Biostar 945GC M7 TE Manual

7/25/2019 Biostar 945GC M7 TE Manual

1/49

945GC-M7 TE Setup Manual

FCC Information and Copyright

This equipment has been tested and found to comply with the limits of a ClassB digital device, pursuant to Part 15 of the FCC Rules. These limits are designedto provide reasonable protection against harmful interference in a residentialinstallation. This equipment generates, uses, and can radiate radio frequencyenergy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. There is no guaranteethat interference will not occur in a particular installation.

The vendor makes no representations or warranties with respect to thecontents here and specially disclaims any implied warranties of merchantabilityor fitness for any purpose. Further the vendor reserves the right to revise thispublication and to make changes to the contents here without obligation tonotify any party beforehand.

Duplication of this publication, in part or in whole, is not allowed without firstobtaining the vendors approval in writing.

The content of this users manual is subject to be changed without notice andwe will not be responsible for any mistakes found in this users manual. All thebrand and product names are trademarks of their respective companies.


2/49

Table of Contents

Chapter 1: Introduction ........................................ 11.1 Before You Start ................................................................................ 1

1.2 Package Checklist ............................................................................. 1

1.3 Motherboard Features...................................................................... 2

1.4 Rear Panel Connectors ..................................................................... 3

1.5 Motherboard Layout......................................................................... 4

Chapter 2: Hardware Installation .......................... 52.1 Installing Central Processing Unit (CPU) ....................................... 5

2.2 FAN Headers...................................................................................... 72.3 Installing System Memory ................................................................ 8

2.4 Connectors and Slots ....................................................................... 10

Chapter 3: Headers & Jumpers Setup .................. 123.1 How to Setup Jumpers .................................................................... 12

3.2 Detail Settings .................................................................................. 12

Chapter 4: Useful Help ........................................ 194.1 Driver Installation Note.................................................................. 19

4.2 Award BIOS Beep Code .................................................................. 20

4.3 Extra Information............................................................................ 20

4.4 Troubleshooting............................................................................... 21

Chapter 5: WarpSpeeder III ............................. 22

5.1 Introduction...................................................................................... 22

5.2 System Requirement ....................................................................... 22

5.3 Installation....................................................................................... 23

5.4 WarpSpeeder III............................................................................. 24

Appendencies: SPEC In Other Language .............. 30German.................................................................................................................. 30

France .................................................................................................................... 32

Italian..................................................................................................................... 34

Spanish................................................................................................................... 36

Portuguese ............................................................................................................ 38

Polish...................................................................................................................... 40

Russian ................................................................................................................... 42

Arabic..................................................................................................................... 44

Japanese ................................................................................................................ 46


3/49

945GC-M7 TE

1

CHAPTER 1: INTRODUCTION

1.1 BEFORE YOU STARTThank you for choosing our product. Before you start installing themotherboard, please make sure you follow the instructions below:

Prepare a dry and stable working environment withsufficient lighting.

Always disconnect the computer from power outletbefore operation.

Before you take the motherboard out from anti-staticbag, ground yourself properly by touching any safelygrounded appliance, or use grounded wrist strap toremove the static charge.

Avoid touching the components on motherboard or therear side of the board unless necessary. Hold the boardon the edge, do not try to bend or flex the board.

Do not leave any unfastened small parts inside thecase after installation. Loose parts will cause shortcircuits which may damage the equipment.

Keep the computer from dangerous area, such as heatsource, humid air and water.

1.2 PACKAGE CHECKLIST

HDD Cable X 1

Rear I/O Panel for ATX Case X 1

Installation Guide X 1

Fully Setup Driver CD X 1 (full version manual files inside)

Serial ATA Cable X 1

FDD Cable X 1 (optional)

Serial ATA Power Cable X 1 (optional)

USB 2.0 Cable X1 (optional)S/PDIF out Cable X 1 (optional)

Note:The package contents may differ by area or your motherboard version.


4/49

Motherboard Manual

2

1.3 MOTHERBOARD FEATURESSPEC

CPU

LGA 775

Intel Core2Duo / Pentium 4 / Pentium D /

Celeron D / Celeron 4xx processor up to 3.8

GHz *It is recommended to use processors

with 95W power consumption.

Supports Hyper-Threading

Execute Disable Bit

Enhanced Intel SpeedStep

Extended Memory 64 Technology

FSB 533 / 800 / 1066 / 1333 MHz

Chipset

Intel 945GC

Intel ICH7

Graphics Intel GMA 950 Max Shared Video Memory is 224MB

Super I/O

ITE IT8712F

Provides the most commonly used legacy

Super I/O functionality.

Low Pin Count Interface

Environment Control initiatives,

H/W Monitor

Fan Speed Controller

ITE's "Smart Guardian" function

Main

Memory

DIMM Slots x 2

Each DIMM supports 256/512MB & 1GB

DDR2

Max Memory Capacity 2GB

Supports DDR2 400 / 533 / 667

Dual Channel Mode DDR2 memory module

Registered DIMM and ECC DIMM is not supported

IDE Integrated IDE ControllerUltra DMA 33 / 66 / 100 Bus Master Mode

supports PIO Mode 0~4,

SATA Integrated Serial ATA ControllerData transfer rates up to 3.0 Gb/s.

SATA Version 2.0 specification compliant.

LAN Atheros L210 / 100 Mb/s auto negotiation

Half / Full duplex capability

Sound

CodecALC662

5.1 channels audio out

High-Definition Audio support

PCI Express x16 slot x1 Supports PCI-E x16 expansion cards

PCI Express x1 slot x1 Supports PCI-E x1 expansion cardsSlots

PCI slot x2 Supports PCI expansion cards

Floppy connector x1 Each connector supports 2 Floppy drives

IDE Connector x1 Each connector supports 2 IDE device

Printer Port Connector x1 Each connector supports 1 Printer port

On Board

Connector

SATA Connector x4 Each connector supports 1 SATA devices


5/49

945GC-M7 TE

3

SPEC

Front Panel Connector x1 Supports front panel facilities

Front Audio Connector x1 Supports front panel audio function

CD-in Connector x1 Supports CD audio-in function

S/PDIF out connector x1 Supports digital audio out function

CPU Fan header x1 CPU Fan power supply (with Smart Fan function)

System Fan header x1 System Fan Power supply

Clear CMOS header x1 Restore CMOS data to factory default

USB connector x2 Each connector supports 2 front panel USB ports

Power Connector (24pin) x1 Connects to Power supply

Power Connector (4pin) x1 Connects to Power supply

Back Panel

I/O

PS/2 Keyboard x1

PS/2 Mouse x1

Serial Port x1

VGA port x1

LAN port x1

USB Port x4

Audio Jack x3

Connects to PS/2 Keyboard

Connects to PS/2 Mouse

Provide RS-232 Serial connection

Connects to monitor.

