BIOSHAFT-MBBR Modular Wastewater Treatment Technology€¦ · BioShaft’s Containerized, Concrete,...
Transcript of BIOSHAFT-MBBR Modular Wastewater Treatment Technology€¦ · BioShaft’s Containerized, Concrete,...
![Page 1: BIOSHAFT-MBBR Modular Wastewater Treatment Technology€¦ · BioShaft’s Containerized, Concrete, Bolted Steel and Fiberglass wastewater treatment systems and upgrades have been](https://reader034.fdocuments.us/reader034/viewer/2022042123/5e9dcf4e74fdb84ed253616f/html5/thumbnails/1.jpg)
BIOSHAFT-MBBR
Modular
Wastewater Treatment Technology
![Page 2: BIOSHAFT-MBBR Modular Wastewater Treatment Technology€¦ · BioShaft’s Containerized, Concrete, Bolted Steel and Fiberglass wastewater treatment systems and upgrades have been](https://reader034.fdocuments.us/reader034/viewer/2022042123/5e9dcf4e74fdb84ed253616f/html5/thumbnails/2.jpg)
Conventional wastewater treatment plants require extended aeration times to meet
effluent discharge regulations. They also produce significant volumes of low solids
sludge that must be dewatered and disposed of at an additional high cost. These
inherent design limitations increase the capital and operating costs of conventional
systems making them very difficult and expensive to construct, operate or upgrade.
The BIOSHAFT-MBBR and MAAD technologies provide unique solutions to these
shortcomings while achieving superior and consistent effluent water quality that meet
treated water discharge regulations.
BioShaft’s Containerized, Concrete, Bolted Steel and Fiberglass wastewater treatment
systems and upgrades have been installed for various municipal and industrial
applications in urban and remote locations around the world.
BioShaft Water Technology Inc. is based in Southern California, USA. The
company owns the BioShaft wastewater treatment System patent
worldwide. We design and manufacture biological wastewater treatment
plants for municipal and industrial applications using the patented and
proprietary BioShaft Moving Bed Bioreactor (BIOSHAFT-MBBR) and
Modular Anoxic Aerobic Digester (MAAD) technologies.
![Page 3: BIOSHAFT-MBBR Modular Wastewater Treatment Technology€¦ · BioShaft’s Containerized, Concrete, Bolted Steel and Fiberglass wastewater treatment systems and upgrades have been](https://reader034.fdocuments.us/reader034/viewer/2022042123/5e9dcf4e74fdb84ed253616f/html5/thumbnails/3.jpg)
The BioShaft Moving Bed Bio Reactor (BIOSHAFT-MBBR) technology maintains a high
concentration of biofilm within the structure of biomass carriers that are kept in motion in very
low attrition surroundings inside a super aerated chamber. The resulting biomass content
within the BIOSHAFT-MBBR system ranges from 15-30 kg/m3 compared to 2.5-4 kg/m3
maintained by conventional extended aeration systems. The stable biofilm accelerates the
breakdown of organics, therefore allowing the BIOSHAFT-MBBR system to have up to double
the capacity of an extended aeration plant with the same footprint.
The system also generates quick-settling colonies of sludge solids. The volume of the sludge
removed from the clarifier in a BIOSHAFT-MBBR system is 80% less than the volume of the
sludge removed from the clarifier in an extended aeration system. These very low sludge
volumes reduce the need for onsite sludge dewatering, transportation and disposal costs.
Combined with a lower power consumption, the operating cost of a BIOSHAFT-MBBR system
is less than 50% of the operating cost of conventional wastewater treatment plants.
The system also provides superior nitrogen removal and far better odor control of both of the
treated water and the low amounts of generated sludge. A BIOSHAFT-MBBR system does not
require any special treatment chemicals, no scheduled chemical cleanings or expensive
components to replace every few years.
The system is suited for small and large municipalities, remote communities, resorts and
labor camps. It’s is also ideal for private sites like residential compounds, golf courses,
parks and rest stops.
The BIOSHAFT-MBBR Wastewater Treatment Technology
![Page 4: BIOSHAFT-MBBR Modular Wastewater Treatment Technology€¦ · BioShaft’s Containerized, Concrete, Bolted Steel and Fiberglass wastewater treatment systems and upgrades have been](https://reader034.fdocuments.us/reader034/viewer/2022042123/5e9dcf4e74fdb84ed253616f/html5/thumbnails/4.jpg)
Containerized System Standard Modules
Container Outside Dimensions
Model
Capacity (m3/day)
Capacity (GPD) Eq. Pop.
