Ballistic Release Tool - global-uploads.webflow.com · and perf applications. In today’s diverse...
1
For more information contact AYRA ROACH P: 682.351.0437 E: [email protected] © Canatex Completions Solutions Inc. All Rights Reserved The Ballistic Release Tool, BRT, from Canatex is designed for ballistic operations in horizontal wells, specifically plug and perf applications. In today’s diverse horizontal well designs, the wireline deployed BRT allows for stronger weak points to prevent pumping-off bottom hole assemblies, BHA’s, while maintaining the ability to release from the BHA should it become stuck downhole. BRT Ballistic Release Tool Specifications O.D. SIZES AVAILABLE 2.75", 2.875", 3.125" MAXIMUM PULLING CAPABILITIES 42,000 LBS MAXIMUM EXTERNAL PRESSURE RATING 20,000 PSI TOP CONNECTION EXTERNAL 1-5/8-6 TPI. ACME (PIN UP) BOTTOM CONNECTION INTERNAL 1-5/8-6 TPI. ACME (BOX END) FISHING NECK EXTERNAL 1-3/4” SEALS VITON 90 DUROMETER METAL COMPOSITION 4340 NICKEL- CHROMIUM- MOLYBDENUM ALLOY STEEL Applications Plug and perf operations Running tools in Horizontal wells with high dogleg severity Running tools in wells with casing deformation increasing risk of becoming stuck Features Allows stronger weakpoint to be used Fail safe to protect against accidental release Can be run multiple times with minimal maintenance 20,000psi pressure rating EXTERNAL 1 5/8 - 6 ACME 28.70 INTERNAL 1 5/8 - 6 ACME DCN: CX17006.X06
Transcript of Ballistic Release Tool - global-uploads.webflow.com · and perf applications. In today’s diverse...
For more information contact AYRA ROACH P: 682.351.0437 E: [email protected] © Canatex Completions Solutions Inc. All Rights Reserved
The Ballistic Release Tool, BRT, from Canatex is designed for ballistic operations in horizontal wells, specifi cally plug and perf applications. In today’s diverse horizontal well designs, the wireline deployed BRT allows for stronger weak points to prevent pumping-off bottom hole assemblies, BHA’s, while maintaining the ability to release from the BHA should it become stuck downhole.
BRTBallistic Release Tool
Specifi cations
O.D. SIZES AVAILABLE
2.75", 2.875", 3.125"
MAXIMUM PULLING
CAPABILITIES
42,000 LBS
MAXIMUM EXTERNAL
PRESSURE RATING
20,000 PSI
TOP CONNECTION
EXTERNAL
1-5/8-6 TPI.
ACME (PIN UP)
BOTTOM CONNECTION
INTERNAL
1-5/8-6 TPI.
ACME (BOX END)
FISHING NECK
EXTERNAL
1-3/4”
SEALS
VITON 90
DUROMETER
METAL COMPOSITION
4340 NICKEL-
CHROMIUM-
MOLYBDENUM
ALLOY STEEL
Applications
Plug and perf
operations
Running tools in
Horizontal wells
with high
dogleg severity
Running tools in
wells with casing
deformation
increasing risk of
becoming stuck
Features
Allows stronger
weakpoint
to be used
Fail safe to protect
against accidental
release
Can be run multiple
times with minimal
maintenance
20,000psi
pressure rating
EXTERNAL1 5/8 - 6 ACME
28.70
INTERNAL1 5/8 - 6 ACME
DCN: CX17006.X06
