BETEX MAINTENANCE PRODUCTS - Canstar Instruments · 2019. 11. 29. · ANNO 1978 Dear reader, We are...

ANNO 1978

BETEX®MAINTENANCE PRODUCTS

WWW.BEGA.NL

GB

ANNO 1978

Dear reader,

We are proud to present our catalogue of BETEX Maintenance Products.

Here you will find our BETEX® Special Tools programme for maintenance (MRO) and production (OEM):

• Condition Monitoring: measuring equipment for bearings, temperatures, noise and vibrations etc • Dismounting: mechanical and hydraulic pullers, self-centering pullers up to 100 t capacity, work shop

equipment, auxiliary tools • Hydraulic equipment: BETEX Hydraulic Power • Mounting & Alignment: induction heaters, fitting tool sets, shims, alignment computers

About Bega Special ToolsWe have been developing and manufacturing 'Special Tools' since 1978 and we provide solutions for damage-free mounting and dismounting of bearings and drive components. Our expertise and experienceensure quality, reliability, professional advice and outstanding service. BETEX® is a registered trademark of Bega Special Tools and stands for quality and reliability.

Please also order our catalog for:• BETEX® Induction heaters for maintenance (MRO) and production (OEM).

For mounting and dismounting.

Please do not hesitate to contact our Sales department or one of our dealers. We will be pleased to help you.

Your Bega Team.

MOUNTIN

G CHECKING

DISMOUNTI

NG

Professional Solutions With Proven Quality & Performance!

03

©Bega International bv 2013/04. Technical modifications reserved. Bega is not responsible for damage occurring as a direct or indirect result of the use of the information from this publication.

TÜV Rheinland Group

BETEX®

06

10

34

72

04

Condition MonitoringCondition monitoring instruments

DismountingMechanical and hydraulic pullers up to 100t

Hydraulic equipmentCylinders, pumps, jacks

Mounting and alignment Induction heaters, fitting tool sets,Shims, alignment computers

MAINTENANCE PRODUCTS

INDEXConditioning Monitoring

Bearing Checker .......................................... 06VibChecker .................................................. 071220, 1230, 1250, 1300 thermometers ....... 081510 DB meter, 1620 tachometer,ELS 12 stethoscoop .................................... 09

Hydraulic pullersHP hydraulic pullers ..................................... 10HSP hydraulic pullers .................................. 11HXP hydraulic pullers .................................. 12HXPC 50 mobile hydraulic pullers ............... 13Tri-Section hydraulic pullers ........................ 14HPP Push Puller .......................................... 15

Accessory setsBearing Splitters .......................................... 16Tri-Section Plates ........................................ 17

Mobile hydraulic pullersMobipuller 25 & 50 ton ................................. 18 HXPM 50 ..................................................... 20HXPM 100 ................................................... 22BPP Puller Pusher 100 ton ......................... 24

Mechanical pullersMSP mechanical puller ................................ 26KZZ key-drawer ........................................... 2746, 47, 48/49 ................................................ 2852, 54 ........................................................... 2956, 44, 625/630 ............................................ 3062 ................................................................. 3163, 64/tracta ................................................. 32Collets for 63, 64 /tracta .............................. 33

HydraulicsExplanation cylinders .................................. 34SSS cylinders .............................................. 35SLS cylinders ............................................... 36SCS cylinders .............................................. 37SHS cylinders .............................................. 38JLLC cylinders ............................................. 39JLPC cylinders ............................................. 40SSA cylinders .............................................. 41ALNC cylinders ............................................ 42ACHC cylinders ........................................... 43DAC cylinders .............................................. 44ADAC cylinders ............................................ 45PB/HC heavy duty hand pumps .................. 46AHP heavy duty aluminium hand pumps .... 47

HP35 hand pumps ....................................... 48HP80 hand pumps 8L .................................. 49HP160 hand pumps 16L ............................. 50FHB foot pumps .......................................... 51AP 921 air pumps ....................................... 52AP1600, 3000 air pumps ............................ 53AP 8000 air pumps ..................................... 54EP 18 elektric hydraulicpumps .................... 55EP 211 elektric hydraulicpumps .................. 56AHP/UHP high pressure alu. hand pumps .. 57UHAP 2800 high pressure air pumps .......... 58Accessories: hoses, etc ............................... 59Accessories: connectors, gauges, couplers 60CJ jacks ....................................................... 63TOE jacks .................................................... 64PPK portable power kits .............................. 65TLS hydraulic spreaders/lifters .................... 66Nutsplitter .................................................... 67WSP workshop presses .............................. 68Mobilift workbench ...................................... 69Safety tips .................................................... 70

Fitting tool sets .............................................. 72

Induction heaters .......................................... 74

Shims .............................................................. 76

Alignment computersFixturelaser Dirigo ....................................... 78Shaft alignment system E420, E530 ........... 79 Pully alignment laser D90, D130, D160 ...... 80PAT .............................................................. 81

05

BETEX® MAINTENANCE PRODUCTS

06

An economic three- in-one-instrument for condition monitoring. Bearing Checker is unique, being the first portable,pocketsize instrument (weight 185 g, size 158 x 62x 30 mm) for evaluated shock pulse measurement. Besides shock pulses, Bearing Checker measuresmachine surface temperature with infrared light, andcan also be used as an electronic stethoscope forlistening to machine sounds.

The instrument can be used on most rotating machinery, in a diversity of industrial environments,such as:• electric motors• fans• pumps

Bearing Checker - your affordable expertMachine breakdowns are frequently caused by bearing damage. Unplanned downtime, as well asunnecessary repair work, can be significantly reduced by periodically checking bearing condition.

The Bearing Checker is inclusive:• Infra-red thermometer• Electronic Stethoscope• Manual, quick-start instruction• DVD with technical documentations• Batteries

BETEX®BETEX BEARING CHECKER

Advantages:• proactive approach to maintenance• useful and economical complement to your

maintenance toolbox• no specialized training• potential problem sources can be detected well

before damage is detectable by heat or vibration.

CHECKING (MONITORING)

07

VibChecker – portable and user friendly vibration measurementVibChecker is a light and compact-sized instrumentfor vibration measurement in the 10-1000 Hz frequency range. Measurement results are immediately and automatically evaluated against ISO standards. Green - yellow - red LEDs indicatevibration severity and a real time FFT spectrum isproduced for easy pattern recognition. Results canbe stored for documentation and follow-up.With its built-in probe, easy button operation andclear symbols, VibChecker is an all set to go instrument; just point the probe and measure to locate vibration-related problems.

Vibration monitoring is a cost-effective predicitive maintenance tool. In most cases, vibration measurement can detect aproblem long before damage to the machine isdone. The repair of equipment failing while in service is many times costlier than planned repairsmade possible through vibration monitoring.

Minding your machineryMachine vibration is the cause of many problems inindustrial equipment. Integrated in your normalmaintenance activities, periodic vibration measurement with VibChecker will go a long way tohelp keep your equipment operational. VibCheckercombines handiness and ease of use with cost effectiveness and durability. Suited to both new andexperienced users, VibChecker covers the basic vibration monitoring needs of your maintenance organization.

BETEX®CHECKING (MONITORING)BETEX VIBCHECKER vibration monitoring

08

The thermometers all have:• Backlit display• Precision 0.1°C• Automatic "hold" function• Readable temperature of 0.1°C• Measurement in Celsius or Fahrenheit

BETEX 1220 - LASER TEMPERATURE TO 300°C• Measurement range: -50°C - 300°C• Fast response time (within 0.9 sec.)• Dimensions: 155x50x72 mm• Power supply: 2 AAA batteries (included)• Weight: 68 gr.

BETEX 1230 - LASER TEMPERATURE TO 380°C• Measurement range: -50°C - 380°C• Max. height: 1500mm• Fast response time (within 0.5 sec.)• Dimensions: 185x135x38 mm• Power supply: one 9V battery (included) and carrying case with strap• Weight: 178 gr.

BETEX 1250 - LASER TEMPERATURE TO 1000°C• Measurement range: -50°C - 1000°C• Max. height: 1500mm• Fast response time (within 0.5 sec.)• Dimensions: 170x50x90 mm• Power supply: one 9V battery (included) and carrying case with strap• Weight: 178 gr.

BETEX 1300 - LASER TEMPERATURE TO 1370°C• Measuring range: -100°C - 1370°C• Also suitable for surface measurement• Dimensions: 120x68x31 mm• Power supply: 9V battery, linen bag and manual• Weight: 112 gr.

CHECKING (MONITORING)LASER THERMOMETEROur digital laser thermometers are ideal for fast and safe measurement of liquids, gases, and many other substances,also suitable for temperature measurements of motors, brake systems, heating systems, etc. The built-in laser pointercan determine the correct measuring point distance, measured value can then be within half a second read and recorded automatically.

BETEX®

09

CHECKING (MONITORING)DECIBEL METER / TACHOMETER / STETHOSCOPE

BETEX®

BETEX 1510 - DECIBEL METER - SOUND METERWith this professional microprocessor controlled sound level meter you can accurately measure the volume. The meteris carried out in a robust ABS housing and is designed such that it is to handle comfortably.

The instrument features an extra large display with digit height 20 mm. The meter also has a hold function to hold themeasurement data on the display and has the capability to carry out measurement interval, wherein the time betweeneach measurement can be set up. In these measurements, the time, and sensitivity to be selected independently. Also, it is possible to store the highest value automatically

• Measuring range: 40-130 dB (A)• Frequency: 31.5 Hz - 8500 Hz• Resolution: 0.1 dB• Power: 1x 9V battery. (incl.)• AC adapter connector• Dimensions: 260x69x32mm• Weight: 350 gr

Includes:• Microprocessor controlled sound meters• Windcap for microphone• PE storage case and instruction guide

BETEX 1620 – DIGITAL LASER TACHOMETERThis digital laser tachometer is very suitable for maintenance and servicing of engines, rotating equipment and machines.

• 5-digit 10mm LCD display.• Test Range of measurement: 5 to 99,999 rpm.• Display: 0.1 r.p.m.. at 0.5 to 999.99 r.p.m.• Display: 1.0 r.p.m. above 1000 r.p.m.• Accuracy + / - 0.5%• Measuring distance 50 to 300 mm.• Memory: last, maximum and minimum measured value.• Operates on 1 x 9 volt battery.• Dimensions: 72x190x37 mm.• Weight: 250 grams.

