1

USER GUIDE

Digital Cordless Telephone

THIS EQUIPMENT IS NOT DESIGNED FOR MAKING EMERGENCY TELEPHONE CALLS WHEN THE POWER FAILS. ALTERNATIVE ARRANGEMENTS SHOULD BE MADE FOR ACCESS TO DIAL EMERGENCY SERVICES.

Before operating this set,please read these instructions carefully.

TECHNICAL DETAILSStandard

Frequency range

Channel bandwidth

Operating range

Operating time

Temperature range

Electrical power

Digital Enhanced CordlessTelecommunication (DECT) 1.88 to 1.9 GHz

1.728 MHz

Up to 300m outdoors; up to 50m indoors

Standby: 100 hoursTalking: 10 hoursBattery charge time:15 hoursOperating 0 C to 40 CStorage -20 C to 60 CHANDSET 600mAH NiMH

(bandwidth = 20 MHz)

1.2V rechargeable battery x 2, AAA size.Base UNIT input 230V AC 50Hzoutput 6VDC 200mA.CHARGER POD input 230V AC 50Hzoutput 6V DC 200mA.

Port specification The port (connect to the mains power supply) is a SELV port with respect to EN41003.

The port (connected to the telephoneline) is a TNV port respect to EN41003. with

CLEANING AND CAREDo not clean any part of your Activity 2600 / 2610may cause permanent damage which is not covered by the Guarantee.When necessary, clean it with a damp cloth.Keep your Activity 2600 / 2610 hot, humid conditions or don't let

Every effort has been made to ensure high standards of reliability for your Activity 2600 / 2610if something does go wrong, please repair it yourself consult your supplier or the Helpline.do not try to

system away from

system However,

4

Table of Contents

1 IMPORTANT SAFETY INSTRUCTIONS.............................................................................................................. 4

2 INSTALL YOUR PHONE ...................................................................................................................................... 5

2.1 CONNECT THE BASE STATION...............................................................................................................................2.2 INSTALL AND CHARGE THE BATTERIES .................................................................................................................. 5

3 GET TO KNOW YOUR PHONE ........................................................................................................................... 6

3.1 HANDSET OVERVIEW ............................................................................................................................................ 63.2 BASE STATION OVERVIEW .................................................................................................................................... 73.3 HANDSET LCD DISPLAY ....................................................................................................................................... 73.4 MENU STRUCTURE ............................................................................................................................................... 83.5 TEXT AND DIGIT ENTRY TABLE.............................................................................................................................. 83.5.1 LATIN CHARACTER TABLE ................................................................................................................................... 93.5.2 RUSSIAN CHARACTER TABLE ............................................................................................................................ 103.5.3 GREEK CHARACTER TABLE ............................................................................................................................... 11

4 USE YOUR PHONE............................................................................................................................................ 12

4.1 POWER ON THE HANDSET ................................................................................................................................... 124.2 MAKE AN EXTERNAL CALL.................................................................................................................................. 124.2.1 PREPARATORY DIALING..................................................................................................................................... 124.2.2 DIRECT DIALING................................................................................................................................................ 124.2.3 CALL FROM THE PHONEBOOK ............................................................................................................................ 124.2.4 CALL FROM THE CALL LIST................................................................................................................................. 124.2.5 CALL FROM THE REDIAL LIST.............................................................................................................................. 14.2.6 CALL TIMER...................................................................................................................................................... 124.3 ANSWER A CALL ................................................................................................................................................ 124.4 END A CALL ....................................................................................................................................................... 124.5 ADJUST EARPIECE AND HANDSFREE VOLUME ..................................................................................................... 124.6 MUTE A CALL ..................................................................................................................................................... 124.7 SET THE SILENT MODE ....................................................................................................................................... 124.8 REDIAL .............................................................................................................................................................. 124.8.1 REDIAL A NUMBER FROM THE REDIAL LIST .......................................................................................................... 124.8.2 SAVE A REDIAL NUMBER INTO THE PHONEBOOK .................................................................................................. 134.8.3 DELETE A REDIAL NUMBER ................................................................................................................................ 134.8.4 DELETE THE ENTIRE REDIAL LIST ....................................................................................................................... 134.9 KEYPAD LOCK.................................................................................................................................................... 134.10 FIND HANDSET ................................................................................................................................................. 134.11 MAKE AN INTERNAL CALL................................................................................................................................. 134.11.1 INTERCOM ANOTHER HANDSET ........................................................................................................................ 134.11.2 TRANSFER AN EXTERNAL CALL TO ANOTHER HANDSET ...................................................................................... 134.11.3 SWITCH CALLS BETWEEN AN EXTERNAL CALL AND AN INTERNAL CALL................................................................. 134.11.4 MAKE A 3-WAY CONFERENCE CALL .................................................................................................................. 13

5 PHONEBOOK..................................................................................................................................................... 14

5.1 ADD A NEW ENTRY............................................................................................................................................. 145.2 EDIT AN ENTRY................................................................................................................................................... 14

5.3 VIEW AN ENTRY.................................................................................................................................................. 145.4 DELETE AN ENTRY.............................................................................................................................................. 145.5 DELETE THE ENTIRE PHONEBOOK ....................................................................................................................... 145.6 VIEW PHONEBOOK CAPACITY ............................................................................................................................. 14

6 CALL LIST .......................................................................................................................................................... 15

6.1 VIEW THE CALL LIST........................................................................................................................................... 156.2 STORE A CALL LIST NUMBER INTO THE PHONEBOOK ........................................................................................... 156.3 DIAL A CALL LIST NUMBER................................................................................................................................. 156.4 DELETE AN ENTRY IN THE CALL LIST................................................................................................................... 156.5 DELETE THE ENTIRE CALL LIST........................................................................................................................... 15

7 CLOCK & ALARM .............................................................................................................................................. 17

7.1 DATE & TIME...................................................................................................................................................... 177.1.1 CHANGE DATE FORMAT ..................................................................................................................................... 177.1.2 CHANGE TIME FORMAT...................................................................................................................................... 177.1.3 SET THE DATE .................................................................................................................................................. 177.1.4 SET THE TIME ................................................................................................................................................... 177.2 ALARM............................................................................................................................................................... 177.2.1 TURN OFF THE ALARM ....................................................................................................................................... 177.2.2 SET AND TURN ON THE ALARM ........................................................................................................................... 187.2.3 SET THE ALARM MELODY ................................................................................................................................... 18

8 SETTINGS........................................................................................................................................................... 19

8.1 HANDSET SETTINGS ........................................................................................................................................... 198.1.1 SET THE AUDIO VOLUME ................................................................................................................................... 198.1.2 SET THE INTERNAL RINGER MELODY................................................................................................................... 198.1.3 SET THE EXTERNAL RINGER MELODY.................................................................................................................. 198.1.4 ADJUST THE RINGER VOLUME ........................................................................................................................... 198.1.5 SET THE ALERT TONES...................................................................................................................................... 198.1.6 SET LANGUAGE (OPTIONAL) ..............................................................................................................................8.1.7 RENAME THE HANDSET ..................................................................................................................................... 198.1.8 SELECT A WALLPAPER....................................................................................................................................... 208.1.9 SELECT A COLOR THEME ................................................................................................................................... 208.1.10 SET THE CONTRAST LEVEL .............................................................................................................................. 28.1.11 TURN ON OR OFF THE AUTO ANSWER ............................................................................................................... 208.1.12 SET THE CALL BARRING................................................................................................................................... 208.1.13 SET THE SOS NUMBER ................................................................................................................................... 218.1.14 SELECT BASE STATION .................................................................................................................................... 218.1.15 RESET HANDSET SETTINGS TO DEFAULT........................................................................................................... 218.2 BASE SETTINGS ................................................................................................................................................. 218.2.1 DE-REGISTER A HANDSET ................................................................................................................................. 218.2.2 CHANGE THE DIAL MODE ................................................................................................................................... 218.2.3 CHANGE THE FLASH TIME ................................................................................................................................. 228.2.4 CHANGE THE SYSTEM PIN CODE ...................................................................................................................... 22

9 ANSWERING MACHINE (For Activity 2610 only) ...........................................................................................

