Best Practices Guide for Manufacturing, Storing, Handling and ...
Transcript of Best Practices Guide for Manufacturing, Storing, Handling and ...
![Page 1: Best Practices Guide for Manufacturing, Storing, Handling and ...](https://reader034.fdocuments.us/reader034/viewer/2022051521/586b64af1a28ab237a8b699a/html5/thumbnails/1.jpg)
Best Practices Guide for Manufacturing, Storing, Handling and Testing Rubber Modified Asphalt Mixtures AUDREY COPELAND FHWA Asphalt Mixture Expert Task Group Meeting April 8th, 2015 Fall River, MA
![Page 2: Best Practices Guide for Manufacturing, Storing, Handling and ...](https://reader034.fdocuments.us/reader034/viewer/2022051521/586b64af1a28ab237a8b699a/html5/thumbnails/2.jpg)
Motivation Current National Guidance documents are outdated
– Heitzman, M., State of the Practice – Design and Construction of Asphalt Paving Materials with Crumb Rubber Modifier, FHWA-SA-92-022, 1992
– Epps, J. Uses of Recycled Rubber Tires in Highway, NCHRP Synthesis of Highway Practice No. 198, 1994
GTR in pavement applications –long history starting in 1940’s, but applications/methods have evolved rapidly in past two decades
Different techniques /technological methods addressed past problems and have demonstrated enhanced pavement performance
• Favorable environmental and economic factors promote its acceptance by industry
As a result, a best practice guide which consolidates the use of current applications and specifications related to production, handling and storage is needed
![Page 3: Best Practices Guide for Manufacturing, Storing, Handling and ...](https://reader034.fdocuments.us/reader034/viewer/2022051521/586b64af1a28ab237a8b699a/html5/thumbnails/3.jpg)
Historical Perspective 1940’s- U.S Rubber Reclaiming Company (Vicksburg, MS) started
marketing rubber as dry particle additive for HMA (Baker et al, 2003)
1950’s- Few studies to evaluate GTR in HMA (Lewis and Welborn, 1954; Rex and Peck, 1954; Gregg and Alcoke, 1954)
1960-First Symposium on Rubber in Asphalt hosted by Asphalt Institute in Chicago-few papers under discussion
1960’s-Charles McDonald worked with asphalt and rubber to develop maintenance surface patch for cracked pavements by reacting asphalt and rubber at high temperatures-earlier experiments with asphalt rubber (AR)
1970’s-AR used for seal coats ( SAM) and interlayers (SAMI) over many miles of road in AZ
![Page 4: Best Practices Guide for Manufacturing, Storing, Handling and ...](https://reader034.fdocuments.us/reader034/viewer/2022051521/586b64af1a28ab237a8b699a/html5/thumbnails/4.jpg)
Historical Perspective 1975-1980- Caltrans started experimenting with AR
seal coats and dry process
1988-Definition for AR included in ASTM D8; specified later in ASTM D6114 (1997)
1980’s-1990’s –other states such as TX, FL conducted evaluations
1991-ISTEA required state to use minimum amount of GTR in asphalt pavements
1995-Mandate was lifted, but many sections were placed and national research efforts were underway
![Page 5: Best Practices Guide for Manufacturing, Storing, Handling and ...](https://reader034.fdocuments.us/reader034/viewer/2022051521/586b64af1a28ab237a8b699a/html5/thumbnails/5.jpg)
US Scrap Tire Market Trend
*Percentage of Million of Tires Generated Source : EPA, 1991; RMA, 2003, 2014
0
10
20
30
40
50
60
70
80
90
100
LandDisposed
Ground TireRubber
Tire DerivedFuel
Exported CivilEngineering
Other
78
4
11 5
2
20
10
45
3
19
4 8
24
53
6
4 4
1990 2003 2013
![Page 6: Best Practices Guide for Manufacturing, Storing, Handling and ...](https://reader034.fdocuments.us/reader034/viewer/2022051521/586b64af1a28ab237a8b699a/html5/thumbnails/6.jpg)
Ground Rubber Market 2013
• ~600,000 Tons of ground tire rubber consumed in the market~60 million tires
• ~41,000 tons of GTR used in asphalt pavements
Asphalt, 7%
Playgrounds, 31%
Molded / Extruded, 33%
Export, 6%
Automotive, 6%
Sport Surfaces, 17%
Percent of total pounds of ground tire rubber consumed
RMA, 2014
![Page 7: Best Practices Guide for Manufacturing, Storing, Handling and ...](https://reader034.fdocuments.us/reader034/viewer/2022051521/586b64af1a28ab237a8b699a/html5/thumbnails/7.jpg)
What Agencies are currently using GTR in Asphalt Mixtures ?
