Best of Accessories...multi-cutter to do this job. However, they need to use the machine with...
Transcript of Best of Accessories...multi-cutter to do this job. However, they need to use the machine with...
![Page 1: Best of Accessories...multi-cutter to do this job. However, they need to use the machine with reduced speed adjustments to protect it from getting damaged. The new C-Tec speed blade](https://reader034.fdocuments.us/reader034/viewer/2022042114/5e909afc25293c2e28177302/html5/thumbnails/1.jpg)
Best of Accessories July – September 2014
NEW! Innovation from Bosch:C-Tec Speed long plunge-cutting saw blades Cut at least 30 % faster.
Bosch Customer Service01895 838791
This number connects you to the Bosch Customer Service Team. It is there to answer your questions about technical matters and for customer service – quick and user-friendly. Outside office hours an answer phone will take your message.
Imprint
PublisherY. XXXXXXXX
EditorY. XXXXXXXX
AddressRobert Bosch GmbH XXXXXX XXXXXXXX YYYY YYYYYYYYYYYYY www.bosch.com
Edition1
1 619 A00 ??? – en – PT-AC/MKB-EU – Printed at (Printer address incl. state). Subject to technical alterations. Liability for printing errors is not accepted. Date: ??.??.2013
Page 18 – 35
NEW! Sabre saw blades with Carbide Technology
Page 45 – 50
Promotions
![Page 2: Best of Accessories...multi-cutter to do this job. However, they need to use the machine with reduced speed adjustments to protect it from getting damaged. The new C-Tec speed blade](https://reader034.fdocuments.us/reader034/viewer/2022042114/5e909afc25293c2e28177302/html5/thumbnails/2.jpg)
3/2014 | Best of Accessories C-Tec Speed blades | Innovation | 3
The fastest saw blade ever for window installers
Table of contents
The renovation setting offers many challenges which professionals need to solve in order to deliver the job on schedule. Window removal can be difficult and time consuming. When cutting out window corners or hidden fixings dam-ages to the building components must be avoided. Specialists prefer to use the multi-cutter to do this job. However, they need to use the machine with reduced speed adjustments to protect it from getting damaged.
The new C-Tec speed blade with a special slim design allows the machine to be operated at full speed. The C-Tec round cutting edge and extra blade length results in at least 30 % more cutting speed.
As a leading manufacturer of accessories for power tools, Bosch puts its faith in excellent quality and customer benefit, which is why it develops and pro duces accessories itself. The appropriate accessory is therefore available for every application – be it sawing, routing, rasping, cutting, scraping, sanding or polishing, even in hard-to-reach areas. For deep cuts at full speed.
Leader in quality and innovation – Made in SwitzerlandAccessories for multi-cutters 03
▶ C-Tec Speed blades 03 ▶ Profile Sander 08 ▶ Multi Purpose Knife 10 ▶ Top sellers in HCS 12 ▶ Wood and Tile sets 13 ▶ Supercut range 14 ▶ Overview 16
Sabre sawing 18
▶ Carbide Technology 18 ▶ Progressor for Wood and Metal 22 ▶ Endurance for Stainless Steel 24 ▶ Basic for Cast Iron 26
▶ Endurance for Fiber Plaster 28 ▶ Endurance for Aerated Concrete 30 ▶ Endurance for Brick 32 ▶ Overview 34
Drilling 36
▶ SDS plus drill bits 36 ▶ SDS max drill bits 43
Promotions 45
▶ Accessories for multi-cutters 45 ▶ Sabre sawing 48 ▶ Drilling 49
2 | Overview Best of Accessories | 3/2014
![Page 3: Best of Accessories...multi-cutter to do this job. However, they need to use the machine with reduced speed adjustments to protect it from getting damaged. The new C-Tec speed blade](https://reader034.fdocuments.us/reader034/viewer/2022042114/5e909afc25293c2e28177302/html5/thumbnails/3.jpg)
4 | Innovation | C-Tec Speed blades Best of Accessories | 3/2014 3/2014 | Best of Accessories C-Tec Speed blades | Innovation | 5
At least 30 % more cutting speed thanks to unique product features
The new C-Tec round cutting edge and extra blade length results in at least 30 % more cutting speed.
Benefits
▶ With the new C-Tec Speed I am able to make deep cuts into window frames and I‘m noticeably faster
We prepared for you a sales package containing: ▶ Sample Card ▶ Fold-out Leaflet ▶ Wobbler ▶ POS Video ▶ Side Poster for POS
Sales support
Attractive Market: The market for oscillating multi-tool accessories grows much faster than the powertool accessories market. In the future, additional growth potential will come from heavy users and specialized appli-cations such as window repair. These applications grow strongly offering many business opportunities. The new C-Tec Speed is best suitable for:
▶ Window installers ▶ Carpenter ▶ Roofers
70 mm extra length ▶ Provides a larger amplitude
resulting in more speed ▶ Ideal for deep cuts
The slim design reduces stress on the tool drive, allowing operation at full speed.
0.6 mm
+ 30 %speed
Standard
1.8 mm
C-Tec Speed
2.6 mm
Standard C-Tec Speed
C-Tec rounded cutting edge ▶ For fast plunge in and less
tooth damage at the sides
![Page 4: Best of Accessories...multi-cutter to do this job. However, they need to use the machine with reduced speed adjustments to protect it from getting damaged. The new C-Tec speed blade](https://reader034.fdocuments.us/reader034/viewer/2022042114/5e909afc25293c2e28177302/html5/thumbnails/4.jpg)
NEW! C-Tec Speed blades Productivity for professionals
WoodWood and Metal
Mat
eria
l
Wid
th
[mm
]
Leng
ht[m
m]
Part
num
ber
Pack
qua
ntity
Min
imum
ord
er
quan
tity
Barc
ode
3 165
140 …
Product properties Ordering information
Mat
eria
l
Wid
th
[mm
]
Leng
ht[m
m]
Part
num
ber
Pack
qua
ntity
Min
imum
ord
er
quan
tity
Barc
ode
3 165
140 …
Product properties Ordering information
HCS 32 70
2 608 662 309 1 1 773 300
2 608 662 310 5 1 773 317
2 608 662 311 1 25 773 324
BIM 32 70
2 608 662 313 1 1 773 348
2 608 662 314 5 1 773 355
2 608 662 315 1 25 773 362
AIZ 32 ALBBIM C-Tec Speed long plunge-cutting saw blade Wood and Metal
▶ Fast and deep plunge cutting in wood and metal (e.g. window frame with metal elements) ▶ Fast and deep plunge cutting in a wood beam with nails (e.g. skylight beam) ▶ Cutting of non-hardened nails, screws and steel profiles (e.g. hidden metal fixing)
AIZ 32 BLCHCS C-Tec Speed long plunge-cutting saw blade Wood
▶ Fast and deep plunge cutting in softwood beams (e.g. skylight beam) ▶ Fast and deep plunge cutting in softwood frames (e.g. window frame) ▶ Deep cut outs of joints in softwood beams (e.g. for mortise and tenon joints)
6 | Accessories for multi-cutters | C-Tec Speed blades Best of Accessories | 3/2014 3/2014 | Best of Accessories C-Tec Speed blades | Accessories for multi-cutters | 7
![Page 5: Best of Accessories...multi-cutter to do this job. However, they need to use the machine with reduced speed adjustments to protect it from getting damaged. The new C-Tec speed blade](https://reader034.fdocuments.us/reader034/viewer/2022042114/5e909afc25293c2e28177302/html5/thumbnails/5.jpg)
8 | Accessories for multi-cutters | Profile sander Best of Accessories | 3/2014 3/2014 | Best of Accessories Profile sander | Accessories for multi-cutters | 9
NEW! Unique Profile Sander Efficient and comfortable sanding of round surfaces
Easy change of sanding paper thanks to the velcro fixing on the sides
For round surfaces up to ⌀ 55 mm thanks to the flexible self- adjusting sanding paper
Wood
Mat
eria
l
Wid
th
[mm
]
Leng
ht[m
m]
Part
num
ber
Pack
qua
ntity
Min
imum
ord
er
quan
tity
Barc
ode
3 165
140 …
Product properties Ordering information
– 55 70 2 608 662 346 1 1 785 860
AUZ 70 GProfile Sander with 4 sheets of sanding paper (2x80 / 2x120 grit)
▶ Sanding of round wood and paint surfaces up to Ø 55 mm (e.g. banisters or spindles) ▶ Quick and easy sanding sheet changes thanks to micro Velcro-type fastening system
![Page 6: Best of Accessories...multi-cutter to do this job. However, they need to use the machine with reduced speed adjustments to protect it from getting damaged. The new C-Tec speed blade](https://reader034.fdocuments.us/reader034/viewer/2022042114/5e909afc25293c2e28177302/html5/thumbnails/6.jpg)