9.1 TURN THE ANSWERING MACHINE9.2 LISTEN TO THE MESSAGES IN THE ANSWERING MACHINE ..................................................................................... 239.3 DELETE ALL MESSAGES IN THE ANSWERING MACHINE ........................................................................................ 239.4 RECORD MEMO .................................................................................................................................................. 249.5 ANSWERING MACHINE SETTINGS ........................................................................................................................ 249.5.1 SET THE ANSWER MODE................................................................................................................................... 24

9.5.3 RECORD YOUR OWN OUTGOING MESSAGE (OGM)............................................................................................ 249.5.4 PLAYBACK (OGM)............................................................................................................................................ 249.5.5 SET THE ANSWER DELAY .................................................................................................................................. 259.5.6 SET THE RECORDING TIME OF INCOMING MESSAGE ........................................................................................... 259.5.7 ACTIVATE REMOTE ACCESS .............................................................................................................................. 259.5.8 CALL SCREENING ............................................................................................................................................. 26

10 TROUBLESHOOTING...................................................................................................................................... 27

1 IMPORTANT SAFETY INSTRUCTIONS

When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury, including the following: 1) Read and understand all the instructions. 2) Follow all warnings and instructions marked on the product. 3) Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a

damp cloth for cleaning. 4) Do not use this product near water (for example, near a bath tub, kitchen sink, swimming pool). 5) Do not overload wall outlets and extension cords as this can result in the risk of fire or electric shock. 6) Unplug this product from the wall outlet and refer servicing to Binatone under the following conditions:

• When the power supply cord or plug is damaged or frayed. • If the product does not operate normally by following the operating instructions. • If the product has been dropped and the cabinet has been damaged. • If the product exhibits a distinct change in performance.

7) Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electric shock from lightning.

8) Do not use the telephone to report a gas leak in the vicinity of the leak. 9) Use only the supplied NiMH (Nickel Metal Hydride) batteries! The operation periods for the handsets are only

applicable with the default battery capacities 10) The use of other battery types or non-rechargeable batteries/primary cells can be dangerous. These may

cause interference and/or unit damages. The manufacturer will not be held liable for damage arising from such non-compliance.

11) Do not use third party charging bays. The batteries may be damaged. 12) Please note the correct polarity while inserting the batteries. 13) Do not immerse batteries in water, do not place in fire.

CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS

Package contents The package contains the following items:

The maximum range between the base station and the handset is approximately 300 meters. Depending on the surrounding conditions as well as spatial and structural factors, the range may be reduced. The range indoors is normally less than outdoors.

Single • 1 Handset • 1 Base station • 1 Mains power adapter • 1 Telephone line cord • 2 rechargeable batteries • 1 User manual

Twin • 2 Handsets • 1 Base station • 1 Mains power adapter • 1 Telephone line cord • 4 rechargeable batteries • 1 User manual • 1 Charger pod with a connected

Triple • 3 Handsets • 1 Base station • 1 Mains power adapter• 1 Telephone line cord • 6 rechargeable batteries • 1 User manual • 2 Charger pods with connected

mains power adapter

mains power adapters

Quad• 4 Handsets • 1 Base station • 1 Mains power adapter• 1 Telephone line cord • 8 rechargeable batteries • 1 User manual • 3 Charger pods with connected mains power adapters

1 2 3

5

2

11 . 28DECLARATION OF CONFORMITY................................................................................................................

solvent chemicals this

strong sunlight, and

system with benzene, thinner or other

2 INSTALL YOUR PHONE2.1 Connect the Base Station

1) Plug the power supply & line cord into the base station.

2) Plug the power supply & line cord into the wall socket.

3) Always use the cables provided in the box.

2.2 Install and Charge the Batteries

1) Slide out the battery compartment cover. 2) Place the two supplied batteries as indicated. Respect polarity. 3) Slide the battery compartment cover back. 4) Put the handset on the base and charge the battery for 14 hours first

time. A beep indicates that the handset is properly placed on the base or charger.

Use only the NiMH battery pack provided.

5

3 GET TO KNOW YOUR PHONE 3.1 Handset Overview

EARPIECE UPIn menu mode: Press to scroll up the menu itemsIn Phonebook list / Redial list /Call List: Press to scroll up the listDuring a call: Press to increase the volume

LEFT SOFT KEYIn idle mode: Press to access the main menuIn sub-menu mode: Press to confirm the selectionDuring a call: Press to mute/unmute the microphoneDuring call screening: Press to intercept a call LEFTIn editing/predialling mode:Press to move the cursorone character to the left

TALK ON

Press to make a call

Phonebook entry: Press to make a call to the selected entry in the listDuring ringing: Press to answer a callDuring call screening: Press to intercept a call

ALPHANUMERIC KEYPAD, * (STAR), # (HASH)Press to insert a digit / character / * / #* key in idle mode: Long press to turn on/off the keypad lock* key in editing mode: Long press to switch the character set* key during a call: Short press to switch to tone dialing mode temporarily if using pulse dialing mode currently# key in editing mode: Long press to toggle between uppercase or lowercase character input# key in Idle mode: Long press to turn on / off the ringer0 key in idle / predialing / number editing mode: Long press to insert a pause

SPEAKERPHONEDuring a call: Press to turn on / off the speakerphone.Call List / Phonebook entry: Press to make a call withspeakerphone During ringing: Press to answer a call with speakerphoneDuring answering machine message playback/call screening:Press to play the message via speaker

RIGHT SOFT KEYIn idle mode: Press to access the phonebookIn sub-menu mode: Press to go back to previous levelIn editing / predialing mode: Press to clear a character / digit In editing / predialing mode: Long press to delete all the characters / digit

INTERCOMIn idle mode: Press to access the intercom list to makeinternal call During an external call connection: Long press to initiate a conference between the external call and the internal call

RIGHT/CALL LISTIn Idle: Press to access the call list.In predialling / editing mode: Press to move the cursor one character to the right TALK OFFDuring a call: Press to end a call and go back to idle screenIn menu / editing mode: Press to go back to idle screenIn Idle: Press and hold to power off the handsetWhen the handset is power off: Press and hold to power onthe handset DOWN / REDIAL LISTIn idle mode: Press to access the redial listIn menu mode: Press to scroll down the menu itemsIn Phonebook list / Redial list / Call List: Press to scroll downthe listDuring a call: Press to decrease the volume

RECALL / FLASHIn idle / predialing mode: Press to insert a flash During a call: Press to dial a flash

MICROPHONE

3.2 Base Station Overview

1. PAGE Press the Page on the base station to page your handset. It will ring for approximately 60 seconds. Press any key on the handset except <Silent> or <PAGE> on the base to stop the paging.

2. CHARGING CRADLE 12

3.4 Menu Structure In idle mode, press <MENU> will firstly access the Call List menu. In main menu, press <UP/DOWN> to access other main menu items.

