Base Station Antennas

RFI Short Form Catalogue

Base Antennas

2

Local Support

NSW99 Station RoadSeven Hills NSW 2147Phone: (02) 8814 2300Fax: (02) 9630 0844

VIC46 Corporate BoulevardBayswater VIC 3153Phone: (03) 9751 7500Fax: (03) 9751 7588

WA4/45 Tomlinson RoadWelshpool WA 6106Phone: (08) 9331 0600Fax: (08) 9311 0688

QLD and International Sales30 Raubers RoadBanyo QLD 4014Phone: (07) 3621 9400Fax: (07) 3252 5505

International Support

RFI EMEA (UK)Bicester Innovation CentreCommerce HouseTelford RoadBicester OX26 4LDUnited KingdomPhone: +44 (0) 1869 255 772

RFI Americas9329 Ravenna RoadSuite CTwinsburg OH 44087 USAPhone: +1 330 486 0706Fax: +1 330 486 0705

RFI New ZealandPO Box 38-626Howick Auckland NZPhone: +64 9 537 2683Fax: +64 9 537 2684

RFI have been supporting Australian and international customers with unique base station antenna designs for over 30 years. The comprehensive range caters to frequencies from 27MHz to 5800MHz and includes dipole arrays, collinears, yagis, side mount dipoles, corner reflectors and phasing harnesses. The latest patented MeanderTM line collinear and corporate collinear designs rewrite the rules on bandwidth and performance.

We strive to provide a service that is of world standard yet retain the agility of a small player. Our motivated team of engineering and manufacturing professionals pride themselves on their design philosophy of “bettering the best”. Our experience pays off when new technologies require an antenna solution that matches the latest in sophisticated design.

RFI utilises:

• The latest in antenna design software

• Specialised test equipment

• An enormous depth of experience providing solutions to carriers, manufacturers and end users

• A flexible manufacturing environment for base and mobile antennas

And we can supply everything else you need to complete your system. Antenna combining equipment, repeaters, coaxial cables, connectors, lightning protection, solar power, DC power supplies, hand portable antennas, installation accessories…and more!

This catalogue is intended as our abbreviated guide to RFI’s range of base station antennas. Our most up to date information is always on our website and we encourage you to utilise it when needed or alternatively contact one of our sales specialists for any further information you may require.

RFI

3

Contents

Ground Plane Antennas page 4 Coaxial Dipole Antennas page 6 Side Mounted Dipole Antennas page 8

Dipole Array Antennas page 10

Screened Dipole Antennas page 14 Collinear Antennas page 16

- Meander Design page 17 - Manufactured to Frequency Designs page 19 - Corporate Design page 20

Yagi Antennas page 22

Wireless Broadband Antennas page 26

4

For complete, up to date product specifications on individual items please visit www.rfi.com.au

Ground Plane Antennas

The GP series is a range of omnidirectional unity gain adjustable ground plane antennas ideal for

local area coverage when a high gain antenna is not required or justified. The broad vertical

beamwidth offers excellent null fill for consistent signal coverage. GP series antennas are easily

tuned in the field by adjusting the positions of the ground plane elements.

5


Ground Plane Antennas70-175 MHz

Special Features

• Simplefieldtuningbyadjustingthepositionoftheradials

• Lightweightandeasytomount• Broadverticalbeamwidthforexcellentnullfill

• Compact-shippeddisassembledforeaseofhandling

• Flexiblefinishesalodined(STD)blackpowdercoatedorstainlesssteelconstruction

Frequency MHz Gain dBi (dBd) Tuned Bandwidth MHz Model

70-85 2 (0) 5 GP1

118-136 2 (0) 10 GP3

137-151 2 (0) 10 GP4

148-175 2 (0) 15 GP2

Operating Bandwidth

75 76 77 78 79 80 81 82 83 84 85

( )

GP1 E Plane

GP1 Typical Response VSWR

6


Coaxial Dipole Antennas

Our range of vertical enclosed dipoles are unity gain VHF and UHF antennas

ordered to specific frequencies for either simplex or duplex operation. These

antennas provide low wind and tower loading with excellent omnidirectionality

and null fill characteristics.