Connects to RJ-45 ethernet cable

Connects to USB devices

Provide Audio-In/Out and microphone connection

Board Size 190 (W) x 239 (L) mm Micro ATX form Factor

OS Support Windows 2000 / XP / VISTA Biostar Reserves the right to add or remove supportfor any OS with or without notice.

1.4 REAR PANEL CONNECTORS

VGA1

PS/2Mouse

PS/2Keyboard

COM1 USBX2USBX2

LA NLine In/Surround

Line Out

Mic In 1/Bass/ Center

Since the audio chip supports High Definition Audio Specification, the function of each audio

jack can be defined by software. The input / output function of each audio jack listed aboverepresents the default setting. However, when connecting external microphone to the audio

port, please use the Line In (Blue) and Mic In (Pink) audio jack.


6/49

Motherboard Manual

4

1.5 MOTHERBOARD LAYOUT

DDR2_

A1

DDR2_

B1

FDD1

PEX1_1

PEX16_1

PCI1

PCI2

JPANEL1JUSB4JUSB3

JATXPWR1

JCFAN1

SATA1

SATA3

SATA2

SATA4

Codec

JCDIN1

JSFAN1

LAN

BAT1

IntelICH7

LGA775

CPU1

Intel945GC

JAUDIOF1

JKBMS1

JUSB2

JRJ45USB1

CO

M1

JCO

M1

JVGA1

JSPDIF_OUT1

IDE1

JUSBV2JPRNT1

JATXPWR2

JAUDIO1

BIOS

DVIJ1(Optional)

JCMOS1

JUSBV1

Note:represents the 1stpin.


7/49

945GC-M7 TE

5

CHAPTER 2: HARDWARE INSTALLATION

2.1 INSTALLING CENTRAL PROCESSING UNIT (CPU)

Special Notice:

Remove Pin Cap before installation, and make good preservationfor future use. When the CPU is removed, cover the Pin Cap on theempty socket to ensure pin legs wont be damaged.

Pin-Cap

Step 1: Pull the socket locking lever out from the socket and then raise

the lever up to a 90-degree angle.


8/49

Motherboard Manual

6

Step 2:Look for the triangular cut edge on socket, and the golden dot on

CPU should point forwards this triangular cut edge. The CPU willfit only in the correct orientation.

Step 2-1:

Step 2-2:

Step 3:Hold the CPU down firmly, and then lower the lever to locked

position to complete the installation.

Step 4:Put the CPU Fan and heatsink assembly on the CPU and buckle it

on the retention frame. Connect the CPU FAN power cable intothe JCFAN1. This completes the installation.


9/49

945GC-M7 TE

7

2.2 FANHEADERSThese fan headers support cooling-fans built in the computer. The fancable and connector may be different according to the fan manufacturer.Connect the fan cable to the connector while matching the black wire topin#1.

JCFAN1: CPU Fan Header

Pin Assignment

1 Ground2 +12V

3 FAN RPM ratesense

1

4

4 Smart FanControl

JSFAN1: System Fan Header

Pin Assignment

1 Ground

2 +12V1

3

3 FAN RPM rate

sense

Note:

The JCFAN1 and JSFAN1 support 4-pin and 3-pin head connector. When connectingwith wires onto connectors, please note that the red wire is the positive and should be

connected to pin#2, and the black wire is Ground and should be connected to GND.


10/49

Motherboard Manual

8

2.3 INSTALLING SYSTEM MEMORY

A. DDR2 Module

DDR2_

B1

DDR2_

A1

1. Unlock a DIMM slot by pressing the retaining clips outward. Align aDIMM on the slot such that the notch on the DIMM matches thebreak on the Slot.

2. Insert the DIMM vertically and firmly into the slot until the retainingchip snap back in place and the DIMM is properly seated.


11/49

945GC-M7 TE

9

B. Memory Capacity

DIMM SocketLocation

DDR2 Module Total Memory Size

DDR2_A1 256MB/512MB/1GB *1

DDR2_B1 256MB/512MB/1GB *1Max memory 2GB.

C. Dual Channel Memory InstallationTo trigger the Dual Channel function of the motherboard, the memory modulemust meet the following requirements:

Install memory module of the same density in pairs, shown in the followingtable.

Dual Channel Status DDR2_A1 DDR2_B1

Disabled O X

Disabled X O

Enabled O O

(O means memory installed, X means memory not installed.)

The DRAM bus width of the memory module must be the same (x8 orx16)

D. FSB Supporting TableAccording to the FSB frequency of the installed CPU, the motherboard couldsupport DDR2 400/533/667 modules. Please refer to the table below to findout the proper RAM module that fits the FSB of the installed CPU.

FSB of CPU

DDR2 ModuleFSB 533 FSB 800 FSB 1066 FSB1333

DDR2 400 O O O X

DDR2 533 O O O O(500)

DDR2 667 O O O O

DDR2 800(compatible) O(667) O(667) O(667) O(667)

(O means supported, X means not supported.)


12/49

Motherboard Manual

10

2.4 CONNECTORS AND SLOTS

FDD1: Floppy Disk Connector

The motherboard provides a standard floppy disk connector that supports 360K,720K, 1.2M, 1.44M and 2.88M floppy disk types. This connector supports theprovided floppy drive ribbon cables.

1

234

33

IDE1: Hard Disk Connectors

The motherboard has a 32-bit Enhanced PCI IDE Controller that provides PIOMode 0~4, Bus Master, and Ultra DMA 33/66/100 functionality.

The IDE connector can connect a master and a slave drive, so you can connectup to two hard disk drives.

40

2 1

39


13/49

945GC-M7 TE

11

PEX16_1: PCI-Express x16 Slot

- PCI-Express 1.0a compliant.

- Maximum theoretical realized bandwidth of 4GB/s simultaneously perdirection, for an aggregate of 8GB/s totally.

PEX1_1: PCI-Express x1 Slot

- PCI-Express 1.0a compliant.

- Data transfer bandwidth up to 250MB/s per direction; 500MB/s in total.

- PCI-Express supports a raw bit-rate of 2.5Gb/s on the data pins.

- 2X bandwidth over the traditional PCI architecture.

PEX1_1

PEX16_1

PCI1~PCI2: Peripheral Component Interconnect Slots

The motherboard is equipped with 2 standard PCI slots. PCI stands forPeripheral Component Interconnect, and it is a bus standard for expansioncards. This PCI slot is designated as 32 bits.