10 | Accessories for multi-cutters | Multi Purpose Knife Best of Accessories | 3/2014 3/2014 | Best of Accessories Multi Purpose Knife | Accessories for multi-cutters | 11
NEW! Multi Purpose Knife Easy and fast cutting in flexible material
Push – Make cuts without any underlayment
Pull – Unique, hooked blade design allows one-handed cutting
Mat
eria
l
Wid
th
[mm
]
Leng
ht[m
m]
Part
num
ber
Pack
qua
ntity
Min
imum
ord
er
quan
tity
Barc
ode
3 165
140 …
Product properties Ordering information
HCS – – 2 608 662 431 1 1 792 967
ASZ 32 SCHCS Multi Purpose Knife
▶ Cutting flexible abrasive materials (e.g. felt roofing, asphalt shingles) ▶ Cutting soft material (e.g. carpet, cardboard, pvc-flooring) ▶ Cutting outdoor turf
Multi Material
![Page 7: Best of Accessories...multi-cutter to do this job. However, they need to use the machine with reduced speed adjustments to protect it from getting damaged. The new C-Tec speed blade](https://reader034.fdocuments.us/reader034/viewer/2022042114/5e909afc25293c2e28177302/html5/thumbnails/7.jpg)
3/2014 | Best of Accessories Wood and Tile sets | Accessories for multi-cutters | 1312 | Accessories for multi-cutters | Top sellers in HCS Best of Accessories | 3/2014
NEW! Top sellers now available in HCS Excellent price-performance ratio
NEW! Wood and Tile sets Basic sets for promotional activities – in an attractive POS Box
AIZ 32 BPC HCS C-Tec Precision plunge-cutting saw blade Hard Wood
▶ Precise plunge cutting in hardwood (e.g. for installing a display) ▶ Precise plunge cutting a recess in furniture (e.g. to enable access to a mains socket) ▶ Cutting wooden panels (e.g. for installing a skylight)
Display OMT Basic Tile Set
Display OMT Basic Wood Set
AIZ 65 BCHCS plunge-cutting saw blade Wood
▶ Plunge cutting in softwood (e.g. for installing a ventilation grille) ▶ Plunge cutting in softwood boards (e.g. for installing a shelf board) ▶ Cut-off a door frame near the floor
AIZ 65 BSCHCS plunge-cutting saw blade Hard Wood
▶ Plunge cutting in hardwood (e.g. for installing a ventilation grille) ▶ Plunge cutting in boards (e.g. for installing a shelf board) ▶ Cutting wooden panels (e.g. for installing a skylight)
Mat
eria
l
Wid
th
[mm
]
Leng
ht[m
m]
Part
num
ber
Pack
qua
ntity
Min
imum
ord
er
quan
tity
Barc
ode
3 165
140 …
Product properties Ordering information
Typ
Wid
th
[mm
]
Leng
ht[m
m]
Diam
eter
[m
m]
Part
num
ber
Pack
qua
ntity
Min
imum
ord
er
quan
tity
Barc
ode
3 165
140 …
Product properties Ordering information
Typ
Wid
th
[mm
]
Leng
ht[m
m]
Diam
eter
[m
m]
Part
num
ber
Pack
qua
ntity
Min
imum
ord
er
quan
tity
Barc
ode
3 165
140 …
Product properties Ordering information
Carbide Technology segment saw blade
– – 85 2 608 662 342 3 10 779 647
HCS Scraper 52 26 –
BIM plunge cutting saw blade
20 20 –
HCS segment saw blade – – 85 2 608 662 343 3 10 779 654
HCS Scraper 32 40 –
BIM plunge-cutting saw blade
20 20 –
Wood
HCS 32 40
2 608 662 360 1 1 785 051
2 608 662 361 5 1 785 068
2 608 662 362 1 25 785 075
HCS 65 40
2 608 662 357 1 1 785 020
2 608 662 358 5 1 785 037
2 608 662 359 1 25 785 044
HCS 65 40
2 608 662 354 1 1 784 993
2 608 662 355 5 1 785 006
2 608 662 356 1 25 785 013
![Page 8: Best of Accessories...multi-cutter to do this job. However, they need to use the machine with reduced speed adjustments to protect it from getting damaged. The new C-Tec speed blade](https://reader034.fdocuments.us/reader034/viewer/2022042114/5e909afc25293c2e28177302/html5/thumbnails/8.jpg)
14 | Accessories for multi-cutters | Supercut range Best of Accessories | 3/2014 3/2014 | Best of Accessories Supercut range | Accessories for multi-cutters | 15
NEW! Supercut range Innovations also available in FEIN Supercut interface
BIM 32 70 2 608 662 316 1 25 773 379 BIM 32 50 2 608 662 350 1 25 784 887
HCS 32 70 2 608 662 312 1 25 773 331
BIM 32 40 2 608 662 351 1 25 784 894
Carbide 32 70 2 608 662 317 1 25 773 386
HCS 32 40 2 608 662 352 1 25 784 900
Carbide 32 40 2 608 662 353 1 25 784 917
HCS – 90 2 608 662 374 1 25 787 505
SAIZ 32 ALB BIM C-Tec Speed long plunge-cutting saw blade Wood and Metal
▶ Fast and deep plunge cutting in wood and metal (e.g. window frame with metal elements) ▶ Fast and deep plunge cutting in a wood beam with nails (e.g. skylight beam) ▶ Cutting of non-hardened nails, screws and steel profiles (e.g. hidden metal fixing)
SAIZ 32 EPB BIM C-Tec Precision plunge-cutting saw blade Wood and Metal
▶ Precise plunge cutting in wood and metal (e.g. in aluminium-reinforced parquet / laminate) ▶ Precise cutting of non-ferrous pipes and profiles with smaller dimensions ▶ Precise cutting of non-hardened nails, screws and steel profiles with small dimensions
SAIZ 32 BLCHCS C-Tec Speed long plunge-cutting saw blade Wood
▶ Fast and deep plunge cutting in softwood beams (e.g. skylight beam) ▶ Fast and deep plunge cutting in softwood frames (e.g. window frame) ▶ Deep cut outs of joints in softwood beams (e.g. balcony construction)
SAIZ 32 BPBBIM C-Tec Precision plunge-cutting saw blade Hard Wood
▶ Precise plunge cutting in hardwood (e.g. recess for fittings in kitchen front cover) ▶ Precise plunge cutting in laminated panels or hardwood (e.g. for installing a ventilation grille) ▶ Cutting a precise recess in a furniture component (e.g. to enable access to a mains socket)
SAIZ 32 ALTLong Carbide Technology teeth plunge-cutting saw blade Metal, Long MetalMax
▶ Cutting hardened screws, nails (e.g. window screws) ▶ Cutting hardened steel profiles (e.g. hidden metal fixing) ▶ Plunge cuts in abrasive materials like porous concrete (e.g. electrical boxes)
SAIZ 32 EPCHCS C-Tec Precision plunge-cutting saw blade Wood
▶ Precise plunge cutting in softwood (e.g. for mortise and tenon joint) ▶ Cutting a precise recess in a furniture component (e.g. to enable access to a mains socket) ▶ Precise plunge cutting in softwood (e.g. for installing a ventilation grille)
SAIZ 32 ATCarbide Technology teeth plunge-cutting saw blade Metal, MetalMax
▶ Cutting hardened screws and nails ▶ Cutting INOX/stainless steel (e.g. kitchen front cover) ▶ Plunge cuts in severely abrasive materials (e.g. fibreglass) SAII 32 SLC
HCS Universal Caulk Cutter ▶ Deep cutting of soft expansion joints (e.g. window caulk) ▶ Deep cutting of sealant
Mat
eria
l
Wid
th
[mm
]
Leng
ht[m
m]
Part
num
ber
Pack
qua
ntity
Min
imum
ord
er
quan
tity
Barc
ode
3 165
140 …
Product properties Ordering information
Mat
eria
l
Wid
th
[mm
]
Leng
ht[m
m]
Part
num
ber
Pack
qua
ntity
Min
imum
ord
er
quan
tity
Barc
ode
3 165
140 …
Product properties Ordering information
FEIN Supercut FEIN Supercut
![Page 9: Best of Accessories...multi-cutter to do this job. However, they need to use the machine with reduced speed adjustments to protect it from getting damaged. The new C-Tec speed blade](https://reader034.fdocuments.us/reader034/viewer/2022042114/5e909afc25293c2e28177302/html5/thumbnails/9.jpg)
16 | Accessories for multi-cutters | Overview Best of Accessories | 3/2014 3/2014 | Best of Accessories Overview | Accessories for multi-cutters | 17
Flooring work* The problem solvers for working really close to edges or in corners.
Tile or bathroom renovationThe specialists for hard applications.
Automobile and ship building*The specialists for sawing, sanding and polishing work on land and also at sea.
Trimming and adjustment work*The professionals for working in tight spaces.
For work with insulation, sealants and soft materials The experts for clean and quick cuts in very soft materials.
Multi Material
Wood Grout andAbrasive
Metal Wood andMetal
Direct Fit Bosch, Makita, Fein MultiMaster, Milwaukee
* Bosch offers a comprehensive range of powerful 93 mm delta sanding sheets, appropriate for all multi-cutter power tools, for sanding paint, varnish, wood and non-metallic materials such as stone or glass. With Velcro-type fastening system for fast sheet changes.
Unique color coding system for easy selection of the right blade at the point of purchase and in your toolbox!
