Barton Engineering Brochure
-
Upload
imran-mughle-azam -
Category
Documents
-
view
197 -
download
4
Transcript of Barton Engineering Brochure
Engineering
Premium Quality Solutions for Cable Management
Protection - Steel Conduit (US Spec)and
BARTON EMT
BARTON IMC
BARTON RMC
BARTON RMC-P
Electrical Metallic Tubing
Intermediate Metal Conduit
Rigid Metal Conduit
UPVC Coated Rigid Metal Conduit
Genuine Barton
Genuine Quality
Genuine Reputation
Accept Nothing Less
BARTON EMT is the most cost effective premium
quality conduit solution where light weight and
maximum wire carrying capacity are important
factors in the electrical cable protection system.
BARTON EMT is manufactured to tight tolerances
on modern and efficient tube rolling mills to
consistently high standards.
BARTON steel conduit is easily installed, reused,
recycled and modified. It provides excellent
strength to weight and long lasting resistance
against corrosion in the most extreme of
applications.
BARTON products are backed by a fast, reliable
and comprehensive local service.
�
�
�
�
�
�
�
Outside Diameter Tolerance
Nom Trade Size up to 2” 0.005” ( 0.13mm)
Nom Trade Size ” 0.010” ( 0.25mm)
Nom Trade Size 3” 0.015” ( 0.38mm)
Length Tolerance 0.125” ( 6.35mm)
Max height of internal weld bead 0.3mm
+ +
+ +
+ +
+ +
2½
Nom Trade Size 3½ to 4” 0.020” ( 0.51mm)
Pre Galv zinc (alternative finishes upon request)
Both ends plain finish (no threads)
Couplers available separately
Master bundle information is nominal
+ +
Quality, Environment and Service Specifications
Ordering information
� Thin walled unthreaded ductile steel conduit tube
Manufactured from Pre Galvanised flat rolled high grade steel
Supplied in 10’ (3.05m) lengths without couplers
Connected using clamp-type fittings
Underwriters Laboratory UL797
American National Standard Institute ANSI C80.3
High wire carrying capacity, easy to bend and install
Excellent resistance to extreme temperatures and environments.
Does not burn or produce harmful gases.
�
�
�
�
�
�
�
�
EMT – sustainable Electrical Metallic TubingHigh capacity, lightweight steel conduit tube for optimal protection
�
�
�
�
�
�
Outside Diameter Tolerance
Nom Trade Size up to 1” 0.010” ( 0.25mm)
Nom Trade Size 1¼ to 2” 0.015” ( 0.38mm)
Nom Trade Size 2½ to 4” 0.020” ( 0.51mm)
Length Tolerance 0.125” ( 6.35mm)
Max height of internal weld bead 0.3mm
HDG (alternative finishes upon request)
Both ends with NPT threads, one end
fitted with a coupler, the other with a plastic
protection cap.
Master bundle information is nominal
+ +
+ +
+ +
+ +
BARTON IMC is a cost effective premium quality
alternative to BARTON EMT and RMC where a balance
between weight and strength is a key design factor.
BARTON IMC is manufactured to tight tolerances on
modern and efficient tube mills. It is hot dipped
galvanised (bore and outside diameter) after
manufacturing for maximum resistance against
corrosion.
BARTON steel conduit can be recycled, reused,
modified and installed with ease. Steel has excellent
strength to weight, superior fire resistance properties
and is durable in extreme environments
BARTON products are backed by a fast, reliable and
comprehensive local service.
�
�
�
�
�
�
�
�
�
Thin walled, high strength, threaded ductile steel conduit tube
Hot dipped galvanised after manufacture for maximum protection
Supplied in 10’ (3.05m) lengths fitted with coupler at one end
Connected using clamp-type and NPT threaded fittings
Underwriters Laboratory UL1242
American National Standard Institute ANSI C80.6
Excellent resistance to extreme temperatures and corrosive
environments.
Does not burn or produce harmful gases.
Alternative lengths are available on request
IMC – sustainable Intermediate Metal ConduitThin wall, highly corrosion resistant steel conduit for cable systems
Quality, Environment and Service Specifications
Ordering information
Quality, Environment and Service Specifications
BARTON RMC provides maximum strength and a wire
carrying capacity up to 6” dia.
BARTON RMC is produced to high standards and hot
dipped galvanised (bore and outside diameter) after
manufacturing for maximum resistance against
corrosion.
BARTON steel conduit is easily installed, modified,
reused & recycled. With excellent strength and superior
fire resistance properties, it performs in the most
demanding of applications.
BARTON products are backed by a fast, reliable and
comprehensive local service.