7


Coaxial Dipole Antennas30-960 MHz

Special Features

• Lowwindandtowerloading• DCgroundedforlightningprotectionandthe

reductionofprecipitationstaticnoise• Unitygainomnidirectionalradiationpatternwith

excellentnull-fillcharacteristics

• Modelsavailableinruggedisedconstructionwithheavydutyblackfibreglassradome-aidinginiceshedding

• Modelsavailablewithstainlesssteelmountingsectionforcorrosiveenvironments

Frequency MHz Gain dBi (dBd)

Bandwidth Lengthm

Special Features Model

30-50 2 (0) 1% 5.5 COD30

66-140 2 (0) 2% 3.4 COD1

66-141 2 (0) 5% 3.0 COD12

66-142 2 (0) 5% 2.7 COD14

140-205 2 (0) 5 MHz 1.7 COD2

140-175 2 (0) 5 MHz 1.8 Ruggedised black radome for ice shedding COD22

140-205 2 (0) 5 MHz 1.7Stainless steel mounting tube for corrosive

environmentsCOD24

400-420 2 (0) Full band 1 COD4-65

450-470 2 (0) Full band 0.9 COD4-70

470-490 2 (0) Full band 0.9 COD4-71

480-500 2 (0) Full band 0.9 COD4-63

500-520 2 (0) Full band 0.9 COD4-72

375-520 2 (0) 4% Variable Custom manufactured to 4% of bandwidth COD4-99

820-880 2 (0) Full band 0.8 COD8-81

850-930 2 (0) Full band 0.8 COD8-82

600-960 2 (0) 80 MHz Variable Custom manufactured to 4% of bandwidth COD8-99

( )155 156 157 158 159 160 161 162 163 164 165

Operating Bandwidth

COD2 E Plane COD2 Typical VSWR Response

CO

D4

CO

D22

CO

D1

8


Side Mounted Dipole Antennas

The SMD series of side mount dipoles are a range of broadband unity gain

dipoles which can be used as a single antenna for short range applications

or, if desired, phased together to provide high gain array coverage

characteristics.

9


Side Mounted Dipole Antennas70-960 MHz

Special Features

• Canbephasedtoprovide3dBdor6dBdgaininavarietyofpatternstailoredtosuitspecificrequirements

• Highstrengthruggedisedandstainlesssteelversionsavailable

• Fullbandwidthcoverageforbothsingleantennasandphasedarrays-idealincommunitysites

• Modelsavailablewith7/16DINorN-typeconnectors

• LowPIMratingofsidemountdipolesfeature<-150dBcspecification

• Superiorlightningprotectioncharacteristics• Anextensiverangeofphasingharnessesavailable

Standard Range of Side Mounted DipolesFrequency MHz Gain dBi (dBd) Bandwidth Description Model

70-85 2 (Unity) Full band Heavy duty aluminium SMD1

70-85 2 (Unity) Full band Heavy duty black powder coated aluminium for ice shedding SMD12

70-85 2 (Unity) Full band Stainless steel SMD14

66-108 2 (Unity) 10% Heavy duty aluminium SMD1-99

148-175 2 (Unity) Full band Heavy duty aluminium SMD2

148-175 2 (Unity) Full band Heavy duty black powder coated aluminium for ice shedding SMD22

148-175 2 (Unity) Full band Stainless steel SMD24

108-200 2 (Unity) 10% Heavy duty aluminium SMD2-99

746-870 2 (Unity) Full band Welded alodined aluminium SMD7-90


Low PIM Range of Side Mounted Dipoles70-85 2 (Unity) Full band Welded alodined aluminium SMD10-28


148-174 2 (Unity) Full band Welded alodined aluminium SMD20-41-DIN


400-520 2 (Unity) Full band Stainless steel SMD41-67

360-600 2 (Unity) 20% Welded alodined aluminium SMD4-99

360-600 2 (Unity) 20% Stainless steel SMD41-99

( )140 144 148 152 156 160 164 168 172 176 180

Operating Bandwidth

SMD20-41 H Plane SMD20-41 Typical VSWR Response

H Plane at ¼ wave antenna to mast spacing

10


Dipole Array Antennas

Ever increasing costs and site density requirements are reducing the availability of

antenna positions on prime sites. In order to reduce the overall number of antennas the RFI dipole array series provide systems engineers

and site owners with a flexible solution to reduce antenna numbers.