PCI1

PCI2


14/49

Motherboard Manual

12

CHAPTER 3: HEADERS & JUMPERS SETUP

3.1 HOW TO SETUP JUMPERSThe illustration shows how to set up jumpers. When the jumper cap isplaced on pins, the jumper is close, if not, that means the jumper isopen.

Pin opened Pin closed Pin1-2 closed

3.2 DETAIL SETTINGS

JPANEL1: Front Panel Header

This 16-pin connector includes Power-on, Reset, HDD LED, Power LED, Sleepbutton, and speaker connections. It allows user to connect the PC cases frontpanel switch functions.

1

SLPPWR_LED

ON/OFF

RST

HLED

SPK

+ +

+

9-

-8

16

Pin Assignment Function Pin Assignment Function

1 +5V 9 Sleep control

2 N/A 10 GroundSleep button

3 N/A 11 N/A N/A

4 Speaker

SpeakerConnector

12 Power LED (+)

5 HDD LED (+) 13 Power LED (+)

6 HDD LED (-)

Hard driveLED 14 Power LED (-)

Power LED

7 Ground 15 Power button

8 Reset controlReset button

16 GroundPower-on button


15/49

945GC-M7 TE

13

JATXPWR1: ATX Power Source Connector

This connector allows user to connect 24-pin power connector on the ATXpower supply.

Pin Assignment

1 +3.3V

2 +3.3V

3 Ground

4 +5V

5 Ground

6 +5V

7 Ground

8 PW_OK

9 StandbyVoltage +5V

10 +12V

11 +12V

12 2 x 12 Detect

13 +3.3V

14 -12V

15 Ground

16 PS_ON

17 Ground

18 Ground

19 Ground

20 -5V

21 +5V

22 +5V

23 +5V

1

12

13

24

24 Ground

JATXPWR2: ATX Power Source Connector

By connecting this connector, it will provide +12V to CPU power circuit.

Pin Assignment

1 +12V

2 +12V

3 Ground

1 2

34

4 Ground


16/49

Motherboard Manual

14

JUSB3/JUSB4: Headers for USB 2.0 Ports at Front Panel

This motherboard provides 2 USB 2.0 headers, which allows user to connectadditional USB cable on the PC front panel, and also can be connected withinternal USB devices, like USB card reader.

Pin Assignment

1 +5V (fused)

2 +5V (fused)

3 USB-

4 USB-

5 USB+

6 USB+

7 Ground

8 Ground

9 Key19

210

JUSB4JUSB3

10 NC

SATA1~SATA4: Serial ATA Connectors

The motherboard has a PCI to SATA Controller with 4 channels SATA interface,it satisfies the SATA 2.0 spec and with transfer rate of 3Gb/s.

Pin Assignment

1 Ground

2 TX+

3 TX-

4 Ground

5 RX-

6 RX+1 4 7

SATA4

SATA2SATA3

SATA1

7 Ground


17/49

945GC-M7 TE

15

JSPDIF_OUT1: Digital Audio out Connectors

This connector allows user to connect the PCI bracket SPDIF output header.

Pin Assignment

1 +5V

2 SPDIF_OUT1

13

3 Ground

JAUDIOF1: Front Panel Audio Header

This header allows user to connect the front audio output cable with the PC frontpanel. It will disable the output on back panel audio connectors.

Pin Assignment

1 Mic Left in2 Ground

3 Mic Right in

4 GPIO

5 Right line in

6 Jack Sense

7 Front Sense

8 Key

9 Left line in

10 Jack Sense19

210


18/49

Motherboard Manual

16

JCDIN1: CD-ROM Audio-in Connector

This connector allows user to connect the audio source from the variaty devices,like CD-ROM, DVD-ROM, PCI sound card, PCI TV turner card etc..

Pin Assignment

1 Left ChannelInput

2 Ground

3 Ground

14

4 Right ChannelInput

JCMOS1: Clear CMOS Header

By placing the jumper on pin2-3, it allows user to restore the BIOS safe settingand the CMOS data, please carefully follow the procedures to avoid damagingthe motherboard.

1 3

Pin 1-2 Close:Normal Operation (Default).

1 3

1 3

Pin 2-3 Close:

Clear CMOS data.

Clear CMOS Procedures:

1. Remove AC power line.

2. Set the jumper to Pin 2-3 close.

3. Wait for five seconds.4. Set the jumper to Pin 1-2 close.

5. Power on the AC.

6. Reset your desired password or clear the CMOS data.


19/49

945GC-M7 TE

17

DVIJ1: Connector for DVI Daughter Card Adapter (Optional)

This connector is for the specific DVI adapter, which is equipped with a DVI-Dconnector. With the adapter you can use the DVI-D interface for a betterdisplay quality. Moreover, the original D-SUB and the additional DVI-D can beutilized simultaneously, so two panels can disaply simultaneously.

1

2

27

28

JUSBV1/JUSBV2: Power Source Headers for USB Ports

Pin 1-2 Close:

JUSBV1: +5V for USB ports at JRJ45USB1/JUSB2.

JUSBV2: +5V for USB ports at front panel (JUSB3/JUSB4).

Pin 2-3 Close:

JUSBV1: USB ports at JRJ45USB1/JUSB2 are powered by +5V standbyvoltage.

JUSBV2: USB ports at front panel (JUSB3/JUSB4) are powered by +5Vstandby voltage.

13

Pin 1-2 close

13

1

3

JUSBV1

JUSBV2

13

Pin 2-3 close

Note:

In order to support this function Power-On system via USB device, JUSBV1/ JUSBV2jumper cap should be placed on Pin 2-3 individually.


20/49

Motherboard Manual

18

JPRNT1: Printer Port Connector

This header allows you to connector printer on the PC.

125

2

Pin Assignment Pin Assignment

1 -Strobe 14 Ground

2 -ALF 15 Data 6

3 Data 0 16 Ground

4 -Error 17 Data 7

5 Data 1 18 Ground

6 -Init 19 -ACK

7 Data 2 20 Ground8 -Scltin 21 Busy

9 Data 3 22 Ground

10 Ground 23 PE

11 Data 4 24 Ground

12 Ground 25 SCLT

13 Data 5 26 Key


21/49

945GC-M7 TE

19

CHAPTER 4: USEFUL HELP

4.1 DRIVER INSTALLATION NOTEAfter you installed your operating system, please insert the Fully SetupDriver CD into your optical drive and install the driver for better systemperformance.

You will see the following window after you insert the CD

The setup guide will auto detect your motherboard and operating system.Note:If this window didnt show up after you insert the Driver CD, p lease use file browser to

locate and execute the fileSETUP.EXE under your optical drive.

A. Driver InstallationTo install the driver, please click on the Driver icon. The setup guide willlist the compatible driver for your motherboard and operating system.Click on each device driver to launch the installation program.