Includes:• 3 Reflective tape strips.• Carrying case and instruction manual

BETEX ELS12 ELECTRONIC STETHOSCOPEFor preventive maintenance on installations and rotating equipment. A simple method to detect machine failure in anoisy environment. The need to eavesdrop on mechanical sounds within machinery is essential in any maintenance department. Mechanical faults can often be heard. The problem is to locate the sound source quickly and accurately ina generally noisy environment.The electronic stethoscope is a sensitive listening stick, for location of all kinds of machinery noise. Valve chatter, tappetnoise, piston slap, gear and pump noise and the operation of relays and solenoidsare just a few of the many noises that may be traced, amplified and assessed with this device. ELS-12 can also be connected to a tape recorder.

• Temperature range: 0°C to +55°C• Strong housing in black ABS moulding.• Lightweight, with 290 mm measuring probe tip, only 300 grams.• Alkaline 9V battery provides a long operating time, approx

30 hours in normal use.• Includes: headphones and bag• Measuring rod: 60 mm and 290 mm• Dimensions: 205x50x40 mm

10

BETEX®HYDRAULIC PULLERSBETEX HP 2/3-arm pullers, with integrated pump and cylinder

• Multifunctional:These HP-pullers are ideal for pulling a wide variety ofparts, including bearings, bushings, wheels, gears andpulleys. Applications for HP-pullers will be found inmotor repair shops, service companies, maintenanceshops, industry, mining, paper mills, chemical plants,shipping, offshore, etc.

• Compact:The self contained hydraulic pump and cylinder savespace, as you don’t need a separate pump, hose orpuller.

• Strong:The harder the force, the tighter the jaws grip.The arms cannot bend or deflect.

• Economical:2/3-arm combination puller, 2 pullers for the price ofone, including integrated pump and cylinder!

• Safe:The improved integral safety release valve preventsoverloading and ensures that you will never exceed themaximum power capacity.

• Versatile:Various accessories are available. Sets are supplied inpractical PE case and consist of a puller block,connecting rods and a set of bearing splitters.

4, 6, 8, 12, 20 and 30 ton capacity!

Type Art.no. Cap.ton

Max. shaftlength mm

Max. spread mm

Strokemm

WeightKg

HP 43 *HP 63 *HP 83 *HP 123 *HP 203**HP 303 **

791000792000793000794000796000797000

468122030

185215230270360360

275300350375520550

60858585111111

111111142020

4.56.56.58.022.032.0

* Incl. safety net ** incl. safety blanket

BETEX HP 2/3 Hydraulic pullers

Amm

61010102727

Bmm

222525293338

Cmm

325151516060

Dmm

84122122118161155

Emm

424550608068

Fmm

222525284050

Gmm

Compact, ergonomic design, easily operatedby one person!

11

BETEX®HYDRAULIC PULLERSBETEX HSP 2/3-arm pullers, self-centering, with integrated pump and cylinder

• Practical!Self-centering, easy to convert, 2-arm or 3-arm puller.The arms slide inwards or outwards simultaneously.

• Compact!The self contained hydraulic pump and cylinder savespace, as you don’t need a separate pump, hose or puller.

• Strong!The harder the force, the tighter the jaws grip. Thearms cannot bend or deflect.

• Economical!2/3-arm combination puller, 2 pullers for the price ofone, including integrated pump and cylinder!

• Safe!The integral safety release valve prevents overloadingand ensures that you will never exceed the maximumpower capacity.

• Versatile!Various accessories are available. Sets are supplied inpractical PE case and consist of a puller block,connecting rods and a set of bearing splitters.

Advantages of self-centering pullers:• Prevents damage to shaft and workpiece being pulled. • Efficient and saves time. • Can be used in any position.• Adapters included.

4, 6, 8, 12, 20 and 30 ton capacity!

Compact, ergonomic design, easily operatedby one person!

Type Art.no. Cap.ton

Max. shaftlength mm

Max. spread mm

Strokemm

WeightKg

HSP 43* HSP 63* HSP 83* HSP 123*HSP 203**HSP 303**

791500792500793500794500796500797500

468122030

190230280305365465

325380450485570680

60708585111111

131313152020

8.010.012.015.025.036.0

BETEX HSP 2/3 Hydraulic self-centering pullers

Amm

101013

16,52727

Bmm

2222

27,5293338

Cmm

------

Dmm

405070706285

Emm

424550608098

Fmm

222325284050

Gmm


12

BETEX®HYDRAULIC PULLERSBETEX HXP 2/3-arm pullers, self-centering

Safe and easy dismounting of bearings, couplings, rings etc.

Type

HXP 83*HXP 123*HXP 203**HXP 303**HXP 503**

Art.no.

793600794600796600797600799600

Cap. ton

812203050

Max. shaftlength mm

280305365465455

Max. spread mm

450485570680860

StrokemmH E

Pump tip mm

F G A

Jaw tip mm

B C8585111111330

4250608098

2225284050

4070706285

1313152020

1013

16.52727

2227.5293338

WeightKg

9.011.724.0.34.0140.0

BETEX HXP 2/3 Hydraulic self-centering pullers

Separate 2-stage handpump available• Practical!

Self-centering, easy to convert, 2-arm or 3-arm puller. The arms slide inwards or outwards simultaneously.

• Save!Arms can never deflect!

• Economical!2/3-arm combination puller, 2 pullers for the price of one.

• Strong!The greater the pulling force, the tighter the jaws grip!The arms cannot bend or deflect.

Advantages of self-centering pullers:• Prevent damage to shaft and workpiece being pulled.• Work efficient and save time. • Accessory sets are available for the 8 and 12 ton pullers. • Supplied in handy carrying case.

8, 12, 20, 30 and 50 ton capacity!


13

BETEX®MOBILE HYDRAULIC PULLERBETEX HXPC 50 - 2/3 arm puller, self-centering, with crane, 50 ton capacity

Type/art. no HXPC 50/700016 *Capacity in tons 50Max. stroke in mm 159 Max. spread in mm 860 Min. spread in mm 140 Max. shaft length in mm 455 Operating main cylinder electro-hydraulic pump, 230V-16A

50Hz, with remote controlOperating height adjustment electro-hydraulic pump, 230V-16A

50Hz, with remote controlOperating self-centering arms manualAdapters 2 items in mm 1x Ø 40, 1x Ø 50: length 155 Min. height (from the centre) mm 210Max. height (from the centre) mm 1550Manometer 700 barWeight 300 Kg

For dismounting of all kinds of transmissionparts such as bearings, couplings, gears,wheels etc.

• PracticalThe puller is self-centering, easy to maneuver and adjustable in height. Easy to convert to 2-arm or 3-arm puller. The arms slide inwards or outwards simultaneously.

• Fast The complete stroke is 159 mm. Two adapters (extensions)are included for a total length of 310 mm.

• StrongThe harder the force, the tighter the jaws grip. The armscannot bend or deflect.

• SafeThe integral safety release valve prevents overloading andensures that you will never exceed the maximum power capacity.

Advantages • Prevents damage to shaft and object being pulled• One person can do the job * The puller is also available without crane: HXP503

50TONS

• Efficient and saves time• Can be used in any position, horizontal or vertical• Including 2 adapters• Including remote control • Including safety blanket

14

BETEX®

Type

Tri-section set 4tTri-section set 6tTri-section set 8tTri-section set 12t

Art.No.

792160792210792340792495

Cap. Tonnen

46812

Max. shaft length

mm211243243284

Min. spread

mm30505090

Max. spread

mm160210270340

WeightKg

20303468

BETEX Tri-section hydraulic pullers

BETEX TRI-SECTION PULLERS

HYDRAULIC PULLERS

Tri-section pullers• The plates grip behind the inner and outer rings of the bearing,

preventing the pulling force from being transmitted through themoving parts, minimizing the risk of bearing damage.

• The Tri-section Plate's unique design ensures the applicationof force at the most efficient point - the inner ring and outerring together - and thereby requires less force for removal thanrequired if only pulling on the outer ring.

• The firm grip behind a bearing's inner and outer rings ensuresthat the pulling forces are not transmitted through the movingparts, preventing damage to the bearing.

• Most parts are forged SCM440 alloy steel, creating a very safeand durable product.

The puller sets come complete with:• Integrated pump and cylinder • Handle 360° adjustable • Tri-section Plate • Puller block • Connection rods • Steel storage case

4, 6, 8 und 12 tons capacities

15

BETEX®

Type Operations Outputtons

Amm

Bmm

Cmm

Dmm

E Fmm

WeightKg

HPP123Pushing

Outer pullingInner pulling

8128

44-28085-300110-210

270260

130-150

140140

-

2828-

M12-P1.75-

1"-12UNF

30--

19,5

BETEX Push Puller / three-in-one

Push Puller: three-in-one toolThis unique patented design provides end users with athree-in-one tool to easily and safely fit or remove bearingsand sleeves using either their outer or inner edges.The push puller is specially designed for combined pushingand pulling. This creates one tool that uses even force toenable very easy pushing and pulling.The pushing jaw fits on the bearing’s inner ring, preventingthe transmission of forces and/or heat through the outerring to the moving parts, minimizing the risk of bearing damage.

User-Friendly• Unique, patented double-acting pump body to provide

pushing and pulling force.• Unique jaw design for mounting and outer ring pulling

without removing and changing.• Three-jaw structure always provides an even and

constant force, whether mounting, outer ring pullingor inner ring pulling.

• Depends on user requirements - the extension barscan be used where necessary for extra reach.

• Self-centering design of the inner puller always provi-des an even force and prevents jaws sliding off duringoperation.

Safe• The built-in safety valve ensures user safety and

prevents damage to tool and job.• The built-in safety valve prevents the user from being

harmed and the job from being damaged as ratedpressure cannot be reset or adjusted.

• Most parts are forged of SCM440 alloy steel, creatinga very safe and durable product.

Cost-reducing• Built-in safety valve ensures the tool is always operated

as per the rated pressure, significantly extending toollife.

• Three-in-one design reduces preparation, tool-resettime and duration of operation.

