Betoncoat - Beschichtung Pur (8)-En
-
Upload
linsonlinson -
Category
Documents
-
view
3 -
download
0
description
Transcript of Betoncoat - Beschichtung Pur (8)-En
Entered in the commercial register of Düsseldorf under HR A 4683
ENKE BETONCOAT PUR coating Product description
Brief description ENKE BETONCOAT PUR coating is a solvent-free, self-levelling and pre-formulated low-odour 2K polyurethane coating.
Properties PUR flow coatings are viscoplastic, very abrasion-resistant, mechanically and chemically highly resilient, exhibiting excellent adhesion to the most varied kinds of substrates found in a building. Due to the nearly vapour-proof properties of the PUR system the substrate must be dry before coating. The residual moisture must be no more than 3 wt%. Please also note that rising damp may cause blistering.
Purpose Creation of flooring resistant to wear and chemicals, especially for highly loaded industrial floors. Also very suitable as durable and hard-wearing coating for cellar and garage floors, etc. Substrates consisting of cement screed or concrete, other mineral-bound substrates and possibly also mastic asphalt lend themselves to be coated (we recommend 1K primer as a wash primer for mastic asphalt).
Technical data Delivery form of comp. A: viscous Delivery form of comp. B: low viscosity Mixing ratio: 23.0 pbw (A) + 3.0 pbw (B) Viscosity (A + B): approx. 10,000 mPa·s (20°C) Density (A + B): approx. 1.7 g/cm³ (20°C) Pot life: approx. 25 minutes (20°C) Shore D hardness: approx. 55
Application V-notch trowel, smoothing trowel or squeegee
Consumption Approx. 1.7 kg/m² per mm of layer thickness (but at least 2.5 kg/m²)
Delivery form Component A: 23.0 kg disposable containers Component B: 3.0 kg disposable containers
Storage Cool and dry
Shelf life In unopened original containers at max. + 25°C: at least 6 months
Disposal As soon as you have finished using the product, empty the containers completely to allow proper disposal, ensuring they are scraped out and drip-free. Tin containers emptied of residue can be recycled using appropriate steel recycling channels. As a certified user of the German recycling logo ENKE can provide a list of collection points.
The user shall dispose of non-hardened adhesive materials or larger amounts of product residues in tin containers at his costs as this is special waste.
All information provided in this product description is based on our current knowledge and practical experience. However, our information and recommendations do not release the user from his obligation to ascertain the suitability of our products for the intended application. Be sure to consult our factory before carrying out restorations on unfamiliar or unusual substrates. Since a professional application is beyond our scope of control, our warranty covers only the condition of the material. Improper application and all and any damage resulting therefrom shall be excluded from our warranty. This product description supersedes all previous versions. Düsseldorf, December 2007 PB BC BsPUR 8
ENKE-WERK Johannes Enke GmbH & Co. KG, Hamburger Str. 16, 40221 Düsseldorf, Tel.: 0211/304074, Fax: 0211/ 393718 E-mail: [email protected] Internet: www.enke-werk.de