Ball & Socket Joints - Springfix

Ball & Socket Joints

...our linkages, your solution

ov-ball-and-socket-joints-divider - Updated - 12-01-2017


OverviewBall & Socket Joints

Ball and Socket Joints

Ball and socket joints to DIN 71802 available in zinc plated steel and stainless steel. Right and left hand threads available.

Pages 76 - 81

Pages 82 - 87

Pages 88 - 93

Pages 94 - 97

Pages 100

Pages 101 - 106

Ball and Socket Joints - with sealing caps

Ball and socket joints to DIN 71802 available in zinc plated steel and stainless steel. Right and left hand threads available.

Sizes M5 up to M16.

Ball and Socket Joints - with sealing caps and spanner fl ats

Ball and socket joints to DIN 71802 available in zinc plated steel and stainless steel. Right and left hand threads available. Spanner fl ats on housing to aid installation.

Axial Ball and Socket Joints

In-line ball and socket joints to DIN 71802 available in zinc plated steel and stainless steel.

Threaded Ball Studs

Threaded ball studs to DIN 71803 form C available in zinc plated steel.

Quick Release - plus other ball and socket joints

Quick release ball joints allow rapid release and reconnection of ball stud for easyinstallation. DMG6 and male:male ball joints and lockable also available.

Sizes M5 up to M10.

Sizes M5 up to M16.

Sizes M5 up to M16.

Sizes M5 up to M14 x 1,5.

Sizes M5 up to M14.

7501483 266 784Springfix Linkages is a division of Automotion Components Ltd

[email protected]

ov-ball-and-socket-joints-overview - U

pdated - 12-01-2017

76 springfixlinkages.comSpringfix Linkages is a division of Automotion Components Ltd

Ball and Socket JointsBall &Socket Joints

MaterialSteel, silver zinc plated.Ball stud: minimum tensile strength Rm=600N/mm².Housing: minimum tensile strength Rm=500N/mm².

Technical NotesTo DIN 71802 form CS.Supplied with hexagon nut.Safety ring aids the retention of the ball stud in the housing.*M14x1,5 is a fine pitch thread

TipsFor yellow zinc plated, see R3463.For sealing cap version, see R3470.Standard thread is right hand, (for left hand thread see R3461).

R3460

18° 18°

A/F

DIN 934

l1

l2

d2 d3

d2

h1

h2

d1d4

Order No. Thread(hand) d1 d2 l1 ±0.3 d3 d4 l2 min.

Xg

R3460.R005 Right 8 M 5 22 8 12,8 10,2 15,2R3460.R006 Right 10 M 6 25 10 14,8 11,5 25,2R3460.R008 Right 13 M 8 30 13 19,3 14,0 53,1R3460.R010 Right 16 M10 35 16 24,0 15,5 103,8R3460.R012 Right 16 M12 35 16 24,0 15,5 103,8R3460.R014 Right 19 M14x1,5* 45 19 30,0 21,5 220,9R3460.R015 Right 19 M14 45 19 30,0 21,5 220,9R3460.R016 Right 19 M16 45 19 30,0 21,5 220,9

Order No.h1

±0.3

h2

±0.3

A/Fh14

Min. extraction force Kg

Max. static load Kg

Max. dynamic load Kg

Max. force required for

movement Kg

R3460.R005 10,2 9 7 3 50 20 3R3460.R006 12,5 11 8 4 100 40 4R3460.R008 16,5 13 11 6 200 80 6R3460.R010 20,0 16 13 8 400 160 8R3460.R012 20,0 16 13 8 400 160 8R3460.R014 28,0 19 16 10 800 320 10R3460.R015 28,0 19 16 10 800 320 10R3460.R016 28,0 19 16 10 800 320 10

77 01483 266 [email protected]

Springfix Linkages is a division of Automotion Components Ltd

Ball and Socket Jointsleft hand threadBall and Socket Jointsleft hand thread

Ball &Socket Joints

MaterialSteel, silver zinc plated.Ball stud: minimum tensile strength Rm=600N/mm².Housing: minimum tensile strength Rm=500N/mm².

Technical NotesTo DIN 71802 form CS.Supplied with hexagon nut.Safety ring aids the retention of the ball stud in the housing.*M14x1,5 is a fine pitch thread

TipsFor yellow zinc plated, see R3464.For sealing cap version, see R3471.

