Beyond_12-08_Lo[1]
Transcript of Beyond_12-08_Lo[1]
-
7/29/2019 Beyond_12-08_Lo[1]
1/16
Anti-Pinch
Door System
BEYOND
-
7/29/2019 Beyond_12-08_Lo[1]
2/16
DORMABEYOND
ContentsDORMA BEYONDDORMA BEYOND
2
CONTENTS
BEYOND
3 Pinch free and easy action
BEYOND swing door system
4 Short pivot rod
5 Continuous pivot rod
6 Swing door fittings
6 Glass preparation
BEYOND sliding door system
8 Sliding door solutions
10 Glass preparation
13 Accessories
-
7/29/2019 Beyond_12-08_Lo[1]
3/16
Anti-Pinch Door SystemDORMA BEYOND
The unique DORMA BEYOND
system for glass doors is safe,functional, and attractive.
Characterized by its systematic
design and clear styling lines,
DORMA BEYOND enables you
to build frameless swing or
sliding glass doors into tem-
pered glass assemblies and
wall openings. Whether your
application is residential or
commercial, modern or tradi-
tional, this new system is the
elegant, technically perfect
solution.
The patented DORMA BEYOND
swing door system locates its
pivot point centrally in the
glass axis and close to the
glass edge, ensuring safety
and security. This feature
prevents the risk of trapped
fingers often found at the
pivoting side of glass swing
doors.
DORMA BEYOND fittings
give perfect balance to
sliding glass doors. The roller
location guarantees that the
two parallel-running rollers
are loaded equally, thus
ensuring that the doorscenter of gravity is always
in balance. The articulated
mounting also ensures
optimized door movement
and nearly silent operation.
The round profile fitting,
designed to harmonize with
the pivot rod, supports the
roller carrier for sliding doors.
The alternative options of
an elegant, continuous pivot
rod or a short rod make the
system adaptable to anyroom situation. To meet
your design requirements,
DORMA BEYOND offers
a choice of pull handles
or lock/lever handle
combinations.
Developed with market
requirements in mind,
DORMA BEYOND offers
a practical alternative
whenever you need to
complement security,
safety, and functionalitywith attractive design.
Pinch free and easy action
No tears hereminimal pinch-free
gaps even with the short pivot rod.
The overpanel pivot fitting
a slim connector.
An option for the bottom pivot point
short rod on a floor pivot.
-
7/29/2019 Beyond_12-08_Lo[1]
4/16
DORMA BEYONDDORMA BEYOND Swing Door System
Short Pivot Rod
4
DORMA BEYOND swing door system
The DORMA BEYOND swing
door system is available with
either a short pivot rod or full
height continuous pivot rod.
The short pivot rod system
provides a versatile solution
regardless of the door dimen-
sions, while the continuous
pivot rod system offers com-
plete freedom from the risk of
trapped fingers. By locating
the pivot point of the swing
door right at the glass edge
and providing a round profile,
the continuous pivot rod re-
duces pinch hazards to zero.
DORMA floor pivots form the
ideal base for ensuring the
swing door always returns
safely and securely to its zero
position. For floor mounting
single-acting and particularly
double-acting doors, the
DORMA BTS floor closer
offers a convenient alterna-
tive to the floor pivot. In this
case, DORMA recommends
a glass sidelite because the
pivot point position requires
the closers to be buried under
the adjacent wall (page 13).
The top connection depends
on the type of unit. When
1/8"
(3m
m)
1/8"
(3 mm)
1/4"
(7mm)
1/8"
(3 mm)
1/8"
(3m
m)
1/8"
(3 mm)
1/8"
(3 mm)
1/4"
(7mm)
1/8"
(3m
m)
1/8"
(3 mm)
1/8"
(3 mm)
1/4"
(7mm)
1/8"
(3 mm)
1/8"
(3 mm)
1/8"
(3 mm)
Basic set for individual door.
For installation in masonry.
Basic set and overpanel fitting wall
connector for door with overpanel.
Optionally with sidelite on closing
side.
Basic set and overpanel fitting wall
connector for door with overpanel and
sidelite on pivot point side.
Optionally with sidelite on closing side.
