Bax+sales+book+2012+englisch

465

Transcript of Bax+sales+book+2012+englisch

  • 1. Validity and Terms of DeliveryThis price list is valid as from 1 October 2011.It supersedes all previous price lists.Over a net goods value of EURO 500.00, orders are delivered free of charge to buyers addressin Germany and over EURO 1000.00 to neighbouring countries.In this manual, prices are determined by means of the stated value points (WP).Retailers calculate their individual selling prices with the aid of a conversion factor.A special conversion factor applies for articles marked *) and #).Electronic dataFor computer-aided kitchen planning, the data in this sales manualare available on demand from the company DataformDATAFORM GmbHIm Gefierth 863303 DreieichTel. +49 (0) 6103 9308-510Fax +49 (0) 6103 9308-511www.dataform.deNoteSubject to technical changes in the interests of progress, minor differences in size and colour,errors, innovations, printing errors and technical modifications.The colours reproduced in illustrations may differ from the original colour due to technicalreasons associated with the printing process.This sales manual, including all its pages and any supplements and additionsis and remains the property of the company BAX Kchenmanufaktur GmbH & Co. KG and isexclusively presented to retail customers for the purpose of selling BAX kitchens. Nopart of this manual may be copied or duplicated in any way whatsoever, nor may individualpages or parts of pages of this manual be photographed or traced.On termination of the business relationship with BAX Kchenmanufaktur GmbH & Co. KG,this sales manual must be returned to BAX Kchenmanufaktur GmbH & Co. KG.BAX Kchenmanufaktur GmbH & Co. KGWesterfeldstrae 532758 DetmoldTel.: +49 (0) 5231 - 60 07-0Fax: +49 (0) 5231 - 60 07-20E-Mail: [email protected]

2. ContentsSection Designation PageSummary of ranges 0 / 01K - Melamine, HPL and HPLD fronts K / 01 - K / 27F - Veneer fronts F / 01 - F / 10L - Lacquered fronts L / 01 - L / 16G - Design fronts G / 01 - G / 05M - Multi-layer real wood fronts M / 01 - M / 08R - Wood framed fronts R / 01 - R / 221 Product description 1 / 01 - 1 / 19Furniture board carcase 1 / 10 - 1 / 11Glass fronts / Framed glass doors / Glass types 1 / 12 - 1 / 13Handles / Knobs / Touch-Latch / Touch-Latch Senso 1 / 14 - 1 / 192 Base units System B Carcase height 75 cm 2 / 01 - 2 / 193 Wall units System B Carcase heights 49.5 / 62 / 74.5 / 87 / 99.5 cm 3 / 01 - 3 / 234 Tall units System B Carcase heights 137.2 / 162.5 / 203 / 215.5 / 228 cm 4 / 01 - 4 / 385 Base units System C Carcase height 81 cm 5 / 01 - 5 / 196 Wall units System C Carcase heights 40 / 68 / 80.5 / 93 cm 6 / 01 - 6 / 207 Tall units System C Carcase heights 137.2 / 162.5 / 203 / 215.5 / 228 cm 7 / 01 - 7 / 378 Tall units with glass doors System B and C Carcase heights 137.2 / 162.5 cm 8 / 01 - 8 / 049 Worktops 9 / 01 - 9 / 1010 Roller shutter units and top units System B and C 10 / 01 - 10 / 0511 Chimneys, wall elements, BAX cooking areas 11 / 01 - 11 / 1312 Size changes, special unit systems, supplementary units, 12 / 01 - 12 / 12stainless steel legs, CD system13 Upright panels, pilasters, shelves, open shelf niche units, wall panels, wall shelves, 13 / 01 - 13 / 11rear coverings, shelf grill14 Light pelmets, cornices, ceiling panels 14 / 01 - 14 / 0515 Accessories 15 / 01 - 15 / 3716 Tables, seating furniture 16 / 01 - 16 / 0717 QUADRE The kitchen without handles 17 / 01 - 17 / 7718 COTTAGE The kitchen with front-mounted frames and inset front 18 / 01 - 18 / 6918 CAMARGUE The kitchen with front-mounted frames and overlying front 18 / 01 - 18 / 6903 3. IndexDesignation PageA Accessories:for base units System B and C 2-16 to 2-19, 5-16 to 5-19for wall units System B and C 3-21 to 3-23, 6-18 to 6-20for tall units System B and C 4-31 to 4-38, 7-31 to 7-37for shelves System B and C 13-08B Back panel cladding 13-09Base structure for raised dishwasher 4-37, 6-36Base units System B and C 2-03, 2-13, 5-03, 5-13Basket inserts 15-26Blind panels 2-17, 5-17Bottom ventilation 2-19, 5-19, 15-27Built-in halogen lights and accessories 15-19Built-in LED lights and accessories 15-20Built-under lights 15-18C Carcase variants 1-10, 1-11Carcases for drawers 2-08, 5-08Care set for surfaces 15-31Castors 15-28, 16-05CD system 12-05Ceiling infill panels 14-05Chimneys 11-03 to 11-08Chopping board 9-10, 15-26Continuous front for dresser units 4-38, 7-37Cooker base units System B and C 2-11, 5-11Corner base units System B and C 2-10, 5-10Corner sink units System B and C 2-13, 5-13Corner tall unit with sliding door 12-06Cornices 14-04COTTAGE / CAMARGUE - The kitchen with front-mounted carcase frames 18-01 to 18-69Product description 18-03Summary of ranges 18-09 to 18-14Base units 18-17 to 18-23Wall units 18-25 to 18-41Tall units 18-45 to 18-56Cutlery trays:Solid wood 15-04, 15-12, 15-13Solid wood with velvet base 15-05Plastic 15-04D Dishwasher base structure 4-37, 7-36Dishwashers high installed 4-37, 7-36Drawers / Pull-outs 15-32, 15-33E End-of-row open shelf units:Base units System B and C 2-15, 5-15Wall units System B and C 3-05, 3-09, 3-14, 3-17, 3-20, 6-09, 6-12, 6-16Tall unit system B and C 4-06, 4-10, 4-17, 4-24, 4-31, 7-06, 7-10, 7-16, 7-23End-of-row units:Base units System B and C 2-09, 5-09Wall units System B and C 3-03, 3-06, 3-10, 3-15, 3-18, 6-05, 6-10, 6-14Tall unit system B and C 4-05, 4-10, 4-17, 4-24, 4-31, 7-06, 7-10, 7-16, 7-22Extractor hood accessories 11-13, 15-29Extractor hood open shelf units System B and C 3-05, 3-09, 3-14, 3-17, 3-20, 6-09, 6-12, 6-16Extractor hood units System B and C 3-03, 3-06, 3-10, 3-15, 3-18, 6-05, 6-10, 6-1404 4. IndexDesignation PageF Facet cut 15-30Filler panel for height adjustment 4-38, 7-37Filler strips:Base units System B and C 2-16, 2-17, 5-16, 5-17Wall units System B and C 3-21, 3-22, 6-18, 6-19Tall units System B and C 4-34, 4-35, 7-33, 7-34Fittings 15-17Flat drawers 15-03Folding door elementsFolding step ladder 15-27Frame with door: 12-09Base unit System B and C 2-18, 5-18Wall unit system B and C 3-23, 6-20Tall unit system B and C 4-36, 7-35Framed glass doors 1-13Fronts for built-under appliances System B and C 2-14, 5-14Functional partitioning for drawers 15-06 to 15-10Functional partitioning for solid wood drawers and pull-outs 15-12Furniture board carcase 1-09G Gantry standing table 16-06Glass types 13-10, 15-26Glass containers 1-12Glass shelfs 15-24Glazing bars for glass doors 15-30H Handles /knobs 1-14 to 1-21High capacity pull-out 15-03Hindges 15-31Hob with extractor hood 11-10, 11-11Hob with extractor hood, oxidized iron 11-12Holes for lighting 15-21I Illuminated shelf for wall mounting 15-22Illuminated shelves 15-18Increased side depth 2-16, 3-21, 4-32, 5-16, 6-18, 7-31Installation system for scales 15-26Interior drawers, interior pull-outs 15-03Interior lighting for drawers 15-18Inset rail handle 17-07K Kitchen shelf 13-10Knobs /handles 1-14 to 1-21L Lattice shelves for open shelf units 13-08Le Mans 15-25Legs in stainless steel 12-04Lift mechanism with bread bin 15-26Light pelmets 14-03Locks 15-37M Magic Corner 15-25Middle panels 15-24Mixer tap, sysytem Dornbracht 15-17Motor drives 15-21Mounting bracket 13-08Multi-purpose slicer 15-26Multi-purpose units 2-09, 5-09N Niche panels 13-09Niche wall panels 13-11Non-slip mats 15-0505 5. IndexDesignation PageO Open shelf niche units 13-10Open shelf tall units System B and C 4-06, 4-10, 4-17, 4-24, 4-31, 7-06, 7-10, 7-16, 7-23Open shelf units:Base units System B and C 2-15, 5-15Wall units System C 6-04, 6-09, 6-12, 6-16Tall units System B 4-06, 4-10, 4-17, 4-24, 4-31Tall units System C 7-06, 7-10, 7-16, 7-23, 7-30P Pilasters for base, wall and tall units 13-04Planning principle for 12-11, 12-12supplementary equipment 1 and 2 (pilasters, upright panels)Plate holder shelf 15-10, 15-13Plinth for appliance 2-14, 5-14Plinth Aluminium 2-19, 5-19, 14-05, 15-27Plinth corners 2-19, 5-19Plinth drawer 15-03Plinth lighting 15-20Plinth panel 2-18, 2-19, 5-18, 5-19Pocket door element 12-10Pot grill 15-24Product description 1-07 to 1-08Pull-out for cleaning utensils 15-26Pull-out towel rail 2-09, 5-09Pull-outs / drawers 15-32, 15-33Q QUADRE The Kitchen Without Handles 17-01 to 17-77Product description 17-04, 17-05Summary of ranges 17-03Base units 17-11 to 17-29Wall units 17-33 to 17-46Tall units 17-49 to 17-77R Repair kit for surfaces 15-31Roller shutter dresser units and roller shutter niche units 10-03S Seating funiture 16-07Sensomatic 1-21Side coverings with double up frontsBase units System B and C 2-16, 5-16Wall units System B and C 3-21, 6-18Tall unit system B and C 4-32, 7-31Side covering panel with plinth 2-18, 4-33, 5-18, 7-32Shelf brackets 13-08Shelves for base units, tall units, wall units 15-23Shelves:Accessories 13-08Finishing 13-06, 13-07Shelves 13-05Solid wood 13-06Single fronts 15-31Sink units System B and C 2-11 to 2-13, 5-11 to 5-13Size changes for base, wall and tall units 12-03Slicer Multi-purpose 15-26Sliding door for corner tall unit 12-06Solid wood drawers and pull-outs 15-11, 15-34 to 15-36Size changes and variable front height arrangements 12-03Spice racks 15-25Stainless steel cover for bottom shelf 15-16Stainless steel frames 15-03Stainless steel sleeves 15-28, 16-05Step ladder 15-27Summary of carcase dimensions 1-02 to 1-06Supplementary equipment 1 + 2 12-11, 12-12Support legs 9-10, 15-28Surface care set 15-3106 6. IndexDesignation PageT Tables:BAX work table 16-05BAX gantry / standing tables 16-06BAX tables 16-03, 16-04Tall unit dressers, carcase 40 cm high 4-38, 7-37Tall units System B:Carcase height 137.2 cm 4-03 to 4-06Carcase height 162.2 cm 4-07 to 4-10Carcase height 203 cm 4-11 to 4-17Carcase height 215.5 cm 4-18 to 4-24Carcase height 228 cm 4-25 to 4-31Tall units System C:Carcase height 137.2 cm 7-03 to 7-06Carcase height 162.2 cm 7-07 to 7-10Carcase height 203 cm 7-11 to 7-16Carcase height 215.5 cm 7-17 to 7-23Carcase height 228 cm 7-24 to 7-30Tandem waste collection system 15-24Top open shelf design units 10-05Top units for appliance housings 4-37, 7-36Top units up to 145 cm high, wall unit depth 10-04, 10-05Top units:for appliances 4-37, 7-36for tall units, carcase 40 cm high 4-38, 7-37with folding doors 10-05Touch-Latch 1-21Towel rail 15-26Transom bars 15-30U Upright panels for base, wall and tall units 13-03V Vapors sheet real stainless steel 4-37, 7-36, 15-27Vario sliding door system 12-07Ventilation grille 14-05, 15-27Visible sides:Base unit System B and C 2-16, 5-16Wall unit system B and C 3-21, 6-18Tall unit system B and C 4-32, 7-31W Wall elements 11-09, 18-65Wall panels 13-11Wall shelves 13-10Wall units System B:Carcase height 49.5 cm 3-03 to 3-05Carcase height 62 cm 3-06 to 3-09Carcase height 74.5 cm 3-10 to 3-14Carcase height 87 cm 3-15 to 3-17Carcase height 99.5 cm 3-18 to 3-20Wall units System C:Carcase height 40 cm 6-03 to 6-04Carcase height 68 cm 6-05 to 6-09Carcase height 80.5 cm 6-10 to 6-13Carcase height 93 cm 6-14 to 6-17Waste collectors 15-14, 15-15Wickerwork baskets 15-22, 16-05Wire mesh shelves 15-24Wooden drawers 13-08Wooden glazing bars 15-30Worktops:Accessories 9-09Finishing 9-08, 9-09Variants 9-03, 9-04, 9-0507 7. KK-01Melamine, HPL and HPLD frontsPageCONSOFT Color K - 02CONSOFT