Binder 1

126

621557$

428/4AGPB

Set of grip crimp pliers with

exchangeble jaws in plastic box

• quick changing system for 4 different types of jaws

• ratchet crimp system provides reliable work

• for insulated terminals AWG10-12/14-16/18-22 (4-

6/1.5-2.5/0.5-1.0mm²)

• for non-insulated terminals AWG14-6 (0.2-16mm²)

• for cord end terminals AWG22-6 (0.5-16mm²)

• for BNC/TNC coax conectors RG-58, RG-59/62. Hex

connectors 0.255 (6.48mm²), 0.213 (5.41mm²), 0-068

(1.73mmV)

602328

428.1/4

Spare parts for art. 428/4

• spare head

L A

613101 175 10 30

605206 250 12 35

613102 300 14 40

429/3

Universal lock - grip pliers

• jaws drop forged from special tool steel, entirely

hardened and tempered

• handles made from sheet metal

• surface finish: nickel plated

• screw phosphated

• symmetric jaws

L A

601551 175 10 30

601552 250 12 35

601553 300 14 40

430/3

Grip pliers






L A D

601554 325 53 25

431/2

Brake spring pliers

• material: special tool steel

• drop forged, entirely hardened and tempered

• loose oil hardened head, phosphated surface finish:

chrome plated

L A B C D

601142 280 30 76 75 45

432/3A

Welders` lock - grip pliers






• for angle tubes

242

608540 971/1BI 50

1000S, 970U2

971/1BI

Tool set 51 pcs in tool case 970U2

608541 971/2VDE 53

1000T, 970U2

971/2VDE

Tool set VDE 52 pcs in tool case 970U2

612548 971/3VDE 344

1000AD, 970U3

971/3VDE


604575 971/4 22

1000AC, 970U2

971/4


A B H

605160 185 50 333

977/1

Metal stand for open end wrenches

• material: sheet metal

• ecological lacquered with cadmium and lead free colour

A B H

605161 135 60 420

977/2

Metal stand for combination wrenches -

long type



A B H

605162 115 60 420

977/3

Metal stand for combination wrenches -

short type



A B H

605163 220 80 415

977/4

Metal stand for offset ring wrenches



A B H

607386 170 70 575

977/5

Metal stand for combination wrenches



203

A B H

601939 420 140 320

909

Electrical bag

A B H

602552 350 110 300

909/1

Electrical bag

601998 910 39

1000M, 909

910

Tool set 39 pcs in artifitial leather bag

602547 910/1 24

1000N, 909/1

910/1

Tool set 24 pcs in artificial leather bag

202

613338 904/2 21

190/1 6p (24), 418/2 (180), 6500E6,3 (1.0 x 5.5),

6503E6,3 (PH 1, PH 2, PH 3), 6509E6,3 (3, 4, 5, 6),

238/1 6p (8, 10, 12, 13, 14), 238.7/1 (3/8” - 1/2”),

447/6 (175), 188.8 (1/4”), 250/1 (150),

238.5/2 (3/8”), 188.9 (1/4” - 1/4”)

904/2

Tool set for motorbike

617570 905VDE 13

406/1VDE (180), 461/1VDE (160), 478/1VDE

(160), 472/1VDE (160), 556A (160), 753P (150),

710P (3), 603VDE (0.4 x 2.5 x 75, 0.8 x 4.0 x

100, 1.0 x 5.5 x 125), 613VDE (PH1 x 80, PH2 x

100), 630VDE (140)

905VDE

Tool set VDE in bag

617571 905VDEBI 13

406/1VDEBI (180), 461/1VDEBI (160),

478/1VDEBI (160), 472/1VDEBI (160),

753VDEDP (150), 385VDE (180), 603VDETBI

(0.4 x 2.5 x 75, 0.8 x 4.0 x 100, 1.0 x 5.5 x 125),

613VDETBI (PH1 x 80, PH2 x 100), 710P (3),

630VDE (140)

905VDEBI

Tool set VDE BI in bag.

620105 905BI 13

406/1BI (160), 461/1BI (160), 478/1BI (160),

472/1BI (160), 556A (160), 753P (150), 710P (3),

602TBI (0.4 x 2.5, 0.8 x 4.0, 1.0 x 5.5), 615TBI

(PH 1 x 80, PH 2 x 100), 630VDE (140)

905BI

Tool set BI in bag

620106 905CR 13

406/4G (180), 461/4G (160), 478/4G (160),

472/4G (160), 556A (160), 753P (150), 710P (3),

602CR (0.4 x 2.5, 0.8 x 4.0, 1.0 x 5.5), 615CR

(PH 1 x 80, PH 2 x 100), 630VDE (140)

905CR

Tool set CR in bag

620107 906BI 6

461/1BI (160), 406/1BI (180), 602TBI (0.4 x 2.5,

0.8 x 4.0), 615TBI (PH 2 x 100), 630VDE (140)

906BI

Tool set BI in bag

620108 906CR 6

461/4G (160), 406/4G (180), 602CR (0.4 x 2.5,

0.8 x 4.0), 615CR (PH 2 x 100), 630VDE (140)

906CR

Tool set CR in bag

617572 906VDE 6

461/1VDE (160), 406/1VDE (180), 603VDE (0.4

x 2.5 x 75, 0.8 x 4.0 x 100), 613VDE (PH2 x 100),

630VDE (140)

906VDE

Tool set VDE in bag

617573 906VDEBI 6

461/1VDEBI (160), 406/1VDEBI (180),

603VDETBI (0.4 x 2.5 x 75, 0.8 x 4.0 x 100),

613VDETBI (PH2 x 100), 630VDE (140)

906VDEBI

Tool set VDE BI in bag

55

611939 190BI6P24 10 - 32 / 24

190/1 6p (10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 27, 30, 32),

190.1/1ABI (1/2”), 190.2/1BI (1/2”), 190.3/1 (1/2”), 190.4/1 (125, 250),

190.6/2 (1/2”)

190BI6P24

Socket set 1/2” in metal box

611942 190BI12P14 10 - 24 / 14

190/1 12p (10, 11, 12, 13, 14, 15, 17, 19, 21, 22, 24), 190.1/1ABI (1/2”),

190.3/1 (1/2”), 190.4/1 (125)

190BI12P14


615327 190BI12P23 10 - 32 / 23

190/1 12p (10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 27, 30, 32),

190.1/1ABI (1/2”), 190.3/1 (1/2”), 190.4/1 (250, 125), 190.6/2 (1/2”)

190BI12P23


611941 190BI12P24 10 - 32 / 24

190/1 12p (10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 27, 30, 32),

190.1/1ABI (1/2”), 190.2/1BI (1/2”), 190.3/1 (1/2”), 190.4/1 (125, 250),

190.6/2 (1/2”)

190BI12P24


611943 190BI12P23IN 3/8” - 1.1/4” / 23

190.6/2 (1/2”), 190.4/1 (125, 250), 190.3/1 (1/2”), 190/1 12p (3/8”, 7/16”, 1/2”,

9/16”, 19/32”, 5/8”, 11/16”, 3/4”, 25/32”, 13/16”, 7/8”, 15/16”, 1”, 1.1/16”, 1.1/8”,

1.3/16”, 1.1/4”), 190.1/1ABI (1/2”), 190.2/1BI (1/2”)

190BI12P23IN


615180 190BI6P22IN 5/16” - 1.1/4” / 22

190.6/2 (1/2”), 190.4/1 (125, 250), 190.3/1 (1/2”), 190.1/1ABI (1/2”), 190.2/1BI

(1/2”), 190/1 6p (5/16”, 3/8”, 7/16”, 1/2”, 9/16”, 5/8”, 11/16”, 3/4”, 13/16”, 7/8”,

15/16”, 1”, 1.1/16”, 1.1/8”, 1.3/16”, 1.1/4”)