Typical assemblies
For 3/8" (10 mm) glass
Art. No. 830.100
For 1/2" (12 mm) glass
Art. No. 830.101
Max. door weight:
176 lb (80 kg)
Max. door width:
39-3/8" (1000 mm)
Max. door height:
86" (2185 mm)
With overpanel
Max. overpanel width:
39" (990 mm)
Max. overpanel height:
23" (584 mm)
with short pivot rod
-
7/29/2019 Beyond_12-08_Lo[1]
5/16
Swing Door System
Continuous Pivot Rod
DORMA BEYOND
5
incorporating the glass door
into a tempered glass assem-
bly, an overpanel pivot fitting
forms the top connection.
In the case of doors in wall
openings, a top pivot bearing
is fitted to the ceiling or in
the header. Load transfer
from the overpanel and
sidelite can be supported
using a mechanical channel
(page 15).
Depending on customer
requirements, DORMA
BEYOND offers suitable
fittings for 3/8" (10 mm)
and 1/2" (12 mm) glass.
Finishes for fittings and
accessories (pages 1315):
EV1-Deco, similar to Clear
Anodized (114)
Similar to satin stainless
steel (107)
1/8"
(3m
m)
1/8"
(3 mm)
1/8"
(3 mm)
1/8"
(3 mm)
1/8"
(3 mm)
1/4"
(7mm)
1/8
"
(3m
m)
1/4"
(7mm)
1/8
"
(3m
m)
1/8"
(3 mm)
1/8"
(3 mm)
1/4"
(7mm)
1/8"
(3 mm)1/8"
(3 mm)
1/8"
(3 mm)
Typical assemblies
Basic fitting for individual door.
For installation in masonry.
Basic fitting and overpanel fitting wall
connector for door with overpanel.
Optionally with sidelite on closing side.
Basic fitting and overpanel fitting wall
connector for door with overpanel and
sidelite on pivot point side.
Optionally with sidelite on closing side.
with continuous pivot rod
For 3/8" (10 mm) glassArt. No. 830.110
For 1/2" (12 mm) glass
Art. No. 830.111
Please indicate exact door
height = glass measurement
with order.
Max. door weight:176 lb (80 kg)
Max. door width:
39-3/8" (1000 mm)
Max. door height:
86" (2185 mm)
With overpanel
Max. overpanel width:
39-3/8" (1000 mm)
Max. overpanel height:
24" (610 mm)
-
7/29/2019 Beyond_12-08_Lo[1]
6/16
DORMA BEYONDDORMA BEYOND Swing Door Fittings
Parts
6
BEYOND glass connector,
plastic, black,
for connection of side
panel at closing side.
For 3/8" (10 mm) glass
and 1/2" (12 mm) glass
Art. No. 830.320
1/8"
(3 mm)
1-1/8"
(30 mm)
2-3/4"
(70mm)
1-9/16"
( 40 mm)
1-3/4"
(44 mm)
5"
(128mm)
2-1/4"
(56 mm)
3/8"
(10 mm)
5/8"
(15 mm)
1-3/4"
(44 mm) 1-9/16"
( 40 mm)
5"
(128mm)
1-1/8"
(30 mm)9/16"
(15 mm)
3/8", 1/2"
(12, 10 mm)1/8"
(3 mm)
BEYOND overpanel fitting,
wall connector
with plastic socket
for top pivot.
For 3/8" (10 mm) glass
Art. No. 830.120
For 1/2" (12 mm) glass
Art. No. 830.121
BEYOND overpanel fitting,
glass connector
with plastic socket
for top pivot.
For 3/8" (10 mm) glass
Art. No. 830.130
For 1/2" (12 mm) glass
Art. No. 830.131
19/32"
( 15 mm)
1-9/16"
( 40 mm)
1-9/16"
( 40 mm)
1-3/4"
(44 mm)
1-3/4"
(44 mm) 6-13/16"(173mm)
5/8"
(16 mm)
6-13/16"(173mm)
5/8"
(16 mm)
19/32"
( 15 mm)
1-9/16"
( 40 mm)
1-3/4"
(44 mm)
Accessories
BEYOND basic set:
Pivoting fitting set,
short type
Set includes:
1 top pivot fitting with
pivot 19/32" (15 mm)
1 bottom pivot fitting with
insert for DORMA floor
closer spindle (90
turnable, e.g. DORMA
BTS80) or round pivot.
