BLACKMER PARTS CATALOG MODEL LGLD2E

- 68 -

CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869

GOLDSBORO, NC (800) 426-9293

BLACKMER PUMPS

FLANGE MOUNTING -DIRECT MOTOR DRIVEThese small positive displacement pumpsare ideal for filling cylinders and motor fueltanks. They mount directly to a C-facemotor & have built in “back to the tank”bypass valves.

PUMP ONLY Item # Size CapacityLGF1E 1” 10 GPMLGF1PE 1” 15 GPMLGRLF1-1 1/4 1 1/4” 18 GPM

Pumps, Bypass ValvesBLACKMER PUMPSVB DRIVE STYLE

LGF DRIVE STYLE

DM DRIVE STYLE

* Comes with one 2” flanged elbow. For two elbows, order TLGLF3C-2.

Item # Size Capacity

LGL1-1/4DM 1 1/4” 20 GPM

LGL1-1/2DM 1 1/2” 30 GPM

BLACKMER BY-PASS VALVESDifferential bypass valves are designed toprotect pumps and system componentsfrom excessive pressure damage. Weldflanges are available by special order.

FISHER BY-PASS VALVES.

Pump Pressure Adjust.

Item # Size Size Setting Range

N100A-10-2 1 1/4” 2”-3” 115 psi 50-150 psi

N100A-12-2 1 1/2” 2”-3” 115 psi 50-150 psi

N100-16-2 2” 4” 115 psi 50-150 psi

Pump Pressure Adjust.

Item # Size Size Setting Range Cap.

BV-3/4 3/4” 1 1/4”-1 1/2” 95 psi 70-100 psi 50 GPM

BV-1 1” 1 1/4”-1 1/2” 95 psi 70-100 psi 50 GPM

BV-1 1/4 1 1/4” 1 1/2”-2” 95 psi 70-125 psi 125 GPM

BV-1 1/2 1 1/2” 2”-3” 95 psi 70-125 psi 125 GPM

BV-2-30 2” 3”-4” 30 psi 20-40 psi 225 GPM

BV-2-55 2” 3”-4” 55 psi 41-70 psi 225 GPM

BV-2-95 2” 3”-4” 95 psi 90-125 psi 225 GPM

BY-PASS VALVES

FLANGE MOUNTED PUMPSFOR BOBTAILS & TRANSPORTSCapacity is at 870 RPM and 50 psidifferential pressure.

Item # Inlet Aux. Inlet Outlet Capacity

TLGLF3C* 3” flange 2” FNPT 2” FNPT 100 GPM

TLGLF4B 4” flange 3” FNPT Dual 2” FNPT 379 GPM

BASE MOUNTED - V-BELT DRIVEPUMP ONLYCapacity is at 640 RPM and 50 psidifferential pressure.


LGLD2E 2” 67 GPM

LGLD3E 3” 133 GPM

LGLD4 4” inlet 3” outlet 270 GPM

PUMP ASSEMBLYPump, hubs, sheaves, high-torque tripleV-belts and belt guard mounted on acommon base, ready to accept astandard NEMA motor. Capacity at 640RPM and 50 psi differential pressure.


LGLD2E-VB 2” 67 GPM

LGLD3E-VB 3” 133 GPM

LGLD4-VB 4” inlet 3” outlet 270 GPM

PUMP ASSEMBLYPump, coupling and coupling guard,mounted on a common base, ready toaccept a standard NEMA motor.

BRACKET MOUNTING -DIRECT MOTOR DRIVEThese durable motor speed pumps offercapacities up to 35 GPM and are idealfor motor fueling, multiple station cylinderfilling and a variety or small transfer jobs.They are designed for foot mounting toa common base plate.

PUMP ONLYItem # Size Capacity

LGL1-1/4 1 1/4” 20 GPM

LGL1-1/2 1 1/2” 30 GPM

LDF1 SERIESDISPENSER PUMPS

Similar to the LGF1 Series, but these are assembled with left-hand rotation which will allow them to retrofit in place of Corken C Series pumps. These pumps require an external bypass valve.

Item# Size Capacity

LDF1A 1” 10 GPM

LDF1PA 1” 15 GPM

* To include a switch with the assembly, add an “A” suffix to the item #. (LGFIE-101A)

LGF1 SERIESw/ 115/230V Motor

Item # * Size HP CapacityLGF1E-101 1” 1 10 GPM

LGF1PE-151 1” 1 1/2 15 GPM

LGRLF-151 1 1/4” 1 1/2 18 GPM

H

CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293 - 69 -

BLACKMER PUMP PARTSRepair Kits & Individual Parts

Kit Number Pump Replaces

898994 LGF1E & PE - 4 Vane 892950

898994 LGF1E & PE - 6 Vane

898917 LGRLG-1 1/4 - 4 Vane 892302

898918 LGL-1 1/4 - 4 Vane 892301

898919 LGL-1 1/2 - 4 Vane 892360

898976 LGRLF-LGL 1 1/4 & LGL1’s - 8 Vane

898979 LGLD2E* 894420

898981 LGLD3E* 894427

898922 LGLD4*

898980 TLGLF3C* 895123

898922 TLGLF4A* 892031

899224 TLGLF4B

.

Kit Number Pump Replaces

899017 LGRLG-1 1/4 - 4 Vane

899018 LGL-1 1/4 - 4 Vane

899019 LGL-1 1/2 - 4 Vane

899076 LGRLF-1 1/4 - 8 Vane

899077 LGL-1 1/4 - 8 Vane

899078 LGL-1 1/2 - 8 Vane

899079 LGLD2E*

899081 LGLD3E*

899080 TLGLF3C*

899022 TLGLF4A & LGLD-4

899124 TLGLF4B

BLACKMER REBUILD KITSRebuild kits include maintenance kits, rotor & shaft and liners.”

* These kits include new and improved QA seal assemblies and double

end rotor and shaft.

BLACKMER MAINTENANCE KITSMaintenance kits do not include pump relief valve parts.

* These kits include new and improved QA seal assemblies

H

- 70 -


GOLDSBORO, NC (800) 426-9293

BLACKMER PARTS LIST

PUMP MODELS: LGF1E, LGB1E, LGF1PE, LGB1PEand Discontinued Models

LGF1D, LGB1D, LGF1PD, LGB1PD, LGF1C, LGB1C, LGF1PC, LGB1PC(See Instructions 501-A00 for Installation, Operation and Maintenance)

Ref.No.

