Bio-Data

NAME : SUDHEER KUMAR BATTULA

DESIGNATION : Sr.Assistant Professor

AREAS OF RESEARCH : Mechancal Vibrations

EMAIL : sudheerbattula1984@gmail.com

PHONE : 7893924491

DATE OF JOINING : 07/09/2011

DATE OF BIRTH : 25/12/1984

Educational Qualifications: B.Tech.M.E (Ph.D)

Degree Branch/Specialization College University Year of Admission

Year of Pass

% of marks

UG Mechanical PVP SIT JNTUH 2002 2006 60.41

PG Mechanical/Machine

Design AU AU 2006 2008 74.86

PhD Mechanical/Vibrations AU AU 2014 Pursuing

Experience Summary: Teaching: 11 Years Industry: Nil Research: Nil Total: 11 Yrs

S.No. College University

Post held Duration Ratified

(Y/N) Date of

Ratification Exp. in yrs

From To

1 LBRCE JNTUK Sr.Assistant Professor 1/5/17

Till Date N 2.0

2 LBRCE JNTUK Assistant Professor 7-9-11

30-06-11

Y 2013 6.0

3 DVR&Dr.HS

MIC College

of

Engineering

JNTUK

Assistant Professor

8/11/08 6/9/11 Y 2010 3.0

COURSES HANDLED: Finite Element Method, Tribology, Machine Design-I&II, Kinematics of Machines, Dynamics of

Machines, Theory of Machine, Strength of Materials, Machine Drawing, Engineering Mechanics

,Engineering Graphics. Professional Activities:

PUBLICATIONS:

Journals:

B.Sudheer Kumar. Rama Murthy Raju, Ch.Ratnam” Engine Isolation Angular Mount With Different Types Elastomers” Materials Today Proceedings Elsevier Oct-2018. ISBN: 19555-19564 Scopus Indexed.

B.Sudheer Kumar. Rama Murthy Raju, Ch.Ratnam” Shock and Vibration Prevention Using Angular Mounts with Different Types of Oil-Based Elastomers”. Advanced in Manufacturing Process, Lecture Notes in Mechanical Engineering, Springer, Singapore. Oct – 09. 2018 ISBN 978-981-13-1724-8 Scopus Indexed.

B.Sudheer Kumar, T.Venkateswara Rao, KND.Malleswara Rao, V.Shankar Rao

“Flexural Properties of Bamboo Fiber Reinforced Hybrid Composite” International

Journal of Innovative Research in Technology Volume 4 issue 8 ISSN: 2349-6002 Jan-

2018.

B.Sudheer Kumar, “Effect of Mechanical Properties on Polyester Typha Fiber in

Composition of Wood Power and Coconut Shell Ash“International Journal of

Engineering Technology Science and Research Vol 2 issue 4, April’15.

B.Sudheer Kumar, Design and simulation of MEMS based piezoelectric shear actuated

beam “American Journal of materials sciences” Volume.2 issue No.5 oct-2012.

B.Sudheer Kumar Design and analysis of MEMS based composite piezoelectric ultrasonic

transducer “Electrical and electronics engineering” Volume.2 (6) issue No.3 dec-2012.

B.Sudheer Kumar Tensile properties of long jute fiber reinforced polypropylene

composites” International journal of engineering inventions ISSN NO: 2278-7461

2012Sep.

B.Sudheer Kumar Investigation on sol-gel synthesis, morphology and characterization of

zinc oxide nano particles “International journal of engineering research &technology”

ISSN NO: 2278-0181 2012 Aug.

B.Sudheer Kumar Characterization of AL-SI casting alloys reinforced with Nano Sic

composites” International journal of engineering research & technology” ISSN NO:

2278-0181 2012 Aug.

B.Sudheer Kumar Preventing shock and vibrations using angular mount with polyurethane

elastomer“International journal of statistika and mathematika” ISSN: 2249-8605 2012

July.”

A) Conferences:, Books / Chapters Published:

B.Sudheer Kumar. Rama Murthy Raju, Ch.Ratnam” Engine Isolation Angular Mount With Different Types Elastomers” Materials Today Proceedings Elsevier ICMPC Oct-2018. ISBN: 19555-19564.