MainMenu

Call List Phonebook Clock/Alarm

HSSettings

Base Settings

Registration Answer Machine

Submenu

(List Empty)OR(Display Call List Entries) Add to PBDeleteDelete All

View AddEditDeleteDelete All PB Status OR(List Empty)AddPB Status

Date & Time Alarm

Audio Setup(Optional)Ring SetupTone SetupLanguageRename HSWallpaperColour ThemeContrastAuto AnswerCall BarringSOS NumberSelect BaseHS Default

Delete HSDial ModeFlash TimeModify PINBS Default

PlaybackDelete AllMemoTAM On/OffTAM Settings

Keys Down/REDIAL Right / Call List Left

Right Soft KeyList Empty or

Display Redial ListList Empty or

Display Call ListList Empty List Empty / Display

Phonebook entries

Sub menu Add to PBDeleteDelete All

Add to PBDeleteDelete All

(List Empty) OR(Display Phonebook Entries)

<UP/DOWN>

<UP/DOWN>

Key Press <MENU> <UP/DOWN>

<UP/DOWN>

<UP/DOWN>

<UP/DOWN>

<UP/DOWN>

<UP/DOWN>

The following menus can be accessed by pressing relevant keys in idle mode:

3. Text and Digit Entry Table The following tables show you where each letter and punctuation character can be found. Every time you press and hold <*> will switch the following character tables. This will be helpful when storing a name in the phonebook and renaming your handset. In editing mode, a cursor is displayed to indicate the current text entry position. It is positioned at the right of the last character entered. Writing Tips: 1. Once a character is selected, the cursor will move to the next position after a short pause. 2. You can move the cursor within the text by <4-way key> to amend the text entry. 3. Press <Clear> to delete the last character. 4. Press and hold <Clear> to delete the entire text string.

3.5.1 Latin Character Table (Uppercase)

(Lowercase)

3.5.2 Russian Character Table (Uppercase)

(Lowercase)

3.

Following icons will be displayed according to the current status of the phone operation.

Icons Description

Steady when the handset is in range of the base. More bars will show when the signal strength is strong.

Flash when the handset is not registered to the base, in marginal range or out of range of the base.

Indicate that the alarm is set. Flash when the alarm time is reached. Turn off when the alarm is off.

Indicate an intercom is in progress.

Indicate a call is in progress. Flash when ringing.

Indicate that handsfree is being used.

Indicate that the ringer is switched off.

Indicate the answering machine is turned on. Turn off if the answering machine is turned off. Flash when the answering machine memory is full.

Indicate when new VMWI message is received.

Indicate that the keypad is locked.

Indicate when the battery is fully charged.

Indicate when the battery is 1/3 charged.

Indicate when the battery is 2/3 charged.

Flash when low battery is detected to indicate that it needs charging.

Animate during charging

3 Handset LCD Display

5

6 7 8 9 10

3.5.3 Greek Character Table (Uppercase)

(Lowercase)

11 13

4 USE YOUR PHONE 4.1 Power on the Handset If your handset is powered off before, press and hold <TALK OFF> to turn on the handset. You can press and hold <TALK OFF> again to power off the handset. 4.2 Make an External Call 4.2.1 Preparatory dialing Enter the phone number and press <TALK ON> or <SPEAKERPHONE> to dial the number. Press <Clear> to clear the entry. 4.2.2 Direct dialing Press <TALK ON> or <SPEAKERPHONE> to take the line and enter the phone number. 4.2.3 Call from the phonebook Press <Right Soft key> to access the phonebook and press <UP/DOWN> to select the desired phonebook entry (if there are entries stored in the phonebook). Press <TALK ON> or <SPEAKERPHONE> to dial out to the selected phonebook entry. 4.2.4 Call from the call list Press <RIGHT> to access the call list and press <UP/DOWN> to select the desired call list entry (if there are entries kept in the call list). Press <TALK ON> or <SPEAKERPHONE> to dial out to the selected call list entry. 4.2.5 Call from the redial list Press <DOWN> to access the redial list and press <UP/DOWN> to select the desired redial number (if there are redial numbers kept in the redial list). Press <TALK ON> or <SPEAKERPHONE> to dial out to the selected redial number. 4.2.6 Call timer Your handset automatically times the duration of every call. It is shown in hours, minutes and seconds format (HH:MM:SS).

4.3 Answer a Call If the handset is not on the charging cradle: When the phone rings, press <TALK ON> / <SPEAKERPHONE> / <Accept> to answer a call.

If the handset is on the charging cradle or the base station and when Auto Answer is set to On: When the phone rings, pick up the handset to answer a call.

4.4 End a Call During a call connection, press <TALK OFF> to end the call. OR Put the handset on the base station to end the call.

4.5 Adjust Earpiece and Handsfree Volume 5 volume levels (Level 1 to Level 5) are provided to choose from for each of earpiece and handsfree volume.

During a call: Press <UP> or <DOWN> to increase or decrease the volume level respectively. The current setting is shown. When you end the call, the volume settings will still remain at the last selected level. 4.6 Mute a Call You can talk to someone nearby without letting the caller hear you during a call. During a call: Press <Mute/Left Soft key> to mute the microphone. Your caller cannot hear you. Press <Unmute/Left soft key> again to unmute the microphone. 4.7 Set the Silent Mode In idle, press and hold <#> to turn off the ringer. The “RINGER OFF” icon is displayed on the LCD.

4.8 Redial You can redial up to 20 of the last numbers called. If you have stored a name in the phonebook to go with the number, the name will be displayed instead. 4.8.1 Redial a number from the redial list 1. Press <DOWN> to access the redial list. 2. Press <UP/DOWN> to browse the redial list. 3. Press <TALK ON> to dial to the selected redial number. Note: If there are no numbers in the redial list, the display shows “List Empty”.

4.8.2 Save a redial number into the phonebook 1. Follow steps 1 and 2 in section 4.8.1. 2. Press <Select> to select the redial number. 3. Press <Menu> and <UP/DOWN> to select Add to PB. 4. Press <Select> to enter the name, edit the number if necessary and select the melody. Note: Press <DOWN> to go to next field to enter the number and press <DOWN> to select the melody by pressing <RIGHT> or <LEFT>. Name and number should be entered in order to save a new phonebook entry. 5. Press <OK> to save the redial number into the phonebook. 4.8.3 Delete a redial number 1. Follow steps 1 to 2 in section 4.8.2. 2. Press <Menu> and <UP/DOWN> to select Delete. 3. Press <OK> to confirm. 4.8.4 Delete the entire redial list 1. Follow steps 1 to 2 in section 4.8.2. 2. Press <Menu> and <UP/DOWN> to select Delete All. 3. Press <OK> to confirm. 4.9 Keypad Lock You can lock the keypad so that it cannot be used accidentally while carrying it around. 1. To lock the keypad: In idle mode, press and hold <*> key, the <Keypad lock icon>will display. 2. To unlock the keypad: In idle mode, press and hold <*> key, the <keypad lock icon> will disappear.

4.10 Find Handset You can locate the handset by pressing <PAGE> on the base station. All the handsets registered to the base will ring up for 60 seconds and “--Paging--” is displayed on the LCD. You can stop the paging by pressing any key on the handset except <Silent / Right soft key> or pressing <PAGE> on the base to stop paging.

4.11 Make an Internal Call This feature is only applicable when there are at least two registered handsets. It allows you to make internal calls, transfer external calls from one handset to another handset and make conference calls. 4.11.1 Intercom another handset 1. Press <INT> and the registered handsets will be listed. Note: If there are no additional handsets registered in the system, press <INT> will display “Unavailable”. 2. Press <the handset number> or <LEFT> or <RIGHT> to select the handset that you want to make an internal

call with. 3. Press <Select>. Note: Press <9> to ring all the registered handsets. 4. The called handset rings and press <TALK ON> on the called handset to establish the internal call. 4.11.2 Transfer an external call to another handset During a call: 1. Follow steps 1 to 3 in section 4.11.1. 2. The external call is put on hold automatically and the called handset rings. 3. Press <TALK ON> / <SPEAKERPHONE> / <Accept> on the called handset to establish an internal call. 4. Press <TALK OFF> on the calling handset to end the current call with the external party. 5. The external call is transferred to the called handset. 4.11.3 Switch calls between an external call and an internal call During a call: 1. Follow steps 1 to 3 in section 4.11.1. 2. The external call is put on hold automatically and the called handset rings. 3. Press <TALK ON> / <SPEAKERPHONE> / <Accept> on the called handset to establish an internal call. 4. Press <INT> on the calling handset to switch the call connection with the external party while putting the internal call on hold. 5. Press <INT> on the calling handset to switch the call connection with the internal party while putting the external call on hold. 4.11.4 Make a 3-way conference call The conference call feature allows one external call to be shared with two handsets (in intercom). The three parties can share the conversation and no network subscription is required. During an external call: 1. Follow Steps 1 to 3 in section 4.11.2. 2. Press and hold <INT> to establish the 3-way conference. Any handset hangs up during a conference call will leave the other handset still in connection with the external call.

