Benchtop - ADTOOL 2009.pdf · atos r engineering company developed the world’s first automatic...
Transcript of Benchtop - ADTOOL 2009.pdf · atos r engineering company developed the world’s first automatic...
The first name in wire processing
Benchtop wire processing products
testing
stripping
specialtystripping
cutting &stripping
accessories
we process the widest r a n g e o f w i r e Bar none
crimping
cutting
ADTOOL Corporation 1-800-361-6727 www.adtool.com
future growth innovation
artos - the first name in wire processing
The first name in wire processing
artos engineering company developed the world’s first automatic wire processingmachine in 1926, and has been the leading supplier in the field ever since. we are firmlycommitted to maintaining that position.
“we have been fortunate to have leaders and employees, past and present, which havecarried out our tradition of excellence, innovative design and impressive service to whichour customers have grown accustomed,” says artos engineering’s president, John olsenii. “artos has always and will always develop robust, technologically advanced machineswith a long history of reliability. it is our mission to be open and receptive to our customers’ wants and expectations and to produce high-quality machines that can beeasily configured to match their specific applications.”
artos remains optimistic about the prospects for growth in the industry, both domesticallyand worldwide. the company is pressing on with new product introductions that areconsistantly innovative and relevant to customers.
“at artos, we recognize that the movement of business globally brings in new challengesand opportunities,” says olsen. “our goal is to continue to grow market share andcultivate continued growth in all segments as we anticipate the approach of our 100th
anniversary.”
in keeping with the spirit of growth and innovation, we are proud to announce that artoshas moved to a new, state-of-the-art world headquarters in Brookfield, wisconsin. ournew facility allows us to better serve our customers and growing product demand throughincreased production capacity and high-tech engineering lab, testing and service facility.
contact us for any of your machine needs at:artos engineering company
21605 Gateway Court • Brookfield, WI 53045Phone (262) 252-4545 • FAX (262) 252-4544
e-mail: [email protected]
note: specifications are subject to changes withoutnotice, and exceptions may apply depending on application,wire and other variables.optional equipment may require standard machinemodification and/or later specifications.
ADTOOL Corporation 1-800-361-6727 www.adtool.com
wire and caBle cutter
wire prepper lite
wire prepper system ii
Model 45-048
Model 45-725 / 45-730
Model 45-700 / 45-705
technical data
technical data
technical data
perfect for low volume processing of wire and cable
foot pedal operated
Maximum blade opening is 1 in. (25.4mm)Blade is 3-1/2 in. (88.9mm) long
Shears wire and cable up to 1 in. (25.4mm)diameter and bundles of small wires ofaluminum or copper with absoluteminimal conductor distortion
Processes #12 stranded to #30 AWG wire andup to 5/16” in. od multi-conductor cable, tubingand heat shrink
portable and light weight, less than 20 lbs.complete set-up change, less than one minute,including changing wire reel. no tools required
fully electronic user friendly controls
equipped with heat treated steel blades for a longlife and repeatable clean cuts
Processes up to 13,700 pieces per hour
processes medical grade tubing, heat shrink, rubbercable, #30 to #10 AWG wire and up to 3/8 in. odpower cable
complete set-up change in less than one minute
stores up to 99 batch programs
equipped with heat treated steel blades,optional ceramic and carbide blades available
automatic cut-off switch to maximize operatorsafety
encoder provides improved length consistency
Processes up to 17,100 pieces per hour
wire sizeTo 1 in. (25.4mm) diameter (wire dependent)
cut length:Wire Stop is adjustable to 16 in. (406mm).longer cut lengths can be achieved by removing the wire stop.
