BGI- UniLife Roboz Tec & Machines (India)
-
Upload
ajay-thusoo -
Category
Services
-
view
91 -
download
3
Transcript of BGI- UniLife Roboz Tec & Machines (India)
UniLife Roboz Tec & Machines (India)Automation Experts for Plastic Industries
BGI- UNILIFE ROBOZ TEC & MACHINES (INDIA) is a Business Associate Partner of HUBEI YIPENGZHAN PRECISION
MACHINERY CO LTD and was established in 2015 with its head office in Pune. Our main objective is to provide the Indian
market with the entire range of top of the line HUBEI YIPENGZHAN products coupled with value added services thereby
delivering the least cost of ownership to our customers.
ABOUT BGI- UNILIFE ROBOZ TEC & MACHINES (INDIA)
Automation Products: 40- 4000T IMM
S- Series
Radial Arm Robot
One-Armed Sectional Type One-Armed Bendy Type Vertical Machine
Main Explanation: S-Series Radial -Arm robot series is mainly applied in pouting gate take -out of 40-400T Horizontal
injection molding machine, there are two forms of arm of single stage & double stage, the whole machine spinning out and in,
pulling out and travelling up and down are pneumatic driven, full- featured machine is equipped with vacuum generator and
standard ceiling fixture, and single-function machine has no such device.
IMM Size: 40-400T
Main Specifications:
Model (Ton)
Applied
to IMM
Travel (mm) Angle
(Degrees)
Max Load
(Including
Ceiling
Fixture)
Time (sec) Driven
Way
Working
Pressure
(kgf/cm)
Air
Consumpt
ion
(nl/cycle)
Power
Supply
Power
Consumption
(kva)
NW (kg)
Up &
Down
Pull Up Up &
Down
Pull
Up
Take Out Empty
Loop
SS I (II)
650V50-180 650
120:200 50-90 90 2
0.9(0.7) 4.2(4.0)
Air
Pressure5~7
14.3(15.5)
AC220
+-10V
50/60Hz
0.2
33(49)
SS I (II)
750V100-250 750
1.0(0.9) 4.6(4.5) 16.4(17.1) 34(50)
0.7 4 16.2 60PS II 650V 65-200 650
Model A B C D E F G H I J
SS I (II) 650V 1450(1055) 1180(889)508 200(175) 80(135) 420(430) 560 255 413 120
SS I (II) 750V 1550(1105) 1280(939)
A- Series
Light 1-Axis Horizontal Robot
IMM Size: 50-200T
Main Explanation: A-Series Cross-Travelling robot series is mainly applied to take out the finished product of 50-200T
Horizontal injection molding machine, It uses single-cut arm, can add jib head for take-out of three-mould material, cross-travelling
has two driven ways of inverter motor (main arm up & down is started by AC Servo motor) and AC Servo the motor, pulling out and
travelling up and down are driven by air pressure, its stroke adjustment and position adjustment have two ways of manual
adjustment (Standard) and electric adjustment (optional type), and is equipped with standard holding fixture.
Model (Ton)
Applied to
IMM
Travel (mm) Side
Posture
Angle
(Deg)
Max Load
(Including
Ceiling
Fixture)
Time (sec) Driven
Way
Working
Pressure
(kgf/cm)
Air
Consumpti
on
(nl/cycle
Power
Supply
Power
Consum
ption
(kva)
NW (kg)
Up &
Down
Pull Out Cross
travelling
Take
Out
Empty
Loop
AD I-
650+S50-180 650
170:120
1150
90 2.5
1.6 8X- AC
Servo
Motor
Y,Z- Air
Pressure
5~7
19 AC220
+-10V
50/60Hz
0.9
170
AD I-
750+S100-250 750 1350 1.6 9 20 180
Main Specifications:
Model A B C D E F G H I J K L M N O P
AD I-650+S 1500 1075
330
1870 1200 1150
815 490 350 35
500
115 240 210 250 410
AD I-750+S 1600 1175 2070 1400 1350 700
For More Details Please Visit Our Website: www.yipengzhan.com
Automation Products: 40- 4000T IMMA- Series
Medium 1-Axis Cross-Travelling Robot
Main Explanation: A-Series Cross-
Travelling robot series is mainly applied to take-out the
finished product of 150-350T Horizontal injection
molding machine, It uses double-cut arm, can add jib
head to take-out of three-mould material, cross-
travelling has two driven ways of inverter motor (main
arm up & down is started by AC Servo motor) and AC
Servo the motor, pulling out and travelling up and down
are driven by pneumatic driven, its stroke adjustment
and position adjustment have two ways of manual
adjustment (Standard) and electric adjustment (optional
type), and is equipped with standard holding fixture.