5 PHONEBOOKYour phone can store up to 100 private phonebook entries with names and numbers. Each phonebook entry can have a maximum of 24 digits for the phone number and 12 characters for the name.

5.1 Add a New Entry In idle: 1. Press <Menu> and <UP/DOWN> to scroll to phonebook. 2. Press <Select> to access the phonebook menu. 3. Press <UP/DOWN> and <Select> to select Add. 4. Enter the name and press <UP/DOWN> to enter the number and select the melody. Note: You can press and hold <#> to toggle between the uppercase and lowercase letters. Name and phone number are mandatory to enter in order to save it as a phonebook entry. During editing the name, you can also press and hold <*> to toggle among different character sets. 5. Press <DOWN> to access melody and <RIGHT/LEFT> to select the melody. 6. Press <OK> to save the phonebook entry. Note: Once a new entry is added, the phonebook entry will be displayed in alphabetical order. If the same name entry was entered in the phonebook, the screen will display “Name Existed”. 5.2 Edit an Entry Remarks: Applicable if there are phonebook entries in the phonebook. In idle: 1. Press <Menu> and <UP/DOWN> to scroll to phonebook. 2. Press <Select> to access the phonebook menu. 3. Press <UP/DOWN> and <Select> to select Edit. 4. Press <UP/DOWN> and <Select> to select your desired phonebook entry. 5. Enter the revised name, phone number and Melody. 6. Press <OK> to confirm. 5.3 View an Entry Remarks: Applicable if there are phonebook entries in the phonebook. In idle: 1. Press <Right Soft Key> to access the phonebook. 2. Enter the first character of the name by multi-tap. 3. Press <UP/DOWN> to highlight your desired phonebook entry. 4. Press <Select> to view the details of the selected phonebook entry. OR 1. Press <Menu> and <UP/DOWN> to scroll to phonebook. 2. Press <Select> to access the phonebook menu. 3. Press <UP/DOWN> and <Select> to select View. 4. Press <UP/DOWN> to highlight your desired phonebook entry. 5. Press <Select> to confirm. 5.4 Delete an Entry Remarks: Applicable if there are phonebook entries in the phonebook. In idle: 1. Press <Menu> and <UP/DOWN> to scroll to phonebook. 2. Press <Select> to access the phonebook menu. 3. Press <UP/DOWN> and <Select> to select Delete. 4. Press <UP/DOWN> and <Select> to choose the phonebook entry that you want to delete. 5. Press <OK> to confirm or <Back> to cancel. (This step is optional.) 5.5 Delete the Entire Phonebook Remarks: Applicable if there are phonebook entries in the phonebook. In idle: 1. Press <Menu> and <UP/DOWN> to scroll to phonebook. 2. Press <Select> to access the phonebook menu. 3. Press <UP/DOWN> and <Select> to select Delete All4. Press <OK> to reconfirm or <Back> to cancel. 5.6 View Phonebook Capacity In idle: 1. Press <Menu> and <UP/DOWN> to scroll to phonebook. 2. Press <Select> to access the phonebook menu. 3. Press <UP/DOWN> to select PB Status. 4. Press <Select> to display the number of entries remaining in the phonebook memory.

6 CALL LISTThis feature is available if you have subscribed the Caller Line Identification service with your network service provider. Your phone can store up to 30 answered calls and unanswered with date/time information in the call list. The number will be shown on the LCD when the phone is ringing. If the number matches with one of the entries in your private phonebook, the caller’s name stored in the private phonebook will be displayed with the number. Missed calls are marked with an “*” at the beginning of the missed call entry. Once the missed call has been read, the “*” will be removed. If the caller number is withheld, “Withheld” will display. If the caller number is unavailable, “Out Of Area” will display. 6.1 View the Call List All unanswered and answered calls are saved in the call list with the latest call putting at the top of the list. When the call list is full, the oldest call will be replaced by a new call. The unanswered call which has not been read is marked with “*” at the beginning of the missed call entry. 1. Press <RIGHT> to access the call list. OR 1. Press <Menu> to access the main menu and press <UP/DOWN> to select Call List. 2. Press <UP/DOWN> to select the desired entry. 3. Press <Select> to view the details of the call list entry. 6.2 Store a Call List Number into the Phonebook 1. Follow steps 1 to 3 in Section 6.1. 2. Press <Menu> and <UP/DOWN> to select Add to PB. 3. Press <OK> and <UP/DOWN> to enter the name and number. Note: You can press and hold <#> to toggle between the uppercase and lowercase letters. Name and phone number are mandatory to enter in order to save it as a phonebook entry. During editing the name, you can also press and hold <*> to toggle among different character sets. 4. Press <DOWN> to access melody and <RIGHT/LEFT> to select the melody. Note: Name and number are mandatory to enter in order to save it as a phonebook entry. 5. Press <OK> to confirm. 6.3 Dial a Call List Number 1. Follow steps 1 and 2 in Section 6.1. 2. Press <TALK ON> to dial out to the call list number.

6.4 Delete an Entry in the Call List 1. Follow steps 1 to 3 in Section 6.1. 2. Press <Menu> and <UP/DOWN> to select Delete. 3. Press <Select> to confirm. 4. Press <OK> to reconfirm. (This step is optional.)

6.5 Delete the Entire Call List 1. Follow steps 1 to 3 in Section 6.1. 2. Press <Menu> and <UP/DOWN> to select Delete All. 3. Press <Select> to confirm. 4. Press <OK> to reconfirm.

14 1512 16

Re

mo

teo

pe

ratio

nU

sing

a ton

e-diallin

g p

ho

ne, d

ial your h

om

e num

ber

You can

also use th

e cod

es on

the o

ther sid

e of th

is card

Wh

ile your o

utgo

ing

messag

e is playin

g, p

ressK

ey in yo

ur remo

te security cod

eThe default code is 0000. For details of how

to set a new code,

see the User G

uide 8.2.4 of page

1234

Note: Press <

*> key after OGM

playback cannot access your answering m

achine rem

otely. If the 4-digit Remote Access PIN is entered incorrectly three tim

es consecutively, the line w

ill be released automatically.

Note: If your answ

ering machine is sw

itched off, the phone will enter into

the remote access m

ode after 10 rings.You can then enter the 4-digit rem

ote access PIN (Default Rem

ote Access PIN is 0000) to activate the remote access feature.

Activity 2

60

0 / 2

61

0

23.

Activity 2600 / 2610

it get wet.

