Ball Valves - processandsteam.comprocessandsteam.com/PSSpdfs/Flow+BallValveBrochure2012.pdf- NACE...

Ball Valves

Quality Valves at Low Cost

B Series 1, 2, 3 PC Ball Valves Part Numbering System ...............................3 B01: 2 PC, 1000 WOG, 316SS ...................................................................................... 4 B02: 2 PC, 2000/1500 WOG, 316SS ............................................................................. 4 B03: 2 PC, 1000 WOG, 316SS Direct Mount ................................................................. 5 B04: 3 PC, 1000 WOG, 316SS, Screwed Ends ............................................................. 5 B04S: 3 PC, 1000 WOG, 316SS, Socket Weld Ends ....................................................... 5 B05: 3 PC, 1000 WOG, 316SS, Direct Mount, Screwed Ends ....................................... 6 B05S: 3 PC, 1000 WOG, 316SS, Direct Mount, Socket Weld Ends ................................ 6 B05TC: 3 PC, 1000 WOG,316SS, Direct Mount, Tri-Clamp Ends ...................................... 6 B05TO: 3 PC, 1000 WOG, 316SS, Direct Mount, Tube-Ends ............................................ 7 B06: 1 PC, 2000 PSI, Carbon Steel/Barstock ................................................................ 7 B07L: 3 PC, 1000 WOG, 316SS, 3 way, L port ................................................................ 8 B07T: 3 PC, 1000 WOG, 316SS, 3 way, T-port ................................................................ 8 B11: 2 PC, 2000/1500 WOG, Carbon Steel ................................................................... 8 BT3/BT6: 3 PC, 3000/6000 PSI, Carbon Steel ...................................................................... 9

Z Series Floating Flanged Ball Valves Part Numbering System .................. 10 Z Series Pressure & Temperature Charts ................................................................................ 10 150# RF Flanged ZF1 Full Port Direct Mount SS ............................................................................... 11 ZF1 Full Port Carbon Steel & Low Temp ................................................................ 12 ZR1 Reg Port Carbon Steel & Low Temp .............................................................. 13 300# RF Flanged ZF3 Full Port Carbon Steel, Low Temp & SS ......................................................... 14 ZR3 Reg Port Carbon Steel & Low Temp .............................................................. 15 600# RF Flanged ZF6 Full Port Carbon Steel & Low Temp ................................................................ 16 ZR6 Reg Port Carbon Steel & Low Temp .............................................................. 17

T Series Flanged Trunnion Ball Valves Part Numbering System ................ 18 T Series Pressure & Temperature Charts ................................................................................. 18 TSeriesTrunnionBallValvesFeatures&Specifications ........................................................ 19 T Series General Dimensionsional Chart ................................................................................. 20

Additional Information Automation ............................................................................................................................... 22 Terms and Conditions .............................................................................................................. 24

Table of Contents

SizesandSpecificationsshownaresubjecttochangewithoutnotice.


1 = Valve Size02 = 1/4”03 = 3/8”05 = 1/2”07 = 3/4”10 = 1”12 = 1-1/4”15 = 1-1/2”20 = 2”25 = 2-1/2”30 = 3”40 = 4”

2 = Valve SeriesB01: 2 PC, 1000 WOG, 316SS B02: 2 PC, 2000/1500 WOG, 316SS B03: 2 PC, 1000 WOG, 316SS Direct Mount B04: 3 PC, 1000 WOG, 316SS, Screwed EndsB04S: 3 PC, 1000 WOG, 316SS, Socket Weld Ends B05: 3 PC, 1000 WOG, 316SS, Direct Mount, Screwed Ends B05S: 3 PC, 1000 WOG, 316SS, Direct Mount, Socket Weld Ends B05TC: 3 PC, 1000 WOG,316SS, Direct Mount, Tri-Clamp Ends B05TO: 3 PC, 1000 WOG, 316SS, Direct Mount, Tube-Ends B06: 1 PC, 2000 PSI, Carbon Steel/Barstock B07L: 3 PC, 1000 WOG, 316SS, 3 way, L port B07T: 3 PC, 1000 WOG, 316SS, 3 way, T-port B11: 2 PC, 2000/1500 WOG, Carbon Steel BT3/BT6: 3 PC, 3000/6000 PSI, Carbon Steel