IMM Size: 150-350T
Main Specifications:
Model
(Ton)
Applied to
IMM
Travel (mm)Side
Posture
Angle
(Deg)
Max Load
(Including
Ceiling
Fixture)
Time (sec)Driven
Way
Working
Pressure
(kgf/cm)
Air
Consumptio
n (nl/cycle
Power
Supply
Power
Consumption
(kva)
NW (kg)Up &
DownPull Out
Cross
travelling
Take
Out
Empty
Loop
AD II-
750+S50-220 750
170:120
1350
90 3
1.8 9X- AC
Servo
Motor
Y,Z- Air
Pressur
e
5~7
20
AC220
+-10V
50/60Hz
1.1-1.3
190
AD II-
850+S150-280 850 1350 1.9 9.5 21 200
AD II-
950+S200-350 950 1550 2 10 23 230
Model A B C D E F G H I J K L M N O P
AD II-
750+S1200 885
330
2070 1400 1350
815 490 350 165
750
165 200 170 210 410AD II-
850+S1260 935
AD II-
950+S1320 985 2270 1530 1550
Hubei Yipengzhan Precision Machinery Co.,Ltd is well known brand & Their products are widely used in injection molding machines,
CNC machining automation, specializing in automobile production automation, as well as tailored to customers automate production
chain. Products exported to many countries the United States, Taiwan, Indonesia, Canada; the company has passed ISO9000 system.
Some Highlights:
Robot is available in all the ranges—with inverter motor & with servo motor.
Entire structure & spares are made in house in factory.
All the Pneumatic cylinders used are from Kinetrol (United Kingdom).
AC Servo motor used is from Panasonic- Japan.
Magnetic valve: Jinqi (Taiwan).
Linear guide rail: THK (Japan).
The company is only in Robotics with a strong in house R&D deptt.
The company has been selling Robots from Last 10 years.
The company has a complete range of Robots, Sprue Picker, full servo, to In Mould Labeling.
The company has the Robots right from 40Ton machine to 4000Ton machine.
For More Details Please Visit Our Website: www.yipengzhan.com
Main Specifications:
Model
(Ton)
Applied to
IMM
Travel (mm) Side
Posture
Angle
(Deg)
Max Load
(Including
Ceiling
Fixture)
Time (sec)
Driven
Way
Working
Pressure
(kgf/cm)
Air
Consumptio
n (nl/cycle
Power
Supply
Power
Consumptio
n (kva)
NW (kg)Up &
DownPull Out
Cross
travelling
Take
Out
Empty
Loop
AD II-1500+S 650-1000 1500
600:200
2200
90
7
3.5 18
X- AC
Servo
Motor
Y,Z- Air
Pressure
5~7
60
AC220
+-10V
50/60Hz
1.8
820
AD II-1700+S 800-1250 1700 2600 3.7 20 70 890
AD II-2000+S 1200-1600 2000 2900 3.9 22 90 1050
AD II-2500+S 1500-2200 2500 3700 10 4.1 24 1152.5
1250
AD II-3000+S 1800-3200 3000 4200 30-Oct 4.3 28 135 1450
Model A B C D E F G H I J K L M N O
AD II-1500+S 1980 3270
450
22002200
\ \
800 530 3001400
270 250 200 280AD II-1700+S 2100 3670 2600
AD II-2000+S 2280 3970 2900 2600 1800
AD II-2500+S 2700 4870500
3700 3000930 650 320
2150350 140 100 150
AD II-3000+S 3000 5370 4200 3200 2250
Main Explanation: A-Series Large Cross-Travelling robot series is
mainly applied to take-out the finished product of 650-4000T Horizontal
injection molding machine, It uses double-cut arm, can add jib head to take-out
of three-mould material, cross-travelling has two driven ways of inverter motor
(main arm up & down is started by AC Servo motor) and AC Servo the motor,
pulling out and travelling up and down are driven by pneumatic driven, its
stroke adjustment and position adjustment have two ways of manual
adjustment (Standard) and electric adjustment (optional type), and it has
standard Configuration.
