BH400/ BH500 SERIES · 2020-01-20 · 31 50081249 Bushing, 1.145’’ x 2” x 2.69” 2 32...

Published

PARTS MANUALSECTION 123

Important Operatingand Safety Instructionsare found in the MowerSafety Video that canbe instantly accessedon the internet at:www.algqr.com/bve

An Operator’s Manual was shipped with theequipment. The Operator’s Manual is an integralpart of the safe operation of this machine andmust be maintained with the unit at all times.READ, UNDERSTAND, and FOLLOW theSafety and Operation Instructions contained inthis manual before operating the equipment. Ifthe Operator’s Manual is not with the equipment,contact your dealer or Bush Hog to obtain a copybefore operating the equipment.

11/19

BH400/ BH500

SERIESMODELS

BH416, BH417, BH516

©2019 Alamo Group Inc.

To the Owner/Operator/Dealer

All implements with moving parts are potentially hazardous. There is no substitute for a cautious, safe-mindedoperator who recognizes the potential hazards and follows reasonable safety practices. The manufacturer hasdesigned this implement to be used with all its safety equipment properly attached to minimize the chance ofaccidents.

BEFORE YOU START! Read the safety messages on the implement and shown in your manual. Observe the rulesof safety and common sense!

WARRANTY INFORMATION:Read and understand the complete Warranty Statement found in this Manual. Fill out the Warranty RegistrationForm in full and return it to within 30 Days. Make certain the Serial Number of the Machine is recorded on theWarranty Card and on the Warranty Form that you retain.

Bush Hog Land Maintenance Parts

TABLE OF CONTENTS

BH400/BH500 SERIES ROTARY CUTTERS

BH416, BH417, BH516

DESCRIPTION .............................................................................PAGE NUMBER

Front and Rear Chains, Single Row (BH416, BH417).................................123-1-1

Front and Rear Chains, Double Row (BH416, BH417) ...............................123-1-2

Front and Rear Chains, Double Row (BH516) ............................................123-1-3

BH416 Base Frame Assembly ......................................................123-1-4, 123-1-5



Gearbox Assembly BH416 ..........................................................................123-2-1



Driveline Assembly BH416 .........................................................................123-3-1

Driveline Assembly BH417, BH516 .............................................................123-3-2

Hydraulic Bundle (BH417) ...........................................................................123-4-1

Ratchet Assembly (BH417) .........................................................................123-4-1

Hitch Assembly, (ALL MODELS) ..................................................123-4-2, 123-4-3

Single Tailwheel and Related Parts, (BH416, BH516)..................123-4-4, 123-4-5

Dual Tailwheel and Related Parts BH417.....................................123-4-6, 123-4-7


123-1-1

FRONT and REAR CHAINS

SINGLE ROW

BH416, BH417

1%

1@1#1$ 1@1#1$

qw

re

tiu y

1!

o i1)

y


REF. PART DESCRIPTION QTY.

NO. NO. REQ’D.

1 50080446 Front Chain Assy. BH416 1

50080496 Front Chain Assy. BH417 1

2 50017212 Chain, 7 Link *

3 ———— Chain Bracket, Front 1

4 50070049 Retainer Rod, Front BH416 1

50070112 Retainer Rod, Front BH417 1

5 50080450 Rear Chain Assy. LH, BH416 1

50080493 Rear Chain Assy. LH, BH417 1

6 50018912 Chain, 4 Link *

7 ———— Rear Chain Bracket, LH 1

8 50080455 Retainer Rod, Rear, BH416 2

50080753 Retainer Rod, Rear, BH417 2

9 50080448 Rear Chain Assy. RH, BH416 1

50080492 Rear Chain Assy. RH, BH417 1

10 ———— Rear Chain Bracket, RH 1

11 44109BH Carriage Bolt, 3/8”x 1” Gr.5 *

12 15915BH Flatwasher, 3/8” *

13 15812 Lockwasher, 3/8” *

14 8151200 Hex Nut, 3/8” *

15 5161212 Carriage Bolt, 3/8 x 1-1/4” G5 ZP *

*As Required



DOUBLE ROW

BH416, BH417

123-1-2

1%

1@1#1$ 1@1#1$

qw

re

tiu y

1!

o i1)

y



NO. NO. REQ’D.