• This push puller is ideal for fitting and removing a widevariety of press-fit parts, including bushings, wheels,bearings, gears and pulleys.

Inne

r pul

ling

Out

er p

ullin

gPu

shin

g

HYDRAULIC PULLERSBETEX HPP, selfcentering 3-in-1 PUSH PULLER

16

BETEX®ACCESSORY SETS

Acc. Set HP 43,Acc. Set HP 63, Acc. Set HP 83,Acc. Set HP 123,

791100792100793100794100

46812

250280280325

8.512.512.518.0

Ø 15-110Ø 25-150Ø 40-150Ø 45-225

HSP 43HSP 63,HSP 83,HSP 123,

HXP 83HXP 123, HPP 123

Type Cap. tonArt.no. Min/max Spreadmm

Shaft lengthmm

Weight kg

BETEX BEARING SPLITTERSThis accessory set consists of:1 puller block 2 connecting rods (legs)1 set of bearing splitters for a min./max Ø 15-225 mm

You can use the cylinder from the HP/HSP/HXP series.

ACCESSORY SETS FOR 4, 6, 8, 12 TON PULLERS HP, HSP, HXP, HPP

BETEX®ACCESSORY-SETSBETEX TRI-SECTION PLATES

Use in combination withTri-section 160: HP/HSP 43, 63Tri-section 210: HP/HSP 63, 83Tri-section 340: HP/HSP/HXP 83, 123, 203, HPP 123Tri-section 495: HP/HSP/HXP 203, 303

Tri-section plateThe tri-section plates are specially designed to be used inconjunction with the three-armed pullers. The unique andpatented swivel design creates maximum spread and applies even force at the most efficient point. The platesgrip behind the inner and outer rings of the bearing, preventing the pulling force from being transmitted throughthe moving parts, minimizing the risk of bearing damage.

User-friendly• Unique, patented swivel design creates maximum

spread.• The tri-section construction provides even-force

distribution, preventing bearings from locking and/ortilting on the shaft during removal.

• Suitable for use in conjunction with all three-armedhydraulic pullers.

• Available in a wide range, covering the most commonshaft sizes.

The Tri-section plate series consist of 4 different sizes oftri-section plates that are suitable for shafts of max. Ø ranging from 26 to 495 mm (2" to 19.5").

Typ Art.no. Cap. tonA1 mm A2 mm

SpreadB (mm max)

Cmm

Available shaft diam Dmm

E Fmm

Weight kg

Tri-section 160Tri-section 210Tri-section 340Tri-section 495

265090140

160210340495

216280460660

105115170240

240285430600

5/8”-11UNC-16UNF-14UNF

1”-14UNF

8314561

3.55.516.541

3/4"7/8"

17

791160791210791340791495

682030

18

25OR50TONS

MOBILE HYDRAULIC PULLERBETEX®

19

BETEX MOBIPULLER

Meaning of codes:

25-50 tractive force in tons

430 max. diameter in mm

H manual hydraulic

E electrical hydraulic

V mobile

A remote control

S max. stroke in mm

D double acting

THE BETEX MOBIPULLER is a heavy duty, mobile hydraulic puller.It is used for dismantling bearings, couplings, gears and otherparts, with relative speed and ease. The Mobipuller excels throughfunctional and ergonomic operation. It is stable, mobile and adjustable in height.A maximum tractive force of either 25 or 50 tons can be appliedwith diameters of up to 430 mm.To ensure safe and easy operationthe electrical models are equipped with remote control, safety cageand pressure gauge.

A1: In standard position mm:A2: In extended position mm:B1: Frame length in standard pos. mm:B2: Frame length in extended pos. mm:

Position high / low mm:Dimensions L x W mm:

C: Diameter of jaws mm:D: Set-up height mm:

Adapters mm (155 mm):Weight kg:

Auxiliary tools for dismantling ofinner rings and delicate components.

Remote control

All models areequipped with asafety cage for personal safety

Type

25 HV 430 S 260

25 EVA 430 S 260

50 HV 430 S 260

50 EVA 430 S 260

50 EVA 430 S 340

50 EVAD 430 S 340

50 EVAD 430 S 460

Art.no.

700001

700002

700003

700004

700005

700006

700007

Cap. Ton

25

25

50

50

50

50

50

Stroke cylinder

260

260

260

260

340

340

460

Pump hydraulic manual/electric

manual

single acting electric

manual



double acting electric

double acting electric

In standard position mm

750

750

770

770

690

640

490

In extended position mm

1130

1130

1150

1150

1070

1020

870

7501130121015901100/16501470x1040430900/1430Ø 40,50460

BETEX®

All models are standard equipped witha with oil filled pressure gauge against overload• 4 shaft protectors with an ID of 40 and 50 mm• 4 stable wheels with polyurethane equipped tires, 2 swiveling wheels with double functioning brake• Safety cage• CE-Mark

MOBILE HYDRAULIC PULLER

20

BETEX®MOBILE HYDRAULIC PULLER BETEX HXPM 50 - 2/3 arm puller, self-centering50 ton capacity



• Fast The complete stroke is 330 mm. Four adapters (exten-sions) are included with a maximum length of 620 mm.

• StrongThe harder the force, the tighter the jaws grip. The arms cannot bend or deflect.

• SafeThe integral safety release valve prevents overloadingand ensures that you will never exceed the maximumpower capacity.

Advantages • Prevents damage to shaft and object

being pulled• One person can do the job• Efficient and saves time• Including 4 adapters• Including remote control • Including safety blanket

Detail electric-hydraulic pump

50TONS

21


1. Height adjustment: footpump2. Double-acting handpump for holding, opening and

closing the jaws for safe, secure grip on job3. Electro-hydraulic pump, 230V - 700 bar, operates the

cylinder. This is a 4-stage pump with oil delivery 4.2 liters/minute at 0 bar pressure.

4. Self-centering; The arms slide inwards or outwards simultaneously.

5. The design prevents the puller jaws from slipping ordeflecting

6. Puller can easily be converted from 3- to 2-arm configuration

7. The puller is adjustable 5° vertically8. The cart has two swivel castors (self-locking) and has

two rigid castors9. The hydraulic cylinder is a 2-stage spring-return type

with a max. working pressure of 700 bar (50 ton)10. Four adapters (extensions) with a total length of

620 mm are included

Type / art. no.Capacity in tons

Max. stroke in mm

Max. spread in mm

Min. spread in mm

Max. shaft length in mm

Operating main cylinder

Operating height adjustment

Operating self-centering jaws

Adapters 4 items in mm

Min. height (from the centre) in mm

Max. height (from the centre) in mm

Gauge

Weight in kg

HXPM 50 t / long / 700014 HXPM 50 t / short / 70001750 50

330 330

1250 950

75 75

720 500

electro-hydraulic pump, 230V - 16A, with remote control

foot pump

hand pump, double acting

2 x Ø 40, 2x Ø 50: length 155

820 820

1370 1370

700 bar 700 bar

372 342

22


Adjustable jaw tips forextra grip



• Fast The complete stroke is 270 mm. Four adapters (exten-sions) with a total length of 900 mm are included.

• StrongThe harder the force, the tighter the jaws grip. The arms cannot bend or deflect.

• SafeThe integral safety release valve prevents overloadingand ensures that you will never exceed the maximumpower capacity.

Advantages • Prevents damage to shaft and object being pulled• One person can do the job• Efficient and saves time• Including 4 adapters• Including remote control

100TONS

Detail pneumatic pump

23


1. Pneumatic height adjustment2. Double-acting pump for holding, opening and closing

the jaws for safe, secure grip on job3. Electro-hydraulic pump, 400V - 700 bar, operates the

cylinder. This is a 4-stage pump with oil delivery 10 liters/minute at 0 bar pressure.

4. Self-centering; The arms slide inwards or outwards simultaneously.

5. The design prevents the puller jaws from slipping ordeflecting

6. Puller can easily be converted from 3- to 2-arm configuration

7. The puller is adjustable 5° vertically8. The cart has two swivel castors (self-locking) and has

two rigid castors9. The hydraulic cylinder is a 2-stage spring-return type

with a max. working pressure of 700 bar (100 ton)10. Four adapters (extensions) with a total length of

900 mm are included11. Adjustable jaw tips for optimal/adjustable grip

TIP: use in combination with UHAP2800 highpressure pump.

Type / art. no.Capacity in tons

Max. stroke in mm

Max. spread in mm

Min. spread in mm

Max. shaft length in mm

Operating main cylinder

Operating height adjustment

Operating self-centering jaws

Four adapters (in mm)

Min. height (from the centre) in mm

Max. height (from the centre) in mm

Gauge

Weight in kg

HXPM 100 t / 700015100

270

1500

200

1215

electro-hydraulic pump, 400V - 16A, with remote control

pneumatic/hydraulic pump

pneumatic/hydraulic pump

2 x Ø 70: length 150, 2x Ø 70: length 300

830

1320

700 bar

1120

24

BETEX®MOBILE HYDRAULIC PULLER-INSTALLER BETEX BPP BEARING PULLER PUSHER, MAX 100 T CAP.

INSTALLATION AND REMOVAL OF RAILWAY BEARINGS

Specially for railway and metro workshops. Use the right equipment to remove or install tapered roller bearings. This hydraulic aid will allow you to save valuable time and work safe & efficient.Easy to use roll-around model for both mounting and dismounting.

• Mobile and easy to use by one person • Pulling capacity (dismantling) adjustable to 100 t max.• Pushing capacity (mounting) adjustable to 68t max.• Suitable for locomotives, passenger and freight cars• For safe, simple and fast mounting and dismounting of TBU, SP and

TAROL bearing sets • Wide range of accessories available

The accessory set is available in all sizes, metric and inch versions (housing-type locomotives and passenger cars).

An accessory set consists of:• Pulling shoe• Pulling shoe insert adapter• Guide tube & cap screw assembly• Guide tube adapter• Installing tube adapter ring

Quotation for adapter or different adapter sizes are on request!

25

BETEX®MOBILE HYDRAULIC PULLER/INSTALLER BETEX BPP BEARING PULLER PUSHER, MAX 100 T CAP.