R3461

18° 18°

A/F

DIN 934

l1

l2

d2 d3

d2

h1

h2

d1d4


Xg

R3461.L005 Left 8 M 5 22 8 12,8 10,2 15,2R3461.L006 Left 10 M 6 25 10 14,8 11,5 25,2R3461.L008 Left 13 M 8 30 13 19,3 14,0 53,1R3461.L010 Left 16 M10 35 16 24,0 15,5 103,8R3461.L012 Left 16 M12 35 16 24,0 15,5 103,8R3461.L014 Left 19 M14x1,5* 45 19 30,0 21,5 220,9R3461.L015 Left 19 M14 45 19 30,0 21,5 220,9R3461.L016 Left 19 M16 45 19 30,0 21,5 220,9

Order No.h1

±0.3

h2

±0.3

A/Fh14


Max. static load Kg



movement Kg

R3461.L005 10,2 9 7 3 50 20 3R3461.L006 12,5 11 8 4 100 40 4R3461.L008 16,5 13 11 6 200 80 6R3461.L010 20,0 16 13 8 400 160 8R3461.L012 20,0 16 13 8 400 160 8R3461.L014 28,0 19 16 10 800 320 10R3461.L015 28,0 19 16 10 800 320 10R3461.L016 28,0 19 16 10 800 320 10

springfixlinkages.comSpringfix Linkages is a division of Automotion Components Ltd

Ball and Socket JointsBall & Socket Joints

MaterialSteel, yellow zinc plated.Ball stud: minimum tensile strength Rm=600N/mm².Housing: minimum tensile strength Rm=500N/mm².

Technical NotesTo DIN 71802 form CS.Supplied with hexagon nut.Safety ring aids the retention of the ball stud in the housing.*M14x1,5 is a fine pitch thread.

TipsFor sealing cap version, see R3473.For stainless steel see R3466.Standard thread is right hand, (for left hand thread see R3464).

R3463

18° 18°

A/F

DIN 934

l1

l2

d2 d3

d2

h1

h2

d1d4

Order No. Thread(hand)

d1 d2 l1 ±0.3 d3 d4 l2 min.Xg


Order No.h1

±0.3

h2

±0.3

A/Fh14


Max. static load Kg



movement Kg


01483 266 [email protected]


Ball and Socket Jointsleft hand threadBall and Socket Jointsleft hand thread


MaterialSteel, yellow zinc plated.Ball stud: minimum tensile strength Rm=600N/mm².Housing: minimum tensile strength Rm=500N/mm².

Technical NotesTo DIN 71802 form CS.Supplied with hexagon nut.Safety ring aids the retention of the ball stud in the housing.*M14x1,5 is a fine pitch thread.

TipsFor sealing cap version, see R3474.For stainless steel, see R3467.

R3464

18° 18°

A/F

DIN 934

l1

l2

d2 d3

d2

h1

h2

d1d4


d1 d2 l1 ±0.3 d3 d4 l2 min.Xg


Order No.h1

±0.3

h2

±0.3

A/Fh14


Max. static load Kg



movement Kg



Ball and Socket Jointswith sealing cap


MaterialSteel, silver zinc plated.Ball stud: steel (minimum tensile strength Rm=600N/mm²).Housing: steel (minimum tensile strength Rm=500N/mm²).Sealing cap: neoprene.

Technical NotesTo DIN 71802 form CS. Supplied with hexagon nut.Safety ring aids the retention of the ball stud in the housing.*M14x1,5 is a fine pitch thread.

TipsFor yellow zinc plated, see R3473.Standard thread is right hand, (for left hand thread see R3471).

R3470

18° 18°

A/F

DIN 934

d4

l1

l2

d2 d3

d2

h1

h2

d1


d1 d2 l1 ±0.3 d3 d4 l2 min.Xg


Order No.h1

±0.3

h2

±0.3

A/Fh14


Max. static load Kg



movement Kg




Ball and Socket Jointswith sealing cap - left hand threadBall and Socket Jointswith sealing cap - left hand thread


MaterialSilver zinc plated.Ball stud: minimum tensile strength Rm=600N/mm².Housing: minimum tensile strength

Rm=500N/mm².Sealing cap: Neoprene

Technical NotesTo DIN 71802 form CS. Supplied with hexagon nut.Safety ring aids the retention of the

ball stud in the housing.*M14x1,5 is a fine pitch thread.

TipsFor yellow zinc plated, see R3474.

R3471

18° 18°

A/F

DIN 934

d4

l1

l2

d2 d3

d2

h1

h2

d1


d1 d2 l1 ±0.3 d3 d4 l2 min.Xg


Order No.h1

±0.3

h2

±0.3

A/Fh14


Max. static load Kg



movement Kg



Ball and Socket Jointswith sealing cap


MaterialYellow zinc plated.Ball stud: minimum tensile strength Rm=600N/mm².Housing: minimum tensile strength Rm=500N/mm².Sealing cap: Neoprene.


TipsFor stainless steel version, see R3476.Standard thread is right hand, (for left hand thread see R3474).