BEYOND basic fitting:
Pivoting fitting,
long type
with pivot 19/32" (15 mm)
at top and insert forDORMA floor closer
spindle (90 turnable,
e. g. DORMA BTS80) or
round pivot at bottom.
Short pivot rod basic set Continuous pivot rod basic set
-
7/29/2019 Beyond_12-08_Lo[1]
7/16
Swing Door
Glass Preparation
DORMA BEYOND
7
25/32"
(20 mm)5/16"
(8 mm)5/32"
(4 mm)
6-13/32"(163mm)
1"
(25 mm)
1-15/32"
(37 mm)
relief cut
2-1/32"(52mm)
2-17/32"(64mm)
4-5/32"(105mm)
5-29/32
"(150mm)
R1/4"
(R6mm)
R1/2"
(R12
mm
)
R1/4"
(R6mm)
R1/2"
(R12
mm)
Drawing shows bottom glass
penetration. Top edge of glass
is reversed accordingly.
Art. No. 830.100
Art. No. 830.101
Pivoting fitting set, short type
25/32"
(20 mm)
1-1/16"
(27mm)
19/32"
(15 mm)
2-3/8"(60mm)
4-5/32"(105
mm)
4-9/16"(116
mm)
relief cut
1"
(25 mm)
1-15/32"
(37 mm)
25/32" (20 mm)
5/16"
(8 mm)
3/16"
(4 mm)
R1/4"
(R6mm)
R1/2"
(R12
mm)
R1/4"
(R6mm)
R1/2"
(R12
mm)
Overpanel fitting Wall connector and glass
connector.
Art. No. 830.120
Art. No. 830.121
Art. No. 830.130
Art. No. 830.131
1/2"(12 mm) R
1/4"
(R6mm)
R1/2"
(R12
mm)
11/16"
(17 mm)
1-5/32"
(29 mm)
Wall/Sidepanel
R1/4"
(R6mm)
5/16" + 1/8"
(8 mm + 3 mm)
2-1/32"(52mm)
2-17/32"(64mm
)
4-5/32
"(105mm)
5-29/32"(150mm)
relief cut
Drawing shows bottom glass
cut. Top edge of glass is
reversed accordingly.
Art. No. 830.110
Art. No. 830.111
Pivoting fitting set, long type
-
7/29/2019 Beyond_12-08_Lo[1]
8/16
DORMA BEYONDDORMA BEYOND Sliding Door System
8
DORMA BEYOND sliding door
fittings are just as versatile,
safe, secure, and stylish as
their counterparts for pivoting
doors. Whether for wall
mounting or integrating into
a tempered glass assembly
(with overpanel and sidelite),
the BEYOND system offers
a functional, technically
proficient, and stylish solution
for any environment. Load
transfer from the overpanel
and sidelite can be effected
using a mechanical channel(page 15). The specified
glazing thickness for the
sliding door is 3/8" (10 mm).
Integrated within the track
rail, the stopper ensures that
the sliding door slows reliably
and precisely. The stopper
position can be changed at
any time.
The DORMA BEYOND sliding
door system has successfully
completed the DIN EN 1527
functional test with a Class 5
durability test (50,000 motion
cycles) and Class 3 initial
friction (corresponds to max.
40 N).
Finishes for fittings and
accessories (pages 1315): EV1-Deco, similar to Clear
Anodized (114)
Similar to satin stainless
steel (107)
1/8"
(3 mm)
3-1/8"
(80 mm)
TL = 2 OW 3/8" (10 mm)
1/8"
(3 mm)
1-3/16"
(30 mm)
1-3/16"
(30 mm)
3/8"
(10 mm)
PW =
OW5-3/16"(132 mm)
OW
GW =
OW + 2-3/8"
(60 mm)
Sliding door set glass for incorporation within a tempered
glass assembly.