190BI6P22IN


76

L D1 D2 D3

600745 6 - 17 230 6 8 10

600747 18 - 41 330 12 14 16

215.1/2

Rod for 215/2

• material: special tool steel

• surface finish: chrome plated according to EN12540

• entirely hardened and tempered

600710 215/2CB 6 - 32 / 14

215/2 (6 x 7, 8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 17, 18 x 19, 20 x 22, 21 x 23,

24 x 26, 25 x 28, 27 x 32), 215.1/2 (6 - 17, 18 - 41)

215/2CB

Set of tubular box wrenches in carton box

L D1 D2 T1 T2 D

615229 6 x 7 105 10 11 5 6 4

615230 8 x 9 110 12.5 13.5 6 7 5

615231 10 x 11 120 15 16 7.5 8 7

615232 12 x 13 140 17.5 19 8 9.5 8

615233 14 x 15 145 20 21.5 10 11 8

615234 16 x 17 155 22.5 24 11 12 10

615235 18 x 19 165 25.5 26 13 15 12

615236 20 x 22 175 28 30 15 16 14

615237 21 x 23 185 29 31 16 17 14

617640 22 x 24 185 30 32.5 16 19 14

615238 24 x 26 195 32.5 36.5 19 21 18

615239 24 x 27 195 32.5 36.5 19 21 18

615240 25 x 28 205 34 37 19 21 18

615241 27 x 29 205 36 39 21 22 18

617641 27 x 30 205 36 42 21 22 22

615242 30 x 32 210 40 42.5 22 26 22

617642 32 x 36 230 44 50 26 30 22

216/1

Forged tubular box wrench

• material: chrome vanadium


• polished head


• made according to standard DIN 896 (only metric dimension)

D1 D2 D3 D4 L

615243 6 - 19 3.5 4.5 5.5 7.5 165

615244 20 - 32 9.5 11.8 0 0 210

216.1

Rod for 216/1




615252 216/1CB 6 - 22 / 9

216/1 (6 x 7, 8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 17, 18 x 19, 20 x 22), 216.1 (6 - 19)

615253 216/1CB 6 - 32 / 14

216/1 (6 x 7, 8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 17, 18 x 19, 20 x 22, 21 x 23,

24 x 27, 25 x 28, 30 x 32), 216.1 (6 - 19, 20 - 32)

216/1CB

Set of forged tubular box wrenches in carton box

L L1 D1 D2 D3 T1 T2

617051 4 115 94 7 4 4.3 4.5 4.5

617052 5 115 94 7 5 4.3 5 5

617053 5.5 115 94 7 5.5 4.3 5 5

617054 6 121 100 9 6 6.3 5.5 5.5

617055 7 125 102 9 7 6.3 5.5 5.5

617056 8 135 110 11 8 6.3 6.5 6.5

617057 9 135 110 11 9 6.3 6.5 6.5

617058 10 150 118 13 10 6.3 7.5 7.5

617059 11 150 121 13 11 6.3 7.5 7.5

617060 12 165 124 16 12 8.5 9 9

617061 13 165 128 16 13 8.5 9 9

617062 14 175 135 18 14 8.5 10.5 10.5

617063 15 175 137 18 15 8.5 10.5 10.5

617064 16 185 141 20 16 10.5 11.5 11.5

617065 17 185 141 20 17 10.5 11.5 11.5

617066 18 20 151 22 18 12.5 14 14

217/2

Offset tubular box wrench

• material: chrome molybdenum


• Applications: In industry or repair shops for working in inaccessible areas. The

through hole enables tightening of fasteners with a long projecting thread.


78

610914 220/3PB1 2 - 10 / 8

220/3 (2, 2.5, 3, 4, 5, 6, 8, 10)

612161 220/3PB1 5/64” - 3/8” / 8

220/3 (5/64”, 3/32”, 1/8”, 5/32”, 3/16”, 1/4”, 5/16”, 3/8”)

220/3PB1

Set of hexagon wrenches in plastic box

607852 220/3PH 1.5 - 10 / 9

220/3 (1.5, 2, 2.5, 3, 4, 5, 6, 8, 10)

617079 220/3PH 1.5 - 12 / 10

220/3 (1.5, 2, 2.5, 3, 4, 5, 6, 8, 10, 12)

617081 220/3PH 1/16” - 3/8” / 9

220/3 (1/16”, 5/64”, 3/32”, 1/8”, 5/32”, 3/16”, 1/4”, 5/16”, 3/8”)

220/3PH

Set of hexagon wrenches on plastic clip

610986 220/3MH 2.5 - 10 / 7

220/3 (2.5, 3, 4, 5, 6, 8, 10)

220/3MH

Set of hexagon wrenches in metal folding holder

L1 L2

618817 1.5 46.5 15.5

618818 2 52 18

220/4

Hexagon wrench



• surface finish: phosphated to standard DIN 12476

• made according to standard ISO 2936 (only metric dimension)

L1 L2

618819 2.5 58.5 20.5

618820 3 66 23

618821 4 74 29

618822 5 85 33

618823 6 96 38

618824 7 102 41

618825 8 108 44

618826 10 122 50

618829 12 137 57

618831 14 154 70

618833 17 177 80

618835 19 199 89

618839 3/64” 41 13

618816 1/20” 41 13

618828 1/16” 47 16

618843 5/64” 52 18

618837 3/32” 58 20

618847 7/64” 66 23

618834 1/8” 66 23

618850 9/64” 72 26

618842 5/32” 74 29

618836 3/16” 85 33

618846 7/32” 91 36

618832 1/4” 96 38

618841 5/16” 108 44

618840 3/8” 122 50

618845 7/16” 130 53

618830 1/2” 145 63

618849 9/16” 154 69

618844 5/8” 176 76

618838 3/4” 199 89

618848 7/8” 222 102

618827 1” 275 125

619404 220/4PH 1.5 - 10 / 9

220/4 (1.5, 2, 2.5, 3, 4, 5, 6, 8, 10)

619405 220/4PH 1.5 - 12 / 10

220/4 (1.5, 2, 2.5, 3, 4, 5, 6, 8, 10, 12)

619406 220/4PH 1/16” - 3/8” / 9

220/4 (1/16”, 5/64”, 3/32”, 1/8”, 5/32”, 3/16”, 1/4”, 5/16”, 3/8”)

220/4PH

Set of hexagon wrenches on plastic clip

67

608880 193TXCB TX 6 - TX 45 / 10

193TX (TX 6, TX 8, TX 10, TX 15, TX 20, TX 25, TX 27, TX 30, TX 40, TX 45)

193TXCB

Set of TX profile screwdrivers with T handle in carton box

607888 193TXCS TX 10 - TX 45 / 7

193TX (TX 10, TX 15, TX 20, TX 25, TX 30, TX 40, TX 45)

193TXCS

Set of TX profile screwdrivers with T handle in carton box

607889 193TXMS TX 6 - TX 45 / 10

193TX (TX 6, TX 8, TX 10, TX 15, TX 20, TX 25, TX 27, TX 30, TX 40, TX 45)

