BendPak / Ranger Catalog
-
Upload
derek-taylor -
Category
Documents
-
view
212 -
download
0
description
Transcript of BendPak / Ranger Catalog
The B
enchmark o
f Quality
TM
© 2
011
Ben
dP
ak, I
nc. •
Ben
dP
ak, I
nc. i
s a
reg
iste
red
tra
dem
ark.
This is my BendPak
Scan To WaTch The video noW
There are many, but this one’s mine.“If you’re going to put your wheels through hell, be sure you’ve got the rock-solid muscle to bring them back to life. BendPak lifts are built as ruthless as the road itself. Never compromise.”
– Bill Goldberg, Professional Athlete & TV Host @Goldberg
Table of ContentsBendPak / Ranger
Medium-Duty Clear Floor LiftsMedium-Heavy Floor Plate LiftsHeavy-Duty Clear Floor Lifts4-Post Light-Duty Lifts4-Post Standard Lifts4-Post Heavy-Duty LiftsAlignment LiftsJesse James AdvertisementImage GalleryQuatra Scissors Scissors & Low-Mid RiseParking & StorageRolling Bridge JacksPortable Column LiftPipe BendersAir CompressorsTire Changer AdvertisementImage GalleryTire ChangersTire RepairWheel Balancer / Wheel Aligner / Brake LathesFloor Jacks / Transmission JacksJacks StandsMotorcycle LiftsTool StorageWork BenchesCarts & DolliesHose ReelsOil Drains / Oil Filter CrushersParts WasherSmall Material Bender / Rolling Creeper / Work Seat / Tire ChangersEngine Support / Engine Stand / Shop CraneManufacturing Superiority
4-56-78-9
10-1112-1314-1516-17
1819
20-2122-2324-25
2627
28-2930-31
3233
34-353637
38-3940414243444546474849
50-51
All information presented herein is subject to change without notice. Product images may reflect optional equipment and are subject to change without notice. Some equipment and/or features may be unavailable at time of order. Actual products may differ or vary. In no event shall BendPak be liable for incidental damage or other economic consequential damages related to incorrect information presented herein.
Equ
ipm
ent m
odel
s sh
own
in th
is c
atal
og m
ay b
e av
aila
ble
in d
iffer
ent v
olta
ges
upon
requ
est.
Medium-Duty Clear FloorXPR Series Features & Specifications
•Wideornarrowconfiguration•Exclusive“Tru-Metric”arms•Single-pointsafetyrelease•Dual“Direct-Drive”cylinders•Electric/hydraulicpower•17”x19”A36steelbaseplate•UHMWpolyethylenebearings
•Dual3”-spacedsafetylocks•Automaticarmrestraints•Heavy-dutyaircraftcable•Oversizedsheavediameter•Paddedsafety-shutoffbar•8-piecetruckandvanadapters•Triple-telescoping/low-proarms
•Contactpads•Stackableadapters•Single-piececolumns•Triple-telescopingarms•Accommodatesawidevariety ofvehiclesassemblies•Safetylocksineachcolumn
XPR-7TRTurf Lift
Lifting Capacity - 7,000 lbs. Max. Lift - 73”
Width - 145” / Height - 145”
XPR-10Clear Floor
Lifting Capacity - 10,000 lbs.Max. Lift - 73”
Width - 132” or 145” / Height - 145”
XPR-10AAsymmetric
Lifting Capacity - 10,000 lbs.Max. Lift - 73”
Width - 132” or 145” / Height - 145”
SERIES FEATURES:
XPR-10A Arms shown with optional foot guards
XPR-10-168Clear Floor Extended Height
XPR-10A-168Asymmetric Extended Height
Features bolt-on top extension for added
24” clearance
4 1645 Lemonwood Drive • Santa Paula, CA USA 93060 • Tel: 1-805-933-9970 For full product details and specifications, please visit www.bendpak.com
Steel Lift Pads Offset Adapters Air / Electric Work StationFrame Cradle Pads
• Heavy-duty 1/2” aircraft quality equalizer cables
• Safety locks every 3”
ACCESSORIES:
Adjustable WidthCan be installed in either wide or narrow configurations
XPR-10AShown with air / electric work station and foot guards
FREE truck and van adapters come standard with all BendPak 2-post lifts
Dual hydraulic direct-drive cylinders
Padded overhead safety shutoff bar
Oversized cable sheave diameter reduces cable fatigue
Single point safety release
Automatic arm restraints
Triple-telescoping arm design
Versatile drop-in contact pads
UHMW polyethylene bearing system
51645 Lemonwood Drive • Santa Paula, CA USA 93060 • Tel: 1-805-933-9970
6
Medium-Heavy Floor PlateXPR Series Features & Specifications
XPR-7TRFFloor Plate Turf Lift
Lifting Capacity - 7,000 lbs.Max. Lift - 73”
Width - 145” / Height - 145”
XPR-9DDirect-Drive Floor Plate
Lifting Capacity - 9,000 lbs.Max. Lift - 73”
Width - 132” or 145” / Height - 145”
XPR-12FDHeavy-Duty Floor Plate
Lifting Capacity - 12,000 lbs.Max. Lift - 74”
Width - 155” / Height - 144”
•Adjustablewidthdesign•Dualhydraulicliftingcylinders•Single-piececolumns•Singlepointsafetyrelease•Drop-endarms•Triple-telescopingarms•Electric/hydraulicsystem
•UHMWpolyethylenebearings•Dual3”-spacedsafetylocks•Automaticarmrestraints•8-piecetruckandvanadapter•Adjustablewideornarrowdrive-thru configurations•Versatiledropincontactpads
•Durablepowdercoatfinish•Opentopdesign•Largesteelbaseplates•Heavy-duty3/8”equalizercables•Ruggedsteelconstruction
XPR-9Shorty Floor Plate
Lifting Capacity - 9,000 lbs.Max. Lift - 76”
Width - 132” or 145” / Height - 113”
SERIES FEATURES:
FREE truck and van adapters come standard with all BendPak 2-post lifts
1645 Lemonwood Drive • Santa Paula, CA USA 93060 • Tel: 1-805-933-9970
Arms shown with optional foot guards
For full product details and specifications, please visit www.bendpak.com
7
ACCESSORIES:
Low profile floor plate
XPR-9DShown with air / electric work station and foot guards
Triple-telescoping arm design
Versatile drop-in contact pads
Dual hydraulic direct-drive cylinders
Single point safety release
Steel Lift Pads Offset Adapters Air / Electric Work StationFrame Cradle Pads
Oversized cable sheave diameter reduces cable fatigue
• Heavy-duty dual 3/8” equalizer cables
• Safety locks every 3”
Automatic arm restraints
UHMW polyethylene bearing system
1645 Lemonwood Drive • Santa Paula, CA USA 93060 • Tel: 1-805-933-9970
8
Heavy-Duty Clear FloorXPR Series Features & Specifications
•Dual-Synchroequalizationsystem•Electric/hydraulicpowersystem•UHMWpolyethylenebearings•Singlepiececolumns•Dual“Direct-Drive”cylinders•Singlepointsafetyrelease•Automaticarmrestraints
•8-piecetruckandvanadapters•Oversizedcolumnbaseplates•Paddedsafety-shutoffbar•Safetylocksineachcolumn•Heavy-duty1/2”equalizercables•Versatiledropincontactpadswith convenientstorage
•Triple-telescopingarms/XPR-12C•Powdercoatfinish•Rubberdoorbumpers•Oversizedbaseplates
XPR-12C
Lifting Capacity - 12,000 lbs.Max. Lift - 74”
Width - 155” / Height - 170”
XPR-15C
Lifting Capacity - 15,000 lbs.Max. Lift - 74”
Width - 155” / Height - 170”
XPR-18C
Lifting Capacity - 18,000 lbs.Max. Lift - 74”
Width - 155” / Height - 170”
SERIES FEATURES:
1645 Lemonwood Drive • Santa Paula, CA USA 93060 • Tel: 1-805-933-9970 For full product details and specifications, please visit www.bendpak.com
9
Frame Cradle Pads Steel Lift Pads Air / Electric Work StationMobile High-Lift Jack Stand
ACCESSORIES:
XPR-15CShown with air / electric