• Arizona
• California
• Delaware
• Florida
• Georgia
• Louisiana
• Missouri
• Nevada
• New Jersey
• Pennsylvania
• Ohio
• South Carolina
• Texas
*Based on limited data from Surveys: NAPA, 2014; Cheng and Hicks, 2012 *GTR use may include pavement preservation treatments e.g chip seals, interlayers
![Page 8: Best Practices Guide for Manufacturing, Storing, Handling and ...](https://reader034.fdocuments.us/reader034/viewer/2022051521/586b64af1a28ab237a8b699a/html5/thumbnails/8.jpg)
Challenges Developing this Guide
• Define common terminology
– Wet process, rubberized asphalt concrete?
– Asphalt rubber, terminal blend?
– Wet process- high viscosity, wet process -no agitation?
– What about hybrids?
![Page 9: Best Practices Guide for Manufacturing, Storing, Handling and ...](https://reader034.fdocuments.us/reader034/viewer/2022051521/586b64af1a28ab237a8b699a/html5/thumbnails/9.jpg)
Rubber Modified Asphalt Mixtures-Family Tree
Rubber Modified Asphalt Mixture
Rubber Modified Via Binder
Modification at the Plant
Asphalt Rubber Rubber Modified
Asphalt
Modification at the Terminal
Asphalt Rubber Rubber Modified
Asphalt
Rubber Modified Via Mix
Modified Rubber Particles
Unmodified Rubber Particles
Asphalt Mix Modified via Binder (GTR added to binder) or via Mix (GTR added to aggregate during the mixing process)
![Page 10: Best Practices Guide for Manufacturing, Storing, Handling and ...](https://reader034.fdocuments.us/reader034/viewer/2022051521/586b64af1a28ab237a8b699a/html5/thumbnails/10.jpg)
Best Practice Guide Content A total of nine chapters, the topics to be covered include: • Chapter 1-Introduction to Rubber Modified Asphalt and
Mixtures – History, Background, Benefits and Challenges; Terminology
• Chapter 2-GTR Production – Production methods, quality control
• Chapter 3-Methodologies – Rubber Modified Asphalt Mixtures via Binder – Rubber Modified Mixtures via Mix
• Chapter 4-Applications – Asphalt Mixtures – Pavement Preservation
![Page 11: Best Practices Guide for Manufacturing, Storing, Handling and ...](https://reader034.fdocuments.us/reader034/viewer/2022051521/586b64af1a28ab237a8b699a/html5/thumbnails/11.jpg)
Best Practice Guide Content • Chapter 5-Design
– Binder Design and Mix Design
• Chapter 6- Quality Control
– Binder Quality Control
– Mix Quality Control
• Chapter 7-Acceptance Testing
– Possible performance tests
• Chapter 8-Construction Practices
– Blending, storage, placement and compaction
• Chapter 9-Case Studies
– Performance, life cycle cost, noise, emissions
![Page 12: Best Practices Guide for Manufacturing, Storing, Handling and ...](https://reader034.fdocuments.us/reader034/viewer/2022051521/586b64af1a28ab237a8b699a/html5/thumbnails/12.jpg)
Potential Benefits • Improved performance and durability • Competitive with polymer modified binders
(terminal) • Possible noise improvement • Improved resistance to cracking • Possible reduction in paving thickness (Asphalt
Rubber) • Improve driving safety • Energy and environmental savings with reuse of
waste tires
![Page 13: Best Practices Guide for Manufacturing, Storing, Handling and ...](https://reader034.fdocuments.us/reader034/viewer/2022051521/586b64af1a28ab237a8b699a/html5/thumbnails/13.jpg)
Challenges • Lack of Industry Experience
• Lack of national standards
• Limited paving window
• Weather restrictions (not recommended during cold or rainy weather with temperature below 10°C)
• Lack of available processing facilities / mobilization cost for asphalt rubber production equipment
![Page 14: Best Practices Guide for Manufacturing, Storing, Handling and ...](https://reader034.fdocuments.us/reader034/viewer/2022051521/586b64af1a28ab237a8b699a/html5/thumbnails/14.jpg)
Chapter 2- Ground Tire Rubber Production
• Processing Systems
– Ambient Systems
– Cryogenic Systems
• Quality Control
– Standards
– Particle size requirement
– Industry Practice