R3473

18° 18°

A/F

DIN 934

d4

l1

l2

d2 d3

d2

h1

h2

d1


d1 d2 l1 ±0.3 d3 d4 l2 min.Xg


Order No.h1

±0.3

h2

±0.3

A/Fh14


Max. static load Kg



movement Kg




Ball and Socket Jointswith sealing cap - left hand threadBall and Socket Jointswith sealing cap - left hand thread


MaterialYellow zinc plated.Ball stud: minimum tensile strength Rm=600N/mm².Housing: minimum tensile strength Rm=500N/mm².Sealing cap: Neoprene.


TipsFor stainless steel version see R3477.

R3474

18° 18°

A/F

DIN 934

d4

l1

l2

d2 d3

d2

h1

h2

d1


d1 d2 l1 ±0.3 d3 d4 l2 min.Xg


Order No.h1

±0.3

h2

±0.3

A/Fh14


Max. static load Kg



movement Kg



Ball and Socket Jointwith flats on housing


MaterialStud: carbon steel.Housing: steel (9sMnPb28), silver zinc plated.Sealing cap: neoprene.


TipsFor yellow zinc plated see R3493.Standard thread is right hand, (for left hand thread see R3491).

R3490

d4

18° 18°

A/F

l1

l2

d2 d3

d5

d2

h1

h2

h3

d1

Order No. Thread(hand) d1 d2 l1 ±0.3 d3 ±0.5 d4 ±0.5 d5 ±0.5 h1 ±0.3 h2 ±0.3 l2 min.

Xg

R3490.R005 Right 8 M 5 22 8 12,8 8 10,0 9 10,2 15,2R3490.R006 Right 10 M 6 25 10 14,8 10 12,5 11 11,5 25,2R3490.R008 Right 13 M 8 30 13 19,3 13 16,5 13 14,0 53,1R3490.R010 Right 16 M10 35 16 24,0 16 20,0 16 15,5 103,8R3490.R012 Right 16 M12 35 16 24,0 16 20,0 16 15,5 103,8R3490.R014 Right 22 M14x1,5* 45 22 30,0 22 28,0 20 21,5 220,9R3490.R015 Right 22 M14 45 22 30,0 22 28,0 20 21,5 220,9R3490.R016 Right 22 M16 45 22 30,0 22 28,0 20 21,5 220,9

Order No. h3A/Fh14


Max. static loadKg


Max. force required for movement Kg

R3490.R005 0,65 7 3 50 20 3R3490.R006 0,70 8 4 100 40 4R3490.R008 1,15 11 6 200 80 6R3490.R010 1,15 13 8 400 160 8R3490.R012 1,15 13 8 400 160 8R3490.R014 0,50 17 10 800 320 10R3490.R015 0,50 17 10 800 320 10R3490.R016 0,50 17 10 800 320 10



Ball and Socket Jointleft hand thread- with flats on housingBall and Socket Jointleft hand thread- with flats on housing


MaterialStud: carbon steel.Housing: steel (9sMnPb28), silver zinc plated.Sealing cap: neoprene.


TipsFor yellow zinc plated version see R3494

R3491

d4

18° 18°

A/F

l1

l2

d2 d3

d5

d2

h1

h2

h3

d1

Order No. Thread(hand) d1 l1 ±0.3 d2 d3 ±0.5 d4 ±0.5 d5 ±0.5 h1 ±0.3 h2 ±0.3 l2 min.

Xg

R3491.L005 Left 8 22 M5 8 12,8 8 10,0 9 10,2 15,2R3491.L006 Left 10 25 M6 10 14,8 10 12,5 11 11,5 25,2R3491.L008 Left 13 30 M8 13 19,3 13 16,5 13 14,0 53,1R3491.L010 Left 16 35 M10 16 24,0 16 20,0 16 15,5 103,8R3491.L012 Left 16 35 M12 16 24,0 16 20,0 16 15,5 103,8R3491.L014 Left 22 45 M14x1,5 22 30,0 22 28,0 20 21,5 220,9R3491.L015 Left 22 45 M14 22 30,0 22 28,0 20 21,5 220,9R3491.L016 Left 22 45 M16 22 30,0 22 28,0 20 21,5 220,9

Order No. h3A/Fh14


Max. static load Kg



R3491.L005 0,65 7 3 50 20 3R3491.L006 0,70 8 4 100 40 4R3491.L008 1,15 11 6 200 80 6R3491.L010 1,15 13 8 400 160 8R3491.L012 1,15 13 8 400 160 8R3491.L014 0,50 17 10 800 320 10R3491.L015 0,50 17 10 800 320 10R3491.L016 0,50 17 10 800 320 10


Ball and Socket Jointwith flats on housing


MaterialStud: carbon steel.Housing: steel (9sMnPb28), yellow zinc plated.Sealing cap: neoprene.