To order the correct accessory set to service bearings (housing-type locomotives and passenger cars), please provide us with the following information:• Bearing number and manufacturer number• Drawing of bearing and shaft (ask for the questionnaire)• Railroad name and location

Step by step dismounting of TBU / SP / TAROL bearing sets

Step by step mounting of TBU / SP / TAROL bearing sets

See our video at our website www.bega.nl

26

BETEX®MECHANICAL PULLERS BETEX MSP 2/3-arm pullers, self-centering

Ergonomic design, easily operated by one person!

• Practical!Self centering 2 or 3-arm puller with self-lockingsystem.Easy to convert and easy to use in every position.

• Safe!The arms adjust themselves simultaneously, eitherinwards or outwards. Self-locking system guaranteesarms neither bend nor deflect.

• Economical!2- or 3-arm combination puller. Two pullers for the priceof one.

• Strong!The harder the force, the tighter the jaws grip. Thearms cannot bend or deflect.

Advantages of self-centering pullers:• Prevent damage to shaft and workpiece being pulled. • Work efficient and save time.

2, 3, 5, 8 and 10 ton capacity!

Safe and easy dismounting of bearings, couplings, rings etc.

Type

MSP 2/3-120MSP 2/3-180MSP 2/3-270MSP 2/3-300MSP 2/3-380

798250798300798350798400798450

235810

80120160210250

120180270300380

86111314

67101410

1515252729

1.62.34.36.19.6

Art.no. Cap. ton Max. shaftlength mm

Max. spread mm

Amm

Bmm

Cmm

WeightKg

BETEX MSP 2/3 Mechanical self-centering pullers

27

BETEX®KEY-DRAWER

For professional removal of keys.The Betex KZZ Key-drawer (Item No. 4900011) is used for the safe removal of keys from the shafts of any type of machine, motor, blower, compressor, etc. For keys from 5 mm to 35 mm in width.

Safe!You no longer need a hammer and chisel.

Advantages• Safe and fast removal. • Perpendicular removal.• No damage to shafts or keys.• Shafts remain straight.• Saves time, labour and costs.• Jaws are made from specially tempered steel.• Screw has left and right trapezium thread.

Easy to use1. Turn wheel (A) to move the jaws (1) up or down

so that they are aligned with housing (2). 2. Turn wheel (B) to fit the size of the key allowing

± 1 mm space.3. Turn wheel (B) hand tight to secure the key with

the jaws. 4. Then turn wheel (A) to extract the key

perpendicularly. 5. Turn wheel (A) to move the jaws down; turn

wheel (B) to open the jaws and free the key.

B 1 1 2 A

Typ

KZZ

Art.no.

4900011

Min. Spread

mm

Max. Spread

mm

WeightKg

5 35 2,2

BETEX KZZ

MECHANICAL PULLERS

28

BETEX®

BETEX 46Simple, handy 2-arm puller for parts gripped externally like pulleys,bearings, rings, etc. Suitable for removing fans from electric motorsDuring operation the arms can not slip because they are pressed against the cross bar.The higher the necessary pulling force, the stronger the arms are pressed against thecross bar. The one-hand operation of the puller permits easy use even under unfavourable conditions. A spring inside the housing guarantees a continual clamping of the forged alloy steel arms.

BETEX 47Patented special 2-arm bearing pullersThis bearing puller is particularly suitable for extracting bearings, bearingrings etc. that fitflushly with other parts. This system is generally applied when dismantling bearings fromanchors, pump shafts etc.

BETEX 48/492/2 bearing splitters and pullersBetex no. 48/49 is designed for dismantling flush-fitting bearings andother parts where an ordinary puller would be unable to get a proper grip. Suitable for various applications.

Type

47-10047-20047-300

Max. diam.mm

4590150

Max. shaftlength mm

65100150

BETEX 47 is available in 3 types

Type

46-20046-00046-01046-020

Max. diam.mm

6075110220

Max. shaftlength mm

4060100200

BETEX 46 is available in 4 types

Type

48-06048-07548-11548-15048-210

Max. diam.mm

6075115150210

Countersupport

standard with extension49-10049-10049-20049-30049-400

Max. shaft length mm

150150200300300

250250300400400

BETEX 48 is available in 5 typesBETEX 49 is available in 4 types

29

BETEX®MECHANICAL PULLERS BETEX 52Patented self-centering 3-arm pullers (mechanical and hydraulic) for diameterØ40 mm till Ø640 mmThe 3 arms of these pullers adjust themselves simultaneously and symmetrically,inwards or outwards. There is no possibility of the arms bending or deflecting.Hydraulic screws with a 20 ton capacity are available for use in combination with thetwo largest pullers. The thread of the screws is in no way affected by the building upof hydraulic pressure, thus keeping wear and tear to the screws down to a minimum.

BETEX 54Patented 2-arm pullers for diameter Ø40 mm till Ø350 mmThis 2-arm puller is extremely well-suited to applications involving the extraction ofbearing-rings, innerrings (NU-NJ). Reversal of the arms makes internal dismantling also possible. The self-locking system guarantees that the arms will not deflect. Extended and extra-extended arms can be supplied for long shafts.

Type Max. diam. mm

Max. shaft length mm

Type Max. diam. mm standard with extension with extra

extension

52-08552-13052-23052-295

52-390/394*52-640/644*

85130230295390640

65105150235270300

54-10054-20054-30054-40054-50054-600

80120160200250350

100125150175200250

200200250250300300

250250300300400400

BETEX 52 with mechanical screw isavailable in 6 types

BETEX 54 with standard arm-lenght is available in 6 typesMaximum shaft length mm

* these types may be converted into hydraulic tools simplyby replacing the mechanical screw and the screw-bushwith a 20 ton mechanical hydraulic screw.

30

BETEX®MECHANICAL PULLERS BETEX 56Internal 4-arm bearing pullers with interchangeable claws (in case)for total 66 bearings till Ø105 mmThis 4-arm bearing puller has been specially developed to extract ball-bearings from casings and shafts using a single action. This concerns the 6000, 6200, 6300 and 6400 series. 66 different ball-bearings can be removed with these three sets of pullers.

BETEX 44Hydraulic 8/15 tons mini-pressWhen using mechanical screws, much of the force is lost as a result of the friction causedby the thread. This minipress administers a shock to the part which is to be extracted. Thisenables optimal use to be made of BETEX pullers 52 and 54, without loss of force or wearand tear to screws. Note*: may be used from 49-200, 52-230 and 54-300 and upwards.* application: heavy duty pullers, BETEX 49-200, 52-230 en 54-300 upwards * height: 35 mm

BETEX 625/630Shaft protector sets for shaft centers and hollow shaftsThese shaft protectors are indispensable between shaft and bearing puller while dismantling bearings, couplings etc. There are two types: 625 for protecting shaft centers and 630 for hollow shafts.Use of shaft protectors prevents distortion to the shaft centers and the screw.

Type

44-08044-150

Capacityton

815

Strokemm

710

Betex 44 is available in 2 types

BETEX 625 consists of a 6-piece set'D' min. = Ø 19 mm 'H' min. = Ø 16 mm'D' max. = Ø 38 mm 'H' max. = Ø 19 mmBETEX 630 'S' consists of a 11-piece set'Db' min. = Ø 19 mm 'Du' min. = Ø 25 mm 'Db' max. = Ø 51 mm 'Du' max. = Ø 64 mmBETEX 630 'T' consists of a 6-piece set'Db' min. = Ø 54 mm 'Du' min. = Ø 67 mm'Db' max. = Ø 76 mm 'Du' max. = Ø 89 mm

'Du'

'Db'

'H'

'D'

Set Max. shaftlength mm

Claws (4 per set)

No of bearings

56-02056-12056-220

Set

56-02056-12056-220

6590150

Ball-bearing6000

6004 t/m 60066007 t/m 6020

6021

3 sets5 sets5 sets

Ball-bearing6200

6200 62056206 62126213 6219

123024

Ball-bearing6300

6300 63026303 63086309 6319

Ball-bearing6400

-6403 64056406 6412

BETEX 56 is available in 3 sets

31

BETEX®MECHANICAL PULLERS

Countersupport type

Suitable forexpanders

Expander For diametermm

For max.depth mm

62-100

62-200

62-200/62-300

62-004➔62-030

62-040➔62-070

62-070➔62-0125

62-00462-00762-01062-01462-02062-03062-04062-05062-06062-07062-08062-010062-0125

4-77-1010-1414-2020-3030-4040-5050-6060-7070-8080-100100-125125-150

35353545509095959595140140140

***********************

****************************************

BETEX 62 is available in 3 setsThe two sets together come in a free carrying case

BETEX 62Internal expander puller up to a bore of Ø 150 mmThis special expander system has been developed to facilitate rapid and effective dismantling under difficult conditions,e.g. in ‘blind holes’. The multiple adjustable jaws (up to 6) ensure the correct grip from behind the bearing, bush etc.Bearings, bushes, sealings etc. are extracted effortlessly.

Smaller, larger and longer sizes are available on request.

= set 1 62-101= set 2 62-201= set 3 62-301= combination set 62-105, including free carrying case

**********

BETEX 62-9 Slide hammer pullerUsed in combination with the internal puller.Slide hammer weight: 0,9 kg2 sizes with strokes of 90 mm and 300 mm2 connecting threads (M10 and M14x1,5) The advantage of the slide hammer is thatit can be used independent of any supporting face. After positioning the internal puller the slide hammer is connected through the hexagon adaptor.We recommend: Up to bore-diameter 39,5 mm Nr. 62-9092Up to bore-diameter 79,5 mm Nr. 62-9302

32

BETEX®MECHANICAL PULLERS BETEX 63, 64 / TRACTA These systems are unique and suitable for difficult dismounting jobs of roller bearings.

Advantages:• For all kinds of roller bearings • Shaft Ø 10,5 mm up to Ø 100 mm, larger sizes on request• Dismounting from house and shaft in one act • Also for flush fit bearings • Unlimited shaft lengths through extensions • 360°C grip over full bearing • Hydraulic type on request • Suitable for serial dismounting• Prevents damage to bearing, bearing house and shaft!