DescriptionPartsper

PumpPart No.

Ref.No.

DescriptionPartsper

PumpPart No.

2 Adjusting Screw – Relief Valve (R/V) 1 432901 28 † Capscrews – Bearing Cover 4 9200803 Locknut – Adjusting Screw 1 922811 28A † Bracket Mounting Screws 4 9200904 Cover – R/V 1 412901 28B † Bracket Mounting Screws 4 920101

4A O-Ring – Spring Guide 1 1 711940 28C Guard Screw 1 9200267 Spring Guide – R/V 1 422901 Coupling Half – Pump 9061508 Spring – R/V 1 472901 Coupling Half – Motor (56C) 906151

9 Valve – R/V 1 452901Coupling Half – Motor(143-145TC/184C)

906147

9A Disc – R/V 1 442901

34

Coupling Spider

1

90615510 O-Ring – R/V Cover 1 1 701965 35 Key – Shaft 1 1 909126

Cylinder – LGF1, LGB1 022914 72 O-Ring – Head 1 1 71194112 †

Cylinder – LGF1P, LGB1P1

022915 73 Gage Plug (1/4”) 2 90819873A † Plug (3/4”), External Bypass 1 908225

13Rotor & Shaft Assembly, Six Vane 2

(Includes Ref. Nos. 24A & 24B)

1 26290776 Grease Fitting 2 317815

14 Vane – Duravane (Std.)3 4, 6 1 092913 76A Grease Relief Fitting 2 70199220 † Head 1 032905 104 Grease Seal 1 1 33193421 Capscrews – Head 4 920178 Bracket - (base mount) - LGB1(P)D 83291324 Ball Bearing 2 1 903405

108Bracket (C-faced footless) - LGF1(P)D

1832912

24A Locknut – Bearing 2 903531 108A Capscrews – Bracket 4 92033124B Lockwasher – Bearing 2 1 903532 108B Bracket (C-faced footed) SEE PAGE 226 † Gasket – Bearing Cover 1 1 383075 186 Guard 1 80412027 † Bearing Cover 1 043071 Tool - Locknut 903090

Kit – Maintenance (4-Vane) 898916Kit – Maintenance (6-Vane) 898994

1 Included in Maintenance Kit. 2 Discontinued 'D' and 'C' models shipped with a 4-vane rotor. The current 6-vane rotor is fully interchangeable aslong as the slotted vanes (pn 092913) are used. 3 The current slotted vanes (pn 092913) may be used in either the 6-vane or 4-vane rotors.The discontinued solid vanes may be used in the 4-vane rotors ONLY. Always install the vanes with the slot facing the direction of rotation. † To fit the LGB1(P)C, LGF1(P)C use: Ref. No. 12-022902/022911 respectively, Ref. No. 20-032902, Ref. No. 26-382901, Ref. No. 27-042901,Ref. No. 28-920203, Ref. No. 28A & B-920230, Ref. No. 73A-908198, and Ref. No.108-832901/832905 respectively.Keep this parts list with Installation, Operation and Maintenance Instructions.

LOCKNUT TOOL

BLACKMER PUMP PARTS

H


MECHANICAL SEAL

Ref.No.

Part NamePartsPer

PumpPart No.

153 Mechanical Seal Assembly 21 332920

153A** Jacket Assembly – Seal 2 332922153B** Stationary Seat (Steel) 2 332901153D O-Ring – Stationary Seat (Buna-N) 2 711916153F** Seal Face (Carbon) 2 332902153G O-ring – Rotating (Buna-N) 2 711939

1 Included in Maintenance Kit ** Ref. Nos. 153A, 153B & 153F are not available as separate repair parts.

MOUNTING BRACKET

Ref.No.

Part NamePartsPer

PumpPart No.

108B Bracket (C-faced footed) – LGF1(P)D 1 833000

BLACKMER PUMP PARTSPUMP MODELS: LGF1E, LGB1E, LGF1PE, LGB1PE (CONTINUED)

H

- 72 -


GOLDSBORO, NC (800) 426-9293

BLACKMER PARTS LIST

PUMP MODELS: LGRL1.25, LGRLF1.25A, LGL1.25,LGLF1.25A, LGL1.5, LGLF1.5A

and discontinued models: LGRLF1.25, LGLF1.25

(See Instructions 501-B00 for Installation, Operation and Maintenance)

Ref.No.

DescriptionPartsper

PumpPart No.

Ref.No.

DescriptionPartsper

PumpPart No.

1 Cap – Relief Valve (R/V) 1 413200 Liner – LGRL(F)1.25 [8 - Vane Only] 2 183019

2 Adjusting Screw – R/V 1 433909 Liner – LGL(F)1.25 [8 - Vane Only] 2 183020

3 Locknut – Adjusting Screw 1 922923

41

Liner – LGL(F)1.5 [8 - Vane Only]

12 183310

4 Cover – R/V 1 413076 Liner – LGRL(F)1.25 [4 - Vane Only] 2 183003

7 Spring Guide – R/V 1 423955 Liner – LGL(F)1.25 [4 - Vane Only] 2 183004

8 Spring – R/V (81 – 125 psi) 1 471428

41A

Liner – LGL(F)1.5 [4 - Vane Only]

12 183301

Valve - R/V (Std.) 453077 71 Disc 2 1 0630759

Valve - R/V (Nickel Plated)1

452300 72 O-Ring – Head 2 1 701918

10 O-Ring – R/V Cover 1 1 711924 73 Gage Plug (1/4”) 1 908198

Casing with feet (1.25) 013075 73A Gage Plug (3/4”) 1 90822512

Casing with feet (1.5) 1

013376 74 Setscrew – Liner 1 922088

76 Grease Fitting 2 31781513

Rotor & Shaft Assembly, Eight Vane(Includes Ref. Nos. 24A & 24B)(Std.)