193TXMS

Set of TX profile screwdrivers with T handle on

metal stand

D B L

607992 6 10.5 165 400

607993 7 11.5 165 400

607994 8 12.5 165 400

607995 9 13.8 175 450

194/1A1

Flexible socket wrench with T-handle




D B L

607996 10 15 175 450

607997 11 16.5 175 450

607998 12 17.5 175 450

607999 13 19 175 450

608101 14 20.5 180 500

608102 15 21.7 180 500

608103 16 23 180 500

608104 17 24 180 500

608105 18 25.4 180 500

608106 19 26.6 220 500

608107 20 27.7 220 500

608108 21 29 220 500

608109 22 30.5 220 500

608110 24 33 220 500

B L

608113 3/8” 200 450

194/2B1

3/8” drive swivel with T - handle




B L

608114 1/2” 250 500

194/1B2

1/2” drive swivel with T - handle




B L

608117 3 200 400

608118 4 200 400

608119 5 200 400

608120 6 200 400

608121 8 200 400

194/2C1

Flexible hexagonal wrench with T-handle




77

L L1 D1 D2 D3 T1 T2

617067 19 200 151 22 19 12.5 14 14

617068 20 210 158 25 20 12.5 15.5 15.5

617069 21 210 158 25 21 12.5 15.5 15.5

617070 22 220 170 25 22 12.5 15.5 15.5

617071 23 225 170 27 23 14.5 16 16

617072 24 230 175 30 24 14.5 17 17

617073 27 230 182 30 27 14.5 20 20

617074 30 260 195 34 30 16.5 21.5 21.5

617075 32 280 210 34 32 16.5 23 23

617123 217/2CB 6 - 22 / 11

217/2 (6, 7, 8, 10, 11, 12, 13, 14, 17, 19, 22)

617124 217/2CB 6 - 22 / 17

217/2 (6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22)

217/2CB

Set of offset tubular box wrenches in carton box

L1 L2

607823 1.5 46.5 15.5

607824 2 52 18

607825 2.5 58.5 20.5

601036 3 66 23

601037 4 74 29

601038 5 85 33

601040 6 96 38

601041 7 102 41

601042 8 108 44

601044 10 122 50

220/3

Hexagon wrench





L1 L2

601045 12 137 57

601046 14 154 70

601047 17 177 80

601048 19 199 89

616966 1/20” 41 13

616967 3/64” 41 13

616968 7/64” 66 23

616969 9/64” 72 26

611905 1/16” 47 16

611906 5/64” 52 18

611907 3/32” 58 20

611908 1/8” 66 23

611909 5/32” 74 29

611910 3/16” 85 33

611911 7/32” 91 36

611912 1/4” 96 38

611913 5/16” 108 44

611914 3/8” 122 50

611915 7/16” 130 53

611916 1/2” 145 63

616970 9/16” 154 69

616971 5/8” 176 76

616972 3/4” 199 89

616973 7/8” 222 102

616974 1” 275 125

617146 220FH 2.5 - 10 / 7

220/3 (2.5, 3, 4, 5, 6, 8, 10)

617148 220FH 3/32” - 5/16” / 6

220/3 (3/32”, 1/8”, 5/32”, 3/16”, 1/4”, 5/16”)

617149 220FH 3/32” - 3/8” / 7

220/3 (3/32”, 1/8”, 5/32”, 3/16”, 1/4”, 5/16”, 3/8”)

220FH

Set of hexagon wrenches in folding holder

601057 220/3PB 3 - 10 / 6

220/3 (3, 4, 5, 6, 8, 10)

601059 220/3PB 3 - 14 / 8

220/3 (3, 4, 5, 6, 8, 10, 12, 14)

601061 220/3PB 3 - 19 / 10

220/3 (3, 4, 5, 6, 8, 10, 12, 14, 17, 19)

220/3PB

Set of hexagon wrenches in plastic wallet

34

611776 129/1CB 8 - 24 / 12

129/1 (8, 10, 11, 12, 13, 14, 15, 16, 17, 19, 22, 24)

129/1CB

Set of combination wrenches IBEX in carton box

611775 129/1CS 8 - 19 / 8

129/1 (8, 10, 12, 13, 14, 15, 17, 19)

129/1CS

Set of combination wrenches IBEX in carton box

615474 129/1CT 8 - 22 / 8

129/1 (8, 10, 11, 13, 15, 17, 19, 22), CT129

129/1CT

Set of combination wrenches IBEX in bag

A B

615464 470 330

CT129

Empty bag

• Dimension 470 x 330, for article 129,120,130,180,202

• velcro fastening is used for easy opening and closing

• the closing belt is not needed

611774 129/1PH 8 - 19 / 8

129/1 (8, 10, 12, 13, 14, 15, 17, 19)

611967 129/1PH 8 - 18 / 8

129/1 (8, 10, 12, 13, 14, 15, 16, 18)

129/1PH

Set of combination wrenches

IBEX on plastic hanger

L B2 B1 A2 A1

610047 6 113 11 14.5 5 3.5

610048 7 126 12 16.5 5.8 3.8

610049 8 132 14 18.5 6.9 3.8

610050 9 145 15 21 7.3 4

610051 10 157 17 23 7.5 4

610052 11 170 18 24.5 8 4.5

610053 12 176 20 26 8.5 4.7

610054 13 189 20.5 29 8.5 5

610055 14 202 22 31 9 5

610056 15 209 23.5 33 9.5 5.5

610057 16 221 25 35.5 10.5 6

610058 17 228 26 37.5 10.5 6.5

610059 18 247 27.5 39.5 11 7

610060 19 259 29.5 41.5 12 7

610061 20 265 31 43.5 12.5 7.5

130/1

Offset combination wrench



• polished head

• ring part with LIFE profile



129/1 USE

The strength is acting on the flank of mut

to protect its angle

3 drive surface for greater power

100% positioning of the wrench Rewind action without removing the tools

75

L1 L2

600782 17 255 27

600783 19 285 29.5

210/2

Wheel nut wrench




L1 D1 L2 D2

600785 17 260 26 300 12

600786 19 280 28.5 300 12

600787 22 300 32 300 12

600788 24 315 33.5 400 14

600789 27 355 38.5 400 20

600790 30 425 42.5 400 20

600791 32 430 48 400 20

609815 33 430 48 400 20

212/2

Wheel nut wrench




• made according to standard ISO DIN 3112

L

600810 17 19 11/16” 1/2” 370

600811 17 19 22 1/2” 370

600809 17 19 21 23 370

600812 17 19 22 24 370

600813 24 27 30 3/4” 700

600814 24 27 30 32 700

213/6

Four way rim wrench


• lacquered


• made according to standard ISO 6788 (only

metric dimension)

L

619093 10 11 14 17 207

619094 11 12 13 17 207

619095 10 13 14 17 207

619096 11 13 14 17 207

619097 13 17 19 22 207

213/2VDEDP

Insulated four way rim wrench

• double layered - double coloured insulation enable additional safety

• if second layer is visible, replace your VDE tool with the new one.

• head: chrome plated according to EN12540

• controled with electrical test

• made according to standard EN60900

L D1 D2 D3 T1 T2

600696 6 x 7 105 10 11.2 6.3 8 8

600697 8 x 9 105 12.7 14 6.3 9 9

600698 8 x 10 120 12.8 15 6.3 8 8

600699 10 x 11 120 15.5 16.7 6.3 10 10

600700 12 x 13 140 18.2 19.5 8.5 12 12

600717 13 x 17 150 20 24.6 10.5 13 13

600701 14 x 15 140 21.2 22.3 8.5 14 14

600718 14 x 17 150 21.2 24.6 10.5 13 13

600702 16 x 17 150 23.5 24.6 10.5 15 15

607957 16 x 18 100 23.5 25.8 10.5 14 14

600719 17 x 19 160 24.6 27 12.5 16 16

607958 17 x 21 165 24.6 29.3 12.5 16 16

600703 18 x 19 155 25.8 27 12.5 16 16

605043 18 x 21 160 25.8 29.3 12.5 16 16

605044 19 x 22 170 27 31.4 12.5 18 18

607960 19 x 24 160 27 33.7 14.5 20 20

600705 20 x 22 165 29 31.4 12.5 18 18

600706 21 x 23 165 30.3 32.5 14.5 20 20

607962 22 x 24 160 31.4 33.7 14.5 20 20

600707 24 x 26 180 33.7 36 14.5 22 22

600723 24 x 27 190 33.7 37.2 14.5 22 22

600708 25 x 28 200 34.8 38.3 16.5 24 24

607964 27 x 29 200 38.1 40.5 16.5 25 25

617633 27 x 30 200 38.1 41.6 16.5 25 25

600709 27 x 32 200 38.1 44 16.5 27 27

602557 30 x 32 200 41.6 44 16.5 27 27

603128 30 x 36 215 42.6 49.6 18.5 28 28

603129 36 x 41 215 51.6 57.4 18.5 31 31

618575 41 x 46 235 52 57 22 34 34

618576 46 x 50 235 59 63 22 68 68

618577 50 x 55 235 63 68 22 75 75

215/2

Tubular box wrench

• material: chrome molybdenum



• made according to standard DIN 896 (only metric dimension)