�
�
�
�
�
�
Outside Diameter Tolerance
Nom Trade Size up to 2” 0.015” ( 0.38mm)
Nom Trade Size 2 to 4” 0.025” ( 0.64mm)
Nom Trade Size 5 to 6” 1%
Length Tolerance 0.125” ( 6.35mm)
Internal bead is removed
HDG (alternative finishes upon request)
Both ends with NPT threads, one end fitted
with a coupler, the other with a plastic
protection cap.
Master bundle information is nominal
+ +
+ +
+
+ +
½
Ordering information
�
�
�
�
�
�
�
�
�
Thick walled, maximum strength threaded ductile steel conduit tube
Hot dipped galvanised after manufacture for maximum protection
Supplied in 10’ (3.05m) lengths complete with coupler one end
Connected using clamp-type and NPT threaded fittings
Underwriters Laboratory UL6
American National Standard Institute ANSI C80.1
Excellent resistance to extreme temperatures and corrosive
environments.
Does not burn or produce harmful gases.
Alternative lengths are available on request
RMC – sustainable Rigid Metal ConduitThick walled, highly corrosion resistant steel conduit for cable systems
BARTON PVC coated RMC provides the ultimate
levels of protection against corrosion, maximum
mechanical strength and an ultra high capacity (up
to 6” dia) steel conduit solution, suitable for use in
hazardous areas.
A Polyurethane (PU) interior coating and a PVC
external coating is applied to the hot dipped
galvanised BARTON RMC.
PVC coated RMC has all the advantages of steel
conduit and in addition protects conductors from
harsh corrosive attacks.
�
�
�
�
�
�
�
�
Outside Diameter Tolerance
Nom Trade Size up to 2” 0.015” ( 0.38mm)
Nom Trade Size 2 to 4” 0.025” ( 0.64mm)
Nom Trade Size 5 to 6” 1%
Length Tolerance 0.125” ( 6.35mm)
Internal bead is removed
HDG
Both ends with NPT threads and end plastic caps
Couplers available separately.
+ +
+ +
+
+ +
½
”
PVC external coating thickness 1 mm
PU internal coating 50
Quality and Service Specifications
�m
Ordering information
�
�
�
�
�
�
�
�
Thick walled, maximum strength threaded ductile steel conduit tube
Hot dipped galvanised after manufacture for maximum protection
with PVC external coating and PU internal coating
Supplied in 10’ (3.05m) lengths complete with coupler one end
Connected using clamp-type and NPT threaded fittings
Underwriters Laboratory UL6
American National Standard Institute ANSI C80.1
Designed to protect & route electrical wiring from aggressive
mechanical damage and corrosive attack.
Alternative lengths are available on request
RMC-P – UPVC Coated Rigid Metal ConduitThick walled, high strength conduit for highly corrosive applications
�
�
A full range of clamp-type and compression fittings
Fully compatible with Barton EMT Conduit Tube
Manufactured from steel,
with a zinc plated finish
Compression type
Set screw type
Used to join EMT conduit
to a box or enclosure
Compression type
Set screw type
Used to join two lengths
of EMT conduit
45 degree
90 degree
Used where the EMT
conduit run turns through
45 or 90 degrees.
Full saddle (twin hole fixing)
Half saddle (one hole fixing)
Used to install EMT
conduit lengths.
EMT Connector
EMT Coupling
EMT Elbow
EMT Saddle
BARTON EMT fittings
Nom Trade Size
EMT Fittings and accessories
Connector Coupling
mm Set Screw Compression Set Screw CompressionInch
½
¾
1
1¼
1½
2
2½
3
3½
4
16
20
27
35
41
53
63
78
91
103
E201050
E201075
E201100
E201125
E201150
E201200
E201250
E201300
E201350
E201400
E203050
E203075
E203100
E203125
E203150
E203200
E203250
E203300
E203350
E203400
E205050
E205075
E205100
E205125
E205150
E205200
E205250
E205300
E205350
E205400
E207050
E207075
E207100
E207125
E207150
E207200
E207250
E207300
E207350
E207400
EMT Fittings and accessories
Nom Trade Size
Elbow Saddle
Inch
½
¾
1
1¼
1½
2
2½
3
3½
4
mm
16
20
27
35
41
53
63
78
91
103
45 degree
E209050
E209075
E209100
E209125
E209150
E209200
E209250
E209300
E209350
E209400
90 degree
E211050
E211075
E211100
E211125
E211150
E211200
E211250
E211300
E211350
E211400
Half
E214050
E214075
E214100
E214125
E214150
E214200
E214250
E214300
E214350
E214400
Full
E216050
E216075
E216100
E216125
E216150
E216200
E216250
E216300
E216350
E216400
Accessories and fittings for use with
BARTON EMT Conduit Tube
Ordering information
The fittings shown on this page are a selection from the full range. Additional items available upon request.