Large 1-Axis Cross-Travelling Robot
A- Series Automation Products: 40- 4000T IMMAutomation Products: 40- 4000T IMME- Series
IMM Size: 650-4000T
E- Series Medium Full Servo Horizontal Cross-Travelling Robot IMM Size: 50-700T
Main Explanation: E-Series Medium Full Servo Cross-
Travelling robot series is mainly applied to take-out the finished product of
50-700T Horizontal injection molding machine, It uses single-cut arm, three-
axis of X, Y Z, has AC Servo motor driven mode, it is equipped with Japan
THK low noise sliding track, quiet and smooth, and has standard
Configuration.
Main Specifications:
Model
(Ton)
Applied
to IMM
Travel (mm) Side
Posture
Angle
(Deg)
Max Load
(Including
Ceiling
Fixture)
Time (sec)
Driven
Way
Working
Pressure
(kgf/cm)
Air
Consumptio
n (nl/cycle
Power
Supply
Power
Consumpti
on (kva)
NW (kg)Up &
DownPull Out
Cross
travelling
Take
Out
Empty
Loop
EDII-650+S3/S5 50-180 650
165-650
1150
90
3
1.3 5
X,Y,Z -
AC
Servo
Motor
5~7 8
AC220
+-10V
50/60Hz
4.2
190
220EDII-750+S3/S5 150-220 7501350
1.4 6
EDII-850+S3/S5 150-280 850 1.5 6.5 245
EDII-1000+S3/S5 250-450 1000
220-1050 1750 5
2.57.5 280
EDII-1100+S3/S5 250-550 1100 8 310
EDII-1200+S3/S5 350-600 1200 2.6 8.5 420
EDII-1300+S3/S5 400-700 1300 2.7 9 360
Model A B C D E F G H I J K L M N O
EDII-650+S3/S5 1250 1870
400
1150 1340
\
165 490 350 \
650
\
100 70 110EDII-750+S3/S5 1310
2070 1350 1440750
EDII-850+S3/S5 1370 750
140 110 230
EDII-1000+S3/S5 1640
2880 850 1750 1760 150 630 420 200 1050EDII-1100+S3/S5 1580
EDII-1200+S3/S5 1700
EDII-1300+S3/S5 1760
For More Details Please Visit Our Website: www.yipengzhan.com
Main Specifications:
Automation Products: 40- 4000T IMME- Series
Main Explanation: E-Series Large Full Servo Horizontal
Cross-Travelling robot series is mainly applied to take-out the finished
product of 650-4000T Horizontal injection molding machine, It uses
single-cut arm, three-axis of X, Y Z, has AC Servo motor driven mode,
it is equipped with Japan THK low noise sliding track, quiet and
smooth, and has standard Configuration. Based ob actual customer
usage, side posture group can add servo axis A and B or one of them,
capable of flexible multi-degree freed motion and realize complex take -
out methods and optimized take-out paths.
Large Full Servo Horizontal Cross-Travelling Robot IMM Size: 650-4000T
Model
(Ton)
Applied to
IMM
Travel (mm) Side
Posture
Angle
(Deg)
Max Load
(Including
Ceiling
Fixture)
Time (sec)Driven
Way
Working
Pressure
(kgf/cm)
Air
Consumptio
n (nl/cycle
Power
Supply
Power
Consumpti
on (kva)
NW
(kg)Up &
DownPull Out
Cross
travellingTake
Out
Empty
Loop
EDII-1500+S3/S5 650-1000 1500200-1400
2200
90
7 3
15
X,Y,Z -
AC
Servo
Motor
5~7
20AC220
+-10V
50/60Hz
5
820
EDII-1700+S3/S5 800-1250 1700 2600 16 890
EDII-2000+S3/S5 1200-1600 2000 200-1800 2900 18 1200
EDII-2500+S3/S5 1500-2200 2500 200-2150 3700 103.5
2022 6.5
1450
EDII-3000+S3/S5 1800-3200 3000 200-2250 4200 10~30 22 1850
Model A B C D E F G H I J K L M N
EDII-1500+S3/S5 2180 3550
800
22002400
\ 200
840 530
\
1400
\ 180 100
EDII-1700+S3/S5 2300 3950 2600
EDII-2000+S3/S5 2480 4250 2900 2700 1800
EDII-2500+S3/S5 2800 5200950
3700 3200650 650
2150
EDII-3000+S3/S5 3100 5700 4200 3700 2250
ET- Series
Large Full Open Servo Horizontal Cross-Travelling Robot
IMM Size: 650-4000T Model ETII-650+S3/S5 ETII-4000+S3/S5
One, Two, Three, Five Axis High Speed Servo Motor Driven Robots
Conveyor Belt Whole machine's frame body is
made of high strength aluminum
alloy extrusion profiles, durable
without deformation.