37

MULTIMETRI

Analogni in digitalni univerzalni merilniki so zaradi elektri!nih in konstrukcijskih lastnosti namenjeni širokemu krogu uporabnikov. Posebno primerni so za servisne delavnice, elektri!ne, radijske in elektronske stroke ter za delo na terenu. Multimetri MI 705", MI 7053, MI 7054 in MI 7056 imajo obrobo iz gume in tako pove!ano mehansko odpornost, merilni dosegi pa so zaš!iteni pred preobremenitvami pri priklju!itvi na 250V.

MULTIMETERS

Due to electric and constructional features the analogue

and digital universal meters are intended for a wide range

of users. They are especially convenient for repair shops,

electric, radio and electronic professions as well as for the

field work.

Multimeters MI 7051, MI 7053, MI 7054 and MI 7056 are

provided with a rubber border which increases

mechanical resistance.

Ratings are protected against overloads when the meters

are connected to 250 V.

MI7056 MI7006 MI7030 MI7035

TIP/TYPE MI7051 MI7052 MI7053 MI7054 MI7056 MI7006 MI7035 MI7030

Napetost Voltage

"00mV ... "000V

"V ... "000V

3V ... 300V

300V

5V ... "500V

5V ... "500V

30V ... 600V

30 … 600V

"00mV ... "000V

"0V ... "000V

"0mV ... 650V

"0mV ... 650V

3V ... 600V

30V ... 600V

200mV ... "000V

200mV ... 750V

Tok Current

0,"A ... 5A

0,"A ... 5A

30mA ... 3A

-

0,5A ... "5A

0,5A ... "5A

0,3A ... "5A

0,3A ... "5A

50 A ... "A

3mA ... 3A

"0 A ... 30A

" A ... 30A

0,3A ... 30A

60mA ... 30A

200 A ... "0A

200 A ... "0A

Karakteristi!naupornost

Characteristic

resistance

4M 2 k /V

",3 k /V

2,2M ",45 k /V

",33 k /V

20 k /V

6,67 k /V

"0 M 2,2 k /V

" k /V

-

Število merilnih dosegov Number of ratings

23 "0 20 "5 24 6" 2" 28

Upornost x Resistance x

"00,"k,5k,

", "0, "00 "5,"50, ".5k,"50k, (2 )

", "0, "00 ","0,"00 ","0,"00,kx","0,"00

","0,"00 200 … 20M

Nivo dB Level dB

- - - - - -

Indikacija polaritete Polarity indication

- - - - - +,-,~ - +,-

Zaporedje faz Phase sequence

- - - - - - RST -

To!nost Accuracy

2,5 5 2,5 2,5 2,5 ",52,5

2,5 0,5+2d"+2d

Zna!ilnosti Specials features piska!

beeper

-piska!beeper

Popolna zaš!ita

Full

protection

-Avto.

Polariteta Auto.

Polarity

-Avto.

Polariteta Auto.

Polarity

Napajanje Supply

"x9V 6F22 "x",5V R6 "x9V 6F22 "x",5V R6 "x",5V R6 6x",5V R6 2x",5V R6 "x9V 6F22

Dimenzije (mm) Dimensions (mm)

"02x"42x40 "02x"42x40 "02x"42x40 "02x"42x40 "02x"42x40 "00x"65x65 "00x"65+"6x6" "00x"65x55

38

MI7043 MI7045 MI7065

TIP/ TYPE MI7042 MI7043 MI7045 MI7046 MI7065

Napetost

Voltage

"00mV … "000V

3V … "000V

"00mV … "000V

3V … "000V

"20mV … "000V

3V … "000V

"00mV … "000V

"0V … "000V

"00mV … 300V

3V … 300V

Tok

Current

20 A … 3A

"mA … 3A

50 A … 5A

"mA … "0A

240 A … 30A

60mA … 30A

50 A … "A

3mA … 3A

"00 A … 3A

"00 A … 3A

Karakteristi!na upornost #

Characteristic resistance #

50 k /V

5 k /V

20 k /V

3 k /V

5 k /V

5 k /V

20 k /V

6,7 k /V "0M

Število merilnih dosegov Number of ratings

3" 32 27 24 25

Kapacitivnost FCapacity F

- - - - -

Upornost xResistance x

","0,"00,"k,"0k

","0,"00,"k,"0k

","0,"00 ","0,"00 -

Nivo dB Level dB

- -

To!nost Accuracy

2,5 2,5 2,5

",5

2,5 3

2Napajanje Supply

"x",5V R6 "x"5V "0F"5

"x",5V R6 "x"5V "0F"5

"x",5V R6 "x",5V R6 "x9V 6F22

Dimenzije (mm) Dimensions (mm)

96x"32x33 96x"32x33 96x"32+"6x33 96x"32x33 96x"32x33

Pribor: - Plasti!ni etui za tipe MI 7042, ...43, ...45,

...46, ...65, ...30, ...35. - Merilne vezi - Gumijasta zaš!ita za tipe MI 705", ...53, …54 ....56, ...42, ...43, ...46.

Accessories:

- Plastic case for MI 7042, ...43, ...45,

...46, ...65, ...30, ...35 types.

- Measuring connection wires

- Rubber protection for MI 7051, ...53,…54

....56, ...42, ...43, ...46 types.

Ordering Information:

VT30 ............LCD Multifunction Voltage Tester

Specifications subject to change without notice.

Copyright © 2007-2011 Extech Instruments Corporation. All rights reserved including the right of reproduction in whole or in part in any form.www.extech.com 2/22/12 - R3

Features:

• Large backlit LCD display

• LCD AC/DC voltage indication:

6V, 12V, 24V, 50V, 230V, 400V, 690V

• Polarity detection with LEDs for positive and negative DC

• Continuity Test with audible tone

• Two handed operation for low impedance testing

• Built-in flashlight for testing in tight areas

• Rubberized double-molded IP64 housing

• EN61010-1 CAT IV 600V and CAT III 600V safety rating

• Dimensions: 9.4x3x1.6" (240x78x40mm)

Weight: 8.4oz (237g)

• Complete with 2 AAA batteries, protective cap, and pouch case

Voltage, Continuity and Phase Tester with Flashlight and backlitdigital display with bargraph; Double molded IP64 housing

with Built-in flashlight for testing in tight areas

Digital Voltage Tester with Bargraph

Protective cap included

METRISO!5000 A/AK

High-Voltage Insulation Tester3-348-858-03

6/11.01

GOSSEN-METRAWATT GMBH

DQS Certified per

DIN EN ISO 9001 Reg. No.1262

QUALITY MANAGEMENT SYSTEM

Features

Test Voltages to 5000 V

This instrument is suited for the non-destructive measurement of insulation resistance in electrical systems, at machines and trans-formers and in cables, as well as within the electrical equipment of, for example, locomotives, tram systems and ocean going ves-sels, with eight selectable test voltages up to 5 kV.

Voltage Measurement to 2000 V

With the voltage measuring ranges, test objects can be checked for the absence of voltage in networks of up to 2 kV. This is important for insulation resistance measurement, because extra-neous voltages distort measurement results.