BETEX 63 BETEX 64

Type Shaft diam. mm

Outside diam.mm

Max stroke mm

Max shaft lengthmm

63-10063-20064-40064-50064-60064-70063-800

10,518

30,5466677100

26356075100125140

6264788092120150

95100135150170205240

165180235250270305390

BETEX 63, 64 / TRACTAMax shaft length mm

with extra extension

Larger models on request

33

BETEX®MECHANICAL PULLERS Collets for BETEX 63 and 64

There are 4 different pulling principles that can be applied, depending on bearing type.To define the correct collet the following is mandatory:

Principle 1

Principle 2

Principle 3

Principle 4

Principle 4: grip inside or behind bearing inner ring, or behind bearing outside ring.

Example: cylindrical roller bearing, lowest innerring of the ball bearings,outside ring of the needle roller bearings, spherical roller bearings, NU-,NJ-bearing bushes, ABS-rings, bushes, gear wheels.

Principle 3: grip on bearing inner ring.

Example: tapered roller bearings.

Principle 2: grip on rollers, independent of number of rolls. Also when bearing isflush fit.

Example: wheel bearings, tapered bearings.

Principle 1: grip on inner bearing ring. Bearing is dismantled in one act, from shaftand bearing house.

Example: self aligning ball bearings, four point bearings and ballbearings with split innering.

34

EXPLANATION CYLINDERS

Series Description Type

SSSSLSSCSSHSJLLCJLPCSSA

ALNCACHCDAC

ADAC

General purpose, spring returnLow profile, spring returnCompact, spring returnHollow, spring returnLock nut, load return

Pan lock nut, load returnAluminium, spring return

Aluminium, lock nut, load returnAluminium, hollow, spring return

General purposeAluminium, hollow

Single ActingSingle ActingSingle ActingSingle ActingSingle ActingSingle ActingSingle ActingSingle ActingSingle ActingDouble ActingDouble Acting

Cylinders overview

Capacityton

5-1005-15010-10013-10050-100060-52050-10050-10030-6010-10030-60

Strokemm

25.4-3626-1738-578-15850-30045-5051-25451-25476-153255-33051-254

Page

3132333435363738394041

FEATURES:1. Betex® offers a wide selection of cylinder design,

capacity and stroke to match your daily requirements.2. Built for Rugged Industrial/Construction use. All Betex®

cylinders meet worldwide safety standards.3. Stop rings, plated pistons and heavy duty construction

provide trouble-free operation and long life.4. Heavy duty, wound steel-plated springs provide fast

and complete retraction, cycle after cycle, and retaintheir tension longer. Long-lasting springs contributesubstantially to cylinder life.

5. Threaded collars and internal plunger threads with-stand full loading for maximum flexibility in fixturing.

6. All Betex® cylinders incorporate a positive piston stopto limit piston travel at the end of the stroke, allowingthe cylinder to be operated at full stroke. Piston stopsadd strength and safety to your Betex® cylinder.

7. Rod wiper cleans the rod surface during retraction,protecting the inner cylinder assembly from dirt,moisture and other contaminants.

8. Most Betex® cylinders have a chrome-plated finish toprotect the cylinder from dirt, moisture and othercontaminants for long life.

Stop-rings for piston blow-out protection.

Heavy duty cylinder bodies –precision polished bore minimizes friction & wear.

Hard chrome-plated piston rodsresist scoring & corrosion.

Quality high-flow couplers with dust caps.

Brazing finish on piston rod for sideload protection and long life.

Standard heavy duty, heat treated,grooved load cap.

BETEX®

SSS series

CYLINDERS

Type Capacityton

Strokemm

Oil capcm3

A

Retracted

B

Extended

WeightKg

Dmm

Emm

Fmm

Hmm

Jmm

Kmm

Oø un

Pmm

Umm

Vø

Wun

Xmm

ZmmHeight mm

SSS51SSS53SSS55SSS57SSS59SSS101SSS102SSS104SSS106SSS108SSS1010SSS1012SSS1014SSS151SSS152SSS154SSS156SSS158SSS1510SSS1512SSS1514SSS1516SSS251SSS252SSS254SSS256SSS258SSS2510SSS2512SSS2514SSS308SSS502SSS504SSS506SSS508SSS5010SSS5013SSS756SSS7513SSS1006SSS10010

Model: SSS SeriesCapacity : 5-100 tonStroke : 25,4-362 mmMax. working pressure :10,000 psi / 700 Bar

• All rams are single acting with spring return. Pistons hard chromed.

• Rams inside roll-polished, outside blasted and chromed.

Power sources:Handpumps, Footpumps and air/ hydraulic pumps and electric pumps.Pump and cylinder sets:All cylinders are available as sets (cylinder, gauge, couplers, hose and pump) for your ordering convenience.

5

10

15

25

30

50

75

100

277612718123225.45510515520625730535625.451

101.6152.420325430535640625.550.8102

152.421026131136220951102159203260337156333168260

195490128164408716724632740848456650100199299398498598698824841683385056968651031120092336172311261446185323871619345722283449

11016521627332489121171247298350400451124

149.5200

271.5322373424475523

139.5165

215.5273324375425476

388.5176227288349385463288492357449

137241343454556

114.4176276402504607705807149

200.5301.6423.9525627729831829165

215.8317.5425.4534636736838

597.5227328447552645800444825525709

38

57

70

85

103

127

146

177

30

45

50

65

75

95

115

130

25.4

38

40

55

65

80

95

105

19

19

191919

25.425.425.425.425.4

25

57333333

3530

41

25

-40404040404040

38

50

50

70

70

70

6

-6666666

9.6

10.5

10.5

2

5

2

-16

#10-24un1"-81"-81"-81"-81"-81"-81"-8

1"-8

1 -16

1 -16

-

-

-

3/4" 1/4"

3/8"

1/2"

1/4"

3/4"

5/16"

3/4"

1/2"

1/2"

7/8"3/4"

1/2"

1/2"

5/16"

1414141616616161616161616

25

25

25

-

-

-

25

39

47

58

-

95

--

139

-20un

-18un

-16un

-12un

-

-12un

-

-10un

1 -16

2 -14

2 -16

3 -12

4"-12

5"-12

5 -12

6 -12

28

30

30

50

50

55

45

45

14

12

12

19

-

19

-

25

11.51.92.42.81.82.33.34.45.46.46.88.23.34.15.06.88.29.510.911.812.85.96.48.210

12.214.116.317.718.115

19.123.127.130.437.629.55959

72.6

35

BETEX SSS series, single acting, spring return

BETEX®

36

Model: SLS SeriesCapacity : 5-150 tonStroke : 6-17 mmMax. working pressure : 10,000 psi / 700 Bar

• All rams are single acting with spring return.• Pistons hard chromed.• Rams inside roll-polished.• Rams outside blasted and chromed.

Type Capacityton

Strokemm

Oil capcm3

A

Retracted

B

Extended

WeightKg

Dmm

Eø

mm

Fø

mm

Gø

mm

Hmm

Kmm

Lmm

Mmm

Oø

mm

Pø

mm

Umm

Vø

mmHeight mm

SLS50SLS100SLS200SLS300SLS500SLS750SLS1000SLS1500

51020305075100150

612121316161617

4.518.034.054.0102.0166.0212.0342.0

33425158667985100

395463718295101117

58x4182x55101x76117x95140x114165x140

178x152.5216x190

Cmm

28.536

49.352.366.576.276.2117

3144607390115130160

25.438

50.863.570

82.592115

9.511151619

20.520.520.5

1619191919191923

11122222

2028.5394755697695

2234394455667482

--------

--------

--------

5.57.5101011

13.513.513.5

1.01.43.14.56.811.314.526.3

SLS series

CYLINDERSBETEX SLS series: shorty, flat, compact, spring return

BETEX®

37

BETEX®

Type Capacityton

Strokemm

Oil capcm3

A

Retracted

B

Extended

WeightKg

Dmm

Eø

mm

Fø

mm

Gø

mm

Hmm

Kmm

Lmm

Mmm

Oø

mm

Pø

mm

Umm

Vø

mmHeight mm

SCS101SCS201SCS302SCS502SCS1002

10203050100

3845626057

53.0127.0274.0381.0756.0

8898117122141

126143179182198

7093107125165

Cmm

-----

42607590130

3850657095

-----

1717192331

53321

-----

-----

M4M5M5M5M8

888810

2639393955

-----

4.15.06.810.922.7

SCS series

CYLINDERSBETEX SCS series, shorty, flat, compact, spring return

Model: SCS SeriesCapacity : 10-100 tonStroke : 38-62 mmMax. working pressure :10,000 psi / 700 Bar


38

BETEX®

Model: SHS SeriesCapacity : 12-100 tonStroke : 8-158 mmMax. working pressure : 10,000 psi / 700 Bar


Type Capacityton

Strokemm

Oil capcm3

A

Retracted

B

Extended

WeightKg

Eø

mm

Fø

mm

Hmm

Jmm

Kmm

Oø

un

Pmm

Umm

Vø

unc

Wø

un

Xmm

Yø

mm

ZmmHeight mm

SHS120SHS121SHS123SHS202SHS206SHS302SHS306SHS603SHS606SHS1003

121212202030306060100

842765215268.51587615383

1896175230671435100593218761774

60121180162310182332

247.5326.5254

68163256214462

250.5490

323.5479.5337

54.154.154.175759090125125165

Dø

mm353535

54.954.965659090125

737373100100114114

158.6158.6213

11.5191919192325323238

---

545463638989125

---991010

12.512.512

-16--

1 -161 -161 -161 -162 -162 -164"-12

16161619192222222228

50.8-

50.882.682.69292130130178

-18--18-16-16-16-16-12-12-11

2 -162 -162 -163 -123 -124 -124 -126 -126 -128 -12

30303038384242505060

19.519.519.527273636545479

9-

12.79.49.41414141419

1.53

4.27.513.511

20.426.434

50.1

SHS series Centre Hole ø

3/4"

9/16"9/16"7/8"7/8"3/4"3/4"

5/16"

5/16"3/8"3/8"3/8"3/8"1/2"1/2"5/8"

3/4"3/4"3/4"7/8"7/8"1/2"1/2"1/4"1/4"3/8"

CYLINDERSBETEX SHS series, center hole cylinders, spring return

39

LOCK NUT CYLINDERSBETEX JLLC series, single acting, loadreturn

Type Capacityton

Strokemm

Oil capcm3

Fmm

Hmm

Jmm

A

Retr.