cut lengths: minimum: .06 in. (1.6mm) maximum: 9,999.99 in. (25m)cut Quantity: minimum: 1 maximum: 9,999cut capacity: Wire: #30 AWG (.05mm2) min. #12 awg (6mm2) stranded Cable: Up to 5/16 in. (7.9mm) o.d. multi conductordrive speed: 50 FPM (15.4 MPM)feed wheel: tungsten carbide grit coatedvoltage: 120v or 220v reversible fuse 50hz or 60hz
cut lengths: minimum: .06 in. (1.6mm) maximum: 9,999.99 in. (25m)cut Quantity: minimum: 1 maximum: 9,999cut capacity: Wire: #30 AWG (.05mm2) min. #10 awg (6mm2) stranded Cable: Up to 3/8 in. (9.5mm) o.d. multi conductordrive speed: 146 FPM (46 MPM)feed wheel: tungsten carbide grit coatedvoltage: 120v or 220v reversible fuse 50hz or 60hz
cutting eQuipment wire
we process the widest r a n g e o f w i r e Bar none
ADTOOL Corporation 1-800-361-6727 www.adtool.com
cutting eQuipment flat material-tuBing
The first name in wire processing
measure & cut-off machine
measure & cut-off machine
corrugated tuBing cutting system
Model C-8
Model C-4/5
model c-9
system drives both feed rollers, ensuringprotected material & precise cuts
each blade has three cuttingsurfaces, doubling blade life
microprocessor controlled
material run-out sensor
length calibration capability
reversible Blades
all electric design
The C4/C5 products provide high speedmeasure and cut-off of manyapplications including wire, cable,tubing, tape, labels, textiles, screen,sandpaper, etc.
material is pulled from a reel or spool,measured to a programmed length,and cut with steel cut-off blades
pnuematic feed roller pressure andscissors-cutting action
Processes up to 7,500 pieces per hour
designed to cut unslit corrugated tubingfrom .275-1.25 in. (7-32mm) in diameter
unique cutting process allows for cuttingexactly on the “peak” of the tubing,providing a clean cut completely aroundthe tube
offers quick change of guides (less then2 minutes), for running tubing ofvarious sizes. six sets included
integrated slitting unit to optionally slittubing after cutting process
cutting width max: 3.94 in. (100mm)
maximum feed rate: 11.81 in. (300mm) per second
material length: .394 in. (10mm) - 394 in.(10,000mm)
power supply: 115V/230V 50 Hz / 60 Hz
cut length: Both machines — Maximum: 3,000 ft (999 mm) Minimum: .04 in. (1mm)
cutting width: C-4 —5-7/8 in. - 150mm C-5 —13-1/2 in. - 343mm
material thickness: C-4 —1/2 in. - 12.7mm C-5 —1/4 in. - 6.3mm
feed rate: Both machines — variable from 6.4 in. to 100 in./sec (0.16 to 2.5 m/sec) with adjustable acceleration/deceleration ramps.
power supply: 115V/230V 50 Hz / 60 Hz
corrugated tubing:Standard Unit – .275-1.25 in. (7-32mm)W/large Guide Kit – .390-2.3 in. (10-60mm)
servo Belt feed:up to 1 meter/sec.
lengths:To 3,937 in. (99.999 Meters)
power requirements:3 x 400V/50 or 60 Hz./16A
air requirements:6 Bar (80 PSI)
technical data
technical data
technical data
ADTOOL Corporation 1-800-361-6727 www.adtool.com
power wire stripper
precision rotary stripper
pnuematic wire stripper
power stripper
Model 45-146
Model 45-211A / 45-213A
Model 45-940 / 45-945
Model PS-04
technical data
technical data
technical data
technical data
wire size: 30-8 AWG (.05mm2 - 8mm2)wire strip length: wire stop adjustable to 0.625 in. (15mm) longer partial strips can be achieved by removing the wire stop.air requirements: 60 - 100 PSI (4-7 BAR)
single-Blade precision rotary stripper*description unit weight cat. no.120VAC, 60 Hz 1 14.5 lbs. 45-211A240VAC, 50 Hz 1 14.5 lbs. 45-212Adual-Blade precision rotary stripper*120VAC, 60 Hz 1 14.5 lbs. 45-213A240VAC, 50 Hz 1 14.5 lbs. 45-214A
*one free guide with every unit. please specifypart # when ordering.