1 2

B Series 1, 2, 3 PC Ball Valve Part Numbering System

Pressure rating: - 1000 psi (69 Bar)

WOG for 1/4” to 2”Features:- Investment Cast Body & End- Blow-out proof stem- Full Port- FNPT threaded on both ends- Material: ASTM A351-CF8M- NACE MR0175- Locking Handle


Pressure rating: - 2000 psi (137.8 Bar) WOG

for 1/4” to 2” - 1500 psi (89.6 Bar) WOG for 3”Features:

- Investment Cast Body and Ends- Blow-out proof stem / Full Port- FNPT threaded on both ends- Locking Handle- Material: ASTM A351-CF8M- NACE MR0175*Note: available in Carbon Steel as model B11 on page 8

2-PC Full Port SS 2000 PSI Ball Valve B02

2-PC Full Port SS 1000 PSI Ball Valve B01

No

01

02

03

04

05

06

07

08

09

10

11

12

13

14

No

01

02

03

04

05

06

07

08

09

10

11

12

13

14

Qty

1

1

1

2

1

1

1

2

1

1

1

1

1

1

Qty

1

1

1

2

1

1

1

2

1

1

1

1

1

1

Parts

Body

End

Ball

Ball Seat

Joint Gasket

Stem

Thrust Washer

Stem Packing

Gland Nut

Handle

Spring Washer

Stem Nut

Handle Sleeve

Lock Device

Parts

Body

End

Ball

Ball Seat

Joint Gasket

Stem

Thrust Washer

Stem Packing

Gland Nut

Handle

Spring Washer

Stem Nut

Handle Sleeve

Lock Device

Material

ASTM-CF8M-A351

ASTM-CF8M-A351

ASTM-CF8M-A351

15% R-PTFE

PTFE

AISI 316

PTFE

PTFE

AISI 304

AISI 304

AISI 304

AISI 304

Vinyl Grip

AISI 430

Material

ASTM-CF8M-A351

ASTM-CF8M-A351

ASTM-CF8M-A351

15% R-PTFE

PTFE

AISI 316

PTFE

PTFE

AISI 304

AISI 304

AISI 304

AISI 304

Vinyl Grip

AISI 304

Size

1/4”

3/8”

1/2”

3/4”

1”

1-1/4”

1-1/2”

2”

35

35

47

64

90

117

156

217

7

7

15

45

65

125

175

380

0.21

0.22

0.29

0.42

0.71

1.06

1.68

2.71

L

50

50

60

65

80

92

105

125

H

48

48

52

61

65

79

83

97

W

91

91

91

111

111

154

154

192

S

16.5

16.5

16.5

20

23.5

23.5

25.5

25.5

S1

10.2

10.2

10.2

13.5

16

16

17

17

X

5

5

5

6.5

8

8

9

9

N

12.5

12.5

12.5

21

22.5

23.5

23.5

23.5

P

28.5

28.5

28.5

34.8

34.8

38.1

38.1

38.1

BL

5/16”

5/16”

5/16”

3/8”

7/16”

7/16”

1/2”

1/2”

11.6

12.5

15

20

25

32

38

50

dia(mm)

Torque(in-lbs)

CVFactor

WtKwg

1/4”

3/8”

1/2”

3/4”

1”

1-1/4”

1-1/2”

2”

3”

Size dia(mm) L H X BL CV

FactorTorque

in-lbWtKgW

11.6

12.7

15

20

25

32

38

50

80

44.5

44.5

57

65

76

87.5

102

123

184

51

51

53

59.5

73

79

90.5

98.8

142.5

95

95

95

10

135

135

165

165

215

5

5

5

6.5

8

8

9

9

12

5/16”

5/16”

5/16”

3/8”

7/16”

7/16”

1/2”

1/2”

3/4”

