IT JUST WORKS

BETTER!

G96 PRODUCTS INC.85-5th AVE., BLDG. 6 • PATERSON, NJ 07524

Tel: 973.684.4050 • Toll Free: 1.877.332.0035 • Fax: 973.684.3848E-mail: info@g96.com • Website: www.g96.com

FIRING TESTS PASSED4 Salt Water Immersion

4 Dynamic Dust

4 Cold Temperature

LAB TESTS PASSED4 Flash Point, min. 65˚C (149˚F)

4 Pour Point, min. –59˚C (–74˚F)

4 Viscosity, Kinematic (with solvent) at +40˚C (104˚F), min, (Value 14 cst)

4 Viscosity, Kinematic (w/solvent evaporated) at –40˚C (–40˚F), max. (Value 5,000 cst)

4 Wear Preventive Characteristics, avg., Scar Diameter, max. 0.8mm

4 Falex Load Carrying Capacity, Jaw Load, min. 500 lbs.

4 Firing Residue Removal

4 Metal Corrosion Protection

4 Humidity Resistance (After 900 hours of exposure)

4 Salt-Spray Resistance (After 100 hours of exposure)

4 Corrosion Protection from Propellant Reaction Products

4 Interference with Chemical Agent Detector Paper

4 Toxicity

G96 is one of the most trusted names in gun lubricants and cleaning products. Our products are used worldwide by federal, state and local governments,

law enforcement, military and security personnel. G96 gained its trusted reputation over a period of 50 years in which recreational hunters and shooters used its products.

G96 truly lives up to its reputation! Just ask any of our customers and they’ll tell you why...

It just works better!

Gun TreatmentG96 “Triple Action” Gun Treatment is the finest, most complete gun care product made. It cleans, lubricates, and protects in one operation. No solvents or preservatives are necessary. Safe for use on polymers.

Cleans: Contains solvents which will completely remove all traces of rust, gun powder, leading and corrosion.Lubricates: Contains lubricants which will not freeze, oxidize, evaporate or leave a gummy residue. Keeps firing pin and all moving parts working as low as –50˚F below zero. Ensures perfect firing every time.Protects: Leaves invisible magnetic film over all metal parts which protects your gun against rust under all weather conditions, even salt water spray. Protects frequently handled guns against “fingerprint” damage.

Our unique formulation of active lubricants will not freeze, oxidize or evaporate. Formulated with a pleasant odor, this gun treatment ensures perfect firing from –50˚F to +350˚F.G96 1055 – 4.5 oz. aerosol can G96 1055P – 12 oz. aerosol can*Bilingual packaging is also available for Canada. Please specify when ordering.

Gun OilG96 Gun Oil is the same formula as G96 Gun Treatment, except it is a liquid and not an aerosol spray.

G96 1054 – 4 fl. oz. bottle with twist cap

G96 1054G – 1 gallon container

Also available in 55 gallon drums. Please contact us for special pricing.* Bilingual packaging is also available for Canada. Please specify when ordering.

Synthetic CLP Gun OilMilitary Approved

G96 Synthetic CLP Gun Oil has been approved for use by the U.S. Army for 21st century cleaning, lubricating, and preservation of both small and large caliber weapons and weapons systems (Military Spec MIL-PRF 63460E & NATO S-758).

This product is formulated for maximum gun and environmental protection. It is 85% biodegradable and contains no solvents or VOC’s.

Cleaner: Significantly improves clean up after firing.Lubricant: Original tolerances will be maintained longer under extreme conditions.Preservative: Unique combination of additives protects and bonds to metal, yet it is safer for the environment than most other additives.

Safe for use on polymers.