1 2 26230076A Grease Relief Fitting 2 701992

Push Rod – LGRL(F)1.25 1 12300413A

Rotor & Shaft Assembly, Four Vane(Includes Ref. Nos. 24A & 24B)

1 2 263076Push Rod – LGL(F)1.25 1 123076

14 Vane – Duravane 4-8 1 093088

77

Push Rod LGL(F)1.5

0-21 123401

20 Head 2 033073 88 O-Ring – R/V Cap 1 1 701949

21 Capscrews – Head 16 920276 104 Grease Seal 1 1 331927

24 Ball Bearing 2 1 903114 — Tool - Locknut — 903090

24A Locknut – Bearing 2 2 903534 — Kit – Maint LGRL(F)1.25A [4 Vane] — 898917

24B Lockwasher – Bearing 2 1 903533 — Kit - Maint LGL(F)1.25(A) [4 Vane] — 898918

26 Gasket - Bearing Cover 3 2 1 383075 — Kit - Maint LGL(F)1.5(A) [4 Vane] — 898919

27 Bearing Cover – Inboard 5 0-1 043070 —Kit - Maintenance

LG(R)L(F)1.25(A) / 1.5(A) [8 Vane]— 898976

27A Bearing Cover – Outboard 1 043071 — Kit - Rebuild LGRL(F)1.25A [4 Vane] — 899017

28 Capscrews – Bearing Cover 4 4 - 8 920080 — Kit - Rebuild LGL(F)1.25(A) [4 Vane] — 899018

35 Shaft Key 1 1 909125 — Kit - Rebuild LGL(F)1.5(A) [4 Vane] — 899019

— Kit - Rebuild LGRL(F)1.25A [8 Vane] — 899076

— Kit - Rebuild LGL(F)1.25(A) [8 Vane] — 899077

1 Included in Maintenance Kits and Rebuild Kits2 Included in Rebuild Kits.

— Kit - Rebuild LGL(F)1.5(A) [8 Vane] — 899078

Note: Earlier model pumps used taper pins, which are no longer required.Ref. No. 73A: Earlier versions of these pumps may use a 1/4” plug (pn 908198) or 1/2” plug (pn 908215).Keep this parts list with Installation, Operation and Maintenance Instructions.The following applies to LG(R)LF pump models only: 3 Use one outboard 4 Use four outboard 5 Use none.

4-Vane Rotor

LOCKNUT TOOL

BLACKMER PUMP PARTS

H


FLANGE ‘F’ MOUNTING

Ref. No. DescriptionPartsper

Pump

Part No.

Casing w/o Feet – LG(R)LF1.25 01307712A

Casing w/o Feet – LGLF1.51

013377

26 Gasket - Bearing Cover 1 383075

28A Bracket Mounting Screws 4 920101

28C Guard Screw 1 920026

Coupling Half – Pump 906147

Coupling Spider 906155

Coupling Half – Motor (56C) 906151

Coupling Half – Motor(143TC,145TC,184C)

90614734

Coupling Half – Motor(182TC,184TC,215C)

1

906146

56 Capscrews – Adapter Ring Mounting 4 920480


76A Grease Relief Fitting 1 701992

86Motor Adapter Ring-182TC,184TC,215C

1 832914

104 Grease Seal 1 331927

108 6 Mounting Bracket

Includes Ref. Nos. 76 & 76A1 832912

108B Capscrews - Bracket 4 920331

186 Guard 1 8041206 Use (P/N 833000 – Mounting Bracket w/ feet) on

discontinued models LG(R)LF1.25 and LGLF1.5

MECHANICAL SEAL

Ref.No.

Part NamePartsPer

PumpPart No.

153 Mechanical Seal Assembly 21 333045

153A Stationary Seat ( Hardened Steel ) 2 **

153B Seal Face ( Carbon ) 2 **

153C Jacket Assembly 2 **

153D O-Ring – Stationary (Buna-N) 2 711916

153E O-Ring – Rotating (Buna-N) 2 7119151 Included in Maintenance Kits and Rebuild Kits

** NOTE: Mechanical Seal Ref. No. 153 is only sold as a complete assembly.Ref. Nos. 153A, 153B & 153C are not available asseparate replacement parts.

BLACKMER PUMP PARTSPUMP MODELS LGR1.25, LGRLF1.25A, LGL1.25, LGLF1.25A, LGL1.5, LGLF1.5A (CONTINUED)

H

- 74 -


GOLDSBORO, NC (800) 426-9293

BLACKMER PUMP PARTS

BLACKMER PARTS LIST PUMP MODELS: LGLD2E, LGLD3E

DISCONTINUED MODELS: LGL2E, TLGLD2E, LGL3E, TLGLD3E (See Instructions 501-C00 for Installation, Operation and Maintenance)

Ref. No. Description

Parts Per

Pump

Size 2 Part No.

Size 3 Part No.


Parts Per

Pump

Size 2 Part No.

Size 3 Part No.

4 Cover - Relief Valve (R/V) 1 414401 415113 35 Key - Shaft 1 1 909130 1 9091305 Capscrews - R/V Cover 6 920331 920331 41 Liner 1 2 184405 2 1851118 Spring - R/V 1 471423 475135 Flange - NPT 654401 655112

Valve - R/V (Std.) 454405 45512942

Flange - Weld 2

654405 6551029 Valve - R/V (Nickel Plated)

1 454406 455100 42A O-Ring - Flange 2 1 702004 1 702002

10 O-Ring - R/V Cover 1 1 701919 1 701925 Capscrew - NPT Flange 920384 92054712 Casing 1 014405 015127

42B Capscrew - Weld Flange

8 920351 920510

71 Disc 2 1 064412 1 06511213 Rotor & Shaft Asy. - LGL (Includes Ref. Nos. 24A & 24B) 1 264443 265149

72 O-Ring - Head 2 1 702022 1 70204173 Gage Plug 2 908198 90819813A Rotor & Shaft Asy. - LGLD, TLGLD5

(Includes Ref. Nos. 24A & 24B) 1 2 264445 2 26514874 Key – Liner 1 2, 6 183991 2 185191

14 Vane - Duravane (Std.) 6 1 091419 1 095131 76 Grease Fitting 2 317815 31781520 Head 2 034416 035128 76A Grease Relief Fitting 2 701992 701992

Capscrews - Head (Size 2) 32 920351 N/A 77 Push Rod 3 1 123905 1 12510521 Capscrews - Head (Size 3) 40 N/A 920369 104 Grease Seal 1 1, 3 331918 1, 3 331908

24 Ball Bearing 2 1 903156 1 903172 123A Dirt Shield 1 1, 3 701480 N/A 24A Locknut - Bearing 2 2 903521 2 903523 Shaft Protector 24B Lockwasher - Bearing 2 1 903522 1 903524

186 (LGLD, TLGLD Models Only)

1 341601 341801

26 Gasket - Bearing Cover 2 1 383940 1 385125 — Tool - Locknut — 903091 90309127 Bearing Cover (Inboard) 3 1 041431 041815 — Kit – Maintenance — 898979 898981

27A Bearing Cover (Outboard) 4 1 041433 041817 — Kit – Rebuild — 899079 89908128 Capscrews - Bearing Cover 8 - 12 920285 920285

1 Included in Maintenance Kit and Rebuild Kit 2 Included in Rebuild Kit The following applies to double end shaft pump models LGLD2E, TLGLD2E, LGLD3E & TLGLD3E: 3 Use Two 4 Use None 5 Double-Ended Rotor & Shaft. 6 Pump models before 1995 require key 184407. Keep this parts list with Installation, Operation and Maintenance Instructions.