6.6

7.9

11.2

21

35

57

80

148

415

35

35

47

64

90

117

156

217

651

0.194

0.205

0.285

0.456

0.764

1.163

1.870

3.126

9.79

Pressure rating: - 1000 psi (69 Bar) WOG for 1/4” to 2”Features:- Investment Cast Body and Ends- Blow-out proof stem / Full port- Direct Mounting Pad for ISO Std 5211- FNPT threaded on both ends- Material: ASTM A351-CF8M (316SS)- NACE MR0175

* See Page 22 for Actuation


2-PC Full Port SS Ball Valve - Direct Mount* B03

Pressure rating: - 1000 psi (69 Bar) WOG for 1/4” to 4”Features:- Investment Cast Body & Ends - Blow-out proof stem- Full port- FNPT threaded on both ends for B04- Socket Weld on both ends for B04S- Locking Handle- Material: ASTM A351-CF8M (316SS)

3-PC Full Port SS 1000 PSI Ball Valve B04/B04S

No

01

02

03

04

05

06

07

08

09

10

11

12

13

14

15

16

17

Parts

Body

Ends

Ball

Stem

Ball Seat

Gasket

Stem Packing

Thrust Washer

Stem Packing

Belleville Washer

Thrust Washer

O-Ring

Locking Washer

Stem Nut

Handle

Handle Nut

Handle Cover

Material

ASTM-A351 Gr. CF8M

ASTM-A351 Gr. CF8M

ASTM-A351 Gr. CF8M

316SS

15% RTFE

15% RTFE

15% RTFE

15% RTFE

304SS

SUS 304-USP

PTFE + 25% Carbon

Viton

304SS

304SS

304SS

304SS

Vinyl Grip

1/2”

3/4”

1”

1-1/2”

2”

Size Torquein-lbsISO 5211dia

(mm) L F M D H D1 S A Cv WtKg

15

20

25

38

50

65.3

77.3

88.7

109

125.3

6

7.5

7.5

7.5

9.5

85

110

180

315

450

9

9

11

14

14

72.85

81.8

90.45

114.7

124.0

112

112

136

197.9

197.9

8.5

8.5

11.4

14

13.7

36.95

45

53.45

74.75

83.5

15

45

65

175

380

0.46

0.81

0.96

2.3

2.3

7.5

9.5

9.5

9.5

11

42F0450

F0550

F0550

F0570

F07

50F0570

F0770

F0770

F07102F10

No

01

02

03

04

05

06

07

08

09

10

11

12

13

14

15

16

17

Qty

1

1

1

2

1

1

1

2

1

1

1

1

1

1

4-6

4-12

4-12

Parts

Body

End

Ball

Ball Seat

Joint Gasket

Stem

Thrust Washer

Stem Packing

Gland Nut

Handle

Stem Washer

Stem Nut

Handle Sleeve

Lock Device

Bolt

Spring Washer

Hex Nut

Material

ASTM-CF8M-A351

ASTM-CF8M-A351

ASTM-CF8M-A351

15% RTFE

15% RTFE

AISI 316

PTFE

PTFE

AISI 304

AISI 304

AISI 304

AISI 304

Vinyl Grip

AISI 304

AISI 304

AISI 304

AISI 304

1/4”3/8”1/2”3/4”1”

1-1/4”1-1/2”

2”2-1/2”

3”4”

Size L H W B D S CvFactor

WtKg

dia(mm)11.612.71520253238506580

100

5454

61.571

83.597

110.5129

171.5200252

515155

58.573

78.590.599127136172

848484110135135165165215215325

1212.515.820.926.635.0540.952.56982106

18182228344450

61.57690115

14.117.621.727.233.942.648.761.176.989.8115.4

10102650681201703605109001250

0.340.340.460.621.961.49

23.126.510.420.2


Pressure rating: - 1000 psi (69 Bar) WOG for 1/4” to 4”High Cycle, Live Loaded, Triple Stem Seal comprising of:- Carbon Filled PTFE Wedge Ring Thrust Washer and Viton O-Ring- 15% RTFE Chevron packing- Live loaded Belleville Washers- Packing Nut Mechanically Locked to StemFeatures:- Investment Cast Body & Ends - Blow-out proof stem - Full port- Direct Mounting Pad for ISO Std 5211- FNPT threaded on both ends on B05- Socket weld ends on B05S- Material: ASTM A351-CF8M (316SS) and 316LSS ends on Socket Weld