50080497 Front Chain Assy. BH417 1

2 82546 Chain, 13 Link *



50070112 Retainer Rod, Front BH417 1


50080495 Rear Chain Assy. LH, BH417 1

6 50017212 Chain, 7 Link *



50080753 Retainer Rod, Rear, BH417 2


50080494 Rear Chain Assy. RH, BH417 1


11 44109BH Carriage Bolt, 3/8”x 1” Gr.5 *


13 15812 Lockwasher, 3/8” *

14 8151200 Hex Nut, 3/8” *

15 5161212 Carriage Bolt, 3/8” x 1-1/4” G5 ZP *

*As Required

123-1-3



DOUBLE ROW

BH516


1!

1@1# 1$1@1#1$

qw

re

tiu y

1!

o i1)

y


NO. NO. REQ’D.


2 82546 Chain, 13 Link *




6 50017212 Chain, 7 Link *





11 5161212 Carriage Bolt, 3/8”x 1-1/4” Gr.5 *


13 15812 Lockwasher, 3/8” *

14 8151200 Hex Nut, 3/8” *

*As Required

123-1-4


BASE FRAME ASSEMBLY

MODEL BH416 ROTARY CUTTER


q

1*

2)2#

2^

2@

2$2*

2&2@

3)

1(2%

1#

o

i

1!1)

1@

3#

1%1$

1^ 3! 3@1&

2(

r

we

y t3$

u

2!

3%3^ 4)

3(

3*3&

4@

underneath

4!

123-1-5


BASE FRAME ASSEMBLY



NO. NO. REQ’D.

1 ——- Deck Weldment, BH416 1

2 00790752BH Gearbox Assembly 1

3 50062095 Input Shield 1

4 20299 Locknut, 3/4” Flng Gr. R 6

5 44216 Flatwasher, M8 ZP 4

6 90560 Capscrew, M8 x 1.25 x 15 G8.8 w/Patch 4

7 50076881 Pan Weldment 1

8 63607 Blade Bolt Kit 1

9 7919BH Blade Bolt 2

10 20322 Lockwasher, 1-1/8” CP 2

11 252BH Jamnut” 1-1/8” NF 2

12 7555BH Blade, 5’ Uplift 2

50080466 Blade, 5’ Parallel Uplift, 22.25’’, CCW 2

13 50035829 Owners Manual Tube 1

14 70418 Castle Nut, M36 x 3 1

15 00786157 Washer, Spring 36mm 1

16 2850005 Klik Pin, 7/16” x 1-3/4” 2

17 50080167 Hitch Pin, 1-1/8” x 7” 2

18 50080370 Decal, BH - Reflective (order separately) 2

19 50074259 Decal, Made in USA (order separately) 1

50070832 Decal Kit, (items 20-29) 1

20 D813 Decal, Danger Multilingual 1

21 D454 Decal, Warning Crush Hazard 1

22 D614 Decal, Danger Thrown Objects 2

23 D590 Decal, Lube 1

24 D551 Decal, Blade Rotation CCW 1

25 D559 Decal, Genuine BH Parts 1

26 D549 Decal, Danger, Operation 1

27 D547 Decal, Danger 1

28 D546 Decal, Danger Guard Missing 1

29 50031214 Red Reflector 2

30 50080334 Decal, Model, BH416, Reflective (order separately) 1

31 50081249 Bushing, 1.145’’ x 2” x 2.69” 2

32 50081248 Bushing, 1.145” x 1.435” x 2.88” 2

33 44065 Capscrew, 3/4” x 2-3/4” G5 ZP 6

34 44311BH Lockwasher, M8 ZP 4

35 50040387 Removable Front Skid 2

36 50080852 Removable Skid 2

37 8151200 Hex Nut 3/8” CP 16

38 15812 Lockwasher 3/8” CP 16

39 15915BH Flatwasher 3/8” ZP 16

40 3161212 #3 HD Plow BLT 3/8” x 1-1/4” G5 16

41 00786155 Cotter Pin M6 x 65 1

42 50074092 Sight Window, Gearbox 85mm 1


November, 2019

123-1-6


BASE FRAME ASSEMBLY



March, 2019

q

1*

2)2#

2^

2@

2$2*

2&2@

3)

1(2%

1#

o

i

1!1)

1@

3#

1%1$

1^ 3! 3@1&

2(

r

we

y t3$

u

2!