work station and foot guards
• Heavy-duty 1/2”aircraft-quality equalizer cables
• Safety locks every 3”
Dual hydraulic direct-drive cylinders
Single point safety release
UHMW polyethylene bearing system
Padded overhead safety shutoff bar
Durable rubber lift pads
Automatic arm restraints
Oversized cable sheave diameter reduces cable fatigue
XPR-12C-192XPR-15C-192XPR-18C-192Features bolt on top extension for added 24” clearance
FREE truck and van adapters come standard with all BendPak 2-post lifts
Adapter storage
Oversized A36 steel base plates
1645 Lemonwood Drive • Santa Paula, CA USA 93060 • Tel: 1-805-933-9970
10
4-Post Light-DutyhdS Series Features & Specifications
HD-7500BLBoat Storage
Lifting Capacity - 7,500 lbs.Max. Lift - 70” / Runway Length - 164”
Width - 132” / Length - 200”
HD-7PXW Super Tall
Lifting Capacity - 7,000 lbs.Max. Lift - 140” / Runway Length - 188”
Width - 117” / Length - 224”
HD-7PNarrow
Lifting Capacity - 7,000 lbs.Max. Lift - 82” / Runway Length - 164”
Width - 100” / Length - 189”
SERIES FEATURES:
HD-7WWide
Lifting Capacity - 7,000 lbs.Max. Lift - 82” / Runway Length - 164”
Width - 117” / Length - 189”
1645 Lemonwood Drive • Santa Paula, CA USA 93060 • Tel: 1-805-933-9970
•Runwaysfeaturenon-skidsurface•Singlehydrauliccylinderunderramp•Fullyenclosedliftingcables,safety locks,&sheaves•Pneumaticpush-buttonsafetyrelease•Features1-1/4”sheaveaxles•Featuresheavy-duty3/8”aircraftcable
•Internal“anti-sway”sliderblocksin eachcolumn•Electric/hydraulicpowersystem•Oversizedsheavediameters•Rugged,self-lubricatingcablesheaves•Multi-positionsafetylocksincolumns•Dual-positionpowerunitlocations
•Redundantslack-cablesafetylatches•Fullyadjustablelocklevelingstops•Drivethroughrampsoptionavailable•36”approachrampsavailable•Durablepowdercoatfinish•Ruggedsteelconstruction
For full product details and specifications, please visit www.bendpak.com
HD-7500BLXBoat Storage
Lifting Capacity - 7,500 lbs.Max. Lift - 82” / Runway Length - 188”
Width - 132” / Length - 224”
HD-7500BL
HD-9
Jack Platform
11
HD-7PXW
ACCESSORIES:
Aluminum Deck Drip TraysRJ-45 Rolling Bridge JackAir / Electric Work Station
Rugged 1-1/4” roller axles
Electric / hydraulic power system with a push button pneumatic safety release
Runways feature non-skid surface
Heavy-duty 3/8”aircraft cables
140” Lifting Height
Adjustable lock ladders
Internal anti-sway slider blocks
Oversized self-lubricating cable sheaves
High lifting speed
1645 Lemonwood Drive • Santa Paula, CA USA 93060 • Tel: 1-805-933-9970
12
4-Post StandardhdS Series Features & Specifications
•Freestandingorbolt-downdesign•Runwaysfeaturenon-skidsurface•Singlehydrauliccylinderunderramp•Fullyenclosedliftingcables,safety locks,&sheaves•Pneumaticpush-buttonsafetyrelease•Features1-1/4”sheaveaxles
•Internal“anti-sway”sliderblocksin eachcolumn•Featuresheavy-duty3/8”aircraftcable•Longerrampsforlowground clearancevehicles•Oversizedsheavediameters•Rugged,self-lubricatingcablesheaves
•Multi-positionsafetylocksincolumns•Dual-positionpowerunitlocations•Redundantslack-cablesafetylatches•Fullyadjustablelocklevelingstops•Drivethroughrampsoptionavailable•36”approachrampsavailable
HD-9STNarrow Standard
Lifting Capacity - 9,000 lbs.Max. Lift - 70” / Runway Length - 164”
Width - 100” / Length - 200”
HD-9STXNarrow Tall Long
Lifting Capacity - 9,000 lbs.Max. Lift - 82” / Runway Length - 188”
Width - 100” / Length - 224”
HD-9Wide Standard
Lifting Capacity - 9,000 lbs.Max. Lift - 70” / Runway Length - 164”
Width - 117” / Length - 200”
HD-9XWWide Tall Long
Lifting Capacity - 9,000 lbs.Max. Lift - 82” / Runway Length - 188”
Width - 117” / Length - 224”
SERIES FEATURES:
HD-9XLWide Standard Long
Lifting Capacity - 9,000 lbs.Max. Lift - 70” / Runway Length - 188”
Width - 117” / Length - 224”
1645 Lemonwood Drive • Santa Paula, CA USA 93060 • Tel: 1-805-933-9970 For full product details and specifications, please visit www.bendpak.com
13
HD-9SWXDouble Wide Tall Long
Lifting Capacity - 9,000 lbs.Max. Lift - 82” / Runway Length - 188”
Width - 206” / Length - 224”
ACCESSORIES:
HD-9SWDouble Wide Standard
Lifting Capacity - 9,000 lbs.Max. Lift - 70” / Runway Length - 164”
Width - 206” / Length - 200”
Jack Platform Aluminum Deck Drip TraysRJ-45 Rolling Bridge JackAir / Electric Work Station
• Push button pneumatic safety release
• Electric/hydraulic power system
• Optional power unit locations
Longer approach ramps
Optional rolling bridge jacks
HD-9 Series
Rugged 1-1/4” roller axles
• Heavy-duty 3/8”aircraft cables
• Multi-position safety locks
Adjustable lock ladders
Independent backup slack-cable safety latches
Oversize self-lubricating cable sheaves
1645 Lemonwood Drive • Santa Paula, CA USA 93060 • Tel: 1-805-933-9970
See it on the BendPak / Ranger YouTube Page
14
4-Post Heavy-DutyhdS Series Features & Specifications
•Adjustablerunwaywidths•Singlehydrauliccylinderunderramp•Fullyenclosedliftingcables,safety locks,&sheaves•Pneumaticpush-buttonsafetyrelease•Featuresheavy-dutyaircraftcable•Runwaysfeaturenon-skidsurface
•Internal“anti-sway”sliderblocksin eachcolumn•Longerrampsforlowground clearancevehicles•Oversizedsheavediameters•Rugged,self-lubricatingcablesheaves•Featuresheavy-dutysheaveaxles
•Multi-positionsafetylocksincolumns•Dual-positionpowerunitlocations•Redundantslack-cablesafetylatches•Fullyadjustablelocklevelingstops•Drivethroughrampsoptionavailable•48”approachrampsavailable
HD-14TSuper Tall
Lifting Capacity - 14,000 lbs.Max. Lift - 82” / Runway Length - 199”
Width - 130” / Length - 241”
HDS-14Standard
Lifting Capacity - 14,000 lbs.Max. Lift - 70” / Runway Length - 199”
Width - 130” / Length - 241”
HDS-14XExtended Length
Lifting Capacity - 14,000 lbs.Max. Lift- 70” / Runway Length - 229”
Width - 130” / Length - 271”
HDS-18
Lifting Capacity - 18,000 lbs.Max. Lift - 60” / Runway Length - 203”
Width - 154” / Length - 241”
HDS-27
Lifting Capacity - 27,000 lbs.Max. Lift - 60” / Runway Length - 263”
Width - 154” / Length - 297”
HDS-27X
Lifting Capacity - 27,000 lbs.Max. Lift - 60” / Runway Length - 323”
Width - 154” / Length - 357”
HDS-35
Lifting Capacity - 35,000 lbs.Max. Lift - 60” / Runway Length - 263”
Width - 154” / Length - 297”
SERIES FEATURES:
1645 Lemonwood Drive • Santa Paula, CA USA 93060 • Tel: 1-805-933-9970
HDSO-14Open Front Plain Deck
Lifting Capacity - 14,000 lbs. Max. Lift - 70” / Runway Length - 199”
Width - 143” / Length - 244”
For full product details and specifications, please visit www.bendpak.com
15
HDS-40X
Lifting Capacity - 40,000 lbs.Max. Lift - 60” / Runway Length - 323”
Width - 154” / Length - 357”
HDS-35X
Lifting Capacity - 35,000 lbs.Max. Lift - 60” / Runway Length - 323”
Width - 154” / Length - 357”
HDS-40
Lifting Capacity - 40,000 lbs.Max. Lift - 60” / Runway Length - 263”