In idle / predialing mode :

In Redial list / Call List/ (For Activity 2610 only)

Base 1Base 2Base 3Base 4

(For Activity 2610only)

19

0

8.2.5 RESET BASE SETTINGS TO DEFAULT................................................................................................................... 228.3 REGISTRATION ................................................................................................................................................... 22

ON/OFF ........................................................................................................... 23

9.5.2 O MESSAGE (OGM) LABGUAGE ........................................................................................... 24SET THE UTGOING

23

(For Activity 2610 only)

(For Activity 2610 only)

(For Activity 2610 only)

17

8 SETTINGSYour phone comes with a selection of settings that you can change to personalize your phone the way you like it to work. 8.1 Handset Settings 8.1.1 Set the audio volumeIn Idle: 1. Press <MENU> and <UP/DOWN> to select HS Settings. 2. Press <Select> and <UP/DOWN> to select Audio Setup. 3. Press <Select> and <UP/DOWN> to select Speaker Volume or Ear Volume. 4. Press <Select> and <UP/DOWN> or <LEFT/RIGHT> to select the volume level from level 1 to level 5. 5. Press <OK> to confirm. 8.1.2 Set the internal ringer melody In Idle: 1. Press <MENU> and <UP/DOWN> to select HS Settings. 2. Press <Select> and <UP/DOWN> to select Ring Setup. 3. Press <Select> and <UP/DOWN> to select Internal Ring. 4. Press <Select> and <UP/DOWN> to select your desired internal ringer melody (10 ringer melodies and 5 standard tones are provided). Note: The respective ringer melody will be played while browsing the melody list. 5. Press <Select> to confirm. 8.1.3 Set the external ringer melody 1. Press <MENU> and <UP/DOWN> to select HS Settings. 2. Press <Select> and <UP/DOWN> to select Ring Setup. 3. Press <Select> and <UP/DOWN> to select External Ring. 4. Press <Select> and <UP/DOWN> to select your desired internal ringer melody (10 ringer melodies and 5 standard tones are provided). Note: The respective ringer melody will be played while browsing the melody list. 5. Press <Select> to confirm. 8.1.4 Adjust the Ringer Volume In Idle: 1. Press <MENU> and <UP/DOWN> to select HS Settings. 2. Press <Select> and <UP/DOWN> to select Ring Setup. 3. Press <Select> and <UP/DOWN> to select Ring Volume. 4. Press <Select> and <UP/DOWN> or <LEFT/RIGHT> to select your desired ringer volume level from Level 1 to Level 5 or Ringer Off. Note: The respective ringer volume will be played during your selection. If Volume Off is selected, <Ringer Off> icon will display. 5. Press <OK> to confirm. 8.1.5 Set the alert tones A single beep is emitted when you press a key. You can turn on or off the key tone. You can also turn on the alert tones when low battery and out of range are detected. 1. Press <MENU> and <UP/DOWN> to select HS Settings. 2. Press <Select> and <UP/DOWN> to select Tone Setup. 3. Press <Select> and <UP/DOWN> to select Key Tone / Battery Low / Out of Range. 4. Press <Select> and <UP/DOWN> to turn on or off these tones. 5. Press <Select> to confirm. 8.1.6 Set language (Optional) 1. Press <Menu> and <UP/DOWN> to select HS Settings. 2. Press <Select> and <UP/DOWN> to select Language. 3. Press <Select> and < UP/DOWN> to select the desired language.4. Press <Select> to confirm. 8.1.7 Rename the handset 1. Press <Menu> and <UP/DOWN> to select HS Settings. 2. Press <Select> and <UP/DOWN> to select Rename HS. 3. Press <Select> to enter your desired handset name. Press <Clear> to delete one character or press and hold <Clear> to delete the whole character string. Note: The maximum number of characters of handset name is 12. 4. Press <OK> to confirm.

8.1.8 Select a wallpaper 1. Press <Menu> and <UP/DOWN> to select HS Settings. 2. Press <Select> and <UP/DOWN> to select Wallpaper. 3. Press <Select> and <UP/DOWN> to select your desired wallpaper (Two wallpapers are provided). The respective wallpaper will display while browsing the wallpaper list. 4. Press <Select> to confirm. 8.1.9 Select a color theme 1. Press <Menu> and <UP/DOWN> to select HS Settings. 2. Press <Select> and <UP/DOWN> to select Colour Theme. 3. Press <Select> and <UP/DOWN> to select your desired color theme (Four colour themes are provided). The

respective color theme effect will display while browsing the colour theme list. 4. Press <Select> to confirm. 8.1.10 Set the contrast level 1. Press <Menu> and <UP/DOWN> to select HS Settings. 2. Press <Select> and <UP/DOWN> to select Contrast. 3. Press <Select> and <UP/DOWN> to select your desired contrast level (5 contrast levels are provided). The

respective contrast effect will display while browsing the contrast level list. 4. Press <Select> to confirm.

8.1.11 Turn on or off the auto answer 1. Press <Menu> and <UP/DOWN> to select HS Settings. 2. Press <Select> and <UP/DOWN> to select Auto Answer. 3. Press <Select> and <UP/DOWN> to turn on or off the Auto Answer feature. 4. Press <Select> to confirm.

8.1.12 Set the call barring Your phone can set to disable external outgoing calls according to up to four barring numbers. If call barring is activated, internal calls and conference calls are still available. 8.1.12.1 Turn on or off the call barring 1. Press <Menu> and <UP/DOWN> to select HS Settings. 2. Press <Select> and <UP/DOWN> to select Call Barring. 3. Press <Select> to enter the 4-digit system PIN (Default 4-digit system PIN: 0000) Note: If the PIN code is entered incorrectly, “PIN Invalid” will display. 4. Press <OK> to confirm. 5. Press <UP/DOWN> to select Barring Mode. 6. Press <Select> and <UP/DOWN> to turn on or off the call barring. 7. Press <Select> to confirm. Note: If Barring Mode is set to On, “Call Barred” will display in idle. 8.1.12.2 Set the call barring number 1. Follow steps 1 to 4 in Section 8.1.12.1 2. Press <UP/DOWN> to select Call Barring3. Press <Select> and <UP/DOWN> to select Barring Numbers. 4. Press <Select> and <UP/DOWN> to select Bar Number 1/2/3/4. 5. Press <Select> to enter the number for the selected barring number. Note: Each barring number can include up to 4 digits including “*” and “#”. Press <Clear> to delete a digit or press and hold <Clear> to delete the whole barring number. 6. Press <OK> to confirm. Note: If Barring Mode is set to On and Barring Number is set, your phone will check the first 4 digits of your dialing number with the set bar numbers. If the dialing number matched with any one of the set bar numbers, “Call Barred” will display.

8.1.13 Set the SOS number This function allows you to enter a number which is permitted to be called even when the call barring function is enabled. The maximum length of SOS number is 4 digits. 1. Press <Menu> and <UP/DOWN> to select HS Settings. 2. Press <Select> and <UP/DOWN> to select SOS Number. 3. Press <Select> and you are requested to enter the 4-digit system PIN. (Default 4-digit system PIN is 0000). 4. Enter the system PIN. 5. Press <OK> to confirm. 6. Press <UP/DOWN> and <Select> to select SOS Number 1/2/3. 7. Enter the SOS number. 8. Press <OK> to confirm. Note: If the PIN code is entered correctly, the SOS number will be saved and “Saved” will display. If the PIN code is entered incorrectly, “PIN Invalid” will display.

8.1.14 Select base station If your handset is registered to more than one base station, you can select which base station to use. 1. Press <Menu> and <UP/DOWN> to select HS Settings. 2. Press <Select> and <UP/DOWN> to select Select Base. 3. Press <Select> and <UP/DOWN> to select your desired base station. Note: An “*” is marked at the end of the currently used base. 4. Press <Select> to confirm. Note: If the selected base is found successfully, “Saved” will display, otherwise, “Failed” will display. 8.1.15 Reset handset settings to default You can reset your phone to the default settings. After reset, all your settings related to handset will be deleted, but your phonebook entries remain unchanged. 1. Press <Menu> and <UP/DOWN> to select HS Settings. 2. Press <Select> and <UP/DOWN> to select HS Default. 3. Press <Select> to enter the 4-digit system PIN (Default 4-digit system PIN: 0000) 4. Press <OK> to confirm. 5. Press <OK> to reconfirm. Note: If the PIN code is entered correctly and is confirmed to restore the HS settings to default settings, “Reset” will display. If the PIN code is entered incorrectly, “PIN Invalid” will display.