TipsFor stainless steel see R3494.Standard thread is right hand, (for left hand thread see R3496).

R3493

d4

18° 18°

A/F

l1

l2

d2 d3

d5

d2

h1

h2

h3

d1


Xg

R3493.R005 Right 8 22 M5 8 12,8 8 10,0 9 10,2 15,2R3493.R006 Right 10 25 M6 10 14,8 10 12,5 11 11,5 25,2R3493.R008 Right 13 30 M8 13 19,3 13 16,5 13 14,0 53,1R3493.R010 Right 16 35 M10 16 24,0 16 20,0 16 15,5 103,8R3493.R012 Right 16 35 M12 16 24,0 16 20,0 16 15,5 103,8R3493.R014 Right 22 45 M14x1,5* 22 30,0 22 28,0 20 21,5 220,9R3493.R015 Right 22 45 M14 22 30,0 22 28,0 20 21,5 220,9R3493.R016 Right 22 45 M16 22 30,0 22 28,0 20 21,5 220,9

Order No. h3A/Fh14


Max. static loadKg






Ball and Socket Jointleft hand thread - with flats on housingBall and Socket Jointleft hand thread - with flats on housing


MaterialStud: carbon steel.Housing: steel (9sMnPb28), yellow zinc plated.Sealing cap: neoprene.


TipsFor stainless steel see R3497.

R3494

d4

18° 18°

A/F

l1

l2

d2 d3

d5

d2

h1

h2

h3

d1


Xg

R3494.L005 Left 8 22 M5 8 12,8 8 10,0 9 10,2 15,2R3494.L006 Left 10 25 M6 10 14,8 10 12,5 11 11,5 25,2R3494.L008 Left 13 30 M8 13 19,3 13 16,5 13 14,0 53,1R3494.L010 Left 16 35 M10 16 24,0 16 20,0 16 15,5 103,8R3494.L012 Left 16 35 M12 16 24,0 16 20,0 16 15,5 103,8R3494.L014 Left 22 45 M14x1,5* 22 30,0 22 28,0 20 21,5 220,9R3494.L015 Left 22 45 M14 22 30,0 22 28,0 20 21,5 220,9R3494.L016 Left 22 45 M16 22 30,0 22 28,0 20 21,5 220,9

Order No. h3A/Fh14


Max. static load Kg






Stainless Ball and Socket JointsStainless Ball and Socket Joints Ball & Socket Joints

MaterialStainless steel (A2, AISI 303).

Technical NotesTo DIN 71802 form CS.Supplied with hexagon nut.

Safety ring aids the retention of the ball stud in the housing.*M14x1,5 is a fine pitch thread.

TipsFor sealing cap version, see R3476.Standard thread is right hand, (for left hand thread see R3467).

R3466

18° 18°

A/F

DIN 934

l1

l2

d2 d3

d2

h1

h2

d1d4


Xg


Order No.h1

±0.3

h2

±0.3

A/Fh14


Max. static load Kg



movement Kg



Stainless Ball and Socket Jointsleft hand thread


MaterialStainless steel (A2, AISI 303).

Technical NotesTo DIN 71802 form CS.Supplied with hexagon nut.Safety ring aids the retention of the

ball stud in the housing.*M14x1,5 is a fine thread pitch.

TipsFor sealing cap version, see R3477.

R3467

18° 18°

A/F

DIN 934

l1

l2

d2 d3

d2

h1

h2

d1d4


Xg


Order No.h1

±0.3

h2

±0.3

A/Fh14


Max. static load Kg



movement Kg




Stainless Ball and Socket Jointwith sealing capStainless Ball and Socket Jointwith sealing cap


MaterialStainless steel (A2, AISI 303).Sealing cap: neoprene.

Technical NotesSupplied with hexagon nut.Safety ring aids the retention of the ball stud in the housing.*M14x1,5 is a fine pitch thread.

TipsStandard thread is right hand, (for left hand see R3477).

R3476

18° 18°

A/F

DIN 934

d4

l1

l2

d2 d3

d2

h1

h2

d1


Xg


Order No.h1

±0.3

h2

±0.3

A/Fh14


Max. static load Kg



movement Kg



Stainless Ball and Socket Jointwith sealing cap - left hand thread


MaterialStainless steel (A2, AISI 303).Sealing cap: neoprene.

Technical NotesSupplied with hexagon nut.Safety ring aids the retention of the

ball stud in the housing.*M14x1,5 is a fine pitch thread.