Repro K - 03MULTICOLOR K - 04 and K - 05MULTICOLOR Luce K - 04 and K - 05MADERA K - 06MADERA Luce K - 06METALL K - 07UNITEC Solid HPLD K - 08SERRA Repro K - 09 8. CONSOFT ColorDirect lamination, surface mattInfoBoxValue group Accessories KP / KHHandles Section 1Visible sides Section 2 UB, 3 OB, 4 HB, 5 UC, 6 OC, 7 HCUpright panels and shelves 2 cm to 10 cm, Section 13Light pelmet Section 14Cornice Section 14Carcase Standard colours: carcase white, 1131 light grey, 1257 graphiteFurniture board carcase Beech veneer, solid wood front edge, colour selection Section 1++ 1 Polyurethane ++ 2 Polypropylene ++ 3 High-Pressure Laminate ++ 4 Polyvinyl acetate ++Ordering instructionsSpecial decors for front and carcase on requestCharged according to next higher PGK-02Range Price groupCONSOFT Color PP APP2 edge, 2 mmcolour-matched with the surfaceCONSOFT Color RU APP2 edge, 2 mmfreely selectable from all rangesCONSOFT Color ED APP2 edge, 2 mmstainless steel effectCONSOFT Color MP APP2 edge, 2 mmbeech multiplex effectCONSOFT Color Tio APP2 edge, 2 mm, 3D effect, 2-colour:026 HG white,1027 HG alpine white,1200 HG black,1358 HG magnoliaCONSOFT Color Tec AHPL3 laminate edge, 0.8 mmcolour-matched with the surfaceCONSOFT Color Tec 9510 A9610 AHPL3 laminate edge, 0.8 mm9510 aluminium decor9610 stainless steel decorCONSOFT Color CA 2Solid anodized aluminium edge, 1 mmaluminium effectCONSOFT Color CN 2Solid anodized aluminium edge, 1 mmstainless steel effectService featuresThe melamine resin coating stands for high resistance, easy care, enduringlightfastness, permanent easy cleaning and resistance to household chemicals. Thematerials used are compatible with foods and can be incinerated without harming theenvironment. These are decisive advantages as compared to thermoplastic PVC4films.The edge is glued with PU1 glue for a waterproof and heat-resistant bond.CONSOFT Color PP 1131 light grey handle 12/224 EDirectly laminated high-quality chipboard with plaindecors. Front and rear directly laminated with the samehigh-quality melamine resin.Thickness of front 19 mm,edge glued with PU1 glue.Choice of colours1026 1027white alpine white1303ivory white1365vanilla1573pastel yellow1358magnolia1331beige grey1316panna1193quartz brown1211basalt brown1115silver grey1184sand grey1131light grey1290anthracite1257graphite1200black 9. CONSOFT ReproDirect lamination, surface mattInfoBoxValue group Accessories KP / KHHandles Section 1Visible sides Section 2 UB, 3 OB, 4 HB, 5 UC, 6 OC, 7 HCUpright panels and shelves 2 cm to 10 cm, Section 13Light pelmet Section 14Cornice Section 14Carcase Standard colours: carcase white, 1131 light grey,1257 graphiteFurniture board carcase Beech veneer, solid wood front edge, colour selection Section 1++ 1 Polyurethane ++ 2 Polypropylene ++ 3 High-Pressure Laminate ++ 4 Polyvinyl acetate ++Ordering instructionsState whether horizontal or vertical grainBMA = Designation for continuous horizontal grainextending over several frontsMax. length: 2.65 mCharged according to next higher PGSpecial decors for front and carcase on requestK-03Range Price groupCONSOFT Repro PP APP2 edge, 2 mmCONSOFT Repro RU APP2 edge, 2 mmfreely selectablefrom all laminate rangesCONSOFT Repro ED APP2 edge, 2 mmstainless steel effectCONSOFT Repro MP APP2 edge, 2 mmbeech multiplex effectCONSOFT Repro Tec AHPL3 laminate edge, 0.8 mmCONSOFT Repro Tec 9510 A9610 AHPL3 laminate edge, 0.8 mm9510 aluminium decor9610 stainless steel decorCONSOFT Repro CA 2Solid anodized aluminium edge, 1 mmaluminium effectCONSOFT Repro CN 2Solid anodized aluminium edge, 1 mmstainless steel effectService featuresThe melamine resin coating stands for high resistance, easy care, enduringlightfastness, permanent easy cleaning and resistance to household chemicals. Thematerials used are compatible with foods and can be incinerated without harming theenvironment. These are decisive advantages as compared to thermoplastic PVC4films.The edges achieve maximum values in respect of lightfastness, resistance tochemicals and easy cleaning.The edge is glued with PU1 glue for a waterproof and heat-resistant bond.CONSOFT Repro PP 5605 Damson handle GM 15/224 EDirectly laminated high-quality chipboard withreproduction wood decor.Front and rear directly laminated with the same high-quality melamine resin.Thickness of front 19 mm, edge glued with PU1 glue.Horizontal and vertical grain patternplease see Info BoxChoice of decors6159Oak light5165Beechnatural5474Maple5243Sycamoremaple4894Walnut light0544Walnut dark5609Teak5673MakassarEbony5674Cherrywood5681CherrywoodHavanna5605Damson5690Weng 10. MULTICOLOR and MULTICOLOR Luce Front coloursHPL laminate matt and HPL laminate high gloss HGInfoBoxValue group Accessories KP / KH / KEHandles Section 1Visible sides Section 2 UB, 3 OB, 4 HB, 5 UC, 6 OC, 7 HCUpright panels and shelves 2 cm to 10 cm, Section 13Light pelmet Section 14Cornice Section 14Carcase Standard colours: carcase white, 1131 light grey, 1257 graphiteFurniture board carcase Beech veneer, solid wood front edge, colour selection Section 1++ 1 Polyurethane ++ 2 Polypropylene ++ 3 High-Pressure Laminate ++Ordering instructionsSpecial decors for front and carcase on requestCharged according to next higher PGK-04Choice of colours10261026 HGwhite10271027 HGalpine white11311131 HGlight grey13031303 HGivory white15731573 HGpastel yellow15741574 HGmaize yellow13651365 HGvanilla13311331 HGbeige grey13581358 HGmagnolia13161316 HGpanna13491349 HGcaramel11931193 HGquartz brown19801980 HGlava brown12111211 HGbasalt brown11841184 HGsand grey11151115 HGsilver grey12901290 HGanthracite12571257 HGgraphite12001200 HGblack17401740 HGice blue00270027 HGIndian red14011401 HGburgundyMULTICOLOR PP 1027 alpine white handle GM15/224 EHigh-quality chipboard 18 mm lined on both sideswith plain HPL3 decors.Thickness of front 19.6 mm matt, 20.4 mm high gloss,edging glued with PU1 glue.Service featuresHPL3 laminate stands for extremely high resistance, beit the resistance to abrasion, enduring lightfastness,permanent easy cleaning and resistance to householdchemicals.The edges achieve maximum values in respect oflightfastness, resistance to chemicals and easycleaning.The edge is glued with PU1 glue for a waterproof andheat-resistant bond. The materials used are compatiblewith foods and eco-friendly. 11. MULTICOLOR and MULTICOLOR Luce EdgesHPL laminate matt and HPL laminate high gloss HGK-05Range Price group Range Price groupMULTICOLOR PP 1HPL matt on both sidesMULTICOLOR Luce PP 1HPL HG on both sidesPP2 edging matt, 2 mmMULTICOLOR KE 3HPL matt on both sidesMULTICOLOR Luce KE 3HPL HG on both sidesSolid wood edging oiled, 1 mmSelection:TETRA and ALPHA veneers,Section FMULTICOLOR Luce GC 2HPL HG on both sidesChoice of colours:1026 HG white 1027 HG alpine white1358 HG magnolia 1303 HG ivory white1331 HG beige grey 1193 HG quartz brown1980 HG lava brown 1257 HG graphite1200 HG blackPP2 edging high gloss, 1.3 mmMULTICOLOR Tec 1HPL matt on both sidesMULTICOLOR Luce Tec 1HPL HG on both sidesHPL edging matt, 0.8 mmHPL edging high gloss, 1.2 mmMULTICOLOR ED 1HPL matt on both sidesMULTICOLOR Luce ED 1HPL HG on both sidesPP2 edging, 2 mmstainless steel effectMULTICOLOR Tec 9500 2HPL matt on both sidesMULTICOLOR Luce Tec 9500 2HPL HG on both sidesHPL edging, 0.8 mm9500 aluminium decor, smoothMULTICOLOR MP 1HPL matt on both sidesMULTICOLOR Luce MP 1HPL HG on both sidesPP2 edging, 2 mmbeech multiplex effectMULTICOLOR Tec 9610 2HPL matt on both sidesMULTICOLOR Luce Tec 9610 2HPL HG on both sidesHPL edging, 0.8 mm9610 stainless steel decorMULTICOLOR Tio 2HPL matt on both sidesMULTICOLOR Luce Tio 2HPL HG on both sidesChoice of colours:1026 HG white 1027 HG alpine white1200 HG black 1358 HG magnoliaPP2 edging, 2 mm3D effect, 2-colourMULTICOLOR CA 3HPL matt on both sidesMULTICOLOR Luce CA 3HPL HG on both sidesSolid anodized aluminium edging, 1 mmaluminium effectMULTICOLOR RU 1HPL matt on both sidesMULTICOLOR Luce RU 1HPL HG on both sidesPP2 edging matt, 2 mmfreely selectable fromall laminate rangesMULTICOLOR CN 3HPL matt on both sidesMULTICOLOR Luce CN 3HPL HG on both sidesSolid anodized aluminium edging, 1 mmstainless steel effect 12. MADERA and MADERA LuceHPL laminate matt and HPL laminate high gloss HGInfoBoxValue group Accessories KP / KHHandles Section 1Visible sides Section 2 UB, 3 OB, 4 HB, 5 UC, 6 OC, 7 HCUpright panels and shelves 2 cm to 10 cm, Section 13Light pelmet Section 14Cornice Section 14Carcase Standard colours: carcase white, 1131 light grey, 1257 graphiteFurniture board carcase Beech veneer, solid wood front edge, colour selection Section 1++ 1 Polyurethane ++ 2 Polypropylene ++ 3 High-Pressure Laminate ++Ordering instructionsState whether horizontal or vertical grainBMA = Designation for continuous horizontalgrain extending over several frontsMax. length: 2.65 mCharged according to next higher PGSpecial decors for front and carcase on requestK-06Range Price groupMADERA 2MADERA Luce PP 3PP2 edging, matt, 2 mmcolour-matched with the surfaceMADERA RU 2MADERA Luce RU 3PP2 edging, 2 mmfreely selectableMADERA ED 2MADERA Luce ED 3PP2 edging, 2 mmstainless steel effectMADERA MP 2MADERA Luce MP 3PP2 edging, 2 mmbeech multiplex effectMADERA TEC 2MADERA Luce Tec 3HPL3 high-gloss laminate edging, 1.2 mmcolour-matched with the surfaceMADERA Tec 9510 29610 2MADERA Luce Tec 9510 39610 3HPL3 laminate edging, 0.8 mm9510 aluminium decor9610 stainless steel dcorMADERA CA 4MADERA Luce CA 5Solid anodized aluminium edging, 1 mmaluminium effectMADERA CN 4MADERA Luce CN 5Solid anodized aluminium edging, 1 mmstainless steel effectService featuresHPL3 laminate stands for extremely high resistance, be it the resistance toabrasion, enduring lightfastness, permanent easy cleaning and resistance tohousehold chemicals.The edges achieve maximum values in respect of lightfastness, chemicalresistance and easy cleaning.The edge is glued with PU1 glue for a waterproof and heat-resistant bond. Thematerials used are compatible with foods and eco-friendly.MADERA Luce Tec 5674 Cherrywood Havanahandle GMCG 128Lined on both sides with 1.2 mm HPL3 laminate material.Thickness of front 20.4 mm, edging glued with PU1 glue.Horizontal and vertical grain patternplease see Info BoxChoice of decors MADERA Luce5165 HGBeech natur5474 HGMaple5243 HGSycamoreMaple5605 HGDamson5674 HGCherrywood5681 HGCherrywoodHavanna5615 HGIndian apple5673 HGMakassarEbony5690 HGWengChoice of decors MADERA4262Oak matured4447Walnutroman4263LancelotOak nature4264LancelotOak grey5615Indian apple 13. METALLHPL laminateInfoBoxValue group Accessories KP / KH / KEHandles Section 1Visible sides Section 2 UB, 3 OB, 4 HB, 5 UC, 6 OC, 7 HCUpright panels and shelves 2 cm to 10 cm, Section 13Light pelmet Section 14Cornice Section 14Carcase Standard colours: carcase white, 1131 light grey, 1257 graphiteFurniture board carcase Beech veneer, solid wood front edge, colour selection Section 1++ 1 Polyurethane ++ 2 High-Pressure Laminate ++Ordering instructionsK-07Range Price groupMETALL Tec 9500 4HPL 9500 smooth aluminium decor on both sidesHPL edge, 0.8 mm9500 aluminium decor, smoothMETALL KE 9500 4HPL 9500 smooth aluminium decor on both sidesSolid wood edge oiled, 1 mmSelection:TETRA and ALPHA veneers,Section FMETALL Tec 9610 4HPL 9610 stainless steel decor on both sidesHPL edge, 0.8 mm9610 stainless steel decorMETALL KE 9610 4HPL 9610 stainless steel decor on both sidesSolid wood edge oiled, 1 mmSelection:TETRA and ALPHA veneers,Section FMETALL CA 5HPL 9500 smooth alu decor on both sidesSolid anodized aluminium edge, 1 mmaluminium effectMETALL CN 5HPL 9610 stainless steel decor on both sidesSolid anodized aluminium edge, 1 mmstainless steel effectMETALL Tec 7478 3HPL 7478 sheet metal with reproductionsurface oxidation on both sidesHPL edge, 0.8 mm7478 sheet metal with reproduction surface oxidationMETALL KE 7478 3HPL 7478 sheet metal with reproductionsurface oxidation on both sidesSolid wood edge oiled, 1 mmSelection:TETRA and ALPHA veneers,Section FMETAL Tec 9500 smooth aluminium decor, handle LSLined on both sides with 0.8 mm HPL2 laminatematerial. Thickness of front 19.6 mm, edge glued withPU1 glue.Choice of colours9500aluminium decor,smooth9610stainless steeldecor7478sheet metal withrepro-ductionsurfaceoxidationService featuresHPL2 laminate stands for extremely high resistance,be it the resistance to abrasion, enduring lightfastness,permanent easy cleaning and resistance to householdchemicals.The edge is glued with PU1 glue for a waterproof andheat-resistant bond. The materials used are compatiblewith foods and eco-friendly. 