BA8080-67AntennasonEmpireStateBuilding-NewYorkCity

11


BA8080-67AntennasonEmpireStateBuilding-NewYorkCity

Dipole Array Antennas136-520 MHz

Special Features

• Allweldedconstruction• Internallyroutedhermeticallysealedsilverplated

PTFEphasingharness• Operatesovertheentirebandwithnoneedfor

tuningoradjustment

• 100%anechoicchambertestedandcertifiedtoindustryleadinglowPIM(-150dBc)design

• Highpowerhandlingupto750W(VHF)500W(UHF)

• Fixedelectricaldowntilitavailableonrequest• VSWRof<1.5:1acrossentireband• Superiorlightningprotectioncharacteristics• Availablewith7/16DINorN-typeconnectors• Flexiblefinishesalodined(STD)blackpowder

coatedorstainlesssteelconstruction

BA Omnidirectional Pattern

EA Elliptical Pattern OA Offset Pattern

FrequencyMHz

Gain dBi

(dBd)

Dipoles Lengthm

Model

136-174 5 (3) 4 3.5 BA40-41

136-174 8 (6) 8 6.3 BA80-41

330-420 5 (3) 4 2.1 BA40-57

330-420 8 (6) 8 3.0 BA80-57

400-520 5 (3) 4 2.1 BA40-67

400-520 8 (6) 8 3.0 BA80-67

400-520 11 (9) 16 5.0BA160-67-T3

BA (Omnidirectional) modelsFrequency

MHzGain dBi

(dBd)

Dipoles Lengthm

Model

136-174 7 (5) 4 3.5 EA40-41

136-174 10 (8) 8 6.3 EA80-41

330-420 7 (5) 4 2.1 EA40-57

330-420 11 (9) 8 3.0 EA80-57

400-520 7 (5) 4 2.1 EA40-67

400-520 11 (9) 8 3.0 EA80-67

EA (Elliptical) modelsFrequency

MHzGain dBi

(dBd)

Dipoles Lengthm

Model

136-174 7 (5) 2 3.5 OA20-41

136-174 11 (9) 4 6.3 OA40-41

330-420 7 (5) 2 2.1 OA20-57

330-420 11 (9) 4 3.0 OA40-57

400-520 7 (5) 2 2.1 OA20-67

400-520 11 (9) 4 3.0 OA40-67

OA (Offset) models

12


330-520 MHz

Single Section Multiple ArraysAcombinationofanytwodipolearrays,eitheromnidirectionalBAmodels,ellipticalEAmodelsoroffsetOAmodelsmountedtoacommonboomtoeffectivelyprovidetwoseparateantennasontheonemast.Theonephysicalstructureisinfacttwoindividualantennaswithseparatefeedsforeachantenna.

Combination Arrays

Frequency MHz Length m Description Model

Omnidirectional Models

330-420 3 2 x 3dBd omni with separate feeds BA4040-57

400-520 3 2 x 3dBd omni with separate feeds BA4040-67

Elliptical Models

330-420 3 2 x 5dBd elliptical with separate feeds EA4040-57

400-520 3 2 x 5dBd elliptical with separate feeds EA4040-67

Offset Models

400-520 3 2 x 5dBd offset with separate feeds OA2020-67

Dual Section Combination ArraysThesearraysaresuppliedintwosectionsforeaseofshipping.Thelowersectionismadeonalargerdiametermaststockwiththeupperarraytelescopingintothelowersection.BothupperandlowersectionscanbeanyoneofourstandardUHF(only)arraysorcanbecoupledwithaphasingharnessforevenhighergain.Eachlowersectionissuppliedwithathroughharnesstoconnecttotheuppersection.TheimagebelowshowsaBA80-67LlowersectionandaBA80-67uppersection.