* See Page 22 for Actuation

3-PC Full Port SS Ball Valve - Direct Mount* B05* Threaded (B05), Socket Weld (B05S), and Tri-Clamp (B05TC) ends

B05/B05S

B05TC

No

01

02

03

04

05

06

07

08

09

10

11

12

13

14

15

16

17

18

19

20

21

Qty

1

2

1

1

2

1

1

1

1

1

4-6

4-6

4-6

1

1

1

1

1

1

1

1

Parts

Body

Ends

Ball

Stem

Seat

Stem Packing

Washer

Thrust Washer

Belleville Washer

Stem Nut

Bolts

Spring Washer

Bolts Nuts

Stem Ring

O-Ring

Stopper Washer

Square

Handle

Handle Nut

Stopper Pin

Handle Sleeve

Material

ASTM-A351 Gr. CF8M

ASTM-A351 Gr. CF8M

ASTM-A351 Gr. CF8M

SS 316

15% RTFE

25% CTFE

SS 304

PTFE +25% Carbon

SUS 304-CSP

SS 304

SS 304

SS 304

SS 304

PTFE +25% Carbon

VITON

SS 304

SS 304

SS 304

SS 304

SS 304

Vinyl

1/2”

3/4”

1”

1-1/2”

2”

3”

4”

Size d L F M ISO 5211 Torquein-lbs D H D1 S A Cv Wt

Kg

15

20

25

38

50

80

100

63.5

72.5

81

108

121.5

190

225

6

7.5

7.5

7.5

9.5

11

11

7.5

9.5

9.5

9.5

11

14.3

14.3

42F0450

F0550

F0550

F0570

F07102F10102F10

50F0570

F0770

F0770

F07102F10125F12125F12

85

110

180

315

450

680

1190

9

9

11

14

14

17

22

72.95

80.8

90.45

115.25

124.0

208.5

216.7

112

112

136

197.9

197.9

264

325

8.5

8.5

11.4

14

13.7

18

23

36.95

45

53.45

74.75

83.5

118.25

153.75

26

50

68

170

360

900

1250

0.6

0.7

1.03

2.5

3.4

11.2

22

*CF3M for SW

Pressure rating: 2000 psi (138 Bar)Features:- NACE MR0175- Blow-out proof stem- FNPT threaded on both ends- Body material: ASTM A105N Carbon Steel


* See page 22 for Actuation

1-PC Reg Port Carbon Steel 2000 PSI Ball Valve B06

Pressure rating: - 1000 psi (69 Bar) - WOG for 1/2” to 4”High Cycle, Live Loaded, Triple Stem Seal comprising of:- Carbon Filled PTFE Wedge Ring Thrust Washer and Viton O-Ring- 15% RTFE Chevron packing- Live loaded Belleville Washers- Packing Nut Mechanically Locked to StemFeatures:- Investment Cast Body & Ends - Blow-out proof stem- Full port- Direct Mounting Pad for ISO Std 5211- Tube Ends- Material: ASTM A351-CF8M (316SS)

3-PC Full Port SS Ball Valve - Direct Mount* B05TONo

01

02

03

04

05

06

07

08

09

10

11

12

13

14

15

16

17

18

19

20

21

Parts

Body

Ends

Ball

Seat

Gasket

Thrust Packing

Stem Packing

Ring

Belleville Washer

Stem Nut

Lock Washer

Ring

Handle Nut

Stop Pin

Handle

Handle Sleeve

Stem

Spring Washer

Bolt Nut

Bolt

O-Ring

Material

AISI 304/316/316L

AISI 304/316/316L

AISI 304/316/316L

PTFE/TFM 1600

PTFE

PTFE

PTFE

AISI 304

AISI 304

AISI 304

AISI 304

AISI 304

AISI 304

AISI 304

AISI 304

Plastic

AISI 316

AISI 304

AISI 304

AISI 304

Viton

Torquein-lbs

ISO5211

diamm D L H M B1 B2 K D1 E D2 H1 A C1 C2 X A1 L1Size

Size A B C D E F Wt (kg) Cv

1/2”3/4”1”