strip length: minimum: .060 in. (1.5mm) maximum: 1 in. (25mm)strip capacity: Minimum: #30 AWG (.05mm2) Maximum: #8 AWG (8.0mm2)voltage: 12v dc required. 45-940 – 120V/60Hz 45-945 – for 220V/50air pressure: 60-100 PSI (4-7 bar)Blade type: hardened steel v-blades supplied. heat treated, fixed die or fixed knife or radius blades are availableproduction rate: 2,200 pieces/hour
stripping range: .11 - .79 in. (3-20mm)cross section range: 14-6AWG (2 - 14mm2) infeed-length: .866 in. (22mm)power supply: 115V/230V 50 Hz / 60 Hz 100v acycle time: 1.5s
stripping eQuipment descrete wire
we process the widest r a n g e o f w i r e Bar none
instant, accurate, effortless stripping of30 to 8 AWG (.05mm to 8mm2) wire
performs medium to high volumestripping with minimal investment
utilizes pneumatic power with footpedal actuation
accepts die blades for teflon and otherdifficult insulation. Includes l-4421 bladesfor stripping 10-22 awg
Precision, nick-free stripping of 16 to 28 AWG(1.5mm to 0.8mm) wire
single-blade models easily handle strippedinsulation grades, including teflon®
dual-blade handles tight adhering insulationgrades, including Kapton®, and is especiallygood for small gauge to 30 AWG
rotation direction can be either clockwise orcounter-clockwise to match lay of standard wire
Automatically strips insulation from #8 AWG to #30 AWG
electronic cycle control with lcd display monitorsstrip settings
pnuematic stripping operation electronicallyadjustable to 1 in. or 25.4m
partial strip possible
standard v-blades or optional radius bladesavailable ensuring precise stripping requirement
electric-motor driven
Quick and reliable stripping of larger cable14-6 AWG (2mm2 to 14mm2)
variable adjustment of stripping length and pull-off length between 0.118-0.787 in. (2-20mm)
integrated spare blade
ADTOOL Corporation 1-800-361-6727 www.adtool.com
stripping eQuipment multi conductor/large
The first name in wire processing
lever strippers
large wire rotary stripper
heavy duty pnuematic stripper
Model 45-064 / 45-065
Model 45-199 / 45-200
model am-1 / am-2
technical data
technical data
technical data
perfect for low volume processing of wire, cable,rubber, plastic, fiberglass and fabric
long lever swings two knife-type blades,cutting insulation and removing slug withminimal force
round blades will strip down to finestwire provided sufficient insulationthickness
strips multiple wires with onestroke using parallel flat blades
strips parallel ribbon cable and cable up to 1-1/8 in. (2.86cm) diameter
large selection of blades available. see www.artosnet.com
wire size:Conductor diameters from 0.039 in. (1mm) to1.125 in. (28mm)strip length:Full strip removal to 2.5 in. (63mm)longer strips possible with partial stripping.note: Blades are not included in Base machines
description cat. no.Standard lever-Stripper 45-064large lever-Stripper 45-065
wire size: .120” to .750” Insulated od (3mm-19mm)strip length: Up to 5.5” (139.5mm)remove stop-rod and post for longer strips
voltage:115 VAC, 60 Hz, 1.4A (45-199)220 VAC, 50 Hz, .54A (45-200)
description cat. no.large Wire Rotary Stripper 115V 45-199large Wire Rotary Stripper 220V 45-200
am-1
strip length: 3/16 - 2 1/2 in. (4 - 63mm)max wire size: 4 AWG (20mm2) 1/2 in. (12mm) o.d.air requirement: 80 PSI (5.5 Bar)
am-2
strip length: 3/16 - 4 3/4 in. (4 - 120mm)max wire size: 0000 awg (100mm2) 1 in.(25mm) o.d.air requirement: 80 PSI (5.5 Bar)
Processes larger wires and cables to .750 in.(19mm) diameter
dual blade ensures clean, square cuts
Blade depth is secured by a locking screw toeliminate nicking
wire guides are changed easily and withouttools
value priced to minimize investment
all-pneumatic operation for powerful andreliable results
easy wire loading & operation
adjustable strip control for v-style strippingblades
flexible blade configuration for difficultapplications
includes 1 set of standard stripping blades
ADTOOL Corporation 1-800-361-6727 www.adtool.com
RoTARy CoAXIAl CABle STRIPPeR
twin wheel stripper
fiBer cone stripper
thermo-strip wire stripper
Model 45-201 / 45-204
Model 45-159A / 45-269A
Model 45-157A / 45-267A
Model 45-130
technical data
technical data
technical data
technical data
stripping eQuipment specialty
we process the widest r a n g e o f w i r e Bar none
three separate stripping heads for three stagestripping
stripping length easily adjusted withouttools
interchangeable wire guides betweenall heads
simple operation allows for minimal training
value priced to minimize investment
heavy duty design for challenging stripping applications
uses various grades of wire and fiberglass brushesto strip wire from 46 to 4 AWG (0.001mm2 to 25mm2).