Discharge of Capacitive Devices Under Test

Capacitive devices under test such as cables and coils, which might be discharged to test voltage, are discharged by the mea-suring instrument. The drop in voltage can be observed at the needle gauge.

Measurements in accordance with EN 61557 part 1 and 2 (VDE 0413)

Measuring current is equal to 1 mA at a test voltage of 100 V, 250 V, 500 V and 1000 V.

Measurement Cables with Heavy-Duty Insulation

The measurement cables with heavy-duty insulation are perma-nently connected for safety and technical reasons. Possible dan-ger caused by the unintentional removal of cables is thus avoided, for example when charging occurs due to capacitive test objects.

Needle Gauge with LEDs

Three LEDs arranged within the needle gauge make reading eas-ier. The lamp lights up which is located next to the scale, which is assigned to the selected measuring range. During the measure-ment sequence, the green LED indicates whether or not the bat-tery charge is sufficient for the measurement.

Applicable Regulations and Standards

IEC 61010-1EN 61010-1VDE 0411-1

Safety regulations for electrical measurement, control, regulation and lab devices

DIN VDE 0413 part 1

Devices for the testing of safety requirementsfor electrical systemsInsulation measuring devices

IEC 61557EN 61557VDE 0413Part 1 Part 2

Measuring and monitoring facilities for testing the electrical safety in lines with nominal voltages up to AC 1000 V and DC 1500 V– General – Insulation resistance measuring devices

IEC/EN 61326-1 Generic Emission Standard; Electrical equipment formeasurement, control and laboratory use

IEC/EN 61326/A1 Generic Immunity Standard; Electrical equipment formeasurement, control and laboratory use

DIN EN 60529DIN VDE 0470 part 1

Test instruments and test procedures– degree of protection provided by enclosures (IP code)

DIN EN 60051 Direct-acting and direct-display electrical measurement devices and their accessories

• Broad measuring range from 10 k!"to 1 T!

• Easy to read logarithmic display

• Test voltages:

100 V, 250 V, 500 V, 1000 V, 1500 V, 2000 V, 2500 V,

5000 V

• Measurement to 2000 V in accordance with DIN VDE 0413

• Measuring range: 100 k!"to 100 M! (1000 V)

• Voltage measurement to 2000 V ,

• Guard terminal eliminates surface current

• 5 m extension cable as accessory equipment

• Power supply with batteries or hand crank generator (optional)

Applications

Insulation measurement for cables, motors etc.

METRISO!5000 A/AK

High-Voltage Insulation Tester

2 GOSSEN-METRAWATT GMBH

Measuring Ranges

Insulation Resistance

Direct and Alternating Voltage

1) referring to scale length

U-R Diagram for Metriso 5000A

Display

Movement Core-magnet moving-coil mechanism

Scale length 111.5 mm (longest scale)

Reference Conditions

AmbientTemperature +23 #C $2 K

Relative Humidity 45 ... 55%

Meas. QuantityFrequency 50 Hz $10 Hz

(for voltage measurements)

Line VoltageWaveform Sine, deviation between effective

and rectified value < 1%

Battery voltage 8 V"$1%

Operating position Horizontal

Power Supply

Standard orStorage Battery 6 ea. 1.5 V single cell per IEC R20

(6 x D-Size)

Working Range 6 V ... 10 V

Battery Service Life 7500 measurements for test voltage of 1000 V with meas. resistance of 1 M!, 15000 measurements for test voltage of 500 V with meas. resist. of 500 k!,measurement of 5 s – pause 25 s

Crank Generator (optional) 2 to 3 r.p.s. with moderate strength,the LED ! signals sufficient crankfrequency and consequently the vali-dity of measuring values

Nominal Voltage 7.5 V (at approx. 2.5 r.p.s.)

Nominal Power 4 W (at approx. 2.5 r.p.s.)

Ambient Conditions

Operating Temperature 0 #C ... + 40 #C

Storage Temperature %20 #C ... + 60 #C (without batteries)

Relative Humidity max. 75%,condensation must be avoided

Elevation up to 2000 m

Electrical Safety

Protection Class II

Test Voltage 8.5 kV~

OvervoltageCategory 2000 V CAT II

or 5000 V CAT I

Fouling Factor 2

Protection IP 52

Electromagnetic Compatibility (EMC)

Interference emission IEC/EN 61326-1

Interference immunity IEC/EN 61326/A1

Mechanical Design

Dimensions W x D x H: 290 mm x 250 mm x 140 mm

Weight 3.4 kg with batteries

Scale/Standard

Nominal/Open-

Circuit Voltage UN/U0

Meas. range

Nom.

current

IN

S-C

current

IK

Intrinsic

error 1)Deviation

VDE0413

100 V / 250 V500 V / 1000 V

100 k!"

... 100 M!

1 mA 1.3 mA #2.5% #30% of rdg.

100 V / 250 V500 V / 1000 V

10 k!"... 1 T!

1 mA 1.3 mA #5%

1500 V2000 V2500 V5000 V

10 k!"... 1 T!

0.7 mA0.5 mA0.4 mA0.1 mA

1,3 mA #5%

Measuring range Frequency Internal resistance

Max. allowablevoltage

Intrinsic error1)

0 ... 2000 V AC/DC 15 ... 500 Hz 5 M! 2200 V AC/DC max. 10 s

#5%

1

2

2

1

2

GOSSEN-METRAWATT GMBH 3

METRISO!5000 A/AK


Equipment METRISO!5000 A

1 high-voltage insulation tester with permanently

connected measurement cables and test prods,

2 crocodile clips (5 kV version)

and plug-in battery module including batteries

1 carrying strap

1 operating instructions

Equipment METRISO!5000 AK

1 high-voltage insulation tester with permanently

connected measurement cables and test prods,

2 crocodile clips (5 kV version)

and hand crank generator

1 carrying strap

1 operating instructions

Accessories

Hand Crank Generator for retrofit

Carrying Bag F2000

The test instrument, the PSI module, plug inserts, measuring adapter, replacement batteries, recording chart paper, etc., can all be conveniently strored and trans-ported with the F2000 carrying bag.

ISO-Kalibrator 1

Calibration adapter for testing the accuracy of measurement instru-ments for insulation resistances and low impedance resis-tances for test volta-ges up to 1000 V.

Order Information

D) Data sheet available

For further accessories see our Catalog „Measuring Instruments and Testers“.

Designation Type Article Number

High-voltage insulation tester, for battery operation METRISO!5000A M580A

High-voltage insulation tester, for hand crank generator operation METRISO!5000 AK M580C

Universal carrying bagfor METRISO!5000 A/AK, PROFiTEST!0100S-I I or PROFITEST 204 F2000 D) Z700D

1 set (2 ea.) crocodile clip (5 kV version) KY 5000A Z580B

Guard cable with plug, test prodand crocodile clip Guard 5000A Z580C

5 m extension cable Leadex 5000 Z580D

Hand crank generatorfor retrofitting METRISO!5000A to hand crank generator operation Z580A Z580A

Set consisting of: METRISO!5000A, F2000, KY 5000A and 5000A guard METRISO!5000A-Set M580S

Set consisting of: METRISO!5000AK, F2000, KY 5000A and 5000A guard

METRISO!5000AK-Set M580T

Calibration adapter for test voltagesup to 1000 V ISO-Kalibrator 1 M662A

GOSSEN-METRAWATT GMBH

Thomas-Mann-Str. 16-20

D-90471 Nürnberg, Germany

Telephone +49 911 8602-0

Telefax +49 911 8602-669

e-mail: [email protected]

http://www.gmc-instruments.com

Printed in Germany • Subject to change without notice

METRISO!5000 A/AK


Technical Data

Measurement capability

• 600 A ac and dc current measurement with fixed jaw

• 2500 A ac current mea-surement with iFlex™ flexible current probe (sold separately)