1-1/2”2”

2-1/2”3”4”

1/4”3/8”1/2”3/4”1”

1-1/4”1-1/2”

2”

6179

108110122145148148

29.534.5636568

79.584

92.5

41.344

57.265.171

92.198.4114.3

57.29.012.515202532

21232935415557

73.5

24.126.433.340.347.263.465.784.7

0.210.220.290.420.711.061.682.71

1.53.55.71016254062

99111414171722

36364250507070102

4242507070102102125

99111414171722

25.425.450.450.463.877.691.0119.0

2626344343535356

1821252825354337

66688101012

6681010121214

9010014024048065011501400

15.520.629.039.042.048.048.734.0

42445251

58.5///

137147168186223

///

143143160187187310310400

12.719.125.438.250.863.576.2100.6

15202540506580

100

9.515.922.235.047.660.373.097.4

89101114140156197229241

37.047.057.278.286.2109.2117.7141.2

F03-F04

F03-F04

F04-F05

F05-F07

F05-F07

F07-F10

F07-F10

F10-F12

No

01

02

03

04

05

06

07

08

09

10

11

12

Parts

Body

Insert

Ball

Seat

Stem

Thrust Washer

Stem Seal

Handle

Handle Sleeve

Nut

Washer

Spring Washer

Material

A108

A108

AISI 316

PTFE+15% G/F

AISI316

PTFE

PTFE

AISI 304

Vinyl Grip

304 SS

WCB

304 SS

Pressure rating: 1000 psi (69 Bar) WOG for 1/4” to 2”

High Cycle, Live Loaded, Triple Stem Seal comprising of:

- Carbon Filled PTFE Wedge Ring Thrust Washer

- Viton O-Ring- 15% RTFE Chevron packing- Live loaded Belleville Washers- Packing Nut Mechanically Locked to StemFeatures:- Anti-static device- L-port & T-port- Blow-out proof stem- FNPT end connections- Locking Handle- Material: ASTM A351 GR.CF8M

(316SS)


Pressure rating: - 2000 psi (137.8 Bar) WOG

for 1/4” to 2” - 1500 psi (103.4 Bar) WOG

for 3”Features:- Blow-out proof stem- Full Port- FNPT threaded on both ends- Locking Handle- Carbon Steel Body and Ends- Material: ASTM A216-WCB- NACE MR0175*Note: available in Stainless Steel as

model B02 on page 4

3-way Reg. Port SS Ball Valve - Direct Mount* B07L/T

2-PC Full Port Carbon Steel Ball Valve B11

* See page 22 for ActuationNo

01

02

03

04

05

06

07

08

09

10

11

12

13

14

15

16

17

18

19

Parts

Body

Ends

Seat

Ball

Stem

Gasket

Thrust Washer

Stem Packing

Gland

Belleville Washer

Stem Nut

Handle

Handle Nut

End Cap

Gasket

Handle Sleeve

Locking Washer

Thrust Washer

O-Ring

Material

ASTM-A351 Gr. CF8M

ASTM-A351 Gr. CF8M

15% RTFE

ASTM-A351 Gr. CF8M

SS 316

15% RTFE

PTFE + 25% Carbon

15% RTFE

SS 304

SUS 304-CSP

SS 304

SS 304

SS 304

ASTM-A351 Gr. CF8m

15% RTFE

Vinyl Grip

SUS 304-CSP

PTFE + 25% Carbon

Viton1

234567

8

9101112

13

14

15

1617

18

19


Pressure rating: 3000 psi (BT3) / 6000 psi (BT6)Specifications:- Designed to ASME B16.34 - NPT & SW to ASME B16.11 - Tested to API 598 -API607firesafe -NACE MR0175 -CRN

Standard Features: - Available in full port & reg port- Forged Steel Body- Locking Lever - Blowout proof stem- Antistatic device- Mounting pad

