BestalMetal Catalogue 2013

5/21/2018 BestalMetal Catalogue 2013

1/28


2/28

Corporate Prole ............................................................................................................ 1

Expanded Metals

Introduction ............................................................................................................ 2

Commercial Applications ............................................................................................................ 4

Specication ............................................................................................................ 6

Walkway Meshes Load / Span Table ............................................................................................................ 7

Walkway Meshes Installation Method ............................................................................................................ 8

Expanded Metals ............................................................................................................ 9

Micromeshes ............................................................................................................ 11

Facade Meshes ............................................................................................................ 12

High Security Fencing Meshes ............................................................................................................ 14

Razor Meshes & Perimeter Fencing ............................................................................................................ 15

Perforated Metals ............................................................................................................ 16

High Ribbed Formwork ............................................................................................................ 18

Ribbed - Lathing

Metal - Lathing

Angle Beads

Plasterstop Beads ............................................................................................................ 19

Stripmesh

Frame Tie

Steel Lintels ............................................................................................................ 20

U-Channel Lintel- Loading Table ............................................................................................................ 21

PVC Beads ............................................................................................................ 22

PVC Mini Angle Bead

PVC Angle Bead (Round Nose)

PVC Corner Ruler

PVC Inner Corner Bead PVC Plasterstop Bead

PVC Architrave Bead

PVC Beads ............................................................................................................ 23

PVC Groove Joint

PVC Tile Trim

PVC Tile Trim (Flat)

PVC Z-Bead

PVC Drip Groove ............................................................................................................ 24

PVC Movement Joint

PVC Expansion Joint PVC L-Strip

PVC Step-Grip

PVC Corner Chamfer

CONTENTS


3/28

Bestal is one of the leading Expanded Metal manufacturer and supplier in Singapore established

since 1993 with more than 20 years of industrial experience. Projects supplied include HDB multi-storey carparks, skybridges, walkways, green walls, feature walls, security fencings, ceilings and

facades, etc.

Bestal has developed a wide range of aluminium expanded metal to meet the growing demand for

building facade applications. We have advanced technology machines that enable us to produce

cost eective and high quality products.

Bestal has a wide range of paerns of Perforated Metal to satisfy customers needs.

We also supply stainless steel, aluminium, steel plates that comply to international standards and

will continue to provide the best service and quality to our customers.

Bestal is also well known for its architectural nishing products such as High Ribbed Formwork,

Ribbed-Lath, Plaster Beads & Laths, Steel Lintels and PVC Beads for masonry, plastering etc.

Our Vision

To be a leading expanded metal manufacturer and supplier recognized for its cost eectiveness, reli-

ability, eciency and commitment to quality

Our Mission

To achieve growth through excellent customer satisfaction.

CORPORATE PROFILE

1


4/28

BESTAL EXPANDED METALS

2

Expanded metals is produced from one continuous sheet of metal by

expansion process i.e. slit and stretched to form uniform diamond-paerned meshes. This unique process results in double bonds formation

where the rows of strands converge at the apex of each diamond, technically

called knuckles.

1. Steel: Manufactured using high quality, low carbon steel complying to JIS G3131 (BS 1449) SPHC.

Normally hot-dipped galvanised (to BS 729:1971) for anti-corrosion.2. Stainless Steel: Manufactured using SS304/316 grade for highly corrosive environment applications.

3. Aluminium: Manufactured using high quality commercial grade aluminium sheets (Grade AA1100-H14) 99%

pure aluminium.

4. Powder-coated: All expanded steel meshes can be powder-coated for decorative and chemical resistant

applications. A wide range of colour selection is avaliable upon request.

1. Conventional mesh in which the strands are

inclined from the plane of the steel sheet.

2. Flaened mesh in which the strands are in the

same plane as metal sheet by press-rolled.

Conventional / Flaened

Meshes

MATERIALS TYPE

Before rolling Aer rolling

BMM 3035

BFM 2015 BMM 3035

BWK 50080BWK 50075 BBM 3032

BMM 3035F


5/28


Expanded metals is specied rst with SWM (Short Way of Mesh) followed

by LWM (Long Way of Mesh). Generally the thickness of metal and thestrand width.

Note: The LWM can be precise whilst the SWM dimension and strand width is approximate

subject to some tolerance. (10 percent) due to manufacturing constraints.

EXPANDED METALS AND ITS PROPERTIES

PRODUCT SPECIFICATION

The unique feature of expanded metals is that the mesh is formed from the

same piece of metal. The knuckles where the strand joints create some

inherent properties of expanded metals:

1. The intact knuckles provides structural support for loading, suitable

for withstanding stress and support weight beer than joining or

welding process. As there are no joints or welds, it distributes loads

evenly over wider area.

2. The open mesh design allows passage of light, air and sound; used for

screenmesh, ventilation and security screen in many industrial

buildings.