3%3^ 4)

3(3*3&

4!

4@

underneath

123-1-7


BASE FRAME ASSEMBLY




NO. NO. REQ’D.




4 20299 Locknut, 3/4” Flng Gr. G 6





9 7919BH Blade Bolt 2

10 20322 Lockwasher, 1-1/8” CP 2

11 252BH Jamnut, 1-1/8” NF 2

12 7557BH Blade, 7’ Uplift 2


14 70418 Castle Nut M36 x 3 1

15 00786157 Washer, Spring 36mm 1

16 2850005 Klik Pin, 7/16” x 1-3/4” 2

17 50080167 Hitch Pin, 1-1/8” x 7” 2



50070832 Decal Kit, (items 20-29) 1











30 50080335 Decal, Model, BH417 - Reflective (order separately) 1

31 50081249 Bushing, 1.145’’ x 2’’ x 2.69’’ 2

32 50081248 Bushing, 1.145” x 1.435” x 2.88” 2

33 44065 Capscrew, 3/4” x 2-3/4” G5 ZP 6




37 8151200 Hex Nut 3/8” CP 16



40 3161212 #3 HD Plow BLT 3/8” x 1-1/4” G5 16

41 00786155 Cotter Pin, M6 x 65 1


November, 2019

123-1-8


BASE FRAME ASSEMBLY



q

1*

2)2#2^

2@

2$2*

2&2@

3)

1(2%

1#

o

i

1!1)

1@

3#

1%1$

1^ 3! 3@1&

2(

r

we

y t3$

2!

u3%

WELD IN

3*3(4)

4!3&

3^

4@

4#

underneath

123-1-9


BASE FRAME ASSEMBLY




NO. NO. REQ’D.




4 20414 Locknut ,5/8” GR. G CP 6





9 50076705 Blade Bolt 2

10 20322 Lockwasher, 1-1/8” CP 2

11 252BH Jamnut, 1-1/8” NF 2

12 50080466 Blade, 5’ Parallel Uplift, 22.25”, CCW 2


14 50071363 Hex Nut, Slotted Jam 2”-12” 1

15 50071362 Washer, Spring 2” 1

16 2850005 Klik Pin, 7/16” x 1-3/4” 2

17 50080167 Hitch Pin, 7/8” x 7” 2



50070832 Decal Kit, (items 20-29) 1











30 50080336 Decal, Model, BH516 - Reflective (order separately) 1

31 50081249 Bushing, 1.145” x 2” x 2.69” 2

32 50081248 Bushing, 1.145” x 1.435” x 2.88” 2

33 44262BH Capscrew, 3/4” x 2-1/2” G5 ZP 6


35 50076706 Blade Bolt Bushing (Weld In) 2



38 8151200 Hex Nut 3/8” CP 16



41 3161212 #3 HD Plow BLT 3/8” x 1-1/4” G5 16

42 50071364 Cotter Pin, 10mm x 100mm 1


November 2019

123-2-1


GEARBOX ASSEMBLY

540 RPM

MODEL BH416


2&2^

2%2@

2!

2)

2!

i

r

u

1^

t

1(2#2$

e1*

ty

1)o1!

1#2(2*

wq

1%1$

1@o1)

y1&

16T

22T

REF. PARTNO. NO.

DESCRIPTION QTY.