handles any known film insulation type
removes oxides from component leads quickly andeasily
finger guard protection maximizes operator safety
wheel opening is easily adjusted without tools
cones remove all types of film wire insulations
design enables wire stripping to within 1/7 in. (3.2mm) of small parts coils, armatures, etc.
finger guard assures operator safety
ideal for transformer coil, motor, alternators, etc.
cone width is easily adjustable without tools
available in both 115 and 220 vac
Adjust the heat up to 1800˚F (982˚C)
five different preformed heated elementsavailable: 3/8” diameter to 36 AWG
hand tool or Bench top capable
wire size: 45-201 .028 - .201 in. (.7 - 5.1mm) 45-204 .028 - .265 in. (.7 - 6.7mm)strip length: Up to 3 in. (76.1mm)voltage: 115 VAC, 60 hz, 1.4A (45-201) 220VAC, 50 hz, .54A (45-204)
description cat. no.Rotary Coaxil Cable Stripper 120V, 60hz 45-201Rotary Coaxil Cable Stripper 220V, 50hz 45-204
wire size: 46-4 AWG (0.001mm2 - 25mm2) (wire dependent)
wheel opening: Adjustable to 0.40 in. (10mm)
description cat. no.Twin Wheel Stripper, 115VAC, 60Hz 45-159ATwin Wheel Stripper, 220VAC, 50Hz 45-269Afiber glass wheel, generalPurpose 25-46 AWG Wire l-6063
wire size: 46-30 AWG (0.001mm2 - 0.05mm2) (wire dependent)wire size: From 0.125 in. (3.2mm)cone width: adjustable to 0.200 in. (5mm)voltage: 115 VAC, 60 hz, 1.4A (45-201) 220VAC, 50 hz, .54A (45-204)
standard optional optional
optional optional
ADTOOL Corporation 1-800-361-6727 www.adtool.com
crimping eQuipment The first name in wire processing
pnuematic crimping unit
crimping die
programmaBle crimping machine
model ltc-1
model airmatic 950/951/952
model tu-10
technical data
technical data
technical data
compact and powerful, the ltc-1 deliversup to 1200 lbs. (@100psi) of crimpingforce to ensure a tight quality crimp
effectively sized and light weight, it is easily moved
ultilizes affordable & available interchangeablecrimping dies
simple change-over of crimping dies(less than 30 seconds)
superior, integrated pnuematic feedprovides smooth terminal feeding &speed adjustment
setting the feeding stroke and pick-up location easilyadjusted
the original and still best in classservo motor driven operationfor precise motion control
Programmable stroke 0-40mm
optional programmable crimp height,crimp force monitor, pnuematic feed,or pc interface
accepts most die units
air supply: 80-100 PSI (5.4 - 6.8 BAR)
terminal uses: insulated and un-insulated ring and forks, f-crimp loose terminals, modularcommunication plugs, coaxial connectors, pinconnectors, splice terminals, fiber opticconnectors
wire range: Up to 8 AWG (8 mm2). wirerange will vary depending on terminal type and wire design.
pneumatic feed: improves crimp monitor systems by eliminating force “noise” caused from the feeding cams in the mechanical die unit.