![Page 15: Best Practices Guide for Manufacturing, Storing, Handling and ...](https://reader034.fdocuments.us/reader034/viewer/2022051521/586b64af1a28ab237a8b699a/html5/thumbnails/15.jpg)
Chapter 3-Methodologies
Two broad categories:
a) Rubber Modified Mixtures via Binder (Wet)
GTR combined with binder before mixing with aggregate, rubber is wet
- Asphalt Rubber (Wet Process with Agitation)
- Terminal blends (Wet Process no Agitation) - Hybrids
b) Rubber Modified Mixtures via Mix (Dry)
GTR is used to replace a fraction of aggregate within HMA, rubber is dry
- Dry Process
![Page 16: Best Practices Guide for Manufacturing, Storing, Handling and ...](https://reader034.fdocuments.us/reader034/viewer/2022051521/586b64af1a28ab237a8b699a/html5/thumbnails/16.jpg)
GTR-Binder Interaction Mechanism • Reaction at high temperature (160-220°C) includes two
processes:
– Partial digestion of rubber into asphalt
– Rubber absorption of aromatics that cause swelling
• After extended interaction or higher temperature, swelling continues until depolymerization/ devulcanization
• If depolymerization continues modifications of binder is lost
![Page 17: Best Practices Guide for Manufacturing, Storing, Handling and ...](https://reader034.fdocuments.us/reader034/viewer/2022051521/586b64af1a28ab237a8b699a/html5/thumbnails/17.jpg)
GTR-Binder Interaction Mechanisms
Depends on the following key factors that govern modification process:
Blending variables: Temperature, time and blending units (applied shear stress)
Base binder properties: binder source, type
GTR Properties: rubber source, processing method, particle size and content
![Page 18: Best Practices Guide for Manufacturing, Storing, Handling and ...](https://reader034.fdocuments.us/reader034/viewer/2022051521/586b64af1a28ab237a8b699a/html5/thumbnails/18.jpg)
Rubber Modified Mixture via Binder
Asphalt Rubber Terminal Blend
GTR size 10-20 mesh 40-80 mesh
GTR content >15% Typically <10%; up to 15% (few products)
Blending and digestion
Tanker-Rubber reacts with binder
Terminal-Rubber dissolves
Tank storage agitation
high Low or none
PG Grading no yes
Performance history 1960s 1990s
Most Common processes: Asphalt Rubber and Terminal Blend
![Page 19: Best Practices Guide for Manufacturing, Storing, Handling and ...](https://reader034.fdocuments.us/reader034/viewer/2022051521/586b64af1a28ab237a8b699a/html5/thumbnails/19.jpg)
Rubber Modified Mixture via Binder
Asphalt Rubber
Terminal Blend
Dense graded Y
Y Gap graded Y
Y Open graded Y
Y Preservation Treatments Y
![Page 20: Best Practices Guide for Manufacturing, Storing, Handling and ...](https://reader034.fdocuments.us/reader034/viewer/2022051521/586b64af1a28ab237a8b699a/html5/thumbnails/20.jpg)
Rubber Modified Mixture via Binder
Asphalt Rubber 1,500-2,500 centipoises at 375°F, extremely viscous
Terminal Blend 300-600 centipoises at 325 F, significantly less viscous than AR
Different technologies, if design and construct properly enhance performance
![Page 21: Best Practices Guide for Manufacturing, Storing, Handling and ...](https://reader034.fdocuments.us/reader034/viewer/2022051521/586b64af1a28ab237a8b699a/html5/thumbnails/21.jpg)
Chapter 4- Applications
Discussion of applications within following categories
1. Asphalt Mixtures (Dense Graded, Gap Graded, Open Graded, SMA)
2. Pavement Preservation (Interlayers, seal coats, crack sealants)
![Page 22: Best Practices Guide for Manufacturing, Storing, Handling and ...](https://reader034.fdocuments.us/reader034/viewer/2022051521/586b64af1a28ab237a8b699a/html5/thumbnails/22.jpg)
Chapter 5-Design
• Discussion of Binder Design, Mix Design
– GTR requirements, design gradations, binder test methods and mix design procedures used by agencies
![Page 23: Best Practices Guide for Manufacturing, Storing, Handling and ...](https://reader034.fdocuments.us/reader034/viewer/2022051521/586b64af1a28ab237a8b699a/html5/thumbnails/23.jpg)