Model AVZ 70 RT Part no. 2 608 661 757
3 max, Carbide Technology grout and mortar remover, 70 mm
Model ACZ 85 RD Part no. 2 608 661 689
Diamond-RIFF segment saw blade, 85 mm
Model ACZ 100 BBPart no. 2 608 661 633
BIM segment saw blade, Wood and Metal, depressed centre, 100 mm
Model ACZ 100 SWBPart no. 2 608 661 693
BIM serrated segment blade, Multi Material, 100 mm
Model AIZ 32 EPBPart no. 2 608 661 864
C-Tec Precision, BIM plunge-cutting saw blade, Wood and Metal, 32 × 50 mm
Model ACI 85 EBPart no. 2 608 661 758
BIM-TiN segment saw blade, Multi Material, flat, 85 mm
Model ACZ 85 EBPart no. 2 608 661 636
BIM segment saw blade, Wood and Metal, depressed centre, 85 mm
Model ACZ 100 SBPart no. 2 608 661 871
BIM segment blade, Multi Material, 100 mm
Model AIZ 32 BPBPart no. 2 608 661 863
C-Tec Precision, BIM plunge-cutting saw blade, Hard Wood, 32 × 40 mm
Model ACI 65 ABPart no. 2 608 661 759
BIM-TiN segment saw blade, Multi Material, flat, 65 mm
Model AIZ 32 EPCPart no. 2 608 661 862
C-Tec Precision, HCS plunge-cutting saw blade, Wood, 32 × 40 mm
Model AOI 85 EBPart no. 2 608 661 760
BIM-TiN round saw blade, Multi Material, flat, 85 mm
Model ACZ 85 RTPart no. 2 608 661 642
Carbide Technology segment saw blade, 85 mm
Model ACZ 85 ECPart no. 2 608 661 643
HCS segment saw blade, Wood, depressed centre, 85 mm
Model AIZ 28 SWCPart no. 2 608 662 050
HCS universal cutter, serrated edge, 28 × 50 mm
Model AIZ 65 BBPart no. 2 608 661 781
BIM plunge-cutting saw blade, Wood and Nails, 65 × 40 mm
Model AOI 65 ABPart no. 2 608 661 761
BIM-TiN round saw blade, Multi Material, flat, 65 mm
Model AIZ 32 EPBPart no. 2 608 661 864
BIM C-Tec Precision plunge-cutting saw blade,Wood and Metal, 32 × 50 mm
Model AIZ 28 SCPart no. 2 608 661 691
HCS universal joint cutter, 28 × 50 mm
Model AIZ 28 EBPart no. 2 608 661 644
BIM plunge-cutting saw blade, Wood and Metal, 28 × 50 mm
Model ACZ 85 RDPart no. 2 608 661 689
Diamond-RIFF segment saw blade, 85 mm
Model AIZ 65 BSBPart no. 2 608 662 017
BIM plunge-cutting saw blade, Hard Wood, 65 × 40 mm
Model ACZ 65 RTPart no. 2 608 661 692
Carbide Technology thin-kerf segment saw blade, 65 mm
Model AIZ 65 BBPart no. 2 608 661 781
BIM plunge-cutting saw blade, Wood and Nails, 65 × 40 mm
Model AIZ 65 BCPart no. 2 608 662 357
NEW! HCS plunge-cutting saw blade, Wood, 65 × 40 mm
Model ATZ 52 SFCPart no. 2 608 661 647
HCS scraper, flexible, 52 × 38 mm
Model ASZ 32 SCPart no. 2 608 662 431
NEW! Multi purpose knife, Multi Material
Model AIZ 32 ATPart no. 2 608 662 018
MetalMax, Carbide Technology plunge-cutting saw blade, Metal, 32x40 mm
Model AVZ 78 RTPart no. 2 608 661 648
Carbide Technology sanding plate, 78 mm
Model AIZ 65 BSBPart no. 2 608 662 017
BIM plunge-cutting saw blade, Hard Wood, 65 × 40 mm
Model AIZ 65 BSCPart no. 2 608 662 354
NEW! HCS plunge-cutting saw blade, Hard Wood, 65 × 40 mm
Model ASZ 32 SCPart no. 2 608 662 431
NEW! Multi purpose knife, Multi Material
Model AIZ 32 ECPart no. 2 608 661 637
HCS plunge-cutting saw blade, Wood, 32 × 40 mm
Model AIZ 20 ECPart no. 2 608 661 638
HCS plunge-cutting saw blade, Wood, 20 × 30 mm
Model AIZ 32 RTPart no. 2 608 661 868
Carbide Technology plunge-cutting saw blade, 32 × 30 mm
Model AIZ 32 RT Part no. 2 608 661 868
Carbide Technology plunge-cutting saw blade, 32 × 30 mm
Model AOI 85 EBPart no. 2 608 661 760
BIM-TiN round saw blade, Multi Material, flat, 85 mm
Model AIZ 10 ECPart no. 2 608 661 639
HCS plunge-cutting saw blade, Wood, 10 × 30 mm
Model ACZ 65 RTPart no. 2 608 661 692
Carbide Technology thin-kerf segment saw blade, 65 mm
Model AIZ 20 ATPart no. 2 608 662 019
MetalMax, Carbide Technology plunge-cutting saw blade, Metal, 20 × 30 mm
Model AIZ 20 RTPart no. 2 608 661 869
Carbide Technology plunge-cutting saw blade, 20 × 20 mm
Model Polishing feltPart no. 2 608 613 016
Hard, 93 mm
Model AIZ 20 RTPart no. 2 608 661 869
Carbide Technology plunge-cutting saw blade, 20 × 20 mm
Model ACZ 100 SWBPart no. 2 608 661 693
BIM serrated segment blade, Multi Material, 100 mm
Model AIZ 32 ATPart no. 2 608 662 018
MetalMax, Carbide Technology plunge-cutting saw blade, Metal, 32 × 40 mm
Model White PaintPart no. 2 608 607 542
Sanding sheet set, 93 mm
Model AIZ 20 ATPart no. 2 608 662 019
MetalMax, Carbide Technology plunge-cutting saw blade, Metal, 20 × 30 mm
Model AIZ 32 EPBPart no. 2 608 661 864
BIM C-Tec Precision plunge-cutting saw blade,Wood and Metal, 32 × 50 mm
Model ATZ 52 SFCPart no. 2 608 661 647
HCS scraper, flexible, 52 × 38 mm
Model AIZ 10 ABPart no. 2 608 661 641
BIM plunge-cutting saw blade, Metal, 10 × 20 mm
Model AIZ 20 ABPart no. 2 608 661 640
BIM plunge-cutting saw blade, Metal, 20 × 20 mm
Model AIZ 32 ABPart no. 2 608 661 688
BIM plunge-cutting saw blade, Metal, 32 × 30 mm
Model AIZ 28 EBPart no. 2 608 661 644
BIM plunge-cutting saw blade, Wood and Metal, 28 × 50 mm
Model ATZ 52 SCPart no. 2 608 661 646
HCS scraper, rigid, 52 x 26 mm
Model ACI 85 EBPart no. 2 608 661 758
BIM-TiN segment saw blade, Multi Material, flat, 85 mm
Model ACI 65 ABPart no. 2 608 661 759
BIM-TiN segment saw blade, Multi Material, flat, 65 mm
Model AIZ 32 ABPart no. 2 608 661 688
BIM plunge-cutting saw blade, Metal, 32 × 30 mm
Model Red Wood-topPart no. 2 608 607 540
Sanding sheet set, 93 mm
Model ACZ 85 EBPart no. 2 608 661 636
BIM segment saw blade, Wood and Metal, depressed centre, 85 mm
Model AIZ 20 ABPart no. 2 608 661 640
BIM plunge-cutting saw blade, Metal, 20 × 20 mm
Model Expert depth stopPart no. 2 608 000 590
Variable adjustment
Model Basic depth stopPart no. 2 608 000 589
Four-stage adjustment
Model Red WoodPart no. 2 608 607 541
Sanding sheet set, 93 mm
Model Black StonePart no. 2 608 607 543
Sanding sheet set, 93 mm
Model ACZ 85 RTT Part no. 2 608 661 870
Carbide Technology thick-kerf segment saw blade, 85 mm
Model AIZ 32 ALBPart no. 2 608 662 313
NEW! C-Tec Speed, BIM long plunge-cutting saw blade, Wood and Metal, 32 × 70 mm
Model AIZ 32 BPCPart no. 2 608 662 360
NEW! C-Tec Precision, HCS plunge-cutting saw blade, Hard Wood, 32 × 40 mm
Model AIZ 32 BLCPart no. 2 608 662 309
NEW! C-Tec Speed, HCS long plunge-cuttting blade, Wood, 32 × 70 mm
Model AIZ 65 BCPart no. 2 608 662 357
NEW! HCS plunge-cutting saw blade, Wood, 65 × 40 mm
Model AIZ 65 BSCPart no. 2 608 662 354
NEW! HCS plunge-cutting saw blade, Hard Wood, 65 × 40 mm
Model AIZ 32 BBPart no. 2 608 661 645
BIM plunge-cutting saw blade, Hard Wood, 32 × 40 mm
Model AUZ 70 GPart no. 2 608 662 346
NEW! Profile Sander, 60 × 70 × 26 mm
Model AVI 93 GPart no. 2 608 000 493
Sanding plate, 93 mm
Model AVI 93 GPart no. 2 608 000 493
Sanding plate, 93 mm
Model AVI 93 GPart no. 2 608 000 493
Sanding plate, 93 mm
Accessories for multi-cutter power tools Perfect trimming, adjusting and repairing
![Page 10: Best of Accessories...multi-cutter to do this job. However, they need to use the machine with reduced speed adjustments to protect it from getting damaged. The new C-Tec speed blade](https://reader034.fdocuments.us/reader034/viewer/2022042114/5e909afc25293c2e28177302/html5/thumbnails/10.jpg)
3/2014 | Best of Accessories Carbide Technology | Innovation | 19
NEW! Sabre Saw blades with Carbide Technlology At last the solution for toughest applications
Tougher than the toughest materials At last the solution for toughest applications
Advanced materials such as stainless steel or hardened high-alloy screws are increasingly used in the construc-tion industry. Cutting these materials when demolish-ing wood with metal elements is extremely difficult. Currently there is no feasible method for cutting such tough materials.