3. Lighter in weight yet stronger than steel sheet, thus economical

applications for walkway platform, security fencing, machine

guards, racking, etc.

4. Expanded mesh does not fray or unravel when cut or le unframed;

ensures high degree of security and protection for security prisons,

military installation, bank vaults and high-security fencing.

5. The anti-skid surface provides safety and grip suitable for

stairtreads, rugged maintenance oor, gratings and catwalks for

factories, shipyards and oil reneries.

SWM - Short Way of MeshLWM - Long Way of Mesh

SWO - Short Way of OpeningLWO - Long Way of Opening

S : SWM - Length of SWML : LWM - Length of LWM

BWK 50075 BWK 50105

BWK 50080

3

overallthickness

overallthickness

SWO

SWOSWM

SWM

LWO

LWO

LWM

LWM

str

and

thic

kness

strandwidth

strandthickness

strandwidth


6/28

COMMERCIAL APPLICATIONS

Expanded metals is used in virtually all sectors of the industry - buildings, engineering works, oil reneries,

shipyards, process industries and many others. Expanded metals can be functionally or decoratively in applications.

Commercial applications include walkway, screening, safety guards, security installations, decorative racks, suspended

ceiling, pedestrian barrier, grilles, balustrades, fencing, greenwall, facade, etc.

4


Walkway

Drain Grating

HDB Carpark

Green Wall

Catwalk

M & E Catwalk

Facade


7/28

5


Railing

Decorative Ceiling

Security Wall

Green Wall

Green Wall

Facade Safety Barricades

Screening

Safety Fencing


8/28

Category Mesh Material Mesh Opening Thickness Strand Weight Standard Sheet

Reference Type SWM x LWM (mm) (mm) +/-10% LWM x SWM (mm) x (mm) (+/-10%) (+/-10%) (kg/m2) (mm) x (mm)

Fine BFM0816 Steel 8 x 16 2.0 2.8 11.00 1220 x 2440Meshes BFM1015 Steel / (GI) 9 x 29 1.0 1.5 2.69 1220 x 2440 BFM2015 Steel 9 x 29 2.0 1.5 5.50 1220 x 2440 BFM1020 Steel 16 x 38 1.0 2.0 2.00 1220 x 2440 BFM1520 Steel 16 x 38 1.5 2.0 3.15 1220 x 2440 BFM1638 Steel 16 x 38 2.0 4.0 7.85 1220 x 2440 BFM1528 Steel 22 x 57 1.5 2.8 3.06 1220 x 2440 BFM2028 Steel 22 x 57 2.0 2.8 3.90 1220 x 2440 BFM2550 Steel 25 x 50 2.0 3.5 4.40 1220 x 2440 BFM52100 Steel 52 x 100 2.0 4.5 2.80 1220 x 2440

Medium BMM1230 Steel 12 x 30 3.0 3.0 11.80 1220 x 2440Meshes BMM1538 Steel 15 x 38 3.0 5.0 15.70 1220 x 2440 BMM3035 Steel 22 x 57 3.0 3.5 7.30 1220 x 2440 BMM3045 Steel 35 x 76 3.0 4.5 6.60 1220 x 2440 BMM3060 Steel 42 x 115 3.0 6.0 8.00 1220 x 2440 BMM3050 Steel 50 x 152 3.0 5.0 4.71 1220 x 2440 BMM5050 Steel 50 x 152 5.0 5.0 7.05 1220 x 2440 BMM3075 Steel 75 x 200 3.0 7.5 5.20 1220 x 2440

Ballustrade BBM3032 Steel 25 x 40/81 3.0 3.2 6.05 1220 x 2440Meshes BBM3032A Aluminium 25 x 40/81 3.0 3.2 2.09 1220 x 2440 BBM3033 Steel 30 x 50/110 3.0 3.3 5.90 1220 x 2440

Louvre BLM0876 Steel 8 x 76 1.6 4.0 12.50 1220 x 2440Meshes BLM1024 Steel 10 x 24 2.0 4.0 12.50 1220 x 2440 BLM1345 Steel 13.65 x 45 2.0 5.0 11.50 1220 x 2440 BLM1063 Steel 16 x 76 1.0 6.3 7.49 1220 x 2440 BLM1563 Steel / (GI) 16 x 76 1.5 6.3 10.40 1220 x 2440 BLM2063 Steel 16 x 76 2.0 6.3 12.40 1220 x 2440 BLM2040 Steel 16 x 76 2.0 4.0 7.88 1220 x 2440

Experf Mesh BEM1302F Steel 5 x 6 0.7 1.2 2.60 1220 x 2440

Walkway BWK30080 Steel 30 x 75 3.0 8.0 12.50 1220 x 2440

Meshes BWK45050 Steel 34 x 76 4.5 5.0 11.00 1220 x 2440 BWK50075 Steel 30 x 75 5.0 7.5 23.00 1220 x 2440 BWK50080 Steel 42 x 135 5.0 8.0 14.05 1220 x 2440 BWK50105 Steel 30 x 75 5.0 10.5 27.00 1220 x 2440 BWK50110 Steel 45 x 135 5.0 11.0 19.00 1220 x 2440