14. UNITEC SolidHPLD laminate, dyed throughInfoBoxValue group Accessories KDHandles Section 1Visible sides Section 2 UB, 3 OB, 4 HB, 5 UC, 6 OC, 7 HCUpright panels and shelves 2 cm to 10 cm, Section 13Light pelmet Section 14Cornice Section 14Carcase Standard colours: carcase white, 1131 light grey, 1257 graphiteFurniture board carcase Beech veneer, solid wood front edge, colour selection Section 1++ 1 High-Pressure Laminate dyed through ++ 2 Polyurethane ++Ordering instructionsSpecial decors for front and carcase on requestCharged according to next higher PGK-08Range Price group Value groupUNITEC Solid 5HPLD edges, 1.2 mmcolour-matched with the surfaceKDService featuresHPLD1 laminate stands for extremely high resistance, be it resistance to abrasion,enduring lightfastness, permanent easy cleaning and resistance to householdchemicals. The edge is glued with PU2 glue for a waterproof and heat-resistant bond.UNITEC Solid 1026 D white handle GM15/224ELined on both sides with 1.2 mm HPLD1 dyed throughlaminate material.Thickness of front 20.4 mm, edges glued with PU2 glue.Choice of colours1026 Dwhite Solid1027 Dalpine white Solid1115 Dsilver greySolid1290 Danthracite Solid1184 Dsand grey Solid1193 Dquartz brownSolid1211 Dbasalt brown Solid1200 Dblack Solid 15. SERRA ReproDirect laminationInfoBoxValue group Accessories KPHandles Section 1Visible sides Section 2 UB, 3 OB, 4 HB, 5 UC, 6 OC, 7 HCUpright panels and shelves 2 cm to 10 cm, Section 13Light pelmet Section 14Cornice Section 14Carcase Standard colours: carcase white, 1131 light grey, 1257 graphiteFurniture board carcase Beech veneer, solid wood front edge, colour selection Section 1++ 1 Polyurethane ++ 2 Polypropylene ++Ordering instructionsSpecial decors for front and carcase on requestCharged according to next higher PGK-09Range Price groupSERRA Repro PP APP2 edge, 1 mmSERRA Repro CA 2Solid anodized aluminium edge, 1 mmaluminium effectSERRA Repro CN 2Solid anodized aluminium edge, 1 mmstainless steel effectService featuresThe melamine resin coating stands for high resistance, easy care, enduringlightfastness, permanent easy cleaning and resistance to household chemicals.The materials used are compatible with foods and can be incinerated withoutharming the environment.The edges achieve maximum values in respect of lightfastness, chemicalresistance and easy cleaning.The edge is glued with PU1 glue for a waterproof and heat-resistant bond.SERRA Repro PP 0008 marsh oak handle GMCG 128Directly laminated high-quality chipboard withreproduction wood decor.Front and rear directly laminated with the same high-quality melamine resin.Thickness of front 19 mm, edge glued with PU1 glue.Choice of decors0008 marsh oak0009 reed0012 crystal oak 16. FF-01Veneer frontsPageALPHA F - 02ALPHAKORD F - 03TETRA E F - 04TETRA E 1 F - 05TETRA P F - 06ARLON P F - 07 17. ALPHAVeneerInfoBoxValue group Accessories Wood group EHandles Section 1Visible sides Section 2 UB, 3 OB, 4 HB, 5 UC, 6 OC, 7 HCUpright panels and shelves 2 cm to 10 cm, Section 13Light pelmet Section 14Cornice Section 14Carcase Standard colours: carcase white, 1131 light grey, 1257 graphiteFurniture board carcase Beech veneer, solid wood front edge, colour selection Section 1++ 1 Polyurethane ++Ordering instructionsState whether horizontal or vertical grainBMA = Designation for continuous horizontalgrain extending over several frontsMax. length: 2.5 mCharged according to next higher PGSpecial veneers for front and carcase onrequestHigh-gloss lacquer finish on requestF-02Range Price group Wood groupALPHA 4Edges 1 mm veneerEALPHA CA 5Solid anodized aluminium edge,1 mmaluminium effectEALPHA CN 5Solid anodized aluminium edge,1 mmstainless steel effectEALPHA 9700 Teak handle GMCG 12/224Total thickness of the front 19 mm, high-qualitychipboard 18 mm with veneer. Veneer with horizontalor vertical grain pattern as specified. Veneer producedto order to ensure a uniform appearance. The surfaceis sealed with high-quality PUR1 matt silk lacquer. Edgeglued with PU1 glue.Continuous horizontalgrain pattern, BMA; see Info BoxChoice of veneers9700Teak4000Oak1670Makassar0371Black pine6601Weng1853grigio0149lava brown pine0560sand pineService featuresWood is a natural material.The fronts are produced to order. The matt silk PUR1 surface must be wipedwith a soft, damp cloth.The edge is glued with PU1 glue for a waterproof and heat-resistant bond. 18. ALPHAKORDVeneer on HPL laminateInfoBoxValue group Accessories Wood group EHandles Section 1Visible sides Section 2 UB, 3 OB, 4 HB, 5 UC, 6 OC, 7 HCUpright panels and shelves 2 cm to 10 cm, Section 13Light pelmet Section 14Cornice Section 14Carcase Standard colours: carcase white, 1131 light grey, 1257 graphiteFurniture board carcase Beech veneer, solid wood front edge, colour selection Section 1++ 1 High-Pressure Laminate ++ 2 Polyurethane ++Ordering instructionsState whether horizontal or vertical grainBMA = Designation for continuous horizontalgrain extending over several frontsMax. length: 2.5 mCharged according to next higher PGSpecial veneers for front and carcase onrequestF-03Range Price group Wood groupALPHAKORD 4Edges 1.2 mm veneer on HPLEALPHAKORD CA 5Solid anodized aluminium edge,1 mmaluminium effectEALPHAKORD CN 5Solid anodized aluminium edge,1 mmstainless steel effectEService featuresWood is a natural material.It owes its particular charm to natural changes in colour inside the veneer design.However, each front is unique due to being produced to order.The wood changes its colour in the course of time, due to exposure to natural light.The edge is glued with PU2 glue for a waterproof and heat-resistant bond.The surface must be wiped with a soft, damp cloth.ALPHAKORD 5069 light grey oak, handle GMCG 12/224High-quality chipboard 18 mm veneered with 1.2 mmthick HPL1 laminate lined with genuine wood.Total thickness of the front 20.4 mm, edge glued withPU2 glue. Veneer produced to order to ensure a uniformappearance. The surface is sealed with a high-qualitymelamine wax overlay.Choice of veneers5069light grey oak5065grey oak5066anthracite oak5067dark oak5057Makassar 19. TETRA wood group EVeneerInfoBoxValue group Accessories Wood group EHandles Section 1Visible sides Section 2 UB, 3 OB, 4 HB, 5 UC, 6 OC, 7 HCUpright panels and shelves 2 cm to 10 cm, Section 13Light pelmet Section 14Cornice Section 14Carcase Standard colours: carcase white, 1131 light grey, 1257 graphiteFurniture board carcase Beech veneer, solid wood front edge, colour selection Section 1++ 1 Polyurethane ++Ordering instructionsState whether horizontal or vertical grainBMA = Designation for continuous horizontalgrain extending over several frontsMax. length: 2.5 mPricing for BMA: next higher PGB_G_S_ = Designation for veneer with flower (B),planked veneer (G) or strip veneer (S)High-gloss lacquer finish on requestSpecial veneers for front and carcase on requestF-04Range Price group Wood groupTETRA 4 - 5Edges 1 mm veneerETETRA CA 4 - 5 + 10%Solid anodized aluminium edge,1 mmaluminium effectETETRA natural oak G_ handle GM 15/224 ETETRA CN 4 - 5 + 10%Solid anodized aluminium edge,1 mmstainless steel effectE Total thickness of the front 19 mm, high-qualitychipboard 18 mm with veneer. Veneer produced to orderto ensure a uniform appearance.Edges glued with PU1 glue. The surface is sealed withhigh-quality PUR1 matt silk lacquer or coloured hard oil.Choice of veneerBMA: Continuous horizontal grain pattern, see Info BoxB_G_S_: Veneer with flower (B), planked veneer (G), strip veneer (S), see Info BoxMaplePG 4IndicateB_G_S_BeechPG 4IndicateB_G_S_Oak naturalPG 4IndicateB_G_S_AshPG 4IndicateB_G_S_SprucePG 4IndicateB_G_S_ElmPG 4IndicateG_S_LarchPG 5IndicateB_G_S_Brushed darkbrown oakPG 5G_Oak graphitePG 5IndicateB_G_S_Coal oakoiledPG 5G_Stone oakoiledPG 5G_Havana oakoiledPG 5G_Coral ChalkoakPG 5G_Ocean greyoak oiledPG 5G_Castle brownoak oiledPG 5G_Cotton whiteoak oiledPG 5G_Service featuresWood is a natural material.Each front is unique, manufactured for a specific order and subject to natural fluctuations in colour.Wood changes its colour in the course of time, due to its exposure to natural light.The edge is glued with PU1 glue for a waterproof and heat-resistant bond.The surface must be wiped with a soft, damp cloth. 20. TETRA wood group E 1VeneerInfoBoxValue group Accessories Wood group E 1Handles Section 1Visible sides Section 2 UB, 3 OB, 4 HB, 5 UC, 6 OC, 7 HCUpright panels and shelves 2 cm to 10 cm, Section 13Light pelmet Section 14Cornice Section 14Carcase Standard colours: carcase white, 1131 light grey, 1257 graphiteFurniture board carcase Beech veneer, solid wood front edge, colour selection Section 1++ 1 Polyurethane ++Ordering instructionsState whether horizontal or vertical grainBMA = Designation for continuous horizontalgrain extending over several frontsMax. length: 2.5 mPricing for BMA: next higher PG or +20%B_G_S_ = Designation for veneer with flower (B),planked veneer (G) or strip veneer (S)High-gloss lacquer finish on requestSpecial veneers for front and carcase on requestF-05Range Price group Wood groupTETRA 5 - 7Edges 1 mm veneerE 1TETRA CA 5 - 7 + 10%Solid anodized aluminium edge,1 mmaluminium effectE 1TETRA Weng G_ handle GMCG 12/224TETRA CN 5 - 7 + 10%Solid anodized aluminium edge,1 mmstainless steel effectE 1 Total thickness of the front 19 mm, high-qualitychipboard 18 mm with veneer.Veneer produced to order to ensure a uniformappearance.The edge is glued with PU1 glue. The surface is sealedwith high-quality PUR1 matt silk lacquer.Choice of veneerBMA: Continuous horizontal grain pattern, see Info BoxB_G_S Veneer with flower (B), planked veneer (G), strip veneer (S), see Info BoxCherrywoodPG 5IndicateB_G_S_Oregon PinePG 5G_NutwoodPG 5IndicateB_G_S_RobiniaPG 5IndicateB_G_MahoganyPG 5IndicateB_G_S_Wild oakPG 6-------SenPG 7B_SwisspearwoodPG 7B_TeakPG 7G_DamsonPG 7G_Indian applePG 7G_WengPG 7IndicateB_G_MacassarPG 7IndicateB_G_S_RosewoodPG 7B_White ebonyPG 7+50%B_Service featuresWood is a natural material.Each front is unique, manufactured for a specific order and subject to natural fluctuations in colour.Wood changes its colour in the course of time, due to its exposure to natural light.The edge is glued with PU1 glue for a waterproof and heat-resistant bond.The surface must be wiped with a soft, damp cloth. 