B. Software InstallationTo install the software, please click on the Software icon. The setup guidewill list the software available for your system, click on each software titleto launch the installation program.

C. ManualAside from the paperback manual, we also provide manual in the DriverCD. Click on the Manual icon to browse for available manual.

Note:

You wil l need Acrobat Reader to open the manual fi le. Please download the latest version

of Acrobat Reader software fromhttp://www.adobe.com/products/acrobat/readstep2.html


22/49

Motherboard Manual

20

4.2 AWARD BIOSBEEP CODEBeep Sound Meaning

One long beep followed by two shortbeeps

Video card not found or video cardmemory bad

High-low siren sound CPU overheated

System will shut down automatically

One Short beep when system boot-up No error found during POST

Long beeps every other second No DRAM detected or install

4.3 EXTRA INFORMATION

CPU Overheated

If the system shutdown automatically after power on system forseconds, that means the CPU protection function has been activated.

When the CPU is over heated, the motherboard will shutdownautomatically to avoid a damage of the CPU, and the system may notpower on again.

In this case, please double check:

1. The CPU cooler surface is placed evenly with the CPU surface.

2. CPU fan is rotated normally.

3. CPU fan speed is fulfilling with the CPU speed.

After confirmed, please follow steps below to relief the CPU0protection function.

1. Remove the power cord from power supply for seconds.

2. Wait for seconds.

3. Plug in the power cord and boot up the system.

Or you can:

1. Clear the CMOS data.

(See Close CMOS Header: JCMOS1 section)2. Wait for seconds.

3. Power on the system again.


23/49

945GC-M7 TE

21

4.4 TROUBLESHOOTINGProbable Solution

1. No power to the system at allPower light dont illuminate, faninside power supply does not turnon.

2. Indicator light on keyboard doesnot turn on.

1. Make sure power cable issecurely plugged in.

2. Replace cable.

3. Contact technical support.

System inoperative. Keyboard lightsare on, power indicator lights are lit,and hard drive is spinning.

Using even pressure on both ends ofthe DIMM, press down firmly until themodule snaps into place.

System does not boot from hard diskdrive, can be booted from optical drive.

1. Check cable running from disk todisk controller board. Make sureboth ends are securely pluggedin; check the drive type in thestandard CMOS setup.

2. Backing up the hard drive isextremely important. All harddisks are capable of breakingdown at any time.

System only boots from optical drive.Hard disk can be read and applicationscan be used but booting from hard diskis impossible.

1. Back up data and applicationsfiles.

2. Reformat the hard drive.Re-install applications and datausing backup disks.

Screen message says InvalidConfiguration or CMOS Failure.

Review systems equipment. Make surecorrect information is in setup.

Cannot boot system after installingsecond hard drive.

1. Set master/slave jumperscorrectly.

2. Run SETUP program and selectcorrect drive types. Call the drivemanufacturers for compatibilitywith other drives.


24/49

Motherboard Manual

22

CHAPTER 5: WARPSPEEDER III

5.1 INTRODUCTION

[WarpSpeeder III], a new powerful control utility, features threeuser-friendly functions including Overclock Manager, OvervoltageManager, and Hardware Monitor.

With the Overclock Manager, users can easily adjust the frequency theyprefer or they can get the best CPU performance with just one click. TheOvervoltage Manager, on the other hand, helps to power up CPU corevoltage and Memory voltage. The cool Hardware Monitor smartly indicatesthe temperatures, voltage and CPU fan speed as well as the chipset

information. Also, in the About panel, you can get detail descriptions aboutBIOS model and chipsets. In addition, the frequency status of CPU,memory, VGA and PCI along with the CPU speed are synchronicallyshown on our main panel.

Moreover, to protect users' computer systems if the setting is notappropriate when testing and results in system fail or hang,[WarpSpeeder III] technology assures the system stability byautomatically rebooting the computer and then restart to a speed that iseither the original system speed or a suitable one.

5.2 SYSTEM

REQUIREMENT

OS Support: Windows 98 SE, Windows Me, Windows 2000, Windows XP,Windows Vista

DirectX: DirectX 8.1 or above. (The Windows XP operating systemincludes DirectX 8.1. If you use Windows XP, you do not need to installDirectX 8.1.)


25/49

945GC-M7 TE

23

5.3 INSTALLATION

1. Execute the setup execution file, and then the following dialog will popup. Please click Next button and follow the default procedure toinstall.

2. When you see the following dialog in setup procedure, it means setupis completed. Click Finish button.

Usage:

The following figures are only for reference, the screen printed in thisuser manual will change according to your motherboard on hand.


26/49

Motherboard Manual

24

5.4 WARPSPEEDERIII

1. Desktop Icon

After the [WarpSpeeder III] has been installed, a [WarpSpeeder III]icon will appear on the desktop, just like the icon shown below.

Now you can launch the [WarpSpeeder III] utility simply bydouble-clicking the desktop icon.

2. Main Panel

If you double-click the desktop icon, [WarpSpeeder III] will belaunched. Please refer to the following figure; the utilitys first windowyou will see is Main Panel.

Main Panel contains features as follows:

a. Display the CPU Speed, CPU external clock, Memory clock, VGAclock, and PCI clock information.

b. Contains About, Voltage/Overclock, and Hardware MonitorButtons for invoking respective panels. The On/Off button is forclosing the program.


27/49

945GC-M7 TE

25

3. Overclock/Overvoltage Panel

Click the Overclock/Overvoltage button in the Main Panel, the buttonwill be highlighted and the Overclock/Overvoltage Panel will showup as the following figure. As you can see, the Overclock Panel ison the right side, and the Overvoltage Panel is on the left side.


28/49

Motherboard Manual

26

Overclock Panel contains these features:

a. Auto-Overclock:User can click this button and [WarpSpeeder III] will set the bestand stable performance and frequency automatically. A warningdialog as below will show up to notify you that the system maybecome unstable, click on OK to proceed.

Then [WarpSpeeder III] utility will execute a series of testinguntil system fail. Then system will do fail-safe reboot by usingWatchdog function. After reboot, launch the [WarpSpeeder III]utility again and the utility will load the previously verified best andstable frequency.

b. Verify:

If you use the Manual Adjust bar to adjust the CPU frequency,then you can click this button and [WarpSpeeder III] will proceeda testing for current frequency. If the testing is ok, then the currentfrequency will be saved into system registry. If the testing fails,system will do a fail-safe rebooting. After reboot, the[WarpSpeeder III] utility will restore to the hardware defaultsetting.