XG XG-11 Steel 34 x 135.4 4.5 7.0 14.50 1220 x 2440 XG-12 Steel 34 x 135.4 6.0 7.0 19.40 1220 x 2440 XG-13 Steel 34 x 135.4 6.0 9.0 24.90 1220 x 2440 XG-14 Steel 34 x 135.4 8.0 9.0 33.20 1220 x 2440 XG-21 Steel 36 x 101.6 4.5 7.0 13.70 1220 x 2440 XG-22 Steel 36 x 101.6 6.0 7.0 18.30 1220 x 2440 XG-23 Steel 36 x 101.6 6.0 9.0 23.60 1220 x 2440

XG-24 Steel 36 x 101.6 8.0 9.0 31.40 1220 x 2440

SPECIFICATION


Specication normally refers to steel but can be manufactured in aluminium and stainless steel. Sheet tolerance: SWM + /- 50mm SWO+5mm Notation: LWM= Long Way of Mesh A=Aluminium *LWM+/-10mm LWO+/-0mm SWM=Short Way of Mesh F=Flaened SWO= Short Way Opening LWO= Long Way Opening

6


9/28

Walkway Types of Simple Span (mm) Double Span (mm) Triple Span (mm) Mesh Loads 600 900 1200 300 450 600 200 300 400 Reference

Uniform Load 5.70 2.50 1.50 23.50 10.70 6.00 51.00 25.00 14.00BWK 50075 (KN/m2)BWK50110A Point Load 1.30 0.80 0.60 2.80 1.90 1.40 4.40 3.00 2.20 (KN)

Uniform Load 8.20 3.65 2.02 33.80 15.30 8.66 70.00 36.10 20.50BWK 50105 (KN/m2)BWK 60075A Point Load 1.80 1.22 0.92 4.20 2.80 2.12 6.40 4.56 3.45 (KN)

Uniform Load 4.80 2.20 1.20 20.00 9.00 5.10 43.00 21.00 12.00BWK 50080 (KN/m2)BWK 50075A Point Load 1.10 0.74 0.54 2.50 1.68 1.27 4.00 2.68 2.04 (KN)

Uniform Load 6.30 2.90 1.70 26.00 11.70 6.70 55.00 28.20 16.00 (KN/m2)BWK 50110 Point Load 1.44 0.96 0.70 3.30 2.20 1.68 5.00 3.56 2.70 (KN)

BWK 30080 Uniform Load 7.25 2.61 1.82 19.13 8.50 4.78BWK 45050 (KN/m2) Not Recommended Point Load 1.32 0.53 0.44 1.43 0.96 0.72 (KN)

Walkway Types of Simple Span (mm) Double Span (mm) Triple Span (mm) Mesh Loads 600 900 1200 300 450 600 200 300 400 Reference

Uniform Load 4.90 2.25 1.22 20.00 9.00 5.21 43.85 21.40 12.14XG 11 (KN/m2)XG 21 Point Load 1.10 0.74 0.54 2.50 1.68 1.27 4.00 2.68 2.04

(KN)

Uniform Load 6.43 2.90 1.73 26.37 11.93 6.83 56.00 28.75 16.12XG 12 (KN/m2)XG 22 Point Load 1.44 0.96 0.72 3.30 2.22 1.68 5.06 3.56 2.70 (KN)

Uniform Load 5.80 2.50 1.50 23.80 10.70 6.10 51.00 25.40 14.60XG 13 (KN/m2)XG 23 Point Load 1.30 0.85 0.64 2.95 1.97 1.50 4.55 3.18 2.42 (KN)

Uniform Load 8.20 3.65 2.02 33.80 15.30 8.66 70.00 36.10 20.50XG 14 (KN/m2)

XG 24 Point Load 1.80 1.22 0.92 4.20 2.80 2.12 6.40 4.56 3.45 (KN)

Uniform Load 7.25 2.61 1.82 19.13 8.50 4.78XG 63 (KN/m2) Not Recommended Point Load 1.32 0.53 0.44 1.43 0.96 0.72 (KN)

STEEL WALKWAY MESHES : LOAD/SPAN TABLE

FIXING AND INSTALLATION : WALKWAY MESHES


When xing the side of Expanded Metal and welded in situ to the steel beam or shape supporting structure, weld the side as shown.

But according to application conditions, welding spots may be every 2 meshes or 4 meshes. However, it is recommended for safety

to weld every mesh for such applications where tracs are busy or where are likely subject to heavy shocks and vibrations.

NOTE:1) The load table is applicable based on

spanning in LWM direction and spot-weldat every 4 strand on support and minimum25mm landing on both ends.

2) Spanning recommended based onassumption that deection is not greaterthan span /200.

