BELT-DRIVEN LIVE ROLLER CONVEYOR · PDF fileThe Titan Model 404 Belt-Driven Live Roller...
-
Upload
nguyenkhanh -
Category
Documents
-
view
222 -
download
2
Transcript of BELT-DRIVEN LIVE ROLLER CONVEYOR · PDF fileThe Titan Model 404 Belt-Driven Live Roller...
MODEL 404BELT-DRIVEN LIVE
ROLLER CONVEYOR
The Titan Model 404 Belt-Driven Live Roller Conveyor features all of the time proven design features that you’ve come to expect from Titan. Standard Features include 4” diameter drive and tail pulleys, grease sealed industrial 3 bolt flange bearings, heavy duty formed 12 gauge frame and a P.V.C. drive belt. The Model 404 uses 1.9 diam-eter x 16 gauge rollers with 7/16” spring loaded hex shaft and grease-packed bearings. Standard roller centers are 6” with optional 3” and 4 1/2” centers. Compression rollers are also 1.9 x 16 gauge and mounted on 6” centers. Standard be-tween frame widths start at 13” and range to 41”.
NOTE: Specifications subject to change without notice
BELT DRIVEN LIVE ROLLER CONVEYOR SPECIFICATIONSStandard Options
BF Dimensions 13”, 16”, 19”, 22”, 25”, 28”, 31”, 34”, 37”, 40” SpecifyLengths 3’ Min. to 100’ Max.Roller Size 1.9” x 16 ga. with 7/16” hex axleRoller Centers 6” 3”, 4-1/2” Belt Type PVC 120Frame 6 1/2” deep formed 12 ga.Drive 1/2 H.P. 230/460/3/60 3/4, 1, 1-1/2, 2 HP , TEFC, severe duty, inverter
duty, brake motorDrive Pulley 4” dia. crown faced rubber lagged
OPTIONALBelt Type, Drives - Fixed speeds-specify speed req’d., variable speed with DC motor and SCR controller or AC inverter, Motor - 3/4, 1, 1-1/2, 2 HP , TEFC, severe duty, inverter duty, brake motor, Controls, Internal take-up, Center drive, 1”, 3 1/2”, & 6” side rails available, Casters - 4’ or 6” rigid, Side mount drive, Knee braces/ceiling hangers, Bolt on bottom
pans, Galvanized or Stainless steel construction
MODEL 404BELT-DRIVEN LIVE ROLLER
Bulletin 0616_404GH
735 Industrial Loop Road • New London, WI 54961-9612 920-982-6600 • Fax 920-982-7750 • Toll Free 800-558-3616
Website: www.titanconveyors.com • Email: [email protected]
18A
Overall Length
Belt Travel18 Product Flow
A
Belt TravelProduct Flow18" 18"
Overall Length
B
B
C
C
D
D
18"
6 1/2"
1/4" 18"
6 1/2"
9 1/2"
Standard Tail Section Standard Drive Section
Standard End Drive
Standard Center Drive & Take-up
B.F.2 7/16" 3 5/8"
21"
B.F.3 3/4" 1 1/2"
16"
6 1/2"
Standard Center Drive & Take-up Standard End Drive
B.F.
B.F. +3 15/16"
B.F.
B.F. +3"
6 1/2"
Standard Tail Section
Standard Intermediate Frame
Section C - C
Section B - B
Section A - A
Section D - D
7 1/4"7 5/8" (IC-45)9 1/4" (IC-60)
32 1/8"
18A
Overall Length
Belt Travel18 Product Flow
A
Belt TravelProduct Flow18" 18"
Overall Length
B
B
C
C
D
D
18"
6 1/2"
1/4" 18"
6 1/2"
9 1/2"
Standard Tail Section Standard Drive Section
Standard End Drive
Standard Center Drive & Take-up
B.F.2 7/16" 3 5/8"
21"
B.F.3 3/4" 1 1/2"
16"
6 1/2"
Standard Center Drive & Take-up Standard End Drive
B.F.
B.F. +3 15/16"
B.F.
B.F. +3"
6 1/2"
Standard Tail Section
Standard Intermediate Frame
Section C - C
Section B - B
Section A - A
Section D - D
7 1/4"7 5/8" (IC-45)9 1/4" (IC-60)
32 1/8"