B

Ext.

Smm

J1 mm K1 mm

Dø

mm

Eø

mm

WeightKg

JLLC502JLLC506JLLC5010JLLC1002JLLC1006JLLC10010JLLC1502JLLC1506JLLC15012JLLC2002JLLC2006JLLC20012JLLC3002JLLC3006JLLC30012JLLC4002JLLC4006JLLC400112JLLC5002JLLC5006JLLC50012JLLC6002JLLC6006JLLC60012JLLC8002JLLC8006JLLC80012JLLC10002JLLC10006JLLC100012

505050100100100150150150200200200300300300400400400500500500600600600800800800100010001000

50150250501502505015030050150300501503005015030050150300501503005015030050150300

354.51063.51772.5

66519953325100530156030134540358070

2167.56502.51300527558265165303532.510597.521195427412823256465970179103582072572177243544

Tr80x4Tr80x4Tr80x4Tr110x6Tr110x6Tr110x6Tr140x6Tr140x6Tr140x6Tr170x6Tr170x6Tr170x6Tr210x6Tr210x6Tr210x6Tr250x6Tr250x6Tr250x6Tr280x6Tr280x6Tr280x6Tr300x6Tr300x6Tr300x6Tr360x6Tr360x6Tr360x6Tr400x6Tr400x6Tr400x6

202020323232494949525252626262767676818181898989105105105108108108

707070707070125125125125125125155155155155155155175175175195195195225225225245245245

164264364187287387209309459243343493295395545335435585375475625395495645455555705495595745

21441461423743763725945975929349379334554584538558588542562592544564594550570510055457451045

353535454545454545505050606060707070808080858585100100100110110110

707070707070125125125125125125195195195225225225240240240275275275315315315355355355

242424242424202020202020757575858585909090959595120120120135135135

125125125165165165205205205235235235305305305355355355395395395425425425505505505555555555

959595130130130160160160185185185235235235265265265300300300330330330390390390430430430

152535304864537811783117170173233323250327441367466617446562737709870111094911411430

TypeTSA-100TSA-100TSA-100TSA-100TSA-100TSA-100TSA-200TSA-200TSA-200TSA-200TSA-200TSA-200TSA-300TSA-300TSA-300TSA-400TSA-400TSA-400TSA-500TSA-500TSA-500ATS-600ATS-600ATS-600ATS-800ATS-800ATS-800ATS-1000ATS-1000ATS-1000

JLLC series

Optional Tilt Saddle

TSA-Optional Tilt Saddle

Model JLLC300-1000T

Model JLLC50-200T

BETEX®

Lock NutCapacity : 50-1000 tonStroke : 50-300 mmMax. working pressure : 10,000 psi / 700 bar

Model: JLLC series• Single-acting, load return• Safety locknut for mechanical load holding• Chrome plated to prevent corrosion and to lower friction

for smoother operation• Withstands side-load forces up to 5% of rated cylinder

capacity without scoring• Stop ring for piston blow-out protection• Interchangeable, hardened, grooved saddle as standard• High flow coupler and dust cap included on all models

Height mm

40

Model: JLPC series• Extremely low height for use in confined areas• Single-acting, load return• Locknut for positive and safe load holding over a long

period of time • Chrome plated to prevent corrosion and to lower

friction for smoother operation• Withstands side-load forces up to 3% of rated cylinder

capacity without scoring• Overflow port functions as a stroke limiter• High flow coupler and dust cap included on all models

LOCK NUT CYLINDERSBETEX JLPC series, single acting, load return

Type Capacityton

Strokemm

WeightKg

Oil capcm3

A

Retr.JLPC602JLPC1002JLPC1502JLPC2002JLPC2502JLPC4002JLPC5002

60100150200250400500

50504545454545

1526445774134189

433715963

1273.5171025743179

125137148155159178192

JLPC series

Capacity : 60-500 tonStroke : 45-50 mmMax. working pressure : 10,000 psi / 700 bar

B

Ext.175187193200204223237

Dmm

140175220245275350400

Eø

mm105135165190215270300

Fø

mmTr105x4Tr135x6Tr165x6Tr190x6Tr215x6Tr270x6Tr300x6

Hmm

20212730323948

Jø

mm96126150180200250285

Kmm

68910111110

Rmm

5˚5˚5˚5˚5˚5˚5˚

Smm

28314043445562

BETEX®

Height mm

Model: SSA series• 8 standard models available for 50 to 100 tons.• Up to 60% lighter than steel cylinders.• Heavy-duty spring for easy and full retraction.• Large saddle surface for angle load protection.• High-flow quality couplers.• All models are provided with carrying handles.• Rod wiper protects inner rod from dirt.• Hard-anodized housing and piston reduce wear and

corrosion.Custom stroke lengths and capacities are available.

Capacity : 50-100 tonStroke : 50-250 mmMax. working pressure : 10,000 psi / 700 bar

Type Capacityton

Strokemm

Oil capcm3

A

Retracted

B

Extended

WeightKg

Cø

mm

Dø

mm

Eø

mm

Fø

mm

Gø

mm

Kmm

Umm

Vmm

Zmm

SSA502SSA504SSA506SSA5010SSA1002SSA1004SSA1006SSA10010

50505050100100100100

5010015025050100150250

35470810621770663132619893315

165215265365165215265365

215315415615215315415615

95959595130130130130

140140140140203203203203

80808080110110110110

6060606090909090

38.138.138.138.138.138.138.138.1

33333333

110110110110160160160160

M6x1.0M6x1.0M6x1.0M6x1.0M6x1.0M6x1.0M6x1.0M6x1.0

66666666

67.78.216.418.220.522.730.9

SSA series

ALUMINIUM CYLINDERSBETEX SSA series, aluminium cylinders, spring return

41

Height mm

BETEX®

Model: ALNC series• Half the weight of steel cylinders• Locknuts offer extended load holding• Large bearing surfaces for side load protection• Carrying handles standard on all models• Hard-anodized coating reduces wear & corrosion• Stop rings for piston blow-out protection• Heavy duty spring for fast & full return

42

ALUMINIUM CYLINDERSBETEX ALNC series, load return, lock nut type

Load Return, Lock nut typeCapacity : 50-100 tonStroke : 50-250 mmMax. working pressure : 10,000 psi / 700 bar

Model ALNC cilinders 50-100T

BETEX®

Cilindermodel/

capacity ton

Boltcircle U mm

ThreadV

mm

Thread DeptX

mmALNC-50ALNC-100

110170

M6 x 1.0M6 x 1.0

1010

Base Plate Mounting holes dimensions (mm)

Type Capacityton

Strokemm

WeightKg

Oil capcm3

A

Retr.

B

Ext.

Dmm

Eø

mm

Fø

mm

Hmm

Jø

mm

Kmm

Smm

ALNC502ALNC504ALNC506ALNC5010ALNC1002ALNC1004ALNC1006ALNC10010

50505050100100100100

5010015025050100150250

1012.714.518.220.525

29.137.3

354.5709

1063.51772.5663.51327

1990.53317.5

206257308409213264315416

257359461663264366468670

135135135135198198198198

95959595130130130130

Tr80x4Tr80x4Tr80x4Tr80x4Tr105x6Tr105x6Tr105x6Tr105x6

3838383838383838

6060606090909090

33333333

3636363643434343

ALNC series

Height mm

MODEL:ALNC50-100T

U

V

H

A

B

S

K

E F J

Z

3/8"-NPT

��

D

6

Model: ACHC series• Half the weight of steel cylinders• Heavy duty spring for fast & full return• Chrome plated centre hole for extra protection • Large bearing surfaces for side load protection• Carrying handles standard on all models• Hard-anodized coating reduces wear & corrosion• Stop rings for piston blow-out protection• Rod wiper protects inner cylinder from dirt

43

ALUMINIUM CYLINDERSBETEX ACHC series, spring return, hollow

Type Capacityton

Strokemm

WeightKg

Oil capcm3

A

Retracted

B

Extended

Dø

mmHeight mm

ACHC302ACHC306ACHC602ACHC606

30306060

5015050150

1014

19.525

3627286841377

177305177305

227455227455

135135198198

Eø

mm9090125125

Fø

mm65659090

Hmm

35353535

Jø

mm63638989

Kmm

11.511.51414

Lmm

36365454

ACHC series

Cilindermodel/

capacity ton

Boltcircle U mm

ThreadV

mm

Thread DeptZ

mmACHC-30ACHC-60

110160

M6 x 1.0M6 x 1.0

1010


Spring Return, Hollow typeCapacity : 30 & 60 tonStroke : 50-150 mmMax. working pressure : 10,000 psi / 700 bar

Model ACHC 30-60T

BETEX®

Model: DAC series, double actingCapacity : 10-100 tonStroke : 153 - 460 mmMax. working pressure : 10,000 psi / 700 bar

• Perfect for construction, shipyards, utilities, mining andequipment maintenance.

• Hard chromed piston.• Ram inside roll-polished.• Ram outside blasted and chromed.

