Synborcano™ Nozzles for Blast Cleaning

Synborcano™ Boron carbide nozzles are most long lasting when used for firing abrasive blasting medias like aluminium oxide, silicon carbide, steel shots / grit, glass beads etc. A durable aluminium outer jacket, with integral 50 mm contractor thread, forms the body of the nozzle. Synborcano™ Pressure Blasting Series Pressure Blasting Series Synborcano™ Nozzles not only utilize the same fine 19mm (3/4”) thread as the Short Series nozzles, but also feature a longer, venturi style design. Being a venturi type nozzle, the Medium Series Nozzles provide much higher abrasive velocities than straight bore nozzles along with wider blast patterns. These features ensure much faster cleaning rates, while allowing the Medium Series Nozzles to be used with smaller capacity blast pots, using only 12.5mm (1/2”) blast hose. Synborcano™ Suction/Wet Blasting Series Suction/Wet Boron Carbide nozzles have inner liner and an aluminium outer sleeve, incorporating a 3/4" (19mm) straight thread, for connection to the nozzle holder. These Blast Nozzles may also be utilized for spot blasting small areas or weld seams if the blast pattern from a venturi nozzle would be inappropriate and wasteful due to its size.

For More Details Contact Us At

SYNCO INDUSTRIES LIMITED 16-A (III), Heavy Industrial Area,

Jodhpur - 342 005 Cell: +91 - 9214407021

Tel: +91 - 291 - 2741571/671 Fax: +91 - 291 - 2742557 Email: mail@synco.co.in Web: www.synco.co.in