DORMA BEYOND sliding door solutions
Max. door weight:
176 lb (80 kg)
Standard sets for clear
opening widths of
33-7/16" (850 mm)
39-3/8" (1000 mm)
49-1/4" (1250 mm)
59-1/16" (1500 mm)
Max. overpanel height:
24" (600 mm)
Min. gap of track rail to
wall and ceiling:
10" (250 mm)
PW = Passage width
OW = Opening width
GW = Glass width
TL = Track length
TL = 2 OW 1-1/2" (40 mm)
3-1/8"
(80 mm)
3/8"
(10 mm)
1-3/16"
(30 mm)
1-3/16"
(30 mm)
PW
GW =
OW + 2-3/8"
(60 mm)
OW
Typical Assemblies
Sliding door set glass for incorporation within a wall mount
assembly.
Drawing shows opening
corresponds to position of
the door in the assembly
seen from the fitting.
-
7/29/2019 Beyond_12-08_Lo[1]
9/16
Sliding Door SetsDORMA BEYOND
9
BEYOND
Sliding door glass mount,
for integration within a
tempered glass assembly.
Set includes:1 Track profile basic part
with track profile outer
part incl. distance pieces
endcaps and cover clips
1 Cover profile incl.
endcaps and cover clips
2 Roller carriers
2 Endstops
1 Floor Guide
OH
=DLO+1-9/16
(40mm)
GH
=DLO+1"(25mm)
1-3/8"
(35mm)
1-9/16"
(40mm)
1-3/4" (45 mm)
11/16"
(18 mm)
1-11/16" (43 mm)
3/8"
(10 mm)
3/8"
(10 mm)
3/8"
(10mm)
DLO
TL = 2 OW 3/8" (10 mm)
Clearopeningwidth
Openingleft
Art. No.
Openingright
Art. No.
33-7/16" (850 mm) 830.210 830.211
39-3/8" (1000 mm) 830.212 830.213
49-1/4" (1250 mm) 830.214 830.215
59-1/16" (1500 mm) 830.216 830.217
DLO
GH
=DLO+1-9
/16"(40mm)3/4"
(18 mm)
1-9/16"
(40mm)
1-9/16"
(40mm)
1"
(26 mm)
1-3/4" (45 mm)
1-11/16" (43 mm)
1-3/8"
(35mm)
OH=DLO+2-1/8"(54mm)
3/8"
(10 mm)
3/8"
(10 mm)
TL = 2 OW 1-9/16" (40 mm)
OH = Overall height
DLO = Day light opening
GH = Glass height
Sliding doors glass mount
BEYOND
Sliding door wall mount,
for single door mounted onto
wall.
Set includes:
1 Track profile basic part with
track profile outer part incl.
endcaps and cover clips
1 Cover profile incl. endcaps
and cover clips
2 Roller carriers
2 Endstops
1 Floor Guide
Clearopeningwidth
Openingleft/rightArt. No.
33-7/16" (850 mm) 830.250
39-3/8" (1000 mm) 830.251
49-1/4" (1250 mm) 830.252
59-1/16" (1500 mm) 830.253
Sliding doors wall mount
OH = Overall height
DLO = Day light opening
GH = Glass height
-
7/29/2019 Beyond_12-08_Lo[1]
10/16
DORMA BEYONDDORMA BEYOND Sliding Door
Glass Preparation
10
For a tempered glass
assembly, clear opening
width 33-7/16" (850 mm).
Art. No. 830.210
Art. No. 830.211
(Drawing shows 830.210
corresponds to OH opening.
For 830.211 the glass,
preparation is mirrored.)
Overpanel and sidelite 33-7/16" width (850 mm)
33-1/4"
(844 mm)
1/8"
(3 mm)
2-3/16"
(55 mm)
11-7/32"
(285 mm)
11-3/16"
(284 mm)
OW = 33-7/16" (850 mm)
9-15/16"
(253 mm)
9-15/16"
(252 mm)
1-3/16"
(30 mm)
1/2"
(12m
m)
2-3/16"
(55 mm)
1"
(26mm)
OH
2-3/16"
(55 mm)
1/8"
(3 mm)
2-3/16"
(55 mm)
2-3/16"
(55 mm)
2-3/16"
(55 mm)
2-3/16"
(55 mm) 2-3/16"
(55 mm)
1"
(26mm)
1"
(26mm)
For a tempered glass
assembly, clear opening
width 39-3/8" (1000 mm).
Art. No. 830.212
Art. No. 830.213
(Drawing shows 830.212
corresponds to OH opening.