21. TETRA PVeneerInfoBoxValue group Accessories Wood group EHandles Section 1Visible sides Section 2 UB, 3 OB, 4 HB, 5 UC, 6 OC, 7 HCUpright panels and shelves 2 cm to 10 cm, Section 13Light pelmet Section 14Cornice Section 14Carcase Standard colours: carcase white, 1131 light grey, 1257 graphiteFurniture board carcase Beech veneer, solid wood front edge, colour selection Section 1++ 1 Polyurethane ++Ordering instructionsSpecial colours on requestCharged according to next higher PGF-06Range Price group Wood groupTETRA P 73 5 - 6Edges 1 mm veneerTETRA P 100 5 - 6Edges 1 mm veneerTETRA P 120 5 - 6Edges 1 mm veneerTETRA P 150 5 - 6Edges 1 mm veneerEEEETETRA P 73 magma red lava grey, knob K 35 ZOMDF board 18 mm thick, veneered. Total thickness ofthe front 19 mm.Veneer produced to order in panel effect to ensure auniform appearance.Profile: spacing between grooves 7.3 cm, 10 cm, 12 cmand 15 cm. The edge is glued with PU1 glue. The surfaceis sealed with high-quality PUR1 coloured matt silklacquer.Choice of coloursreed greenPG 5sand yellowPG 5cappuccinoPG 5fjord bluePG 5cream whitePG 5pure whiteRAL 9010PG 5quartz brownPG 5sand greyPG 5basalt brownPG 5beige greyPG 5light greyPG 5magma redlava greyPG 6Service featuresWood is a natural material.Each front is unique, manufactured for a specific order and subject to natural fluctuationsin colour.Wood changes its colour in the course of time, due to its exposure to natural light.The edge is glued with PU1 glue for a waterproof and heat-resistant bond.The surface must be wiped with a soft, damp cloth. 22. ARLON PVeneer knotty oakInfoBoxValue group Accessories Wood group E 1Handles Section 1Visible sides Section 2 UB, 3 OB, 4 HB, 5 UC, 6 OC, 7 HCUpright panels and shelves 2 cm to 10 cm, Section 13Light pelmet Section 14Cornice Section 14Carcase Standard colours: carcase white, 1131 light grey, 1257 graphiteFurniture board carcase Beech veneer, solid wood front edge, colour selection Section 1++ 1 Polyurethane ++Ordering instructionsState whether horizontal or vertical grainSpecial colours on requestCharged according to next higher PGF-07Range Price group Wood groupARLON P 5Edges 1 mm veneerE 1ARLON P Coal knob KC 50 EHigh-quality chipboard 18 mm with coarse knotty oakveneer. Total thickness of the front 19 mm. Veneerproduced to order in panel effect to ensure a uniformappearance. Profile: spacing between grooves 12 cm.The edges are glued with PU1 glue. The surface issealed with high-quality PUR1 matt silk lacquer orcoloured hard oil.Choice of coloursNaturaloiledCoaloiledStoneoiledHavanaoiledCoral chalk Ocean greyoiledCastle brownoiledCotton whiteoiledService featuresWood is a natural material.Each front is unique, manufactured for a specific order and subject to natural fluctuationsin colour due above all to its knotty nature.The wood changes its colour in the course of time, due to exposure to natural light.The edge is glued with PU1 glue for a waterproof and heat-resistant bond.The surface must be wiped with a soft, damp cloth. 23. LL - 01Lacquered frontsPageVILLA L - 02CASTELL L - 03CORNWALL L - 04STUDIO L - 05VILLAGE L - 06CULIBRA L - 07 24. VILLALacquerInfoBoxValue group Accessories Lacquer group LHandles Section 1Visible sides Section 2 UB, 3 OB, 4 HB, 5 UC, 6 OC, 7 HCUpright panels and shelves 2 cm to 10 cm, Section 13Light pelmet Section 14Cornice Section 14Carcase Standard colours: carcase white, 1131 light grey, 1257 graphiteFurniture board carcase Beech veneer, solid wood front edge, colour selection Section 1++ 1 Polyurethane ++Ordering instructionsSpecial colour for front and carcase on requestCharged according to next higher PGL-02Range Price group Lacquer groupVILLA L 3PUR1 matt silk lacquerLVILLA SL 3Structure finish,PUR1 matt silk lacquerwith texturing pigmentsLVILLA L light grey 1131 knob K 35 RSolid wood framed front with MDF centre panel, 2 mmradius outside. Width of frame 55 mm, drawer frontwithout frame and centre panel. The surface is sealedwith high-quality PUR1 matt silk lacquer.Choice of colourspure whiteRAL 9010ivory white vanillamagnolia light grey beige greyquartz brownService featuresThe front is designed in accordance with the specific properties of thematerials used in order to guarantee a long service life. The lacqueredsurface is easy to care for and resistant to household chemicals.The surface must be wiped with a soft, damp cloth. 25. CASTELL CASTELL sluredLacquer LacquerInfoBoxValue group Accessories Lacquer group LHandles Section 1Visible sides Section 2 UB, 3 OB, 4 HB, 5 UC, 6 OC, 7 HCUpright panels and shelves 2 cm to 10 cm, Section 13Light pelmet Section 14Cornice Section 14Carcase Standard colours: carcase white, 1131 light grey, 1257 graphiteFurniture board carcase Beech veneer, solid wood front edge, colour selection Section 1++ 1 Polyurethane ++Ordering instructionsSpecial colour for front and carcase on requestCharged according to next higher PGL-03Range Price group Lacquer groupCASTELL 4 LCASTELL slured 5Like CASTELL,but structure finish:PUR1 matt silk lacquerwith texturing pigmentsLChoice of colours for CASTELL and CASTELL sluredService featuresThe front is designed in accordance with the specific propertiesof the materials used in order to guarantee a long service life.The surface must be wiped with a soft, damp cloth.pure whiteRAL 9010ivory white vanilla magnolia light grey beige grey quartz brownCASTELL ivory white 1303 knob K 35 ZRSolid wood framed front with MDF centre panel. Width offrame 55 mm, chamfered on the outside. Drawer frontwithout frame and centre panel. The surface is sealedwith high-quality PUR1 matt silk lacquer. 26. CORNWALLLacquerInfoBoxValue group Accessories Lacquer group LHandles Section 1Visible sides Section 2 UB, 3 OB, 4 HB, 5 UC, 6 OC, 7 HCUpright panels and shelves 2 cm to 10 cm, Section 13Light pelmet Section 14Cornice Section 14Carcase Standard colours: carcase white, 1131 light grey, 1257 graphiteFurniture board carcase Beech veneer, solid wood front edge, colour selection Section 1++ 1 Polyurethane ++Ordering instructionsSpecial colours on requestCharged according to next higher PGL-04Range Price group Lacquer groupCORNWALL P 73 4CORNWALL P 100 4CORNWALL P 120 4CORNWALL P 150 4LLLLService featuresThe lacquered surface is easy to care for and resistantto household chemicals.The surface must be wiped with a soft, damp cloth.CORNWALL P 73 cream white-terra brown knob K 33 ZMDF board 19 mm, lacquered. Profile: Distancebetween grooves 7.3 cm, 10 cm, 12 cm and 15 cm.The surface is sealed with a high-quality PUR1 colouredmatt silk lacquer.Choice of colourscream white-terra brown pure white-lava greymagma red-lava grey basalt brown 27. STUDIOLacquerInfoBoxValue group Accessories Lacquer group L / L 1Handles Section 1Visible sides Section 2 UB, 3 OB, 4 HB, 5 UC, 6 OC, 7 HCUpright panels and shelves 2 cm to 10 cm, Section 13Light pelmet Section 14Cornice Section 14Carcase Standard colours: carcase white, 1131 light grey, 1257 graphiteFurniture board carcase Beech veneer, solid wood front edge, colour selection Section 1Ordering instructionsSpecial colour for front and carcase on requestCharged according to next higher PGL-05Range Price group Lacquer groupSTUDIO L 3Polyurethane matt silk lacquerLSTUDIO SL 3Polyurethane matt silk lacquerwith texturing pigmentsLSTUDIO SG 4Polyurethane high gloss silk lacquerL 1STUDIO HG 5Polyurethane / acrylic lacquer, high glossL 1STUDIO HG 1401 burgundy handle GM 12/160MDF board 19 mm, lacquered.Total thickness of the front 20 mm.2 mm outside radius.Choice of colourspure whiteRAL 9010alpine white ivory whitelight grey beige grey burgundyquartz brown lava brown blackService featuresThe lacquered surface is easy to care for and resistantto household chemicals.The surface must be wiped with a soft, damp cloth. 28. VILLAGELacquerInfoBoxValue group Accessories Lacquer group L / L 1Handles Section 1Visible sides Section 2 UB, 3 OB, 4 HB, 5 UC, 6 OC, 7 HCUpright panels and shelves 2 cm to 10 cm, Section 13Light pelmet Section 14Cornice Section 14Carcase Standard colours: carcase white, 1131 light grey, 1257 graphiteFurniture board carcase Beech veneer, solid wood front edge, colour selection Section 1Ordering instructionsSpecial colour for front and carcase on requestCharged according to next higher PG or + 5%L-06Range Price group Lacquer groupVILLAGE L 6Polyurethane matt silk lacquerLVILLAGE SL 6Polyurethane matt silk lacquerwith texturing pigmentsLVILLAGE SG 7 + 10%Polyurethane high gloss silk lacquerL 1VILLAGE HG 7 + 25%Polyurethane / acrylic lacquer, high glossL 1VILLAGE SL light grey knob K 135 EMDF board as framed front, milled. Chamfered outside.Total thickness of the front 20 mm, width of frame55 mm; drawer front without frame and centre panel.Choice of colourspure whiteRAL 9010alpine white ivory whitelight grey beige grey magnoliaquartz brown lava brown blackService featuresThe front is designed in accordance with the specific properties of the materials used inorder to guarantee a long service life. The lacquered surface is easy to care for andresistant to household chemicals.The surface must be wiped with a soft, damp cloth. 29. CULIBRALacquerInfoBoxValue group Accessories Lacquer group LHandles Section 1Visible sides Section 2 UB, 3 OB, 4 HB, 5 UC, 6 OC, 7 HCUpright panels and shelves 2 cm to 10 cm, Section 13Light pelmet Section 14Cornice Section 14Carcase Standard colours: carcase white, 1131 light grey, 1257 graphiteFurniture board carcase Beech veneer, solid wood front edge, colour selection Section 1++ 1 Polyurethane ++Ordering instructionsSpecial colour for front and carcase on requestCharged according to next higher PGL-07Range Price group Lacquer groupCULIBRA 6 LService featuresThe front is designed in accordance with the specific properties of the materials usedin order to guarantee a long service life. The lacquered surface is easy to care for andresistant to household chemicals.The surface must be wiped with a soft, damp cloth.CULIBRA panna knob K 25 ZOTotal thickness of the front 28 mm,width of frame 30 mm, profiled.Centre panel 8 mm MDF board.The surface is sealed with high-qualityPUR1 coloured matt silk lacquer.Choice of colourspure whiteRAL 9010alpine white ivory whitemagnolia light grey beige greypanna quartz brown lava brown 30. GG-01Design frontsPageART Steel G - 02ART Alu G - 02MORA G - 03VENTANA G - 04VENTURA G - 05VENTURA Rahmen G - 06 31. ART Steel ART AluPartical board covered with 1 mm real stainless steel Partical board coated with 1 mm solid aluInfoBoxValue group Accessories on requestHandles Section 1Visible sides not possible, but can be used as double up frontSection 2 UB, 3 OB, 4 HB, 5 UC, 6 OC, 7 HCUpright panels and shelves on requestLight pelmet Section 14Cornice Section 14Carcase Standard colours: carcase white, 1131 light grey, 1257 graphiteFurniture board carcase Beech