3-PC Threaded Body 3000/6000 PSI Ball Valve BT3/BT6

* Denotes standard stock trim


150# & 300# 600#

Z Series Floating Flanged Ball Valves Part Numbering System

1 = Code & ClassZR1 = Reduced port class 150ZR3 = Reduced port class 300ZR6 = Reduced port class 600ZF1 = Full port class 150ZF3 = Full port class 300ZF6 = Full port class 600

2 = Size050 = 1/2”075 = 3/4”001 = 1”150 = 1-1/2”002 = 2”250 = 2-1/2”003 = 3”004 = 4”006 = 6”008 = 8”

3 = Type A = Floating ball split body B = Floating ball unibody4 = Body Material 1 = ASTM A216 WCB 2 = ASTM A352 LCC 3 = ASTM A351 CF8M 4 = A105N 5 = A350 LF2

5 = End Connection F=Raisedfaceflanged* R=Ringjointflangedends B = Butt-welded ends6 = Trim Material 1 = Body + 3ENC 2 = 304SS 3 = 316SS *7 = Seat material P = PTFE R = RTFE * N = Nylon K = PEEK D = Devlon

8 = Operator H = Handle/Lever G = Gear Operator B = Bare Stem9 = Special Requirements 00 = Standard Requirement

1 2 3 4 5 6 7 8 9

Z Series Pressure & Temperature Charts


Features:-Fullbore,2piecebodyfloatingball- ISO Mounting Pad, direct mounting to actuator- Blow-out proof stem- Cavity relieving seats, anti-static device- Lever operated

150# Full Port Direct Mount SS ZF1

Specifications:- Designed according to ASME/ANSI Class 150 - B16.34- Face to Face per ASME/ANSI B16.10 Long Pattern- Flanges designed per ASME/ANSI B16.5- NACE MR0175- Design Standard per API 608- Markings per MSS-SP25- Pressure Test per API 598

* See page 22 for Actuation


150# Full Port Carbon Steel & Low Temp ZF1

Features:-Fullbore,2piecebodyfloatingball- ISO Mounting Pad- Cavity relieving seats, anti-static device- Blow-out proof stem- Lever operated 2”-6”, Gear operated 8”

Specifications:- Fire-safe to API-607, latest Ed. - Designed to ASME/ANSI Class 150-B16.34- Face to Face to ASME/ANSI B16.10 Long Pattern- Flanges to ASME/ANSI B16.5- NACE MR0175- Design Standard per API 608- Markings per MSS-SP25- Pressure Test per API 598

GEAR

LEVER

Features:- Reduced bore, 1 piece unibody floatingball- ISO Mounting Pad- Blow-out proof stem- Cavity relieving seats, anti-static device- Lever operated


Specifications:- Fire-safe to API-607, latest Ed. - Designed to ASME/ANSI Class 150-B16.34- Face to Face to ASME/ANSI B16.10 Short Pattern - NACE MR0175- Design Standard per API 608- Markings per MSS-SP25- Pressure Test per API 598

150# Reg. Port Carbon Steel & Low Temp ZR1

O-Ring


Features:-Fullbore,2piecebodyfloatingball- ISO Mounting Pad- Blow-out proof stem- Cavity relieving seats, anti-static device- Lever operated 2”-6”, Gear operated 8”

Specifications:- Fire-safe to API-607, latest Ed. - Designed to ASME/ANSI Class 300-B16.34- Face to Face to ASME/ANSI B16.10 Long Pattern- Flanges designed per ASME/ANSI B16.5- NACE MR0175- Design Standard per API 608- Markings per MSS-SP25- Pressure Test per API 598

300# Full Port Carbon Steel, Low Temp & SS ZF3

LEVER

GEAR

Gland

Antistatic


Features:- Reduced bore, 1 piece unibody floatingball- ISO Mounting Pad- Blow-out proof stem- Cavity relieving seats, anti-static device- Lever operated

Specifications:- Fire-safe to API-607, latest Ed. - Designed according to ASME/ANSI Class 300 - B16.34- Face to Face per ASME/ANSI B16.10 Short Pattern- NACE MR0175- Design Standard per API 608- Markings per MSS-SP25- Pressure Test per API 598