Frequency MHz Lower section length m

Description Model

Omnidirectional Models - Lower section

330-420 3 2 x 3dBd omni with separate feeds BA4040-57L

330.420 3 1 x 6dBd omni BA80-57L

400-520 3 2 x 3dBd omni with separate feeds BA4040-67L

400-520 3 1 x 6dBd omni BA80-67L

Elliptical Models - Lower section

330-420 3 2 x 5dBd elliptical with separate feeds

EA4040-57L

330-420 3 1 x 8dBd elliptical EA80-57L

400-520 3 2 x 5dBd elliptical with separate feeds

EA4040-67L

400-520 3 1 x 8dBd elliptical EA80-67L

Offset Models - Lower section

400-520 3 2 x 5dBd offset with separate feeds OA2020-67L

400-520 3 1 x 9dBd offset OA40-67L

When ordering a dual section combination array you will need to order as follows:1. Specify your lower section from the list above eg. BA80-67L PLUS2. Specify a single upper section array from our selection of standard dipole array antennas listed on the previous page eg. OA40-67

13


Combination Collinear & Dipole ArraysSimilartothedualsectionarray,thistypeofcombinationarrayutilisesacollinearantennaastheuppersectionofthearrayideallysuitedtoapplicationswheretowerloadingisaconsideration.ThecollinearfitsintothelowersectionwhichcanessentiallybeanystyleofourhighergainUHF(only)dipolearrays.EachlowersectionissuppliedwithathroughharnesstoconnecttoyourchoiceofCOL8(UHF),COL45(UHF),COL15(VHF)orCOL17(VHF)collinears.TheimagebelowshowsaBX80-67lowersectionwithaCOL8uppersection.

Frequency MHz Lower section length m

Description Model

Omnidirectional Models - Lower section

400-520 2 1 x 3dBd omni BX40-67

400-520 3 2 x 3dBd omni with separate feeds BX4040-67

400-520 3 1 x 6dBd omni BX80-67

Elliptical Models - Lower section

400-520 2 1 x 5dBd elliptical EX40-67

400-520 3 2 x 5dBd elliptical with separate feeds EX4040-67

400-520 3 1 x 8dBd elliptical EX80-67

Offset Models - Lower section

400-520 3 2 x 5dBd offset with separate feeds OX2020-67

400-520 3 1 x 9dBd offset OX40-67

When ordering a combination collinear and dipole array you will need to order as follows:1. Specify your lower section from the list above eg. BX80-67 PLUS2. Specify your COL Collinear either COL15, COL17, COL8 (and remember to specify frequency)

14


Screened Dipole Antennas

These screened dipole antennas deliver high gain and excellent front to back ratios for

critical path or high interference applications. Constructed with a grid style back screen to

maximise pattern control, these all welded screens are of alodined finish for corrosion protection and utilise stainless steel fittings.

15


Screened Dipole Antennas136-960 MHz

Special Features

• Highfronttobackratiotoallowfrequencyre-usebytailoringcoverageareas

• Shippedunassembledforeaseofhandling.Easilyassembledonsite

• DirectDCgroundedforlightningprotectionandreductionofprecipitationstaticnoise

• Highpowerhandlingupto750W(VHF),500W(UHF)

• Operatesovertheentirebandwithnoneedfortuningoradjustment

• Internallyrouted,hermeticallysealed,silverplatedPTFEcablesharness

• VSWRof<1.5:1acrossentireband

FSA-20-67 E Plane

FSA-20-67 H Plane

CSA-20-67-DIN E Plane

CSA-20-67-DIN H Plane

Frequency MHz Bandwidth Gain dBi (dBd) Length m HBWo VBWo Model

136-174 26 MHz 9 (7) 1.3 x 1.3 x 1.2 62 69 CR2

148-174 Full band 9 (7) 1 x 1 106 70 FSA10-41-DIN

148-174 Full band 11 (9) 3.5 x 1 108 34 FSA20-41-DIN

406-512 Full band 7 (5) 0.5 x 0.6 121 71 FSA10-67-DIN

406-512 Full band 8 (6) 2.1 x 0.6 132 35 FSA20-67-DIN

406-512 Full band 11 (9) 3 x 0.8 135 17 FSA40-67-DIN

400-520 Full band 11 (9) 3.0 167 17 CRA40-67

406-512 Full band 9 (7) 0.5 x 0.8 64 69 CSA10-67-DIN

406-512 Full band 11 (9) 2.1 x 0.8 71 35 CSA20-67-DIN

406-512 Full band 13 (11) 3 x 0.8 60 17 CSA40-67-DIN

330-420 Full band 10 (8) 0.9 x 0.9 x 0.6 40 57 CR4-57

400-520 Full band 11 (9) 0.9 x 0.9 x 0.6 40 57 CR4-67

800-960 60 MHz 11 (9) 0.4 x 0.4 x 0.4 45 52 CR8

16


Collinear Antennas

Our extensive range of collinear antennas is available in frequency specific designs