�
�
A full range of NPT threaded fittings
Fully compatible with Barton IMC and RMC
BARTON IMC/RMC fittings
Nom Trade Size
IMC/RMC Fittings and accessories
Connector
Compression Compression 45 degree 90 degreeRigidmm
mm
Inch
Inch
16
20
27
35
41
53
63
78
91
½
¾
1
1¼
1½
2
2½
3
3½
4
5
6
103
129
155
16
20
27
35
41
53
63
½
¾
1
1¼
1½
2
2½
6 155
R203050
R203075
R203100
R203125
R203150
R203200
R203250
R203300
R203350
R203400
R203550
R203600
R207050
R207075
R207100
R207125
R207150
R207200
R207250
R207300
R207350
R207400
R207550
R207600
R209050
R209075
R209100
R209125
R209150
R209200
R209250
R209300
R209350
R209400
R209550
R209600
R211050
R2 07511
R211100
R211125
R211150
R211200
R211250
R211300
R211350
R211400
R211550
R211600
R205050
R205075
R205100
R205125
R205150
R205200
R205250
R205300
R205350
R205400
R205550
R205600
Nom Trade Size
IMC/RMC Fittings and accessories
Saddle Nipple Locknut Hanger
Coupling Elbow
Half
E214050
E214075
E214100
E214125
E214150
E214200
E214250
E214600
Full
R218050
R218075
R218100
R218125
R218150
R218200
R218250
R218600
Bushed
R220050
R2 07520
R220100
R220125
R220150
R220200
R220250
R220600
Rigid
R222050
R 075222
R222100
R222125
R222150
R222200
R222250
R222600
R224050
R 075224
R224100
R224125
R224150
R224200
R224250
R224600
E216050
E216075
E216100
E216125
E216150
E216200
E216250
783 E214300 R218300 R220300 R222300 R224300E216300
913½ E214350 R218350 R220350 R222350 R224350E216350
4 103 E214400 R218400 R220400 R222400 R224400E216400
5 129 E214550 R218550 R220550 R222550 R224550E216550
E216600
Manufactured from steel,
with a zinc plated finish
Compression type
Used to join a plain end of
IMC/RMC conduit to a box
or enclosure
Compression type
Threaded type
Used to join two lengths
of IMC/RMC.
45 degree
90 degree
Used where the IMC/RMC
conduit run turns through
45 or 90 degrees.
Full saddle (twin hole fixing)
Half saddle (one hole fixing)
Used to install IMC/RMC
conduit lengths.
A wide range of accessories
to allow swift installation
IMC/RMC Connector
IMC/RMC Coupling
IMC/RMC Elbow
IMC/RMC Saddle
IMC/RMC nipples, locknuts
and hangers
Ordering information
Accessories and fittings for use with
BARTON IMC and RMC conduit tube
The fittings shown on this page are a selection from the full range. Additional items available upon request.
Cable Management and Protection Conduit
(US specification)
Please contact us on:
Caparo (GCC)
Jebel Ali Free Zone
PO BOX 17241
Dubai. UAE
E:
T: +971 4 8831808
F: +971 4 8831638
W:
www.caparogcc.com
Popes Lane
Oldbury
West Midlands,
B69 4PF
W:
Barton Engineering
United Kingdom
www.caparo.com
Genuine Barton
Genuine Quality
Genuine Reputation
Accept Nothing Less
From its base in the West Midlands, England, BARTON Engineering has successfully supplied premium qualify
cable management products for over 90 years and the market leading range has established an excellent
reputation for providing the highest levels of quality and value.
The BARTON range includes BS4568/50086/61386 conduit tube and accessories, flexible conduit, trunking,
cable tray, switch and socket boxes and electrical enclosures (in galvanised and stainless steel). BARTON
products are installed in the most demanding of applications and environments including airports, schools,
malls, hospitals, tunnels, stadiums, tall and super tall buildings, hotels and places of worship.
BARTON Engineering is part of the Caparo Group, a global association of manufacturing and engineering
businesses founded in 1968 by Lord Paul of Marylebone. Caparo interests include the design, manufacture
and marketing of steel, automotive and general engineering products, including materials testing. The Caparo
Group is wholly owned and controlled by the Paul family from its headquarters in London, UK.
Please visit www.caparo.com
Established in 2005 in the Jebel Ali Free Zone, Caparo (GCC) is the exclusive BARTON service agent throughout
the Middle East and North Africa region. A highly focussed service centre in Jebel Ali provides customers with
stock, logistics, technical and sales support for the entire BARTON range. All orders, transactions and product
information is provided in good faith and is subject to our Terms of Trading, which may be obtained upon
request.