Features:- Full bore, 2 piece split body floatingball- ISO Mounting Pad- Blow-out proof stem- Anti-static device- Lever operated

Specifications:- Fire-safe to API-607, latest Ed.- Designed to ASME/ANSI Class 600 - B16.34- Face to Face to ASME/ANSI B16.10 Long Pattern- Flanges to ASME/ANSI B16.5- NACE MR0175- Design Standard per API 608- Markings per MSS-SP25- Pressure Test per API 598

600# Full Port Carbon Steel & Low Temp ZF6

Antistatic

LEVER

GEAR


Features:- Reduced bore, 2 piece split body floatingball- ISO Mounting Pad- Blow-out proof stem- Anti-static device- Lever operated 2”-4”, Gear operated 6”

Specifications:- Fire-safe to API-607, latest Ed.- Designed to ASME/ANSI Class 600 - B16.34- Face to Face to ASME/ANSI B16.10 Long Pattern- Flanges to ASME/ANSI B16.5- NACE MR0175- Design Standard per API 608- Markings per MSS-SP25- Pressure Test per API 598


Antistatic


T Series Flanged Trunnion Ball Valve Part Numbering System

T Series Pressure & Temperature Charts

2 95 843 761

1 = Port & ClassTR1 = Reduced port class 150TR3 = Reduced port class 300TR6 = Reduced port class 600TR9 = Reduced port class 900TR15 = Reduced port class 1500TR25 = Reduced port class 2500TF1 = Full port class 150TF3 = Full port class 300TF6 = Full port class 600TF9 = Full port class 900TF15 = Full port class 1500TF25 = Full port class 2500

2 = Size002 = 2”003 = 3”004 = 4”006 = 6”008 = 8”010 = 10”012 = 12”014 = 14”016 = 16”018 = 18”020 = 20”024 = 24”026 = 26”028 = 28”030 = 30” 032 = 32”034 = 34”036 = 36”040 = 40”042 = 42”

3 = Type T = 3 Piece Split Body S = 2 Piece Split Body W = Welded Body4 = Body Material 1 = ASTM A216 WCB (-29C) 2 = ASTM A352 LCC (-46C) 3 = ASTM A351 CF8M (-196C) 4 = ASTM A105N (-29C) 5 = ASTM A350 LF2 (-46C) 6 = ASTM 182 F316 (-196C) 7 = DUPLEX 22CR5 = End Connection F = Flanged Raised Face J = Flanged RTJ B = Butt Weld End G = Weld X RF H = Weld X RTJ P = Weld W/PUPS X = GRAYLOC

6 = Trim Material 1 = Body + 3ENC 2 = 304SS 3 = 316SS 4 = 410SS 5 = DUPLEX 22CR7 = Seat Material P = PTFE R = RTFE N = Nylon K = PEEK D = Devlon M = Metal x Metal8 = Operator L = Handle/Lever G = Gear Operator B = Bare Stem C = Chain Wheel9 = Special Requirements 00 = Standard Requirement

Compliance and SpecificationsISO 14313:2007 / API 6DISO 9001-2008 Registered Quality System API 608 / API 598 Firesafe to API 607 ASME B16.34, B16.5, B16.10 CSA Z245.15 Steel Valves NACE MR0175 / ISO 15156 Compliance

FeaturesDesigns Available - Two piece cast design or three piece forged design available.Double Block & Bleed - Independent spring loaded upstream and downstream seats and body bleed ensure suitability for use in double block & bleed service. Antistatic Design - Antistatic design to ensure electrical continuity between stem, ball and body.Emergency Seat and Stem Seal Injection (varies on size) -Incaseofunforeseensealdamageorvalveleakagewhileinservice,injectionfacilitiesareavailableonthevalveswhenacriticalsealisdemandedand there is no time to service or shut down the facility. Automatic Body Cavity Relief - Trunnion Mounted Ball Valves are protected from thermal expansion and body cavity over pressurization due to spring loaded seats which automatically relieve pressure to the down stream side of the body cavity. In addition, all valves come with a manual safe relieving bleed valve. Seat Design -Theseatsarefreefloatingalongthevalveaxis.Atlowpressure,ballandseatsealingismaintainedbypre-loadedseatsprings.Highpressuresealingis maintained by the line pressure acting on the differential area of the seats.