suitable for both simplex and duplex applications and in addition feature our

innovative broadband low PIM patented corporate feed antennas and PCB

based Meander™ technology.

17


COL45 E Plane COL45 Typical VSWR Response( )

460 464 468 472 476 480 484 488 492 496 500

Operating Bandwidth

Frequency MHz Gain dBi (dBd) Bandwidth Length m Model

130-140 2 (0) Full band 2.2 COL51-140

140-150 2 (0) Full band 2.1 COL51-150

150-160 2 (0) Full band 2.2 COL51-160

156-166 2 (0) Full band 2.2 COL51-166

162-174 2 (0) Full band 2.1 COL51-174

130-140 6 (4) Full band 5.5 COL53-140

140-150 6 (4) Full band 5.0 COL53-150

150-160 6 (4) Full band 5.1 COL53-160

150-160 7 (5) Full band 6.5 COL54-160

156-166 7 (5) Full band 6.5 COL54-166

162-174 7 (5) Full band 6.0 COL54-174

380-400 2 (0) Full band 1.1 COL41-58

400-420 2 (0) Full band 1.1 COL41-65

450-470 2 (0) Full band 1.1 COL41-70

470-490 2 (0) Full band 1.1 COL41-71

490-520 2 (0) Full band 1.1 COL41-72

380-400 6.2 (4) Full band 2.2 COL43-58

400-420 6.2 (4) Full band 2.0 COL43-65

450-470 6.2 (4) Full band 1.9 COL43-70

470-490 6.2 (4) Full band 1.8 COL43-71

450-470 6.2 (4) Full band 1.7 COL43-72

380-400 8 (6) Full band 3.4 COL45-58

400-420 8 (6) Full band 3.1 COL45-65

450-470 8 (6) Full band 2.8 COL45-70

470-490 8 (6) Full band 2.7 COL45-71

490-520 8 (6) Full band 2.6 COL45-72

• UniquepatentedPCBcircuitforexcellentbroadbandcharacteristics

• Exceptionalpatternstabilityacrosstheentireband

• IndustryleadinglowPIMcharacteristics-150dBc

• Lightweight-idealwhentowerloadingisaconcern

• Suppliedpre-tunedinavastrangeofbands• DCgroundedforlightningprotectionandthe

reductionofprecipitationstaticnoise

Special Features

130-2170 MHzLow PIM Meander™ DesignCollinear Antennas

CO

L54

CO

L45

CO

L85

18


Low PIM Meander™ Design continued


380-400 10 (8) Full band 6.2 COL410-58

400-420 10 (8) Full band 5.9 COL410-65

450-470 10 (8) Full band 5.4 COL410-70

470-490 10 (8) Full band 5.2 COL410-71

490-520 10 (8) Full band 4.9 COL410-72

746-806 2 (0) Full band 1.1 COL81-806

806-870 2 (0) Full band 1.1 COL81-870

850-930 2 (0) Full band 1.1 COL81-930

746-806 7 (5) Full band 1.7 COL84-806

806-870 6 (4) Full band 1.6 COL84-870

850-930 7 (5) Full band 1.6 COL84-930

746-806 9 (7) Full band 2.0 COL85-806

806-870 9 (7) Full band 1.9 COL85-870

850-930 9 (7) Full band 1.8 COL85-930

746-806 11 (9) Full band 3.6 COL811-806

806-870 10 (8) Full band 3.4 COL811-870

850-930 10 (8) Full band 3.2 COL811-930

824-2170 5 (3) @ 890MHz; 3 (1) @2100MHz Multiband 0.7 COL2194



19


• LowwindandtowerloadingDCgroundedforlightningprotectionandthereductionofprecipitationstaticnoise