8.2 Base Settings 8.2.1 De-register a Handset You are requested to enter the 4-digit PIN in order to de-register a handset from the base station. The antenna icon on the de-registered handset will be off. Note: You cannot de-register the handset that you are currently using. 1. Press <Menu> and <UP/DOWN> to select Base Settings. 2. Press <Select> and <UP/DOWN> to select Delete HS. 3. Press <Select> and you are requested to enter the 4-digit system PIN. 4. Enter the 4-digit system PIN. 5. Press <OK> and a list of registered handsets is displayed. 6. Press <UP/DOWN> to select one of the handsets that you want to de-register. Note: If handset de-registration is unsuccessful, “Invalid HS” will display. 7. Press <Select> to confirm. Note: If handset de-registration is successfully done, “HS Deleted” will display.

18 19

7.2.2 Set and turn on the alarm In Idle: 1. Press <Menu> and <UP/DOWN> to select Clock/Alarm. 2. Press <Select> and <UP/DOWN> to select Alarm. 3. Press <Select> and <UP/DOWN> to select Alarm On. 4. Press <Select> to enter the alarm time. 5. Press <OK> to confirm the alarm time. 6. Press <UP/DOWN> to select Snooze On or Snooze Off. 7. Press <Select> to confirm.

7.2.3 Set the alarm melody In Idle: 1. Press <Menu> and <UP/DOWN> to select Clock/Alarm. 2. Press <Select> and <UP/DOWN> to select Alarm. 3. Press <Select> and <UP/DOWN> to select Alarm Melody. 4. Press <Select> to select your desired alarm melody. 5. Press <Select> to confirm.

20 21 22

8.2.2 Change the dial mode 1. Press <Menu> and <UP/DOWN> to select Base Settings. 2. Press <Select> and <UP/DOWN> to select Dial Mode. 3. Press <Select> and <UP/DOWN> to select Tone or Pulse. 4. Press <Select> to confirm.

23

9.4 Record Memo You can record your memo message for another user.answering machine messages. Memo recording can still function even when the answering machine is turned off. 1. Press <Menu> and <UP/DOWN> to select Answer Machine. 2. Press <Select> and <UP/DOWN> to select Memo. 3. Press <Select> to start memo recording and “Recording” is displayed. 4. Press <OK> to stop memo recording and save the memo. OR 4. Press <Cancel> to stop memo recording without saving and return back to Answer Machine menu.

9.5 Answering Machine Settings You can use the TAM Settings menu through the handset to change the settings of your answering machine. 9.5.1 Set the Answer Mode By default, the answer machine is set in Answer & Record mode which allows callers to leave a message. This mode can be changed to Answer Only which does not allow callers to leave a message. In that case, your callers will be prompted to call back later. 1. Press <Menu> and <UP/DOWN> to select Answer Machine. 2. Press <Select> and <UP/DOWN> to select TAM Settings. 3. Press <Select> and <UP/DOWN> to select Answer Mode. 4. Press <Select> and <UP/DOWN> to select Answer & Record or Answer Only. 5. Press <Select> to confirm.

9.5.6 Set the Recording Time of Incoming Message You can set the maximum length of the recording time of the incoming messages. 1. Press <Menu> and <UP/DOWN> to select Answer Machine. 2. Press <Select> and <UP/DOWN> to select TAM Settings. 3. Press <Select> and <UP/DOWN> to select Recording Time (Available options: 60 Sec, 120 Sec, 180 Sec, or Unlimited). 4. Press <Select> and <UP/DOWN> to select your desired recording time. 5. Press <Select> to confirm.

9.5.7 Activate Remote Access Your phone lets you check your messages, or otherwise operate your answering machine, by calling the answering machine when you are away from home by entering a 4-digit remote access PIN on a tone-dialing phone. Use the 4-digit remote access PIN code to prevent other people from unauthorized access of your answering machine.

9.5.7.1 Change the 4-Digit Remote Access PIN 1. Press <Menu> and <UP/DOWN> to select Answer Machine. 2. Press <Select> and <UP/DOWN> to select TAM Settings. 3. Press <Select> and <UP/DOWN> to select Chg Remote PIN. 4. Press <Select> to enter the Old remote access PIN (Default Remote Access PIN is 0000). Note: If the Old remote access PIN is incorrect, “Old PIN Invalid” is displayed and will return to Chg Remote PIN menu. 5. Press <OK> to enter the new remote access PIN. 6. Press <OK> to enter the new remote access PIN again. 7. Press <OK> to confirm. Note: If the new remote access PIN entered in Step 6 is not matched with the new remote access PIN entered in Step 5, “New PIN Invalid” is displayed. User is requested to enter the valid remote access PIN again in Step 5.

9.5.7.2 Activate or Deactivate the Remote Access 1. Press <Menu> and <UP/DOWN> to select Answer Machine. 2. Press <Select> and <UP/DOWN> to select TAM Settings. 3. Press <Select> and <UP/DOWN> to select Remote Access. 4. Press <Select> and <UP/DOWN> to select On or Off to turn on or off the remote access respectively. 5. Press <Select> to confirm.

9.5.7.3 Access Your Answering Machine Remotely You can ring your Activity 2610 from another tone-dialing phone to switch on or off the answering machine

1. Place a call from a tone-dialing phone to your Activity 2610. 2. When the answering machine answers the calls and during playing the OGM, press <KEY *>. Note: Enter the * while OGM is still playing and proceed the following in order to access the answering machine remotely. 3. Enter the 4-digit Remote Access PIN. Note: Press <*> key after OGM playback cannot access your answering machine remotely. If the 4-digit Remote Access PIN is entered incorrectly three times consecutively, the line will be released automatically. 4. Press the following keys to carry out your desired function.

Functions Keys While message is not playing While message is playing

2 Delete the current message playback 4 Repeat playing the current message from the

beginning. Press twice to skip backward to play the previous message.

5 Play the message Stop the current message playback 6 Skip to play the next message 7 Turn on the answering machine 8 Stop the current message playback 9 Turn off the answering machine * Enter the 4-digit remote access PIN

Note: If your answering machine is switched off, the phone will enter into the remote access mode after 10 rings. You can then enter * followed by the 4-digit remote access PIN (Default Remote Access PIN is 0000) to activate the remote access feature. When your answering machine memory is full and the answer mode is in Answer & Record, the answer mode will change to Answer Only automatically. It will change to Answer & Record mode automatically after some messages have been deleted.

9.5.8 Call Screening When the answering machine is on and takes a call, you can listen to the caller leaving a message. You can then identify the caller and decide whether to take the call in person. If the answering machine is set to ON, when there is an incoming message, the handset will display “Screen?”1. Press <OK> to start call screening. The handset who picks up the call can listen. You can listen to who is leaving the message and decide whether to pick up the call or not. 2. The handset will display “Screening”. 3. You can adjust the speaker volume by pressing <UP or DOWN>. OR 3. Press <Back> to return to previous screen and you cannot hear the recording. At any time if you want to pick up the call, you can press <PickUp> or <TALK ON> and the message recording will be stopped automatically. If the answering machine is in the process of recording, the message already stored will be saved.

24 25 26 27 28

9.5.3 Record Your Own Outgoing Message (OGM) You can record your own OGM for Answer & Record mode or Answer Only mode. When you record your own OGM, it will be used when the answering machine answers the call. 1. Press <Menu> and <UP/DOWN> to select Answer Machine. 2. Press <Select> and <UP/DOWN> to select TAM Settings. 3. Press <Select> and <UP/DOWN> to select OGM Settings. 4. Press <Select> and <UP/DOWN> to select Answer & Record or Answer Only. 5. Press <Select> and <UP/DOWN> to select Record. 6. Press <Select> to start recording your personalized OGM and “Recording” is displayed on the screen. 7. Press <OK> to stop and save your personalized OGM or press <Cancel> to return to previous screen without saving the personalized OGM. Note: Any subsequent newly recorded OGM will overwrite the previously recorded OGM. After the recorded OGM is saved, the phone will playback the newly recorded OGM automatically.