00790752BH Gearbox Assembly 11 —— Housing 12 00790718 Cap, Top 13 00790719 Shaft, Input, 1-3/4”-20 spl 14 00790720 Shaft, Output 15 00790747 Gear Set Kit (22T and 16T Gears) 16 70796 Bearing, Roller 45 x 85 x 20.75mm 27 50025423 Bearing, Tapered Roller 90 x 50 x 24.75mm 18 00777095 Bearing, Tapered Roller 19 00755618 Snap Ring, Din 472 85 x 88.5 x3 mm 2

10 00791066 Shin Kit, Input 211 50068116 Seal, Oil 45 x 85 x 10mm 112 50074092 Sight Window 113 00790732 Dipstick, Oil 114 00790983 Washer, Sealing M16 115 00790985 Plug, Vent M16-1.5 116 00790939 Shin Kit 117 00755632 Shim, 45.3 x 65.3 x 2.5mm 118 2516460 Snap Ring, External 50 x 47 x 3 119 00790937 Nut, Slotted Flanged M30-2.0 120 00790740 Seal, Oil 70 x 110 x 12 121 50025469 Snap Ring, Internal 110mm 222 00790731 Shield, Protective 123 70499 Cotter Pin, M5 x 63 124 00791032 Plug, Socket Hd. 125 00786157 Washer, Spring 36mm 126 70418 Nut, Castle M36 x 3.0 127 00786155 Cotter Pin, M6 x 65mm 128 44311BH Washer, Helical Lock M8 629 00790896 Bolt, Socket Hd. M8-1.25 x 20 6

30

1310

11

1415

16

2

718

1

2024

17

8

4

21

22

23

26

2729

28

9

12

193

1011

7

22

25

3!t

y


GEARBOX ASSEMBLY

540 RPM

MODEL BH417

123-2-2


REF. PARTNO. NO.

DESCRIPTION QTY.

00790705BH Gearbox Assembly 11 ——- Housing 12 00790718 Cap 13 00790719 Shaft, Input 14 00790720 Shaft Output 15 ——- Gear, 22 Tooth 16 ——- Gear, 18 Tooth 17 70796 Bearing, Roller 45 x 85 x 20.75 28 50025423 Bearing, Tapered 90 x 50 x 24.75 19 00777095 Bearing, Roller 1

10 00755618 Snap Ring 85 x 88.5 x 3 211 00791066 Shim Kit, Input 212 50068116 Seal, Oil 45 x 85 x 10 113 50074092 Sight Window 114 00790732 Dipstick 115 00790983 Washer, Seal M16 116 00790985 Plug, Vent M16 117 00790939 Shim Kit, Output 118 00755632 Shim, 45.3 x 65.3 x 2.5 119 2516460 Snap Ring 50 x 47 x 3 120 00790937 Nut, Slotted M30-2 121 00790740 Seal, Oil 70 x 110 x 12 122 50025469 Snap Ring, 110mm 223 00790731 Shield, Protective 124 70499 Cotter Pin, M5 x 63 125 00791032 Plug, Socket Hd. 6mm 126 00790896 Bolt, Socket Hd. M8-1.25 x 20 627 00786157 Washer, Spring 36mm 128 70418 Castle Nut, M36-3 129 00786155 Cotter Pin, M6 x 65 130 44311BH Washer, Lock M8 631 00790737 Gear Set Kit, (22T and 18T) 1

12

2

1613

1

14

15

10

1110

4

9

3

16

17

5

8

5

5

7

6

17

25T

19T

2)

1(1*

2^

2&

2*

2)

2@

2!

2%2#2$

123-2-3


GEARBOX ASSEMBLY

540 RPM

MODEL BH516

REF. PARTNO. NO.

DESCRIPTION QTY.

50071973BH Gearbox Assembly 11 ———— Housing 12 00790887 Cap, Top 13 00790924 Shaft, Input 14 50069790 Shaft, Output 15 00779007 Bearing, Tapered Roller (90x50x24.75) 36 00790889 Seal, Oil 90 x 44 x 10 17 50074090 Sight Window 18 00790928 Bearing, Tapered Roller (125x75x37) 19 50069791 Protector, Seal 1

