Barmat Features. - Building Possibilities - Liberty OneSteel Machine Specifications Bar diameter...

Barmat ™ Machine Specifications Bar diameter Class N10, N12, N16 Wire diameter Ribbed Wire: 7 mm, 8 mm, 9 mm Sheet width 0.5 m – 4 m Sheet length 1 m – 12 m Minimum overhang 25 mm Smallest bar centres 25 mm For your local OneSteel Reinforcing branch contact: National 02 8424 9800 ACT 02 6203 0200 QLD 07 3845 5655 New South Wales 02 9794 1000 Northern Territory 08 8947 0330 South Australia 08 8349 8666 Tasmania 03 6273 0300 Victoria 03 9207 2200 Western Australia 08 6332 3111 reinforcing.com This information is provided as a service to those interested in steel reinforcement. Since the information is provided for general guidance only, and in no way replaces the services of professional consultants on particular projects or subjects, no legal liability can be accepted by OneSteel Reinforcing Pty Limited for its use. Not all products are available in all locations. We reserve the right to amend specifications without notice. BARMAT ® is a trademark authorised for use by OneSteel Reinforcing Pty Limited ABN 22 004 148 289. *OneSteel Reinforcing REBAR and REOMESH ® products are independently certified by ACRS the Australian Certification Authority for Reinforcing Steels to confirm compliance to Australian Standards. Barmat ™ Features . • Variety of shapes available including 3D designs • Significantly reduces steelfixing • Potential for reduced concrete • Tighter tolerances with offsite prefabrication • Reduces lapping • Less offcuts and wastage • Reduces congestion on site • Improves safety through less handling • No minimum order quantity for individual designs • Green Star ® Credit point (Offsite prefabrication) BARMAT TM Class N reinforcing bar mats allow steel to be prefabricated with variable spacing in a variety of shapes. Suitable for a variety of applications including in-situ parapets, road shoulders, bridge decks, suspended floors, culvert bases, precast walls and barriers. Combined with OneSteel Reinforcing’s design assistance, the BARMAT TM solution enables faster installation which can reduce on-site labour, steel fixing costs and also contribute to Green Star ® steel credit points for off site prefabrication.

Upload
lamtu
Category

Documents
view
222
download
1

Embed Size (px):

Transcript of Barmat Features. - Building Possibilities - Liberty OneSteel Machine Specifications Bar diameter...

Barmat™ Machine Specifications

Bar diameter Class N10, N12, N16

Wire diameter Ribbed Wire: 7 mm, 8 mm, 9 mm

Sheet width 0.5 m – 4 m

Sheet length 1 m – 12 m

Minimum overhang 25 mm

Smallest bar centres 25 mm

For your local OneSteel Reinforcing branch contact:

National 02 8424 9800ACT 02 6203 0200QLD 07 3845 5655

New South Wales 02 9794 1000Northern Territory 08 8947 0330South Australia 08 8349 8666

Tasmania 03 6273 0300Victoria 03 9207 2200Western Australia 08 6332 3111

reinforcing.com

This information is provided as a service to those interested in steel reinforcement. Since the information is provided for general guidance only, and in no way replaces the services of professional consultants on particular projects or subjects, no legal liability can be accepted by OneSteel Reinforcing Pty Limited for its use. Not all products are available in all locations. We reserve the right to amend specifications without notice. BARMAT® is a trademark authorised for use by OneSteel Reinforcing Pty Limited ABN 22 004 148 289. *OneSteel Reinforcing REBAR and REOMESH® products are independently certified by ACRS the Australian Certification Authority for Reinforcing Steels to confirm compliance to Australian Standards.

Barmat™ Features.

• Variety of shapes available including 3D designs

• Significantly reduces steelfixing

• Potential for reduced concrete

• Tighter tolerances with offsite prefabrication

• Reduces lapping

• Less offcuts and wastage

• Reduces congestion on site

• Improves safety through less handling

• No minimum order quantity for individual designs

• Green Star® Credit point (Offsite prefabrication)

BARMATTM Class N reinforcing bar mats allow steel to be prefabricated with variable spacing in a variety of shapes. Suitable for a variety of applications including in-situ parapets, road shoulders, bridge decks, suspended floors, culvert bases, precast walls and barriers. Combined with OneSteel Reinforcing’s design assistance, the BARMATTM solution enables faster installation which can reduce on-site labour, steel fixing costs and also contribute to Green Star® steel credit points for off site prefabrication.