For 830.213 the glass,
preparation is mirrored.)
Overpanel and sidelite 39-3/8" width (1000 mm)
39-1/8"
(994 mm)
1/8"
(3 mm)
2-3/16"
(55 mm)
OW = 39-3/8" (1000 mm)
12-15/16"
(328 mm)
12-7/8"
(327 mm)
1-3/16"
(30 mm)
1/2"
(12m
m)
2-3/16"
(55 mm)2-3/16"
(55 mm)
1"
(26mm)
OH
2-3/16"
(55 mm)
1/8"
(3 mm)
14-3/16"
(360 mm)
14-5/32"
(359 mm)
2-3/16"
(55 mm)
2-3/16"
(55 mm)
2-3/16"
(55 mm)2-3/16"
(55 mm)1"
(26mm)
1"
(26mm)
All holes drilled in glass: diam. = 1/2" (12 mm)
OH = Clear opening height
OW = Clear opening width
OH = Clear opening height
OW = Clear opening width
All holes drilled in glass: diam. = 1/2" (12 mm)
-
7/29/2019 Beyond_12-08_Lo[1]
11/16
1
49"
(1244 mm)
1/8"(3 mm)
2-3/16"
(55 mm)
OW = 49-1/4" (1250 mm)
17-27/32"
(453 mm)
17-13/16"
(452 mm)
1-3/16"
(30 mm)
1/2"
(12m
m)
2-3/16"
(55 mm)2-3/16"
(55 mm)
1"
(26mm)
OH
2-3/16"
(55 mm)
1/8"(3 mm)
19-3/32"
(485 mm)19-1/16"
(484 mm)
2-3/16"
(55 mm)
2-3/16"
(55 mm)
2-3/16"
(55 mm)
2-3/16"
(55 mm)1"
(26mm)
1"
(26mm)
Overpanel and sidelite 49-1/4" width (1250 mm) For a tempered glass
assembly, clear opening
width 49-1/4" (1250 mm).
Art. No. 830.214
Art. No. 830.215
(Drawing shows 830.214
corresponds to OH opening.
For 830.215 the glass
preparation is mirrored.)
All holes drilled in glass: diam. = 1/2" (12 mm)
14-7/16"
(367 mm)
14-7/16"
(367 mm)
14-7/16"
(367 mm)
OH
1/2
"
(12m
m)
OW = 59-1/16" (1500 mm)
58-13/16"(1494 mm)
1/8"
(3 mm)
2-3/16"
(55 mm)
1-3/16"
(30 mm)
2-3/16"
(55 mm)
2-3/16"
(55 mm)
2-3/16"
(55 mm)
1"
(26mm)
2-3/16"
(55 mm)
2-3/16"
(55 mm)
2-3/16"
(55 mm)
2-3/16"
(55 mm)
2-3/16"
(55 mm)
2-3/16"
(55 mm)
1/8"
(3 mm)
15-9/32"
(388 mm)
15-9/32"
(388 mm)
15-9/32"
(388 mm)
1"
(26mm)
1"
(26mm)
Overpanel and sidelite 59-1/16" width (1500) For a tempered glass
assembly, clear opening
width 59-1/16" (1500).
Art. No. 830.216
Art. No. 830.217
(Drawing shows 830.216
corresponds to OH opening.
For 830.217 the glass,
preparation is mirrored.)
OH = Clear opening height
OW = Clear opening width
OH = Clear opening height
OW = Clear opening width
All holes drilled in glass: diam. = 1/2" (12 mm)
-
7/29/2019 Beyond_12-08_Lo[1]
12/16
DORMA BEYONDDORMA BEYOND Sliding Door
Glass Preparation
12
Regardless of door width,
glass preparation (OH edge
shown here) applies
correspondingly in mirror
image for the right edge.
Sliding door
4-15/16"
(125 mm)
2-31/32"
(75 mm)
1-19/32"
(40 mm)
3-15/16"
(100 mm)
1-25/32"
(45 mm)
13/32"(10mm
)
9/32"(7mm)
R3/8"(R10mm)
R1/4"
(R6mm)
R1/4"(R6m
m)
25/32"(20mm
)
relief
R25
/32"
(R20
mm)
-
7/29/2019 Beyond_12-08_Lo[1]
13/16
AccessoriesDORMA BEYOND
13
Top pivot bearing,
aluminum, for installation
in frame or ceiling for
19/32" ( 15 mm) pivot
pin.
