

Cancelling MIXTo cancel MIX, briefly press the 5 MIX button :.MIX OFF appears in the display andthe MIX symbol disappears.

Scanning tracks (SCAN)You can scan (briefly play) all the trackson the CD. Press and hold down the MENU

button 8 for longer than two sec-onds. The next track will then bescanned.

TRK SCAN appears in the displayalongside the flashing track numbers.The tracks on the CD are briefly playedin ascending order.Note: You can set the scanning time. For

details on setting the scanningtime, please read the section enti-tled Setting the scanning time inthe Radio mode chapter.

Cancelling SCAN and continuinglistening to a track

Briefly press the MENU button 8.The currently scanned track will thencontinue to be played normally.

Repeating individual tracks orwhole directories (REPEAT)To play the current track repeatedly, briefly press the 4 RPT button :.RPT TRCK appears briefly in the dis-play and RPT lights up.

To play the whole directory repeatedly, press and hold down the 4 RPT


RPT DIR appears in the display.Cancelling REPEATTo stop the current track or current di-rectory from being repeated, briefly press the 4 RPT button :.RPT OFF appears briefly and RPTdisappears from the display.




MP3 MODE

48

CD-changer mode

Note: Information on handling CDs, in-

serting CDs and operating the CDchanger can be found in the oper-ating instructions supplied withyour CD changer.

Switching to CD-changer mode Press the SRC button 2 re-

peatedly until CHANGER ap-pears in the display.

The device starts playing the first CDthat the CD changer detects.

Selecting CDsTo move up or down to another CD, press the or button 7 once or

several times.

Note: The device will ignore empty CD

slots in the changer and slots con-taining invalid CDs.

Selecting tracksTo move up or down to another trackon the current CD, press the or button 7 once or

several times.

Fast searching (audible)For fast searching (backwards or for-wards), press and hold down one of the

buttons 7 until fast searchingbackwards / forwards begins.

Configuring the displayThere are five display options availablefor CD-changer mode: Track number and playing time

(TRCK-TIME) Track number and clock time

(TRCK-CLK) CD number and track number

(CD-TRCK) CD number and clock time

(CD-CLK) CD number and playing time

(CD-TIME) Press the MENU button 8. Press the or button 7 repeat-

edly until CDC DISP appears inthe display.

Press the or button 7 repeat-edly until the option that you wantis displayed.


Repeating individual tracks orwhole CDs (REPEAT)To repeat the current track, briefly press the 4 RPT button :.RPT TRCK appears briefly and RPTlights up in the display.To repeat the current CD, press and hold down the 4 RPT


RPT DISC appears briefly and RPTlights up in the display.

CD-CHANGER MODE

49

DANS

KEN

GLI

SHDE

UTSC

HFR

ANA

ISIT

ALIA

NONE

DERL

ANDS

SVEN

SKA

ESPA

OL

PORT

UGU

S

Cancelling REPEATTo stop the current track or current CDfrom being repeated, briefly press the 4 RPT button :.RPT OFF appears and RPT disap-pears from the display.

Random track play (MIX)To play the tracks on the current CD inrandom order, briefly press the 5 MIX button :.MIX CD appears briefly and MIX lightsup in the display.To play the tracks on all the inserted CDsin random order, press and hold down the 5 MIX


MIX ALL appears briefly and MIX lightsup in the display.Cancelling MIX Briefly press the 5 MIX button :.MIX OFF appears and MIX disappearsfrom the display.

Scanning all the tracks on all theCDs (SCAN)To scan (briefly play) all the tracks onall the inserted CDs in ascending order, press and hold down the MENU

button 8 for longer than two sec-onds.

TRK SCAN appears in the display andthe number of the current track flashes.

Cancelling SCANTo stop scanning, briefly press the MENU button 8.The currently scanned track will thencontinue to be played normally.Note: You can set the scanning time. For

further details, please read the sec-tion entitled Setting the scanningtime in the Radio mode chapter.




CD-CHANGER MODE

50

CLOCK time

Displaying the clock timeTo display the clock time briefly, press and hold down the SRC

button 2 until the clock time ap-pears in the display.