LOCKNUT TOOL

H


MECHANICAL SEAL – NH3 OR DUAL SERVICE – SNCN (ID Code = QA)

Ref. No. Part Name

Parts Per

Pump

Size 2 Part No.

Size 3 Part No.

153 Mechanical Seal Assembly 2 1 334439 1 335225153A Stationary Seat (Steel) 2 ** ** 153B Seal Face (Carbon) 2 ** ** 153C Jacket Assembly 2 ** ** 153D O-Ring - Stationary (Buna-N) 2 711924 702025153E O-Ring Rotating (Buna-N) 2 711918 711912

1 Included in Maintenance Kit and Rebuild Kit ** NOTE: Mechanical Seal Ref. No. 153 is only sold as a complete assembly. Ref. Nos. 153A, 153B & 153C are not available as separate replacement parts. OPTIONAL HYDRAULIC MOTOR ADAPTER PARTS

Ref. No. Part Name Parts Per Pump

Size 2 Part No.

Size 3 Part No.

See Below Hydraulic Motor Adapter Kit * See Below 894425 895140 26A Gasket- Hydraulic Motor Adapter 1 383940 381817 28A Capscrew – Hydraulic Motor Adapter / Head 4 / 6 920369 920369

34 Coupling w/ Setscrew – 1.25” straight key hydraulic motor shaft 1 906967 906967

35 Key – Coupling 1 909184 909184 76 Grease Fitting 1 317185 317815

76A Grease Relief Fitting 1 701992 701992 135 Hydraulic Motor Adapter – SAE A Flange 1 041827 041831

135A Capscrew – Adapter / Motor 2 920510 920510 * Hydraulic Motor Adapter Kits shipped prior to Spring 2002 were of a two piece design – refer to page 206-C00.

LGLD2E LGLD3E

BLACKMER PUMP PARTSPUMP MODELS: LGLD2E, LGLD3E, LGL2E, TLGLD2E, LGL3E, TLGLD3E (CONTINUED)

H

- 76 -


GOLDSBORO, NC (800) 426-9293

BLACKMER PUMP PARTS

BLACKMER PARTS LIST PUMP MODELS: LGLD4A, LGL4A

DISCONTINUED MODELS: LGL4, LGLD4 (See Instructions 501-E00 for Installation, Operation and Maintenance)

`


Parts Per

PumpPart No. Ref.

No. Description Parts Per

PumpPart No.

1 Cap - Relief Valve (R/V) 1 413952 28 Capscrews - Bearing Cover 12 920286 2 Adjusting Screw - R/V 1 NOTE 3 35 Key – Shaft 1 1 909183 3 Locknut - Adjusting Screw 1 NOTE 3 41 Liner 1 2 182000 4 Cover - R/V 1 412001 Flange - 3" NPT 652012 5 Capscrew - R/V Cover 4 920663 Flange - 3" Weld 652007 7 Spring Guide - R/V 1 426355

42 Flange - 4" Weld

1 - 2 652005

8 Spring - R/V 1 NOTE 3 42A O-Ring - NPT, Weld Flange 2 1 701937 9 Valve - R/V 1 452001 Capscrew - NPT Flange 920663

10 O-Ring - R/V Cover 1 1 70194642B

Capscrew - Weld Flange 8

920640 12 Casing 1 NOTE 3 71 Disc 2 1 062039

71A Machine Screw - Disc 8 2 920015 Rotor & Shaft Asy, Dbl. End - LGLD4(A) (Includes Ref. No. 24A & 24B)

2 26202471B* Lockwasher - Machine Screw 8 2 909634 72 O-Ring - Head 2 1 702039

13 Rotor & Shaft Asy, Sgl. End - LGL4(A) (Includes Ref. No. 24A & 24B)

1 262023

73 Gage Plug 2 908198 14 Vane - Duravane (Std.) 6 1 092019 74 Key - Liner 1 2 182040 20 Head 2 032039 76 Grease Fitting 2 317815 21 Capscrews - Head 36 920532 76A Grease Relief Fitting 2 701992 24 Ball Bearing 2 1 903172 77 Push Rod 3 1 122005

24A Locknut – Bearing 2 2 903541 88 O-Ring - R/V Cap 1 1 701926 24B Lockwasher – Bearing 2 1 903542 Grease Seal – LGLD4(A) 2 26 Gasket - Bearing Cover 2 1 385125

104 Grease Seal – LGL4(A) 1

1 331908

Bearing Cover – LGLD4(A) 2 186 Shaft Protector (LGLD4 Only) 1 341801 27

Bearing Cover – Inboard, LGL4(A) 1 041815

Tool - Locknut 903092 27A Bearing Cover – Outboard, LGL4(A) 1 041817 Kit - Maintenance 898922 Kit - Rebuild 899022

1 Included in Maintenance Kit and Rebuild Kit 2 Included in Rebuild Kit Note 3 – See Table on other side for proper parts.

Keep this parts list with Installation, Operation and Maintenance Instructions.

LOCKNUT TOOL

H


BLACKMER PUMP PARTSPUMP MODELS: LGLD4A, LGL4A, LGL4, LGLD4 (CONTINUED)

MECHANICAL SEAL - STANDARD

Ref. No. Part Name

Parts Per

PumpPart No.