veneer, solid wood front edge, colour selection Section 1++ 1 Polyurethane ++Ordering instructionsART SteelThe 15% surcharge also applies for alladditional parts which are encased with1 mm stainless steel.G-02Range Price groupART Steel 7 + 15%Care instructionsDo not use any aggressive or abrasive cleaning agents or polishes.We recommend that you use a silicone-based special care agent.ART Steel bar handle STG 15 ETotal thickness of the front 20 mm;directly laminated 19 mm melamine resin board assupport panel.Outer surface and edges encased with 1 mm realstainless steel. Radius 2 mm, corners welded. Realstainless steel brushed vertically.Interior colour to match the standard carcase: Carcasewhite, 1131 light grey or 1257 graphite.Range Price groupART Alu 71 mm solid anodized aluminiumon both sidesSolid anodized aluminium edge,1 mm, same as the surfaceART Alu handle LSTotal thickness of the front 21 mm;directly laminated 19 mm melamine resin board assupport panel.Edges and both sides coated with 1 mm anodized,unbrushed aluminium.The surface and edges are glued with PU1 glue for awaterproof and totally heat-resistant bond. 32. MORALacquered design frontInfoBoxValue group Accessories Lacquer group LHandles Section 1Visible sides Section 2 UB, 3 OB, 4 HB, 5 UC, 6 OC, 7 HCUpright panels and shelves 2 cm to 10 cm, Section 13Light pelmet Section 14Cornice Section 14Carcase Standard colours: carcase white, 1131 light grey, 1257 graphiteFurniture board carcase Beech veneer, solid wood front edge, colour selection Section 1Ordering instructionsSpecial colour for front and carcase on requestCharged according to next higher PGG-03Range Price group Lacquer groupMORA 5 LService featuresThe front is designed in accordance with the specific propertiesof the materials used in order to guarantee a long service life.The surface must be wiped with a soft, damp cloth.MORA pure white RAL 9010Total thickness of the front 20 mm,width of frame 200 mm at the sides, 150 mm at top andbottom; 2 mm outside radius. Centre panel 8 mm MDFboard. The surface is sealed with high-quality PUR1coloured matt silk lacquer.Choice of colourspure whiteRAL 9010alpine white ivory whitemagnolia light grey beige greypanna quartz brown lava brown 33. VENTANAFramed glass frontInfoBoxValue group Accessories freely selectableHandles Section 1Visible sides can be used as overlaid front panelUpright panels and shelves 2 cm to 10 cm, Section 13Light pelmet Section 14Cornice Section 14Carcase Standard colours: carcase white, 1131 light grey, 1257 graphiteFurniture board carcase Beech veneer, solid wood front edge, colour selection Section 1Ordering instructionsThe handles GMU, VGMU, LS, GWL, GW 90 Eand GMR 32 cannot be used for structuralreasons.G-04Range Price groupVENTANA 7 + 25%Service featuresMust be cleaned with conventional glass cleaning agent.VENTANAAluminium framed glass front.Total thickness of the front 20 mm, width of frame 50 mm,mitred corners. Glass pane printed with greypassepartout in same width as frame on inside. 34. VENTURAGlass frontInfoBoxValue group Accessories freely selectableHandles Section 1Visible sides can be used as overlaid front panelUpright panels and shelves 2 cm to 10 cm, Section 13Light pelmet Section 14Cornice Section 14Carcase Standard colours: carcase white, 1131 light grey, 1257 graphiteFurniture board carcase Beech veneer, solid wood front edge, colour selection Section 1Ordering instructionsRAL, Sikkens and NCS colours are possibleCharged according to next higher PGThe handles GMU, GW 90 E and GMR 32cannot be used for structural reasons.G-05Range Price groupVENTURA 5Service featuresClean with conventional glass cleaning agent.VENTURA blackPartical board with 4 mm bonded, coloured toughenedsafety glass pane.Total thickness of the front 19.6 mm.Choice of colourstraffic whiteRAL 9016similar to 1026ivory whitemagnolia black 35. VENTURA FrameFramed glass frontInfoBoxValue group Accessories freely selectableHandles Section 1Visible sides can be used as overlaid front panelUpright panels and shelves 2 cm to 10 cm, Section 13Light pelmet Section 14Cornice Section 14Carcase Standard colours: carcase white, 1131 light grey, 1257 graphiteFurniture board carcase Beech veneer, solid wood front edge, colour selection Section 1Ordering instructionsRAL, Sikkens and NCS colours are possibleCharged according to next higher PGThe handles GMU, GW 90 E and GMR 32cannot be used for structural reasons.G-06Range Price groupVENTURA Frame 5Service featuresClean with conventional glass cleaning agent.VENTURA FRAME blackSupport panel as frame with 4 mm bonded, colouredtoughened safety glass pane. Glass pane lacquered withpassepartout in same width as frame on inside.Total thickness of the front 19.6 mm.Choice of colours for frametraffic whiteRAL 9016similar to 1026ivory whitemagnolia black 36. MM - 01Multi-layer real wood frontsPageFRANKA M - 02FRANKA P M - 03FRANKA TH M - 04FRANKA TH P M - 05 37. FRANKASolid wood 3 or 5 layersInfoBoxValue group Accessories Wood group E / E 1Handles Section 1Visible sides Section 2 UB, 3 OB, 4 HB, 5 UC, 6 OC, 7 HCUpright panels and shelves 2 cm to 10 cm, Section 13Light pelmet Section 14Cornice Section 14Carcase Standard colours: carcase white, 1131 light grey, 1257 graphiteFurniture board carcase Beech veneer, solid wood front edge, colour selection Section 1++ 1 Polyurethane ++Ordering instructionsSpecial colour for FRANKA Oak andFranka Wild oak on requestCharged according to next higher PGor + 5%M-02Range Price group Wood groupFRANKA Maple 6 EFRANKA Birch 6 EFRANKA Beech 6 EFRANKA Spruce 6 EFRANKA Oak 6FRANKA Wild oak 6EE 1FRANKA Cherrywood 7 + 15% E 1FRANKA Larch 7 E 1FRANKA Nutwood 7 E 1FRANKA Robinia 7 + 5% E 1FRANKA Teak 7 + 15% E 1FRANKA Nutwood handle 15/224 ETotal thickness 21 mm.Glued 3 or 5 layers solid wood, edge with 2 mm radius.The surface is finished with high quality PUR1 matt silklacquer, waxed or oiled.Choice of colours, FRANKA Oakbrushedwaxedclear greybrushedwaxedsea greybrushedwaxed greyStone oiled Havana oiled Ocean grey oiledCotton white oiled Castle brown oiled Coal oiledCoral chalk light natural oak Limed oakFRANKA Wild oak, colours on requestWild oakService featuresWood is a natural material.Each front is unique, manufactured for a specific order and subject tonatural fluctuations in colour.Wood changes its colour in the course of time, due to its exposure to natural light.The surface must be wiped with a soft, damp cloth. 38. FRANKA PSolid wood 3 or 5 layersInfoBoxValue group Accessories Wood group E / E 1Handles Section 1Visible sides Section 2 UB, 3 OB, 4 HB, 5 UC, 6 OC, 7 HCUpright panels and shelves 2 cm to 10 cm, Section 13Light pelmet Section 14Cornice Section 14Carcase Standard colours: carcase white, 1131 light grey, 1257 graphiteFurniture board carcase Beech veneer, solid wood front edge, colour selection Section 1Ordering instructionsIndicate required distance between grooves73, 100, 120 or 150 mmSpecial colour for FRANKA oak andFranka wild oak on requestCharged according to next higher PG or + 5%M-03Range Price group Wood groupFRANKA P Maple 6 + 5% EFRANKA P Birch 6 + 5% EFRANKA P Beech 6 + 5% EFRANKA P Spruce 6 + 5% EFRANKA P Oak 6 + 5%FRANKA P Wild oak 6 + 5%EE 1FRANKA P Cherrywod 7 + 20% E 1FRANKA P Larch 7 + 5% E 1FRANKA P Nutwood 7 + 5% E 1FRANKA P Robinia 7 + 10% E 1FRANKA P Teak 7 + 20% E 1FRANKA P 73 teak knob K 35 ZRTotal thickness 21 mm.Glued 3 or 5 layers solid wood with panel effect, edgingwith 2 mm radius. Profile: Distance between grooves7.3 cm, 10 cm, 12 cm and 15 cm. Surface matt silklacquered, waxed or oiled.Choice of colours, FRANKA P Oakbrushedwaxedclear greybrushedwaxedsea greybrushedwaxed greyStone oiled Havana oiled Ocean grey oiledCotton white oiled Castle brown oiled Coal oiledCoral chalk Light natural oak Limed oakFRANKA Wild oak, colours on requestWild oakService featuresWood is a natural material.Each front is unique, manufactured for a specific order and subject to naturalfluctuations in colour.Wood changes its colour in the course of time, due to its exposure to natural light.The surface must be wiped with a soft, damp cloth. 39. FRANKA THSolid wood 3 or 5 layersInfoBoxValue group Accessories Wood group E / E 1Handles Section 1Visible sides Section 2 UB, 3 OB, 4 HB, 5 UC, 6 OC, 7 HCUpright panels and shelves 2 cm to 10 cm, Section 13Light pelmet Section 14Cornice Section 14Carcase Standard colours: carcase white, 1131 light grey, 1257 graphiteFurniture board carcase Beech veneer, solid wood front edge, colour selection Section 1Ordering instructionsM-04Range Price group Wood groupFRANKA TH Maple 6 + 5% EFRANKA TH Oak 6 + 5% EFRANKA TH Robinia 7 + 5% E 1TH: Thermo-wood, i.e. wood preserved without chemicalsHeat-treated wood only absorbs half as much moisture as fresh wood.This offers the following advantages:- Less shrinkage and swelling, up to 90% dependingon the type of wood and degree of treatment- High dimensional stability- Less internal tension in the wood- Reduced moisture content equilibrium: in the same climaticconditions, heat-treated wood will only absorb half as muchwater as normally seasoned wood- Homogeneous colour changes throughout the entire cross-section, i.e. the heat treatment extends into the middle of thewood, thus ensuring constant colouring even after beingprocessed, for instance by cutting and profiling- Any resin evaporates during the heat treatment process- Heat-treated wood has short fibres and does not form splinterswhen protected from strong UV light- Long service life, durability class 1- Thermo-wood is a healthy natural material made from nativeregrowing wood which is more resistant than untreatedwood, even without chemical treatmentFRANKA TH Oak handle GMCG 12/224Total thickness 21 mm.Glued 3 or 5 layres solid wood, edges with 2 mm radius.Oiled finish.Service featuresWood is a natural material.Each front is unique, manufactured for a specific order and subject tonatural fluctuations in colour.Wood changes its colour in the course of time, due to its exposure tonatural light.The surface must be wiped with a soft, damp cloth. 40. FRANKA TH PSolid wood 3 or 5 layersInfoBoxValue group Accessories Wood group E / E 1Handles Section 1Visible sides Section 2 UB, 3 OB, 4 HB, 5 UC, 6 OC, 7 HCUpright panels and shelves 2 cm to 10 cm, Section 13Light pelmet Section 14Cornice Section 14Carcase Standard colours: carcase white, 1131 light grey, 1257 graphiteFurniture board carcase Beech veneer, solid wood front edge, colour selection Section 1Ordering instructionsIndicate required distance between grooves73, 100, 120 or 150 mmM-05Range Price group Wood groupFRANKA TH P maple 6 + 10% EFRANKA TH P oak 6 + 10% EFRANKA TH P robinia 7 + 10% E 1TH: Thermo-wood, i.e. wood preserved without chemicalsHeat-treated wood only absorbs half as much moisture as fresh wood.This offers the following advantages:- Less shrinkage and swelling, up to 90% dependingon the type of wood and degree of treatment- High dimensional stability- Less internal tension in the wood- Reduced moisture content equilibrium: in the same climaticconditions, heat-treated wood will only absorb half as muchwater as normally seasoned wood- Homogeneous colour changes throughout the entire cross-section, i.e. the heat treatment extends into the middle of thewood, thus ensuring constant colouring even after beingprocessed, for instance by cutting and profiling- Any resin evaporates during the heat treatment process- Heat-treated wood has short fibres and does not form splinterswhen protected from strong UV light- Long service life, durability class 1- Thermo-wood is a healthy natural material made from nativeregrowing wood which is more resistant than untreatedwood, even without chemical treatmentFRANKA TH P 73 Robinia knob K 35 ZOTotal thickness 21 mm,glued 3 or 5 layers solid wood with panel effect. Edgeswith 2 mm radius. Profile: Distance between grooves7.3 cm, 10 cm, 12 cm and 15 cm. Oiled finish.Service featuresWood is a natural material.Each front is unique, manufactured for a specific order and subject tonatural fluctuations in colour.Wood changes its colour in the course of time, due to its exposure tonatural light.The surface must be wiped with a soft, damp cloth. 