Type Capacityton

Push Pull

Strokemm

Oil capcm3

Push Pull

A

Retracted

B

Extended

WeightKg

Eø

mm

Fø

mm

Hmm

Imm

Jø

mm

Kmm

Oø

un

Pmm

Umm

Vmm

Zmm

Wø

un

XmmHeight mm

DAC1010DAC1012DAC2512DAC308DAC3014DAC506DAC5013DAC 5018DAC756DAC7513DAC1006DAC10013

10102530305050507575100100

4.54.513151528282835354545

255305305204356153356460153356153356

405485150090115721084233932801589342720304380

160190720440760320680167350510909452040

408458470

386.5551.5336511658353524359526

663763775

590.5907.54898411118506854512856

4545567575959595115115130130

Dø

mm353550555580808095959595

7878101103103127127127146146177177

363636363630303030303838

575726808076767675757171

505050505070707070707070

66101010333331010

1"-81"-8

1 -161 -161 -161"-121"-121"-121"-121"-12

1 -121 -12

2020253030

25.425.425.438383535

----------

139139

-----------10-10

----------

25.425.4

2 -14 2 -14 4"-124"-12 4"-12 5"-12 5"-125"-12

5 -12 5 -126 -12 6 -12

272740505050505050505050

131529202929436540585983

DAC series

1/2"

1/2"

1/2"

3/4"3/4"

3/4"3/4"

1/4"1/4"

3/4"3/4"7/8"7/8"

CYLINDERSBETEX DAC series, double acting

44

BETEX®

Model: ADAC series• Half the weight of steel cylinders • Steel piston for protection against load damage• Chrome plated centre hole for extra protection • Carrying handles standard on all models• Hard-anodized coating reduces wear & corrosion• Stop rings for piston blow-out protection• Rod wiper protects inner cylinder from dirt

45

ALUMINIUM CYLINDERSBETEX ADAC series, double acting, hollow

Type Capacityton

Strokemm

Capacityton

Push

CapacitytonPull

Oil capcm3

Push

Oil capcm3Pull

ADAC302ADAC306ADAC3010ADAC602ADAC606ADAC6010

303030606060

5015025050150250

333333626262

212121414141

2387151192447.513422237

152456

760.52958861477

ADAC series

WeightKg

9.31316

15.523

30.5

Cilindermodel/

capacity ton

Boltcircle U mm

ThreadV

mm

Thread DeptZ

mmADAC-30ADAC-60

110160

M6 x 1.0M6 x 1.0

1010


Double acting, hollowCapacity : 30-60 tonStroke : 50-250 mmMax. working pressure : 10,000 psi / 700 bar

177305430177305430

227455680227455680

135135135198198198

909090125125125

656565909090

353535353535

454545454545

636363898989

11.511.511.5141414

363636545454

A

Retr.

B

Ext.

Dø

mm

Eø

mm

Fø

mm

Hmm

Imm

Jø

mm

Kmm

Yø

mm

BETEX®

Height mm

Model ADAC cilinders 30-60T

46

BETEX®HEAVY-DUTY HAND PUMPSBETEX PB/HC series, steel hand pumps, heavy duty, 700 bar

Type

1st stage 2nd stage

Amm

Bmm

Cmm

Dmm

Emm

Oil portthread

F

WeightKg

Pressure rating(bar)

Oil volumeper stroke cm3

Usable oil capacity

cm3PB350PB600PB700

HC1500HC2000

13,813,813,813,813,8

700700700700700

35060070015002000

13,013,013,013,013,0

2,82,82,82,82,8

335543632633580

303480541551523

909090106140

146146146200189

128142128142148

5,57,67,311,211,5

2nd stage1st stage

PH/HC series

Model: PB series• Betex heavy duty hand pumps feature a forged

construction.• The drop-forged base and rugged welded construction

effectively prevents collision damage and deformation.• The professional choice for a wide range of industrial

applications.• Internal overload valve prevents pump from being used

beyond its rated capacity.• Two-speed pumps provide rapid pumping to load the

cylinder quickly.• External adjustable relief valve with locking mecha-

nism.• Carrying handles for easy portability.

Also available as a HANDPUMPSET, this includes:• T-adaptor• gauge• hose, 1,8 meter• couplers• steel storage case

-NPT3/8"-NPT3/8"-NPT3/8"-NPT3/8"-NPT3/8"

Handpumpset PB 700

47

BETEX®HEAVY-DUTY ALUMINIUM HAND PUMPS BETEX AHP series, aluminium hand pumps

Model: AHP series• Our hand pumps are always characterized by their

rugged construction and easy-operation handles.• Aluminium alloy construction and handy release

knobs with locking mechanism are perfect forindustrial applications and daily operations.

• Special lightweight design with aluminium alloyconstruction makes for an easily portable andmobile unit.

• Specially designed AHP703D is for double-actingcylinders without the need for extra controllingvalve and adapters.

Also available as a HANDPUMPSET, this includes:• T-adaptor• gauge• hose, 1,8 meter• couplers• steel storage case

Type Usable oilcapacity

cm3Oil volume per

stroke cm31st stage 2nd stage

WeightKg

Bmm

Cmm

Dmm

Emm

Fmm

Gmm

Hmm

I

AHP701AHP702AHP703AHP703D

350100020002000

12.912.912.912.9

12.32.32.3

361513556556

Amm

110110150150

391542623623

7777102102

140130135135

127127135135

42.542.550

24/37

37---

-NPT-NPT-NPT-NPT

2.33.56

7.0

AHP series


1st stage 2nd stage13.813.813.813.8

700700700700

3/8"3/8"3/8"3/8"

Handpumpset AHP 702

48

HEAVY-DUTY ALUMINIUM HAND PUMPS BETEX HP35 series, steel hand pumps, heavy duty, 700 bar

Model: HP seriesMax. working pressure : 10,000 psi / 700 bar.Large 3/8” pressure port for maximum flow.Low Handle effort for easy operation.Two speed models.

Model HP35

Model HP35D (double acting)

BETEX®

Model: HP series• Our hand pumps are always characterized by their

rugged construction and easy-operation handles.• Aluminium alloy construction and handy release

knobs with locking mechanism are perfect for industrial applications and daily operations.

• Special lightweight design with aluminium alloy construction makes for an easily portable and mobile unit.

• Specially designed HP35D is for double-acting cylinders without the need for extra controlling valveand adapters.


cm3Oil volume per


WeightKg

Bmm

Cmm

Dmm

Emm

Fmm

Gmm

Hmm

I

HP35HP35D

35003500

4040

33

586663

Amm

146146

629706

79.779.7

79.779.7

79.779.7

22.3536

4545

-NPT-NPT

16.516.8

HP series


1st stage 2nd stage2828

700700

3/8"3/8"

HEAVY-DUTY HAND PUMPSBETEX HP80 series, steel hand pumps, heavy duty, 700 bar

HP series

Model: HP series hand pumps• Rugged construction made of steel• Automatic 10,000 psi overload-relief valve protects

components in hydraulic systems and ensures safeoperation

• New inlet/outlet design features slow deflation functionreducing noise, and allows multidirectional operation

• Two-speed pumps provide rapid pumping to load thecylinder quickly

• Specially designed HP80D is for double-acting cylinders without the need for extra controlling valveand adapters

BETEX®

I

A

D

3/8"-NPT

G

15°

BC

EF

HJ

49


cm3Oil volume per


HP80HP80D

80008000

113113

44

Amm

700700

Bmm

300300

Cmm

312312

Dmm

420420

Emm

275275

Fmm

208.5216.5

Gmm

315.5338.5

Hmm

Imm

99

Jmm

1414

WeightKg

2424


1st stage 2nd stage27.527.5

700700

-NPT3/8"-NPT3/8"

HEAVY-DUTY HAND PUMPSBETEX HP160 series, steel hand pumps, heavy duty, 700 bar

HP series

Model: HP series hand pumps• Rugged construction made of steel• Automatic 10,000 psi overload-relief valve protects


• New inlet/outlet design features slow deflation functionreducing noise, and allows multidirectional operation

• Two-speed pumps provide rapid pumping to load thecylinder quickly

• Specially designed HP160D is for double-acting cylinders without the need for extra controlling valveand adapters

BETEX®

I

A

D

3/8"-NPT

G

15°

BC

EF

HJ

50


cm3Oil volume per


HP160HP160D

1600016000

113113

44

Amm

700700

Bmm

300300

Cmm

400400

Dmm

420420

Emm

275275

Fmm

242242

Gmm

310310

Hmm

Imm

99

Jmm

1414

WeightKg

3536



700700

-NPT3/8"-NPT3/8"

51

BETEX®HEAVY-DUTY FOOT PUMPSBETEX FHB series, foot pumps


cm3Oil volume per


Output flow rate(cc)

Unload Load

WeightKg

Bmm

Cmm

Dmm

Emm

Aircons.

F

FHB350FHB600FHB700

350700700

13.013.013

2.82.82.8

174174174

Amm

192192192

474660708

171717

461647695

---

---

---

-NPT-NPT-NPT

8.510.811.1

FHB series


1st stage 2nd stage13.813.813.8

700700700

3/8"3/8"3/8"

Model: FHB series• Betex® innovative foot pumps are not only attractively

designed, but are also durable and stable• Foot-operated pump and release pedal, providing

accurate control for operating in different conditions• Single & double acting forged metal versions available• Spring-loaded foot pedal is convenient and easy to

operate• Internal overload valve prevents pump from being used

beyond its rated capacity

Max. working pressure: 10,000 psi / 700 bar.Large⅜" pressure port for maximum flow. Low pedal effort for easy operation. Single & double acting models.Metal pump.

AIR PUMPSBETEX AP921 series, air-hydraulic foot pumps, 700 bar

Model: AP series, air-hydraulic pump • The air-driven hydraulic pump is designed for use with single-

acting cyinders and tools like the Betex cylinder serie• Rugged construction: most components are made of aluminium

alloy and are built for long service life, easy operation and portability

• Automatic 10,000 psi overload-relief valve protects componentsin hydraulic systems and ensures safe operation

• New inlet/outlet design features slow deflation function reducingnoise, and allows multidirectional operation

BETEX®

52

AP921

AP series


cm3Oil volume per


WeightKg

Bmm

Cmm

Dmm

Emm

F Gmm

AP921 750 530 130 170

Amm

89442 - - 3-8 bar 179 5.4

max.Pressure

(bar)700

AIR PUMPS

Modell: AP series, air-hydraulic pump• The air-driven hydraulic pump is designed for use with

single-acting cylinders and tools like the Betex cylinderserie

• Rugged construction: most components are made of aluminium alloy and are built for long service life, easy operation and portability

• Automatic 10,000 psi overload-relief valve protects com-ponents in hydraulic systems and ensures safe operation

• New inlet/outlet design features slow deflation function reducing noise, and allows multidirectional operation

• The AP1600D + AP3000D-models are specially designedfor double-acting cylinders without the need of anadditional control valve and connecting pieces

BETEX®

��

��

��

��

��

��

��

Air Hydraulic PumpModel:AP1600SRated Pressure:10000 psiOil Capacity:1600 c.c.