153 Mechanical Seal Assembly 2 1 332050 153A Stationary Seat (Hardened Steel) 2 ** 153B Seal Face (Carbon) 2 ** 153C Jacket Assembly 2 ** 153D O-Ring - Stationary (Buna-N) 2 701934153E O-Ring - Rotating (Buna-N) 2 711912

1 Included in Maintenance Kit and Rebuild Kit ** NOTE: Mechanical Seal Ref. No. 153 is only sold as a complete assembly. Ref. Nos. 153A, 153B & 153C are not available as separate replacement parts. Use the table below to determine the proper parts for each model.

LGLD4A and LGL4A Discontinued LGLD4 and LGL4 Ref. No

Part Name Parts Per Pump Part No. Part No.

2 Adjusting Screw - R/V 1 436310 436307 3 Locknut - Adjusting Screw 1 432039 436355 8 Spring - R/V 1 472039 476305 12 Casing 1 012009 012000

Use Dimension ‘A’ as shown in the drawing to determine the pump model number. The pump model number will also be shown on the nameplate.

Model Dim ‘A’ LGLD4A, LGL4A 2.19 in. 5.56 cm.

LGLD4, LGL4 1.75 in. 4.45 cm. HYDRAULIC MOTOR ADAPTER PARTS

REF. NO. PART NAME

PARTS PER

PUMP

PART NO.

See Below Hydraulic Motor Adapter Kit

*

See Below 892037

26A Gasket – Hydraulic Motor Adapter 1 381817

28A Capscrew – Hydraulic Motor Adapter / Head 6 920369

34 Coupling w/ Setscrew – 1.25” straight key hyd. motor shaft 1 906970

35 Key – Coupling 1 909184



135 Hydraulic Motor Adapter – SAE A Flange 1 041829

135A Capscrew – Adapter / Motor 2 920510

* Hydraulic Motor Adapter Kits shipped prior to Spring 2002 were a two piece design – refer to page 206-C00.

H

- 78 -


GOLDSBORO, NC (800) 426-9293

BLACKMER PUMP PARTS

BLACKMER PARTS LIST PUMP MODEL: TLGLF3C

(See Instructions 501-D00 for Installation, Operation and Maintenance)


Parts Per

Pump Part No. Ref.


PumpPart No.

4 Cover - Relief Valve (R/V) 1 4 415108 O-Ring – Flange 2 1/2” x 2 3/4” 2 1 701919 5 Capscrew - R/V Cover 6 920331

42A O-Ring – Flange 2 5/8” x 2 7/8” 2 1,3702004

8 Spring - R/V 1 4 471428 42B Capscrew - Flange, Flanged Elbow 8 920491 Valve - R/V (Std.) 4 451417 71 Disc 2 1 065121

9 Valve - R/V (Nickel Plated)

1 451415 72 O-Ring - Head 2 1 711923

10 O-Ring - R/V Cover 1 1 701919 73 Gage Plug 2 908198 12 Casing 1 015128 74 Key - Liner 1 2 185193

Rotor & Shaft Assembly 76 Grease Fitting 2 317815 13

(Includes Ref. No. 24A & 24B) 1 2 265147

76A Grease Relief Fitting 2 701992 14 Vane - Duravane 6 1 095132 77 Push Rod 3 1 121607 20 Head 2 035132 104 Grease Seal 2 1 331918 21 Capscrews - Head 36 920351 123 Dirt Shield 2 1 701480 24 Ball Bearing 2 1 903156 186 Shaft Protector 1 341601

24A Locknut - Bearing 2 2 903521 — Tool - Locknut 903091 24B Lockwasher - Bearing 2 1 903522 — Kit – Maintenance — 898980 26 Gasket - Bearing Cover 2 1 383940 — Kit – Maintenance with R/V — 899225 27 Bearing Cover 2 041431 — Kit – Rebuild — 899080 28 Capscrews - Bearing Cover 8 920285 — Kit – Rebuild with R/V — 899125 35 Key - Shaft 1 1 909130 41 Liner 1 2 185101 Flange - 2" NPT 652010

42 Flange - 2" Weld 1-2 652024 Flanged Elbow - 2" NPT 655100 Flanged Elbow - 2" Weld 655109

1 Included in Maintenance Kit and Rebuild Kit 2 Included in Rebuild Kit 3 Larger O-Ring introduced October 2002 4 Additional Parts Included in Maintenance Kit with R/V

Keep this parts list with Installation, Operation and Maintenance Instructions.

LOCKNUT TOOL

H


BLACKMER PUMP PARTS

H

MECHANICAL SEAL – NH3 OR DUAL SERVICE – SNCN (ID Code = QA)

Ref. No. Part Name

Parts Per

Pump Part No.

153 Mechanical Seal Assembly 2 1 334439153A Stationary Seat (Steel) 2 ** 153B Seal Face (Carbon) 2 ** 153C Jacket Assembly 2 ** 153D O-Ring - Stationary (Buna-N) 2 711924153E O-Ring - Rotating (Buna-N) 2 711918

1 Included in Maintenance Kit and Rebuild Kit ** NOTE: Mechanical Seal Ref. No. 153 is only sold as a complete assembly. Ref. Nos. 153A, 153B & 153C are not available as separate replacement parts.

OPTIONAL HYDRAULIC MOTOR ADAPTER PARTS

REF. NO.

PART NAME PARTS PER

PUMP

PART NO.

See Below

Hydraulic Motor Adapter Kit * See

Below 891458

26A Gasket – Hydraulic Motor Adapter 1 383940 28A Capscrew –

Hydraulic Motor Adapter / Head 4 920369

34 Coupling w/ Setscrew – for 1.25” straight key hyd. motor shaft

1 906967

35 Key – Coupling 1 909184 76 Grease Fitting 1 317815

76A Grease Relief Fitting 1 701992 135 Hydraulic Motor Adapter –

SAE A Flange 1 041828

135A Capscrew – Adapter / Motor 2 920510 * Hydraulic Motor Adapter Kits shipped prior to Spring 2002 were of a two two piece design – refer to page 206-C00.

PUMP MODEL: TLGLF3C (CONTINUED)

- 80 -


GOLDSBORO, NC (800) 426-9293

BLACKMER PARTS LIST PUMP MODEL: TLGLF4A DISCONTINUED MODEL: TLGLF4

(See Instructions 501-E00 for Installation, Operation and Maintenance)


Parts Per

Pump

TLGLF4A Part No.

TLGLF4 Part No.


Parts Per

Pump

TLGLF4A Part No.