R3477

18° 18°

A/F

DIN 934

d4

l1

l2

d2 d3

d2

h1

h2

d1


Xg


Order No.h1

±0.3

h2

±0.3

A/Fh14


Max. static load Kg



movement Kg



Stainless Ball and Socket Jointwith flats on housing


MaterialStainless steel (AISI 303).Sealing cap: neoprene.


TipsStandard thread is right hand, (for left hand thread see R3497).

R3496

d4

18° 18°

A/F

l1

l2

d2 d3

d5

d2

h1

h2

h3

d1


Xg

R3496.R005 Right 8 22 M5 8 12,8 8 10,0 9 10,2 15,2R3496.R006 Right 10 25 M6 10 14,8 10 12,5 11 11,5 25,2R3496.R008 Right 13 30 M8 13 19,3 13 16,5 13 14,0 53,1R3496.R010 Right 16 35 M10 16 24,0 16 20,0 16 15,5 103,8R3496.R012 Right 16 35 M12 16 24,0 16 20,0 16 15,5 103,8R3496.R014 Right 22 45 M14x1,58 22 30,0 22 28,0 20 21,5 220,9R3496.R015 Right 22 45 M14 22 30,0 22 28,0 20 21,5 220,9R3496.R016 Right 22 45 M16 22 30,0 22 28,0 20 21,5 220,9

Order No. h3A/Fh14


Max. static load Kg






Stainless Ball and Socket Jointleft hand thread - with flats on housingStainless Ball and Socket Jointleft hand thread - with flats on housing


MaterialStainless steel (AISI 303).Sealing cap: neoprene.

Technical NotesTo DIN 71802 form CS. Supplied with hexagon nut.

Safety ring aids the retention of the ball stud in the housing.*M14x1,5 is a fine pitch thread.

R3497

d4

18° 18°

A/F

l1

l2

d2 d3

d5

d2

h1

h2

h3

d1


Xg

R3497.L005 Left 8 22 M5 8 12,8 8 10,0 9 10,2 15,2R3497.L006 Left 10 25 M6 10 14,8 10 12,5 11 11,5 25,2R3497.L008 Left 13 30 M8 13 19,3 13 16,5 13 14,0 53,1R3497.L010 Left 16 35 M10 16 24,0 16 20,0 16 15,5 103,8R3497.L012 Left 16 35 M12 16 24,0 16 20,0 16 15,5 103,8R3497.L014 Left 22 45 M14x1,5* 22 30,0 22 28,0 20 21,5 220,9R3497.L015 Left 22 45 M14 22 30,0 22 28,0 20 21,5 220,9R3497.L016 Left 22 45 M16 22 30,0 22 28,0 20 21,5 220,9

Order No. h3A/Fh14

Min extraction force Kg

Max static load Kg Max dynamic load Kg Max force required for movement Kg



Threaded Ball StudsBall &Socket Joints

MaterialLow carbon steel (1018), silver zinc plated.

Technical NotesTo DIN 71803 Form C*M14x1.5 is a fine pitch thread.

R3526

d1

h1

h2h5

h4h3

A/F

d2

d3

Order No. d1 h9 h1 ±0,3 d2 d3 +0,0 -0,2 h2 ±0,3 h3 ±0,3 h4 +0,4 -0,0 h5 max. A/F

R3526.005 8,0 9,0 M5 8,0 10,2 12,5 2,0 4,0 7,0R3526.006 10,0 11,0 M6 10,0 12,5 15,5 2,2 4,0 8,0R3526.008 13,0 13,0 M8 13,0 16,5 18,5 2,4 5,3 11,0R3526.010 16,0 16,0 M10 16,0 20,0 23,0 2,7 7,3 13,0R3526.012 16,0 16,0 M12 16,0 20,0 23,0 2,7 7,3 13,0R3526.014 19,0 20,0 M14 x 1.5* 19,0 28,0 28,5 3,0 10,8 16,0R3526.015 19,0 20,0 M14 19,0 28,0 28,5 3,0 10,8 16,0R3526.016 19,0 20,0 M16 19,0 28,0 28,5 3,0 10,8 16,0



Rivet StudsRivet Studs R3 Rotary

MaterialLow carbon steel (1018), silver zinc plated.

Technical NotesTo DIN 71803 Form B*M14x1.5 is a fine pitch thread.