41. RR-01Wood framed frontsPageLUCCA R - 02CASA R - 03BRABANT R - 04GELDERLAND R - 05TOSCANA R - 06TOSCANA Paneel R - 06ARAGON / ARAGON N R - 07ARLES R - 08BAVARIA R - 09FRISIA R - 10FRAM R - 11TREVISO R - 12VIRTON R - 13VIRTON K R - 13 42. LUCCAWood framed frontInfoBoxValue group Accessories Wood group E / E 1Handles Section 1Visible sides Section 2 UB, 3 OB, 4 HB, 5 UC, 6 OC, 7 HCUpright panels and shelves 2 cm to 10 cm, Section 13Light pelmet Section 14Cornice Section 14Carcase Standard colours: carcase white, 1131 light grey, 1257 graphiteFurniture board carcase Beech veneer, solid wood front edge, colour selection Section 1++ 1 Polyurethane ++Ordering instructionsSpecial colour for front and carcase on requestCharged according to next higher PGR-02Range Price group Wood groupLUCCA Maple 5 ELUCCA Beech 5 ELUCCA Cherrywood 6amber-colouredE 1LUCCA Cherrywood 6ruby-colouredE 1LUCCA Cherrywood amber-coloured knob K 125 ESolid wood framed front with veneer centre panel.Width of frame 50 mm, drawer front without frame andcentre panel.Surface sealed with high quality PUR1 matt silk lacquer.Maple BeechCherrywoodamber-colouredCherrywoodruby-colouredService featuresThe front is designed in accordance with the specificproperties of the materials used in order to guarantee along service life.The surface must be wiped with a soft, damp cloth. 43. CASAWood framed frontInfoBoxValue group Accessories Wood group E / E 1Handles Section 1Visible sides Section 2 UB, 3 OB, 4 HB, 5 UC, 6 OC, 7 HCUpright panels and shelves 2 cm to 10 cm, Section 13Light pelmet Section 14Cornice Section 14Carcase Standard colours: carcase white, 1131 light grey, 1257 graphiteFurniture board carcase Beech veneer, solid wood front edge, colour selection Section 1++ 1 Polyurethane ++Ordering instructionsCASA:Special colour for front and carcase on requestCharge + 5%CASA Cherrywood, Beech and Oak:Special colour for front and carcase on requestCharged according to next higher PG or + 5%R-03Range Price group Wood groupCASA 7 E 1CASA Cherrywood 7 E 1CASA Beech 5 ECASA Oak 5 EChoice of colours CASAantique white yellow green red blueCASA Cherrywood CASA Beech CASA OakantiquePG 7dark rubyPG 7antique mellowedPG 7 + 5%dark ruby mellowedPG 7 + 5%naturalPG 5naturalPG 5CASA antique white knob K 33 MSolid wood framed front with veneer centre panel,emphasizes hand-crafted. Width of frame 55 mm,drawer front without frame and centre panel. Surfacefinished with two-tone stain technique with patina,abrasion effect and sealed with high quality PUR1 mattsilk lacquer. The texture of the wood remains visiblewith this finish.The combination of overlapping colours and a specialsanding technique gives this front its Mediterranean flairas well as high service value.Service featuresThe front is designed in accordance with the specificproperties of the wood to guarantee a long service life.The surface must be wiped with a soft, damp cloth. 44. BRABANTWood framed frontInfoBoxValue group Accessories Wood group EHandles Section 1Visible sides Section 2 UB, 3 OB, 4 HB, 5 UC, 6 OC, 7 HCUpright panels and shelves 2 cm to 10 cm, Section 13Light pelmet Section 14Cornice Section 14Carcase Standard colours: carcase white, 1131 light grey, 1257 graphiteFurniture board carcase Beech veneer, solid wood front edge, colour selection Section 1++ 1 Polyurethane ++Ordering instructionsSpecial colour for front and carcase onrequestCharged according to next higher PGR-04Range Price group Wood groupBRABANT 6light natural, brushed lightlyEBRABANT 6antique whiteEService featuresThe front is designed in accordance with the specific properties of the woodto guarantee a long service life. The solid wood front is made from carefullyselected oak.This wood front owes its high service value to the combination of a lightlybrushed wood surface and high-quality UR1 lacquer.The surface must be wiped with a soft, damp cloth.BRABANT natural light, brushed lightly,handle GMCG 12/224Brabant antique white handle GMCG 12/224Total thickness of the front 22 mm.Solid oak framed front with veneer centre panel.Width of frame 77 mm, drawer front without frame and centrepanel.The surface is sealed with high quality PUR1 matt silklacquer. 45. GELDERLANDWood framed frontInfoBoxValue group Accessories Wood group EHandles Section 1Visible sides Section 2 UB, 3 OB, 4 HB, 5 UC, 6 OC, 7 HCUpright panels and shelves 2 cm to 10 cm, Section 13Light pelmet Section 14Cornice Section 14Carcase Standard colours: carcase white, 1131 light grey, 1257 graphiteFurniture board carcase Beech veneer, solid wood front edge, colour selection Section 1++ 1 Polyurethane ++Ordering instructionsSpecial colour for front and carcase on requestCharged according to next higher PGR-05Range Price group Wood groupGELDERLAND 6 EService featuresThis wood front owes its high service value to the combination of a lightlybrushed wood surface and high-quality PUR1 coloured matt silk lacquer.The surface must be wiped with a soft, damp cloth.GELDERLAND sand yellow knob K 35 ZOSolid wood framed front with veneer centre panel.Width of frame 80 mm, drawer front without frame andcentre panel. Surface sealed with high-quality PUR1coloured matt silk lacquer.Choice of colourspure whiteRAL 9010cream white cappuccinosand yellow reed green fjord blue 46. TOSCANA TOSCANA PanelWood framed front Wood framed front with profiled centre panelInfoBoxValue group Accessories Wood group EHandles Section 1Visible sides Section 2 UB, 3 OB, 4 HB, 5 UC, 6 OC, 7 HCUpright panels and shelves 2 cm to 10 cm, Section 13Light pelmet Section 14Cornice Section 14Carcase Standard colours: carcase white, 1131 light grey, 1257 graphiteFurniture board carcase Beech veneer, solid wood front edge, colour selection Section 1++ 1 Polyurethane ++Ordering instructionsSpecial colour for front and carcase on requestCharged according to next higher PGR-06Range Price group Wood groupTOSCANA 6 ETOSCANA antique white, brown patina, knob K 35 ZO LSolid spruce framed front with veneer centre panel andglued-in ornamental profile. Cross-rail 60 mm wide,vertical rail 80 mm wide.Profiled solid wood drawer front without frame and centrepanel.The surface is sealed with high quality PUR1 matt silklacquer.Range Price group Wood groupTOSCANA P 6 + 5% ETOSCANA P antique white, brown patina, knob K 35 ZO LSolid spruce framed front with veneer centre panelprofiled in panel effect and glued-in ornamental profile.Cross-rail 60 mm wide, vertical rail 80 mm wide.Profiled solid wood drawer front without frame and centrepanel.The surface is sealed with high-quality PUR1 matt silklacquer.Centre panel profiled with V-grooves at intervals of73 mm.Service featuresThe front is designed in accordance with the specific propertiesof the wood to guarantee a long service life.The surface must be wiped with a soft, damp cloth.Service featuresThe front is designed in accordance with the specificproperties of the wood to guarantee a long service life.The surface must be wiped with a soft, damp cloth.Service featuresThe front is designed in accordance with the specificproperties of the wood to guarantee a long service life.The surface must be wiped with a soft, damp cloth. 47. ARAGON ARAGON NWood framed front Wood framed front with ornamental nailsInfoBoxValue group Accessories Wood group EHandles Section 1Visible sides Section 2 UB, 3 OB, 4 HB, 5 UC, 6 OC, 7 HCUpright panels and shelves 2 cm to 10 cm, Section 13Light pelmet Section 14Cornice Section 14Carcase Standard colours: carcase white, 1131 light grey, 1257 graphiteFurniture board carcase Beech veneer, solid wood front edge, colour selection Section 1++ 1 Polyurethane ++Ordering instructionsIndicate whether surface should be lacquered oroiled.Special colour for front and carcase on requestCharged according to next higher PG or + 5%R-07Range Price group Wood groupARAGON 6 EARAGON brushed and limed, knob K 33 ZSolid oak framed front with profiled centre panel of solidknotty wood. Width of frame 65 mm; the surface issanded and lightly brushed, then sealed with high qualityPUR1 matt silk lacquer or oiled.Range Price group Wood groupARAGON N 7 EARAGON N brushed and limed, knob K 33 ZSolid oak framed front with profiled centre panel of solidknotty wood. Width of frame 65 mm with ornamentalnails. The surface is sanded and lightly brushed, thensealed with high-quality PUR1 matt silk lacquer or oiled.Service featuresThe front is designed in accordance with the specific propertiesof the wood to guarantee a long service life.The surface must be wiped with a soft, damp cloth.Service featuresThe front is designed in accordance with the specificproperties of the wood to guarantee a long service life.The surface must be wiped with a soft, damp cloth.Service featuresThe front is designed in accordance with the specificproperties of the wood to guarantee a long service life.The surface must be wiped with a soft, damp cloth. 48. ARLES ARLES mellowedWood framed front Wood framed frontInfoBoxValue group Accessories Wood group E 1Handles Section 1Visible sides Section 2 UB, 3 OB, 4 HB, 5 UC, 6 OC, 7 HCUpright panels and shelves 2 cm to 10 cm, Section 13Light pelmet Section 14Cornice Section 14Carcase Standard colours: carcase white, 1131 light grey, 1257 graphiteFurniture board carcase Beech veneer, solid wood front edge, colour selection Section 1++ 1 Polyurethane ++Ordering instructionsARLES cherrySpecial colour for front and carcase on requestCharge PG 7 + 5%ARLES Cherrywood mellowedSpecial colour for front and carcase on requestCharge PG 7 + 10%R-08Range Price group Wood groupARLES Cherrywooddark ruby 7brown patinated 7E 1E 1ARLES Cherrywood dark ruby, knob K 71 PTotal thickness of the front 21 mm.Framed front of solid cherry wood with veneer centrepanel. Width of frame 70 mm, drawer front without frameand centre panel. Surface finish with twofold staining andapplication of patina. The surface is sealed with high-quality PUR1 matt silk lacquer. The texture of the woodremains visible.Range Price group Wood groupARLES Cherrywood melloweddark ruby mellowed 7 + 5%brown patinated and mellowed 7 + 5%E 1E 1ARLES Cherrywood brown patinated and mellowedknob K 71 PTotal thickness of the front 21 mm.Framed front of solid cherry wood with traditionallyapplied signs of mellowing and veneer centre panel.Width of frame 70 mm, drawer front without frame andcentre panel. Surface finish with twofold staining andapplication of patina. The surface is sealed with high-quality PUR1 matt silk lacquer. The texture of the woodremains visible.Service featuresThe front is designed in accordance with the specific propertiesof the wood to guarantee a long service life.The combination of overlapping colours and a special sandingtechnique gives this front its Mediterranean flair as well as highservice value. The surface must be wiped with a soft, dampcloth.Service featuresThe front is designed in accordance with the specific propertiesof the wood to guarantee a long service life.The combination of overlapping colours and a special sandingtechnique gives this front its Mediterranean flair as well as highservice value. The surface must be wiped with a soft, dampcloth. 