TLGLF4 Part No.

1 Cap - Relief Valve (R/V) 1 413952 413952 42A O-Ring - Flange 1 701937 701937

2 Adjusting Screw - R/V 1 436310 436307 42B Capscrew - 3" NPT Flange 4 920663 920663 3 Locknut - Adjusting Screw 1 432039 436355 Capscrew - 3", 4" 920640 920640 4 Cover - R/V 1 412001 412001 Weld Flange; Blank Flange 5 Capscrews - R/V Cover 4 920663 920663 TWIN DISCHARGE PORT OPTIONS 7 Spring Guide - R/V 1 426355 426355 43 Flange - 2" NPT 2 652010 652010 8 Spring - R/V 1 472039 472039 Flange - 2" Weld 652024 652024 9 Valve - R/V 1 452001 452001 43A O-Ring - 2" Flange 21/2” x 23/4” 2 1 701919 701919

10 O-Ring - R/V Cover 1 1 701946 701946 O-Ring - 2" Flange 25/8” x 27/8” 2 1,3 702004 702004 12 Casing 1 012039 012039 43B Capscrew - Discharge Flange 8 920491 920491 13 Rotor & Shaft Asy. 1 2 262024 262022 71 Disc 2 1 062039 062039

(includes Ref. No. 24A & 248) 71A Machine Screw - Disc 8 2 920015 920015 14 Vane - Duravane (Std.) 6 1 092019 092019 71B Lockwasher - Machine Screw 8 2 909634 909634 20 Head 2 032039 032039 72 O-Ring - Head 2 1 702039 702039 21 Capscrews - Head 36 920532 920532 73 Gage Plug 2 908198 908198 24 Ball Bearing 2 1 903172 903172 74 Key - Liner 1 2 182040 182040

24A Locknut - Bearing 2 2 903541 903523 76 Grease Fitting 2 317815 317815 24B Lockwasher - Bearing 2 1 903542 903524 76A Grease Relief Fitting 2 701992 701992 26 Gasket - Bearing Cover 2 1 385125 385125 77 Push Rod 3 1 122005 122001 27 Bearing Cover 2 041815 041815 88 O-Ring - R/V Cap 1 1 701926 701926 28 Capscrews - Bearing Cover 12 920286 920286 104 Grease Seal 2 1 331908 331908 35 Key - Shaft 1 1 909183 909183 186 Shaft, Protector 1 341801 341801 41 Liner 1 2 182000 182039 Tool - Locknut 903092 903091

AUXILIARY INTAKE OPTIONS Kit - Maintenance 898922 N/A 42 Flange - 3" NPT 1 652012 652012 Kit - Rebuild 899022 N/A

Flange - 4" Weld 652005 652005 Flange - 3" Weld 652007 652007 Flange - Blank 652000 652000

1 Included in Maintenance Kit and Rebuild Kit 2 Included in Rebuild Kit 3 Larger O-Ring introduced October 2002 Keep this parts list with Installation, Operation and Maintenance Instructions

LOCKNUT TOOL

Discontinued Models Parts availibility may be limited.

BLACKMER PUMP PARTS

H


MECHANICAL SEAL

Ref. No. Part Name Parts Per

Pump Part No.

153 Mechanical Seal Assembly 2 1 332050 153A Stationary Seat (Hardened Steel) 2 ** 153B Seal Face (Carbon) 2 ** 153C Jacket Assembly 2 ** 153D O-Ring - Stationary (Buna-N) 2 701934 153E O-Ring - Rotating (Buna-N) 2 711912

1 Included in Maintenance Kit and Rebuild Kit ** NOTE: Mechanical Seal Assy. (Ref. 153) is only sold as a complete assembly. Ref. Nos. 153A, 153B & 153C are not available as separate replacement parts.

TLGLF4 TLGLF4A

Interchangeability status w/TLGLF4A Interchangeability status w/TLGLF4 Part Name

PART NO. REF. PART NO. REF. Push Rods 122001 c 1 122005 c Liner 182039 c 2 182000 b Rotor & Shaft 262022 c 2 262024 a Bearing Locknut 903523 c 2 903541 c Bearing Lockwasher 903524 c 1 903542 c

1 Included in Maintenance Kit and Rebuild Kit 2 Included in Rebuild Kit Reference: a = Interchangeable, but requires new Bearing Locknuts PN 903541 and Bearing Lockwasher PN 903542. These are included whe ordering Rotor & Shaft PN 262024. b = Interchangeable but requires new push rods PN 122005. c = Not Interchangeable OPTIONAL HYDRAULIC MOTOR ADAPTER PARTS

Ref. No. Part Name

Parts Per

Pump Part No.

See Below Hydraulic Motor Adapter Kit * See

Below 892037









* Hydraulic Motor Adapter Kits shipped prior to Spring 2002 were of a two piece design – refer to page 206-C00.

BLACKMER PUMP PARTSPUMP MODEL: TLGLF4A, TLGLF4 (CONTINUED)

H

- 82 -


GOLDSBORO, NC (800) 426-9293

BLACKMER PUMP PARTS

BLACKMER PARTS LIST PUMP MODEL: TLGLF4B

(See Instructions 501-E00 for Installation, Operation and Maintenance)


Parts Per

Pump Part No. Ref.


Pump Part No.

1 Cap - Relief Valve (R/V) 1 413952 42A O-Ring - Flange 1 701937 2 Adjusting Screw - R/V 1 436310 42B Capscrew - 3" NPT Flange 4 920663 3 Locknut - Adjusting Screw 1 432039 Capscrew - 3", 4" 920640 4 Cover - R/V 1 412001 Weld Flange; Blank Flange 5 Capscrews - R/V Cover 4 920663 TWIN DISCHARGE PORT OPTIONS 7 Spring Guide - R/V 1 426355 43 Flange - 2" NPT 2 652010 8 Spring - R/V 1 472039 Flange - 2" Weld 652024 9 Valve - R/V 1 452001 43A O-Ring - 2" NPT Flange 0 - 2 1 701919 10 O-Ring - R/V Cover 1 1 701946 O-Ring - 2" Weld Flange 0 - 2 1 702004 12 Casing 1 012041 43B Capscrew - Discharge Flange 8 920491 13 Rotor & Shaft Asy. 1 2 262041 71 Disc 2 1 062039 (includes Ref. No. 24A & 24B) 71A Machine Screw - Disc 8 2 920015

