BF-10D - PMTech · CCD line scanning camera. Through telecentric lens, it is able to inspect...
2
BF-10D Full color image Multi-angle color image Inspection Program provides appropriate images Flexible High Resolution Imaging System High Throughput Programming Main Features Compact, Long-life Design BF-10D is a dual lane automated optical inspection system with Saki’s original alternate scanning system which provides high throughput. Additionally, programming has been greatly improved, and brings enhanced productivity. Throughput is now further enhanced by optimized automatic lighting calibration function. Scan time is 30% faster. Operating system is 64 bit with multicore processing, enable faster throughput and at the same time, compatible with the conventional systems. Tact time is about 16 seconds for two M-size (250mm x 330mm) boards and about 12 seconds for two boards of size 150mm x 330mm. Functions useful for inline application have been renewed, including functions such as search pad, search component which helps to enhance the contrast of image affected by application of equivalent parts and oxidation of electrode. By means of the above improvement, changeover time and first pass yield could be improved. The system equips the camera-drived line scan system and dual lane conveyor system in a compact design. Highly rigidity frame and low-vibration high-speed camera unit makes it possible to provide longer service life with high repeatability. This dual lane conveyer system is designed to adapt with various placement machines and reflow ovens. It will increase productivity space efficiency and support high speed production. The system is equipped with a newly developed high-speed multi CCD line scanning camera. Through telecentric lens, it is able to inspect densely mounted 01005(0402) chips. With the further optimization of the LED lighting, a remarkable S/N ratio has been archived through vastly improved color rendering properties. Dual Lane High Resolution and High Speed Automated Optical Inspection System BF-10D
Transcript of BF-10D - PMTech · CCD line scanning camera. Through telecentric lens, it is able to inspect...
BF-10D
Full color image Multi-angle color image
Inspection Program provides appropriate images
Multi-angle color image
Flexible
High Resolution Imaging System
High Throughput
Programming
Main Features Compact, Long-life DesignBF-10D is a dual lane automated optical inspection system with Saki’s original alternate scanning system which provides high throughput. Additionally, programming has been greatly improved, and brings enhanced productivity.
Throughput is now further enhanced by optimized automatic lighting calibration function. Scan time is 30% faster. Operating system is 64 bit with multicore processing, enable faster throughput and at the same time, compatible with the conventional systems. Tact time is about 16 seconds for two M-size (250mm x 330mm) boards and about 12 seconds for two boards of size 150mm x 330mm.
Functions useful for inline application have been renewed, including functions such as search pad, search component which helps to enhance the contrast of image affected by application of equivalent parts and oxidation of electrode. By means of the above improvement, changeover time and fi rst pass yield could be improved.
The system equips the camera-drived line scan system and dual lane conveyor system in a compact design. Highly rigidity frame and low-vibration high-speed camera unit makes it possible to provide longer service life with high repeatability.
This dual lane conveyer system is designed to adapt with various placement machines and refl ow ovens. It will increase productivity space effi ciency and support high speed production.
The system is equipped with a newly developed high-speed multi CCD line scanning camera. Through telecentric lens, it is able to inspect densely mounted 01005(0402) chips. With the further optimization of the LED lighting, a remarkable S/N ratio has been archived through vastly improved color rendering properties.
Dual Lane High Resolution and High SpeedAutomated Optical Inspection System
BF-10D
BF-10D
E-mail:[email protected]
Saki CorporationSaki CorporationHeadquartersOgawa Building, 4-14-7, Nakanobu,Shinagawa-ku, Tokyo, Japan, 142-0053TEL：+81-3-5788-6280 FAX：+81-3-5788-6295
Global Networkhttp://www.sakicorp.com
Dimensions Sysmtem Specifi cations
© 2012 Saki Corporation. All Rights Reserved.Specifi cations contained in this fl yer are subject to change without notice.
This fl yer was made out in December 2012.SJ311DCF1-01.2E
Front View
Side View
Installation Specifi cations
Model BF-10D
Resolution 10μm
Board Size Single Lane 50×60 - 460×330mm, 2×2.4 - 18×13in.Dual Lane 50×60 - 250×330mm, 2×2.4 - 10×13in.
Board Thickness 0.6 - 3.2mm, 24 - 126mils
Board Warp +/-2mm, 80mils
PCB Clearance Top: 40mm, 1.57in. Bottom: 40mm, 1.57in.
Rotated Component Support Available for 0 - 359°rotation (unit of 1°)
InspectionCategories
Presence/Absence, Misalignment, Tombstone, Reverse, Polarity, Bridge, Foreign material, Absence of solder, Insuffi cient solder, Lifted lead, Lifted Chip, and Fillet defect. Each defect name can be changed freely by system function.
Tact Time*1 *2 Single Lane Approx. 10sec (250x330mm 1 PCB)Dual Lane Approx. 16sec (250x330mm 2 PCB)
Image Scanning Time*1 Approx. 5.5sec. (250x330mm)
Camera (Image Processing) Line color CCD camera
Lighting LED lighting system
Transfer Conveyor Method Flat belt transfer
Transfer Conveyor Height 900+/-20mm, 36+/-0.8in
Transfer Conveyor Width Adjustment Automatic
Operating System Windows 7 English Version
Optional System BF-Editor / BF-RP1 / BF-Monitor / BF-View
Optional 2D Barcode Recognition, Journal Printer
Electric PowerRequirement
Single Phase ～100 - 120V / 200 - 240V +/-10%,50/60Hz, 800VA
Air Requirement 0.5MPa, 5L/min (ANR), 73PSI, 0.18CFM
UsageEnvironment
15°C(59F) - 30°C(86F) / 15 - 80% RH(Non-condensing)
Dimensions*3 W x D x H 850 × 1360 × 1380mm, 33.5 × 53.5 × 54.3in.
Weight Approx. 450kg, 922.3lbs
*1 If PCB size is smaller than 250x330mm, Image scannig time will be shorter than this values.*2 Including Image Scanning Time.
*3 Monitor and keyboard arm is not included.
1380
mm
900
mm
2000
mm
(165
5 m
m)
340 mm
1360 mm850 mm
(350 mm)
1380
mm
900
mm
2000
mm
(165
5 m
m)
340 mm
1360 mm850 mm
(350 mm)
![For signal line MMZ series - tdk.co.jp · EMC Components July 2013 Chip Beads For signal line MMZ series MMZ0402 0402[01005 inch]* MMZ0603 0603[0201 inch] MMZ1005 …](https://static.fdocuments.us/doc/165x107/5b574d187f8b9ac5358dedd0/for-signal-line-mmz-series-tdkcojp-emc-components-july-2013-chip-beads-for.jpg)
![Commercial Grade, General (Up to 50V) C series€¦ · Type: C0402 [01005 inch] zC0603 [0201 inch] zC1005 [0402 inch] zC1608 [0603 inch] zC2012 [0805 inch] z C3216 [1206 inch] zC3225](https://static.fdocuments.us/doc/165x107/5f2a1ad70d2a3612680cda61/commercial-grade-general-up-to-50v-c-series-type-c0402-01005-inch-zc0603-0201.jpg)
