Barcol - Elastocon AB · 2019. 7. 5. · DIN EN 59, ASTM D 2583 Produktinformation / Product...
Transcript of Barcol - Elastocon AB · 2019. 7. 5. · DIN EN 59, ASTM D 2583 Produktinformation / Product...
Barcol
PROD
UCT
INFO
RMAT
ION
®
testing solutions since 1954
Software Hardtest für WindowsMessdatenerfassung- und Analysesystem
NormenDIN EN 59, ASTM D 2583
Produktinformation / Product Information
Barcol
Anwendungsbereich Härteermittlung an glasfaserverstärkten Kunststoffen, Duroplasten, harten Thermoplasten, Aluminium usw.Mindestmaterialstärke 1,5 mm
Barcol
Range of applicationHardness determination on fiberglass rein-forced plastics, thermoset material, hard thermoplastic resin, aluminium etc.minimum material thickness 1,5 mm
Official DAkkS / DKD-Calibration Certificate
Barcol-test standTest stand for the instruments
Barcol-Prüfständerzur Aufnahme des Messgerätes
Grundausstattung Barcol, Stabilisierungsring
Basic equipmentBarcol, Stabilisation ring
StandardsDIN EN 59, ASTM D 2583
Amtlicher DAkkS / DKD-Kalibrierschein
Software Hardtest for WindowsSystem for data logging and analysis
Referenzblockmit amtlichem DAkkS / DKD Kalibrierschein
Standard rubber blockincl. officially DAkkS / DKD Calibration Certificate
Heinrich Bareiss Prüfgerätebau GmbHDAkkS / DKD-KalibrierlaboratoriumBreiteweg 1 | 89610 [email protected] | www.bareiss.deTelefon: +49 (0) 7305 / 96 42-0Telefax: +49 (0) 7305 / 96 42-22
05 /
2017
Technische DatenMesswertspeicher für 300 MesswerteStromversorgung über Lithium-Batterie 3,6 VBetriebsdauer ca. 2000 StundenDatenausgang RS 232Abmessung: LxBxH 190 x 70 x 40 mmGewicht 600 g
Technical DataMemory for 300 measured valuesLithium battery 3.6V with approx. 2000 hours operating timeData output RS 232Measurement: LxWxH 190 x 70 x 40 mm Weight 600 g
®
testing solutions since 1954
Messprinzip Der Eindringkörper dringt mit einer Kraft in die Oberfläche des Prüflings ein.Die Eindrucktiefe gibt Auskunft über die vorhandeneHärte des Prüflings.
Measuring principleThe indenter of the instrument penetrates the specimen from the surface. This indentation depth provides the hardness information ofthe test specimen.