Chapter 6-Quality Control
• Focus of this chapter will be GTR binder testing
– Traditional testing methods
– Viscosity testing
– Performance grade
• Variations of PG standard (example: Florida)
• 1 mm vs 2 mm gap
– Cup and bob testing
![Page 24: Best Practices Guide for Manufacturing, Storing, Handling and ...](https://reader034.fdocuments.us/reader034/viewer/2022051521/586b64af1a28ab237a8b699a/html5/thumbnails/24.jpg)
Chapter 7-Acceptance Testing
• Whether the mix is modified via the binder or the mix, ultimately it is the mixture performance which matters
• How do we determine if mixture will perform? – Rutting
– Low temperature cracking
– Top down cracking
– Fatigue cracking
– Moisture susceptibility
![Page 25: Best Practices Guide for Manufacturing, Storing, Handling and ...](https://reader034.fdocuments.us/reader034/viewer/2022051521/586b64af1a28ab237a8b699a/html5/thumbnails/25.jpg)
Timeline
Best Practice Guide is expected to be completed by Fall 2015
• Chapter 1-Introduction to Rubber Modified Asphalt and Mixtures APRIL 30
• Chapter 2-GTR Production APRIL 30 • Chapter 3-Methodologies MAY 15 • Chapter 4-Applications MAY 15 • Chapter 5-Design JUNE 15 • Chapter 6- Quality Control MAY 15 • Chapter 7-Acceptance Testing APRIL 30 • Chapter 8-Construction Practices JULY 15 • Chapter 9-Case Studies JULY 30
![Page 26: Best Practices Guide for Manufacturing, Storing, Handling and ...](https://reader034.fdocuments.us/reader034/viewer/2022051521/586b64af1a28ab237a8b699a/html5/thumbnails/26.jpg)
Review Process and Implementation
• Review – NAPA Technical Committees – Asphalt Pavement Alliance – Asphalt Institute and
SAPAs – Rubber Pavement Association and other rubber
associations – Expert Task Groups
• Implementation – Tech Brief(s) – Webinar Series – Regional Workshops?
![Page 27: Best Practices Guide for Manufacturing, Storing, Handling and ...](https://reader034.fdocuments.us/reader034/viewer/2022051521/586b64af1a28ab237a8b699a/html5/thumbnails/27.jpg)
Industry Research &Development Pavement Economics Committee
![Page 28: Best Practices Guide for Manufacturing, Storing, Handling and ...](https://reader034.fdocuments.us/reader034/viewer/2022051521/586b64af1a28ab237a8b699a/html5/thumbnails/28.jpg)
Green Codes & LCA Pavement Economics Committee
• Affecting product selection decisions now …and more into the future
• NAPA working to dispel myths and promote real science
• Life cycle assessment (LCA) & Environmental Product Declarations (EPDs)
• Heather Dylla, Dir. Sustainable Engineering
![Page 29: Best Practices Guide for Manufacturing, Storing, Handling and ...](https://reader034.fdocuments.us/reader034/viewer/2022051521/586b64af1a28ab237a8b699a/html5/thumbnails/29.jpg)
Spreading the Message & Science Go To Market
• Website & Advertisements
![Page 30: Best Practices Guide for Manufacturing, Storing, Handling and ...](https://reader034.fdocuments.us/reader034/viewer/2022051521/586b64af1a28ab237a8b699a/html5/thumbnails/30.jpg)
Spreading the Message & Science Go To Market
• Infographics
![Page 31: Best Practices Guide for Manufacturing, Storing, Handling and ...](https://reader034.fdocuments.us/reader034/viewer/2022051521/586b64af1a28ab237a8b699a/html5/thumbnails/31.jpg)
Spreading the Message & Science Go To Market
• Videos
“Place to be…”
“Road age…”
“While you were…”
![Page 32: Best Practices Guide for Manufacturing, Storing, Handling and ...](https://reader034.fdocuments.us/reader034/viewer/2022051521/586b64af1a28ab237a8b699a/html5/thumbnails/32.jpg)
Industry High RAP Tour of Japan
![Page 33: Best Practices Guide for Manufacturing, Storing, Handling and ...](https://reader034.fdocuments.us/reader034/viewer/2022051521/586b64af1a28ab237a8b699a/html5/thumbnails/33.jpg)
We’re adding to NAPA’s team of industry leaders! http://www.asphaltpavement.org/PDFs/jobdescr-dir-pavement%20innovation_20150327.pdf.