BEGO blasting devices · BEGO blasting devices – four helpers for your laboratory EasyBlast...

www.bego.com

BEGO Bremer Goldschlägerei Wilh. Herbst GmbH & Co. KGWilhelm-Herbst-Str. 1 · 28359 Bremen, GermanyTelephone +49 421 20 28-0 · Fax +49 421 20 28-100E-mail [email protected] · www.bego.com Partners in Progress

BEGO blasting devicesEasyBlast, Korostar plus, Protempomatic plus and Duostar plus – four reliable partners for your laboratory

• 100% more light (5,000 lux) for shadow-free work

• Quality assurance thanks to earliest possible detection of cracks in the ceramic

• Extremely cost-effective: low-maintenance and economical consumption

• System-tested group of devices for individual requirements

The fi rst blasting devices with

LED technology

Blasting devices with LED technology

BEGO filter module – for the highest level of safety in your laboratory

The cobalt and quartz dust inevitably produced in the labora-tory during, for example, the polishing or sandblasting of nearly all dental technology work, is suspected to be carcinogenic.Protect yourself and your staff from carcinogenic dust!Within the dental industry, only the BEGO filter moduleprovides you with the highest protection level from Class H dust.

As an optimal complement to our blasting devices, we recom-mend the BEGO filter module, which offers you many advan-tages in terms of occupational safety and value for money.

Highest level of occupational safety:• Complies with the highest protection class H (this means that

every unit is checked to assure the H classification)• Efficiently protects you from carcinogenic dust

Value for money:• The available automatic switch-on function is ideal at enabling

the filter module to be used in direct combination with the blasting devices

• The module is automatically switched on and off by the activa-tion or deactivation of the blasting device

• The power consumption is reduced, costs are lowered and the environment is protected

Push & clean function:• For constantly high suction, even with an increasingly full filter

BEGO filter module

What does Dust Class H mean?

• While dust in the Dust Classes L and M counts as “light” and “medium”, dust (e.g., cobalt) in Class H is categorised as highly hazardous due to its carcinogenic properties.

• Safe work with such hazardous dust requires fi ltering of 99.995% of the dust as well as dust-free disposal of the fi lter – the BEGO fi lter module enables both!

BEGO fi lter module

Technical data

• Height 595 mm

• Width 383 mm

• Length 455 mm

• Rated voltage 220-240 V, 50/60 Hz

• Power at rated voltage 230 V 1,200 W

• Weight 10 kg

Scope of delivery REF

• Filter module cpl. with 1 Class H fi lter element, 1 safety fi lter bag, 1 suction tube with hand tube

Accessories Contents Unit REF

• Class H fi lter element 1 18346

• Safety fi lter bag 5 1 pack 18347

BEGO blasting devices – four helpers for your laboratory

EasyBlast

EasyBlast For a perfect view during preparation

Simple, multifaceted and ergonomic• Integrated LED illumination in the pencil blaster for optimal,

shadow-free vision when preparing – even within the crown• For thorough removal of investment material and oxides in order

to avoid unwanted biological reactions in the patient• With the help of the LED technology it is possible to detect

cracks in the ceramic as early as during the sandblasting – earliest possible quality assurance and avoidance of subse-quent complaints

• LED illumination in the blasting chamber offers a service life up to 10 times longer than conventional lamps for cost-efficient working

• The new EasyBlast can be upgraded with 2 additional blasting modules to create a 4-chamber blasting device – that saves you buying another device

• The intelligent colour-coding system on the tanks and in the sandblasting chamber with the aid of LED lights makes it impossible to mix up the blasting material

• EasyBlast basic is a version of EasyBlast, but does not have LED technology integrated in the pencil blaster

Protempomatic plusFully automatic sandblaster for up to 6 cast partial denture frameworks simultaneously

Effi cient, quick, cost-effective• The integrated aiming sight in the nozzle allows the workpiece to

be placed exactly in the sand jet for quick, efficient blasting• Efficient use of blasting material underscores cost-efficient

working• The LED illumination in the blasting chamber has a service life

up to 10 times longer than conventional lamps, which ensures reduced maintenance costs and cost-efficient working

• The swivelling nozzle makes it possible to use the device as an automatic or manual blasting device – for maximum application possibilities in your laboratory

• The nozzle has a magnetically lockable start position to aid the precise setting of the optimal nozzle angle during automatic and manual blasting for optimal blasting results

• The inspection window is secured with a magnetic switch: When it is opened, the blasting is interrupted immediately – for highest occupational safety

• The basket can be removed with just one simple movement – for even more convenience during manual blasting

• Protempomatic is also available without a filter module for connection to the central extraction unit

Protempomatic plus

Technical data

• Height 540 mm

• Width 400 mm

• Depth 410 mm

• Rated voltage 100-240 VAC, 50/60 Hz, plus only 230 VAC, 50/60 Hz

• Power at rated voltage 230 V 1,225 W (plus), 25 W (Z)

• Compressed air connection 4-6 bar (0.4-0.6 [MPa]), 1/4"

• Air consumption approx. 120 l/min

• Capacity 8 kg

• Weight without blasting material 32 kg (plus), 20 kg (Z)

• Protempomatic plus incl. fi lter module cpl. with 1 Class H fi lter element, 1 safety filter bag, 1 suction tube with hand tube

• Protempomatic Z, for connection to the central extraction unit

Duostar plusMultifunctional due to the combination of a micro blaster and circulatory sandblaster