Warning:

Manually overclock is potentially dangerous, especially when theoverclocking percentage is over 110 %. We strongly recommend youverify every speed you overclock by click the Verify button. Or, you canjust click Auto overclock button and let [WarpSpeeder III]automatically gets the best result for you.

c. V3 Engine/V6 Engine/V9 Engine:Provide user the ability to do real-time overclock adjustment.

d. Recovery:Click this button and the [WarpSpeeder III] utility will restore allvalues to the hardware default setting.


29/49

945GC-M7 TE

27

Overvoltage Panel contains these features:

a. CPU Voltage:This function allows user to adjust CPU voltage. Click on + toincrease or - to decrease the CPU voltage.

b. Memory Voltage:This function allows user to adjust Memory voltage. Click on +to increase or - to decrease the Memory voltage.

4. Hardware Monitor PanelClick the Hardware Monitor button in Main Panel, the button will behighlighted and the Hardware Monitor panel will show up as thefollowing figure.

In this panel, you can get the real-time status information of yoursystem. The information will be refreshed every 1 second.


30/49

Motherboard Manual

28

5. About Panel

Click the about button in Main Panel, the button will be highlightedand the About Panel will show up as the following figure.

In this panel, you can get model name and detail information in hintsof all the chipset that are related to overclocking. You can also getthe the version number of [WarpSpeeder III] utility.

Note:

Because the overclock, overvoltage, and hardware monitor featuresare controlled by several separate chipset, [WarpSpeeder III]divide these features to separate panels. If one chipset is not onboard, the correlative button in Main panel will be disabled, but willnot interfere other panels functions. This property can make[WarpSpeeder III] utility more robust.


31/49

945GC-M7 TE

29

This page is intentionally left blank.


32/49

Motherboard Manual

30

APPENDENCIES: SPEC IN OTHER LANGUAGE

GERMANSpezifikationen

CPU

LGA 775


Celeron D / Celeron 4xx Prozessoren mit bis zu

3,8 GHz

*It is recommended to use processors with

95W power consumption.

Untersttzt Hyper-Threading

Execute Disable Bit



FSB 533 / 800 / 1066 / 1333 MHz

ChipsatzIntel 945GC

Intel ICH7

Grafik Intel GMA 950 Max. 224MB gemeinsam benutzter Videospeicher

Super E/A

ITE 8712F

Bietet die hufig verwendeten alten Super

E/A-Funktionen.

Low Pin Count-Schnittstelle

Umgebungskontrolle,

Hardware-berwachung

Lfterdrehzahl-Controller

"Smart Guardian"-Funktion von ITE

Arbeitsspeich

er

DDR2 DIMM-Steckpltze x 2

Jeder DIMM untersttzt 256/512MB & 1GB

DDR2

Max. 2GB Arbeitsspeicher

Untersttzt DDR2 400 / 533 / 667

Dual-Kanal DDR2 Speichermodul

registrierte DIMMs. ECC DIMMs werden nicht

untersttzt.

IDE Integrierter IDE-ControllerUltra DMA 33 / 66 / 100 Bus Master-Modus

Untersttzt PIO-Modus 0~4

SATA Integrierter Serial ATA-ControllerDatentransferrate bis zu 3Gb/s

Konform mit der SATA-Spezifikation Version 2.0

LAN Atheros L2

10 / 100 Mb/s Auto-Negotiation

Halb-/ Vollduplex-Funktion

Audio-Codec ALC6625.1-Kanal-Audioausgabe

Untersttzt High-Definition Audio

PCI Express x16 Steckplatz x1

PCI Express x 1-Steckplatz x1Steckpltze

PCI-Steckplatz x2


33/49

945GC-M7 TE

31

Spezifikationen

Diskettenlaufwerkanschluss x1 Jeder Anschluss untersttzt 2 Diskettenlaufwerke

IDE-Anschluss x1 Jeder Anschluss untersttzt 2 IDE-Laufwerke

Druckeranschluss Anschluss x1 Jeder Anschluss untersttzt 1 Druckeranschluss

SATA-Anschluss x4 Jeder Anschluss untersttzt 1 SATA-Laufwerk

Fronttafelanschluss x1 Untersttzt die Fronttafelfunktionen

Front-Audioanschluss x1 Untersttzt die Fronttafel-Audioanschlussfunktion

CD-IN-Anschluss x1 Untersttzt die CD Audio-In-Funktion

S/PDIF-Ausgangsanschluss x1 Untersttzt die digitale Audioausgabefunktion

CPU-Lfter-Sockel x1CPU-Lfterstromversorgungsanschluss (mit

Smart Fan-Funktion)

System-Lfter-Sockel x1 System-Lfter-Stromversorgungsanschluss

"CMOS lschen"-Sockel x1

USB-Anschluss x2Jeder Anschluss untersttzt 2

Fronttafel-USB-Anschlsse

Stromanschluss (24-polig) x1

Onboard-Ans

chluss

Stromanschluss (4-polig) x1

Rckseiten-E

/A

PS/2-Tastatur x1

PS/2-Maus x1

Serieller Anschluss x1

VGA-Anschluss x1

LAN-Anschluss x1

USB-Anschluss x4

Audioanschluss x3

Platinengre 190 mm (B) X 239 mm (L)

OS-Unterstt

zungWindows 2000 / XP / VISTA

Biostar behlt sich das Recht vor, ohne

Ankndigung die Untersttzung fr ein

Betriebssystem hinzuzufgen oder zu entfernen.


34/49

Motherboard Manual

32

FRANCESPEC

UC

LGA 775

Processeurs Intel Core2Duo / Pentium 4 /

Pentium D / Celeron D / Celeron 4xx jusqu' 3,8

GHz

*It is recommended to use processors with 95W

power consumption.

Prend en charge les technologies

Hyper-Threading

d'excution de bit de dsactivation

Intel SpeedStep optimise

de mmoire tendue 64

Bus frontal 533 / 800 / 1066 / 1333 MHz

ChipsetIntel 945GC

Intel ICH7

Graphiques Intel GMA 950 Mmoire vido partage maximale de 224 Mo

Super E/S

ITE 8712F

Fournit la fonctionnalit de Super E/S

patrimoniales la plus utilise.

Interface faible compte de broches

Initiatives de contrle environnementales,

Moniteur de matriel

Contrleur de vitesse de ventilateur

Fonction "Gardien intelligent" de l'ITE

Mmoire

principale

Fentes DDR2 DIMM x 2

Chaque DIMM prend en charge des DDR2 de

256/512 Mo et 1Go

Capacit mmoire maximale de 2 GoPrend en charge la DDR2 400 / 533 / 667

Module de mmoire DDR2 mode double voie

Les DIMM registres et DIMM avec code

correcteurs d'erreurs ne sont pas prises en

charge

IDE Contrleur IDE intgrMode principale de Bus Ultra DMA 33 / 66 / 100

Prend en charge le mode PIO 0~4,

SATA Contrleur Serial ATA intgr :Taux de transfert jusqu' 3 Go/s.