• 600 V ac and dc voltage measurement

• True-rms ac voltage and current for accurate measure-ments on non-linear signals

• Frequency measurement to 500 Hz with both jaw and iFlex™ (Fluke 375 only)

• Resistance measurement to 60 k (Fluke 375) or 6000 (Fluke 374) with continuity detection

• Min, max, average and inrush recording to capture varia-tions automatically

• 500 mV dc measurement range to interface with other accessories (Fluke 375 only)

• 1000 µF capacitance measurement

Features

• iFlex™ flexible current probe expands the measurement range to 2500 A ac while providing increased display flexibility, ability to measure awkward sized conductors and improved wire access

• CAT IV 600V, CAT III 1000 V safety rating

• Integrated low pass filter (Fluke 375 only) and state of the art signal process-ing allows for use in noisy electrical environments while providing stable readings

Work horse clamps with increased performance and flexibility

374 and 375 True-rms AC/DC Clamp Meters

The new Fluke 374 and 375 clamp meters offer improved

performance perfect for many current measurement situa-

tions. With true-rms ac voltage and current measurements,

the Fluke 374 and 375 can read up to 600 V and 600 A in

both ac and dc modes. Additionally, both are compatible with

the new iFlex™ flexible current probe (sold separately) which

expands the measurement range to 2500 A ac and pro-

vides increased display flexibility, ability to measure around

awkward sized conductors and improved wire access.

USC

®

2 Fluke Corporation 374 and 375 True-rms AC/DC Clamp Meters

• Proprietary inrush measure-ment technology to filter out noise and capture motor starting current exactly as the circuit protection sees it

• Ergonomic design fits in your hand and can be used while wearing personal protective equipment

Fluke CorporationPO Box 9090, Everett, WA 98206 U.S.A.

Fluke Europe B.V.PO Box 1186, 5602 BD Eindhoven, The Netherlands

For more information call:In the U.S.A. (800) 443-5853 or Fax (425) 446-5116 In Europe/M-East/Africa +31 (0) 40 2675 200 or Fax +31 (0) 40 2675 222 In Canada (800)-36-FLUKE or Fax (905) 890-6866 From other countries +1 (425) 446-5500 or Fax +1 (425) 446-5116 Web access: http://www.fluke.com

©2010 Fluke Corporation. Specifications subject to change without notice. Printed in U.S.A. 7/2010 3801511B D-EN-N

Modification of this document is not permitted without written permission from Fluke Corporation.

Fluke. Keeping your world up and running.®

• Large, easy to read, backlight display automatically sets the correct measurement range so you do not need to change switch positions while taking a measurement

• Three-year warranty• Soft carrying case

Specifications

Fluke 374 and 375 Range Max Resolution Accuracy

AC current via jaw 600 A 0.1 A 2 % ± 5 digits

AC current via iFlex™ (optional) 2500 A 0.1 A 3 % ± 5 digits

DC current 600 A 0.1 A 2 % ± 5 digits

AC voltage 600 V 0.1 V 1.5 % ± 5 digits

DC voltage 600 V0.1 mV (375) 0.1 V (374)

1 % ± 5 digits

Resistance60,000 (375)6000 (374)

0.1 1 % ± 5 digits

Frequency (375 only) 500 Hz 0.1 Hz 0.5 % ± 5 digits

Capacitance 1 µF to 1000 µF 1 µF 1 % ± 4 digits

True-rms •

Continuity •

Hold •

Backlight •

Min/Max •

Inrush •

Low pass filter Fluke 375 only

18 in iFlex™ Flexible Current Probe Optional accessory

10 in iFlex™ Flexible Current Probe Optional accessory

Wire capacity 750 MCM or 2-500 MCM

Safety rating CAT III 1000 V, CAT IV 600 V

Ordering information374 True-rms AC/DC Clamp Meter375 True-rms AC/DC Clamp Meter

Optional accessoriesi2500-10 iFlex™ Flexible Current Probe, 10 inchesi2500-18 iFlex™ Flexible Current Probe, 18 inches

Models Feature Changes

Old model: Fluke 337

New model: Fluke 376 Includes all 337 features plus:• CAT IV 600 V, CAT III 1000 V• iFlex™ 2500 A ac• 1000 V ac/dc

• mV dc• 60 k• 1000 µF


New model: Fluke 375 Includes all 336 features plus:• CAT IV 600 V, CAT III 1000 V• Optional iFlex™ 2500 A ac• mV dc

• 60 k• 1000 µF• Min/Max/Avg

New model: Fluke 374 Includes all 336 features (except low pass filter) plus:• CAT IV 600 V, CAT III 1000 V

• Optional iFlex™ 2500 A ac• 1000 µF• Min/Max/Avg


New model: Fluke 374 Includes all 335 features plus:• CAT IV 600 V, CAT III 1000 V• Optional iFlex™ 2500 A ac

• 600 A ac/dc• 1000 µF• Min/Max/Avg

New model: Fluke 373 Includes all 335 features (except inrush) plus:

• CAT IV 300 V, CAT III 600 V• 1000 µF


New model: Fluke 374 Includes all 334 features plus:• CAT IV 600 V, CAT III 1000 V• Optional iFlex™ 2500 A ac• True-rms

• 600 A ac/dc• 1000 µF• Min/Max/Avg

New model: Fluke 373 Includes all 334 features (except inrush) plus:• CAT IV 300 V, CAT III 600 V

• True-rms• 1000 µF


New model: Fluke 373 Includes all 333 features plus:• CAT IV 300 V, CAT III 600 V• True-rms

• 600 A ac• 6000 • 1000 µF

106

D B L

619881 0 - 150 40 235

270A

Digital vernier

• accuracy: 0,02mm/0,001”

• measuring speed:1.5m/sec

• function: measurement of internal dimensions, of

external dimensions, of depth, of steps

• made according to standard DIN 862

D B L

612035 0 - 150 40 235

271

Vernier

• accuracy: 0,02mm/0,001”

• function: measurement of internal dimensions,

of external dimensions, of depth, of steps


617698

272

External micrometer

• made of quality casting. Measuring surface made of hardened alloy

• spindle 6,5mm dia., with locking lever and ratchet

• according to DIN 863

• measuring range 0 - 25mm, minimal reading 0,01mm


267

L A

619280 160 2

1342

Flat tweezers

• material: stainless steel

L A

619281 155 2

1343

Bent flat tweezers


L A

619282 140 1.5

1344

Flat tweezers


L A

619283 113 1.5

1345

Pointed tweezers


L A

619284 165 2

1346

Bent pointed tweezers


L A

619285 115 1.2

1347

Cross pointed tweezers


L A

619286 120 1

1348

Spade pointed tweezers


L B A

619103 165 19 35

1350VDE

Wedge

• plastic material

L

619099 160

1351VDE

Plastic clamp


L

619100 140

1352VDE

Plastic clamp


V

619935 0.5 l

1375/6

Oil can with flexible spout

V

619936 0.5 l

1376/6

Grease gun

619205

1392

AKU screwdriver

• chuck 1/2”

• Max. torque 350Nm

• free speed: 0 - 1600 rpm

• Capacity cell type: 3,0Ah Ni-Mh

• for usage outside EU region, use corresponding

adapter between charger cord and outlet of your

electrical network.