10 00790931 Ring, Internal Snap 125 x 3 211 00790930 Seal, Oil 101.6 x 125 x 12 112 00790932 Spacer, Small - Input 113 00790933 Spacer, Large - Input 114 13033 Plug, Socket Hd. 3/8”-18 NPT 115 00790939 Kit, Shim 116 00790892 Kit, Input Shim 217 00790944 Gear Kit Set (25T & 19T) 118 70497 Cotter Pin, M5 x 50 119 00790937 Hex Nut, Slotted Flg. M30-2.0 120 00790891 Ring, Internal Snap, 90 x 3 221 00790896 Bolt, Socket Hd., M8 x 1.25 x 20 622 701611C Lockerwasher, M8 623 00790985 Plug, Vent M16-1.5 124 00790983 Washer, Sealing M16 125 4038612 Dipstick, Oil 126 50071362 Washer, Spring 2’’ 127 50071363 Hex Nut, Slotted Jam 2”-12 128 50071364 Cotter Pin, 10MM x 100MM 1


123-3-1


DRIVELINE ASSEMBLY

540 RPM

MODEL BH416


Ref. Part Description Qty.

No. No. Req’d.

15 44154BH Locknut M10 x 1.5 8

16 76080 Spring 8

17 76331 Flanged Yoke 1

18 76082 Bushing 1

19 76083 Lining Ring 2

20 76309 Clutch Support 1

21 76247 Taper Pin Kit 1

22 76085 Inner Plate 1

23 76086 Pressure Plate 1

24 44155BH Capscrew M10 x 1.5 x 85 8

25 50060377 Complete shield 1

26 50056403 Outer Bearing 1

27 50056404 Shield Bolt 6

28 50056405 Inner Bearing 1

29 78608 Danger Decal 1

30 76274 Bush w/Grease fitting 1


No. No. Req’d.

50050571SP Driveline Assy 1

1 ——- Outer Half w/Shield 1

2 ——- Inner Half w/Shield 1

3 76803 Complete Collar Yoke 1

4 50017480 Ball Collar Kit 1

5 76998 Cross Journal Set 2

6 76335 Grease Fitting 2

7 78134 Outer Yoke 1

8 67108 Roll Pin For Outer Yoke 1

9 50060375 Outer Tube 1


11 50060376 Inner Tube 1

12 67085 Roll Pin Inner Tube 1

13 67086 Inner Yoke 1

14 76999 Slip Clutch Assy (items 15-24) 1

123-3-2


DRIVELINE ASSEMBLY

540 RPM

MODEL BH417, BH516


No. No. Req’d.

15 44154BH Locknut M10 x 1.5 8

16 76080 Spring 8

17 76331 Flanged Yoke 1

18 76082 Bushing 1

19 76083 Lining Ring 4

20 76458 Clutch Support 1

21 76247 Taper Pin Kit 1

22 76085 Inner Plate 2

23 76197 Intermediate Plate 1

24 76086 Pressure Plate 1

25 44159BH Capscrew, M10 x 1.5 x 100 8

26 50060377 Complete Shield 1

27 50056403 Outer Bearing 1

28 50056404 Shield Bolt 6

29 50056405 Inner Bearing 1


31 76274 Bush w/Grease fitting 1


No. No. Req’d.

50050572 Driveline Assy 1

1 ——- Outer Half w/Shield 1

2 50060380 Inner Half w/Shield 1

3 76803 Complete Collar Yoke 1

4 50017480 Ball Collar Kit 1

5 76998 Cross Journal Set 2

6 76335 Grease Fitting 2

7 78134 Outer Yoke 1

8 67108 Roll Pin For Outer Yoke 1

9 50060375 Outer Tube 1


11 50060376 Inner Tube 1

12 67085 Roll Pin Inner Tube 1

13 67086 Inner Yoke 1

14 76490 Slip Clutch Assy (items 15-25) 1



123-4-1


BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL

REF. PARTNO. NO. QTY. DESCRIPTION

1 53340BH 1 Adaptor 9/16” JIC to 3/4” SAE2 24-6-434 1 Adaptor 9/16” JIC to 1/2” NPT3 14-40-98 1 90° Elbow 3/4” ORB to 9/16” JIC4 86500 1 Breather Plug5 62427 1 Hydraulic Hose 144”6 50017492 1 Hydraulic Cylinder Assembly

