BEAM STOPPERS FOR LINAC 4 Linac4 Beam Coordination Committee – Meeting 31 S. Cimmino/F. Loprete,...
-
Upload
gloria-maxwell -
Category
Documents
-
view
215 -
download
0
Transcript of BEAM STOPPERS FOR LINAC 4 Linac4 Beam Coordination Committee – Meeting 31 S. Cimmino/F. Loprete,...
BEAM STOPPERS FOR LINAC 4
Linac4 Beam Coordination Committee – Meeting 31
S. Cimmino/F. Loprete, EN-STI, Linac4 Design Status Report Meeting – Thursday 24/11/2011
2
Beam Stopper General Presentation;
Thermal Analysis: First Results;
What’s next.
S. Cimmino, EN-STI, Linac4 Beam Coordination Committee – Meeting 31
Overview
3
S. Cimmino, EN-STI, Linac4 Beam Coordination Committee - Meeting 20
Beam Stoppers General Presentation
4
Beam stoppers 160MeV
Maximum H- Current 40 mA
Pulse Length 400µs
Max Rep-Rate (1.1Hz)
Beam Energy 160 MeV
Beam parameters:
“A beam stopper is a mechanical safety device used to intercept a particle beam, to guarantee the personnel safety. (L. Bettazzi, C. Maglioni, EDMS xxx under definition)
S. Cimmino, EN-STI, Linac4 Beam Coordination Committee – Meeting 31
The beam stopper 160 MeV has been designed considering a possible unification between all the beam stoppers from Linac to Ps.
5
Stopper Position
Beam stopper 160MeV
Layout – L4T zone 3
“LINAC 4 ProjectL4T/L4Z Design Status
J.Humbert / B.Riffaudon behalf of EN-MME design team ”
S. Cimmino, EN-STI, Linac4 Beam Coordination Committee – Meeting 31
6
S. Cimmino, EN-STI, Linac4 Beam Coordination Committee – Meeting 31
Design
7
Safety Requirements
S. Cimmino, EN-STI, Linac4 Beam Coordination Committee – Meeting 31
Fail Safe Condition: Pneumatic Failure; Electrical Failure; Control Failure.
8
Material and Dimensions
S. Cimmino, EN-STI, Linac4 Beam Coordination Committee – Meeting 31
9
S. Cimmino, EN-STI, Linac4 Beam Coordination Committee – Meeting 31
Thermal Analysis: First Results
10
Energy Deposition
S. Cimmino, EN-STI, Linac4 Beam Coordination Committee – Meeting 31
0 50 100 150 200 250-100
0
100
200
300
400
500
600
Energy Deposition
FlukaAnsys
Z [mm]
ED
[J/
cm
3*p
uls
e]
X=0;Y=0;
11
Thermal Analysis
S. Cimmino, EN-STI, Linac4 Beam Coordination Committee – Meeting 31
Maximum Temperature is ok
12
S. Cimmino, EN-STI, Linac4 Beam Coordination Committee – Meeting 31
Structural analysis;
Detailed design (Design Office);
Technical Specification for TL beam stopper.
What’s next
13
Thanks
Cesare Maglioni;
Frederic Loprete;
S. Cimmino, EN-STI, Linac4 Beam Coordination Committee – Meeting 31