R3527d2

d1

h2

h1

Order No. d1 d2 h11 h1 ±0,2 h2 ±0,3

R3527.060-035 6,0 4,0 3,5 8,5R3527.080-040 8,0 5,0 4,0 9,0R3527.080-075 8,0 5,0 7,5 9,0R3527.100-045 10,0 6,0 4,5 11,0R3527.100-080 10,0 6,0 8,0 11,0R3527.130-050 13,0 8,0 5,0 13,0R3527.130-100 13,0 8,0 10,0 13,0R3527.160-060 16,0 10,0 6,0 16,0R3527.160-130 16,0 10,0 13,0 16,0R3527.190-120 19,0 14,0 12,0 20,0R3527.190-180 19,0 14,0 18,0 20,0


Stainless Threaded Ball StudsR3 Rotary

MaterialStainless steel (AISI 304)

Technical NotesTo DIN 71803 Form C*M14x1.5 is a fine pitch thread.

R3528

d1

h1

h2

h5

h4h3

A/F

d2

d3

Order No. d1 h9 h1 ±0,3 d2 d3 +0,0 -0,2 h2 ±0,3 h3 ±0,3 h4 +0,4 -0,0 h5 max. A/F

R3528.005 8,0 9,0 M5 8,0 10,2 12,5 2,0 4,0 7,0R3528.006 10,0 11,0 M6 10,0 12,5 15,5 2,2 4,0 8,0R3528.008 13,0 13,0 M8 13,0 16,5 18,5 2,4 5,3 11,0R3528.010 16,0 16,0 M10 16,0 20,0 23,0 2,7 7,3 13,0R3528.012 16,0 16,0 M12 16,0 20,0 23,0 2,7 7,3 13,0R3528.014 19,0 20,0 M14 x 1.5* 19,0 28,0 28,5 3,0 10,8 16,0R3528.015 19,0 20,0 M14 19,0 28,0 28,5 3,0 10,8 16,0R3528.016 19,0 20,0 M16 19,0 28,0 28,5 3,0 10,8 16,0



Stainless Rivet StudsStainless Rivet Studs R3 Rotary

MaterialStainless steel (AISI 304).

Technical NotesTo DIN 71803 Form B*M14x1.5 is a fine pitch thread.

R3529d2

d1

h2

h1

Order No. d1 d2 h11 h1 ±0,2 h2 ±0,3

R3529.060-035 6,0 4,0 3,5 8,5R3529.080-040 8,0 5,0 4,0 9,0R3529.080-075 8,0 5,0 7,5 9,0R3529.100-045 10,0 6,0 4,5 11,0R3529.100-080 10,0 6,0 8,0 11,0R3529.130-050 13,0 8,0 5,0 13,0R3529.130-100 13,0 8,0 10,0 13,0R3529.160-060 16,0 10,0 6,0 16,0R3529.160-130 16,0 10,0 13,0 16,0R3529.190-120 19,0 14,0 12,0 20,0R3529.190-180 19,0 14,0 18,0 20,0



Ball Joint - Housing OnlyBall Joint - Housing Only Ball &Socket Joints

MaterialLow carbon steel, silver zinc plated.

Technical NotesTo DIN 71802.

TipsStandard thread is right hand thread.

Important NotesThese ball joints are used in light linkage applications where it is desired to have the ability to be able to remove the ball stud. The ball joint is supplied WITHOUT the ball stud and retaining clip.

R3524

d1

l1

l2

d2 d3

A/F

Order No. Thread (hand) d1 d2 l1 l2 d3 A/F

R3524.R005 Right 8 M 5 22 10,2 8 7R3524.R006 Right 10 M 6 25 11,5 10 9R3524.R008 Right 13 M 8 30 14,0 13 11R3524.R010 Right 16 M10 35 15,5 16 13R3524.R012 Right 16 M12 35 15,5 16 13


Plastic Ball and Socket JointBall &Socket Joints

MaterialHousing: Black plastic (Igumid G).Stud: Steel, silver zinc plated.

Technical NotesLow weight.Maintenance free.


Important NotesPlastic stud available on request, add -PS to part number.

R3520A/F

l2

l1

h4

d2

h5h6

d3

h3

h1

h2

d1l3l4

d2

Order No. Thread(hand) d1 +0.1 -0.1 d2 l1 +0.3 -0.3 d3 +0.5 -0.5 l2 +0.5 -0.5 l3 l4 +0.5 -0.5 h1 +0.2 -0.2 h2 +0.3 -0.3

Xg

R3520.R005 Right 8,0 M 5 22,0 12,8 28,4 14,0 11,0 9,0 10,2 2,6R3520.R006 Right 10,0 M 6 25,0 14,8 32,4 16,0 13,0 11,0 12,5 4,0R3520.R008 Right 13,0 M 8 30,0 19,3 39,7 18,0 16,0 13,0 16,5 8,2R3520.R010 Right 16,0 M10 35,0 24,0 47,0 20,0 18,0 16,0 20,0 13,8