20’L x 8’W x 9’6”H CS-050 50 13,000 250
40’L x 8’W x 9’6”H CS-100 100 27,000 500
40’L x 8’W x 9’6”H CS-150 150 40,000 750
40’L x 8’W x 9’6”H CS-180 180 47,000 900
40’L x 8’W x 11’6”H CS-250 250 66,000 1,250
Influent BOD & TSS: 250 & 250 mg/L, System Capacities will decrease if Wastewater temperature < 60° F
Effluent BOD & TSS: < 10 & < 5 mg/L, System Capacities will decrease if Nutrient removal is requested.
Standard Containerized BIOSHAFT-MBBR Systems can be upgraded to treat wastewaters with BOD up to 400 mg/L without any loss in system capacity.
The Containerized System Standard Modules are standard 20 ft or 40 ft sea-freight
shipping container designed and manufactured from scratch, not a new or used ISO
shipping container conversion. They are configured as a complete packaged BIOSHAFT-
MBBR wastewater treatment station. The Modules are single or multiple ‘Plumb, Plug, &
Play Plants’ that are delivered within weeks to eliminate the high cost and long
construction times associated with traditional civil works. The multiple Modules concept
will be ideal to build new or upgrade existing plants reaching capacities exceeding half a
million gallons per day. The containers occupy about half the footprint occupied by
conventional treatment systems and produce around 80% less sludge volume that makes
them more affordable to manage.
Each engineered container comes with equalization pumps, a primary parabolic screen, an anoxic chamber, a dynamic aeration chamber, a bioreactor chamber with biomass carrier media, one clarification chamber with tube settlers, one upward flow tertiary filtration chamber, assembled internal plumbing and air diffusers, weirs, isolation and control valves. Two skid mounted air blowers and chlorination system. Also includes a skid mounted control panel, IP54, VFD and direct motor control, indication lights, switches, wiring
terminated to control panel.
Containerized System Standard Modules Wastewater Treatment New Plants
BIOSHAFT-MBBR
![Page 5: BIOSHAFT-MBBR Modular Wastewater Treatment Technology€¦ · BioShaft’s Containerized, Concrete, Bolted Steel and Fiberglass wastewater treatment systems and upgrades have been](https://reader034.fdocuments.us/reader034/viewer/2022042123/5e9dcf4e74fdb84ed253616f/html5/thumbnails/5.jpg)
Containerized Reactor Standard Modules
Container Outside Dimensions
Model
Capacity after upgrade (m3/day)
Capacity after upgrade (GPD)
Eq. Pop.
20’L x 8’ W x 11’ H CR-250 250 66,000 1,250
40’L x 8’ W x 11’ H CR-500 500 132,000 2,500
Influent BOD & TSS: 250 & 250 mg/L, System Capacities will decrease if Wastewater temperature < 60°F Effluent BOD & TSS: < 20 & < 20 mg/L, System Capacities will decrease if Nutrient removal is requested.
Minimum Required Aeration Tank HRT after Bioreactor Upgrade- 6 hours.
Containerized Bioreactor Standard Modules
Wastewater Treatment Plants Upgrade
The Containerized Bioreactor Standard Module follows the same concept of the
Containerized System Module but using the whole container as Bioreactor. These Modules
can be easily plumbed to an existing or new Pre Aeration or Pre Anaerobic/Anoxic
/Clarification basins for capacities ranging from 66,000 GPD up to 8 Million GPD reducing the
footprint of the plant by 50% and offers the same benefits of the Containerized System
Standard Modules. These modules are a good alternative when the elevations or the
dimensions or the Pre Aeration or Anaerobic/ Anoxic basins make it difficult to use the
Submerged Bioreactors Standard Modules.
Please contact BioShaft to request a full proposal with complete design using the Bioreactors
Modules.
BIOSHAFT-MBBR
Each engineered bioreactor container comes with attached growth chambers with reactor hood, top and bottom screen covers, membrane diffusers and biomass carriers; air saturation chambers with membrane diffusers; assembled internal plumbing; isolation and control valves; two skid mounted air blowers; skid mounted control panel, IP54, VFD and direct motor control, indication lights, switches, wiring terminated to control
panel.
![Page 6: BIOSHAFT-MBBR Modular Wastewater Treatment Technology€¦ · BioShaft’s Containerized, Concrete, Bolted Steel and Fiberglass wastewater treatment systems and upgrades have been](https://reader034.fdocuments.us/reader034/viewer/2022042123/5e9dcf4e74fdb84ed253616f/html5/thumbnails/6.jpg)
Submerged Reactor Standard Modules
Ships inside open top Container
Model
Capacity after upgrade (m3/day)
Capacity after upgrade (GPD)
Eq. Pop.
20’L x 8’ W x 11’ H CR-250 250 66,000 1,250
40’L x 8’ W x 11’ H CR-500 500 132,000 2,500
Influent BOD & TSS: 250 & 250 mg/L, System Capacities will decrease if Wastewater temperature < 60°F Effluent BOD & TSS: < 20 & < 20 mg/L, System Capacities will decrease if Nutrient removal is requested.
