BENDING OPERATION & BENDING DIES - 800

1
COURSE OVERVIEW This module emphasizes on the theory and application of fundamental of bending operation and bending dies. Participants are taught of the basic techniques and skills in the fabrication process from conception of bending operation of metal part through start of assembly according to the proven progressive bending die set. This course will clearly illustrate the proper design limit or alternative and describe the penalties that can occour in the manufacturing process include calculation parameters involves in die designing bending data parameters sucs as estimated blank size, blank development including calculation of bending dies. COURSE OBJECTIVES At the completion of this course, participants will be able to : • Understand the behavior of the grain structure when subjected to stress during the bending operation. • To have the knowledge on minimum bending radius to be bent without failure, necking and fracture. • Reducing methods against springback in V & U bending die operation. • Be able to identify the problem, causes in bending operation and able to soft the problems. • To have the knowledge to calculate blank development of sheet under bending. THE UNIQUENESS OF THIS COURSE • In-depth coverage of fundamental knowledge. • Practical exercise on servicing the actual industrial die and press machine. • Assistance from experienced trainers throughout the courses. BENDING OPERATION & BENDING DIES KPT(JPS)600-48/B/103(2) NO. PERAKUAN PENDAFTARAN: DK040(B) For further details, please contact: Marketing Section, German-Malaysian Institute (247980-K), Jalan Ilmiah, Taman Universiti, 43000 Kajang, Selangor Darul Ehsan, Malaysia Tel: 03-8921 9191/9046/9322 Fax: 03-8921 9003 Email: [email protected] GPS Coordinate: N 2.934898 E 101.795711 www.gmi.edu.my GMiNewsbreak GERMANMALAYSIANINSTITUTE @gmiofficial92 WHO SHOULD ATTEND This course is designed for those related to the sheet metal industry. Target Group: Product Designers, Design Engineers, Tooling Engineers, Supervisors and Technicians. KEY TOPICS • Bending theory. • Types and characteristic of bending • Type structure and characteristic of bending dies. • Blank development. • Bending force. • Problem/defects in bending operation and their remedies. • Die construction. METHODOLOGY Consist of theory contents, lessons delivery is via lectures and demonstration. COURSE DURATION 2 Days. PRE-REQUISITE Fundamental Press Tool Technology. CERTIFICATION Certificate of attendance will be issued to those who fulfill 80% of attendance. COURSE FEE RM 800.00 per participant Minimum Participant: 6

Transcript of BENDING OPERATION & BENDING DIES - 800

Page 1: BENDING OPERATION & BENDING DIES - 800

COURSE OVERVIEWThis module emphasizes on the theory and application of fundamental of bending operation and bending dies. Participants are taught of the basic techniques and skills in the fabrication process from conception of bending operation of metal part through start of assembly according to the proven progressive bending die set. This course will clearly illustrate the proper design limit or alternative and describe the penalties that can occour in the manufacturing process include calculation parameters involves in die designing bending data parameters sucs as estimated blank size, blank development including calculation of bending dies.

COURSE OBJECTIVESAt the completion of this course, participants will be able to :• Understand the behavior of the grain structure when subjected to stress during the bending operation.• To have the knowledge on minimum bending radius to be bent without failure, necking and fracture.• Reducing methods against springback in V & U bending die operation.• Be able to identify the problem, causes in bending operation and able to soft the problems.• To have the knowledge to calculate blank development of sheet under bending.

THE UNIQUENESS OF THIS COURSE• In-depth coverage of fundamental knowledge.• Practical exercise on servicing the actual industrial die and press machine.• Assistance from experienced trainers throughout the courses.

BENDING OPERATION &BENDING DIES

KPT(JPS)600-48/B/103(2) NO. PERAKUAN PENDAFTARAN: DK040(B)

For further details, please contact:Marketing Section, German-Malaysian Institute (247980-K),Jalan Ilmiah, Taman Universiti, 43000 Kajang,Selangor Darul Ehsan, Malaysia

Tel: 03-8921 9191/9046/9322Fax: 03-8921 9003Email: [email protected] Coordinate: N 2.934898 E 101.795711

www.gmi.edu.my GMiNewsbreak GERMANMALAYSIANINSTITUTE@gmiofficial92

WHO SHOULD ATTENDThis course is designed for those related to the sheet metal industry.

Target Group: Product Designers, Design Engineers, Tooling Engineers, Supervisors and Technicians.

KEY TOPICS• Bending theory.• Types and characteristic of bending• Type structure and characteristic of bending dies.• Blank development.• Bending force.• Problem/defects in bending operation and their remedies.• Die construction.

METHODOLOGYConsist of theory contents, lessons delivery is via lectures and demonstration.

COURSE DURATION2 Days.

PRE-REQUISITEFundamental Press Tool Technology.

CERTIFICATIONCertificate of attendance will be issued to those who fulfill 80% of attendance.

COURSE FEERM 800.00 per participantMinimum Participant: 6