• Modelsavailableinheavydutyconstructionwithheavydutyblackradome-aidinginiceshedding

• Modelsavailablewithstainlesssteelmountingsectionsforcorrosiveenvironments

• Frequencyspecificmodelsavailableforbothsimplexandduplexapplications

Manufactured to Frequency Designs

COL23 E Plane COL23 Typical VSWR Response

( )340 342 344 346 348 350 352 354 356 358 360

Operating Bandwidth

Frequency MHz

Gain dBi (dBd)

Bandwidth Lengthm

Description Model

70-88 5 (3) 3.0% 5.9 Duplex operation - Ruggedised black radome for ice shedding COL1

67-88 5 (3) 3.0% 5.8 Duplex operation COL16

88-115 5 (3) 1.0% 4.8 Simplex operation (narrowband) COL22

115-148 5 (3) 4.0% 3.8 Dulpex operation COL28




148-175 5 (3) 4.0% 2.9Duplex operation - Ultra heavy duty black radome for ice shedding &

galvanised mounting tubeCOL35


144-175 7 (5) 4.0% 4.4Duplex operation - Stainless steel mounting tube for corrosive environ-

mentsCOL24


148-175 7 (5) 4.0% 4.6Duplex operation - Ultra heavy duty black radome for ice shedding &




300-390 8 (6) 4.0% 3.7 COL23 supplied with 1m RG213 Cable Tail with N (female) connector COL23-T1



380-530 8 (6) 10MHz 3.1 Duplex operation COL8

380-530 8 (6) 10MHz 3.0 Duplex operation - Ruggedised black radome for ice shedding COL12

380-530 8 (6) 10MHz 3.0Duplex operation - Ultra heavy duty black radome for ice shedding &


600-1000 5 (3)5% @ <800MHz9% @ >800MHz

1.5 Duplex operation - Stainless steel mounting tube COL903

600-1000 8 (6)5% @ <800MHz9% @ >800MHz

2.2 Duplex operation - Stainless steel mounting tube COL906

CO

L8

Special Features

67-1000 MHz

CO

L23

20


Special Features

• Exceptionalpatternstabilityacrosstheentireband

• IndustryleadinglowPIMcharacteristics-150dBc• DCgroundedforlightningprotectionandthe

reductionofprecipitationstaticnoise• Lightweightdipoleconstructionandlowcentreof

gravityminimisedtipdeflectionandsway

• Suppliedpre-tunedinavastrangeofbands• Lowwindandtowerloading-idealalternativeto

exposeddipolearrays• Modelsavailableasdualantennaswithseparate

feedsinonehousing

380-870 MHzLow PIM Corporate Collinear Design

CC807-06 E Plane CC807-06 Typical VSWR Response( )

730 745 760 775 790 805 820 835 850 865 880

Operating Bandwidth


380-420 7 (5) Full band 3.1 CC380-06

380-420 Dual Band 4.6 (2.5) Full band 3.8 CC380-33

450-520 7 (5) Full band 2.7 CC450-06

746-870 5 (3) Full band 1.3 CC807-03

746-870 8 (6) Full band 1.8 CC807-06*

746-870 10 (8) Full band 2.9 CC807-08*

746-870 13 (11) Full band 5.3 CC807-11*

*Available in tilt variations of 1, 3 & 5 degrees by adding, -T1, -T5. Can be mounted upright or invert.

22


Yagi Antennas

The RFI range of yagi antennas feature standard aluminium, ruggedised aluminium or stainless

steel construction to meet the needs of the most demanding applications. Ideal for point to point, short or long link applications, RFI yagi antennas

feature all welded construction for years of reliable service in a variety of environmental conditions.