9.5.4 Playback (OGM) You can playback your own personalized OGM or the pre-set OGM for Answer & Record mode or Answer Only mode. 9.5.4.1 Playback the OGM 1. Press <Menu> and <UP/DOWN> to select Answer Machine. 2. Press <Select> and <UP/DOWN> to select TAM Settings. 3. Press <Select> and <UP/DOWN> to select OGM Settings. 4. Press <Select> and <UP/DOWN> to select Answer & Record or Answer Only. 5. Press <Select> and <UP/DOWN> to select Playback. 6. Press <Select> to playback your personalized OGM (if you have recorded a personalized OGM before) and “Playing” is displayed on the screen. 7. Press <Back> to stop the OGM playback and return to the previous menu. Note: If a personalized OGM is not recorded before, the pre-set OGM will be played.

9.5.4.2 Restore to default OGM 1. Repeat Steps 1 to 4 in Section 9.5.4.1 2. Press <Select> and <UP/DOWN> to select Default. 3. Press <Select> and <OK> to confirm restoring to default OGM.

9.5.5 Set the Answer Delay You can set the number of rings before the answering machine answers and starts playing your OGM. You can set the answering machine to answer after two to nine rings or Time Saver. 1. Press <Menu> and <UP/DOWN> to select Answer Machine. 2. Press <Select> and <UP/DOWN> to select TAM Settings. 3. Press <Select> and <UP/DOWN> to select Answer Delay (Available options: 2 Rings, 3 Rings, 4 Rings, 5

Rings, 6 Rings, 7 Rings, 8 Rings, 9 Rings or Time Saver). 4. Press <Select> and <UP/DOWN> to select your desired answer delay. 5. Press <Select> to confirm.

1

If you have difficulty with your phone, please try the suggestions listed below.

Problem Cause Solutions

No dialing tone when pressing <TALK ON> key

a. The connection cord of the base station is not plugged in.

b. The adapter cord is not plugged in correctly in the base station.

c. The line is busy, as another handset is used.

d. Wrong connection cord (no Euro AS)

a. Check the connections. Unplug and plug back in the mains. Check that the telephone line cord has been plugged into the base station and the phone socket.

b. Check the base station plug and the 220V plug (remove and plug-in).

c. Wait until the line is unoccupied. d. Use the original connection cord.

When connect to a PBX, no and/or wrong connection after dialing. Dialing prefix is needed. Insert the dialing prefix

"Searching" is displayed. Base station out of range. Base station not connected to mains.

Reduce the range. Connect base station to mains.

The call does not work. Service not activated or wrong operator or wrong setting

Check your Subscription with network or change the dial mode.

No display. Empty battery Recharge battery

Please contact the technical support of the network provider for further information.

This telephone is not equipped with a grounding function! Therefore some of the functions may be limited when used in PBX systems.

Technical Support

CONFORMITY This unit conforms to the following rules and regulations: 1995/5/EC Radio frequency and telecommunication equipment and the mutual acceptance of conformity. The CE mark proves the above.

If the fault persists...Disconnect all other instruments connected to the same line as the Activity 2600 / 2610 and try to make a call.Disconnect the base unit from the telephone line and plug a different phone into the master telephone socket. Try making a call. If this works, the line is OK. If the call does not work, and you are using a two-way socket adapt er, remove it and plug a telephone directlyinto the socket. If the call now works, the adapter may be faulty.

If you still cannot identify the cause of the problem, please read out the serial number of this telephone to the Binatone Customer Service Center. The serial number can be found in the battery compartment after having the batteries removed. For technical support, call Binatone Customer Service at 0845 345 9677 (UK only).

If you cannot make a call, the fault may be on the

exchange line. Contact the service provider (the BT engineers on 151 for UK only, or your cable company).

0 TROUBLESHOOTING

Func

tions

K

eys

Whi

le m

essa

ge is

pla

ying

2

D

elet

e th

e cu

rren

t mes

sage

pla

ybac

k

4

Rep

eat p

layi

ng th

e cu

rren

t mes

sage

5 P

lay

the

mes

sage

S

top

the

curr

ent m

essa

ge p

layb

ack

6

Ski

p to

pla

y th

e ne

xt m

essa

ge

7

8

Sto

p th

e cu

rren

t mes

sage

pla

ybac

k 9

Turn

off

the

answ

erin

g m

achi

ne

* E

nter

the

4-di

git r

emot

e ac

cess

PIN

from

the

begi

nnin

g. P

ress

twic

e to

sk

ip b

ackw

ard

to p

lay

the

prev

ious

m

essa

ge.

Turn

on

the

answ

erin

g m

achi

ne

Whi

le m

essa

ge is

not

pla

ying

11 DECLARATION OF CONFORMITY

The conformity to the requirements is validated by the symbol.

NOTE: In compliance with Directive 2002/96/EC, when you purchase a product that comes

with the symbol shown on the right, you are required to dispose of electrical and electronic equipment by separate waste collection and you cannot dispose of the product as normal waste. This equipment and all its components, subsystems and consumable materials formed an integral part of this product and when you decide to dispose of them you have to takethem to the local recycling centres for appropriate waste disposal, in compliance with the current regulations. Details about the location of these centres can be obtained from your local authority.

We the manufacturer / Importer : : Binatone Telecom Plc 1 Apsley Way London

Declare under our sole responsibility that the following productType of equipment: Digital cordless telephoneModel Name: Country of Origin: ChinaBrand:complies with the essential protection requirements of R&TTE Directive 1999/5/EC on the approximation of

the Member States relating to Radio Spectrum the approximation of the laws of the Member Statesrelating to electromagnetic compatibility (EMC) and the European

Community Directive 2006/95/EC relating to Electrical Safety.

Assessment of compliance of the product with the requirements relating to the essential requirements according to Article 3 R&TTE was based on Annex III of the

Directive 1999/5/EC and the following standard:

Radio Spectrum: EN 301406: V1.5.1:2003; EMC: EN 301489-1:V1.5.1:2005;

EN 301489 - 6:V1.2.1;2002; Electrical Safety: EN 60950 - 1:2006.

Manufacturer / Importer(signature of authorized person)

03 Apr 2008 Date Signature

NW2 7HF.

Binatone

Binatone

the laws of Matters, the Council Directive 89/336/EEC on

Activity 2600 / 2610 Series

UK (BTP) Ver 1, Jul 2008

31

and listen to your messages remotely.

7 CLOCK & ALARMYou can set date and time in different format as well as an alarm time with your Activity 2600 / 2610. 7.1 Date & Time 7.1.1 Change date format In Idle: 1. Press <Menu> and <UP/DOWN> to select Clock/Alarm. 2. Press <Select> and <UP/DOWN> to select Date & Time. 3. Press <Select> and <UP/DOWN> to select Date Format. 4. Press <Select> and <UP/DOWN> to select your desired date format from DD-MM-YYYY or MM-DD-YYYY 5. Press <Select> to confirm.

7.1.2 Change time format In Idle: 1. Follow steps 1 to 2 in Section 7.1.1. 2. Press <Select> and <UP/DOWN> to select Time Format. 3. Press <Select> and <UP/DOWN> to select your desired time format from 12 Hours or 24 Hours. 4. Press <Select> to confirm.

7.1.3 Set the date In Idle: 1. Follow steps 1 to 2 in Section 7.1.1. 2. Press <Select> and <UP/DOWN> to select Set Date. 3. Press <Select> to enter the date according to the date format you set in Section 7.1.1 Note: If incorrect input is detected, an error tone will be emitted , the date will not be saved and you can try again

4. Press <OK> to confirm.

7.1.4 Set the time In Idle: 1. Follow steps 1 to 2 in Section 7.1.1. 2. Press <Select> and <UP/DOWN> to select Set Time. 3. Press <Select> to enter the time according to the time format you set in Section 7.1.2. Note: If incorrect input is detected, an error tone will be emitted and the cursor will stop at the incorrect input. 4. When the cursor is at the AM/PM field, press <UP/DOWN> to select AM or PM. Note: Time input is time format dependent. Use 24 hours input if time format is 24 hours. 5. Press <OK> to confirm.