R3520.L005 Left 8,0 M 5 22,0 12,8 28,4 14,0 11,0 9,0 10,2 2,6R3520.L006 Left 10,0 M 6 25,0 14,8 32,4 16,0 13,0 11,0 12,5 4,0R3520.L008 Left 13,0 M 8 30,0 19,3 39,7 18,0 16,0 13,0 16,5 8,2R3520.L010 Left 16,0 M10 35,0 24,0 47,0 20,0 18,0 16,0 20,0 13,8

Order No. h3 min. h4 +0.5 -0.5 h5 +0.4 -0.4 h6 +0.5 -0.5 A/FRecommended

pivot angle Max. pivot angle

R3520.R005 8,2 25,6 10,8 0,65 8 18° 25°R3520.R006 10,5 30,9 12,3 0,70 9 18° 25°R3520.R008 13,5 38,8 16,2 1,15 12 18° 25°R3520.R010 16,0 47,0 20,0 1,15 14 18° 25°

R3520.L005 8,2 25,6 10,8 0,65 8 18° 25°R3520.L006 10,5 30,9 12,3 0,70 9 18° 25°R3520.L008 13,5 38,8 16,2 1,15 12 18° 25°R3520.L010 16,0 47,0 20,0 1,15 14 18° 25°



Quick Release Ball JointsQuick Release Ball Joints Ball &Socket Joints

MaterialBody, shield and ball stud (BS. 970230M07Pb) leaded low carbon steel equivalent SAE 12L14. Body and ball stud are case hardened.Spring: (302S26) stainless steel or equivalent.Yellow zinc plated.

Technical NotesThe spring loaded outer shield allows both rapid release and reconnection of the ball stud. Linkage assemblies can be installed or removed without disturbing pre-set centres. These are metric equivalents to SAE J 490 Style 1 quick release detachable ball joints.


R3535

l1l3

l2

d1

h3d5

30°

d2

d3

d4

h1

h2

d2A/F

Order No. Thread (hand) d1 d2 l1 l2 l3 h1 h2 h3 d3 d4 d5 A/F X

g

R3535.005 Right 6,35 M 5 23 28 11,1 11,1 11,9 28,6 7,9 11,1 4,35 8 17R3535.006 Right 7,9 M 6 24,6 30 13 12,6 12,6 33,4 9,4 13 4,95 10 25R3535.008 Right 8,6 M 8 31,7 40 14,3 15,2 15,2 40,6 11,1 16 5,8 11 48R3535.010 Right 10,7 M10 39,7 49 27 19,8 19,8 51,4 14,1 19 6,85 13 78



DMG Ball and Socket JointsDMG Ball and Socket Joints Ball and Socket Joints

MaterialYellow zinc plated.Body and ball stud low carbon steel (BS.970230M07Pb) or equivalent. Ball stud is case hardened.

Technical NotesThe swaging of the body produces a permanent assembly and the fitted sealing cap helps resist dirt ingress. The hexagon form of studs facilitates assembly.

These are metric equivalents to SAE J490 Style 1.


R3530A/F

A/F

l3

d1 d2

l1

l2

h1

h2

d1

35°

Order No. Thread (hand) d1 l1 l2 l3 d2 h1 h2 A/F

R3530.R006 Right M 6 24,61 30,96 12,70 11,13 14,30 11,91 9,53R3530.R008 Right M 8 28,58 35,71 14,30 12,70 17,48 13,49 11,13R3530.R010 Right M10 34,93 42,88 19,05 15,88 22,23 17,48 12,70R3530.R012 Right M12 49,23 60,33 25,40 19,05 28,58 22,23 15,88

R3530.L006 Left M 6 24,61 30,96 12,70 11,13 14,30 11,91 9,53R3530.L008 Left M 8 28,58 35,71 14,30 12,70 17,48 13,49 11,13R3530.L010 Left M10 34,93 42,88 19,05 15,88 22,23 17,48 12,70R3530.L012 Left M12 49,23 60,33 25,40 19,05 28,58 22,23 15,88


Stainless DMG Ball and Socket JointBall and Socket Joints

MaterialStainless steel (AISI 303).

Technical NotesThe swaging of the body produces a permanent assembly and the fitted sealing cap helps resist dirt ingress.

The hexagon form of studs facilitates assembly.