23


VHF Yagi AntennasFrequency

MHzGain dBi

(dBd)Bandwidth Vertical

BWHorizontal BW F/B Ratio

dBDescription Model

70-100 5 (3) 6MHz 70 140 10 2 element Yagi with stainless steel fittings YL02

70-100 6 (4) 3MHz 60 105 up to 20~ 2 element Yagi with stainless steel fittings YL02D



100-250 5 (3) 12MHz 80 140 11 2 element Yagi with stainless steel fittings YH02

100-250 6 (4) 6MHz 70 130 up to 20~ 2 element Yagi with stainless steel fittings YH02D

100-250 8 (6) 9MHz 60 75 15 (typ.) 3 element Yagi with stainless steel fittings YH03




• Allweldedconstructionformaximumperformanceandreliability

• Highfronttobackratiotoreduceinterference• Modelsavailableinmarinegradestainlesssteel

forcorrosiveenvironments• Fullyfoldeddipoledrivenelementconstruction

formaximumreliability• Alodinedfinishprovidesanexcellentconductive

surfaceforearthing

• Availableascustomtunedorfullbandoperation• Canbeconfiguredinstacksorbaysforhigher

gainapplicationsusingPHandPHEphasingharnesses

• Anextensiverangeofphasingharnessesavailable

Special Features

70-600 MHz

Yagi Antennas

UHF Yagi Antennas300-600 5 (3) 5% 77 161 9 2 element Yagi - specify operating frequency YB02-99

350-600 8 (6) 5% 63 98 13 3 element Yagi - specify operating frequency YB03-99

400-600 11 (9) Full band 47 56 18 (typ.) 6 element Yagi - refer below for available bands YB6*^

350-600 11 (9) 5% 47 56 18 (typ.) 6 element Yagi - specify operating frequency YB6-99

400-470 11 (9) Full band 45 49-52 16-18 7 element Yagi - refer below for available bands YB7*

400-470 13 (11) Full band 36 39 18 10 element Yagi - refer below for available bands YB10*





*Specify the following suffix when ordering: -61 (450-480MHz), -62 (480-520MHz), -63 (480-500MHz), -65 (400-420MHz), -70 (450-470MHz), -71 (470-490MHz), -75 (580-600MHz), eg: YB6-62^Available in stainless steel construction for corrosive environments. Specify YBSS as the prefix eg: YBSS6-62~ The front to back ratio is dependant on mounting arrangements. When correctly mounted as per the supplied instructions, 18-20dB front to back ratio is achieved.

YB6-61 E Plane

( )440 445 450 455 460 465 470 475 480 485 490

Operating Bandwidth

YB6-61 Typical VSWR Response

24


Special Features

• Heavydutyboomandelementsblackpowdercoatedtoaidiniceshedding

• Highfronttobackratiotoreduceinterference• Allweldedconstructionformaximum

performanceandreliability

• CanbeconfiguredinstacksorbaysforhighergainapplicationsusingPHandPHEphasingharnesses.

• Ruggedisedconstructionforuseinextremeconditions

• Availableascustomtunedorfullbandoperation• Anextensiverangeofphasingharnesses

available

300-600 MHzRuggedised UHF Yagi Antennas

Frequency MHz

Gain dBi (dBd)

Bandwidth Vertical BW Horizontal BW F/B Ratio dB

Description Model

300-600 8 (6) 4% 62 90 15 3 element heavy duty Yagi - specify operating frequency

RDA3-99

400-600 11 (9) Full band 45 54 20 6 element heavy duty Yagi - refer below for available bands

RDA6*

330-600 11 (9) 4% 45 54 20 9 element heavy duty Yagi - specify operating frequency

RDA6-99

70-100 13 (11) 4MHz 41 46 18 9 element heavy duty Yagi - refer below for available bands

YL04

100-250 13 (11) 12MHz 41 46 18 9 element heavy duty Yagi - specify operating frequency

YH02

100-250 14 (12) 6MHz 35 36 20 16 element heavy duty Yagi - refer below for available bands

YH02D ^

100-250 14 (12) 9MHz 35 36 20 16 element heavy duty Yagi - specify operating frequency

YH03

*Specify the following suffix when ordering: -61 (450-480MHz), -62 (480-520MHz), -63 (480-500MHz), -65 (400-420MHz), -70 (450-470MHz), -71 (470-490MHz), -75 (580-600MHz), eg: RDA6-62^Available in stainless steel construction for corrosive environments.