Bi-metal sabre saw blades fail right away. The new Progressor for Wood and Metal sabre saw blades with Carbide Technology are capable of cutting through all tough wood and metal materials. They are the perfect solution for demolition work.
As a leading manufacturer of accessories for power tools, Bosch puts its faith in excellent quality and customer benefit, which is why it develops and pro duces accessories itself. The appropriate accessory is therefore available for every application – be it sawing, routing, rasping, cutting, scraping, sanding or polishing, even in hard-to-reach areas. For powerful cuts in advanced materials.
Leader in quality and innovation – Made in Switzerland
![Page 11: Best of Accessories...multi-cutter to do this job. However, they need to use the machine with reduced speed adjustments to protect it from getting damaged. The new C-Tec speed blade](https://reader034.fdocuments.us/reader034/viewer/2022042114/5e909afc25293c2e28177302/html5/thumbnails/11.jpg)
20 | Innovation | Carbide Technology Best of Accessories | 3/2014 3/2014 | Best of Accessories Carbide Technology | Innovation | 21
For powerful cuts in advanced materials Blade specially designed for powerful demolition cuts through all tough wood and metal materials
Benefits
▶ With the new Progressor for Wood and Metal sabre saw blade, I can now cut through all tough wood and metal materials, even high-alloy steels, without any problem
We prepared for you a sales package containing: ▶ Sample Card ▶ Fold-out Leaflet ▶ Wobbler ▶ POS Video
Sales support
Individually welded, ground teeth ▶ Provide ultimate flexibility and
impact strength needed for heavy demolition work
Increased blade width and thickness
▶ For optimal stability in demolition applications
Progressive tooth geometry ▶ For universal use in
thin and thick materials
Carbide Technology ▶ Capable of cutting through all
tough wood and metal materials ▶ Outstanding lifetime, even
when cutting high-alloy steels
Attractive Market: The use of stainless steel in the construction industry countinously increases. Currently there are limited solutions for demolishing advanced steels combined with wood. Common bi-metal blades fail quickly. For this reason carbide products are ideal for tough applications by solving the problem. The new Progressor for Wood and Metal is best suitable for:
▶ Demolition companies ▶ Renovation companies ▶ Construction companies
![Page 12: Best of Accessories...multi-cutter to do this job. However, they need to use the machine with reduced speed adjustments to protect it from getting damaged. The new C-Tec speed blade](https://reader034.fdocuments.us/reader034/viewer/2022042114/5e909afc25293c2e28177302/html5/thumbnails/12.jpg)
22 | Sabre sawing | Progressor for Wood and Metal Best of Accessories | 3/2014 3/2014 | Best of Accessories Progressor for Wood and Metal | Sabre sawing | 23
Outstanding long lifetime in wood with metal even in combination with high-alloy steel
NEW! Carbide Progressor for Wood and Metal Ideal for demolition
Common Bi-metal blades fail quickly when cutting advanced materials such as stainless steel or high-alloy screws
The new Progressor for Wood and Metal is capable of cutting through all tough wood and metal materials
Wood and Metal
5 – 100 5 – 100 3 < 100 3 – 4 / 6 – 8
150 × 25 × 1.25 2 608 653 099 C1c 1 1 772 976
5 – 175 5 – 175 6 < 175 3 – 4 / 6 – 8
225 × 25 × 1.25 2 608 653 100 C1c 1 1 772 983
5 – 250 5 – 250 8 < 250 3 – 4 / 6 – 8
300 × 25 × 1.25 2 608 653 101 C1c 1 1 772 990
Woo
d w
ith (h
ard-
ende
d) s
crew
s /
nails
[mm
]W
ood
with
(h
igh-
allo
y) s
teel
elem
ents
[mm
]Ca
st ir
on, m
ax d
ia.
[Inch
]
GFK
/FRP
[mm
]To
oth
spac
ing
[mm
] / T
PI
Dim
ensi
ons
L × W
× T
[mm
]
Part
num
ber
Pack
agin
g ty
pePa
ck q
uant
ityM
inim
um o
rder
quan
tity
Barc
ode
3 165
140 …
Product properties Ordering information
Carbide tipped (single tooth), side set, ground teethWood with (hardened) screws / nails (5 – 100 mm), wood with (high-alloy) steel elements (5 – 100 mm), cast iron (⌀ max 3"), GFK / FRP (< 100 mm). Ideal for demolition.
Carbide tipped (single tooth), side set, ground teethWood with (hardened) screws / nails (5 – 175 mm), wood with (high-alloy) steel elements (5 – 175 mm), cast iron (⌀ max 6"), GFK / FRP (< 175 mm). Ideal for demolition.
Carbide tipped (single tooth), side set, ground teethWood with (hardened) screws / nails (5 – 250 mm), wood with (high-alloy) steel elements (5 – 250 mm), cast iron (⌀ max 8"), GFK / FRP (<250 mm). Ideal for demolition.
S 956 XHM
S 1156 XHM
S 1256 XHM
Example with Carbide Progressor for Wood and Metal Example with common Bi-metal blade
![Page 13: Best of Accessories...multi-cutter to do this job. However, they need to use the machine with reduced speed adjustments to protect it from getting damaged. The new C-Tec speed blade](https://reader034.fdocuments.us/reader034/viewer/2022042114/5e909afc25293c2e28177302/html5/thumbnails/13.jpg)
24 | Sabre sawing | Endurance for Stainless Steel Best of Accessories | 3/2014 3/2014 | Best of Accessories Endurance for Stainless Steel | Sabre sawing | 25
NEW! Endurance for Stainless Steel for outstanding lifetime in high-alloy steels and steels with increased strength
Carbide TechnologyCapable of cutting through all tough stainless steels. Outstanding lifetime, even when cutting high-alloy steels with increased strength (650 – 1,000 MPa)
Precision-ground teethfor optimal cutting of stainless steel and high-alloy steel
Carbide stripIncreased stiffness provides stability and smooth sawing when cutting pipes and profiles
Stainless Steel
S 522 EHM
S 922 EHM
S 1022 EHM
Carbide tipped (bar), ground teethStainless steel sheets (1.5 – 4 mm), stainless steel pipes, profiles (< 50 mm), GFK / FRP (< 50 mm), cast iron (⌀ max 2"). Smooth sawing.
Carbide tipped (bar), ground teethStainless steel sheets (1.5 – 4 mm), stainless steel pipes, profiles (<100 mm), GFK / FRP (<100 mm), cast iron (⌀ max 3"). Smooth sawing.
Carbide tipped (bar), ground teethStainless steel sheets (1.5 – 4 mm), stainless steel pipes, profiles (< 150 mm), GFK / FRP (< 150 mm), cast iron (⌀ max 5"). Smooth sawing.
Product properties Ordering information
Stai
nles
s st
eel
shee
ts [m
m]
Stai
nles
s st
eel
pipe
s, p
rofil
es
[mm
]
GFK
/FRP
[m
m]
Cast
iron
, max
dia
.
[Inch
]
Dim
ensi
ons
L × W
× T
[mm
]
Part
num
ber
Pack
agin
g ty
pePa
ck q
uant
ityM
inim
um o
rder
quan
tity
Barc
ode
3 165
140 …
1.5 – 4 < 50 < 50 2 115 × 19 × 1 2 608 653 096 C1c 1 1 772 624
1.5 – 4 < 100 < 100 3 150 × 19 × 1 2 608 653 097 C1c 1 1 772 631
1.5 – 4 < 150 < 150 5 200 × 19 × 1 2 608 653 098 C1c 1 1 772 648
![Page 14: Best of Accessories...multi-cutter to do this job. However, they need to use the machine with reduced speed adjustments to protect it from getting damaged. The new C-Tec speed blade](https://reader034.fdocuments.us/reader034/viewer/2022042114/5e909afc25293c2e28177302/html5/thumbnails/14.jpg)
26 | Sabre sawing | Basic for Cast Iron Best of Accessories | 3/2014 3/2014 | Best of Accessories Basic for Cast Iron | Sabre sawing | 27
NEW! Basic for Cast Iron for reliable cuts through cast iron pipes
Carbide Technologyfor outstanding life in cast iron pipes and other abrasive materials
Special carbide gritReliable and particularly smooth sawing without jamming
Flexible blade bodyEspecially suited for jobs with limited space and for near-wall sawing
Cast Iron
S 1130 RF
Carbide-coated, Grit 30Cast iron pipes (⌀ max 2").
2 – 225 × 19 × 1.5 2 608 650 969 C1c 2 1 109 802
Cast
iron
, max
dia
.