3) Spanning stated in table are nominal.Clear spans are obtained by deducting25mm landing on both ends.

Simple Span

Double Span

Triple Span

7


10/28

(a) Direction Arrangement:

Arrange direction of long way of mesh (LWM) to conform to span direction. (Refer to Fig. 1 & Fig. 2)

(b) Welding:

Distribution of load produced in the mesh by working load on expanded metal is considered to be shown in

Fig. 2. Therefore, for joining two sheets together there are 2 standard methods as below;

(b-1) Sheet joined by bu welding (see Fig. 3)

(b-2) Sheet joined by overlapping and welding for at least one mesh (see Fig. 4)

(b-3) When joining (walkway grating type) in SWM (Short way of mesh) direction, arrange meshes to be in a

straight line and direction of angle each strand to be in same way.

Fig.1: Arrange direction for Gratings

Fig.3: Sheet joined by bu weld Fig.4: Sheet joined by overlap andweld

It provides super grip and is slip resistant. Commonly used in oily, icy or wet environments

* Available upon request on Serrated expanded metal (SXG - 11/12/13/14)

Fig.2: Arrange direction for Gratings


INSTALLATION METHOD

BESTAL SERRATED EXPANDED METAL (SXG SERIES)

Supporting frame

Welding

Supporting frame

To be a straight

Joined partby buweld

Joined part by overlap and weld

Continuous Angle

Continuous Clamp

Continuous Stripor Special WasherBestal

WalkwayMeshes Bestal

WalkwayMeshes

Bolt, Every 2 meshes or 4 meshes

Bolt, Every 2 meshes or 4 meshes

INSTALLATION METHOD USING BOLT

8

NOTE: It is advisable to consult bolt specialist for recommendation.


11/28



All meshes available in aluminium (A), stainless steel (SS), galvanized steel (GS), steel (S), titanium (T), copper (CU) and others.

0510SS

0816GS

0816SS

1020GS

0816A

1038S

1676S

1676A

9


12/28


All meshes available in aluminium (A), stainless steel (SS), galvanized steel (GS), steel (S), titanium (T), copper (CU) and others.

0306

0929

1230

1020F

1345A

2550A

2257

1302F


10


13/28

Selvage Edge (Fig.1) Solid Intersperse (Fig.2) Solid Intersperse (Fig.3)

MEM 0102(Actual)

MEM 0408(Actual)

MEM 0612(Actual)

MEM 0305(Actual)

MEM 0510(Actual)

MEM 0820(Actual)

11

Bestal is one of the company that has the most advanced state-of-the-art fullycomputerized machinery that is able to produce super thin micromesh to meetthe demands of industry. Super thin micromesh is used for manufacturing hightech products such as tennis rackets, badminton rackets, golf clubs, shoe soles,baeries and computers etc, where high precision is required.

It is also commonly used as screens for insects, such as termites, ants, mosqui-toes, drainages and all kinds of ltrations.Materials are available in steel, stainless steel, aluminium, lead, zinc, copper,silver, titanium and paper.

WING TYPE

BESTAL MICROMESH : SPECIFICATION

We also develop the wing

type expanded metal. The

wing type is of no meshes

on wings. Please refer gure

1-3 for wing type products,

as shown in picture selvage

edge and solid intersperse.

Micro meshes are reduced

version of expanded met-

als, manufactured under

the same process using ne

metal blanks (aluminium,

stainless, galvanised sheet,

titanium etc). It inherits all

the properties of expanded

metals but is used for light

industries. Commercial us-

age includes screen, para-

bolic mesh, speaker grilles,

air & oil lters, decorative

screen and many others.

BESTAL SUPER THIN MICROMESH : SPECIFICATION

Super Thin Mesh Size Thickness Strand Coil Size

Micromesh SWM x LWM (mm) (mm) LWM x SWM

Reference (mm) (mm) (+/-10%) (+/-10%) (mm) (mm)

STM 0052 0.5 1.0 0.03-0.3 0.1-0.5 305 Max. x Coil

STM 0102 1.0 2.0 0.03-0.4 0.1-0.8 305 Max. x Coil

STM 0203 2.0 3.0 0.03-0.6 0.1-1.0 1000 Max. x Coil

STM 0204 2.0 4.0 0.03-0.7 0.1-1.2 1220 Max. x Coil

STM 1535 1.5 3.5 0.03-0.5 0.1-0.8 1000 Max. x Coil

Micro Mesh Mesh Size Thickness Strand

Reference SWD x LWD (mm) (mm)

(mm) (mm) (+/-10%) (+/-10%)

MEM 0102 1 0.3 - 0.4 0.3 - 0.4

MEM 0203 2 0.3 - 0.6 0.4 - 0.6

MEM 0305 3 0.4 - 0.6 0.4 - 0.8

MEM 0408 4 0.4 - 0.8 0.6 - 1.2

MEM 0510 5 0.4 - 0.8 0.6 - 1.8

MEM 0610 6 0.4 - 0.8 0.6 - 1.8

MEM 0612 6 0.4 - 1.0 0.6 - 1.8

MEM 0714 7 0.4 - 1.0 0.6 - 2.0

MEM 0820 8 0.4 - 1.0 0.6 - 1.8

Actual Meshes Size

BESTAL MICROMESHES

BESTAL SUPER THIN MICROMESH

2

3

5

8

10

10

12

14

20


14/28

BESTAL EXPANDED METAL FOR FACADE

Bestal Aluminium Expanded Metal Facade mesh provide a modern unique appealing architectural look for commercial

& residential buildings such as condominium, factories, etcIt is economical and easy to install.