14 Vane - Duravane (Std.) 6 1 092019 71B Lockwasher - Machine Screw 8 2 909634 20 Head 2 032041 72 O-Ring - Head 2 1 702039 21 Capscrews - Head 28 920532 73 Gage Plug 2 908198 24 Ball Bearing 2 1 903166 74 Key - Liner 1 2 182040

24A Locknut - Bearing 2 2 903541 76 Grease Fitting 2 317815 24B Lockwasher - Bearing 2 1 903542 76A Grease Relief Fitting 2 701992 26 Gasket - Bearing Cover 2 1 385125 77 Push Rod 3 1 122009 27 Bearing Cover 2 041815 88 O-Ring - R/V Cap 1 1 701926 28 Capscrews - Bearing Cover 12 920286 104 Grease Seal 2 1 331908 35 Key - Shaft 1 1 909183 186 Shaft, Protector 1 341801 41 Liner 1 2 182000 Tool - Locknut 903092 AUXILIARY INTAKE OPTIONS Kit – Maintenance 899224

42 Flange - 3" NPT 1 652012 Kit – Rebuild 899124 Flange - 4" Weld 652005 Flange - 3" Weld 652007 Flange - Blank 652000

1 Included in Maintenance Kit and Rebuild Kit 2 Included in Rebuild Kit

Keep this parts list with Installation, Operation and Maintenance Instructions

LOCKNUT TOOL

H


BLACKMER PUMP PARTS

MECHANICAL SEAL

Ref. No. Part Name Parts Per

Pump Part No.

153 Mechanical Seal Assembly 2 1 332050 153A Stationary Seat (Hardened Steel) 2 ** 153B Seal Face (Carbon) 2 ** 153C Jacket Assembly 2 ** 153D O-Ring - Stationary (Buna-N) 2 701934 153E O-Ring - Rotating (Buna-N) 2 711912

1 Included in Maintenance Kit and Rebuild Kit ** NOTE: Mechanical Seal Assy. (Ref. 153) is only sold as a complete assembly. Ref. Nos. 153A, 153B & 153C are not available as separate replacement parts.

TLGLF4 TLGLF4A

Interchangeability status w/TLGLF4A Interchangeability status w/TLGLF4 Part Name

PART NO. REF. PART NO. REF. Push Rods 122001 c 1 122005 c Liner 182039 c 2 182000 b Rotor & Shaft 262022 c 2 262024 a Bearing Locknut 903523 c 2 903541 c Bearing Lockwasher 903524 c 1 903542 c

1 Included in Maintenance Kit and Rebuild Kit 2 Included in Rebuild Kit Reference: a = Interchangeable, but requires new Bearing Locknuts PN 903541 and Bearing Lockwasher PN 903542. These are included whe ordering Rotor & Shaft PN 262024. b = Interchangeable but requires new push rods PN 122005. c = Not Interchangeable OPTIONAL HYDRAULIC MOTOR ADAPTER PARTS

Ref. No. Part Name

Parts Per

Pump Part No.

See Below Hydraulic Motor Adapter Kit * See

Below 892037









* Hydraulic Motor Adapter Kits shipped prior to Spring 2002 were of a two piece design – refer to page 206-C00.

PUMP MODEL : TLGLF4B (CONTINUED)

H

- 84 -


GOLDSBORO, NC (800) 426-9293

Hydraulic Drive SystemBlackmer’s HYDRIVE is a filly integrated hydraulic drive system. Atypical system includes a P.T.O., hydraulic pump, Hydrive cooler/controller, pump control valve, speed control valve, and mountinghardware. Hydraulic motor adapter kits are available to retrofitexisting Blackmer pumps for hydraulic drive operation. Each systemis factory engineered to fit your application.

Compressors, Hydraulic Drive, Motors, StartersCOMPRESSORS/MOTORS

KECF212EXPLOSION PROOFFLEXIBLE CONNECTORFor connecting wiring to motor ona pump unit so motor can be adjusted3/4” x 12”

COMPRESSORS MOTORS/STARTERS/SWITCHES

EXPLOSION PROOF MOTORSClass 1, Group D (60 cycle), 1750 RMP

Item # Approx. Liquid Transfer Rate Motor Size

LB161 90 GPM @ 780 RPM 7.5 HP

LB361 194 GPM @ 780 RPM 15 HP

LB601 351 GPM @ 790 RPM 25 HP

LB942 640 GPM @ 750 RPM 40 HP

BLACKMER OIL-FREECOMPRESSORSBlackmer offers a var iety of factoryassembled compressor packages to fit mostapplication requirements. Standard basemounted units are available in a variety ofstyles.

KRUG HAND PUMPOperates on the simple principle of theautomotive piston. Used for filling 20#cylinders, lift truck cylinders, etc.Inlet: 1” FNPTOutlet: 3/4” FNPTCapacity: 6 GPM at 40 strokes/min.

Item # Description

KHP Hand pump

K-HP-HK Connecting hose kit

KRUG VAPOR COMPRESSORS• Has LP Gas fueled engine (uses LP

being transferred as fuel)• 20 GPM transfer rate• 1/2” FNPT connections

Item # Description

K-VP-LP Compressor with LP engine

K-VP-HK Connecting hose kit

K16771B Replacement Compressor

K209870 3/4” replacement clutch

K3X927 Replacement pulley EXPLOSION PROOFSTARTERSClass 1, Group D (60 cycle)NEMA Type 3R, 7, & 9

MAGNETIC STARTERSare designed for full voltage starting ofmotors. All Bulletin 509 starters areequipped with manual reset overloadrelays and may be operated by remotepush button control. Protects motor fromthermal overload and undervoltage.Push button in cover.