[Inch
]
Toot
h sp
acin
g
[mm
] / T
PI
Dim
ensi
ons
L × W
× T
[mm
]
Part
num
ber
Pack
agin
g ty
pePa
ck q
uant
ityM
inim
um o
rder
quan
tity
Barc
ode
3 165
140 …
Product properties Ordering information
![Page 15: Best of Accessories...multi-cutter to do this job. However, they need to use the machine with reduced speed adjustments to protect it from getting damaged. The new C-Tec speed blade](https://reader034.fdocuments.us/reader034/viewer/2022042114/5e909afc25293c2e28177302/html5/thumbnails/15.jpg)
28 | Sabre sawing | Endurance for Fiber Plaster Best of Accessories | 3/2014 3/2014 | Best of Accessories Endurance for Fiber Plaster | Sabre sawing | 29
NEW! Endurance for Fiber Plaster for fast and clean cuts in drywall
Tapered tipEnables plunge cuts in drywall boards, e.g. for cut-outs
Ideal tooth pitch (6TPI)for clean cuts with clean edges, even in porous drywall boards
Ground teethfor fast, clean cuts
Carbide Technologyfor outstanding life in abrasive drywall elements, such as cement fiber boards
Carbide tipped (single tooth), side set, ground teethCement fiber board (< 100 mm), fiber cement panel (< 100 mm), gypsum plaster drywall board (< 100 mm), gypsum fiber drywall board (< 100 mm), insulation board with cement fiber coating (< 100 mm). Especially suited for abrasive materials.
S 641 HM
Cem
ent fi
ber
boar
d [m
m]
Fibe
r cem
ent
pane
l [m
m]
Gyp
sum
pla
ster
dryw
all b
oard
[mm
]
Gyp
sum
fibe
r
dryw
all b
oard
[mm
]
Insu
latio
n bo
ard
with
cem
ent fi
ber
coat
ing
[mm
]To
oth
spac
ing
[mm
] / T
PI
Dim
ensi
ons
L ×
W ×
T [m
m]
Part
num
ber
Pack
agin
g ty
pePa
ck q
uant
ityM
inim
um o
rder
quan
tity
Barc
ode
3 165
140 …
Product properties Ordering information
< 100 < 100 < 100 < 100 < 100 4.3 – 6 150 × 19 × 1.25 2 608 650 970 C1c 2 1 109 772
Fiber Plaster
![Page 16: Best of Accessories...multi-cutter to do this job. However, they need to use the machine with reduced speed adjustments to protect it from getting damaged. The new C-Tec speed blade](https://reader034.fdocuments.us/reader034/viewer/2022042114/5e909afc25293c2e28177302/html5/thumbnails/16.jpg)
30 | Sabre sawing | Endurance for Aerated Concrete Best of Accessories | 3/2014 3/2014 | Best of Accessories Endurance for Aerated Concrete | Sabre sawing | 31
NEW! Endurance for Aerated Concrete Ideal for porous concrete up to 350 mm thickness
Carbide Technologyfor outstanding life in aerated concrete
Ground teethfor fast, clean cuts
Large Gulletsfor efficient material removal
Optimized blade width and thicknessfor optimal stabillity when sawing
larger aerated concrete stones
Aerated Concrete
< 175 < 175 8.5 / 3 225 × 19 × 1.25 2 608 650 971 C1c 2 1 109 789
< 250 < 250 8.5 / 3 300 × 22 × 1.5 2 608 650 972 C1c 2 1 109 796
< 350 < 350 12.7 / 2 400 × 22 × 1.5 2 608 650 975 C1c 2 1 091 961
S 1141 HM
S 1241 HM
S 2041 HM
Aera
ted
co
ncre
te [m
m]
Bric
k [m
m]
Toot
h sp
acin
g
[mm
] / T
PI
Dim
ensi
ons
L × W
× T
[mm
]
Part
num
ber
Pack
agin
g ty
pePa
ck q
uant
ityM
inim
um o
rder
quan
tity
Barc
ode
3 165
140 …
Product properties Ordering information
Carbide tipped (single tooth), side set, ground teethAerated concrete (< 175 mm), brick (< 175 mm).
Carbide tipped (single tooth), side set, ground teethAerated concrete (< 250 mm), brick (< 250 mm).
Carbide tipped (single tooth), side set, ground teethAerated concrete (< 350 mm), brick (< 350 mm).
![Page 17: Best of Accessories...multi-cutter to do this job. However, they need to use the machine with reduced speed adjustments to protect it from getting damaged. The new C-Tec speed blade](https://reader034.fdocuments.us/reader034/viewer/2022042114/5e909afc25293c2e28177302/html5/thumbnails/17.jpg)
32 | Sabre sawing | Endurance for Brick Best of Accessories | 3/2014 3/2014 | Best of Accessories Endurance for Brick | Sabre sawing | 33
NEW! Endurance for Brick for easy and quick cuts through brick
Carbide Technologyfor outstanding life in vertical coring bricks and similarly extruded, blazed materials
Massive carbide teethfor higher robustness and longevity when cutting particularly hard construction materials
Cutting depth limiterprevents uncontrolled teeth engagement. For safe, steady sawing
Increased blade width & thicknessfor optimal stabillity and particularly straight cuts
Cut-outs in blade bodyWeight-reduced design for less fatigue and
vibration, even if used continiously
Endurance for Brick
S 1543 HM
Poro
ton
[mm
]
Bric
k [m
m]
Aera
ted
conc
rete
[mm
]
Toot
h sp
acin
g
[mm
] / T
PI
Dim
ensi
ons
L × W
× T
[mm
]
Part
num
ber
Pack
agin
g ty
pePa
ck q
uant
ityM
inim
um o
rder
quan
tity
Barc
ode
3 165
140 …
Product properties Ordering information
S 1243 HM
S 2243 HM
< 150 < 150 < 150 12.7 / 2 240 × 23 × 1.5 2 608 650 354 C1c 1 1 413 503
< 215 < 215 < 215 12.7 / 2 300 × 50 × 1.5 2 608 650 355 C1c 1 1 413 510
< 365 < 365 < 365 12.7 / 2 455 × 50 × 1.5 2 608 650 356 C1c 1 1 413 527
Carbide tipped (single tooth)Poroton (< 150 mm), brick (< 150 mm), aerated concrete (< 150 mm).
Carbide tipped (single tooth)Poroton (< 215 mm), brick (< 215 mm), aerated concrete (< 215 mm). Increased blade width for optimal stability.
Carbide tipped (single tooth)Poroton (< 365 mm), brick (< 365 mm), aerated concrete (< 365 mm). Increased blade width for optimal stability.
![Page 18: Best of Accessories...multi-cutter to do this job. However, they need to use the machine with reduced speed adjustments to protect it from getting damaged. The new C-Tec speed blade](https://reader034.fdocuments.us/reader034/viewer/2022042114/5e909afc25293c2e28177302/html5/thumbnails/18.jpg)
34 | Sabre sawing | Overview Best of Accessories | 3/2014 3/2014 | Best of Accessories Overview | Sabre sawing | 35
Always the right bladefor cutting the toughest materials Progressor for
Wood and MetalEndurance for Stainless Steel
Basic for Cast Iron Endurance for Fiber Plaster
Endurance for Aerated Concrete
Endurance for Brick
Can be cut with BiM
S 956 XHMS 1156 XHMS 1256 XHM
S 522 EHMS 922 EHMS 1022 EHM
S 1130 RF S 641 HM S 1141 HMS 1241 HMS 2041 HM
S 1543 HMS 1243 HMS 2243 HM
Wood with metal
Wood with soft nails Rm < 800 MPa ● ●
Wood with hardended nails Rm > 800 MPa ●
Wood with soft screws (e.g. strength class 6.8) Rm < 800 MPa DIN EN 20 898 ● ●
Wood with hardended screws (e.g. strength class 10.9) Rm > 800 MPa DIN EN 20 898 ●
Wood with stainless steel screws Rm > 800 MPa ●
Sandwich material (wood with steel sheet) Rm < 450 MPa ● ●
Sandwich material (wood with stainless steel sheet) Rm 450 – 750 MPa ●
Steel
Non-alloy steel with lower strength (e.g. St37/S235) Rm < 450 MPa DIN EN 10 025 ● ● ●
Non-alloy steel with higher strength (e.g. St52/S355) Rm 450 – 650 MPa DIN EN 10 025 ● ○ ●
Non-alloy heat-treatable steel (e.g. C45) Rm 650 – 850 MPa DIN EN 10 083 ○ ○ ●
Alloyed heat-treatable steel (e.g. 34CrNiMo6) Rm 850 – 1000 MPa DIN EN 10 083 ○ ●
Austenitic steel Type V2A (e.g. X5CrNi18-10) Rm 450 – 750 MPa DIN 17 440 ○ ○ ●
Austenitic steel Type V4A (e.g. X2CrNiMo17-13-2) Rm 450 – 750 MPa DIN 17 440 ○ ○ ●
Super austenitic steel (e.g. X1NiCrMoCu25-20-5) Rm 500 – 750 MPa DIN 17 440 ○ ●
Duplex steel (e.g. X2CrMnNiN21-5-1) Rm 600 – 900 MPa DIN 17 440 ○ ●
Cast iron
Cast steel with lower strength (e.g. GS38) Rm < 450 MPa DIN 1681 ○ ○ ○
Cast steel with higher strength (e.g. GS52) Rm 450 – 650 MPa DIN 1681 ○ ○ ○
Grey cast iron (ductile cast iron, nodular cast iron) Rm < 800 MPa DIN EN 1561/1563 ● ● ●
Drywall materials
Cement fiber board (e.g. Duripanel) ~ 1.250 kg/m3 ○ ○ ○ ●
Fiber cement panel (e.g. Eternit panel) DIN EN 12467 ○ ○ ○ ●
Gypsum plaster drywall board (e.g. original Rigips) without cellulose fiber ○ ○ ○ ●
Gypsum fiber drywall board (e.g. original Fermacell) with cellulose fiber ○ ○ ○ ●Insulation board with cement fiber coating (e.g. Wedi board) ○ ○ ○ ●
Aerated concrete
Aerated concrete (e.g. Ytong, Siporex)
compressive strength < 10 N/mm2density (dry) < 700 kg/m3
DIN EN 771-4 ○ ○ ● ○
Stone materials
Vertical coring brick (e.g. Poroton) compressive strength < 20 N/mm2
DIN EN 771-1DIN 105-100 ○ ●
Solid brickcompressive strength < 20 N/mm2 blazed light (900°C)
DIN 105-100 ○ ○ ●
Roof tile compressive strength < 20 N/mm2 blazed light (900°C)
○
Clinker compressive strength > 28 N/mm2 blazed heavy (1,200°C)
DIN 105-100 ○ ●
Fire-brick ~ 2,700 kg/m3 ● ●
Bernese sandstone ~ 2,200 kg/m3 ● ●
Gypsum > 680 kg/m3 ○ ○ ● ● ●
Mortar ○ ●
● Very suitable ○ Suitable
![Page 19: Best of Accessories...multi-cutter to do this job. However, they need to use the machine with reduced speed adjustments to protect it from getting damaged. The new C-Tec speed blade](https://reader034.fdocuments.us/reader034/viewer/2022042114/5e909afc25293c2e28177302/html5/thumbnails/19.jpg)
3/2014 | Best of Accessories SDS plus | Drilling | 37
SDS plus and SDS max hammer drill bits: The right solution based on your needs
SDS plus-7 3 × more holes in reinforced concrete
Standard4 cutter
Num
ber
of h
oles
*
SDS plus-7 4 + 1 cutter
* Tests by Bosch in standard concrete with 10 mm rebars
Full Tungsten Carbide HeadMade out of high quality hard metal for an exceptional lifetime
4+1 cutterThe central tungsten carbide cutter pre-drills the reinforcement in the concrete. The effectiveness of the 4 lateral tungsten carbide cutters increases drastically for highest demolition force
Benefits100 %
300 %
The innovation from Bosch: The only hammer drill bit with a 4+1 cutter and full tungsten carbide head. These features give the SDS plus-7 the highest demolition power – enabling it to cut through reinforced concrete without jamming.
▶ Now I can drill lots of holes without changing the bit. Even when hitting rebar, my drill bit's stability is unaffected
![Page 20: Best of Accessories...multi-cutter to do this job. However, they need to use the machine with reduced speed adjustments to protect it from getting damaged. The new C-Tec speed blade](https://reader034.fdocuments.us/reader034/viewer/2022042114/5e909afc25293c2e28177302/html5/thumbnails/20.jpg)
38 | Drilling | SDS plus Best of Accessories | 3/2014 3/2014 | Best of Accessories SDS plus | Drilling | 39
SDS plus-7 hammer drill bits SDS plus-7 hammer drill bits
▶ Suitable for masonry, concrete and reinforced concrete ▶ Appropriate for all rotary hammers with SDS plus/max holder
Diam
eter
(D)
[mm
]
Wor
king
leng
th
(L1)
[mm
]
Tota
l len
gth
(L2)
[mm
]
Part
num
ber
Pack
qua
ntity
Min
imum
ord
er
quan
tity
Barc
ode
3 165
140 …
Product properties Ordering information5.0 50 110 2 608 585 023 1 1 439 909
5.0 100 160 2 608 585 024 1 1 439 916
5.0 150 210 2 608 585 025 1 1 439 923
5.5 50 110 2 608 585 026 1 1 439 930
5.5 100 160 2 608 585 027 1 1 439 947
6.0 50 115 2 608 585 028 1 1 439 954
6.0 100 165 2 608 585 029 1 1 439 961
6.0 150 215 2 608 585 030 1 1 439 978
6.0 200 265 2 608 585 031 1 1 439 985
6.5 50 115 2 608 585 032 1 1 439 992
6.5 100 165 2 608 585 033 1 1 440 004
6.5 200 265 2 608 585 035 1 1 440 028
6.5 250 315 2 608 587 171 1 1 604 895
7.0 50 115 2 608 585 036 1 1 440 035
7.0 100 165 2 608 585 037 1 1 440 042
7.0 150 215 2 608 585 943 1 1 522 175
8.0 50 115 2 608 585 038 1 1 440 059
8.0 100 165 2 608 585 039 1 1 440 066
8.0 150 215 2 608 585 040 1 1 440 073
8.0 200 265 2 608 585 041 1 1 440 080
8.0 250 315 2 608 587 172 1 1 604 901
8.0 300 365 2 608 585 042 1 1 440 097
8.0 400 465 2 608 585 043 1 1 440 103
10.0 50 115 2 608 585 044 1 1 440 110
10.0 100 165 2 608 585 045 1 1 440 127
10.0 150 215 2 608 585 046 1 1 440 134
10.0 200 265 2 608 585 047 1 1 440 141
10.0 250 315 2 608 587 173 1 1 604 918
10.0 300 365 2 608 585 048 1 1 440 158
10.0 400 465 2 608 585 049 1 1 440 165
12.0 100 165 2 608 585 050 1 1 440 172
12.0 150 215 2 608 585 051 1 1 440 189
12.0 200 265 2 608 585 052 1 1 440 196
12.0 300 365 2 608 585 053 1 1 440 202
12.0 400 465 2 608 585 054 1 1 440 219 Di
amet
er (D
) [m
m]
Wor
king
leng
th
(L1)
[mm
]
Tota
l len
gth
(L2)
[mm
]
Part
num
ber
Pack
qua
ntity
Min
imum
ord
er
quan
tity
Barc
ode
3 165
140 …
Product properties Ordering information14.0 100 165 2 608 585 944 1 1 522 182
14.0 150 215 2 608 585 945 1 1 522 199
14.0 200 265 2 608 585 946 1 1 522 205
14.0 300 365 2 608 585 947 1 1 522 212
14.0 400 465 2 608 585 948 1 1 522 229
15.0 100 165 2 608 587 178 1 1 605 601
15.0 200 265 2 608 587 179 1 1 605 618
16.0 150 215 2 608 587 180 1 1 605 625
16.0 200 265 2 608 587 181 1 1 605 632
16.0 400 465 2 608 587 182 1 1 605 649
18.0 200 250 2 608 586 719 1 1 564 434
18.0 400 450 2 608 586 720 1 1 564 441
20.0 200 250 2 608 586 721 1 1 564 458
20.0 400 450 2 608 586 722 1 1 564 465
22.0 200 250 2 608 586 723 1 1 564 472
22.0 400 450 2 608 586 724 1 1 564 489
24.0 400 450 2 608 586 725 1 1 564 496
25.0 400 450 2 608 586 726 1 1 564 502
28.0 400 450 2 608 586 727 1 1 564 519
30.0 400 450 2 608 586 728 1 1 564 526
![Page 21: Best of Accessories...multi-cutter to do this job. However, they need to use the machine with reduced speed adjustments to protect it from getting damaged. The new C-Tec speed blade](https://reader034.fdocuments.us/reader034/viewer/2022042114/5e909afc25293c2e28177302/html5/thumbnails/21.jpg)
40 | Drilling | SDS plus Best of Accessories | 3/2014 3/2014 | Best of Accessories SDS plus | Drilling | 41
SDS plus-3 Long lifetime in concrete
The SDS plus-3 hammer drill bit, with a high durable carbide 2-cutter, is made for all standard applications in concrete. Due to the 4-flute dura design and the good wear resistance, reliability is guaranteed.