BESTAL ALUMINIUM FACADE MESH : SPECIFICATION

Mesh Ref. Material Mesh Opening Thickness Strand Weight Standard Sheet

SWM x LWM (mm) (mm) Kg/m2 LWM x SWM

(mm) (mm) (+/-10%) (+/-10%) (+/-10%) (mm) (mm)

BAF42115 Alum 42 x 115 1.5 16 3.10 1220 x 2440

BAF45135 Alum 45 x 135 2.0 16 3.80 1220 x 2440

BAF86200 Alum 86 x 200 2.0 30 3.80 1220 x 2440

BAF70150 Alum 70 x 150 3.0 30 7.00 1220 x 2440

BAF50152 Alum 50 x 152 3.0 17 5.50 1220 x 2440

Note : 1. Customised sizes are available upon request subject to production feasibility 2. Material available : Steel, Hot-dipped galvanised , GI and Stainless Steel 3. Anodizing are also available eg. Aluminium natural colour, bronze colour, gold colour etc.

BESTAL FACADE MESHES

12


15/28

13

BESTAL FACADE MESHES


16/28

BESTAL HIGH SECURITY FENCING

Bestal High Security fencing mesh are commonly used for areas designated for high performances security fence eg.

Prison, military camps, hyro-dams, nuclear power plants, embassies, airports, oil reneries & others like anti-terrordeterrent facilities.

It can be manufactured using mild steel with hot-dipped galvanising and or stainless steel.

BESTAL SECURITY FENCING MESH : SPECIFICATION

Mesh Ref. Material Thickness Strand Standard Sheet

(mm) (mm)

(+/-10%) (+/-10%) LWM x SWM

(mm) (mm)

BSM3030 S Steel 12.5 x 75 3.0 3.0 1220 x 2440

BSM3030 L Steel 12.5 x 160 3.0 3.0 1220 x 2440

BBM3032 Steel 25 x 40/81 3.0 3.2 1220 x 2440

Note : 1. Customised sizes are available upon request subject to production feasibility 2. Material also available in Stainless Steel 304 or 316 3. Hot-dipped galvanised

Specication normally refers to steel but can be manufactured in aluminium and stainless steel.

Sheet tolerance: SWM +/-50mm SWO+5mm Notation: LWM = Long Way of Mesh A = Aluminium

* LWM+/-10mm LWO+/-0mm SWM = Short Way of Mesh F = Flaened

SWO = Short Way Opening

LWO = Long Way Opening

BSM 3030 S

BSM 3030 L

BBM 3032

14

Mesh Opening

(Norminal)

SWM x LWM

(mm) (mm)

BESTAL HIGH SECURITY FENCING


17/28

BESTAL RAZOR MESHESBESTAL PERIMETER FENCING

15

BESTAL RAZOR MESHES

BESTAL PERIMETER FENCING :SPECIFICATION

Bestal Razor Mesh normally be installed on top of the fencing mesh for high security reason.

It is eective and the best choice of security.

BESTAL RAZOR MESH SPECIFICATION

Mesh Ref. Material Mesh Opening Thickness Strand Standard Sheet

SWM x LWM (mm) (mm) LWM x SWM

(mm) (mm) (+/-10%) (+/-10%) (mm) x (mm)

BRM95200 Steel 95 x 200 3.0 3.0 1220 x 2440

Barb Thickness : 0.5mm

Note : 1. Customised sizes are available upon request subject to production feasibility 2. Material also available in Stainless Steel 304 or 316

Category Mesh Ref Wire Opening Wire Diameter Standard Sheet

(mm) x (mm) (mm) (mm) x (mm)

(+/-10%)

Welded BPF1275 12.5 x 75 4 1200 x 2400

Meshes 1800 x 2400

(Hot Dip

Galvanised) BPF2575 25 x 75 4 1200 x 2400

1800 x 2400

BPF50150 50 x 150 5 1200 x 2400

1800 x 2400

Note: Customised sizes are available upon request subject to production feasibility

Bestal Razor Mesh


18/28

BESTAL PERFORATED METALS

42.13% open

2.5 x 4P35.4% open

5 x 8P35.4% open

8 x 13P37.9% open

33.33% open

3 x 6P22.6% open

5 x 8P39% open

7 x 10P44.4% open

20.43% open

3 x 5P32.6% open

6 x 9P40.2% open

3.5 x 5P44.4% open

33.33% open

4 x 7P29.6% open

7 x 10P49% open

8.2 x 13P36% open

1

5

9

13

3

7

11

15

2

6

10

14

4

8

12

1616


19/28

17

We are one of the specialized manufacturers in Perforated Metals. The products can be used everywhere from daily life to heavy industry. It cansuit the chemical industry, ltering, ventilating and paper industry.