Minimum Required Aeration Tank HRT after Bioreactor Upgrade- 6 hours.
Submerged Bioreactor Standard Modules
Wastewater Treatment Plants Upgrade
The Submerged Bioreactor Standard Module is self-standing, designed and manufactured
to ship inside a standard open top shipping container.
The Module is designed to be anchored to the walls of a new or existing plant’s concrete
chambers. Custom designs using multiple Modules can be used for new or existing
Wastewater Treatment Plants reducing the footprint of the plant by 50%, or if desired,
double the existing plants capacity using the original planned footprint.
Depending on the condition of the existing plant, the upgraded plant can obtain a
significant percentage of the benefits mentioned on page 3 of this pamphlet.
Please contact BioShaft to request a full proposal with complete design using the
Bioreactors Modules
BIOSHAFT-MBBR
Prefabricated Submerged Bioreactors Field-erected Submerged Bioreactors
![Page 7: BIOSHAFT-MBBR Modular Wastewater Treatment Technology€¦ · BioShaft’s Containerized, Concrete, Bolted Steel and Fiberglass wastewater treatment systems and upgrades have been](https://reader034.fdocuments.us/reader034/viewer/2022042123/5e9dcf4e74fdb84ed253616f/html5/thumbnails/7.jpg)
The MAAD System integrates a compartmentalized tank with the BIOSHAFT-MBBR System.
The first and last chambers of the tank are anoxic while the middle chambers are
anaerobic. The tank maintains a thick blanket of anaerobic sludge that breaks down high
strength organics and nutrients to more simple compounds for complete downstream
removal by the BIOSHAFT-MBBR System. The compartmentalized tank also digests sludge
generated by the rest of the system.
A municipal MAAD system installation occupies less than 40% of the footprint and
consumes less than 50% of the power consumed by conventional municipal wastewater
treatment systems. The system’s built-in sludge digestion mechanism reduces sludge
volume generation by more than 95% compared to conventional systems. This eliminates
the need for on-site sludge dewatering and regular offsite transportation and disposal, as
the excess sludge need only to be removed once every few years. The operating cost of a
typical municipal MAAD system is less than 50% of the operating cost of a conventional
wastewater treatment system.
In industrial applications, the MAAD system digests fat, oils and grease making it possible
to install a single integrated wastewater system without the need to install an upfront DAF
system which is expensive to install, expensive to operate, requires highly skilled labor
and still generates sludge that is expensive to dewater and dispose of.
The MAAD Wastewater Treatment Technology
Proprietary and Patent Notice The content and the concept of the system are the intellectual property of BioShaft Water Technology Inc. are subject to legal copyright, and shall not be copied or altered by the Recipient without the expressed written consent of BioShaft. National and International patents protect core parts of our systems. BioShaft reserves the right to alter the proposed system in order to incorporate technical advances realized after the date of this proposal. By receiving and accepting this proposal, recipient agrees to the stated terms and conditions.
![Page 8: BIOSHAFT-MBBR Modular Wastewater Treatment Technology€¦ · BioShaft’s Containerized, Concrete, Bolted Steel and Fiberglass wastewater treatment systems and upgrades have been](https://reader034.fdocuments.us/reader034/viewer/2022042123/5e9dcf4e74fdb84ed253616f/html5/thumbnails/8.jpg)
Modular overall design for phased installation or expansion
Modular reactors can be added to existing systems to upgrade capacity, quality and to significantly reduce sludge production
The MAAD system provides additional footprint, sludge and power consumption reduction benefits for municipal applications
The MAAD system can treat mixed wastewaters from the food, beverage and dairy processing industries
Underground installation, useful where land is at a premium cost, where no visual disturbance is required or where extreme temperatures exists
BioShaft Water Technology:
222 W. 6th Street #400 San Pedro, CA 90731
T: +1 (310) 707-2553 F: +1 (310) 872-5370
[email protected] www.BioShaft.com
Municipal:
New/ Upgrades for City, Town, Residential/ Commercial Buildings
Industrial
Slaughterhouse, Food Processing, Dairy
Satellite Plants
Private Developments, Resorts, Golf Courses, Rest Stops, Parks
The BIOSHAFT-MBBR process is superior to other biological wastewater treatment systems in many ways:
BioShaft Middle East:
T: +(966 12) 288 3658
F: +(966 12) 665 9786 Cell: +(966) 541 535776
Local Distributor
Standard and Custom Systems Applications
More than double the capacity of a conventional wastewater treatment plant for the same footprint
Lower capital, operating and maintenance costs
80% less sludge volume compared to conventional activated sludge systems.
Minimal electromechanical components
No coagulating or flocculating Chemicals
No BIOSHAFT-MBBR bio reactor replacement
costs
Far better odor control
High and reliable nutrient removal
Superior BOD and TSS reduction
High tolerance to process upsets.