R3532A/F

A/F

l3

d1 d2

l1

l2

h1

h2

d1

35°

Order No. Thread(hand) d1 l1 l2 l3 d2 h1 h2 A/F

R3532.R006 Right M 6 24,61 30,96 12,70 11,13 14,30 11,91 9,53R3532.R008 Right M 8 28,58 35,71 14,30 12,70 17,48 13,49 11,13R3532.R010 Right M10 34,93 42,88 19,05 15,88 22,23 17,48 12,70R3532.R012 Right M12 49,23 60,33 25,40 19,05 28,58 22,23 15,88

R3532.L006 Left M 6 24,61 30,96 12,70 11,13 14,30 11,91 9,53R3532.L008 Left M 8 28,58 35,71 14,30 12,70 17,48 13,49 11,13R3532.L010 Left M10 34,93 42,88 19,05 15,88 22,23 17,48 12,70R3532.L012 Left M12 49,23 60,33 25,40 19,05 28,58 22,23 15,88



Male DMG Ball and Socket JointsMale DMG Ball and Socket Joints Ball &Socket Joints

MaterialLow carbon steel (1018), yellow zinc plated.

Technical NotesThe swaging of the body produces a permanent assembly and the fitted sealing cap helps resist dirt ingress. The hexagon form of studs facilitates assembly.


R3539

35°

A/F

l2l1

d1 h3

l3

h1

h2 d2

d1


A/F d1 l1 l2 l3 h1 h2 h3 d2

R3539.R005 Right 7,95 M 5 22,23 27,00 12,04 11,13 11,13 9,53 4,37R3539.R006 Right 9,53 M 6 24,61 30,96 12,85 14,30 11,91 11,13 4,90R3539.R008 Right 11,13 M 8 28,58 35,71 16,03 17,48 13,49 12,70 5,89R3539.R010 Right 12,70 M10 34,93 42,88 19,05 22,23 17,48 15,88 7,54R3539.R012 Right 15,88 M12 49,23 60,33 25,40 28,58 22,23 19,05 10,59

R3539.L005 Left 7,95 M 5 22,23 27,00 12,04 11,13 11,13 9,53 4,37R3539.L006 Left 9,53 M 6 24,61 30,96 12,85 14,30 11,91 11,13 4,90R3539.L008 Left 11,13 M 8 28,58 35,71 16,03 17,48 13,49 12,70 5,89R3539.L010 Left 12,70 M10 34,93 42,88 19,05 22,23 17,48 15,88 7,54R3539.L012 Left 15,88 M12 49,23 60,33 25,40 28,58 22,23 19,05 10,59


Male Ball and Socket JointsBall &Socket Joints

MaterialLow carbon steel, silver zinc plated.

Technical NotesSafety ring aids the retention of the ball stud in the housing.


R3538

l1l2

d2

h2

h1

d2

d1

18° 18°

Order No. Thread(hand) d1 d2 l1 l2 h1 h2

R3538.R005 Right 8 M 5 22,5 12 10,2 9R3538.R006 Right 10 M 6 25 13,5 12,5 11R3538.R008 Right 13 M 8 31,5 17,5 16,5 13R3538.R010 Right 16 M10 37,5 21,5 20 16R3538.R012 Right 16 M12 42 25,5 20 16

R3538.L005 Left 8 M 5 22,5 12 10,2 9R3538.L006 Left 10 M 6 25 13,5 12,5 11R3538.L008 Left 13 M 8 31,5 17,5 16,5 13R3538.L010 Left 16 M10 37,5 21,5 20 16R3538.L012 Left 16 M12 42 25,5 20 16



Lockable Ball jointLockable Ball joint Ball & Socket Joints

MaterialSteel, (silver zinc plated). Brake piece technopolymer (polyamide PA).

Technical NotesThe clamping nut can be set to give a required thrust on the Belleville spring washers, in order to increase resistance to the movement of the ball

stud, the spring washers act as safety washers for the screws.Once the max. thrust to the spring washers is reached the ball stud is firmly fixed in position.

R3540

type MF

type MM

4 bellevillespring washers

25°

A/F1A/F2

type FF

type FM

A/F2

l3

d2

l1d1 l2 l2

d1 d1

d1

d1

l4 l5 l1

d1 d3 d4 d1

l6

Order No. d1 l1 d2 d3 l2 l3 l4 l5 l6 A/F1 A/F2

R3540.MF008 M8 12 11 19 10 19,5 18,5 15 - 17 9R3540.MF010 M10 15 13 21 12 23,5 21,5 17 - 19 11R3540.MM008 M8 12 11 19 - 19,5 18,5 15 - 17 9R3540.MM010 M10 15 13 21 - 23,5 21,5 17 - 19 11R3540.FF008 M8 - 11 19 10 19,5 18,5 15 - 17 9R3540.FF010 M10 - 13 21 12 23,5 21,5 17 - 19 11R3540.FM008 M8 12 11 19 - 19,5 18,5 15 18,5 17 9R3540.FM010 M10 15 13 21 - 23,5 21,5 17 20,5 19 11

Ball & Socket Joints - Springfix

Documents

Transcript of Ball & Socket Joints - Springfix