Material: Mild Steel, Stainless Steel, Aluminium, Copper, Galvanized, etc.Size: 3 x 6, 4 x 8 or 5 x 10 etc.

We also can provide the customer with special size.Specication: The hole size, pitch, in addition to the shown sheet can vary depending on customers need.

8 x 12P40.2% open

6x20.236 x .787-37.2% open

10 x 15P40.2% open

15 x 20P50.9% open

4x20.157 x .787-41.2% open

2.5x20.098 x .787-23.6% open17

21

19

3.5x21.137 x .827-48% open

24

18

22

20

Percentage

Open Area &Hole NosCalculation

Arrangement= 90o Arrangement= 60o

12.5 x 14.5 - 60% open25 26

46.8% open23

43.9% open27 43.29% open28Bar Centers

Centers

Centers

Diameter60

o

Diameter

% Open Area = 78.54 ( )2dp % Open Area = 90.69 ( )2d

p

Hole Number = 5.4 x 25.4p2

Hole Number = 2 x 25.4 x 25.41.732 x p2

BESTAL PERFORATED METALS

(P) (P)

(P)

(d)

(d)


20/28

Bestal metal formwork (BMF) is designed to replace the tedious conventionalconstruction joints and used as permanent formwork for construction joints or concretestop ends. Bestal metal formwork or commonly referred to as High-Ribbed mesh bybuilding contractors can save contractors time and money. Made from galvanised sheet,its unique design incorporates mesh with roll-formed V-ribbed helps retain concrete grout

Bestal ribbed-lath is expanded metal-lath stiened with longitudinal ribs. The fuming de-sign of the mesh provides ecient background plaster, partitioning, structural encasement,suspended ceiling, arch formation, construction joints for shallow slabs, retroing works, etc.

Bestal expanded lath is commonly used for providing key for plaster and render work. Commercial applicationsinclude partitioning, suspended ceiling and structural encasement for reproong incorporating venmiculite plaster.The jointless and continuity of expanded metal-lath is used as background plaster to reinforce against plaster cracks;and relieving stress at joints of dissimilar material.

BESTAL FORMWORKS FOR CONSTRUCTION JOINTS

BESTAL RIBBED-LATHING

BESTAL METAL-LATHING

Product Thickness(mm) Weight Sheet Size Material Reference (10%) Kg/m2(10%) (mm x mm)

BMF 28G 0.25 1.96 450 x 2100 Galvanised

Product Thickness Weight Sheet Size Material Reference (mm) (10%) Kg/m2(10%) (mm x mm)

SRL29G 0.3 1.30 610 x 2000 Galvanised

Product Thickness Weight Sheet Size Reference (mm) (10%) Kg/m2(10%) (mm x mm)

BML 26G 0.40 1.00 2440 x 1220

BML 24G 0.60 1.61 2440 x 1220

BML 22G 0.80 1.84 2440 x 1220

RecommendedApplications

Background plaster, landscape,

junction between dissimilarmaterialsPartitioning, 2-hour reproong, suspended ceiling.

Partitioning, 4-hour reproong, suspended ceiling.

90 mm 90 mm 90 mm 90 mm 90 mm

BESTAL FORMWORKS, LATHS

18

Bestal angle bead protects plaster from chipping at vulnerable corners of plastered walls and columns. It also helps toprovide a straight arris for beer nishing. The expanded wings provide a good anchorage for most types of plaster use.

Minimesh angle bead (MAB) is the miniature version of angle bead for thin-coat plaster of 3-6mm render. It givesprotection at exterior corner of plasterboard in partition works

BESTAL ANGLE BEADS

Product Reference Packing/Carton

AB 010 50 pcs x 2440mm MAB 010 (minimesh) x 2700mm x 3000mm

AB010MAB010


21/28

BESTAL METAL BEADS,STRIPMESH & FRAME TIES

19

Product Mesh Opening Width x Length Material Strips/Bundle Reference

SDM065 65mm x 1220mm Galvanised 100 SDM100 100mm x1220mm Galvanised 100 SDM150 16mm x 38mm 150mm x 1220mm Galvanised 100 SDM200 200mm x 1200mm Galvanised 100 SDM300 300mm x 1220mm Galvanised 100

Bestal stripmesh is used to prevent plaster crack along line of stressbetween brick/concrete walls. It also acts as reinforcement for block orbrick walls. When embedded in cement mortar at every fourth joints, itforms an integral structure to absorb stress and vibration in building

Bestal stop bead comes with L-ange casing to give an idea nish line to plasterwork. It oers protection for any stopends, abutments and door jambs and skirting.