Width - 154” / Length - 297”
ACCESSORIES:
DP-30 Rolling Oil Drain Air / Electric Work StationRolling Bridge Jacks
Extended length approach ramps
• Adjustable height locking positions
• Stainless steel lifting cables
• Spring-loaded safety locks Integrated flow restrictor
Rolling Bridge Airline Kit
Greasable sheave pins
Non-skid runwaysWide ramp surface
Optional bridge jack
Redundant slack cable safety lock
Maintenance-free electric hydraulic power system and conveniently push button safety lock release
Large diameter cable sheaves
1645 Lemonwood Drive • Santa Paula, CA USA 93060 • Tel: 1-805-933-9970
16
Alignment LiftshdS Series Features & Specifications
•Runawaysadjustfordifferentwidths•Multiauto-levellockingpositions•Singlehydrauliccylinder•Fullyenclosedliftingcables&sheaves•Pneumaticpush-buttonsafetyrelease•Heavy-dutyaircraftcable•Runwaysfeaturenon-skidsurface
•Self-lubricatingcablesheaves•Oversizedsheavediameter•Featuresheavy-dutysheaveaxles•Fullyadjustablelockstops•Drivethroughrampsavailable•Rollingbridgeairlinekitavailable•Rollbackkitavailable
HDS-14LSX
HDS-14LSXE
SERIES FEATURES:
HD-9AE
HDS-18A
HDSO-14LSXOpen Front
HDS-27A
Max. 2 Wheel Align. 212” - / Max. Lift - 68”Capacity - 14,000 lbs. / Runway Length - 229”
Width - 86” / Length - 276”
Max. 2 Wheel Align. - 182” / Max. Lift - 70”Capacity - 14,000 lbs. / Runway Length - 199”
Width - 130” / Length - 241”
Max. 2 Wheel Align. - 151” / Max. Lift - 60”Capacity - 18,000 lbs. / Runway Length - 203”
Width - 154” / Length - 241”
Max. 2 Wheel Align. - 160” / Max. Lift - 70”Capacity - 9,000 lbs. / Runway Length - 188”
Width - 127” / Length - 224”
Max. 2 Wheel Align. - 182” / Max. Lift - 70”Capacity - 14,000 lbs. / Runway Length - 199”
Width - 143” / Length - 244”
Max. 2 Wheel Align. - 211” / Max. Lift - 60”Capacity - 27,000 lbs. / Runway Length - 263”
Width - 154” / Length - 297”
1645 Lemonwood Drive • Santa Paula, CA USA 93060 • Tel: 1-805-933-9970
Courtesy of Leno’s Big Dog Garage
For full product details and specifications, please visit www.bendpak.com
Equipped with rear slip plates and galvanized front turn plates
17
HDS-35A
ACCESSORIES:
HDS-35XA
HD-9AEShown with rolling bridge jacks
Durable powder coat finish
• Single hydraulic cylinder
• Simple push-button lock release
• Maintenance-free power system
• Easy-to-reach operator controls Non-skid approach ramps
• Adjustable height locking positions
• Stainless steel lifting cables
• Spring-loaded safety locksDual-hub cable sheaves
Full floating galvanized turn plates
Non-skid runways
Recessed full floating slip platesOptional bridge jack
Integrated hydraulic flow restrictor
Max. 2 Wheel Align. - 271”/ Max. Lift - 60”Capacity - 35,000 lbs. / Runway Length - 323”
Width - 154” / Length - 357”
Max. 2 Wheel Align. - 211” / Max. Lift - 60”Capacity - 35,000 lbs. / Runway Length - 263”
Width - 154” / Length - 297”
DP-30 Rolling Oil Drain Air / Electric Work StationRolling Bridge Jacks Rolling Bridge Airline Kit
1645 Lemonwood Drive • Santa Paula, CA USA 93060 • Tel: 1-805-933-9970
HDS-27XA
Max. 2 Wheel Align. - 271”/ Max. Lift - 60”Capacity - 35,000 lbs. / Runway Length - 323”
Width - 154” / Length - 357”
1645 Lemonwood Drive • Santa Paula, CA USA 93060 • Tel: 1-805-933-9970 © 2011 BendPak, Inc. • BendPak, Inc. is a registered trademark.
This is my BendPak
There are many, but this one’s mine.
“Nothing I do or drive is stock. Everything that comes out of my shop has to be the best. That’s why me and my crew use BendPak products to customize every vehicle we touch. It’s a name I trust.”
– Jesse James, West Coast Choppers www.westcoastchoppers.com
191645 Lemonwood Drive • Santa Paula, CA USA 93060 • Tel: 1-805-933-9970
20
Quatra ScissorsXR Series Features & Specifications
•12,000lbs.liftingcapacity•Extendedrunway•Durablepowdercoatfinish•Multipositionrunwayworksteps•Nonskidrunwaysforsuregrip•Electric/hydraulicpowersystem•Integratedvelocityfusesforcylinders
•Powerconsolewithsimplecontrols•Opencenterdesign•Automaticlevelingsystem•Pneumaticpushbuttonrelease•Lubricatedbearingonallpivotpoints•Ruggedsteellegs•Canbeflushmountedorrecessed
•Easytouseandunderstand•Highefficiencyhydraulicpowerunit•Equippedwithrearslipplatesand galvanizedfrontturnplates•Straightupverticallifting
XR-12000AAlignment
SERIES FEATURES:
Rugged steel legs and formed steel runways
Multi position automatic leveling system
Cylinders feature integrated velocity fuses to control sudden decent
Full floating recessed slip plates
Multi-position runway work steps
Extendable, hinged, collapsible, and stowable approach ramps
1645 Lemonwood Drive • Santa Paula, CA USA 93060 • Tel: 1-805-933-9970
Easy access to electrical /hydraulic components with easy to use and understand operator controls
Grease fittings on all moving pins and bearings
MODEL XR-12000A XR-12000
LiftingCapacity 12,000lbs. 12,0000lbs.
OverallWidth 86” 86”
OverallLength 243” 215”
RunwayWidth 24” 24”
LengthofRunways 220” 192”
Max.2-WheelAlign. 194” N/A”
Max.LiftingHeight 74” 74”
See it on the BendPak / Ranger YouTube Page
For full product details and specifications, please visit www.bendpak.com
21
Durable powder coat finish will provide years of protection
Lubricated-for-life bearings on all pivot points
ACCESSORIES:
DP-30 Rolling Oil Drain Air / Electric Work StationRolling Bridge Jacks Rolling Bridge Airline Kit
Collapsible front tire stops clear for low vehicle skirts and alignment instrumentation
Full floating recessed galvanized turn plates
Non-skid runways for sure grip
Open center design
Optional RJ-6 6,000 lb. capacity rolling bridge jacks
XR-12000Standard Deck
1645 Lemonwood Drive • Santa Paula, CA USA 93060 • Tel: 1-805-933-9970
22
Scissors & Low-Mid RiseMid-Rise Series Features & Specifications
LR-60Low-Rise
Lift Pad Dimensions - 18” x 53”Capacity - 6,000 lbs.
Height Range - 4”- 26”
MD-6XPMid-Rise Portable
Adjustable Arms Capacity - 6,000 lbs.
Height Range - 5”- 48”
SP-7XFull Rise
Lift Pad Dimensions - 21” x 70”Capacity - 7,000 lbs.
Height Range - 5”- 68”
STANDARD FEATURES:
MD-6XP
Multi piece adapter set
Safety lock bar with multiple lock positions
Perfect for light-duty trucks and cars
Adjustable arm assemblies
Portable motor cart serves as tow handle
Twin hydraulic cylinders
Durable powder coat finish
Solid steel torsion bar
1645 Lemonwood Drive • Santa Paula, CA USA 93060 • Tel: 1-805-933-9970
Portable ModelsMobile power cart portable models
SP-7X & All Low-Rise Models1.5 inch Rubber Lift Blocks
MD-6XP ModelMulti Piece Adapter Set
For full product details and specifications, please visit www.bendpak.com
23
1.5” Rubber Lift Blocks 6” Rubber Lift Blocks LR-4A Arm Kit3” Rubber Lift Blocks
P-6FBOpen Center Pit Lift
Flush Mount
Lift Pad Dimensions - 18” x 53”Capacity - 6,000 lbs.