7.2 Alarm You can use this phone to set an alarm clock. When an alarm is set, the <ALARM Icon> displays on the LCD. When the alarm time is reached, the <ALARM icon> and “Alarm On” flash on the LCD ringing with the alarm melody for a duration of 45 seconds. You can press any key to disable the alarm. If snooze function is activated, the alarm will sound again at the end of the snooze period of two minutes. When the alarm time is reached, you can press <Off> or <TALK OFF> to disable the alarm or press <Snooze> to activate the snooze. Note: a. Key press is still applicable if handset keypad is locked and when the alarm time is reached. b. The alarm volume level is the same as the settings of the handset ringer volume. If the handset ringer is set to

Volume Off, the alarm still sounds at Volume 1 level. c. During an external call or internal call, if an alarm is set and when the alarm time is reached, the <ALARM

icon> and “Alarm On” will still flash. Once user presses any key to activate the snooze or press <Off> or <TALK OFF> to disable the alarm, it will revert to the call duration screen.

d. During ringing, the alarm will not sound when the alarm time is reached. However, if snooze function is enabled, the alarm will sound again at the end of the snooze period provided that it is not ringing or in paging mode at the end of the snooze period.

7.2.1 Turn off the alarm In Idle: 1. Press <Menu> and <UP/DOWN> to select Clock/Alarm. 2. Press <Select> and <UP/DOWN> to select Alarm. 3. Press <Select> and <UP/DOWN> to select Alarm Off. 4. Press <Select> to confirm.

to enter a valid date.

8.2.3 Change the Flash Time The flash time settings is country dependent. Please contact your local service provider for the correct settings. 1. Press <Menu> and <UP/DOWN> to select Base Settings. 2. Press <Select> and <UP/DOWN> to select Flash Time. 3. Press <Select> and <UP/DOWN> to select your desired flash time (Short, Medium, Long). 4. Press <Select> to confirm.

8.2.4 Change the System PIN Code A 4-digit system PIN code is used for changing the system settings of the base station. It is used to protect your phone against unauthorized use. The default system PIN code is 0000. 1. Press <Menu> and <UP/DOWN> to select Base Settings. 2. Press <Select> and <UP/DOWN> to select Modify PIN. 3. Press <Select> and you are requested to enter the 4-digit system PIN. 4. Enter the old system PIN. Note: If the old system PIN is incorrect, “Old PIN Invalid” is displayed and will return to Modify PIN menu. 5. Press <OK> and enter the new system PIN. 6. Press <OK> and enter the new system PIN again. Note: If the new PIN entered in Step 6 is not matched with the new system PIN entered in Step 5, user is requested to enter the valid system PIN again in Step 5. 7. Press <OK> to confirm.

8.2.5 Reset base settings to default You can reset your phone to the default settings. After reset, all your settings related to base unit will be deleted, but your phonebook entries remain unchanged. 1. Press <Menu> and <UP/DOWN> to select Base Settings. 2. Press <Select> and <UP/DOWN> to select BS Default. 3. Press <Select> to enter the 4-digit system PIN (Default 4-digit system PIN: 0000) 4. Press <OK> to confirm. 5. Press <OK> to reconfirm. Note: If the PIN code is entered correctly and is confirmed to restore the Base settings to default settings, “Reset” will display. If the PIN code is entered incorrectly, “PIN Invalid” will display.

8.3 Registration Your handset and base station is pre-registered. Up to If for some reason, the handset is not registered to the base station (<Antenna icon> is flashing), register your handset according to the following procedure. 1. Press and hold <PAGE> on the base station for about five seconds, the base station is entered into registration

mode. 2. Press <Menu> and <UP/DOWN> to select Registration. 3. Press <Select> and <UP/DOWN> to select the base station. 4. Press <Select> to enter the 4-digit system PIN. 5. Press <OK> to confirm. If the handset registration is successful, you will hear a confirmation tone and will return to idle screen. The <antenna icon> will stop flashing. The handset will automatically be allocated the next available handset number. This handset number is shown in the handset display in standby mode. The base station that is successfully registered is in bold in the Registration menu.

five handsets can be registered to a single base station.

9 ANSWERING MACHINE (For Activity 2610 Olny)

9.2 Listen to the Messages in the Answering Machine When new messages are recorded on the answering machine, Old messages will be played after all new messages are played completely.

1. Press <Menu> and <UP/DOWN> to select Answer Machine. 2. Press <Select> and <UP/DOWN> to select Playback. 3. Press <Select> to start new message playback and the screen displays the date and time information of the

message received. Remarks: An asterisk is placed at the beginning of the new message number to indicate that it is a new message. If this message has been read or listened, the <STAR icon> will disappear and will be reflected next time when you listen to this message again. During message playback, press <UP> or <DOWN> to increase or decrease the message playback volume respectively. Note: After new message is played, the new message will be saved as an old message automatically unless it is deleted. 4. Press <Menu> and <UP/DOWN> to select Stop, Next, Previous or Delete 5. Press <Select> to perform the following functions during message playback.

Stop: Stop the current message playback and return to the Answer Machine menu. Next: Skip to play the next message. The date and time information of the next message will display if there is next message. Previous: Skip to repeat playing the current message from the beginning. The date and time information of the current message will display. Delete: Delete the current message and the next message will be played.

Note: Alternatively, you can use the following shortcut keys on handset to control different operation during message playback. Press <Key 5> to stop message playback. Press <Key 4> once to skip to repeat playing the current message from the beginning. Press twice to skip backward to play the previous message. Press <Key 6> to skip to play next message. Press <Key 2> to delete the current message playback.

9.3 Delete All Messages in the Answering Machine 1. Press <Menu> and <UP/DOWN> to select Answer Machine. 2. Press <Select> and <UP/DOWN> to select Delete All. 3. Press <Select> to confirm. 4. Press <OK> to delete all old messages. (Note: New messages will not be deleted).

Your phone includes a telephone answering machine (TAM) that records unanswered calls when it is on.The answering machine can store up to 59 messages within the maximum recording time of approximately 12 minutes.As well as recording incoming messages, you can record memos for other users of your phone. If the answering

the <TAM On> icon will flash. machine memory is full, Turn the Answering Machine On/Off

You can turn the answering machine on or off using the handset menu. When the answering and is in Answer & Record mode, calls will be answered after the set

When the answering machine is set to OFF, calls will be answered after 10 rings and the be played to your callers. They will not be able to leave you a message.

9.1

answer delay and theyou a message.

machine is set to ONcaller can then leave

answer only message will

1. Press <Menu> and <UP/DOWN> to scroll to Answer Machine. 2. Press <Select> and <UP/DOWN> to scroll to TAM On/Off. 3. Press <Select> and <UP/DOWN> to scroll to On or Off. 4. Press <OK> to confirm. If answering machine is set to On, If answering machine is set to Off, the <TAM ON> icon will not be on the handset display.

the <TAM ON> icon will be shown on the handset display.

the message can be played back in the same way as

LanguageThe answering machine announces the outgoing message when it answers a call. There is a pre-set OGM for each

Answer & Record mode or Answer Only mode. You may be able to OGMs.

9.5.2 Set the Outgoing Message (OGM)

of select a different language for your default

1. Press <Menu> and <UP/DOWN> to scroll to Answer Machine. 2. Press <Select> and <UP/DOWN> to scroll to TAM Settings. 3. Press <Select> and <UP/DOWN> to scroll to TAM Language. 4. Press <Select> and <UP/DOWN> to scroll to your desired OGM language, if available. 5. Press <Select> to confirm the language.

The default remote access PIN is 00000.

29 30