B.Sudheer Kumar. Rama Murthy Raju, Ch.Ratnam” Shock and Vibration Prevention Using Angular Mounts with Different Types of Oil-Based Elastomers”. In: K.S. Vijay Sekar et al. (Eds) Advanced in Manufacturing Process, Lecture Notes in Mechanical Engineering, Springer, Singapore. Oct – 09., 2018

Doi.org/10.1007/978-981-13-1724-8_57., ISBN978-981-13-1724-8

B.Sudheer Kumar, Malleswarao KND, Kumar R.P, VenkateswaraRao “Investigation of Mechanical /Tribological properties of composite Ersatz Articular Cartilage with Nano fillers”.In: Lakshminarayana A., Idapalapati S., Vasudevan M. (Eds) Advances in Material and Materials and Metallurgy. Lecture notes in Mechanical Engineering springer, Singapore. Sep- 02., 2018 Doi.org/10.1007/978-981-13-1780-4_37 .,ISBN 978-981-13-1779-8

SPONSORED RESEARCH:

CERTIFICATION COURSES:

Got certified with Elite from NPTEL online certification course (8 Weeks) on “introduction to vibrations conducted by IIT Madras in the year 2018.

Got certified from NPTEL online certification course (4 Weeks) on “outcome based

pedagogic principles of effective teaching conducted by IIT Madras in the year 2018 Got certified with from NPTEL online certification course (8 Weeks) on “introduction to

vibrations conducted by IIT Madras in the year 2017.

WORKSHOPS/FDPS ATTENDED:

Attended Three Day FDP on” outcome based pedagogic principles of effective teaching”

sponsored by Ministry of HRD., Govt of India 2018.

Attended one week FDP on “Noise and Vibration Control of Structures: Engineering

Applications “during 26/11/8 to 1/12/18 ,2018sponsored by AICTE Delhi at JNTU Kakinada.

Attended one week FDP on “Organization Behavior “ on ICT MODE Organized by NITTTR

Ministry of HRD., Govt of India “du ring 12/11/18 to16/11/18,2018 at LBRCE Mylavaram

Attended 3 Day FDP on Fundamentals of Structural Analysis during 7/11/16-9/11/16, 2013

at LBRCE Mylavaram.

Attended 3 Day FDP on” Fundamentals of Engineering Mechanics” during 9/11/15-

11/11/15, 2015 at LBRCE Mylavaram.

Attended One week FDP on Recent Trends in manufacturing process during 17/3/14-

23/3/14, 2014 at LBRCE Mylavaram.

Attended One week FDP on Recent Advances in Mechanical Engineering “during 26/12/14-

30/12/14, 2014 at LBRCE Mylavaram.

Attended 3 day FDP on “Engineering drawing using Auto CAD “during 13/11/14-15/11/14,

2014 at LBRCE Mylavaram.

Attended One week FDP on “finite element analysis and practices on through ANSYS

during 04/02/13 -10/02/13, 2013 at LBRCE Mylavaram.

WORKSHOPS / FDPS / STTPS / TRAINING PROGRAMS ORGANIZED:

One Day Work Shop on” Empowering Teaching Excellence through E-Learning

Platforms” Organized during 8/7/2017 at JNTU KAKINADA

One Day Work Shop on “Advances in Materials and Manufacturing

Technologies Organized during 23/4/16, at SRKR Engineering college 2016.

Three day workshop on” Finite element analysis and CFD using ANSYS”

during 8/12/16-10/12/16. at LBRCE Mylavaram.

PROJECTS SUPERVISED: B.Tech - 15., M.Tech. - 01 MEMBERSHIPS:

Life Member of International Association of Engineers (IAENG) – M.NO:214270 Life Member of The Institution of Engineers(INDIA) (IE) – AM 162703-4

PROGRAM COMMITTEE:

AWARDS/ ACHIEVEMENTS:

ADVISORY AND ADMINISTRATIVE ROLES: