BASICS PC104 IP/Voice Datasheet 

KEY FEATURESOEM preferred PC104 form factor

Designed for simple integration into third-party systems

Wide range of models available

Features match the equivalent boxed product

IP Router Acceleration Network Security

Four wire Secure voice POTS voice

Radio VoIP Hand portable

BASICS PC104 is the ideal format for integrating BASICS unit functionality into third party systems. This datasheet describes PC104 variants of BASICS IP and BASICS Voice (FXS, FXO, Radio Relay and Four Wire).

CREATED WITH INTEGRATORS IN MIND

The BASICS PC104 range is the essential networking toolbox, offering a simplified approach to the deployment of networking, voice and IP solutions.

Designed for applications where efficiency is required and low Size, Weight and Power is critical, the BASICS PC104 range provides application specific hardware for every day challenges in system deployment

OPTIMIZATION AND ACCELERATION

Vocality's optional voice optimization and data acceleration are included as standard, providing reduced bandwidth requirements by up to 60%. Ideal for use over satellite networks.

INDUSTRY STANDARD FORMAT

Adhering to the PC104 standard the products allow for simple integration into third party communication system and man packs.

All platforms can be delivered in a variety of formats, ensuring both standard product network operators and tactical systems integrators have a form factor that meets their requirements.

MODELS AVAILABLE IN THIS FORMAT:

BASICS IP Router

BASICS Radio Relay RoIP gateway

BASICS Four Wire RoIP gateway

BASICS Voice FXS for analog phone connectivity

BASICS Voice FXO for analog PBX connectivity

BASICS Hybrid which includes RoIP, IP Router and analog phone connectivity in a single unit (see separate BASICS PC104 Hybrid datasheet)

For   more   about   functionality   see   separate  datasheets for each product.

Technical DataMECHANICAL

BASICS IP Router BASICS Radio Relay

BASICS FourWire

BASICS Voice FXS BASICS Voice FXO

Form Factor: PC104-Plus card with Heat JacketCooling: Conduction by Heat Jacket to hostOperating Conditions (OEM product)*: With Heat Jacket:

-40degC to +80degC case temperature0-95%RH non-condensing

0 to +80degC case temperature0-95%RH non-condensing

Operating Conditions (OEM product)*:Without Heat Jacket:

N/A -40degC to +70degC case temperature

0-95%RH non-condensing

N/A N/A

MTBF: >200,000hoursat 60degC

>175,000hoursat 70degC

>150,000hoursat 70degC

Dimensions: 3.78 x 3.55 x 0.59in / 95.89 x 90.17 x 15.1mmIndicators: LED drivers via M&C portWeight: 0.44lb / 200gElectrical:          Supply Input Rating: 5V DC +/-5%Consumption(typ): 12.5W 2.5W 9.5W 3WPoE Secondary Input: -48V DC isolated N/A N/A N/AConnectors:          DC Power: Screw-down terminalsPoE: 3-way header N/A N/A N/AM&C: Via 10-way AMP System-50 RA connector for LEDs/consoleUplink, Downlink Ethernets: 10-way AMP System-50 RA connectorSwitch Port Ethernets: 4 ports on single 34-

way AMP System-50 RAconnector

N/A N/A N/A

Analog voice ports: N/A 4 ports on single 34-way AMP System-50 RA connector

4 ports on single 10-way AMP System-50 RA connector

Reset: Via 2-pin 2.5mm latching headerPart number: 68551

68551/CC (with conformal coating)68551/CONN (with 

connectors)68551/CONN/CC (with 

connectors and conformal coating)

68564/168564/CONN/1  

(with connectors)68564/NHJ/1 (without heat 

jacket)68564/NHJCONN/1 

(without heat jacket but with connectors)

68554/1,68554/CONN/1  

(with connectors),68554/NHJ/1 (without heat 

jacket),68554/NHJCONN/1 

(without heat jacket but with connectors)

68593/168593/CONN/1   (with 

connectors)

68556/168556/CONN/1   (with 

connectors)

 HARDWARE OPTIONSBASICS IP Serial ModuleElectrical Interface: RS530Format: Synchronous transparentNumber of Ports: 1Presentation: DTE (or DCE by cable selection)Speed: Up to 25Mbps aggregate, 10Mbps tributaryConnector: Via 20-way AMP System-50 RA connector for PC104 versionPart number: 68552, 68552/CC (with conformal coating)

 BASICS IP, BASICS Radio Relay and BASICS Four Wire - Transition Board (Adaptor PCB for RJ45 Connectors)Part number: BASICS/TRANSITION/34

 BASICS Voice FXS and BASICS Voice FXO - Transition Board (Adaptor PCB for RJ45 Connectors)Part number: BASICS/TRANSITION/10

 * When the equipment is adequately protected from direct user contact, the equipment will reliably operate with case temperature within the specified range. When the equipment is installed in a user-accessible location,  adequate heatsinking must be provided to ensure the case temperature does not exceed 70degC (BS EN60950-1:2006 Table4C) for user protection.BASICS PC104 IP/Voice range are products under continuous development.Information subject to change. Correct at time of printing. Mar 2017.Please be advised that Vocality offers two variants of VOS software — one including IPSec and SSH features and one without these features.  The IPSec / SSH variant of the software is subject to UK dual-use export control restrictions, whereas the software without IPSec / SSH is not subject to specific export control.

Cubic Mission SolutionsLydling Barn, Lydling Farm, Puttenham LaneShackleford, Surrey       GU86AP United KingdomTel +44 1483813130 Fax +441483813131E-mail: sales@vocality.comwww.vocality.com

Cubic Mission Solutions21580Beaumeade Circle, Suite 230Ashburn VA 20147United StatesTel (703) 787 9133 Fax (703) 787 9136E-mail: sales-usa@vocality.comfollow us on twitter @vocality