(2” Bore x 8” Stroke x 1.125 Rod)(3/4” ORB Ports)

50017620 1 Seal Kit7 63451 1 Stop Collar Kit

64830 HYDRAULIC BUNDLEModel BH417

1

23

7

4

5

6

1817SP RATCHET ASSEMBLYModel BH417

REF. PARTNO. NO. QTY. DESCRIPTION

1817SP 1 Ratchet Assembly1 50028265 2 Pin2 50028264 4 Clip Pin3 ----- 1 Handle4 15474 1 Cotter Pin5 12117BH 1 Caution Decal (not shown) 1

2

2

4

32

2

1



November, 2019

123-4-2


HITCH ASSEMBLY

All Models BH416, BH417 & BH516


o2@u

1&

1$u2@1#

w

q

1^1%

i

t

y

1!

o

o2@u

er

2)

1*1(2!

1)

1@

o2@

u1&

2!1(1*2)


HITCH ASSEMBLY

All Models BH416, BH417 & BH516


NO. NO. REQ’D.

1 50080403 LH A-Frame (BH416, BH417) 1

50080468 LH A-Frame (BH516) 1

2 50080404 RH A-Frame (BH416, BH417) 1

50080467 RH A-Frame (BH516) 1

3 50080412 RH Toggle 1

4 50080411 LH Toggle 1

5 50080408 LH Strut (BH416, BH516) 1

50080490 LH Strut (BH417) 1

6 50080409 RH Strut (BH416, BH516) 1

50080491 RH Strut (BH417) 1

7 50050392 Spacer, Bushing 4

8 19037 Capscrew, 3/4” x 5-1/2” G5 ZP 1

9 20638 Locknut, 3/4” CP 5

10 50050393 Wear Bushing, (1” x .76” x .75”L) 2

11 1162424 Capscrew, 3/4” x 2-1/2” G5 ZP 2

12 82000 Spacer Mast 1

13 19061 Capscrew, 1” x 5” G5 ZP 1

14 6404018 Bushing, (1.03” x 1.25” x 2.06”) 1

15 15821 Lockwasher, 1” CP 1

16 19502 Hex Nut, 1” CP 1

17 20510 Capscrew, 3/4” x 2-1/4” G5 2

18 69528 Bushing, Mast Link 2

19 15908BH Flatwasher, 1” ZP 2

20 ——- Capscrew, 1” x 2-1/2” G5 2

21 9163200 Locknut, 1” GR C CP 2

22 15921 Flatwasher, 3/4” SAE ZP 4

123-4-3


June, 2019

123-4-4-


SINGLE TAILWHEEL and RELATED PARTS

Models BH416, BH516


31 30 32 30 33

26 27

28

29 34

33 3032 30 31

23

2425

22

35

21

18

2019

151011 8

17 131216

9 7653214

4

1



NO. NO. REQ’D.

1 50073432 Hub & Spindle Assembly, Short 1

(includes items 2-7, 9, 12-14, 17)

2 00779455 Retainer, Hub Cap 1

3 00756492 Cap, Dust 1

4 00026200 Pin, Cotter 5/32” x 1-1/2” 1

5 00756490 Nut, Slotted, Thin 1” 1

6 00756493 Washer, Flat-Heat Treated 1

7 0371242102 Bearing Cone 1-1/4” Bore 1

8 00756576 Bearing Cup 1

9 00779456 Assy, Wheel Hub w/Cups & Studs 1

(includes items 8, 10, 11, 16)