• Approval: CE

FABRIKA KABLOVSKOG PRIBORA "FEMAN" JAGODINA

12-Sep-12 13:27:50http://www.feman.net/Srpski/Rucni%20alat%20za%20probijanje%20limova%20FAP-10.html

POCETNA INFORMACIJE PROIZVODI KVALITET PREUZIMANJE USLUGE KONTAKT

FEMAN DOO © 2007 Optimizovano za Internet Explorer u rezoluciji 1024 x 768

Plug-in content

ALATI Ručni alat za probijanje limova FAP-10

Alat je namenjen za probijanje limova na komandnim tablama - pultovima za uvodnice, kontrolneinstrumente, lampe, prekidače i dr.Primenom FAP - 10 štedi se vreme, postiče velika preciznost, kvalitet i estetski izgled. Sa FAP -10 alatom mogu se prosecati limovi do 2,5 mm debljine, a ivice prosečenog lima su glatke.Ručnim se mogu prosecati otvori do Pg 36.

Serijski se rade alati dati u tabeli a po želji kupca rade se i sve druge dimenzije i oblici .

Kodnibroj

Oznaka Dimenzijeotvora - mm

Predbušenje Klju čTežinakg/kom

180001118000131800016180002118000291800036

Pg-11Pg-13,5Pg-16Pg-21Pg-29Pg-36

18.820.622.728.537.247.2

111111151515

171717222222

0,120,130,150,230,400,60

Fabrika kablovskog priboravihorska 1 Jagodina tel:+38135230000www.feman.co.yu

english deutsch русский traži

GAS 25 Professional Usisavač za mokro/suho usisavanje Sustavi usisavanja | Bosch električni alati za obrtnike u Hrvatskoj

12-Sep-12 13:32:43http://www.bosch-professional.com/hr/hr/ocs/alati/177543/6152/sustavi-usisavanja/gas-25/

Bosch Hrvatska Bosch električni alati Bosch kućna radinost Bosch vrtni uređaji Bosch pribor Kontakt

Bosch električni alati za obrt i industriju

Upiši traženi pojam

Natrag na pregled

Usisavač za mokro/suho usisavanje

GAS 25 Professional

Prethodni proizvod Slijede ći proizvod

Traženje trgovaca

Najvažniji podaci

Nazivna primljena snaga 1.200 W

Kapacitet 25 l

Maks. podtlak 248 mbar (naventilatoru)

Prednosti Tehni čki podaci obujam isporuke Pribor Upute za uporabu

Prednosti : GAS 25 Professional

Kompaktni usisava č za mobilnu primjenuJednostavni transport i utovar u vozila zahvaljujući naročito kompaktnoj konstrukciji

Trajna snaga usisavanja zbog sustava Plus-clean, elektromagnetskog čišćenja filtra

Produljeni vijek trajanja filtra zahvaljujući uređaju za zaustavljanje punjenja vodom

Automatika daljinskog uključivanja za dodatnu udobnost rukovanja

Meki start za zaštitu protiv preopterećenja kod uključenja

Pražnjenje posude bez ostataka: bez rubova – ništa ne može zapeti

Povećaj Crtež s mjerama Usporedi proizvod

Početna stranica Proizvodi Usluga Vijesti & Ekstra Traženje trgovaca

GAS 25 Professional Usisavač za mokro/suho usisavanje Sustavi usisavanja | Bosch električni alati za obrtnike u Hrvatskoj

12-Sep-12 13:32:43http://www.bosch-professional.com/hr/hr/ocs/alati/177543/6152/sustavi-usisavanja/gas-25/

Internetska trgovina zarezervne dijelove

Naručivanje u svako vrijemedana: odgovaraju ći rezervnidio jednim klikom.

Na vrh stranice Ispiši

Impresum | Tisak

Bosch grupa na cijelom svijetu | Zaposlenja i karijera | Istraživanje i razvoj | Dobava i logistika | Kvaliteta

© Robert Bosch GmbH

GBM 13-2 RE Professional Bušilica Bušilice | Bosch električni alati za obrtnike u Hrvatskoj

12-Sep-12 13:34:49http://www.bosch-professional.com/hr/hr/ocs/alati/101357/5733/busilice/gbm-13-2-re/

BoschHrvatska

Boschelektričnialati

Boschkućnaradinost

Bosch vrtniuređaji

Boschpribor

Kontakt

Boschelektričnialatizaobrtiindustriju

Upiši

Natragnapregled

Bušilica

GBM13-2REProfessional

Prethodniproizvo

Početnastranica

Proizvodi

Usluga

Vijesti & Ekstra

Traženjetrgovaca



od

Sl

pr

zv

Traženjetrgovaca

Najvažnijipodaci

Nazivnaprimljenasnaga

Øbušenjadrva

Øbušenjačelika

Prednosti

Tehni čkipodaci

obujamisporuke

Pribor

Uputezauporabu

Tehni

Povećaj

Crtež smjerama

Usporediproizvod



Prednosti

Tehni čkipodaci

obujamisporuke

Pribor

Uputezauporabu

Nazivnaprimljenasnaga

550 W

Brojokretajaupraznomhodu

0–1.000 /1.900 min-1

Predanasnaga

285 W

Težina

1,9 kg

Nazivnibrojokretaja

550 /1.000 min-1

Nazivnizakret

4,9 /2,5 Nm

Tehničkipodaci:GBM13-2REProfessional

rezervnedijelove

Naručivanjeusvakovrijemedana:odgovarajućirezervnidiojednimklikom.



t

Priključninavojbušnogvretena

1/2"–20UNF

Zakretnimoment,maks.

11,5 /6,0 Nm

Dimenzijeprovrta

Øbušenjaaluminija

20/12 mm

Øbušenjadrva

32/20 mm

Øbušenjačelika

13/8 mm

Funkcije

Višebrzina



Bezstupnjevitoreguliranjebrojaokretaja

Desniilijevihod

Electronic

Informacijaobuci/vibraciji

Mjernevrijednostiutvrđeneuskladu snormomEN60745.Ukupnevrijednostivibracije(vektorskizbrojtripravca)

Bušenjemetala

Emisijskavrijednostvibracijeah

7.5 m/s²



stK

/s²

Tipičnarazinazvukaelektričnogalatana A-skaliiznosi:razinazvučnogtlaka77dB(A);razinazvučnesnage 85dB(A).NesigurnostK= 3dB.

ElectronicIzborbrojaokretajazaprilagodbusvakomradnomuvjetu.

Desni ilijevihodZauvrtanjeiodvrtanjevijaka.

GWS 18 V-LI Professional Akumulatorska kutna brusilica Male kutne brusilice | Bosch električni alati za obrtnike u Hrvatskoj

12-Sep-12 13:35:15http://www.bosch-professional.com/hr/hr/ocs/alati/101278/24267/male-kutne-brusilice/gws-18-v-li/

BoschHrvatska


Boschkućnaradinost

Bosch vrtniuređaji

Boschpribor

Kontakt

Boschelektričnialatizaobrtiindustriju

Upiši

Natragnapregled

Akumulatorskakutnabrusilica

GWS18V-LIProfessional

Prethodni

Početnastranica

Proizvodi

Usluga

Vijesti & Ekstra

Traženjetrgovaca



niproizvod

Traženjetrgovaca

Pogledajtevideo

Najvažnijipodaci

Naponakuulatora


Brusnareznapločapromjer

Povećaj

Crtež smjerama

Usporediproizvod



Prednosti

Tehni čkipodaci

obujamisporuke

Pribor

Uputezauporabu


10.000 min-1

Naponakumulatora

18 V

Težinasakumulatorom

2,3 kg

Radnialat

Brusna/reznaploča,pro

115 mm

Tehničkipodaci:GWS18 V-LIProfessional

Internetskatrgovinazarezervnedijelove




njur,promjer

Informacijaobuci/vibraciji

Mjernevrijednostiutvrđeneuskladu snormomEN60745.Ukupnevrijednostivibracije (vektorskizbrojtripravca)

Brušenjebrusnimlistom


2.5 m/s²

NesigurnostK

1.5 m/s²

Brušenjepovršin



ada)


6.0 m/s²

NesigurnostK

1.5 m/s²

Tipičnarazinazvukaelektričnogalatana A-skaliiznosi:razinazvučnogtlaka82dB(A);razinazvučnesnage 93dB(A).NesigurnostK= 3dB.

