7/31/2019 Bf Feeder

1/2

Vibroflow feeders are designed

and built to satisfy the needs ofmany industries. The feeders

can be installed under silos,

hoppers or any other means of

bulk materials storage. They

can cope with heavy head loads

or abusive batch feeds from

cranes or front end loaders.

Typical operations for feeders

include spreading materialevently across the trough or

feeding material between points.

Direct driven feeders are set in

motion by two counter rotation,

out-of-balance vibratory motors.

The feed rate on the feeders can

be varied by changing the balance

settings on the vibratory motors

or, if included, utilizing variablespeed drives which can control the

flow rate from zero to maximum.

Direct drive units are simple,

rugged machines which are

practical due to their low cost

and simplicity of maintenance.

As opposed to sub-resonant

designs which are more complex

but offer greater energyefficiency and longer lifespans.

Typical functions include feeding

mineral sands, ores, coal, shredded

metals, recycling materials, wood

chips, rocks, gravel and sand.

Vibratory FeedersDirect Drive

Ph + 61 3 8711 8518

Fax +61 3 8711 8853

Email info@vibroflow.com.au

Web www.vibroflow.com.au

7/31/2019 Bf Feeder

2/2

Application Withdrawal of bulk materials from a bin or hopper

or from other storage media at a constant mat depth or

variable rate.

Spreading material evenly across a discharge

Storing and batch feeding bulk solids

Transferring low to heavy density materials

Construction Construction material:

- carbon steel

- stainless steel

- aluminum

- other wear resistant steels

Drive configuration:

- bottom drive

- rear drive

- side dive

- over-head drive

Trough shape:

- rectangular

- flared

- tubular

- semi-circular

- multi trough with dividers

Features Liners:

- abrasion resistant steel

- stainless steel

- polyurethane

- rubber

- ceramics

- alumina tiles

Dust tight covers; bolted and/or hinged with inspection

ports if required

Installation:

- horizontal

- inclined or declined slope

- fixed or adjustable

Support: floor mounted or suspended

Vibration isolation mountings:

- steel coil springs

- rubber mounts

- oscillating mounting

Benefits Simplicity in operation.

Low maintenance requirements.

Low noise.

Ph + 61 3 8711 8518

Fax +61 3 8711 8853

Email info@vibroflow.com.au

Web www.vibroflow.com.au

Range

Width Up to 7000mm

*Length 300mm - 3200mm

Range

Motor Size Up to 20kw

*Feed Rate Up to 1500 T / Hr

Technical Data

For further information or to request a quote visit our website www.vibroflow.com.au and either fill in a quote form or email us

directly. Alternatively, fill out your general requirements below and fax this page to us on + 61 3 8711 8853.

Return Fax Number Equipment Location

Material Type Capacity

Material Density Application

* If lengths of greater than 3200mm or feed rates of greater than 1500 T / Hr are required we recommend sub-resonant feeders. Please find brochure for more information