Citace pro výroční zprávu KMT 2017 (zdroj Web of Science) A Model of the Dynamic Error as a Measurement Result of Instruments Defining the Parameters of Moving Objects By: Dichev, D.; Koev, H.; Bakalova, T.; et al. MEASUREMENT SCIENCE REVIEW Volume: 14 Issue: 4 Pages: 183-189 Published: AUG 2014 Citováno v: 1. Dynamic measurement errors prediction for sensors based on firefly algorithm optimize support vector machine By: Jiang, Minlan; Jiang, Lan; Jiang, Dingde; et al. SUSTAINABLE CITIES AND SOCIETY Volume: 35 Pages: 250-256 Published: NOV 2017 Thermal shock resistance of Si3N4 and Si3N4-SiC ceramics with rare-earth oxide sintering additives By: Kasiarova, Monika; Tatarko, Peter; Burik, Peter; et al. Conference: Fractography of advanced ceramics IV Location: Smolenice, SLOVAKIA Date: SEP 29-OCT 02, 2013 JOURNAL OF THE EUROPEAN CERAMIC SOCIETY Volume: 34 Issue: 14 Special Issue: SI Pages: 3301-3308 Published: NOV 2014 citováno v: 1. Effect of SiC addition on the thermal diffusivity of SiAlON ceramics By: Akin, Seniz Reyhan Kushan; Turan, Servet; Gencoglu, Pervin; et al. CERAMICS INTERNATIONAL Volume: 43 Issue: 16 Pages: 13469-13474 Published: NOV 2017 2. Fabrication and strengthening of porous Si3N4 ceramics by replacement of oxide phase with Si3N4 at grain boundary through carbothermal nitridation By: Zhi, Qiang; Xu, Zhaoyun; Pan, Huan; et al. JOURNAL OF MATERIALS RESEARCH Volume: 32 Issue: 17 Pages: 3344-3352 Published: SEP 2017 3. Effect of Sm2O3 on microstructure and high-temperature stability of MgAl2O4-Si3N4 ceramic for solar thermal absorber By: Zhang, Yaxiang; Wu, Jianfeng; Xu, Xiaohong; et al. JOURNAL OF ALLOYS AND COMPOUNDS Volume: 711 Pages: 365-373 Published: JUL 15 2017 4. Effect of magnesium aluminum silicate glass on the thermal shock resistance of BN matrix composite ceramics By: Cai, Delong; Jia, Dechang; Yang, Zhihua; et al. JOURNAL OF THE AMERICAN CERAMIC SOCIETY Volume: 100 Issue: 6 Pages: 2669-2678 Published: JUN 2017 Aging of the photocatalytic TiO2 thin films modified by Ag and Pt By: Hajkova, P.; Matousek, J.; Antos, P. APPLIED CATALYSIS B-ENVIRONMENTAL Volume: 160 Pages: 51-56 Published: NOV 2014 citováno v: 1. Significance of a Noble Metal Nanolayer on the UV and Visible Light Photocatalytic Activity of Anatase TiO2 Thin Films Grown from a Scalable PECVD/PVD Approach By: Baba, Kamal; Bulou, Simon; Quesada-Gonzalez, Miguel; et al. ACS APPLIED MATERIALS & INTERFACES Volume: 9 Issue: 47 Pages: 41200-41209 Published: NOV 29 2017 2. Visible-light-driven selective oxidation of alcohols using a dye-sensitized TiO2-polyoxometalate catalyst By: Yang, Xue; Zhao, Hui; Feng, Jifei; et al. JOURNAL OF CATALYSIS Volume: 351 Pages: 59-66 Published: JUL 2017 3. Fabrication of Ag-Ag2O/reduced TiO2 nanophotocatalyst and its enhanced visible light driven photocatalytic performance for degradation of diclofenac solution By: Cui, Yuqi; Ma, Qiuling; Deng, Xiaoyong; et al. APPLIED CATALYSIS B-ENVIRONMENTAL Volume: 206 Pages: 136-145 Published: JUN 5 2017 4. TiO2/in-situ reduced GO/functionalized with an IL-Cr complex as a ternary photocatalyst composite for efficient carbon monoxide deterioration from air By: Seifvand, Naemeh; Kowsari, Elaheh APPLIED CATALYSIS B-ENVIRONMENTAL Volume: 206 Pages: 184-193 Published: JUN 5 2017 5. One-pot synthesis of Ag-TiO2/reduced graphene oxide nanocomposite for high performance of adsorption and photocatalysis By: Zhang, Lixin; Ni, Changhui; Jiu, Hongfang; et al. CERAMICS INTERNATIONAL Volume: 43 Issue: 7 Pages: 5450-5456 Published: MAY 2017