Height Range - 4”- 26”
P-6BOpen Center Pit Lift
Lift Pad Dimensions - 18” x 53”Capacity - 6,000 lbs.
Height Range - 4”- 26”
LR-60PLow-Rise Portable
Lift Pad Dimensions - 18” x 53”Capacity - 6,000 lbs.
Height Range - 4”- 26”
ACCESSORIES:
XR-12000Full-Rise Open Center
Lifting Capacity - 12,000 lbs.Max. Lift - 74” / Runway Length - 192”
Width - 86” / Length - 249”
1645 Lemonwood Drive • Santa Paula, CA USA 93060 • Tel: 1-805-933-9970
24
GALLERY:
Parking & StorageParking Series Features & Specifications
SERIES FEATURES:
•Perfectforcars&lighttrucks•Singlehydrauliccylinder•Dependablehydraulicdesign•Easyoperation•Electric/hydraulicpowersystem•Automaticsafetylocks•Widedeckplatformforlargevehicles
PL-6000X
Capacity - 6,000 lbs.Rise - 85” / Deck Length - 158”
Width - 110” / Length - 165”
PL-6000
Capacity - 6,000 lbs.Rise - 73” / Deck Length - 158”
Width - 110” / Length - 165”
PLT-6S
Capacity - 6,000 lbs.Rise - 62” / Deck Length - 135”
Width - 99” / Length - 154”
PL-18000
Capacity - 6,000 lbs. Per DeckOverall Height - 361” / Deck Length - 155”
Width - 115” / Length - 194”
HDS-35PX
Capacity - 35,000 lbs.Rise - 168” / Deck Length - 399”
Width - 186” / Length - 456”
PL-14000
Capacity - 7,000 lbs. Per DeckOverall Height - 281” / Deck Length - 155”
Width - 115” / Length - 194”
PL-7000X
Capacity - 7,000 lbs.Rise - 85” / Deck Length - 158”
Width - 99” / Length - 174”
1645 Lemonwood Drive • Santa Paula, CA USA 93060 • Tel: 1-805-933-9970
See it on the BendPak / Ranger YouTube Page
For full product details and specifications, please visit www.bendpak.com
25
GALLERY:
Wide-base plate mounts directly on ground or asphalt
• Overhead power unit provides smooth quiet hydraulic operation
• Power unit and controls integrated within the lift structure
• Automatic safety lock
Designed for installation on typical parking surfaces
Maintenance-free composite carriage bearings and self-lubricating chain rollers
Wide deck platform accommo-dates pickups, vans, and cars
Heavy-duty lifting chains
PL-7000X
Minimum footprint allows multiple installations in limited space
1645 Lemonwood Drive • Santa Paula, CA USA 93060 • Tel: 1-805-933-9970
26
Rolling Bridge JacksSpecialty Series Features & Specifications
•4,500-25,000lbs.liftingcapacity•Versatiledropinliftingpads•Multipieceadaptersetstandard•Airhydraulicpowerunit•Stackableadapters•Automaticsafetylocks•Wheelframeassemblyforeasymobility
Specialty Series Features & Specifications
SERIES FEATURES: SERIES FEATURES:
RJ-45
Lifting Capacity - 4,500 lbs.Lift Pad Reach - 42”- 57”Frame Reach - 36”- 47”
RJ-6
Lifting Capacity - 6,000 lbs.Lift Pad Reach - 42”- 57”Frame Reach - 36”- 47”
RJ-15
Lifting Capacity - 15,000 lbs.Lift Pad Reach - 29 ”- 58”Frame Reach - 46”- 59”
RJ-18
Lifting Capacity - 18,000 lbs.Lift Pad Reach - 29”- 63”
Frame Reach - 45”
RJ-25
Lifting Capacity - 25,000 lbs.Lift Pad Reach - 29”- 63”
Frame Reach - 45”
RJ-45
1645 Lemonwood Drive • Santa Paula, CA USA 93060 • Tel: 1-805-933-9970
RJ-9
Lifting Capacity - 9,000 lbs.Lift Pad Reach - 42”- 61”Frame Reach - 45”- 50”
RJ-7
Lifting Capacity - 7,000 lbs.Lift Pad Reach - 42”- 57”Frame Reach - 36”- 47”
For full product details and specifications, please visit www.bendpak.com
27
Portable Column LiftSpecialty Series Features & Specifications
•16,500lbs.columncapacity•66,000lbs.maximumcapacitysetof4•99,000lbs.maximumcapacitysetof6•3modesofoperation•70”liftingheightfortallmechanics•Extended15”forksforwidetires•Electronicselfdiagnosticsfunctions
•Independentcolumncontrolstations•Troublefreehydraulicliftingsystem•Lowpowerconsumption•Separatekeylocksecurity•Fuseprotected•Sealedrollerbearingoncarriages•Tightturningradius
•SimpleOperation•Operatormonitoringandautomatic levelingcontrol•Automaticindependentsafetylocks
SERIES FEATURES:
PCL-16HD-4
Column Capacity - 16,500 lbs.System Capacity - 66,000 lbs.
Lifting Height - 68”Durable powder coat finish
• Automatic leveling control
• Lower power consumption
• Fuse protected
• Separate key lock for each control box
Quick-disconnect plugs at each column
Low profile fork angle for easy positioning
*Can be configured in sets of 4 or 6
Trouble-free hydraulic lifting system
Multi-width wheel forks with locking pins
3 modes of operation
User friendly controls
Hydraulic jack wheel assembly allows a tight turning radius providing easy mobility
1645 Lemonwood Drive • Santa Paula, CA USA 93060 • Tel: 1-805-933-9970
28
Pipe BendersBender Series Features & Specifications
•3-1/2”Min.bendingradius•5”Max.bendingradius•Canisterstylehydraulicfilter•5Hp/208-230VACmotor•Manualorautomaticcontrols•Drop-inswagingcollars•Twistlocktooling
•ANSI92.2Cylinders•Quickreleasebendingdies•Bendingheadstowithin.002”•Bendingandendfinishingoperation•Adjustablebackgatepressure•180ºbendingcapacity•Onepiecesolidsteelbarrel
•Directdrivehighspeed4GPMpump•Tooltrays•Largefluidreservoir•Filteredhydraulicsystem•Oilsightgauges•1/2”highpressurehose•Widevarietyoftoolingavailable
1302BA-2021302BA-302
Bending Controls - Digital AutomaticClampless Swager - Internal Expander
202 or 302 Die Package Available
BB-1
Bending Controls - ManualClampless Swager - Internal Expander
BB-1 Die Package Available
SERIES FEATURES:
1302BAS-2021302BAS-302
Bending Controls - Semi-AutomaticClampless Swager - Internal Expander
202 or 302 Die Package Available
BB-2
Bending Controls - ManualClampless Swager - Internal Expander
BB-2 Die Package Available
1502BA-2021502BA-302
Bending Controls - Digital AutomaticClampless Swager - Internal Expander
202 or 302 Die Package Available
1502BAS-2021502BAS-302
Bending Controls - Semi-AutomaticClampless Swager - Internal Expander
202 or 302 Die Package Available
BB-1 / 202 Economy Die PackageBending and End Forming Tooling
Sizes - 1-1/2”- 1-3/4”- 2”- 2-1/4”- 2-1/2”
BB-2 / 302 Economy Die PackageBending and End Forming Tooling
Sizes - 1-1/2”- 1-3/4”- 1-7/8”- 2”- 2-1/4”- 2-1/2”
BB-1 / 202DIE PACKAGE
BB-2 / 302DIE PACKAGE
1645 Lemonwood Drive • Santa Paula, CA USA 93060 • Tel: 1-805-933-9970 For full product details and specifications, please visit www.bendpak.com
29
300-1 Die Package Card System CD300-2 Die Package Rotation DialSpecialty ToolingAvailable Upon Request
BB Series / 1302 SeriesTop View
1502 SeriesTop View
BAS Semi-Automatic Controls
BA Digital Automatic Controls
ACCESSORIES:
1645 Lemonwood Drive • Santa Paula, CA USA 93060 • Tel: 1-805-933-9970
Air CompressorsLS Series Features & Specifications
•80-Gallonverticaltank•3-Cylinder/2-stagepump•ASMEratedtank•Siemens™electricmag-starter•Fan-typeflywheel•Fully-enclosedbeltguard•Oversizedrollerbearings
•Forgedductileironcrankshaft•Forgedaluminumalloypistons andconnectingrods•100%castironblock•Castironcylindersandheadswith deepcoolingfins•Forced-airaftercooler
•Oilsightgauge•Automaticpressureswitch•ASMEratedoverloadpressure safetyvalve•Pressuregaugewithvalve•Oversizedreplaceableairfilters•Automaticstart/stop
SERIES FEATURES:
30 1645 Lemonwood Drive • Santa Paula, CA USA 93060 • Tel: 1-805-933-9970
The100%cast-ironTRI-MAX™Seriespumpfeaturessimple
splashlubricationfortotalreliabilityanda“W-3”finned
cylinderconfigurationthatprovides360°cooling.LowerRPM’sand
large-diameterfinnedcoppertubingbetweenstages,means
theywillruncooler,whichultimatelyachievesmaximum
compressorefficiencywithlessmoisturecontamination.