Setting the clock timeTo set the clock time, press the MENU button 8. Press the or button 7 repeat-

edly until CLOCK SET appears inthe display.

Press the button 7.The clock time appears in the display.The hours flash and can be adjusted. Adjust the hours using the / but-

tons 7.Once the hours are set, press the button 7.The minutes flash. Adjust the minutes using the /

buttons 7. Press the MENU button 8 twice.

Selecting 12/24-hour clockmode Press the MENU button 8.MENU appears in the display. Press the or button 7 repeat-

edly until 24 H MODE or 12 HMODE appears in the display.

Press the or button 7 toswitch between the modes.


Displaying the time continuouslywhen the device is off and theignition is onTo display the time when the device isoff and the vehicle ignition is on, press the MENU button 8.MENU appears in the display. Press the or button 7 repeat-

edly until CLOCK OFF orCLOCK ON appears in the dis-play.

Press the or button 7 toswitch between the ON/OFF set-tings.


Briefly displaying the time whenthe device is switched offTo display the time briefly when the de-vice is off, press the SRC button 2.The time is displayed for eight seconds.

CLOCK TIME

51

DANS

KEN

GLI

SHDE

UTSC

HFR

ANA

ISIT

ALIA

NONE

DERL

ANDS

SVEN

SKA

ESPA

OL

PORT

UGU

S

SoundYou can adjust the sound settings (bassand treble) separately for each source(radio, CD/MP3 and CD changer / AUX).The volume distribution settings (bal-ance and fader) apply to all the audiosources (except for traffic announce-ments).You can only adjust the balance andfader settings for traffic announcementswhilst a traffic announcement is actu-ally being played.

Adjusting the bass Press the AUDIO button 9.BASS appears in the display. Press the or button 7 to ad-

just the bass.When you have finished adjusting thesetting, press the AUDIO button 9.

Adjusting the treble Press the AUDIO button 9.BASS appears in the display. Press the button 7 repeatedly

until TREBLE appears in the dis-play.

Press the or button 7 to ad-just the treble.

When you have finished adjusting thesetting, press the AUDIO button 9.

Setting the left/right volumedistribution (balance)To adjust the left/right volume distribu-tion (balance), press the AUDIO button 9.BASS appears in the display. Press the button 7 repeatedly

until BAL appears in the display. Press the or button 7 to ad-

just the balance (right/left).When you have finished adjusting thesetting, press the AUDIO button 9.

Adjusting the front/rear volumedistribution (fader)To adjust the front/rear volume distribu-tion (fader), press the AUDIO button 9.BASS appears in the display. Press the button 7 repeatedly

until FADER appears in the dis-play.

Press the or button 7 to ad-just the fader (front/rear).


SOUND

52

Equalizer presetsThis device is equipped with an equal-izer that has been preset with settingsfor the ROCK, POP and CLASSICmusic styles.To select an equalizer preset, press the AUDIO button 9.BASS appears in the display. Press the button 7 repeatedly

until POP, ROCK, CLASSIC orEQ OFF appears in the display.

Press the or button 7 to se-lect one of the presets or selectEQ OFF to switch off the equaliz-er. If you select one of the presets,it is shown continuously in the dis-play.


X-BASSYou can use the X-Bass feature to boostthe bass at low volume levels.The selected X-Bass setting affects allthe audio sources (radio, CD/MP3, CDchanger or AUX).You can set the X-BASS boost in stepsranging from 1 to 3.XBASS OFF means that the X-BASSfunction is switched off.

Adjusting the X-BASS boost

Press the AUDIO button 9.BASS appears in the display. Press the button 7 repeatedly

until XBASS appears in the dis-play together with the current set-ting.

Press the or button 7 repeat-edly until the setting that you wantappears in the display.


SOUND X-BASS

53

DANS

KEN

GLI

SHDE

UTSC

HFR

ANA

ISIT

ALIA

NONE

DERL

ANDS

SVEN

SKA

ESPA

OL

PORT

UGU

S

Configuring the leveldisplayThe level display temporarily providesyou with a symbolic representation ofthe volume and audio settings whilst youare adjusting them.When you are not changing any set-tings, the level display depicts the peakmusic/speech output. You can switchthe level display on/off. Press the MENU button 8.MENU appears in the display. Press the or button 7 repeat-

edly until PEAK LVL appears inthe display.