tooling and anvils: are easily changed due to the innovative design
crimping heights: conductor and insulation crimps can be independently adjusted inincrements of 0.050 in. (0.02 mm)
airmatic dies: can crimp wires from28 – 10 AWG (.08 – 6mm2)
— available for side feed & end feed terminals
stroke: Programmable 0 to 40 mm (0 -1-5/8“)
crimp height:micro adjust (optional programmable)+/-2.5 mm from nominal
force rating:2500 lbs or 5000 lbs (1100 Kg or 2200 Kg) power supply: 115V/230V 50 Hz / 60 Hz
air requirement: required for options only
ADTOOL Corporation 1-800-361-6727 www.adtool.com
crimping unit
Benchtop crimping unit
large wire crimping unit
Model CRIMPMATIC 963
Model CRIMPMATIC 970
Model CRIMPMATIC 971
technical data
technical data
technical data
crimping eQuipment continued
we process the widest r a n g e o f w i r e Bar none
effective crimping for high volume reel feed terminals
accepts most die units with 1.625 inch stroke, including artos airmatic family of terminal applicators
Up to 4500 lbs. of crimping force to handle difficultapplications with ease
features a convenient work light and manual fine adjustment of crimping height to simplify set-up and ease of operation
available with optional crimp quality monitor and reject wire chop off
Quiet electronic drive, terminal reel holder
operator foot switch safety guard system
processes terminals in reels or individually
maximum wire diameter capacity 16mm2 (6 awg)
crimp force: 11 ton/50kn
Quiet electronic drive, terminal reel holder
operator foot switch safety guard system
processes terminals in reels or individually
maximum wire diameter capacity 0000 awg (90mm2)
Crimp force: 33 ton/150kN
crimping force: 4500 lbs. (20kN)
wire range: Up to 8 AWG (8mm2) wire terminaldependent
stroke: 1.625 in. (42mm) Fixed
lower dead center: 5.35 in.(135.78mm) with fine adjustment
cycle time: 0.30 Second
voltage: single phase 110v, 60hz, or 220v, 50hz
air supply: 80 PSI (6-8 Bar)
wire range: up to 6 awg (16mm2)
crimping force: approx. 11,000 lbs. (50kn)
voltage: 3 Phase 400 Volt 50Hz 0r 3 Phase220volt 60hz
pnuematic supply: 6-8 Bar (80 PSI)
stroke: 1.732 in. fix (44mm)
lower dead center: 158.4 mm or 135.78mmwith adapter (6.24 or 5.35 in. w/ adapter)
cycle time: 0.5 seconds
wire range: up to 0000 awg (90mm2)
crimping force: Approx. 33,000 lbs. (150kN)
voltage: 3 Phase 400 Volt 50Hz 0r 3 Phase220 volt 60hz
pnuematic supply: 6-8 Bar (80 PSI)
stroke: 44mm fix (1.732 inch)
lower dead center: 158.4 mm or 135.78mmwith adapter (6.24 or 5.35 inch w/ adapter)
cycle time: 1.5 second
ADTOOL Corporation 1-800-361-6727 www.adtool.com
stripping & crimping eQuipment
The first name in wire processing
stripper crimper
seal strip & crimp
strip & crimp unit
Model STRIPMATIC 944
Model SeAlMATIC 944S
model fp-1
technical data
technical data
technical data
combines stripping and crimping processes to provideimproved quality and efficiency
integrated stripping unit will strip the inserted wire whilebeing held in the crimping position. this ensures the proper strip length and positioning of the end of the wire in the terminal, improving overall crimping quality
electronically controlled crimping unit features a job button for ease of set-up
accepts side feed or end feed terminals
integrates perfectly with the artos airmaticterminal applicators
crimping force: 4500 lbs. (20 kN)
wire range: 26 - 14 AWG (0.14 – 2.5mm2)
wire stripping length: .04 - .40 in. (1 to 10 mm)
stroke: 1.625 in. (42mm) Fixed
lower dead distance: 5.35 in.(135.78 mm)
cycle time: 1.0 second
voltage: single phase 115V/230V 50 Hz / 60 Hz
air supply: 80 PSI (6-8 Bar)
crimping force: 4500 lbs. (20 kN)
wire range: 26 - 14 AWG (0.14 – 2.5mm2)
wire stripping length: 0.04 - .40 in. (1 to 10 mm)
seal dimensions: Max. 0.4 in. (10 mm), max. length 0.4 in. (10mm)
voltage: 230V, 50 Hz or 110V, 60 Hz (110V with transformer)
pneumatic supply: 6 - 8 bar (80 PSI)
stroke: 1.625 in. fix (41mm)
lower dead center: 5.35 in. (135.78mm)
cycle time: 2.1 sec