For full product details and specifications, please visit www.bendpak.com
Cast iron heads
Large mass-air filters
Large “Finned” copper tubing helps keeps air cool between stages and to tank
5 HP MODELS
LS580V-601 / 208-230 V / 60 Hz / 1 PhLS580V-603 / 208-230 V / 60 Hz / 3 Ph
Horsepower - 5 HpMaximum CFM - 22.8 / 175 psi
7.5 HP MODELS
LS7580V-601 / 208-230 V / 60 Hz / 1 PhLS7580V-603 / 208-230 V / 60 Hz / 3 Ph
Horsepower - 7.5 HpMaximum CFM - 28.5 / 175 psi
Deep cooling fins on the cast iron cylinders help maintain a lower operating temperature
Oversized balanced flywheel features large fan blades that forces cool air on the compressor pump
Pump cutaway
Air Receiver Tank Moisture Minder® Kit Anti-Vibration PadsMoisture Minder®
ACCESSORIES:
311645 Lemonwood Drive • Santa Paula, CA USA 93060 • Tel: 1-805-933-9970
Forged aluminum alloy connecting rods
Fully-enclosed belt guard
American made motor
Siemens™ UL approved electric mag-starter
Wide base
Integrated tank drain
Oil site gauge
TriMax™ ReciprocatingAir Compressors ASME rated overload pressure safety valve
Pressure switch automatic start/stop
Oversized tapered roller bearings
100% cast iron pump
Forged aluminum alloy pistons
ASME rated 80 gallon tank
1645LemonwoodDrive•SantaPaula,CAUSA93060©2011BendPakandRangerProductsareregisteredtrademarks.
TOUCHLESS, LEVERLESS ASSiSTAnT TOOLS
UnDERSiDE CAMERA WiTH LCD MOniTOR
AUTO-LOCATing TOOL HEAD
ALL fOR Much LESS thAn yOu’D EXPEct.
•Neverscratchanotherexpensiverim•Savetime,increaseprofits•Simpletolearn,easytomaster
If It GOt AnyEASIER,thE tIRE wOuLD chAnGE
ItSELf.
tOuchLESS
tIRE chAnGER.
ADVAnCED, STATE OF THE ART FEATURES
www.bendpak.com/rx3040 1-805-933-9970
331645 Lemonwood Drive • Santa Paula, CA USA 93060 • Tel: 1-805-933-9970
34
Wheel ServiceR Series Features & Specifications
TM
SeRieSRanger’s NextGen™ Tire Changers - Tire Shop Tested™
AllNextGenmodelsareloadedwithdesignenhancementsthatmakethetechnician’sjobeasier.Sturdyframes,rigid45mmhexagonalverticalshafts,andhardened-steelhorizontaloutriggersupportarmseliminateflexduringalltireserviceproceduresreducingthechanceofdamagetoexpensivewheels.BeadseatingandtireinflationissimpleandeffortlesswithRanger’sexclusiveTurboBlast™portablebeadseatingsystem.High-torqueelectricturntables,increasedspeedandreversibledirectionmeansquickertireremovalandinstallation.Industrial-gradepneumaticcontrolvalvesfeaturediecastandmachinedbodiesconstructedfromzincandaluminumforincreasedservicelifeandperformanceatthehighestlevelpossiblewithinalmosteveryimaginableworkingcondition.Importantwheelserviceaccessoriescomestandardlikealargesoapbucketwithbrushandamulti-pieceplasticwheelprotectorkitthatincludesturntablejawcovers,bead-breakerbladebootsandspecializedmount/demountheadcoverstohelpprotectdelicatewheels.
For full product details and specifications, please visit www.bendpak.com
R23LTTilt-Back
Internal Clamping - 11.5”- 24”External Clamping - 10”- 22”
Maximum Diameter - 47”
R745Swing Arm
Internal Clamping - 12”- 21”External Clamping - 10”- 18”
Maximum Diameter - 26”
Internal Clamping - 13”- 25.5”External Clamping - 11.5”- 23.5”
Maximum Diameter - 50”
R980XRSwing Arm
Internal Clamping - 13”- 25.5”External Clamping - 11.5”- 23.5”
Maximum Diameter - 51”
Internal Clamping - 11.5”- 24”External Clamping - 10”- 22”
Maximum Diameter - 41”
Internal Clamping - 14.5”- 28”External Clamping - 12.5”- 26”
Maximum Diameter - 12.5”- 26”
Internal Clamping - 14.5”- 28”External Clamping - 12.5”- 26”
Maximum Diameter - 47”
Internal Clamping - 13”- 33”External Clamping - 10”- 28”
Maximum Diameter - 10”- 28”
R26FLTTruck Tire Changer
Drive System - Electric / HydraulicMaximum Wheel Diameter - 27”Maximum Tire Diameter - 63”
R23ATTilt-Back Power Assist
R26ATTilt-Back Power Assist
R980NXTSwing Arm Power Assist
R26DTTilt-Back Dual Power Assist
R30XLTSwing Arm Power Assist
35
Reduction / Extension Clamps Plastic Mounting Head Wheel Protector Kit
1645 Lemonwood Drive • Santa Paula, CA USA 93060 • Tel: 1-805-933-9970
Duck Head AdapterMotorcycle Wheel Clamp
RX-3040
TM
SeRieS
Ranger RimGuard™ technology means expensive wheels are handled with greater care
Ergonomic joystick control
No-Mar Quick-Nut
Power operated wheel liftConvenient foot operated controls
Pneumatic power assisted traveling drop center/bead lifting tool
Power-pivot arm facilitates quicker mounting and demounting operations
Infrared LED camera
Independently operated, high strength nylon dual bead rollers
Full color 7” LCD monitor
Pressure gauge with air pressure relief valve
Turbo-blast bead seat inflation hose
ACCESSORIES:
See it on the BendPak / Ranger YouTube Page
36
Wheel ServiceR Series Features & Specifications
•Handlestiresupto68”indiameter•Largewatertank•Footoperatedwheellift•500-lb.capacity•Heavy-dutyallsteelconstruction andpowdercoatedfinish•Includesbuilt-indrain
•Simple,one-manoperation•Heatstreads,shoulderandsidewall•Curesthepatchesandinnertirelining•Rotatingadjustableframe•Adjustableheighttower•Contouredinnerandoutercuringheads•Curesbothpatchandplugatthesametime
•Adjustableheighttirespreader•Air-powered•Perfectfortireinspectionandrepair•Heavy-dutyrollersallowtirestorotatefreely•Heavysteelconstruction•Wide-basedesignforstability•Powdercoatfinish
RWS-55TD FEATURES:
TS-150Tire Repair Wheel Lift
Wheel Lift Tire SpreaderAdjustable Height Lifting
Adjustable Spreader Forks
Dimensions - 57” x 22” x 14” Heated Tire Repair / Tread & Sidewalls
Rotating Adjustable Tower
RWS-55TDTire Dunk Tank
Dimensions - 59” x 63” x 75” Capacity - 500 lbs.