Litij -iontehnologijaBezsamopražnje

GSB 18 V-LI Professional Akumulatorske udarne bušilice-izvijači Akumulatorska udarna bušilica-odvijač | Bosch električni alati za obrtnik...

12-Sep-12 13:36:12http://www.bosch-professional.com/hr/hr/ocs/alati/101307/24633/akumulatorska-udarna-busilica-odvijac/gsb-18-v-li/

BoschHrvatska


Boschkućnaradinost

Bosch vrtniuređaji

Boschpribor

Kontakt

Bosc

h

elekt

rični

alati

za

obrtiindustriju

Upiši

Natragnapregled

Akumulatorskeudarnebušilice-izvijači

GSB18V-LIProfessional

Pretho

Početnastranica

Proizvodi

Usluga

Vijesti & Ekstra

Traženjetrgovaca



odniproizvod

Sl

pr

zv

Traženjetrgovaca

Najvažnijipodaci

Naponakumulatora

Promjersvrdlauzidovima

Promjervijakamaks

Povećaj

Crtež smjerama

Usporediproizvod



Pogledajtevideo

Prednosti

Tehni čkipodaci

obujamisporuke

Pribor

Uputezauporabu

Zakretnimoment,maks.(tvrdouvrtanje)

60 Nm

Zakretnimoment,maks.(m

23 Nm

Tehničkipodaci: GSB18 V-LIProfessional

Internetskatrgovinazarezervnedijelove

Naručivanjeusvakovrijemedana:odgov



e)

Brojokretajaupraznomhodu(1.brzina/2.brzina)

0–500 /1.700 min-1

Brojudaraca,maks.

25.500 min-1

Promjerprihvatastezneglave,min./maks.

1,5 /13 mm

Navojbušnogvretena

1/2"

Naponakumulatora

18 V

Težinasakumulatoro

1,6 kg




evizakretnogmomenta

Promjerbušenja

Øbušenjadrva,maks.

32 mm

Promjerbušenjaučelik,maks.

13 mm

Promjersvrdlauzidovima

13 mm

Promjervijaka

Promjervijaka,maks.

8 mm

Funkcije

Više



bušenje

Desniilijevihod

Electronic

AutoLock

Mekanirukohvat

Svjetlo

Auto-LockZanajbržuizmjenupriborajednomrukom.


Desni ilijevihod



vrtanjevijaka.

2brzine

Litij -iontehnologijaBezsamopražnjenja.Bezefektamemorije.

Ostaliproizvodi uovojklasinapona:

Na vrhstranice

Ispiši

Impresum |

Tisak

Bosch grupa

na cijelom

svijetu |

Zaposlenja i

karijera |

Istraživanje i

razvoj |

Dobava i

logistika |

Kvaliteta

© Robert



Bosch

GmbH

FS 450 - Professional 2.1kW-Clearing saw

12-Sep-12 13:39:03http://www.stihl.co.uk/STIHL-Products/Grass-trimmers-Brushcutters-and-Clearing-saws/254-200/FS-450.aspx

Startup page > Products > STIHL Products > FS 450

Technical data

Invaluable for mowing tough grass, scrub or clearingvegetation. The ElastoStart system ensures smooth easystarting. A four point anti-vibration system and fullyadjustable bike handle ensure maximum operator comfort.The long life filter system with compensator and self cleaningeffect considerably extends the intervals between changesfor optimum working time. Available in FS 450 K model with ashort shaft and FS 450 with a standard shaft.

Versions

* Manufacturer's recommended retail price updated as of February 2012. The manufacturer's recommended retailprices are subject to change without notice.

The version(s) available in each country may differ from the above range and specifications; specific details may besubject to change without notice. Please ask your local STIHL Approved Dealer for further information.

Price

Product variations

FS 450 K

Vibration levels left/right with

metal blade m/s² 1) 2.0/1.6

Displacement cm³ 44.3

Power output kW/bhp 2.1/2.9

Weight kg 2) 8.0

Cutting blade AutoCut

Fuel capacity l 0.67

FS 450Professional 2.1kW-Clearing saw

Technical data

FS 450 £874.80*

FS 450 K, Short shaft £874.80*



Sound power level dB(A) 4) 111.0

1) (K) factor according to Dir. 2006/42/EC = 2m/s²

2) without cutting tool and deflector

3) without tool

4) Power factor according to DIR2006/42/EC=2.5(dB(A))

Intense vibration at the handles of power tools can lead to long-term effects on bloodvessels in the hands and arms. STIHL has therefore developed an effective anti-vibration system whereby the oscillations from the machine's engine are dampenedwhich significantly reduces vibrations at the handles.

Anti-vibration system

When used in conjunction with a harness, the bike handle enables a smooth mowingaction. The bike handle allows the machine to be easily guided, making it ideal forworking on large areas and thus reducing fatigue.

Bike handle

STIHL ElastoStart is a special starter handle which ensures a smooth starting processwithout any sudden peak forces. The integral damper smooths the power profile that isgenerated during starting and makes the starting process a lot easier.

STIHL ElastoStart

Using a STIHL shoulder strap or carrying harness with soft padding makes work morecomfortable, particularly during lengthy jobs.

Shoulder strap / carrying system

Easy, comfortable thumb-operated control means the operator's hand never leaves thehandle.

Multi-function control handle

This controller in the carburettor prevents the fuel-air mixture getting richer as the airfilter becomes clogged. The correct quantity of fuel is delivered to the carburettordepending on the quantity of air passing through the air filter. This keeps the fuel/airratio in the combustion mixture constant and hence also the engine power. The filterdoesn't need to be cleaned until an appreciable drop in power occurs.

Compensator

The central wing nut enables easy adjustment without the use of tools. ForTool free handle adjustment


Standard features



The decompression valve allows some of the compression pressure in the cylinder toescape, so less force on the starter rope is needed.

Decompression valve

Perfect transport protection for the engine housing of brushcutters and clearing saws.For FS 38 - FS 450.

Protective cover for brushcutters

Versions


Price

Consists of shredder knife, shredder guard and fastening components. For retrofittingthe FS 360 C-E, FS 410 C-E, FS 460 C-EM and FS 480.

Shredding starter pack

Versions


Price

Soft padding makes work more comfortable during longer jobs.Double shoulder harness

Versions

* Manufacturer's recommended retail price updated as of February 2012. The manufacturer's recommended retail

Price


Accessories

Protective cover for brushcutters £7.50*

For retrofitting the FS 480 £63.00*

For FS 56-FS 550 £40.00*



Integrated hip belt with additional padding that makes the tool even easier to carry.Also suitable for women.

Versions


Price

For double shoulder comfort harness. Without tools.Accessory tool bag

Versions


Price

Excellent protection against flying cuttings or stones. With or without an apron.Universal guard

Versions


Price

Protects the user from flying debris.Stop kit for circular saw blade

Versions


Price

Standard version for FS 56-FS 550 £36.00*

Tool bag £13.50*

FS 90, 100, 130, 240 C-E, RC-E, 480, 130 T, 480 CF £19.00*

For FS 310 - FS 480, 200mm: £24.00*



Versions


Price

Protects the user from flying debris.Stop kit for circular saw blade

Versions


Price

Only approved for shredder knives and brush knives. Protection for when you're notjust working at ground level.

Shredder guard

Versions


Price

Only approved for shredder knives and brush knives. Protection for when you're notjust working at ground level.

Shredder guard

Versions


Price


Special mowing guard £15.00*

For FS 400 - FS 480, 225mm £29.75*

For FS 480 for shredder knife 270-2 £32.50*

For FS 550, for shredder knife 320-2 £55.00*

Binder 1

Documents

Transcript of Binder 1