Conforme la spcification SATA Version 2.0

LAN Atheros L210 / 100 Mb/s ngociation automatique

Half / Full duplex capability

Codec audio ALC662Sortie audio 5.1 voies

Prise en charge de l'audio haute dfinition

PCI Express x16 Steckplatz x1

PCI Express x1 Steckplatz x1Fentes

Fente PCI x2

Connecteur de disquette x1Chaque connector prend en charge 2 lecteurs de

disquettes

Connecteur

embarqu

Connecteur IDE x1Chaque connecteur prend en charge 2

priphriques IDE


35/49

945GC-M7 TE

33

SPEC

Connecteur de Port d'imprimante x1Chaque connector prend en charge 1 Port

d'imprimante

Connecteur SATA x4Chaque connecteur prend en charge 1

priphrique SATA

Connecteur du panneau avant x1Prend en charge les quipements du panneau

avant

Connecteur Audio du panneau avant x1Prend en charge la fonction audio du panneau

avant

Connecteur d'entre CD x1 Prend en charge la fonction d'entre audio de CD

Connecteur de sortie S/PDIF x1Prend en charge la fonction de sortie audio

numrique

Embase de ventilateur UC x1Alimentation lectrique du ventilateur UC (avec

fonction de ventilateur intelligent)

Embase de ventilateur systme x1 Alimentation lectrique du ventilateur systme

Embase d'effacement CMOS x1

Connecteur USB x2Chaque connecteur prend en charge 2 ports USB

de panneau avant

Connecteur d'alimentation (24 broches) x1

Connecteur d'alimentation (4 broches) x1

E/S du

panneau

arrire

Clavier PS/2 x1

Souris PS/2 x1

Port srie x1

Port VGA x1

Port LAN x1

Port USB x4

Fiche audio x3

Dimensions

de la carte190mm (l) X 239 mm (H)

Support SE Windows 2000 / XP / VISTABiostar se rserve le droit d'ajouter ou de

supprimer le support de SE avec ou sans pravis.


36/49

Motherboard Manual

34

ITALIANSPECIFICA

CPU

LGA 775

Processore Intel Core2Duo / Pentium 4 /

Pentium D / Celeron D / Celeron 4xx fino a

3.8 GHz


power consumption.

Supporto di Hyper-Threading

Execute Disable Bit


Tecnologia Extended Memory 64

FSB 533 / 800 / 1066 / 1333 MHz

ChipsetIntel 945GC

Intel ICH7

Grafica Intel GMA 950 La memoria video condivisa massima di 224MB

Super I/O

ITE 8712F

Fornisce le funzionalit legacy Super I/O

usate pi comunemente.

Interfaccia LPC (Low Pin Count)

Funzioni di controllo dellambiente:

Monitoraggio hardware

Controller velocit ventolina

Funzione "Smart Guardian" di ITE

Memoria

principale

Alloggi DIMM DDR2 x 2

Ciascun DIMM supporta DDR2 256/512MB

e 1GB

Capacit massima della memoria 2GB

Supporto di DDR2 400 / 533 / 667

Modulo di memoria DDR2 a canale doppio

DIMM registrati e DIMM ECC non sono

supportati

IDE Controller IDE integratoModalit Bus Master Ultra DMA 33 / 66 / 100

Supporto modalit PIO Mode 0-4

SATA Controller Serial ATA integrato

Velocit di trasferimento dei dati fino a 3

Gb/s.

Compatibile specifiche SATA Versione 2.0.

LAN Atheros L2Negoziazione automatica 10 / 100 Mb/s

Capacit Half / Full Duplex

Codec

audioALC662

Uscita audio 5.1 canali

Supporto audio High-Definition (HD)

Fente PCI Express x16 x1

Fente PCI Express x1 x1Alloggi

Alloggio PCI x2


37/49

945GC-M7 TE

35

SPECIFICA

Connettore floppy x1 Ciascun connettore supporta 2 unit Floppy

Connettore IDE x1 Ciascun connettore supporta 2 unit IDE

Connettore Porta stampante x1Ciascun connettore supporta 1 Porta

stampante

Connettore SATA x4 Ciascun connettore supporta 1 unit SATA

Connettore pannello frontale x1 Supporta i servizi del pannello frontale

Connettore audio frontale x1 Supporta la funzione audio pannello frontale

Connettore CD-in x1 Supporta la funzione input audio CD

Connettore output SPDIF x1 Supporta la funzione doutput audio digitale

Collettore ventolina CPU x1Alimentazione ventolina CPU (con funzione

Smart Fan)

Collettore ventolina sistema x1 Alimentazione ventolina di sistema

Collettore cancellazione CMOS x1

Connettore USB x2Ciascun connettore supporta 2 porte USB

pannello frontale

Connettore alimentazione (24 pin) x1

Connettori

su scheda

Connettore alimentazione (4 pin) x1

I/O

pannello

posteriore

Tastiera PS/2 x1

Mouse PS/2 x1

Porta seriale x1

Porta VGA x1

Porta LAN x1

Porta USB x4

Connettore audio x3

Dimension

i scheda190 mm (larghezza) x 239 mm (altezza)

Sistemi

operativi

supportati

Windows 2000 / XP / VISTA

Biostar si riserva il diritto di aggiungere o

rimuovere il supporto di qualsiasi sistema

operativo senza preavviso.


38/49

Motherboard Manual

36

SPANISH

Especificacin

CPU

LGA 775

Procesador Intel Core2Duo / Pentium 4 /

Pentium D / Celeron D / Celeron 4xx hasta

3,8 GHz

*It is recommended to use processors with

95W power consumption.

Admite Hyper-Threading

Bit de deshabilitacin de ejecucin

Intel SpeedStep Mejorado

Tecnologa Extended Memory 64

FSB 533 / 800 / 1066 / 1333 MHz

Conjunto de

chips

Intel 945GC

Intel ICH7

Grficos Intel GMA 950 Memoria mxima de vdeo compartida de 224MB

Sper E/S

ITE 8712F

Le ofrece las funcionalidades heredadas de

uso ms comn Sper E/S.