2 cutterMade of high durable tungsten carbide for a long lifetime and good wear resistance
Centering tipfor a precise driling start and good guidance in the drilled hole
4-flute dura designReinforced core section for better wear resistance and stability when drilling in concrete
SDS plus-3 hammer drill bits
▶ Suitable for masonry, concrete ▶ Appropriate for all rotary hammers with SDS plus holder
4.0 50 110 2 608 831 000 1 1 209313
4.0 100 160 2 608 831 001 1 1 209320
5.0 50 110 2 608 831 002 1 1 209337
5.0 100 160 2 608 831 003 1 1 209344
5.0 150 210 2 608 831 004 1 1 209351
5.5 50 110 2 608 831 005 1 1 209368
5.5 100 160 2 608 831 006 1 1 209375
6.0 50 110 2 608 831 007 1 1 209382
6.0 100 160 2 608 831 008 1 1 209399
6.0 150 210 2 608 831 009 1 1 209405
6.0 150 210 2 608 831 010 1 1 209412
6.5 50 110 2 608 831 011 1 1 209429
6.5 100 160 2 608 831 012 1 1 209436
6.5 150 210 2 608 831 013 1 1 209443
6.5 200 260 2 608 831 014 1 1 209450
7.0 50 110 2 608 831 015 1 1 209467
7.0 100 160 2 608 831 016 1 1 209474
7.0 150 210 2 608 831 017 1 1 209481
8.0 50 110 2 608 831 018 1 1 209498
8.0 100 160 2 608 831 019 1 1 209504
8.0 150 210 2 608 831 020 1 1 209511
8.0 200 260 2 608 831 021 1 1 209528
8.0 400 460 2 608 831 022 1 1 209535
9.0 100 160 2 608 831 023 1 1 209542
10.0 50 110 2 608 831 024 1 1 209559
10.0 100 160 2 608 831 025 1 1 209566
10.0 150 210 2 608 831 026 1 1 209573
10.0 200 260 2 608 831 027 1 1 209580
10.0 250 310 2 608 831 028 1 1 209597
10.0 300 360 2 608 831 029 1 1 209603
10.0 400 460 2 608 831 030 1 1 209610
11.0 100 160 2 608 831 031 1 1 209627
▶ With the SDS plus-3, I have a reliable drill for little money
Benefits
Diam
eter
(D)
[mm
]
Wor
king
leng
th
(L1)
[mm
]
Tota
l len
gth
(L2)
[mm
]
Part
num
ber
Pack
qua
ntity
Min
imum
ord
er
quan
tity
Barc
ode
6 949
509 …
Product properties Ordering information
![Page 22: Best of Accessories...multi-cutter to do this job. However, they need to use the machine with reduced speed adjustments to protect it from getting damaged. The new C-Tec speed blade](https://reader034.fdocuments.us/reader034/viewer/2022042114/5e909afc25293c2e28177302/html5/thumbnails/22.jpg)
3/2014 | Best of Accessories SDS max | Drilling | 4342 | Drilling | SDS plus Best of Accessories | 3/2014
12.0 100 160 2 608 831 032 1 1 209634
12.0 150 210 2 608 831 033 1 1 209641
12.0 200 260 2 608 831 034 1 1 209658
12.0 300 360 2 608 831 035 1 1 209665
12.0 400 460 2 608 831 036 1 1 209672
13.0 100 160 2 608 831 037 1 1 209689
14.0 100 160 2 608 831 038 1 1 209696
14.0 150 210 2 608 831 039 1 1 209702
14.0 200 260 2 608 831 040 1 1 209719
14.0 300 360 2 608 831 041 1 1 209726
14.0 400 460 2 608 831 042 1 1 209733
15.0 100 160 2 608 831 043 1 1 209740
16.0 150 210 2 608 831 044 1 1 209757
16.0 250 310 2 608 831 045 1 1 209764
16.0 300 360 2 608 831 046 1 1 209771
16.0 400 460 2 608 831 047 1 1 209788
18.0 150 200 2 608 831 048 1 1 209795
18.0 250 300 2 608 831 049 1 1 209801
18.0 300 350 2 608 831 050 1 1 209818
18.0 400 450 2 608 831 051 1 1 209825
20.0 150 200 2 608 831 052 1 1 209832
20.0 250 300 2 608 831 053 1 1 209849
20.0 300 350 2 608 831 054 1 1 209856
20.0 400 450 2 608 831 055 1 1 209863
SDS plus-3 hammer drill bits
Benefits
▶ With the SDS max-4, I can get a well performing drill at an affordable price
SDS max-4 Long lifetime in concrete
The SDS max-4 hammer drill bit, with a high durable carbide 4-cutter, is made for all standard applications in concrete and reinforced concrete. Due to the 2-flute U-shape design and the good wear resistance, reliability is guaranteed.
4-cutter, vacuum brazing and hardeningFor a precise driling start and good guidance in the drilled hole
2-flute U-shapeStandard lifetime / Good dust removal
High durable carbideGood lifetime /
wear resistance
Diam
eter
(D)
[mm
]
Wor
king
leng
th
(L1)
[mm
]
Tota
l len
gth
(L2)
[mm
]
Part
num
ber
Pack
qua
ntity
Min
imum
ord
er
quan
tity
Barc
ode
6 949
509 …
Product properties Ordering information
![Page 23: Best of Accessories...multi-cutter to do this job. However, they need to use the machine with reduced speed adjustments to protect it from getting damaged. The new C-Tec speed blade](https://reader034.fdocuments.us/reader034/viewer/2022042114/5e909afc25293c2e28177302/html5/thumbnails/23.jpg)
D
L1
L2
3/2014 | Best of Accessories Accessories for multi-cutters | Promotions | 4544 | Drilling | SDS max Best of Accessories | 3/2014
SDS max-4 hammer drill bits
▶ Suitable for masonry, concrete and reinforced concrete ▶ Can be used in all rotary hammers with SDS max/plus holder ▶ Price/performance optimised 4-cutter
16 200 340 2 608 685 860 1 1 564113
16 400 540 2 608 685 861 1 1 564120
18 200 340 2 608 685 862 1 1 564137
18 400 540 2 608 685 863 1 1 564144
20 200 320 2 608 685 864 1 1 564151
20 400 520 2 608 685 865 1 1 564168
22 200 320 2 608 685 866 1 1 564175
22 400 520 2 608 685 867 1 1 564182
25 200 320 2 608 685 868 1 1 564199
25 400 520 2 608 685 869 1 1 564205
28 200 320 2 608 685 870 1 1 564229
28 400 520 2 608 685 871 1 1 564236
30 200 320 2 608 685 872 1 1 564243
30 400 520 2 608 685 873 1 1 564250
32 200 320 2 608 685 874 1 1 564267
32 400 520 2 608 685 875 1 1 564274
35 400 520 2 608 685 876 1 1 564281
40 400 520 2 608 685 877 1 1 564298
AIZ 32 ALB BIM 32 × 70
2 608 662 313 1 1 773348 XX.XX XX.XX*
2 608 662 314 5 1 773355 XX.XX XX.XX*
2 608 662 315 1 25 773362 XX.XX XX.XX*
AIZ 32 BLC HCS 32 × 70
2 608 662 309 1 1 773300 XX.XX XX.XX*
2 608 662 310 5 1 773317 XX.XX XX.XX*
2 608 662 311 1 25 773324 XX.XX XX.XX*
NEW! C-Tec Speed long plunge-cutting saw blades – order any C-Tec Speed innovations and get 15 % off
BIM C-Tec Speed long plunge-cutting saw blade Wood and Metal
HCS C-Tec Speed long plunge-cutting saw blade Wood
– 15 %
Type
Mat
eria
l
Dim
ensi
ons
[mm
]
Part
num
ber
Pack
qua
ntity
Min
imum
ord
er
quan
tity
Barc
ode
3 165
140 …
Stan
dard
pric
e
with
out V
AT
Spec
ial p
rice
with
out V
AT
Product properties Ordering information
Type
Mat
eria
l
Dim
ensi
ons
[mm
]
Part
num
ber
Pack
qua
ntity
Min
imum
ord
er
quan
tity
Barc
ode
3 165
140 …
Stan
dard
pric
e
with
out V
AT
Spec
ial p
rice
with
out V
AT
Product properties Ordering information
Diam
eter
(D)
[mm
]
Wor
king
leng
th
(L1)
[mm
]
Tota
l len
gth
(L2)
[mm
]
Part
num
ber
Pack
qua
ntity
Min
imum
ord
er
quan
tity
Barc
ode
3 165
140 …
Product properties Ordering information
* valid till 31.12.2014
* valid till 31.12.2014
![Page 24: Best of Accessories...multi-cutter to do this job. However, they need to use the machine with reduced speed adjustments to protect it from getting damaged. The new C-Tec speed blade](https://reader034.fdocuments.us/reader034/viewer/2022042114/5e909afc25293c2e28177302/html5/thumbnails/24.jpg)
46 | Promotions | Accessories for multi-cutters Best of Accessories | 3/2014 3/2014 | Best of Accessories Accessories for multi-cutters | Promotions | 47
NEW! Innovations also available in FEIN Supercut interface – order any blade for Supercut and get 15 % discount
NEW! Basic Sets for promotional activities – in an attractive POS box – order any Basic Set and get 10 % discount
– 15 %
SAIZ 65 BB BIM 65 × 40 2 608 662 036 1 25 717618 XX.XX XX.XX*