Item # Size Voltage Phase Max HP

B509BHXD-1 1 115 1 2

B509BHXA-1 1 230 1 3

B509XHXD-1 1P 115 1 3

B509XHXA-1 1P 230 1 5

B509BHA-1 1 230 3 71/2

B509BHB-1 1 460 3 10

B509CHA-1 2 230 3 15

B509CHB-1 2 460 3 25

Item # HP Phase Voltage

AXPD010C1B* 1 1 115/230

AXPD015C1B* 1 1/2 1 115/230

AXP015C3B* 1 1/2 3 230/460

AXP020T3B 2 3 230/460

AXPB03T1B 3 1 230

AXP030T3B 3 3 230/460

AXPD05T1B 5 1 230

AXP050T3B 5 3 230/460

AXP075T3B 7 1/2 3 230/460

AXP100T3B 10 3 230/460

AXP150T3B 15 3 230/460

AXP250T3B 25 3 230/460

*C-Face Mount

LOVEJOY COUPLINGS0300010 - 7/8” L0950300020 - 1 1/8” L0950300060 - spider for L095

H


STARTERS/SWITCHES (CONTINUED)

90028-1011” LIQUID PROPANE METERDesigned for metering small quantities ofliquid propane into portable containersand engine fuel tanks. Complete withstrainer, vapor eliminator, & differentialvalves.Flow Range: 3 to 18 gpm.

VEEDER-ROOT PRINTINGREGISTERReplace your Neptune register with along lasting Veeder-Root Register

ITEM# DESCRIPTION

L789002-002 Printing Register

L886201-001 Adaptor to fit 1 1/4” to 2” Neptune without ATC

L886205-001 Adaptor to fit 1 1/4” to 2” Neptune with ATC

STARTERS/METERSManual Starters, Liquid & Vapor Meters

M250TC METRIS VAPORMETERThis 3/4” meter will meter 400,000 BTUat 11” W.C. and up to 1,200,000 BTU of5 psig inlet pressure (max.). It has a directread CFU index. 2/3” connections.Larger sizes are available.

K1222Toggle switch only for KXS52C.

E4000 - NEPTUNEELECTRONIC REGISTERReplace your Bobtail’s Neptune orVeeder-Root mechanical register withthis easy to use electronic register.

• To install an E4000 on a 1 1/2” Neptune meter, use a 201072-0011 1/2” adaptor plate.

• To install an E4000 on a LC meter,you need:

1000678 KitLC499988 Strainer coverLC81256 ThermowellLC06854 O-ring

METERS

METERS(CONTINUED)

MANUAL STARTERS

Designed for use where remote control isnot required and where undervoltageprotection is not needed. The motor isstarted at full line voltage. Thermal typeoverload protection is provided. START/STOP push buttons in cover.

Item # Size Voltage Phase Max HP

115V 230V 460V

B609AHX 0 115/230 1 1 2 --

B609BHX 1 115/230 1 2 3 --

B609XHX 1P 115/230 1 3 5 --

B609AHW 0 230/460 3 -- 3 5

B609BHW 1 230/460 3 -- 7 1/2 10

Class 1, Group D (60 Cycle) NEMA Type 3R, 7 and 9

B800H-2HA7REMOTE PUSH BUTTONSTATIONProvides remote operation of magneticstartersClass 1, Group D (60 Cycle) NEMA Type3R, 7 and 9

KXS52C OFF/ON SWITCHFor use with 1 and 1-1/2 HP explosionproof motors.

Class 1, Group D (60 Cycle) NEMA

Type 3R, 7 and 9

EPSON SLIP PRINTERTM-U295-071

METER SEALS

Item # Description

163-057-510 18” Seal Wire

163-057-510S 18” Seal Wire with lead seals

NEPTUNE CORIOLIS MASSFLOW LIQUID METERSFor bulk plants and bobtails. The Coriolisreduces LP Gas under-measurement, andcompared to traditional mechanical flowmeters, the Coriolis offers better accuracywith higher flow rates over a longerservice life. When combined with theNeptune E4000 Register, the Coriolisallows an upgrade path not obtainablewith competitive electronic transactionmanagement systems. Featureselectronic temperature compensationand the availability of combining withhand helds. Available in sizes from 12 -70 GPM.

H

- 86 -


GOLDSBORO, NC (800) 426-9293

Neptune & Liquatech Meter PartsMETER PARTS

NEPTUNE/LIQUA-TECH METER PARTS

DESCRIPTION PART #

3/4” and 1” Meter 3/4” 1”Gasket, Main Case L4861-016 L4861-016

Measuring Chamber, Complete L42075-101 L42075-101

Gasket, O-Ring, Vapor Release Cover L100139-012 L100139-012

Strainer Assembly L100683-001 L100683-001

Seal, Differential Valve, U-Cup L100025-008 L100025-008

O-Ring, Inlet/Outlet, Differential Valve L100139-007 L100139-007

Differential Valve Repair Kit L100028-011 L100028-011

11/4”, 11/2”, and 2” Meter 1 1/4” 1 1/2” 2”Stud, Register Mounting L84435-000 L84435-000 L84435-000

Gasket, Main Case L4862-008 L4862-008 L84806-000

Measuring Chamber, Complete L43260-101 L83271-101 L45806-101

Star Connection L82976-001 L82976-001 L82976-001

Gear Train, Complete L83501-000 L84981-000 L83502-000

Seal, U-Cup Shaft L100025-002 L100025-002 L100025-002

Vapor Release and Strainer 1 1/2” 2”Gasket, O-Ring. Vapor Release Cover L100139-022 L100139-022

Main Valve, Complete L89274-006 L89274-006

Piston, Seal L83179-000 L83179-000

Float, Complete L82476-001 L82476-001

Strainer and Gasket Assembly L101433-704

Strainer, Inner and Outer Combo L101462-003

Inlet Check Valve, Complete L84983-704 L84813-702

Gasket, O-Ring, Strainer Cover L100139-010 L84818-000

Differential Valve 1 1/2” 2”Diaphragm L83771-002 L83771-002

O-Ring L100139-001 L100139-001

Gasket, Flange L82060-000 L84818-000

Temperature Compensator 1 1/4” 1 1/2” 2”Gear Train, Complete L83501-000 L84981-000 L83502-000

Seal, U-Cup Shaft L100025-002 L100025-002 L100025-002

Adapter Unit, Complete L86602-005 L86602-005 L86602-005

Stud, Regoster Mounting L84435-000 L84435-000 L84435-000

Rollpin L100370-003 L100370-003 L100370-003

Drive Fork L84192-006 L84192-006 L84192-006

Neptune Registers Part#600 Series Register (for 3/4” meter) 100498-009

833 Printer Register 880030-000

601 Series Register (for 1” meter) 100498-016

H

BLACKMER PARTS CATALOG MODEL LGLD2E

Documents

Transcript of BLACKMER PARTS CATALOG MODEL LGLD2E