Biomass Pellet Mill,Pellet Machine,Pellet Plant Supplier
2
ZHANGQIU YULONG MACHINE CO., LTD EMAIL: [email protected] M.P:86-15662714581 Website: www.yulongjixie.org www.woodpelletmill.net Complete Biomass Fuel Briquette Pellet Manufacturing Machine Brief Introduction Vertical Ring Die Pellet Machine is a new biomass fuel production machinery by using crushed sawdust and bran from eucalyptus ,pine ,birch ,poplar ,fruit and agricultural straw ,bamboo .Compared with the old machine ,it absorbed the essence of horizontal ring die and flat die pellet machine ,solved the insufficient pressure ,die crack problems of horizontal ring die pellet machine ,and overcame the small capacity ,high failure rate of flat die pellet machine . Technical Parameters
-
Upload
yuongjixie -
Category
Business
-
view
50 -
download
3
Transcript of Biomass Pellet Mill,Pellet Machine,Pellet Plant Supplier
ZHANGQIUYULONGMACHINECO., LTDEMAIL: [email protected] M.P:86-15662714581
Website:www.yulongjixie.orgwww.woodpelletmill.net
Complete Biomass Fuel Briquette Pellet Manufacturing Machine
Brief IntroductionVertical Ring Die Pellet Machine is a new biomass fuel production machinery by usingcrushed sawdust and bran from eucalyptus ,pine ,birch ,poplar ,fruit and agriculturalstraw ,bamboo .Compared with the old machine ,it absorbed the essence of horizontal ringdie and flat die pellet machine ,solved the insufficient pressure ,die crack problems ofhorizontal ring die pellet machine ,and overcame the small capacity ,high failure rate of flatdie pellet machine .
Technical Parameters
ZHANGQIUYULONGMACHINECO., LTDEMAIL: [email protected] M.P:86-15662714581
Website:www.yulongjixie.orgwww.woodpelletmill.net
Model Power (kw) Capacity (kg/h) Weight (ton)
XGJ560 90 1-1.5 6.7
XGJ720 160 1.5-2.5 8
XGJ850 220 2-3 14.5
XGJ920 315 3-5 18
XGJ1050 450 5-6 29
XGJ1250 660 7-8 48
Feature
1. Material come from belt conveyor and then into the storage,screw conveyor feedmaterial automatically to the pellet forming chamber
2. In the forming chamber ,two gear and mold help to form and press pellet,Gear rotate topress pellet come out surround.
3. Automatic cutting machine around the mold ,which can cut pellet automatically,it canalso adjust the length of pellet .
4. During the process ,the oil supply device can lubricate the gear and mold.
FAQ1. Q: Are you a trading company or a manufacturer?
A: We are a manufacturer, which has almost 18years of experience specializing in thisindustry.
2. Q: How long is your guarantee?
A: One Year (Calculated from the equipment arrives the customer’s side.). After this periodwe will definitely still support you when needed. You will be welcome to contact us with anyproblem might experience.
3. Q: Will you send engineers to install the plant?
A: yes, but at an extra cost payable by the customer. Or you can get local contractors to dothe commissioning and we send one supervising engineer.