Art. No. 901.130
Eccentric socket, zinc coated
brass, with adjustable plastic
socket insert.
Art. No. 905.194
Floor pivot bearing with round
pivot 9/16" ( 14 mm),
and pin 1" ( 24 mm)
max. door weight
220 (100 kg).
Art. No. 901.107
1"(25mm)
1-3/16"(30mm)
19/32 "
( 15 mm)
1"
(25m
m)
7/16"
(11
mm)
9/16"(14mm)
1"(24mm)
1- 1
/4"
( 3 1
mm
)
1-9/16"(40mm)
1"(25mm)
19/32"(15.5mm)
3/16"
(5mm)
1-1/4"(32mm)
3-5/8"(92mm)
19/32"
(15mm)
1"
(24mm)
9/16"
(14mm)
DORMA BEYOND Accessories
Floor pivot bearing with round
pivot 9/16" ( 14 mm),
and cover plate; height
adjustable by 3/16" (5 mm),
max. door weight
220 lb (100 kg).
Art. No. 901.106
Pivot bearings
DORMA BTS option:
If you use a BTS closer,
DORMA recommends
including a glass sidelite
because the pivot pointposition requires the closers
to be buried under the
adjacent wall.
Pivot point
15/16" (23 mm)
1/8"
(3 mm)
1-3/16"(30 mm)
1/4"
(7mm)
BTS option
-
7/29/2019 Beyond_12-08_Lo[1]
14/16
Length (L) Art. No.
17-3/4" (450 mm) 830.300
23-5/8" (600 mm) 830.305
35-7/16" (900) 830.310
DORMA BEYONDDORMA BEYOND Accessories
14
ARCOS handle bar
Satin stainless steel,
for 3/8" (10 mm) and
1/2" (12 mm) glass
thickness, two-hole fixing.
Length (L) Art. No.
13-3/4" (350 mm) 830.500
29-1/2" (750 mm) 830.510
13-3/4"
(350mm)
15-5/8"
(398mm)
29-1/2"
(750mm)
32-7/16"
(824mm)
3-3/8"
(86 mm)
2-1/2"
(63 mm)
13-3/4"
(350mm)
29-1/2"
(750mm)
min. 3-1/8"
(80 mm)
min. 5/8"
(16 mm)
3/8"
(10 mm)
1/2"
(12 mm)Glass thickness
Bolt length
3/8",1/2"
(10,
12mm)
1-3/8"
( 35 mm)
L
3-1/8"
(80 mm)
7-3
,23-58,
35-7
6
(450,
600,
900mm)
3-1/8"
(80 mm)
7/8"
(22mm
)
7/8"
(22mm
)
BEYOND handle bar for 3/8"
(10 mm) and 1/2" (12 mm)
glass, two-hole fixing.
Handles
-
7/29/2019 Beyond_12-08_Lo[1]
15/16
15
Mechanical channel
e.g., as all around frame
system for tempered glass
assemblies, with fittings
on sides and ceiling,
consisting of: base section,
with tapped holes every
11-13/16" (300 mm), incl.
clamping parts with screws
and gasket strips.
Base profile, 118" (2997 mm)
stock length
for 3/8" (10 mm) glass
Art. No. 907.001
for 1/2" (12 mm) glass
Art. No. 907.002
1-1/4"
(32 mm)
3/4"
(18 mm)
1-9/16"
(40mm)
1-9/16"
(39.5 mm)
Clip on cover profile
118" (2997 mm) stock
length, also available in
brass, stainless steel satin,
and stainless steel polished.
Art. No. 907.003
Note: For further accessories
and locks see appropriate
technical brochures from
DORMA Glas.
Mechanical channel
Clip on cover
-
7/29/2019 Beyond_12-08_Lo[1]
16/16
DORMA Glas, Inc.
1520 Jabez Run
Suite 303
Millersville, MD 21108
Tel: 410.923.0890
Toll Free: 800.451.0649
Fax 410.923.3060
E-mail: [email protected]
www.dorma-usa.com