Both angle beads and plasterstop beads are available in stainless steel for highly corrosive environment

BESTAL PLASTERSTOP BEADS

BESTAL STRIPMESH

Products Reference Packing/Carton

PS 013 (13mm plaster) 50 pcs x 2440mm PS 019 (19mm plaster) 50 pcs x2700mm

50 pcs x3000mm

Bestal Frame Tie BFT 0504 and Bestal Brick Tie BBT 28A acts as reinforcement for brick and block walls when embeddedin cement mortar at every fourth course(ie 400mm 450mm brick/block height interval).

BESTAL FRAME TIE BFT 0504 / BESTAL BRICK TIE BBT 28A

Bestal Frame Tie BFT0504Packing: 500 pcs per box

Bestal Brick Tie BBT28APacking: 500 pcs per box

Note: Bestal metal beads / laths / steel lintels are manufactured using low carbon zinc coated steel sheets complying to BS EN 10142:1991(equivalent to BS 6542:1984)


22/28

20

Bestal Steel Lintels is used to replace conventional casting of concrete lintels over door openings.

Bestal light weight lintels are manufactured using steel of galvanised coating type Z275 for anti-corrosion. It complieswith the requirements and conforms to BS5950

BESTAL STEEL LINTELS

Lintel Reference BSL153A BSL153B BSL153C BSL153D

Height (mm) 50 50 50 75

Thickness (mm)+/-10% 2.0 2.5 3.2 3.2

Internal Width (mm) 153 153 153 153

Lintel Reference BSL203A BSL2033B BSL203C BSL203D

Height (mm) 50 50 50 75

Thickness (mm)+/-10% 2.0 2.5 3.2 3.2

Internal Width (mm) 203 203 203 203

Lintel Reference BIL70 BIL100 BSL103 BSL103A BSL103B BSL103C BSL103D

Height (mm) 25 25 50 71 71 71 100

Thickness (mm)+/-10% 1.0 1.0 1.6 1.6 2.0 2.5 2.5

Internal Width (mm) 70 100 103 103 103 103 103

BSL 103

BSL 153B

BSL 203A

BSL 153C

BSL 203B

BSL 153D

BSL 203C

BIL 70 / BIL 100 BSL 103B BSL 103D


w = 153(internal width)

w=1

03

(inter

nalw

idth)

w=1

03

(inter

nalw

idth)

w=1

03

(inter

nalw

idth)

t=2.5

t=2.0

t=1.6

h=100

h=71

h=50

h=50

h=50

h=50

h=50

t = 3.2t = 2.5t = 2.0

h=50

h=75

t = 3.2t = 3.2t = 2.5







23/28

19

*All material thickness subject to 10% tolerance

Note: It is advisable to consult bolt and anchor specialist for recommendation.

LINTEL BRACKET

Bracket Reference

LB 100

Metal expansion anchors (quantity - diameter [mm])

Maximum Load

(KN) / bracket

4.50 7.20

2 No. - 8/10 4 No. - 8/10

Suitable for lintels

BIL 100 - BSL 103A, B, C, D

LB100

BESTAL U-CHANNEL LINTEL - LOADING TABLE GUIDE

Maximum Height of 100mm thick Brickwall above lintel (m)

Opening

Width

(m)

BSL103 BSL103A BSL103B BSL103C BSL103D

0.80

0.90

1.00

1.10

1.20

1.30

1.40

1.50

1.601.70

1.80

1.90

2.00

2.10

2.20

2.30

2.40

2.50

2.60

2.70

2.80

2.90

3.003.10

3.20

3.30

3.40

3.50

1.16

0.95

0.76

0.60

0.48

0.39

0.32

0.26

0.220.18

0.16

2.25

1.85

1.56

1.33

1.14

1.02

0.84

0.70

0.590.50

0.42

2.93

2.42

2.03

1.73

1.49

1.30

1.09

0.91

0.770.65

0.55

0.48

0.41

0.36

0.32

0.28

0.25

0.22

3.53

2.92

2.45

2.09

1.80

1.57

1.32

1.10

0.920.78

0.67

0.58

0.50

0.44

0.38

0.34

0.30

0.27

0.24

0.21

0.19

0.17

0.150.14

0.13

0.12

0.11

0.10

6.70

5.54

4.65

3.96

3.42

2.97

2.61

2.31

2.061.85

1.67

1.48

1.28

1.12

0.99

0.87

0.77

0.69

0.62

0.55

0.50

0.45

0.410.37

0.34

0.31

0.28

0.26

Thickness 2mm

Note:

* Bestal U-Channel Lintels are designedto BS 5950

* End bearing 100mm (minimum) to150mm

* Highly recommended to lay rst courseof bricks and set for one day beforecontinuing subsequent bricklaying tominimise deection.