Press the or button 7 toswitch between PEAK ON andPEAK OFF.


External audio sourcesInstead of connecting a CD changer,you can connect another audio sourceequipped with a line output. Audio sourc-es can, for example, be portable CDplayers, MiniDisc players or MP3 play-ers.

If you want to connect an external au-dio source, you will need an adaptercable. You can obtain this cable (Blau-punkt no.: 7 607 897 093) from yourauthorised Blaupunkt dealer.Note: If no CD changer is connected, the

AUX input must be activated in themenu.

Switching the AUX input on/off Press the MENU button 8.MENU appears in the display. Press the or button 7 repeat-

edly until AUX OFF or AUX ONappears in the display.

Press the or button 7 toswitch AUX on/off.

When you have finished adjusting thesetting, press the MENU button 8.Note: If the AUX input is activated, you

can select it by pressing the SRCbutton 2. AUX INPUT then ap-pears in the display.

LEVEL DISPLAY EXTERNAL AUDIO SOURCES

54

Specifications

AmplifierOutput power: 4 x 25 watts sine

in accordance withDIN 45 324at 14.4 V4 x 45 watts max.power

TunerWavebands in Europe:FM : 87.5 - 108 MHzMW: 531 - 1 602 kHzLW : 153 - 279 kHz

FM frequency response:35 - 16,000 Hz

CDFrequency response:

20 - 20,000 Hz

Pre-amp out4 channels: 2 V

Input sensitivityAUX input: 2 V / 6 k

Subject to changes!

SPECIFICATIONS

Bitte den ausgefllten Gertepass sicher aufbewahren!Please keep the filled-in radio pass in a safe place!Prire de conserver soigneusement la carte dautoradio remplie !Tenete per favore il libretto di apparecchio, debitamente riempito,in un posto sicuro!Bewaar de ingevulde apparaatpas op een veilige plaats!Vnligen frvara ifyllt apparatpass p sker plats!Favor guardar el documento del aparato debidamente llenado enun lugar seguro!Por favor, guardar o carto preenchido do aparelho num lugarseguro!Det udfyldte apparatpas opbevares et sikkert sted!

Country: Phone: Fax: WWW:

Germany (D) 0180-5000225 05121-49 4002 http://www.blaupunkt.comAustria (A) 01-610 39 0 01-610 39 391Belgium (B) 02-525 5444 02-525 5263Denmark (DK) 44 898 360 44-898 644Finland (FIN) 09-435 991 09-435 99236France (F) 01-4010 7007 01-4010 7320Great Britain (GB) 01-89583 8880 01-89583 8394Greece (GR) 210 94 27 337 210 94 12 711Ireland (IRL) 01-4149400 01-4598830Italy (I) 02-369 62331 02-369 62464Luxembourg (L) 40 4078 40 2085Netherlands (NL) 023-565 6348 023-565 6331Norway (N) 66-817 000 66-817 157Portugal (P) 01-2185 00144 01-2185 11111Spain (E) 902 52 77 70 91 410 4078Sweden (S) 08-7501500 08-7501810Switzerland (CH) 01-8471644 01-8471650Czech. Rep. (CZ) 02-6130 0441 02-6130 0514Hungary (H) 01-333 9575 01-324 8756Poland (PL) 0800-118922 022-8771260Turkey (TR) 0212-335 06 69 0212-346 00 40USA (USA) 800-2662528 708-6817188Brasil(Mercosur) (BR) +55-19 3745 2769 +55-19 3745 2773Malaysia(Asia Pacific) (MAL) +604-6382 474 +604-6413 640

12/04 - CM/ASA

Blaupunkt GmbH, Robert-Bosch-Strae 200, D-31139 Hildesheim

Gertepass

Name: ....................................................

Typ: 7 645 ...........................................

Serien-Nr: BP ...............................................

Notes and accessories 31Installation instructions 234

02Brighton_EssenMP35 gb.pdfNotes and accessories 31Installation instructions 234

Blaupunkt Essen Mp35 manual

Documents

Transcript of Blaupunkt Essen Mp35 manual