•Other materials available upon request•Materials shown are general materials of construction for 2 piece or 3 piece

Trunnion Ball Valves•We reserve the right to substitute materials listed above with alternate approvedmaterialforspecificserviceconditions


T-Series Trunnion Ball Valves

* Standard Inventory Trim** Indicated parts included in Minor Repair Kit


T Series Trunnion General Dimensional Data


T Series General Trunnion Dimensional Data

* Actuator sized for liquid service up to 500 psig differential line pressure using 80 psig instrument air. ** Actuator sizing torques up to 500 psig DP, Water - 1.0, Oil - 0.8, Gas Wet (Steam) - 1.0, Gas Dry - 1.3.*** Add 20% on torque values for 3-way B07 series valve.**** For high or low temperature applications consult supplier for special seal kits.


For ISO Direct mount Ball Valves Only (B03, B05/5S/5TC/5T0, B07L/T & ZF1 SS Only)*

Actuation Selection Chart


SPNII Actuator Information

Your local Sales Representative:

Contact Information

Flow+ Ball Valve Brochure 08/2012

Limited Warranty

ValvSource Equipment Limited (herein refered to as “ValvSource”) is pleased to advise its customers (“Purchaser”) of Flow+ brand products (“Product” or “Products”) that the manufacturer (“Manufacturer”) warrants its Products against defects in material and workmanship (“Defects”) for a period of eighteen (18) months from shipment or one (1) year from installation (“Warranty Period”).

PurchaseracknowledgesthattheProductsareprovidedtothePurchasersubjectonlytothelimitedwarrantiesprovidedbythemanufactureroftheProductsandaresubjecttoalloftheconditions,limitationsandexclusionssetouttherein,allofwhicharehereby accepted by the Purchaser.

Extent of Remedy. Where ValvSource is advised in writing of Defects within the Warranty Period, Manufacturer will be deemed to have received notice of the defect and Manufacturer will, at its option, replace or recondition the Product without charge.WhereareplacementorreconditionedProductisprovidedduringtheWarrantyPeriod,thatProductshallbesubjecttothe same warranty for the unexpired portion of the original Warranty Period. This remedy shall constitute the exclusive remedy available to Customers for defective Products.

Limitations. Neither ValvSource nor Manufacturer shall be liable for any incidental, consequential or other damages, costs or economic losses, including, without limitation, any resulting from labour charges, delays, vandalism, negligence, fouling caused by foreign material, damage from adverse water conditions, chemicals, acts of God, or circumstances that are not controllable or reasonably foreseeable by either Manufacturer or ValvSource.

Invalidation of Warranty. The warranty exclusions include, without limitation, (I) any defects caused by faulty installation performed by Purchaser or third parties, (II) any damage caused by the contractors or tradesman of the Purchaser, (III) any damage caused by improper use or misuse, including exposure to excessive temperatures, moisture or cleaning agents and solvents and (IV) any damage caused during transportation or improper storage. All claims received by ValvSource beyond the Warranty Period are invalid and shall not be accepted.

Disclaimer. Except for the express written warranty contained herein, neither Manufacturer nor ValvSource makes any other warranty, condition, guarantee or indemnity, express or implied, statutory or otherwise, regarding the Products INCLUDING WITHOUT LIMITATION, TO THE EXTENT PERMITTED BY LAW, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. All other warranties, conditions guarantees and indemnities regarding any Products are hereby disclaimed, excluded and overridden.

Further Warranty Information. For complete detailed terms of sale and warranty information on all products distributed by ValvSource, including brands from third party manufacturers distributed by ValvSource, please visit: http://www.valvsource.com. Please refer to terms and conditions section.

Flow+ is a registered trademark

Ball Valves - processandsteam.comprocessandsteam.com/PSSpdfs/Flow+BallValveBrochure2012.pdf- NACE...

Documents

Transcript of Ball Valves - processandsteam.comprocessandsteam.com/PSSpdfs/Flow+BallValveBrochure2012.pdf- NACE...