( )480 484 488 492 496 500 504 508 512 516 520

Operating Bandwidth

RDA6-99 E Plane

RDA6-99 Typical Response VSWR

25


• Alodinedfinishprovidesandexcellentconductivesurfaceforearthing

• Allweldedconstructionformaximumperformanceandreliability

• Fullyfoldeddipoledrivenelementconstructionformaximumreliability

• NarrowbeamwidthsandhighF/Bratioeffectiveinreducinginterference

• Modelsavailableinmarinegradestainlesssteelforcorrosiveenvironments

• Anextensiverangeofphasingharnessesavailable

Special Features

806-1000 MHz800MHz Yagi Antennas

Frequency MHz

Gain dBi (dBd)

Bandwidth Vertical BW Horizontal BW F/B Ratio dB

Description Model

850-930 8 (6) Full band 64 100 14 3 element Yagi - refer below for available bands YB803-82^

540-1000 8 (6) 5% 65 103 14 3 element Yagi - specify operating frequency YB803-99^

806-960 11 (9) Full band 49 61 17-22 6 element Yagi - refer below for available bands YB806*^






850-930 19 (17) Full band 14 24 24 Dual 18 element Yagi YBA818-82

*Specify the following suffix when ordering: -81 (806-896MHz), -82 (850-930MHz), -94 (890-960MHz) eg: YB806-82^Available in stainless steel construction for corrosive environments. Specify YBS as the prefix eg: YBS806-82

( )875 885 895 905 915 925 935 945 955 965 975

Operating Bandwidth

YB806-94 E Plane

YB806-94 Typical Response VSWR

26


Wireless Broadband Antennas

The RFI range of wireless broadband antennas includes both ground plane independent omni-directional and

directional antenna designs. The range includes 2.4GHz, 5.8GHz and a suite of multiband cellular antennas operating from 800-2500MHz that can be used in a variety of systems

such as cellular coverage enhancement for in-building applications, M2M, LAN extensions

27


( )2.40 2.41 2.42 2.43 2.44 2.45 2.46 2.47 2.48 2.49 2.50

G

Operating Bandwidth

COL2408 E Plane COL2408 Typical VSWR Response

Frequency MHz Gain dBi (dBd) Description Model

2400-2500 5 (3) Stud mount with N-female on 300mm tail COL2402

2400-2500 6.6 (4.5) Integrated N-male connector CD2405



2400-2500 10.6 (8.5) Integrated N-male connector CD2409

2400-2500 12 (10) Stainless steel mounting tube & N-female on 300mm tail COL2410



Special Features

2400-5850 MHzCollinear AntennasWireless Broadband Antennas

• PatentedMeander™PCBantennadesignfortheultimateinpatternstability

• Groundplaneindependentdesign• Ruggedconstruction-suitableforcorrosive

environments

• Smallunobtrusiveformfactor• UVstablewhitehousing-idealforbothindoor

andoutdoorapplicationsincludingmarine• Modelsavailablewithspringbaseformobile

applications

CD

2405

28


• Supportsmultiplenetworksintheonehousing• ModelsavailablewithIP65construction-suitable

forindoorandoutdoorapplications• Suitableforuseonmetallicandnon-metallic

surfaces

• Modelsavailablewithhighimpactresistancehousingstopreventvandaldamage

• Discretedesignssuitableformodernofficeenvironments

Special Features

800-2500 MHzMultiband Antennas

Frequency MHz Gain dBi (dBd) Description Model

800-900, 1710-2200, 2400-2500

3.7 (1.6), 4 (2), 5.4 (3.3)

Ceiling mount with N-female DAS-M1

800-960, 1710-2500 4 (2), 5 (3) Ceiling stud mount with N-female DAS-M4

824-960, 1710-2170, 2400-2500

3.9 (1.8), 4 (2), 5.6 (3.5)

Stud mount with SMA-male on 1.25m tail

CSM900

824-960, 1710-2500 9 (7), 12 (10)Panel antenna with pole and wall

mountCPL824-2500-10SMA

Notes

The pulp for this paper is sourced from certified, well managed sustainable forests and is ECF (Elemental Chlorine Free).The mill is ISO 14001 accredited. It has been "Made Carbon Neutral" by CPI Paper

rfi.com.au

Base Station Antennas

Documents

Transcript of Base Station Antennas