AP1600S

53

AP1600S

AP3000D

AP3000S

AP1600D

AP series


cm3Oil volume per


WeightKg

Bmm

Cmm

Dmm

Emm

F Gmm

AP1600SAP1600DAP3000SAP3000D

1600160030003000

1250125012501250

193193193193

128128160160

Amm

90909090

242242305305

258258325325

154154152152

3-8 bar3-8 bar3-8 bar3-8 bar

205205205205

7.58.310

10.3

max.Pressure

(bar)700700700700

BETEX AP1600/3000 series, air-hydraulic foot pumps, 700 bar

AIR PUMPSBETEX AP8000 series, air-hydraulic foot pumps, 700 bar

BETEX®

54

BETEX AP series, air pump• Two speed operation for fast speed cylinder advance• 8 Liter durable aluminium reservoir • Air motor capable of starting under full load• Automatic 10,000 psi overload-relief valve protects


• Specially designed AP8000D is for double-acting cylinders without the need for extra controlling valve and adapters

E

B CF

H

A

D

AP series


cm3Oil volume per


WeightKg

Bmm

Cmm

Dmm

Emm

F Gmm

AP8000SAP8000D

80008000

47004700

280280

312312

Amm

312312

505505

142142

251251

3-8 bar3-8 bar

--

2020

max.Pressure

(bar)700700

ELECTRIC PUMPSBETEX EP18 series, electric pumps, 8L, 700 bar

BETEX®

55

MODEL:EP18D

EP series

Type max.Pressure

(bar)

Usable oilcapacity

350 bar 700 bar0 bar 70 bar

WeightKg

Bmm

Cmm

Dmm

Emm

Fmm

Gmm

EP18SEP18D

700700

8L8L

0.330.33

0.260.26

4.24.2

3.13.1

142142

Amm

312312

505505

251251

395395

312312

149.5149.5

3131

Acting

singledouble

EP18D

EP18D

Model: EP18 series electric pumps• Electric pump 1/2 HP 230V 50/60 Hz universal

induction motor, thermal protected• Low motor RPM and very quiet (about 80dBA at 700

Bar)• Two speed operation• 24V remote control incl cord (3m)• Internal overload valve prevents pump from being

used beyond its rated capacity• Automatic 10,000 psi overload-relief valve protects


• Specially designed EP18D is for double-acting cylinders without the need for extra controlling valveand adapters

• Meets CE requirements

5,00

4,00

3,50

3,00

2,00

1,50

1,00

0,50

0,10

0,05

Ölv

olum

en (

Lite

r /M

in.)

70 140

210

280

350

420

490

560

630

700

Druck (Bar)

Oil volume (Liter/Min.)

Type Valve Funktion MotorEP18S single

EP18D double

2 pos./2-way3 pos./4-way

advance/ return/hold

0.37kW, 220V,50/60Hz,

single phase

EP18S, EP18D

ELEKTRISCHE PUMPENBETEX EP211 series, electric pumps, 11L, 700 bar

BETEX®

56

D

C

G

F

B

E

A

EP series

EP211D

Modell: EP211 series electric pumps• Electric pump 1/2 HP 230V 50/60 Hz universal

induction motor, thermal protected• Low motor RPM and very quiet (about 80dBA at 700

Bar)• Two speed operation• 24V remote control incl cord (3m)• Internal overload valve prevents pump from being

used beyond its rated capacity• Automatic 10,000 psi overload-relief valve protects


• Specially designed EP211D is for double-acting cylinders without the need for extra controlling valveand adapters

• Meets CE requirements

9,0

8,0

7,0

6,0

5,0

4,0

3,0

2,0

1,0

0,0

Ölv

olum

en (

Lite

r /M

in.)

70 140

210

280

350

420

490

560

630

700

Druck (Bar)

EP211D

Type max.Pressure

(bar)

Usable oilcapacity

350 bar 700 bar0 bar 70 bar

WeightKg

Bmm

Cmm

Dmm

Emm

Fmm

Gmm

EP211SEP211D

700700

11L11L

0.840.84

0.650.65

8.28.2

7.47.4

170170

Amm

229229

555555

180180

480480

350350

300300

3737

Acting

singledoublet

Oil volume (Liter/Min.)

Type Valve Funktion MotorEP211S single

EP211D double

2 pos./2-way3 pos./4-way

advance/ return/hold

1.12kW, 220V,50/60Hz,

single phase

EP211S, EP211D

Model: AHP/UHP serie• AHP704: high working pressure up to 1000 / 1500 bar• UHP2800 light weight model for ultra high working

pressure of 2800 bar for special applications• Automatic overload-relief valve protects components

in hydraulic systems and ensures safe operation

Also available as HANDPUMPSETS, which are supplied complete with:• T-adaptor• gauge• hose, 1,8 meter• couplers• storage case

57

Type Usableoil cap.

cm3Oil volume per


WeightKg

Bmm

Cmm

Dmm

Emm

Fmm

Gmm

Hmm

I

AHP704AHP705UHP2800

100027001000

12.96.512.9

1.651

0.65

501629488

Amm

11015080

539699620

77102140

145152108

127157157

42.55026

373737

-16UNF- NPT-16UNF

3.56.75.3

AHP/UHP series



100015002800

3/4"

3/8"

3/4"

BETEX AHP/UHP series, ultra high pressure aluminium hand pumps: 1000 / 1500 / 2800 bar

HEAVY-DUTY ALUMINIUM HIGH PRESSURE HAND PUMPSBETEX®

UHP2800

AHP704

AHP705

Handpumpset UHP 2800

58

BETEX UHAP series, ultra high pressure aluminium air pumps, 2800 Bar

HIGH PRESSURE AIR PUMPSBETEX®

UHAP series

Type Art.no. Oil capacity Max. capacity WeightKg

AIR PUMP UHAP 2800AIR PUMP UHAP 2800 ULTRA

0,43 Liter p/Min, at 7 air pressure0,75 Liter p/Min, at 7 air pressure

2932

Capacity

2800 Bar2800 Bar

72928037292802

3 Liter3 Liter

Model: UHAP2800Capaciteit: 2800 BarOlie capaciteit: 5 litermax. cap.: 0,43 liter p/min,

by 7 Bar air pressure

Model: UHAP2800 ULTRACapaciteit: 2800 BarOlie capaciteit: 3 litermax. cap.: 0,75 liter p/min,

by 7 Bar air pressure

Both pumps are inclusive:• Gauge ( 0-3000 Bar scale)• HD Hose (3 Mtr incl. extra couplerset)• Couplers 1/4"

59

Type

Rubber

End one End two Lenght(mm)

ID(mm)

HS332HS333HS335HS336HS338HS3310HS3312HS3315HS3320HFHS332-BGHFHS333-BGHFHS335-BGHFHS336-BGHFHS338-BGHFHS3310-BGHFHS3312-BGHFHS3315-BGHFHS3320-BGPolyurethane PHS332PHS333PHS336PHS3310PHS3315PHS3320HPHS332HPHS333HPHS336HPHS3310HPHS3315HPHS3320CouplersCP330BCP331BCP332BCP430CP431CP432

60090015001800240030003600450060006009001500180024003000360045006000

6001000180030004500600060010001800300045006000

6,46,46,46,46,46,46,46,46,49,4 high flow9,4 high flow9,4 high flow 9,4 high flow9,4 high flow9,4 high flow9,4 high flow9,4 high flow9,4 high flow

9,79,79,79,79,79,79,7 high flow9,7 high flow9,7 high flow9,7 high flow9,7 high flow9,7 high flow

NPTNPTNPTNPTNPTNPTNPTNPTNPTNPTNPTNPTNPTNPTNPTNPTNPTNPT

NPTNPTNPTNPTNPTNPT

3/8"3/8"3/8"

3/8"

NPTNPTNPTNPTNPTNPTNPTNPTNPTNPTNPTNPTNPTNPTNPTNPTNPTNPT

NPTNPTNPTNPTNPTNPT

3/8"3/8"3/8"

3/8"

3/8"3/8"3/8"3/8"

3/8"3/8"3/8"3/8"3/8"3/8"

3/8"3/8"3/8"3/8"

3/8"3/8"

3/8"

3/8"

3/8"3/8"3/8"3/8"3/8"

3/8"3/8"3/8"3/8"3/8"

3/8"3/8"3/8"3/8"

3/8" 3/8"

3/8"

3/8" 3/8"

3/8"

3/8"3/8"3/8"

3/8"

ACCESSORIES Max. Working Pressure -700 bar/10,000 psiBETEX®With this simple yet complete line of accessories consisting of hydraulic hoses, couplings, manifolds, pressure gauges, Betex has the right accessory for a se-cure and optimally functioning system

COUPLER SETS• BETEX supplies a variety of screw-set quick couplers

in four different sizes. These can also be used withexisting hydraulic systems.

• All couplers are rated to 700 bar, and have an anti-leakmechanism that works in either low- and/or high-pres-sure conditions.

HS 332

HFHS 332

CP330B CP331B CP332B

Quick koppelingsetCoupler set female Coupler set male Quick connection coupler setQuick connection coupler femaleQuick connection coupler male

Type Description Dimensionsmm

M0031BLiquid-filled, dampens needle

vibration.Calibrated to read in bar, psi.

Dial – 2½"; Accuracy, meets DIN Standard

±1.6% of full scaleThread: NPT

M0040All functions similar to M0031B

except the dial 100 mm

1/4"

MANOMETER

NPTNPTNPTNPTNPTNPT

NPTNPTNPTNPTNPTNPT

3/8"3/8"3/8"3/8"3/8"3/8"

3/8"3/8"3/8"

3/8"

NPTNPTNPTNPTNPTNPT

NPTNPTNPTNPTNPTNPT

3/8"3/8"3/8"3/8"3/8"3/8"

3/8"3/8"3/8"3/8"

3/8" 3/8"

HOSES• Heavy-duty hoses rated at 700 bar, meet IJ-100

specifications• Hoses are black rubber coated with two layers of steel

braided reinforcement, I/D of 1/4''.• Flexible hoses with spring guards at both ends to

protect the adapters. Available to special lengths uponrequest.

60

ACCESSORIES Max. Working Pressure -700 bar/10,000 psi

Typ Description Dimensionsmm

ADL101 Elbow

BETEX MAINTENANCE PRODUCTS - Canstar Instruments · 2019. 11. 29. · ANNO 1978 Dear reader, We are...

Documents

Transcript of BETEX MAINTENANCE PRODUCTS - Canstar Instruments · 2019. 11. 29. · ANNO 1978 Dear reader, We are...