crimping range: 20-14 AWG (0.5 - 2.5mm2)
Crimping length: 8mm
cycle time: 1 second
voltage: 115V/230V 50 Hz / 60 Hz
Pnuematic Suipply: 80 PSI
offers the additional capability of inserting a weatherseal onto the wire
cut wires are stripped, have a loose weather seal insertedon the wire, and crimped
operations completed without wire movement, ensuringease of operation and quality
operates exclusively with the artos airmatic terminalapplicators, and accommodates most side feedterminals
available with optional crimp quality monitor andreject wire chop off
electro-pnuematic driven striper-crimper
Quick and reliable processing of loose insulatedferrules, perfect for panel building and otherwiring
Crimping range is .02 - .098 in. (0.5 - 2.5mm2)
Crimping length is 0.315 in. (8mm)
no tooling change required
ADTOOL Corporation 1-800-361-6727 www.adtool.com
servo driven wire processor
Bench top wire processor
Model CS-326
Model CS-338
technical data
technical data
cutting and strippingeQuipment
we process the widest r a n g e o f w i r e Bar none
Totally electronic and fully programmable, the CS-326servo driven wire processor is truly a “ high-tech workhorse.”it features two breakthrough technologies: (1) remarkablemicrocontroller system, custom designed to control the most de-manding wire stripping applications and (2) powerfulservo driven design, able to provide a degree of speed and accuracy that’s simply not possible with stepper motor designs. By combining these two innovations into oneelectronic design, artos makes your wire stripping duties fast, reliable and economical. with the optional work table, you can roll this machine up and plug it in near any workstationin your plant
removable slug collection tray, push button operation
all wire-related guides can be changed withouttools
all-electric design eliminates pneumaticrequirements and reduces maintenance
maintenance-free brushless servo motorsensure reliability and long life
computerized diagnostics and maintenancescreens make troubleshooting easy
Universal switchable 115/230 VAC 50/60hZ single phase power
Belt or roller feed system available
Bench-top programmable wire processor automatically measures, cuts, and strips wires in the range of 30-8 AWG
tracker belt wire-feed system ensures gentle and precise handling of a wide variety ofinsulation types
ergonomic, angled operator display for fastand easy input, stores up to 99 programs
lever belt openers for quick change of wireand automatic feed pressure
wire sizeminimum: 30 AWG (0.05mm) wire dependent
maximum: 1/2 in. (12.5mm) o.d. or 4 AWG (25mm2)optional kit to 5/8 in. (15mm)
wire cutting lengthsminimum: 1/4 in. (6.4mm)maximum: 3900 in. (100M)
wire stripping lengthsminimum: Programmable to 0.01 in. (.254mm)maximum: 39 in. (1000mm) wire dependent
power supply: 115V/230V 50 Hz / 60 Hz
wire range:30-8 AWG (0.05-8mm2) wire dependentmaximum material o.d.:0.25 in. (6.35mm)
wire cutting lengths:0.60-3,937 in. (1.4-99.999mm)
wire stripping length:0.01-2.00 in. (0.254-50.8mm)
machine output:over 2,000 pcs./hr (rate is dependent onapplication)
power supply: 115V/230V 50 Hz / 60 Hz
ADTOOL Corporation 1-800-361-6727 www.adtool.com
wire prefeeding eQuipment
The first name in wire processing
premium wire de-reeler
light duty prefeeder
medium duty prefeeder
Model 45-712
Model 45-714A
model pf-6
technical data
technical data
technical data
for use with any wire processing equipment and 6” to 16” dia. wire reels
non-motorized de-reeling for any processor
avoids wire tangles and over spooling
For use with wire 30-8 AWG(0.05 - 8mm2)
allows for the automatic de-reeling of wire from spool
designed for use with any bench top automaticwire-processing machine
features a belt feed material transport and infinitelyadjustable speed control
eliminates wire tangles, wire mis-feeds, andlength variations
weight: 15 lbs. (7 Kg)
spool size: 6 - 16 in. diameter (152 - 406mm) 11-1/2 in. (290mm) wide
spool weight: Up to 60 lbs. (27 Kg.)