SAIZ 65 BSB BIM 65 × 40 2 608 662 037 1 25 717625 XX.XX XX.XX*
SAIZ 28 EB BIM 28 × 50 2 608 662 038 1 25 717632 XX.XX XX.XX*
SAIZ 32 BB BIM 32 × 40 2 608 662 039 1 25 717649 XX.XX XX.XX*
SAIZ 32 EC HCS 32 × 40 2 608 662 040 1 25 717656 XX.XX XX.XX*
SACZ 100 BB BIM ⌀ 100 2 608 662 041 1 1 717663 XX.XX XX.XX*
SACI 85 EB BIM-TIN ⌀ 85 2 608 662 042 1 1 717670 XX.XX XX.XX*
SACZ 85 RT Carbide ⌀ 85 2 608 662 043 1 1 717687 XX.XX XX.XX*
SAVZ 70 RT Carbide ⌀ 70 2 608 662 044 1 1 717694 XX.XX XX.XX*
SATZ 52 SFC HCS 52 × 45 2 608 662 046 1 25 717717 XX.XX XX.XX*
SAIZ 32 BLC HCS 32 × 70 2 608 662 312 1 25 773331 XX.XX XX.XX*
SAIZ 32 ALB BIM 32 × 70 2 608 662 316 1 25 773379 XX.XX XX.XX*
SAIZ 32 ALT Carbide 32 × 70 2 608 662 317 1 25 773386 XX.XX XX.XX*
SAIZ 32 EPB BIM 32 × 50 2 608 662 350 1 25 784887 XX.XX XX.XX*
SAIZ 32 BPB BIM 32 × 40 2 608 662 351 1 25 784894 XX.XX XX.XX*
SAIZ 32 EPC HCS 32 × 40 2 608 662 352 1 25 784900 XX.XX XX.XX*
SAIZ 32 AT Carbide 32 × 40 2 608 662 353 1 25 784917 XX.XX XX.XX*
SAII 32 SLC HCS 32 × 90 2 608 662 374 1 25 787505 XX.XX XX.XX*
Type
Mat
eria
l
Dim
ensi
ons
[mm
]
Part
num
ber
Pack
qua
ntity
Min
imum
ord
er
quan
tity
Barc
ode
3 165
140 …
Stan
dard
pric
e
with
out V
AT
Spec
ial p
rice
with
out V
AT
Product properties Ordering information
* valid till 31.12.2014
Carbide Technology segment saw blade – – 85
2 608 662 342 3 10 779 647 XX.XX XX.XX*HCS Scraper 52 26 –
BIM plunge-cutting saw blade 20 20 –
HCS segment saw blade – – 85
2 608 662 343 3 10 779 654 XX.XX XX.XX*HCS Scraper 32 40 –
BIM plunge-cutting saw blade 20 20 –
Type
Wid
th
[mm
]
Leng
ht[m
m]
Diam
eter
[m
m]
Part
num
ber
Pack
qua
ntity
Min
imum
ord
er
quan
tity
Barc
ode
3 165
140 …
Stan
dard
pric
e
with
out V
AT
Spec
ial p
rice
with
out V
AT
Type
Wid
th
[mm
]
Leng
ht[m
m]
Diam
eter
[m
m]
Part
num
ber
Pack
qua
ntity
Min
imum
ord
er
quan
tity
Barc
ode
3 165
140 …
Stan
dard
pric
e
with
out V
AT
Spec
ial p
rice
with
out V
AT
Product properties
Product properties
Ordering information
Ordering information
– 10 %
Display OMT Basic Wood Set
Display OMT Basic Tile Set
SAIZ 65 BB
SACZ 100 BB
SAIZ 32 EPB SAIZ 32 BPB
SAIZ 32 EPC SAIZ 32 AT SAII 32 SLC
SAIZ 32 ALT
SACI 85 EB SACZ 85 RT SATZ 52 SFC
SAIZ 32 BLC SAIZ 32 ALB
SAVZ 70 RT
SAIZ 65 BSB SAIZ 28 EB SAIZ 32 BB SAIZ 32 EC
* valid till 31.12.2014
* valid till 31.12.2014
![Page 25: Best of Accessories...multi-cutter to do this job. However, they need to use the machine with reduced speed adjustments to protect it from getting damaged. The new C-Tec speed blade](https://reader034.fdocuments.us/reader034/viewer/2022042114/5e909afc25293c2e28177302/html5/thumbnails/25.jpg)
3/2014 | Best of Accessories Drilling | Promotions | 4948 | Promotions | Sabre sawing Best of Accessories | 3/2014
NEW! Sabre Saw blades with Carbide Technology – order any Carbide innovations and get 15 % discount
– 15 %
S 522 EHM Carbide 115 2 608 653 096 1 1 772624 XX.XX XX.XX*
S 922 EHM Carbide 150 2 608 653 097 1 1 772631 XX.XX XX.XX*
S 1022 EHM Carbide 200 2 608 653 098 1 1 772648 XX.XX XX.XX*
Type
Mat
eria
l
Leng
th
[mm
]
Part
num
ber
Pack
qua
ntity
Min
imum
ord
er
quan
tity
Barc
ode
3 165
140 …
Stan
dard
pric
e
with
out V
AT
Spec
ial p
rice
with
out V
AT
Product properties Ordering information
S 956 XHM Carbide 150 2 608 653 099 1 1 772976 XX.XX XX.XX*
S 1156 XHM Carbide 225 2 608 653 100 1 1 772983 XX.XX XX.XX*
S 1256 XHM Carbide 300 2 608 653 101 1 1 772990 XX.XX XX.XX*
Type
Mat
eria
l
Leng
th
[mm
]
Part
num
ber
Pack
qua
ntity
Min
imum
ord
er
quan
tity
Barc
ode
3 165
140 …
Stan
dard
pric
e
with
out V
AT
Spec
ial p
rice
with
out V
AT
Product properties Ordering information
Endurance for Stainless Steel
Progressor for Wood and Metal
S 522 EHM
S 922 EHM
S 1022 EHM
S 956 XHM
S 1156 XHM
S 1256 XHM
* valid till 31.12.2014
* valid till 31.12.2014
Special offer SDS plus range Up to – 10 %
SDS plus-7 hammer drill bits
▶ Suitable for masonry, concrete and reinforced concrete ▶ Appropriate for all rotary hammers with SDS plus/max holder
Diam
eter
(D)
[mm
]
Wor
king
leng
th
(L1)
[mm
]
Tota
l len
gth
(L2)
[mm
]
Part
num
ber
Pack
qua
ntity
Min
imum
ord
er
quan
tity
Barc
ode
3 165
140 …
Stan
dard
pric
e
with
out V
AT
Product properties Ordering information5.0 50 110 2 608 585 023 1 1 439 909
5.0 100 160 2 608 585 024 1 1 439 916
5.0 150 210 2 608 585 025 1 1 439 923
5.5 50 110 2 608 585 026 1 1 439 930
5.5 100 160 2 608 585 027 1 1 439 947
6.0 50 115 2 608 585 028 1 1 439 954
6.0 100 165 2 608 585 029 1 1 439 961
6.0 150 215 2 608 585 030 1 1 439 978
6.0 200 265 2 608 585 031 1 1 439 985
6.5 50 115 2 608 585 032 1 1 439 992
6.5 100 165 2 608 585 033 1 1 440 004
6.5 200 265 2 608 585 035 1 1 440 028
6.5 250 315 2 608 587 171 1 1 604 895
7.0 50 115 2 608 585 036 1 1 440 035
7.0 100 165 2 608 585 037 1 1 440 042
7.0 150 215 2 608 585 943 1 1 522 175
8.0 50 115 2 608 585 038 1 1 440 059
8.0 100 165 2 608 585 039 1 1 440 066
8.0 150 215 2 608 585 040 1 1 440 073
8.0 200 265 2 608 585 041 1 1 440 080
8.0 250 315 2 608 587 172 1 1 604 901
8.0 300 365 2 608 585 042 1 1 440 097
8.0 400 465 2 608 585 043 1 1 440 103
10.0 50 115 2 608 585 044 1 1 440 110
10.0 100 165 2 608 585 045 1 1 440 127
10.0 150 215 2 608 585 046 1 1 440 134
10.0 200 265 2 608 585 047 1 1 440 141
10.0 250 315 2 608 587 173 1 1 604 918
10.0 300 365 2 608 585 048 1 1 440 158
10.0 400 465 2 608 585 049 1 1 440 165
12.0 100 165 2 608 585 050 1 1 440 172
12.0 150 215 2 608 585 051 1 1 440 189
12.0 200 265 2 608 585 052 1 1 440 196
12.0 300 365 2 608 585 053 1 1 440 202
12.0 400 465 2 608 585 054 1 1 440 219
![Page 26: Best of Accessories...multi-cutter to do this job. However, they need to use the machine with reduced speed adjustments to protect it from getting damaged. The new C-Tec speed blade](https://reader034.fdocuments.us/reader034/viewer/2022042114/5e909afc25293c2e28177302/html5/thumbnails/26.jpg)
3/2014 | Best of Accessories Notes | 5150 | Promotions | Drilling Best of Accessories | 3/2014
SDS plus-7 hammer drill bits
Get up to – 10 % volume discountfor the listed SDS plus-7 drill bits
Order quantity
Volume discount
5 – 2 %10 – 5 %25 – 10 %
Diam
eter
(D)
[mm
]
Wor
king
leng
th
(L1)
[mm
]
Tota
l len
gth
(L2)
[mm
]
Part
num
ber
Pack
qua
ntity
Min
imum
ord
er
quan
tity
Barc
ode
3 165
140 …
Stan
dard
pric
e
with
out V
AT
Product properties Ordering information14.0 100 165 2 608 585 944 1 1 522 182
14.0 150 215 2 608 585 945 1 1 522 199
14.0 200 265 2 608 585 946 1 1 522 205
14.0 300 365 2 608 585 947 1 1 522 212
14.0 400 465 2 608 585 948 1 1 522 229
15.0 100 165 2 608 587 178 1 1 605 601
15.0 200 265 2 608 587 179 1 1 605 618
16.0 150 215 2 608 587 180 1 1 605 625
16.0 200 265 2 608 587 181 1 1 605 632
16.0 400 465 2 608 587 182 1 1 605 649
18.0 200 250 2 608 586 719 1 1 564 434
18.0 400 450 2 608 586 720 1 1 564 441
20.0 200 250 2 608 586 721 1 1 564 458
20.0 400 450 2 608 586 722 1 1 564 465
22.0 200 250 2 608 586 723 1 1 564 472
22.0 400 450 2 608 586 724 1 1 564 489
24.0 400 450 2 608 586 725 1 1 564 496
25.0 400 450 2 608 586 726 1 1 564 502
28.0 400 450 2 608 586 727 1 1 564 519
30.0 400 450 2 608 586 728 1 1 564 526