Foot Pedal Pneumatic Wheel Lift
DST-2420 FEATURES:
Safety shield comes standard
RL-8500
Work bench with large tool storage boards
Standard arbor provides a multitude of tooling choices
Tool tray for your convenience
One cut micro-finish with our micro dial twin tool cutters
Infinitely variable spindle and cross feed settings
Rugged cast iron body
Chip funnel and chip catcher
Durable dual work lamps
RV-80L FEATURES: TS-150 FEATURES:
RV-80LTire Vulcanizer
Fully equipped tool package come standard See it on the BendPak / Ranger YouTube Page
For full product details and specifications, please visit www.bendpak.com
37
CRT380RWireless Wheel Aligner
Wireless Bluetooth AlignerProSpec® Software for Cars and TrucksComplete Package / Computer & Printer
RL-8500 / RL-8500XLTCombination Brake Lathe Package
Maximum Rotor Thickness - 2.5” Maximum Rotor Diameter - 17”
Complete Package / Bench & Tooler
CRT380R
•Dynamic,static,&performance alloysettings•Automaticbraking•Selfcalibrationfunction•Manualorautomaticstart•LowRPMbalancingspeed•Ergonomiccontrolboard
•ProSpec®AlignmentSoftware•CordlessBluetooth®sensors•Superiorscreengraphics•Self-explanatoryuserinterface•Self-centeringwheel-clampadaptors•Rollingorliftedrunoutmodes•Vehicleadjustmentillustrations
•Quick-ChangeAdapter-Plussystem•Worksonallcarsortrucks,both` foreignanddomestic•Massivetaperedspindlebearings•“Splash-lube”oilfeedsystemprovides aconstantflowofoil•Easilychangearborspeedsinseconds
DST-2420 FEATURES:
Self-centering wheel-clamp adapters
Cordless Bluetooth® sensors remove the hassle of connecting cables
Tool tray for your convenience
“Before” and “after” measurements can be printed
Superior screen graphics with vibrant animation
Visual vehicle adjustment help
DST-2420Wheel Balancer
Wheel Diameter - 10”- 24”Multi Piece Cone Set
Max. Tire Diameter - 47”
1645 Lemonwood Drive • Santa Paula, CA USA 93060 • Tel: 1-805-933-9970
CRT380R FEATURES: RL-8500 FEATURES:
38
Jacks & LiftingR Series Features & Specifications
RFJ-3T
Capacity - 6,000 lbs.Height - 4.75”- 20.5”Chassis Length - 28”
RFJ-2TX
Capacity - 4,000 lbs.Height - 3.5”- 31.5”Chassis Length - 37”
RFJ-214T
Capacity - 4,500 lbs.Height - 5”- 19.25”
Chassis Length - 26”
RFJ-3TQP
Capacity - 6,000 lbs.Height - 5”- 19.75”
Chassis Length - 25.5”
RFJ-3TQ
Capacity - 6,000 lbs.Height - 4.5”- 20.5”Chassis Length - 28”
RFJ-3TP
Capacity - 6,000 lbs.Height - 5.25”- 19.25”Chassis Length - 26”
RFJ-6HD
Capacity - 6,000 lbs.Height - 3.625”- 21”Chassis Length - 27”
RFJ-3000LPF
Capacity - 3,000 lbs.Height - 2.75”- 24”
Chassis Length - 34”
RFJ-3000AL
Capacity - 3,000 lbs.Height - 3.5”- 17.75”Chassis Length - 24”
Ranger’swide-arrayofmulti-purposefloorjacksjustkeepsgettinglargerandmorediverse.Ourcurrentlineoffloorjackshasmaximumcapacitiesrangingfrom2,000to55,000lbs.andcomeinavarietyofstyleslikequick-pumpandlow-profile.Nomatterwhichoneyouchoose,Rangerfloorjacksofferincredibleliftingpowerandtopnotchconstructionthatyoucancountontoneverletyoudown.Ourimpressivelineoffloorjacksiscarefullydesignedtoaccommodateawidespectrumofweightcapacitiesandliftingapplications,easilyliftingjustaboutanythingthatneedsservice.
INFORMATION: GALLERY:
For full product details and specifications, please visit www.bendpak.com
39
RBJ-25TL
Capacity 1st Stage - 55,000 lbs.Capacity 2nd Stage - 20,000 lbs.
Height - 7.125”- 14.75” / Chassis Length - 30”
RST-2TCBFloor Jack Crossbeam
Capacity - 4,500 lbs.Saddles Adjustment - 23”- 32”
Dimensions - 6” x 27” x 6”
RFJ-10TL
Capacity - 20,000 lbs.Height - 7”- 23”
Chassis Length - 61”
RTJ-1
Capacity 1st Stage - 2,000 lbs.Capacity 2nd Stage - 1,000 lbs.
Height - 37”- 79.5” / Base - 39”x 39”
RTJ-1100
Capacity - 1,100 lbs.Height - 45”- 72”Base - 24” x 24”
RTJ-660
Capacity - 660 lbs.Height - 51”- 73”Base - 30”x 30”
RTJ-3000
Capacity 1st Stage - 3,000 lbs.Capacity 2nd Stage - 2,000 lbs.
Height - 37”- 79.5” / Base - 45”x 45” RFJ-3000LPF
1645 Lemonwood Drive • Santa Paula, CA USA 93060 • Tel: 1-805-933-9970
GALLERY:
40
Jacks & LiftingR Series Features & Specifications
•Weldedsteelconstructionfor maximumdurability•Safetyratchetdesignassuresstands remainlockedunderload•Perfectforholdingdrive-trainor exhaustcomponentsinposition•Solidinpairs
•Quickadjustspinhandlewiththrustbearing•Widebaseprovidesmaximumstability•Thick,rubberadjustablepadfor maximumsupport•Convenienthandleandcolumnrelease•HardenedACMEscrewforeasyadjustment•Tripoddesignevenlydistributesweight
SERIES FEATURES:
RJS-12T
Holding Capacity - 24,000 lbs.Height - 20”- 30.5”
Base Dimensions - 14.5” x 13”
RJS-6T
Holding Capacity - 12,000 lbs.Height - 15.5”- 24.5”
Base Dimensions - 9” x 10.5”
RJS-3T
Holding Capacity - 6,000 lbs.Height - 11.5”- 17”
Base Dimensions - 7” x 7.5”
RJS-1TF
Holding Capacity - 1,650 lbs.Height - 54.5” - 80.5”Base Dimensions - 12”
RJS-1T
Holding Capacity - 1,650 lbs.Height - 54.5” - 80.5”Base Dimensions - 12”
MLS-16
Holding Capacity - 16,000 lbs.Height - 54” - 8”
Base Dimensions - 32”
RJS-2TH
Holding Capacity - 4,000 lbs.Height - 55”- 87”
Base Dimensions - 24” x 24”
RWS-150WLWheel Lift
Lifting Capacity - 150 lbs.Lifting Height - 36”
Air Requirement - 90-150 psi
R Series Features & Specifications
RWS-150WL
For full product details and specifications, please visit www.bendpak.com
41
RML-1100
Lifting Capacity - 1,100 lbs.Height - 3.5”- 16”
Top Dimensions - 6” x 17.75”
RML-750HD
Lifting Capacity - 1,500 lbs.Height - 7”- 43”
Table Width - 29.5” / Table Length - 80.5”
•Constructedoutof12-gaugesteel•Pneumaticliftingcylinder•Durablepowder-coatfinish•Adjustablefrontwheelvise•Drop-awayrearwheeldeck•Easyramp(s)removal•Frontandsideextensionsstandard
•Built-inretractableswivelcasters•Fulltravelautomaticsafetylocks•Singlehydraulicliftingcylinder•Heavy12-gaugesteelconstruction•Sideextensionscomestandard•Airorhydraulicpumpoperation•Multiplelockingpositions
•PerfectformotorcyclesandATVs•Worksontheground•Worksasaplatformmotorcyclelift•Low-profiledesign•Includestwoadjustablesaddleadapters•HardenACMEscrewsforpreciselifting•Lightweightalloyconstruction
RML-600XL FEATURES:
RML-750HD (Side extensions not shown)
Heavy 12-gauge steel construction
Single hydraulic lifting cylinder
Approach ramp extension
Air or hydraulic pump operation
Rear support poles
Retractable real wheel deck
RML-600XL
Lifting Capacity - 1,000 lbs.Height - 7”- 31.5”
Table Width - 24” / Table Length - 79”
Full travel automatic safety locks
Built-in retractable swivel casters can be moved when loaded
1645 Lemonwood Drive • Santa Paula, CA USA 93060 • Tel: 1-805-933-9970
Motorcycle LiftsR Series Features & Specifications
RML-750HD FEATURES: RML-1100 FEATURES:
42
Tool Storage & BenchesR Series Features & Specifications
RTB-2D
Number of Drawers - 2Unit Dimensions - 26.5” x 10.5” x 12.25” Mates with RTB-9D / RTB-7DC / RTB-10D
RTB-13DC
Number of Drawers - 13Unit Dimensions - 47.5” x 40” x 19”
Mates with RTB-8D
RTB-7DC
Number of Drawers - 7Unit Dimensions - 29” x 40” x 18”
Mates with RTB-2D / RTB-9D / RTB-10D
RTB-9D
Number of Drawers - 9Unit Dimensions - 26” x 17” x 12”
Mates with RTB-2D / RTB-10D
RTB-8DT
Number of Drawers - 8Unit Dimensions - 41.5” x 19.5” x 18.5”
Mates with RTB-13DC
RTB-8D
Number of Drawers - 8Unit Dimensions - 41.5” x 19” x 18.5”
Mates with RTB-13DC
RTB-10D
Number of Drawers - 10Unit Dimensions - 26” x 19” x 16”
Mates with RTB-2D / RTB-7DC
RWB-2D FEATURES:
RangerToolboxesandtoolchestsaregainingpopularitybythedayinautomotiveshopsandprivategarages.That’sbecauseourtoolstoragesolutionsarebuilttothestrictestspecifications,featuringhigh-grade16-and18-gaugesteelconstruction,durableinternalcages,high-qualitywelds,allthebestdrawerhardwareandamasterfulcherry-redpowdercoatfinishthatlooksbetterthananystockpaintjobonthemarket—andit’lllastforevertoboot.