National Stock Number G96 Stock Number

9150-01-102-1473 G96 1070 – 0.5 fl. oz. cylindrical plastic bottle in natural9150-01-079-6124 G96 1053M – 4 fl. oz. flat oval plastic bottle in natural9150-01-054-6453 G96 1071 – 1 pint cylindrical plastic bottle w/sprayer in white9150-01-327-9631 G96 1072 – 1 liter cylindrical plastic bottle w/sprayer in white9150-01-053-6688 G96 1053G – 1 gallon plastic bottle in natural

Retail Stock Number

G96 1070 – 0.5 fl. oz. bottle Also available in 55 gallon drums. G96 1053 – 4 fl. oz. bottle Please contact us for special pricing.

NOTE: Lubricants which used to be qualified under MIL-PRF-63460D or earlier are no longer valid and do not meet the criteria of the new 63460E specification. Military organizations should be cautioned not to use lubricants which are no longer approved.*Bilingual packaging is also available for Canada. Please specify when ordering.

U.S. ARMYAPPROVEDMeets & ExceedsMIL-PRF 63460E

& NATO S-758

Synthetic CLP Gun OilFor the 21st Century

Crud Buster 2 Gun CleanerCrud Buster 2 is used to help remove dirt particles from difficult to reach areas without disassembling the firearm. Crud Buster 2 leaves no residue. It is a powerful aerosol spray that helps “blast away” dirt and crud.

G96 Gun Treatment, G96 Gun Oil or G96 Synthetic CLP Gun Oil should be applied after using Crud Buster 2.

The high pressure cleaning solvent contained in this product effectively cleans all moving metal parts such as triggers, ejectors, extrac-tors, etc. The extension tube which inserts into the valve head produces a high pressure spray. This allows the solvent to penetrate and remove soluble as well as insoluble particles from the gun. It is excellent for use on rifles, shotguns and pistols.

DO NOT USE ON PLASTICS OR POLYMERS.

G96 1201 – 16 oz. aerosol spray can* Bilingual packaging is also available for Canada. Please specify when ordering.

Bore SolventNew and Improved Formula

Removes leading, powder residue and copper fouling from bore of firearm.

Safe to use on metals. Will not cause rust, oxidation, staining or galvanic corrosion. May be harmful to some paints, varnishes and plastics. Keep product OFF of these types of surfaces unless a previous patch test has shown no ill-effect. It is recommended that the firearm be re-treated with G96 Gun Treatment, G96 Gun Oil or G96 Synthetic CLP Gun Oil after using Military Grade Bore Solvent.

G96 1107 – 16 fl.oz. G96 1108 – 4 fl.oz.* Bilingual packaging is also available for Canada. Please specify when ordering.

Nitro SolventEspecially designed for the serious skeet and trap shooter. It neutralizes the corrosive acid residue buildup from the plastic shot shells. Heavy duty solvents quickly remove leading, powder residue and metal fouling for a sparkling clean bore. Aerosol spray application ends loss of effectiveness due to evaporation of solvents and contamination due to dirty particles. May be harmful around painted metal, plastic, synthetic or varnished stocks. It is recommended that the firearm be re-treated with G96 Gun Treatment, G96 Gun Oil or G96 Synthetic CLP Gun Oil after using Nitro Solvent.

G96 1105 – 6 oz. aerosol can* Bilingual packaging is also available for Canada. Please specify when ordering.

Rust BusterRust Buster Detergent Action Penetrating Oil quickly changes rust and dirt from a solid to a liquid.

Good for hundreds of industrial uses: frees rusted nuts, bolts, studs, locks, sticky valves, frozen battery terminals, jammed and locked mechanisms, corroded bolts on mufflers and tailpipes. Lubricates automotive shocks, manifolds, heat control valves and throttle linkages. Removes grime, grease and carbon from engine heads. Cleans and lubricates lawn mowers, door hinges, locks, window cranks, bicycles, sewing machines, outboard marine motors, farm machinery and earth moving equipment.

Used by airlines, truck and bus fleets, plumbers, garage and industrial maintenance personnel, etc.

G96 1051A – 11 oz. aerosol spray can

Gun Blue CremeHighly recommended over all other brands by gun enthusiasts and gun-smiths. Mirror-like finish is guaranteed to blend perfectly into the original blueing. Leaves no streaks or spots; will not rub off or discolor.