Interfaz de cuenta Low Pin

Iniciativas de control de entorno,

Monitor hardware

Controlador de velocidad de ventilador

Funcin "Guardia inteligente" de ITE

Memoria

principal

Ranuras DIMM DDR2 x 2

Cada DIMM admite DDR2 de 256/512MB y

1GB

Capacidad mxima de memoria de 2GB

Admite DDR2 de 400 / 533 / 667

Mdulo de memoria DDR2 de canal Doble

No admite DIMM registrados o DIMM compatibles

con ECC

IDE Controlador IDE integradoModo bus maestro Ultra DMA 33 / 66 / 100

Soporte los Modos PIO 0~4.

SATA Controlador ATA Serie IntegradoTasas de transferencia de hasta 3 Gb/s.

Compatible con la versin SATA 2.0.

Red Local Atheros L2Negociacin de 10 / 100 Mb/s

Funciones Half / Full dplex

Cdecs de

sonidoALC662

Salida de sonido de 5.1 canales

Soporte de sonido Alta Definicin

Ranura PCI Express x16 X1

Ranura PCI Express x1 X1Ranuras

Ranura PCI X2


39/49

945GC-M7 TE

37

Especificacin

Conector disco flexible X1 Cada conector soporta 2 unidades de disco flexible

Conector IDE X1 Cada conector soporta 2 dispositivos IDE

Conector Puerto de impresora X1 Cada conector soporta 1 Puerto de impresora

Conector SATA X4 Cada conector soporta 1 dispositivos SATA

Conector de panel frontal X1 Soporta instalaciones en el panel frontal

Conector de sonido frontal X1 Soporta funciones de sonido en el panel frontal

Conector de entrada de CD X1 Soporta funcin de entrada de sonido de CD

Conector de salida S/PDIF X1 Soporta funcin de salida de sonido digital

Cabecera de ventilador de CPU X1Fuente de alimentacin de ventilador de CPU (con

funcin Smart Fan)

Cabecera de ventilador de sistema X1 Fuente de alimentacin de ventilador de sistema

Cabecera de borrado de CMOS X1

Conector USB X2 Cada conector soporta 2 puertos USB frontales

Conector de alimentacin X1

(24 patillas)

Conectores

en placa

Conector de alimentacin X1

(4 patillas)

Panel

trasero de

E/S

Teclado PS/2 X1

Ratn PS/2 X1

Puerto serie X1

Puerto VGA X1

Puerto de red local X1

Puerto USB X4

Conector de sonido X3

Tamao de

la placa190 mm. (A) X 239 mm. (H)

Soporte de

sistema

operativo

Windows 2000 / XP / VISTABiostar se reserva el derecho de aadir o retirar el

soporte de cualquier SO con o sin aviso previo.


40/49

Motherboard Manual

38

PORTUGUESEESPECIFICAES

CPU

LGA 775

Processador Intel Core2Duo / Pentium 4 /

Pentium D / Celeron D / Celeron 4xx at 3,8 GHz


power consumption.

Suporta as tecnologias Hyper-Threading

Execute Disable Bit


Extended Memory 64

FSB 533 / 800 / 1066 / 1333 MHz

ChipsetIntel 945GC

Intel ICH7

Placa

grficaIntel GMA 950 Memria de vdeo mxima partilhada: 224 MB

Especifica

o Super I/O

ITE 8712F

Proporciona as funcionalidades mais utilizadas

em termos da especificao Super I/O.

Interface LPC (Low Pin Count).

Iniciativas para controlo do ambiente

Monitorizao do hardware

Controlador da velocidade da ventoinha

Funo "Smart Guardian" da ITE

Memria

principal

Ranhuras DIMM DDR2 x2

Cada mdulo DIMM suporta uma memria

DDR2 de 256/512 MB & 1 GB

Capacidade mxima de memria: 2 GB

Suporta mdulos DDR2 400 / 533 / 667

Mdulo de memria DDR2 de canal duplo

Os mdulos DIMM registados e os DIMM ECC

no so suportados

IDE Controlador IDE integradoModo Bus master Ultra DMA 33 / 66 / 100

Suporta o modo PIO 0~4.

SATA Controlador Serial ATA integrado

Velocidades de transmisso de dados at 3 Gb/s.

Compatibilidade com a especificao SATA

verso 2.0.

LAN Atheros L2Auto negociao de 10 / 100 Mb/s

Capacidade semi/full-duplex

Codec de

somALC662

Sada de udio de 5.1 canais

Suporta a especificao High-Definition Audio

Ranhura PCI Express x16 x1

Ranhura PCI Express x1 x1Ranhuras

Ranhura PCI x2


41/49

945GC-M7 TE

39

ESPECIFICAES

Conector da unidade de disquetes x1 Cada conector suporta 2 unidades de disquetes

Conector IDE x1 Cada conector suporta 2 dispositivos IDE

Conector da para impressora x1 Cada conector suporta 1 Porta para impressora

Conector SATA x4 Cada conector suporta 1 dispositivo SATA

Conector do painel frontal x1 Para suporte de vrias funes no painel frontal

Conector de udio frontal x1 Suporta a funo de udio no painel frontal

Conector para entrada de CDs x1 Suporta a entrada de udio a partir de CDs

Conector de sada S/PDIF x1 Suporta a sada de udio digital

Conector da ventoinha da CPU x1Alimentao da ventoinha da CPU (com a funo

Smart Fan)

Conector da ventoinha do sistema x1 Alimentao da ventoinha do sistema

Conector para limpeza do CMOS x1

Conector USB x2Cada conector suporta 2 portas USB no painel

frontal

Conector de alimentao (24 pinos) x1

Conectores

na placa

Conector de alimentao (4 pinos) x1

Entradas/S

adas no

painel

traseiro

Teclado PS/2 x1

Rato PS/2 x1

Porta srie x1

Porta VGA x1

Porta LAN x1

Porta USB x4

Tomada de audio x3

Tamanho

da placa190 mm (L) X 239 mm (A)

Sistemas

operativos

suportados


A Biostar reserva-se o direito de adicionar ou

remover suporte para qualquer sistema

operativo com ou sem aviso prvio.


42/49

Motherboard Manual

40

POLISHSPEC

Procesor

LGA 775

Procesor Intel Core2Duo / Pentium 4 / Pentium D

/ Celeron D / Celeron 4xx do 3,8 GHz


power consumption.

Obsuga Hyper-Threading

Execute Disable Bit



FSB 533 / 800 / 1066 / 1333 MHz

Chipset Intel 945GCIntel ICH7

Grafika Intel GMA 950Maks. wielkowspdzielonej pamici video

wynosi 224MB

Pami

gwna

Gniazda DDR2 DIMM x 2

Kade gniazdo DIMM obsuguje moduy

256/512MB oraz 1GB DDR2

Maks. wielkopamici 2GB

Obsuga DDR2 400 / 533 / 667

Modupamici DDR2 z trybem podwjnego

kanau

Brak obsugi Registered DIMM oraz ECC DIMM

Super I/O

ITE 8712F

Zapewnia najbardziej powszechne funkcje Super

I/O.