* We reserve the right to changespecication without prior notice.

21



24/28

Bestal has been manufacturing beads proles for plastering and masonry for past 20 years. They are highly suitable for

nishing o-angle, archways, inside or outside corners. Bestal oers a new comprehensive range of high quality PVCdrywall corner trim system for every job to assist those making material selection.

Reference Packing/box ColourMAB-1D 2.2m x 100pcs White

MAB-2D 2.2m x 100pcs White

MAB-3D 2.2m x 100pcs White

MAB-1/2/3D 2.2m x 100pcs Grey

Reference: Packing/box Colour

BCR-4D 2.5m x 100pcs White/Grey

BCR-6D 2.5m x 100pcs White/Grey


BIC-7W 2.0m x 100pcs White

2.2m x 100pcs White

3.0m x 100pcs White

Reference Packing/box ColourBRN-5D 2.5m x 100pcs White/Grey

BRN-7D 2.5m x 100pcs White/Grey

Reference G D B Packing/box Colour

BPS-10D 10 10 30 2.2m x 100pcs White

BPS-12D 15 12 33 2.2m x 100pcs White

Reference G D B Packing/box Colour

BA- 6D 6 6 22 2.2m x 100pcs White

BF-10D 10 10 30 2.2m x 100pcs White

All product specication are subject to tolerance (10 percent), thus design may vary without prior notice.

BESTAL PVC BEADS

BESTAL HIGH QUALITY PVC PRODUCTS FOR DRY-LINING

BESTAL PVC MINI ANGLE BEAD

BESTAL PVC CORNER RULER

BESTAL PVC PLASTERSTOP BEAD

BESTAL PVC ANGLE BEAD (Round Nose)

BESTAL PVC INNER CORNER BEAD

BESTAL ARCHITRAVE BEAD

22

20mm

19mm

19mm

20mm 20mm

29mm

29mm

20mm

D D

D

D

D

B

BG

G


25/28

23

All product specication are subject to tolerance (+/-10 percent), thus design may vary without prior notice

BESTAL PVC GROOVE JOINT

BESTAL PVC TILE TRIM

BESTAL PVC TILE TRIM (FLAT) BESTAL Z-BEAD

Reference G D Packing/box Colour

BGJ-10U/V 10mm 6.00mm 2m x 100pcs White



BGJ-25U/V 25mm 13.00mm 2m x 100pcs WhiteBGJ-30U/V 30mm 13.00mm 2m x 100pcs White


BGJ-50U 50mm 6.00mm 2m x 100pcs White

BGJ-75U 75mm 15.00mm 2m x 100pcs White

BGJ-20 C 20mm 13.00mm 2m x 100pcs White



Reference Packing/box Colour

BTT-10(F) 2.5m x 100pcs WhiteBTT-12(F) 2.5m x 100pcs White


BZB-10D 2.2m x 100pcs WhiteBZB-12D 2.2m x 100pcs White

D D

D

D

G G

G

F

Reference D Packing/box ColourBTT-10 10 2.5m x 100pcs White

BTT-12 12 2.5m x 100pcs White

23

BESTAL PVC BEADS

D


26/28

Reference Length H x W Packing/box Colour

BMJ 9 2.5m 9 x 8 100pcs Grey

BMJ 12 2.5m 12 x 10 100pcs Grey

Reference: Length H x W Packing/box Colour

BEJ 30 2.5m 30 x 9 50 pcs Grey



Reference Packing

BSG 4910 3.0m x 100pcs

All product specication are subject to tolerance (+/-10 percent), thus design may vary without prior notice

BESTAL PVC BEADS

BESTAL PVC DRIP GROOVE

BESTAL PVC MOVEMENT JOINT

BESTAL L-STRIP

BESTAL PVCCORNER CHAMFER

BESTAL PVC EXPANSION JOINT

BESTAL PVC STEP-GRIP

24

Reference G B Packing/box Colour

BDG-1310 13 20 2m x 100pcs White

BDG-2010 20 25 2m x 100pcs White

Reference H B Packing/box Colour

BLS 25 25 20 2.5m x 100pcs Grey

3.0m x 100pcs Grey

Reference: G B Packing/box Colour

BDG-20G 22 25 2m x 100pcs Grey

30mm

W

H

G

45mm

BEJ 9

BB

G

10

9mm

10

4925

20

H

W

25mm

17.68mm

21.21mm

17.68m

m

21.21m

m

30mm


27/28


28/28

BESTAL METAL PRODUCTS (SEA) PTE LTDNo.5 Gul Crescent, Singapore 629521Tel: (65) 6863 2939 (3 lines) Fax: (65) 6863 2995Email: [email protected]: www.bestalmetal.com

Copyright

Reserved

0114.8000

For enquiries, please contact:

BestalMetal Catalogue 2013

Documents

Transcript of BestalMetal Catalogue 2013