spool size: diameter to 18 in. (450mm)Width to 14 in. (350mm)
material size: up to .200 in. (5mm)
feed rate: Up to 7.3 ft./min. (2.2 M/Sec.)
electrical requirements: 110v, 60hz, 2 amp or 220v, 50 hz, 1 amp (220v is extra charge)
spool weight: Max: 150 lbs. (68 kg)
spool diameter: Max: 24” (609mm)
spool width: Max: 16” (406mm)
electrical requirements: 110v/60hz./1 ph or 220v/50 hz./1ph
feed rates: Max: 820 ft/min. (4 M/sec)
air requirements: none
optional equipment available:9 pulley wire storagecradle rollers for heavy reelsspecial Kits for ribbon wire and ignition wire
eliminates wire tangles, misfeeds and lengthvariations
Payout rate of up to 4 M/Sec. (820Ft./Min)
improved loading features including: arm lock,improved side-plate design, and easier wirethreading
3 pulley wire storage
strong control arm and excellent motorcontrols
heavy duty large reel option
Reels up to 32 in. diameter,20 in. width
allows for two different reelsto be loaded at same time
ADTOOL Corporation 1-800-361-6727 www.adtool.com
motoriZed linear long wire collector
motoriZed dual Bowl wire coiling system
motoriZed level wind coiling system
model al-series
model cd-11
model cd-15
technical data
technical data
technical data
wire collection eQuipmentwe process the widest r a n g e o f w i r e Bar none
independent operation - does not require specialinterface for most machines
special brake feature eliminates belt rubs on yourwire
Collection length up to 10 meters (32 ft.)
optional batch sorter available
collectors efficiently bundle long wires processedon the wire cutting and stripping machine
coils wires for easy handling
two bowl sizes
Collects wires up to 100 ft. (30M) depending onwire diameter
For use with Artos Models CS-26, CS-27 & CS-326
dual Bowl system allows one bowl to be loadedby the wire processing machine while the secondbowl is unloaded
conveyor lengths: model al-1500 1.5 meters (5 ft.) Model Al-3000 3 Meters (9 Ft.) model al-5000 5 meters (16 ft.) Model Al-10000 10 Meters (32 Ft.)
wire sizes: 22 - 4 AWG(0.35 - 17.0mm) application dependent
power supply: 115V/230V 50 Hz / 60 Hz
pneumatic requirements: 5.5 Bar (80 PSI)
Bowl diameter: Choose from 12 in. or 16 in. (304mm or 406mm)
power supply: 115V/230V 50 Hz / 60 Hz
air requirements: 5.5 Bar (80 PSI)
cable diameter: up to 12.5mm (1/2 inch)
inner coil diameter: adjustable from 100 to 305mm (4 to 12 inches)
coil height: Adjustable to 100 mm (4 inches)
power supply: 115V/230V 50 Hz / 60 Hz
pneumatic requirements: 6 Bar (80 PSI)
total cable length: up to 100m (actual maximum lengths may vary depending on cable diameter and weight)
Fully integrated with CS-326
adjustable inner coiling diameter
wire lock for consistent coil shape
automatic coil pin retraction and guard opening
cart casters included for easy movement
level winding system guides the cablebeing coiled, controlling coil thickness and providingneat bundles for packing
ADTOOL Corporation 1-800-361-6727 www.adtool.com
measuring range: 0 - 110 lbs. (model dependent) 0-50 kg 0-500n
resolution::1/5000
accuracy: .5%
opperating mode: displays actual value in lbs, kg, or n
wire diameter: 30-12 AWG (0.05-4mm2) wire dependent
wire Quality eQuipmentThe first name in wire processing
automatic crimp pull tester
manual crimp pull tester
Bench top wire marKer
Bench top wheel stamp marKer
Model PT-3A
Model PT-3M
model wm-6/B
model Kip-20
measures pull-off force on most soldered orsolderless wire terminals, crimped connectorsand similar wire terminations
seven selectable pull speeds from1 in./min. up to 10 in./min
precision strain gauge sensing providesa resolution with a accuracyof 0.5%
PT-3A suitable for wires AWG 30-8
RS 232 output allows for computer interface