10 00003500 Fitting, Grease 1/8 MP Straight 1

11 00756577 Cup, Bearing N/S Wheel Hub 1


13 00778108 Seal, Protector, (Kit Of 3 Pieces) 1

14 00750614 Nut, 1/2-20 NF, 90 Degree Cone 5

15 294SP Wheel Assy, w/Segmented Tire 1

16 13198 Bolt, Hub 1/2-20 NF x 1-7/8” 5

17 50073436 Spindle, Short 1

18 20779 Capscrew 1/2” x 3-1/2” G5 1

19 15806 Lockwasher, 1/2” CP 1

20 15554 Locknut, 1/2” CP 1

21 50080788 Caster Weldment 1

22 449BH Fitting, Grease 1/4” 1

23 50080405 Tailwheel Weldment 1

24 19427BH Roll Pin, 1/2” x 2-1/4” 1

25 12262 Caster Lock Collar Assy 1

26 20947 Capscrew, 5/8” x 2” G5 ZP 2


28 50080406 Height Arm 1



31 44429 Capscrew, 3/4” x 5-1/2” G8 ZP 2

32 50080413 Bushing (1.00” x .76” x 4.06”) 2

33 20638 Locknut, 3/4” CP 2

34 15563 Hex Nut, 5/8” CP 2

35 69889 Caster Thrust Weldment 1

123-4-5


SINGLE TAILWHEEL and RELATED PARTS

Models BH416, BH516


DUAL TAILWHEEL and RELATED PARTS

MODEL BH417

123-4-6


35

36 37 40 39

44

433733

34

41 42

32

2029

25

38

3031

2920

28 272622

2324

18

15

142345

67

11

9

10 8

1213

17

16

2120 19

1


123-4-7


DUAL TAILWHEEL and RELATED PARTS

MODEL BH417


NO. NO. REQ’D.

1 50073432 Hub & Spindle Assembly, Short 1

(includes items 2-7, 9, 12-14, 16)

2 00779455 Retainer, Hub Cap 1

3 00756492 Cap, Dust 1

4 00026200 Pin, Cotter 5/32” x 1-1/2” 1

5 00756490 Nut, Slotted, Thin 1” 1

6 00756493 Washer, Flat-Heat Treated 1


8 00756576 Bearing Cup 1

9 00779456 Assy, Wheel Hub w/Cups & Studs 1

(includes items 8, 10, 11, 17)

10 00003500 Fitting, Grease 1/8 MP Straight 1

11 00756577 Cup, Bearing N/S Wheel Hub 1


13 00778108 Seal, Protector, (Kit Of 3 Pieces) 1

14 00750614 Nut, 1/2-20 NF, 90 Degree Cone 5

15 294SP Wheel Assy, w/Segmented Tire 1

16 50073436 Spindle, Short 1

17 13198 Bolt, Hub 1/2-20 NF x 1-7/8” 5

18 50080788 Caster Weldment 1

19 20779 Hex Head Capscrew, 1/2” x 3-1/2” G5 1


21 15554 Locknut, 1/2” CP 1

22 19427BH Roll Pin, 1/2” x 2-1/4” 1

23 12262 Caster Lock Collar Assy 1

24 449BH Fitting, Grease 1/4” 1

25 50080808 Axle Arm Weldment 1

26 91042 Sandwich Mount 1

27 88280 Spacer 1

28 44030BH Capscrew, 1/2” x 5 G5 ZP 1

29 8151600 Hex Nut 1/2” CP 2

30 88279 Lift Arm Mount Weldment 1

31 20272BH Hex Head Capscrew, 7/8” x 5-1/2” G5 ZP 1

32 88272 Pivot Bushing 1

33 44149BH Locknut 7/8” GRC CP 1


35 50080734 Axle Weldment 1

36 9163200 Locknut 1” GRC CP 1

37 20376 Flatwasher 1” SAE 1-1/16” ID 2

38 69889 Caster Thrust Washer 1

39 85849 Plate, Bushing 1

40 90108BH Bushing, Strongback 1

41 19517 Hex Nut, 3/4” CP 4

42 146 Lockwasher, 3/4” ZP 4

43 20100 Capscrew, 1” x 9-1/2” ZP 1

44 44429 Capscrew, 3/4” x 5-1/2” G8 ZP 4

• SELMA, AL 3670WWW.BUSHHOG.COM

BH400/ BH500 SERIES · 2020-01-20 · 31 50081249 Bushing, 1.145’’ x 2” x 2.69” 2 32...

Documents

Transcript of BH400/ BH500 SERIES · 2020-01-20 · 31 50081249 Bushing, 1.145’’ x 2” x 2.69” 2 32...