6. Enhancing Efficiency and Stability of Perovskite Solar Cells through Nb-Doping of TiO2 at Low Temperature By: Yin, Guannan; Ma, Jiaxin; Jiang, Hong; et al. ACS APPLIED MATERIALS & INTERFACES Volume: 9 Issue: 12 Pages: 10752-10758 Published: MAR 29 2017 7. A novel P/Ag/Ag2O/Ag3PO4/TiO2 composite film for water purification and antibacterial application,under solar light irradiation By: Zhu, Qi; Hu, Xiaohong; Stanislaus, Mishma S.; et al. SCIENCE OF THE TOTAL ENVIRONMENT Volume: 577 Pages: 236-244 Published: JAN 15 2017 8. Review on Undoped/Doped TiO2 Nanomaterial; Synthesis and Photocatalytic and Antimicrobial Activity By: Yadav, Shweta; Jaiswar, Gautam JOURNAL OF THE CHINESE CHEMICAL SOCIETY Volume: 64 Issue: 1 Pages: 103-116 Published: JAN 2017

The synergistic effect of advanced oxidation processes to eliminate resistant chemical compounds By: Horakova, Marta, Klementova, Sarka, Kriz, Pavel, Balakrishna, Syam Krishna, Spatenka, Petr, Golovko, Oksana, Hajkova, Pavlina, Exnar, Petr. Conference: 56th Annual Technical Conference of the Society-of-Vacuum-Coaters Location: Providence, FRANCE Date: APR 20-25, 2013 Sponsor(s): Soc Vacuum Coaters SURFACE & COATINGS TECHNOLOGY Volume: 241 Pages: 154-158 Published: FEB 25 2014 citováno v: 1. Comparison of various advanced oxidation processes used in remediation of industrial wastewater laden with recalcitrant pollutants By: Krishnan, S.; Rawindran, H.; Sinnathambi, C. M.; et al. Edited by: Saptoro, A; Khur, WS; Wei, LS; et al. Conference: 29th Symposium of Malaysian Chemical Engineers (SOMChE) Location: Miri, MALAYSIA Date: DEC 01-03, 2016 Sponsor(s): Curtin Univ, Dept Chem Engn; Inst Chem Engineers; Curtin Univ; Sarawak Convent Bur; Sarawak Shell Berhad; Solut Engn; MMI Engn; CREST NanoSolut; Young Scientists Network Malaysia; Inst Mat Malaysia; Sarawak Toursim Board; ACS Malaysia Chapter 29TH SYMPOSIUM OF MALAYSIAN CHEMICAL ENGINEERS (SOMCHE) 2016 Book Series: IOP Conference Series-Materials Science and Engineering Volume: 206 Article Number: UNSP 012089 Published: 2017 2. Catalytic photodegradation of pharmaceuticals - homogeneous and heterogeneous photocatalysis By: Klementova, S.; Kahoun, D.; Doubkova, L.; et al. Conference: 9th European Meeting on Solar Chemistry and Photocatalysis - Environmental Applications (SPEA) Location: Strasbourg, FRANCE Date: JUN 13-17, 2016 Sponsor(s): Inst Chem & Proc Energy, Environm & Hlth; French Natl Ctr Sci Res; Univ Strasbourg PHOTOCHEMICAL & PHOTOBIOLOGICAL SCIENCES Volume: 16 Issue: 1 Pages: 67-71 Published: JAN 1 2017 Antibacterial effect of silver modified TiO2/PECVD films By: Hajkova, P.; Spatenka, P.; Krumeich, J.; et al. EUROPEAN PHYSICAL JOURNAL D Volume: 54 Issue: 2 Pages: 189-193 Published: AUG 2009 citováno v: 1. Microstructure and antibacterial activity of ions (Ce, Y, or B)-doped Zn-TiO2: a comparative study By: Wang, Y. Z.; Wu, Y. S.; Xue, X. X.; et al. MATERIALS TECHNOLOGY Volume: 32 Issue: 5 Pages: 310-320 Published: 2017 The Influence of Surface Treatment on Photocatalytic Activity of PE CVD TiO2 Thin Films By: Hajkova, Pavlina; Spatenka, Petr; Krumeich, Joerg; et al. Conference: 11th International Conference on Plasma Surface Engineering Location: Garmisch Partenkirchen, GERMANY Date: SEP 15-19, 2008 Sponsor(s): European Joint Comm Plasma & Ion Surface Engn PLASMA PROCESSES AND POLYMERS Volume: 6 Supplement: S Pages: S735-S740 Published: 2009 citováno v: 1. Deposition of homogeneous carbon-TiO2 composites by atmospheric pressure DBD By: Brunet, Paul; Rincon, Rocio; Margot, Joelle; et al. PLASMA PROCESSES AND POLYMERS Volume: 14 Issue: 7 Article Number: e1600075 Published: JUL 2017 2. TiO2-based Photocatalysis: Toward Visible Light-Responsive Photocatalysts Through Doping and Fabrication of Carbon-Based Nanocomposites By: Kuvarega, Alex T.; Mamba, Bhekie B. CRITICAL