Withoutquestion,foryourprojectstogetcompletedontimeandtoyoursatisfaction,yourequireadedicatedworkarea.SoRangerdevelopedalineoflarge,heavy-gaugesteelworkbenches,specificallydesignedtohandlethephysicalrigorsofbeinginabusygarageorshop.Wecurrentlyofferthreesizesandstylestosuityourneedsandspacerestraints.
INFORMATION:
For full product details and specifications, please visit www.bendpak.com
43
RWB-1TD
Height - 34.5”Width - 79”
Depth - 25.25”
RWB-2S
Height - 34.5”Width - 79”
Depth - 25.25”
RWB-2D
Height - 34.5”Width - 59”
Depth - 25.25”
•Electrostatictriple-bakedprotectivepowdercoat•Rollededgesforaddedstrengthandrigidity•Full-extensionballbearingdrawerslides•Tumblerkey-lockpivotdrawerlatchingsystem
•Glossyredfinish•Electrostaticoven-bakedpowdercoat•Rollededgesforaddedstrengthand rigidity•5/32”HDrollededgesteeltabletop•3/32”HDrollededgesteelshelves•12-gaugeconstruction
•Lockableheavy-dutydrawer•500lb.workingcapacity•Heavy-duty4”casters•Adjustableworkingheight•Removablepolyethylenefluiddrain•14-gaugetabletop•3/4”liquidcontainingrim
RWB-2D FEATURES:
Rolled edges for added strength and rigidity
Protective rubber mat
Chrome side handles
Brushed aluminum drawer handles
2 heavy-duty fixed urethane casters and 2 heavy-duty swivel urethane casters with brakeElectrostatic oven baked
powder coat finish
Heavy-gauge steel body
Full-extension ball bearing drawer slides
RTB-8D / RTB-13DCShown as combo
1645 Lemonwood Drive • Santa Paula, CA USA 93060 • Tel: 1-805-933-9970
RWB-2S FEATURES: RWB-1TD FEATURES:
44
Shop EquipmentR Series Features & Specifications
RCD-3TR
Tray Dimensions - 16” x 32”Shipping Weight - 40 lbs.
Shipping Dimensions - 31 ” x 17” x 6”
RCD-65
Load Capacity - 55 lbs.Shipping Weight - 38 lbs.
Shipping Dimensions - 30” x 26” x 6”
RCD-1TDAuto Carts
Capacity - 1,000 lbs. (Each)Dimensions - 15.5” x 23.5” Shipping Weight - 46 lbs.
RP-20T
Capacity - 40,000 lbs.Cylinder Stroke - 8”
Width - 27” / Height - 61”
RP-10TPPorta Power
Capacity - 10 TonsStroke Ram - 6”Hose Length - 6’
RCD-1VVehicle Dolly
Lifting Capacity - 1,500 lbs.Overall Height - 12”Caster Size - 4.5”
RP-20HD
Capacity - 40,000 lbs.Cylinder Stroke - 5.5”
Width - 37” / Height - 60.25”
SERIES FEATURES:
RP-20HD
Integrated 4” diameter 20-ton pressure gauge
Hydraulic cylinder moves laterally
Adjustable table height
LetRangerProductslightentheloadwithourconsiderablelineofhigh-qualityrollingequipment.AllRangerCartsandDolliesaremadefromhigh-gaugesteelandemployonlythebestcastersforeasymaneuvering.Ourservicecarts,chassis-mountvehicledollies,low-profileautomobilecartsandrollingadjustableworktablescomefullyequippedtomakeyourdayinthegarageinfinitelyeasier.Don’tliftorcarry—rollwithRanger!
Ranger’sindustrialshoppressesofferyoutheversatilityofprofessional-gradehydraulicforce,whetheryou’reattheshoporinyourowngarage.Amongotheroperations,allRangerHydraulicPressesareidealfortheremovalandinstallationofgears,bushingsandbearings—soyoucanbend,straighten,flatten,crush,press,shape,push,pull,liftandspreadlikeyouwereborndoingit.
INFORMATION:
For full product details and specifications, please visit www.bendpak.com
45
RH-50PL
Air Pressure - 300 psiHose Length - 50’
Fittings - 3/8”
RH-50SL
Air Pressure - 300 psiHose Length - 50’
Fittings - 3/8”
RH-33SL
Air Pressure - 300 psiHose Length - 33’
Fittings - 3/8”
RH-50PM
Air Pressure - 3,000 psiHose Length - 50’
Fittings - 3/8”
•Wall,floor,orceilingmount•Useforairorwater•Powdercoatedforcorrosionfree performance•Solidbrassswivelfitting•Guidearmsadjuststo9positions•4direction,non-snagrollers
•Multi-positionreleaseratchet•Anti-lockoutratchetmechanism preventsreelfromlockingupwhen hoseiffullyextended•Reinforcedmountingbase
SERIES FEATURES:
RH-50PL
Use for air or water
Solid brass swivel fitting
Wall, floor, or ceiling mount with a 7” x 8” reinforced mounting base
Anti-lock out ratchet mechanism prevents reel from locking up when hose is fully extended
4-direction, non-snag rollers
1645 Lemonwood Drive • Santa Paula, CA USA 93060 • Tel: 1-805-933-9970
46
Shop EquipmentR Series Features & Specifications
oil drains•Lightweightforeasyportability•Safeandeasytouse•Non-corrosivetelescopingtube•Heavy-dutystainlesssteelclamp•Built-inhandgrips•Durablesteelconstruction
•Toughconstructionwillresistdents, rust,andcorrosion•Ruggedfunnelwithbuilt-in contaminationscreenoil Filter crushers•Reducescansupto20%•Reducesfiltersupto25%
•Crushescansinonly20seconds•100%airoperated•FulfillsEPAandothermandated environmentalstandards•Removesupto95%oftheoil•Compactfloororbench-mountdesign•All-steelindustrialconstruction
SERIES FEATURES:
RD-15
Capacity - 15 gal. Height - 8.5”
Shipping Weight - 52 lbs.