49. BAVARIAWood framed frontInfoBoxValue group Accessories Wood group EHandles Section 1Visible sides Section 2 UB, 3 OB, 4 HB, 5 UC, 6 OC, 7 HCUpright panels and shelves 2 cm to 10 cm, Section 13Light pelmet Section 14Cornice Section 14Carcase Standard colours: carcase white, 1131 light grey, 1257 graphiteFurniture board carcase Beech veneer, solid wood front edge, colour selection Section 1++ 1 Polyurethane ++Ordering instructionsSpecial colour for front and carcase on requestCharge + 5%R-09Range Price group Wood groupBAVARIA 7 EBAVARIA light sand patinated and mellowedhandle GM 96 BFramed front of solid spruce with solid wood centrepanel of knotty spruce. Width of frame 60 mm, drawerfront without frame and centre panel. The surface issealed with high-quality PUR1 matt silk lacquer. Thetexture of the wood remains visible.Service featuresThe front is designed in accordance with the specific propertiesof the wood to guarantee a long service life.The combination of overlapping colours and a special sandingtechnique gives this front its Mediterranean flair as well as highservice value. The surface must be wiped with a soft, dampcloth. 50. FRISIAWood framed frontInfoBoxValue group Accessories Wood group EHandles Section 1Visible sides Section 2 UB, 3 OB, 4 HB, 5 UC, 6 OC, 7 HCUpright panels and shelves 2 cm to 10 cm, Section 13Light pelmet Section 14Cornice Section 14Carcase Standard colours: carcase white, 1131 light grey, 1257 graphiteFurniture board carcase Beech veneer, solid wood front edge, colour selection Section 1++ 1 Polyurethane ++Ordering instructionsSpecial colour for front and carcase on requestCharge + 5%R-10Range Price group Wood groupFRISIA 7 EService featuresThe front is designed in accordance with the specific properties of the wood toguarantee a long service life. It owes its strength to the narrow-ringed wood.The sophisticated surface finish gives the front its flair and high service value.The surface must be wiped with a soft, damp cloth.FRISIA antique white blue patina knob K 72 PRift grade Nordic spruce.Solid wood frame with veneer centre panel and glued-indecorative profile. Width of frame 60 mm, drawer frontwithout frame and centre panel. The transparent finish isobtained by using special stains. The patina is applied bywiping by hand. The surface is sealed with high qualityPUR1 matt silk lacquer.antique whiteblue patinaantique whitegreen patinaantique whiteyellow patinaantique whitebrown patina 51. FRAMWood framed frontInfoBoxValue group Accessories Wood group EHandles Section 1Visible sides Section 2 UB, 3 OB, 4 HB, 5 UC, 6 OC, 7 HCUpright panels and shelves 2 cm to 10 cm, Section 13Light pelmet Section 14Cornice Section 14Carcase Standard colours: carcase white, 1131 light grey, 1257 graphiteFurniture board carcase Beech veneer, solid wood front edge, colour selection Section 1++ 1 Polyurethane ++Ordering instructionsSpecial colour for front and carcase on requestCharge + 5%R-11Range Price group Wood groupFRAM 7Frame and centre panel of solid OakEFRAM Coal handle GME 22/256Total thickness of the front 22 mm.Solid Oak framed front with profiled veneer centre panel.Width of frame 77 mm, drawer front without frame andcentre panel. The surface is sealed with high-qualityPUR1 matt silk lacquer or coloured hard oil.Choice of coloursCoal oakoiledCastle brown oakoiledCoral Chalk oak Cotton white oakoiledHavana oakoiledOcean grey oakoiledStone oakoiledNatural oak mellowedoiledService featuresWood is a natural material.Each front is unique, manufactured for a specific order and subject to naturalfluctuations in colour. The wood changes its colour in the course of time, due toexposure to natural light.The front is designed in accordance with the specific properties of the wood toguarantee a long service life.The surface must be wiped with a soft, damp cloth. 52. TREVISOWood framed frontInfoBoxValue group Accessories Wood group EHandles Section 1Visible sides Section 2 UB, 3 OB, 4 HB, 5 UC, 6 OC, 7 HCUpright panels and shelves 2 cm to 10 cm, Section 13Light pelmet Section 14Cornice Section 14Carcase Standard colours: carcase white, 1131 light grey, 1257 graphiteFurniture board carcase Beech veneer, solid wood front edge, colour selection Section 1++ 1 Polyurethane ++Ordering instructionsSpecial colour for front and carcase on requestCharge PG 7 + 10%R-12Range Price group Wood groupTREVISO 7+5% EService featuresThe front is designed in accordance with the specificproperties of the wood to guarantee a long service life.The surface must be wiped with a soft, damp cloth.TREVISO salmon green contrast waxed brown,knob K 35 ZR LSolid wood framed front with solid wood centre panel.Width of frame 88 mm, drawer front without frame andcentre panel. The carefully crafted surface finish isobtained by applying several coats of lacquer in differentcolours. The colour effects are due to wiping theindividual colour coats. The surface is sealed with high-quality PUR1 matt silk lacquer and waxed.yellow,orange browncontrast,waxed brownsalmon,green contrast,waxed browncream white,beige browncontrast,waxed browngrey,blue contrast,waxed brownpale green,green contrast,waxed brown 53. VIRTON VIRTON KFront with vertical crossbar and solid wood centre panelFront with vertical crossbar and melamine centre panelInfoBoxValue group Accessories Wood group E or Laminate group K or KHHandles Section 1Visible sides Section 2 UB, 3 OB, 4 HB, 5 UC, 6 OC, 7 HCUpright panels and shelves 2 cm to 10 cm, Section 13Light pelmet Section 14Cornice Section 14Carcase Standard colours: carcase white, 1131 light grey, 1257 graphiteFurniture board carcase Beech veneer, solid wood front edge, colour selection Section 1Ordering instructionsVIRTONSpecial colour for carcase on requestVIRTON KSpecial colour for melamine centre panel andcarcase on requestCharged according to next higher PGR-13Range Price group Wood groupVIRTON 5Oak steamedEVIRTON oak steamed knob K 35 ZOSolid wood front of steamed oak. Glued solid wood panelof steamed, knotty oak with solid wood rails in decliningwidths of 40 - 120 mm, 60 mm wide chamfered rails onthe right and left. Oiled finish.Range Price group Wood groupVIRTON K 3Rails of steamed oakmelamine centre panelEorValue groupK / KHVIRTON K 1131 light grey handle GMCG 12/224like VIRTON, but with melamine centre panelChoice of colours for melamine centre panel10261026 HGwhite10271027 HGalpine white13031303 HGivory white13581358 HGmagnolia13651365 HGvanilla11311131 HGlight grey13311331 HGbeige greyService featuresThe front is designed in accordance with the specificproperties of the wood to guarantee a long service life.The surface must be wiped with a soft, damp cloth.Service featuresThe front is designed in accordance with the specificproperties of the wood to guarantee a long service life.The surface must be wiped with a soft, damp cloth. 54. Product descriptionPageSummary of dimensions 1-02 to 1-04Carcase raster, System B and C 1-02Carcase dimensions, System B 1-03Carcase dimensions, System C 1-04Product quality 1-05 to 1-08Furniture board carcase 1-09Carcase variants 1-10 to 1-11Glass types 1-12Framed glass doors 1-13Handles, knobs 1-14 to 1-20Sensomatic, Touch-Latch SENSO, Touch-Latch 1-21Worktops and niche panels 1-22 to 1-231-01 55. Carcase raster, System B and CCarcase height, System BCarcase height, System C2 base unit heights, Sections 2 and 59 wall unit heights, Sections 3 and 65 tall unit heights, Sections 4 and 7Worktop thickness variable, Section 9Plinth height variableQUADRE - The Kitchen Without Handles: carcase dimensions, Section 17COTTAGE - CAMARGUE - The Kitchens With Front-Mounted Carcase Frames:COTTAGE CAMARGUE The Kitchens With Front Mounted Carcase Frames:Carcase dimensions, Section 181-02 56. Carcase dimensions, System BBottom ventilationnecessary in the plinth panelFor bottom ventilation, the ventilation grille is not5171-03 57. Carcase dimensions, System CBottom ventilationnecessary in the plinth panelFor bottom ventilation, the ventilation grille is not775171-04 58. Product qualityQuality of material and workmanshipThe kitchen is a workplace which imposes high demands on the materials and design.Meeting these requirements is the driving force underlying our product development.Materials which do not meet the high demands imposed by day-to-day work in the kitchenare not used in our products, regardless of whether or not they reflect momentary fashiontrends.The laminate surface comprises a directly applied, high-quality melamine coating ormulti-layer laminate material.The laminate edging on doors and the front of carcases is made from impact-proofpolypropylene or multi-layer laminate material and glued with waterproof PU3 glue.The edging can withstand heat up to approx. 