G96 1064 – 3 oz. bottle* Bilingual packaging is also available for Canada. Please specify when ordering.

Gun Blue LiquidThis product is for those who prefer a liquid touch-up blueing. Blues instantly producing a rich blueing which will not rub off or discolor.

G96 1069 – 2 oz. bottle

Gun Blue StickInstant action gun blue pen-type dispenser makes it easy to touch up small marks and scratches with a minimum of preparation. Produces a rich, dark blue which will not rub off or discolor. Ideal for use on finger guards, barrel tips, etc. For best results, clean with G96 Gun Degreaser and finish with G96 Gun Treatment, G96 Gun Oil or G96 Synthetic CLP Gun Oil.

G96 1078 – 10 cc pen

Gun DegreaserCleans and degreases metal. Suitable before blueing. Non-flammable, non-toxic, biodegradable.

G96 #1068 – 4 fl. oz. bottle

Silicone Gun and Reel ClothSilicone cloth puts a deep, like-new luster on all metal surfaces to repel dirt, prevent finger marks and displace moisture. Constructed of 14x15 inch heavy-weight flannel and fully impregnated with a new exclusive blend of silicone, lubricating oils and corrosion inhibitors. Cleans, polishes and protects all metal and wood surfaces. Use on guns, gun sights, fishing tackle, reels, tools, scopes and automobile accessories. Protects metal surfaces from rust and corrosion.

G96 1093 – 210 sq. in.

* Bilingual packaging is also available for Canada. Please specify when ordering.

Silicone Gun MittEasy way to care for guns. Cleans, polishes and protects all metal and wood surfaces. New Gun Mitt design makes it easy to use on guns, gun sights, fishing tackle, reels, tools, scopes and automobile accessories.

Impregnated with a new exclusive blend of silicone, lubricating oils and corrosion inhibitors. Protects metal surfaces from rust and corrosion.

G96 1083 – gun mitt

* Bilingual packaging is also available for Canada. Please specify when ordering.

Anti-Fog ClothChemically-treated for use on rifle scopes, ski goggles, glasses and windshields.

G96 1085S – 77 sq. in.

Fabric WaterproofingThoroughly waterproofs clothing and outer wear, allows fabric to breathe and is completely invisible. Leaves no odor, is not sticky or greasy. Long lasting through repeated washings.

Not for sale in California

G96 1060A – 7.8 fl. oz. aerosol can

Leather & Boot WaterproofingG96 Leather and Boot Waterproofing is a new scientific formula which makes leather waterproof without impairing its breathability. Maintains leather flexibility at low temperatures and extends life in presence of salt and alkalis. Good for use on old and new leather. Not sticky, leaves leather smooth to the touch.

Used by skiers, hunters, fishermen, horsemen, garage personnel, police and outdoor workers.

This product contains no chlorinated propellant.

THIS PRODUCT IS NOT RECOMMENDED FOR SYNTHETICS OR SUEDE.

Not for sale in California

G96 1062 – 6.75 fl. oz. aerosol can

Linseed OilAn improved version of an old favorite, this highly refined and modified linseed oil, combined with driers and other additives, produces a magnificent finish on refinished or brand new gun stocks.

Easy to apply, fast drying, weather-resistant finish.

For use on old and new stocks. Produces high-luster or satin stain finish as desired.

G96 1091 – 2.5 fl. oz. bottle

Silicone SprayAll purpose silicone spray eliminates sticking and binding as it lubricates, penetrates and prevents rust. Use on any surface including metal, glass, rubber and plastic. Not affected by temperature from –40˚F to +450˚F.Good for many uses: Home, Sports, Automotive, Marine, Shoe and Textile Industries, Heating, Sealing and Packaging Equipment. This product contains no fluorocarbon propellant.

Not for sale in California

G96 1087 – 10 fl. oz. can

Toll Free: 1.877.332.0035 • E-mail: info@g96.com • Website: www.g96.com