RD-18G
Capacity - 8 gal.Height - 45”- 72”Funnel Diameter - 18”
RP-20FCOil Filter Crusher
Cycle Time - 15 - 20 sec.Air Requirements - 125 - 175 psiDimensions - 17” x 29.5” x 17”
RP-6KCPaint Can Crusher
Cycle Time - 15 - 20 sec.Air Requirements - 140 - 160 psi
Dimensions - 15” x 37” x 14”
RD-20SEAir Evac Oil Drain
Capacity - 20 gal. Height - 52”- 83”
Funnel Diameter - 16”
RP-20FCSStand
Capacity - 230 lbs.Unit Weight - 72 lbs.
Dimensions - 27.75” x 42” x 17.75”
RD-8G
Capacity - 18 gal.Height - 48”- 72”Evacuation Pump
See it on the BendPak / Ranger YouTube Page
For full product details and specifications, please visit www.bendpak.com
47
RS-750Spray Wash Cabinet / Truck
Load Capacity - 1,000 lbs.Tank Capacity - 53 gal.
Interior Dimensions - 32” x 54”
RS-500Spray Wash Cabinet
Load Capacity - 500 lbs.Tank Capacity - 50 gal.
Interior Dimensions - 43” x 32”
•Heavy-dutysteelconstruction•Removabletankscreen•Stainlessoilskimmer•Removablepartstree•Powdercoatfinish•Brassnozzles•Fullopeningoctagonaldoor
•Largedrainpipe•Heavy-dutyrubbercasters•Friction-driveturntablesystem•Gasket-freedoor•Smallpartsbasket•Stainlesssteelhandles•Freebucketofsoapincluded
•Non-foamingsoap•LowpH•Mildalkali•Watersoluble•Speciallyformulated•Removesgrease,oil,stains,carbon, protein,andsomepaints
RS-750
Quick release door latch
Heavy-duty rubber casters
Removable tank screen and parts tree
Stainless oil skimming system
Built-in tank drain
Automatic timer and safety door switch
Friction-drive turntable system
SOAP 25 LBS.
Low pHWater soluble
Non foaming soap
1645 Lemonwood Drive • Santa Paula, CA USA 93060 • Tel: 1-805-933-9970
RS-500 / RS-750 FEATURES: SOAP FEATURES:
48
Shop EquipmentR Series Features & Specifications
Small Material Bender•Heavysteelconstruction•Perfectforbendingsolid,round andflatsteelbarsortubing•Musthaveformufflershops•Bendsvirtuallyallsmalltubingand squarestocksizes
Rolling creeper/Work Seat•Paddedcentercushionandheadrest•Swivelcastersforeasymaneuverability•Relievessorebackmuscles•Workmoreefficiently•Sturdysteeltubingconstruction•Lowprofiledesign
Tire changers•Rubbergriphandles•Perfectforhomeorshopuse•Portableandeasytouse•Heavysteelconstruction•Self-levelingstand•Efficientoperationatafractionofcost
SERIES FEATURES:
RST-1WSRolling Work Seat
Steel Tubing - 1”Swivel Casters - 2.5”
Shipping Weight - 10 lbs.
RST-1CCreeper
Weight Capacity - 350 lbs.Steel Tubing - 3/4”
Swivel Casters - 2.5”
RB-1STSmall Material Bender
Maximum Bending Depth - 90ºTubing Sizes - 1/4”- 3/8”- 1/2”- 5/8”
Shipping Weight - 32 lbs.
RWS-3TCManual Tire Changer
Tire Capacity - 8 to 7.5”- 16”Wheel Plate Diameter - 7.5
Base Dimensions - 15” x 18”
RWS-2TCMini Tire Changer
Tire Capacity - 4”- 12”Shipping Weight - 14 lbs.
Shipping Dimensions - 22” x 7” x 6”
RWS-1BBubble Balancer
Hub Hole Diameter - 1.5”- 4.5”Calibrated at - 90º- 180º- 270º- 360º
Width - 12” / Height - 23”
RWS-3TC
Portable and easy to use
Heavy steel construction
Performs both mounting and bead breaking operations
Perfect for home or shop use
For full product details and specifications, please visit www.bendpak.com
RST-500ES FEATURES:
49
RSC-2TFFolding Shop Crane
Boom Length - 40”- 63”Boom Capacity - 1,100 - 4,400 lbs.
Boom Height - 80”- 93”
RES-1TFEngine Stand
Holding Capacity - 2,000 lbs.Front Width - 31” / Rear Width - 27.5”
Height - 37.5” / Length - 41”
RST-500ESEngine Support
Holding Capacity - 1,500 lbs.Screw Travel - 18.75”Width - 26.5”- 49.5”
•Adjuststofitallvehicles•Rubberfootpadstoholdloadsecurely•Straddlesinnerfenderwells•Preciselypositionsengineforeasy gearboxandtransmissionremoval•Perfectfor4&6cylinderengines•1,500lb.capacity
•Foldsuprighttoconservespace•Heavysteelconstruction•Longrubber-griphandle•Headswivels360ºforeasypositioning•Heavy-dutyswivelcasters•Slottedadjustablesaddlepermits•Neckisreinforcedforextrastrength
•Designedforshopswithlimitedspace•Foldsforeasystorage•Heavy-dutysteelcasters•Neckisreinforcedforextrastrength•Widebaseformaximumstability•Telescopingboomprovides4positions•Heavysteelconstruction
RES-1TF
1645 Lemonwood Drive • Santa Paula, CA USA 93060 • Tel: 1-805-933-9970
RST-500ES FEATURES: RES-1TF FEATURES: RSC-2TF FEATURES:
BendPak recognizes the manufacturing process as our moment of maximum influence. When we ship a piece of equipment, we need to know that the product that left our manufacturing complex was the best it could be. That’s why we demand nothing short of the very finest in facilities and machinery. Our primary factory houses development and manufacturing for medium and heavy-duty lifting products and wheel service models. At just over 300,000 square foot it’s a facility designed for maximum efficiency and safety, where we employ the best steel fabrication techniques in the world.
Manufacturing Superiority
MEDiUM AnD HEAVY-DUTY PRODUCTS
BendPak’s second mega-sized manufacturing is used primarily for manufacturing light and medium duty lift products, select parking systems, and select vehicle repair tools and equipment. The multiplex factory houses state-of-the-art equipment including numerically-controlled turning and milling equipment, automated welding systems and full-capability services like comprehensive metallurgy testing, heat treatment, automated powder coating, and other specialty operations. The facility also houses assembly and packaging operation centers and product development testing labs for BendPak’s growing customer base around the globe.
BendPak / Ranger
50 1645 Lemonwood Drive • Santa Paula, CA USA 93060 • Tel: 1-805-933-9970 For full product details and specifications, please visit www.bendpak.com
LigHT AnD MEDiUM-DUTY LiFT PRODUCTS
Our multi-department manufacturing complexes have allowed us to expand machinery and employees and triple our daily production capacity. All BendPak employees are Q.C. trained and follow rigid ISO-9001 guidelines. Every day, more than 700 employees around the world dedicate themselves to putting our core values into action. Safety is first—it’s our company’s top priority, followed closely by environmental responsibility, cost-efficiency, quality, customer service and accountability for all departments. These principles guide our highly skilled workforce towards BendPak’s unified vision.
Across the globe, BendPak’s facilities encompass over 600,000 square feet in total and consist of vertically integrated manufacturing, operations and logistics facilities. Each location follows strict guidelines as outlined by ISO-9000, further supporting our position as a premier global manufacturer. At BendPak, we ensure that our offshore manufacturing is no different in approach, standards, quality, inspection or packaging from our domestic production. These facilities are audited year round and undergo systematic evaluation of documented quality programs such as TUV, ANSI/ALI ALCTV, CSA, UL and AS/NZS 1418.9. The programs themselves are audited quarterly, regardless of the facility location, to ensure continued compliance with all applicable standards.
BendPak, Ranger Products and BendPak / Ranger related marks are trademarks and/or registered trademarks of BendPak Inc.
511645 Lemonwood Drive • Santa Paula, CA USA 93060 • Tel: 1-805-933-9970
Inquire about these certification listings.
1645 Lemonwood Drive • Santa Paula, CA USA 93060 Tel: 1-805-933-9970 • Fax: 1-805-933-9160 • www.bendpak.com
© 2011 BendPak, Inc. • BendPak, Inc. / Ranger Products are registered trademarks.