Two ends heights are adjustable,
easy to operate, it is ok to turn the
hand wheel.
To move, can be folded without
hand wheel, not occupying the
space.
Belt running speed and direction
can be adjusted and switched at
any time, with rapid response.
Equipped with standard
connectors, easy to connect with
other devices.
Main Specifications:Model TAD: TBD
Belt Width Series (mm) 200/30/400/500/600
Conveyor Length Series (mm)1500/2000/2500/3000/3500/4000/4500/5000/5500
/6000
Plane Length (mm)300(W≤ 300; L≤200)/500(W≥400;
L≤2500)/700(W≥600; L≤300
Low-End Height (mm) 700-1000
High-End Height (mm) 1000-1600
Maximum Load (Kg) 25
Leather Belt PVC, 2mm; -10C' - 80 C'.
Conveyor Speed m/min Max: 15
Power Supply Single Phase AC220V+-10V 50/60Hz
Power Consumption (KVA) 0.2
Description Of Model and Procedures
Structure: TAD: Single full inclined double-foot: TBD: Flat inclined
double-foot.
Width Series: 02:200 wide; 04:400 wide; 05-500 wide; 06:600 wide.
Length Series: 015:1.5 m long; 020:2 m long; 025:2.5 m long;
030:3 m long; 040:4 m long.
Assembly LineFor More Details Please Visit Our Website: www.yipengzhan.com
Automation Products: 40- 4000T IMMController
8-inch color touch screen hand
controller, more simple, convenient,
and user-friendly.
Open teaching way can easily
realize embedding, stacking and other
process requirements, and has
assisting action with auxiliary
equipment.
3-axis linkage function can plan a
variety of complex take-out paths.
Position setting can be accurately
set with knob pulse spinner.
INTERNET INTERFACE Along range LAN network connection is provided for program download and saving which is more convenient and faster.
USB INTERFACE USB device for ease of program storage, even during normal operation, which is faster and more convenient.
Extendable 8 ShaftColor screen, single-sheet multi-line display, making it easy for
users to set parameters and signal monitoring.
32-bit double-CPU control, fast action response, smoother page
switching.
Open program teaching mode, easy to learn, provide common
fixed programs, users can also self teach a variety of complex
mould process.
AC servo direction can have multi-point placement, up to 99 sets.
Fixtures Accessories
High Quality Fixture AccessoriesScenarios
BGI- UniLife Roboz Tec & Machines (India) has built and will continue to develop our customer service network
to ensure that our products constantly operate in top condition and contribute to high productivity.
“One stop solutions for all needs for Plastics Automation Products &Services”
UniLife Roboz Tec & Machines (India)(Automation Experts for Plastic Industries)
Add: 301/A, Gulmohar, Deshmukhwadi, NDA Rd, Shivane, Pune- 411023
Ph: +91-9763311436, 8698006447, Skype: unilifetec
Email- [email protected], [email protected]
Head Office:
…The Giant Ocean The Seeds Of Life…
Sales & Service:
Hubei Yipengzhan Precision Machinery Co.,Ltd.
Add: 68, Wenchang Road, Xiaotian Industrial area, Xiaogan City, Hubei, China..
Ph: +86-0755-81736041
Email: [email protected]
Factory In China:
PUNE PANVEL MUMBAI KOLHAPUR KOLKATA GURGAON JAMMU & KASHMIR…For More Details Please Visit Our Website: www.yipengzhan.com