The all-rounder in the laboratory• Integrated LED illumination in the pencil blaster for optimal,

to avoid unwanted biological reactions in the patient• LED illumination in the blasting chamber offers a service life up

to 10 times longer than conventional lamps for cost-efficient working and reduced maintenance costs

• Combines the properties of 2 devices in a compact unit, offers the advantages of a micro blaster device and a circulatory sand-blaster and is consequently the ideal, cost-effective investment for small and medium-sized laboratories

• Duostar is also available without a filter module for connection to the central extraction unit

Korostar plus

Korostar plusIdeal blasting device for manual, cost-efficient working

Sturdy and strong• The ergonomic design offers a relaxed attitude to working and

leaves your hands largely free so you can work comfortably• Low-maintenance and economical thanks to the use of many

wear-resistant components • Reliable even under greatest load• The injector nozzle guarantees an optimised proportion of

blasting material in the compressed air stream of the blasting material circulatory system

• Large loading lid and well-lit blasting chamber• LED illumination in the blasting chamber offers a service life up

to 10 times longer than conventional lamps and reduces mainte-nance costs

• Korostar is also available without a filter module for connection to the central extraction unit

Duostar plus

Korostar plus

Technical data

• Height 540 mm

• Width 400 mm

• Depth 410 mm

• Capacity 8 kg

• Korostar plus incl. fi lter module cpl. with 1 Class H fi lter element, 1 safety filter bag, 1 suction tube with hand tube

• Korostar Z, for connection to the central extraction unit

EasyBlast

Technical data

• Height 345 mm

• Width 400 mm

• Depth/depth with additional tanks 425/505 mm

• Rated voltage 100-240 VAC, 50/60 Hz

• Power 25 W max.

• Nominal width for connection to extraction unit

• Weight without blasting material Without additional tanks: 10.9 kg With 2 additional tanks 13.9 kg

• EasyBlast with 2 blasting material containers and 2 illuminated pencil blasters

For connection to the central extraction system, with replaceable nozzles for different sizes of grain, initial fill of the blasting material

• EasyBlast basic with 2 blasting material containers and 2 pencil blasters without LED lighting

Duostar plus

Technical data

• Height 590 mm

• Width 400 mm

• Depth 420 mm

• Rated voltage 100-240 VAC, 50/60 Hz, plus just 230 VAC, 50/60 Hz

• Capacity of circulatory system 8 kg

• Capacity of pencil blaster 700 g per container

• Duostar plus incl. initial filling, micro blasting material container Korox® 110/Perlablast® micro, 2 micro pencil blaster nozzles with LED illumination Ø 1.2 mm / 0.8 mm, incl. filter module with 1 Class H filter element, 1 safety filter bag, 1 suction tube with hand tube

• Duostar Z, for connection to the central extraction unit

Subject to modifi cations in design, scope of delivery and composition. Our instructions for use and recommendations are based on our own experience and trials and can only be regarded as guidelines. Date of issue: February 2015.

Can be upgraded with up

to 4 blasting modules

Precision and cost-efficiency are of the utmost importance when it comes to the preparation of crowns, bridges and partial dentures.That is why the requirements placed on blasting devices are especially high: when it comes down to it, they have to work reliably in everyday use in the laboratory and must guarantee a consistently high quality.For this reason, we have optimised the newest generation of our blasting devices for you: They are now even brighter, preciser and more cost-efficient than ever before – all so that you can work even more professionally and with state-of-the-art technology.

All new BEGO blasting devices – quality “Made in Germany” – are equipped with trendsetting LED technology, so that there is always light where dental technicians need it – in the crown.

With their predominantly wear-resistant components, the devices are particularly sturdy and also set standards in terms of quality assurance, user-friendliness and sustainability.

EasyBlast

Protempomatic plus

Technical data

• Height 540 mm

• Width 400 mm

• Depth 410 mm

• Capacity 8 kg

Korostar plus

Duostar plus

Korostar plus

Technical data

• Height 540 mm

• Width 400 mm

• Depth 410 mm

• Capacity 8 kg

EasyBlast

Technical data

• Height 345 mm

• Width 400 mm

• Power 25 W max.

Duostar plus

Technical data

• Height 590 mm

• Width 400 mm

• Depth 420 mm

EasyBlast

Protempomatic plus

Technical data

• Height 540 mm

• Width 400 mm

• Depth 410 mm

• Capacity 8 kg

Korostar plus

Duostar plus

Korostar plus

Technical data

• Height 540 mm

• Width 400 mm

• Depth 410 mm

• Capacity 8 kg

EasyBlast

Technical data

• Height 345 mm

• Width 400 mm

• Power 25 W max.

Duostar plus

Technical data

• Height 590 mm

• Width 400 mm

• Depth 420 mm

www.bego.com

LED technology

BEGO filter module

BEGO fi lter module

Technical data

• Height 595 mm

• Width 383 mm

• Length 455 mm

• Weight 10 kg

• Safety fi lter bag 5 1 pack 18347

www.bego.com

LED technology

BEGO filter module

BEGO fi lter module

Technical data

• Height 595 mm

• Width 383 mm

• Length 455 mm

• Weight 10 kg

• Safety fi lter bag 5 1 pack 18347R

1 · K

BEGO blasting devices · BEGO blasting devices – four helpers for your laboratory EasyBlast...

Documents

Transcript of BEGO blasting devices · BEGO blasting devices – four helpers for your laboratory EasyBlast...