160 C.The melamine or laminate surfaces and edging have high mechanical strength,are easy to care for, enduringly lightfast, permanently easy to clean andhighly resistant to common household chemicals.The surface finishes and edging used are compatible with foods.Standard carcaseSides and shelves 19 mm thick, melamine coating, with flat structureBack panels 8 mm thick, melamine coating on both sides, with flat structureBack panels 8 mm thick, melamine coating on both sides, with flat structureGlued into the side, bottom and crossbar on all 4 sidesEdging Laminated on 4 sides. Carcase finish white, front edge 2 mm PP in colour of frontCarcase finish 1131 light grey and 1257 graphite, front edge 2 mm PP in colour of carcaseThe edge is glued with PU glueShelves 19 mm thick, white melamine coating, edges on all sides, 2 mm PP edge on front sideColoursVisible sides Colour-matched with the frontPlinth system Adjustable plinth feet from 8 to 24 cmPlinth panel of coreboard glued with waterproof glue, with sealer strip at the bottomCoated with HPL laminate, HPLD laminate, veneer or lacquerCoreboard carcase 19 mm with beech veneer on both sides, front edge veneered to match the frontSpecial veneers, choice of colours and further details on page 1-09whitefront edge of carcasein colour of front1131 light greyfront edge of carcasein colour of front1257 graphitfront edge of carcasein colour of front1-05 59. Product qualityFittingsDrawers and Standard: Full-extension steel frame system with concealed runners, whitepull-outs Special equipment: Stainless steel frames with concealed runners, page 15-03Special equipment: Solid wood frames in beech, maple or nutwoodwith bottom runners, page 15-11Standard runners Carcase width up to 60 cm, drawers and pull-outs with a load capacity up to 40 kgCarcase width over 70 cm, drawers and pull-outs with a load capacity up to 70 kgCarcase width over 100 cm with side stabilization for smoother runningBottom runners Carcase width up to 60 cm, drawers and pull-outs with a load capacity up to 40 kgCarcase width over 70 cm, drawers and pull-outs with a load capacity up to 60 kgSensomatic Details, page 1-21Touch-Latch Details, page 1-21Hinges All-metal hinge with various opening angles, can be adjusted in three directionsWall unit All-metal hinge concealed behind the back panel, can be adjusted in three directionssuspensions5 year warrantyEmission classThe limit permitted by the Federal Health Office foremission class E1 is undershot by our kitchen furniture.BAX Kchenmanufaktur gives the retailer a 5-year warranty as from the date of delivery for all furniture partsmanufactured by the company itself. A warranty period of 2 years applies for moving functional fittings.Accessories, such as electrical appliances, sinks, sanitary fittings, waste collection systems, light fixtures, etc. areexcluded from the BAX warranty. These are governed by the respective manufacturers warranty conditions.Damage due to heat transmitted by electrical, heating or gas appliances is excluded.Damage due to installation, use and water is excluded from the warranty, as are changes in the colour of veneered andsolid wood parts due to the effects of light and climate.The warranty exclusively covers the replacement of defective parts, be it through repair or physical replacement, at ourdiscretion. Compensation of installation and consequential costs is excluded.Entitlement to performance under the warranty shall be extinguished if parts which we have delivered are modified byunauthorized or unqualified persons without our explicit consent.Warranty claims shall be reported to us by the dealer within a proscriptive period of 10 days after acquiring knowledge ofthe defect.The warranty period shall not be extended by replacement or repair of the parts concerned.1-06 60. Product qualityFurniture board plinth panelglued with waterproof gluewith HPL1 laminateand grooved sealing profileSolid alu plinth cornerCarcase material 19 mmBack panel 8 mmGrooved and glued in all-roundCarcase edge 2 mm thick,impact-proof PP2 materialWaterproof and heat-resistantPU3 glued bondWorktop withintegratedwood edgeDue to the stressesimposed on the edging,we particularly recommendthe APIS edge.Easy care throughre-oilingThe BAX worktop sealer strip insolid aluminium,5 mm high,without visible sealing profileAluminium wall sealer stripfor use with a 19 mmwall covering panelFurniture board carcasePanels 19mm thickBack panel of 8 mm plywoodGrooved and glued in all-roundStainless steel supportto stabilizethe shelves1 High-Pressure Laminate2 Polypropylene3 Polyurethane1-07 61. Product quality3-dimensional adjustablemetal suspension for wall unitsUnit doors with3 hingesSide stabilizationover 100 cm unit widthOption:Real stainless steel coverEdged on 4 sides forbottom shelf of sink unitPl tiPlasticcutlery traySolid woodcutlery traysStacked plate shelfDrawer andpull-out basewith non-slip surfaceand separating barSpecial partitionsSolid wood pull-out, nutwood1-08 62. Furniture board carcaseStandard finishes Standard colours on natural lacquered beech:Furniture board, natural beech veneer, lacquered: BFNDrawer and pull-out base in Furniture board natural beech veneer, lacquered, without non-slip matNon-slip mat, loose: Section 15Standard frame whiteDescription Order No.cmA - 7Beechveneer...BFNA - 7Standardcolours...BFA - 7Frontcolour...BFFBase unit TKU 3 up to 59 78 86 93UB and UC TKU 6 60 91 99 108Differencein relation to standard carcasewhite, light grey, graphiteBF black-brownBF terraBF quartz BF amberUB and UC TKU 6 60 91 99 108TKU 7 up to 150 101 110 119Wall unit TKO 3 up to 59 67 74 83OB and OC TKO 6 60 78 86 95TKO 7 up to 150 91 100 109Tall unit TKHK 3 up to 59 192 212 229HBK, HBL, HCK and HCL TKHK 6 60 213 245 262TKHK 7 up to 150 246 271 288Tall unit TKHH 3 up to 59 280 308 325HBH, HBM, HBS, HCH, HCM and HCS TKHH 6 60 314 345 362TKHH 7 up to 150 360 396 413Extractor hoods TKKA 121 130 1391-09 63. Carcase variantsBase and tall units, System B and CDescription Order No.DepthcmHeightcmWidthcmKPnotstandardKH E / L /KDE 1 L 1Base units KA58150 58 up to 81 up to 50 96 148 273 521 762KA58160 up to 60 105 162 299 570 834KA58110 up to 100 142 219 404 772 1128KA58115 up to 150 188 291 535 1022 1495KA68150 68 up to 81 up to 50 112 174 320 611 893KA68160 up to 60 123 191 351 671 981KA68110 up to 100 166 257 474 904 1322Value groupDifference in points in relation to standardcarcaseValue group Surface Edge PageStandard Melamine Carcase white Front colour 1-051131 light grey 1131 light grey 1-051257 graphite 1257 graphite 1-05...KP not standard Melamine PP/HPL K-02 and K-03...KH HPL PP/HPL K-04 to K-07...KD HPLD HPLD K-08...KE HPL Genuine wood Wood group E / E1 F-02, F-04 and F-05...E Genuine wood Genuine wood Wood group E / E2 F-02 and F-04...E1 Genuine wood Genuine wood Wood group E 1 F-05...L DD matt lacquer (L) + DD structure lacquer (SL) L-05...L1 High gloss lacquer (HG) + silk gloss lacquer (SG) L-05KA68115 up to 150 220 341 627 1198 1751Tall units KA31350 37 up to 137.2 up to 50 113 174 321 613 897KA31360 up to 60 125 192 354 677 989KA31310 up to 100 172 265 489 933 1364every additional 10 cm KA31315 10 20 31 56 107 157KA51350 58 up to 137.2 up to 50 177 274 504 962 1406KA51360 up to 60 195 301 555 1060 1549KA51310 up to 100 269 416 766 1463 2139every additional 10 cm KA51315 10 31 48 88 168 246KA31650 37 up to 162.2 up to 50 122 189 348 665 973KA31660 up to 60 134 207 382 729 1065KA31610 up to 100 181 280 516 985 1440every additional 10 cm KA31615 10 21 32 59 113 166KA51650 58 up to 162.2 up to 50 192 296 546 1043 1524KA51660 up to 60 210 325 599 1143 1671KA51610 up to 100 284 439 808 1544 2257every additional 10 cm KA51615 10 33 50 93 178 2601-10 64. Carcase variantsWall units, roller shutter units, sliding door units and top units, System B and CDescription Order No.DepthcmHeightcmWidthcmKPnotstandardKHE / L /KDE 1 L 1Wall units KA 35050 27 / 37 up to 50 up to 50 47 72 133 253 370Roller shutter units KA 35060 up to 60 52 80 148 282 413Sliding door units KA 35010 up to 100 78 121 223 426 623KA 35012 up to 120 85 132 243 464 678every additional 10 cm KA 35015 10 8 13 23 44 65KA 36250 27 / 37 up to 62 up to 50 53 82 151 288 421KA 36260 up to 60 56 87 160 305 446Value groupDifference in points in relation to standardcarcaseValue group Surface Edge PageStandard Melamine Carcase white Front colour 1-051131 light grey 1131 light grey 1-051257 graphite 1257 graphite 1-05...KP not standard Melamine PP/HPL K-02 and K-03...KH HPL PP/HPL K-04 to K-07...KD HPLD HPLD K-08...KE HPL Genuine wood Wood group E / E1 F-02, F-04 and F-05...E Genuine wood Genuine wood Wood group E / E2 F-02 and F-04...E1 Genuine wood Genuine wood Wood group E 1 F-05...L DD matt lacquer (L) + DD structure lacquer (SL) L-05...L1 High gloss lacquer (HG) + silk gloss lacquer (SG) L-05KA 36210 up to 100 78 121 223 426 623KA 36212 up to 120 90 138 255 487 711every additional 10 cm KA 36215 10 9 13 24 47 68KA 37550 27 / 37 up to 75 up to 50 65 101 185 354 518KA 37560 up to 60 73 112 207 395 577KA 37510 up to 100 102 158 291 556 813KA 37512 up to 120 117 181 333 636 930every additional 10 cm KA 37515 10 11 17 32 61 89KA 38750 27 / 37 up to 87 up to 50 78 121 223 426 623KA 38760 up to 60 88 136 250 478 699KA 38710 up to 100 125 193 356 680 994KA 38712 up to 120 144 222 409 780 1141every additional 10 cm KA 38715 10 14 21 39 75 109KA 31050 27 / 37 up to 100 up to 50 83 129 237 452 661KA 31060 up to 60 93 143 264 504 737KA 31010 up to 100 130 201 369 706 1031KA 31012 up to 120 148 229 422 806 1179every additional 10 cm KA 31015 10 14 22 40 77 113Top units KA 37050 27 / 37 up to 70 up to 50 43 66 122 233 341Roller shutter top units KA 37060 up to 60 48 75 137 262 383KA 37070 up to 100 63 97 179 343 501KA 37012 up to 120 70 109 201 383 560every additional 10 cm KA 37015 10 7 10 19 37 54KA 31450 27 / 37 up to 145 up to 50 100 155 285 544 796KA 31460 up to 60 110 170 312 596 871KA 31414 up to 100 147 227 418 798 1166KA 31412 up to 120 165 255 469 896 1309every additional 10 cm KA 31415 10 16 24 45 86 1251-11 65. Glass typesClear glassSatinatoOrnament 504Antique 75Ornament 550Smooth exteriorWire-mesh reinforced glassapprox. 7 mm thickNot suitable forframed glass doors with aluminium profileMasterligneClear glass with bevelled edge1-12 66. Framed glass doorsFramed glass doorGlass frame to matchthe frontAluminium framed glass doorWidth of frame 19 mmVENTURA FramePassepartout 60 mm wideGlass onwood-based baseboardSection GVENTURAGlass onwood-based baseboardSection GVENTANAPassepartout 50 mm wideGlass onaluminium baseboardSection GFramed glass doorwith glazing barsSame profiling asfront panelFramed glass doorwith glazing barsSame profiling asfront panel1-13 67. HandlesIllustration Description Order No. A - 7 A - 7Pricediffer-enceUnitpriceWPRound bar GME 15/224 AN 24Nickel-plated, aged GME 15/224 AN WP 33Diameter 15 mNickel-plated baseHeight 44Drilling distance 224 mmRound bar, stainl. steel GM 15/224 E 16Diameter 15 mm GM 15/224 E WP 23Nickel-plated baseHeight 44 mmDrilling distance 224 mmStainl. steel anodized GME 12/224 16Cross-section 12 mm GME 12/224 WP 23Height 42Drilling distance 224 mmHigh-gloss chrome GMCG 12/224 16Cross-section 12 mm GMCG 12/224 WP 23Height 42Drilling distance 224 mmPrice groupStainless steel GM 15/224 ER freeDiameter 15 mm GM 15/224 ERWP 11Height 40Drilling distance 224 mmStainless steel GM 14/224 EE freeCross-section 14 mm GM 14/224 EE WP 11Height 40Drilling distance 224 mmStainl. steel anodized GME 225/128 16Diameter 16 mm GME 225/128 WP 23Height 39 mmDrilling distance 128 mmStainl. steel anodized GME 224 16Diameter 19 mm GME 224 WP 23Height 38 mmDrilling distance 224 mmStainl. steel anodized GME 22/256 freeCross-section 22 mm GME 22/256 WP 11Height 42Drilling distance 256 mmStainless steel GM 16/160 E freeDiameter 16 mm GM 16/160 E WP 12Height 39 mmDrilling distance 160 mmStainl. steel anodized GM 14/192 freeDiameter 14 mm GM 14/192 WP 8Nickel-plated baseHeight 36 mmDrilling distance 192 mm1-14 68. HandlesIllustration Description Order No. A - 7Matt chrome-plated GM 21/192 freeCross-section 21 mm GM 21/192 WP 12Height 38 mmDrilling distance 192 mmHigh-gloss chrome GMCG 128 freeCross-section 22 mm GMCG 128 WP 13Height 39 mmDrilling distance 128 mmNickel-plated GM 96 K freewith ornamental screws GM 96 K WP 8Height 29 mmDrilling distance 96 mmRound bar, beech GH 18/224 B 15Diameter 18 mm GH 18/224 B WP 23Chrome baseHeight 45 mmDrilling distance 224 mmFurther versions:Round bar, maple GH 18 /224 A 15GH 18 /224 A WP 23Price groupSystem handleDia. 12 mmHeight 36 mmDrilling distances:320/224/192/160/128/96/64 mmMatt chrome GM 12/320 freeGM 12/320 WP 8Matt chrome GM 12/224 freeGM 12/224 WP 6Matt chrome GM 12/192 freeGM 12/192 WP 6Matt chrome GM 12/160 freeGM 12/160 WP 6Matt chrome GM