Interfejs Low Pin Count

Funkcje kontroli warunkw pracy,

Monitor H/W

Kontroler prdkoci wentylatora

Funkcja ITE "Smart Guardian"

IDE Zintegrowany kontroler IDEUltra DMA 33 / 66 / 100 Tryb Bus Master

obsuga PIO tryb 0~4

SATA Zintegrowany kontroler Serial ATATransfer danych do 3 Gb/s.

Zgodnoze specyfikacjSATA w wersji 2.0.

LAN Atheros L2

10 / 100 Mb/s z automatycznnegocjacj

szybkoci

Dziaanie w trybie poowicznego / penego

dupleksu

Kodek

dwikowyALC662

5.1 kanaowe wyjcie audio

Obsuga High-Definition Audio

Gniazdo PCI Express x16 x1

Gniazdo PCI Express x1 x1Gniazda

Gniazdo PCI x2


43/49

945GC-M7 TE

41

SPEC

Zcze napdu dyskietek x1 Kade zcze obsuguje 2 napdy dyskietek

Zcze IDE x1 Kade zcze obsuguje 2 urzdzenia IDE

Zcze Port drukarki x1 Kade zcze obsuguje 1 Port drukarki

Zcze SATA x4 Kade zcze obsuguje 1 urzdzenie SATA

Zcze panela przedniego x1 Obsuga elementw panela przedniego

Przednie zcze audio x1 Obsuga funkcji audio na panelu przednim

Zcze wejcia CD x1 Obsuga funkcji wejcia audio CD

Zcze wyjcia S/PDIF x1 Obsuga funkcji cyfrowego wyjcia audio

Zcze gwkowe wentylatora procesora x1Zasilanie wentylatora procesora (z funkcjSmart

Fan)

Zcze gwkowe wentylatora

systemowego x1Zasilanie wentylatora systemowego

Zcze gwkowe kasowania CMOS x1

Zcze USB x2Kade zcze obsuguje 2 porty USB na panelu

przednim

Zcze zasilania (24 pinowe) x1

Zczawbudowane

Zcze zasilania (4 pinowe) x1

Back Panel

I/O

Klawiatura PS/2 x1

Mysz PS/2 x1

Port szeregowy x1

Port VGA x1

Port LAN x1

Port USB x4

Gniazdo audio x3

Wymiary

pyty190 mm (S) X 239 mm (W)

Obsluga

systemu

operacyjne

go


Biostar zastrzega sobie prawo dodawania lub

odwoywania obsugi dowolnego systemu

operacyjnego bez powiadomienia.


44/49

Motherboard Manual

42

RUSSIAN

CPU

(

)

LGA 775

Intel Core2Duo / Pentium 4 /

Pentium D / Celeron D / Celeron 4xx 3.8


power consumption.

Hyper-Threading

Execute Disable Bit



FSB 533 / 800 / 1066 / 1333

Intel 945GC

Intel ICH7

Intel GMA 950

224

DDR2 DIMM x 2

DIMM

256/512& 1DDR2

2

DDR2 400 / 533 / 667

DDR2

DIMM and ECC DIMM

Super I/O

ITE 8712F

Super I/O.

,

ITE "Smart Guardian"

()

IDE

""Ultra DMA 33 / 66 / 100

PIO 0~4,

SATA

ATA

3 /.

SATA 2.0.

Atheros L2

10 / 100 /

/

ALC662

5.1

High-Definition

PCI Express x16 x1

PCI Express x1 x1

PCI x2

x12

IDE x12


45/49

945GC-M7 TE

43

x11

SATA x41

SATA

x1

x1

CD x1 CD

S/PDIF x1

x1

(

)

x1

CMOS x1

USB- x22 USB-

(24 ) x1

(4 ) x1

-

PS/2 x1

PS/2 x1

x1

VGA x1

LAN x1

USB- x4

x3

190 () X 239 ()

OS


Biostar

OS

.


46/49

Motherboard Manual

44

ARABIC

LGA 775


Celeron D / Celeron 4xx 3.8


power consumption.

Hyper-Threading

Execute Disable Bit



533 / 800 / 1066 / 1333

Intel 945GC

Intel ICH7

224Intel GMA 950

2DDR2 DIMM

256/512DDR2DIMM

1

2

DDR2 667 / 533 / 400

DDR2 /

ECCDIMM

Super I/O

ITE 8712F

Super I/O .

Low Pin Count Interface

:

ITE""Smart Guardian

IDEIDE

Ultra DMA 33 / 66 / 100

PIO Mode 0~4

SATASerial ATA ./3

SATA 2.0.

10/100

Atheros L2/10/100

/

ALC6625.1

1x16PCI Express

1x1PCI Express

2PCI


47/49

945GC-M7 TE

45

1

1IDE IDE

1

4SATA SATA

1

1

1CD-IN

S/PDIF

1

(1 Smart Fan(

1

1CMOS

USB2USB

1))24

1))4

/

1PS/2

1PS/2

1

1VGA

1

4USB

3

)((X239(190

Windows 2000 / XP / VISTA Biostar

.


48/49

Motherboard Manual

46

JAPANESE

CPU

LGA 775


Celeron D / Celeron 4xx processor up to 3.8 GHz


power consumption.

Hyper-Threading

Execute Disable Bit



FSB 533 / 800 / 1066 / 1333 MHz

Intel 945GC

Intel ICH7

Intel GMA 950 224MB

DDR2 DIMMx 2

DIMM256/512MB & 1GB DDR2

2GB

DDR2 400 / 533 / 667

DDR2

DIMMECC DIMM

Super I/O

ITE 8712F

Super I/O

H/W

/

ITE

IDE IDEUltra DMA 33 / 66 / 100

PIO Mode 0~4

SATA ATA3 Gb/

SATA2.0

10/100 LAN Atheros L210 / 100 Mb/

/

CodecALC662 5.1

PCI Express x16 x1

PCI Express x1 x1

PCI x2


49/49

945GC-M7 TE

47

x12

IDE x1 2IDE

x1 1

SATA x4 1SATA

x1

x1

CD x1 CDS/PDIF x1

CPU x1 CPU()

x1

CMOS x1

USB x22USB

(24) x1

(4) x1

I/O

PS/2

x1

PS/2 x1

x1

VGA x1

LAN x1

USB x4

x3

190 mm () X 239 mm ()

OS Windows 2000 / XP / VISTABiostarOS

2007/08/31

Biostar 945GC M7 TE Manual

Documents

Transcript of Biostar 945GC M7 TE Manual