measures pull-off force on most soldered orsolderless wire terminals, crimped connectorsand similar wire terminations
precision strain gauge sensing providesa resolution with an accuracyof 0.5%
PT-3M accommodates wires AWG 30-12
RS 232 output allows for computer interface
hot stamp marking of wire & cable
flexible, easy installation bench top or machine mounting
simple-to-change foil and type designs
adjustable controls for dwell, temperature andpressure
two stamping anvils with separate foil for end or continuous marking
the fastest hot stamp wire printer on the market today
Utilizes full-size 40 character typewheelsprinting horizontally or vertically
Quick-change fixture system minimizes set-up time andmaximizes printing speed
prints on command from virtually any wire processor, cutter,stripper or terminator
operates remotely or with foot pedal
Prints on sizes from .038 in. to 750 in. od
measuring range: 0 - 220 lbs. (model dependent) 0-100 kg 0-1000n
resolution::1/5000
accuracy: .5%
opperating mode: displays actual value in lbs, kg, or n
wire diameter: 30-8 AWG (0.05-8mm2) wire dependent
power supply: 115V/230V 50 Hz / 60 Hz
pneumatic requirements: 80 PSI (5-8 bar)
air consumption: 1.26 ft3/hour (36 lt/Hr) at 4,000 Cy/Hr
max. # of characters: 16 on each end, total is 32 - curved and flat type available
wire size: 0.038 - 0.750 in. (1-19mm)operation: pneumatic/electric, remote signaloperation in conjunction with in-line wireprocessorprinting method: Hot Stamp process, full-size 40 characters per typewheel
printing area: 1 line x 2.9 in. on Sizes .038 in. to .05 in. od note: wire sizes over .250 in. od require special fixturespower supply: 115V,/230V 50 Hz / 60 Hz air requirement: 100 psi / 5 cfm
technical data
technical data
technical data
technical data
wire marKing eQuipment
+
+
-
-
-
-
ADTOOL Corporation 1-800-361-6727 www.adtool.com
wire processing evaluation formthis form is designed to provide assistance in determining the wire processing equipment which will best suit your needs. please complete this form as it applies to your application, and return to artos following the instructions below. include a minimum of 10 inches of each wire.
project information (check one): n new project n increase in volume n replacement equipmentestimated volume (check one): n less than 100/day n 100 – 1,000/day n 1,000 – 10,000/day n over 10,000/daywire type (select all needed): n discrete wire • Min AWG ___________ • Max AWG ___________ n multi-conductor • Min od _____________ • Max od _____________ n coax wire n twisted pair n fiber optic wire n magnet wire n flat cable • Total Width ___________ • Cond. Pitch ___________ n other___________________required processing (select all needed) n cutting to length n stripping n inner Jacket stripping n wire marking n termination n doubling n weather seal n twist / tinning n other (describe): ____________________________________ ____________________________________
wire collection eQuipmentwe process the widest r a n g e o f w i r e Bar none
end user information:please enclose a business card or completethe following information:
name:
company:
address:
city, st, Zip:
phone: fax:
email:
stripping requirements: please write theappropriate dimensions for each cable type:
wire/cable
flat cable
three step two step
magnet wire
twisted pair cable
fiber optic cable
multi conductor cable
artos engineering co. attn: technical sales 21605 gateway court Brookfield, WI 53045-5156
send sample material to:
ADTOOL Corporation 1-800-361-6727 www.adtool.com
The first name in wire processing
artos engineering company | 21605 Gateway Ct., Brookfield, WI 53045Phone 262.252.4545 | FAX 262.252.4544 | www.artosnet.com | email: [email protected]
we process the widest r a n g e o f w i r e Bar none
ADTOOL Corporation 1-800-361-6727 www.adtool.com