REVIEWS IN SOLID STATE AND MATERIALS SCIENCES Volume: 42 Issue: 4 Pages: 295-346 Published: 2017 Photocatalytic Effect of TiO(2) Films on Viruses and Bacteria By: Hajkova, Pavlina; Spatenka, Petr; Horsky, Jan; et al. PLASMA PROCESSES AND POLYMERS Volume: 4 Special Issue: 1 Pages: S397-S401 Published: APR 2007 citováno v: 1. Stabilization of TiO2 Sols Dispersity at Physiological Conditions and Decrease Their Cytotoxic Properties By: Shikina, Nadezhda V.; Bessudnova, Elena V.; Ryabchikova, Elena I.; et al. JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY Volume: 17 Issue: 12 Pages: 9312-9321 Published: DEC 2017 2. Using Photocatalyst Metal Oxides as Antimicrobial Surface Coatings to Ensure Food Safety-Opportunities and Challenges By: Yemmireddy, Veerachandra K.; Hung, Yen-Con COMPREHENSIVE REVIEWS IN FOOD SCIENCE AND FOOD SAFETY Volume: 16 Issue: 4 Pages: 617-631 Published: JUL 2017 3. Sol-Gel-Assisted Microwave-Derived Synthesis of Anatase Ag/TiO2/GO Nanohybrids toward Efficient Visible Light Phenol Degradation By: Alsharaeh, E. H.; Bora, T.; Soliman, A.; et al. CATALYSTS Volume: 7 Issue: 5 Article Number: 133 Published: MAY 2017 4. The effect of thermal annealing on Fe/TiO2 coatings deposited with the help of RF PECVD method. Part I. Chemical and phase composition By: Sobczyk-Guzenda, Anna; Owczarek, Slawomir; Batory, Damian; et al. CERAMICS INTERNATIONAL Volume: 43 Issue: 5 Pages: 3993-4004 Published: APR 1 2017 5. Effect of Tio(2) Nanoparticles on the Antibacterial and Physical Properties of Low-Density Polyethylene Film By: Hashemabad, Zeinab Noori; Shabanpour, Bahareh; Azizi, Hamed; et al. POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING Volume: 56 Issue: 14 Pages: 1516-1527 Published: 2017 Photocatalytic TiO(2) thin Film Prepared by PE CVD at low Temperature By: Kolouch, Ales; Hajkova, Pavlina; Mackova, Anna; et al. PLASMA PROCESSES AND POLYMERS Volume: 4 Special Issue: 1 Pages: S350-S355 Published: APR 2007 citzováno v:) 1. Low-temperature fabrication of TiO2 film on flexible substrate by atmospheric roll-to-roll CVD By: Jagadeesan, Srikanth; Doh, Yang Hoi; Choi, Kyung-Hyun JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH Volume: 14 Issue: 3 Pages: 701-708 Published: MAY 2017 2. Photon-induced interfacial charge transfer mechanism of porous silicon/TiO2 nanoparticles for photoelectrochemical performance By: Shao, Zhufeng; Yang, Xiujuan; Zhu, Ge; et al. JOURNAL OF PHOTOCHEMISTRY AND PHOTOBIOLOGY A-CHEMISTRY Volume: 338 Pages: 72-84 Published: APR 1 2017 Static Recrystallization of Cold Rolled Intermetallic Fe17Al4Cr0.3Zr Alloy By: Kratochvil, P.; Schindler, I.; Hanus, P.; et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE Volume: 21 Issue: 9 Pages: 1932-1936 Published: SEP 2012 citováno v: 1. Kinetics of static recrystallization in the coarse-grained Fe-40 at.%Al-Zr-B alloy By: Schindler, Ivo; Kopecek, Jaromir; Kawulok, Petr; et al. ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING Volume: 17 Issue: 4 Pages: 816-826 Published: SEP 2017 Mechanical properties of a forged Fe-25Al-2Ta steam turbine blade By: Hanus, P.; Bartsch, E.; Palm, M.; et al. Conference: 5th Discussion Meeting on the Development of Innovative Iron Aluminium Alloys Location: Charles Univ, Fac Math & Phys, Prague, CZECH REPUBLIC Date: SEP 21-24, 2009 INTERMETALLICS Volume: 18 Issue: 7 Special Issue: SI Pages: 1379-1384 Published: JUL 2010 citováno v:

1. Hot forming of complex surface of hollow blade back arc based on drawing process By: Xiang, Rong; Zhou, Jie; Xiong, Yu; et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY Volume: 93 Issue: 9-12 Pages: 4015-4021 Published: DEC 2017 2. Impact toughness transition temperature of ferritic Fe-Al-V alloy with strengthening Fe2AlV precipitates By: Ferreiros, P. A.; Alonso, P. R.; Gomez, G. R.; et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING Volume: 706 Pages: 136-141 Published: OCT 26 2017 3. Solidification Reaction Sequence of Co-Rich Nb-Al-Co Alloys By: Feitosa, L. M.; D'Souza, N.; West, G. D.; et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE Volume: 48A Issue: 8 Pages: 3814-3822 Published: AUG 2017 Hot Rolling and Deformation Behavior of Fe17Al4Cr0.3Zr Alloy By: Schindler, Ivo; Kratochvil, Petr; Hanus, Pavel; et al. HIGH TEMPERATURE MATERIALS AND PROCESSES Volume: 29 Issue: 1-2 Pages: 19-25 Published: 2010 citováno v: 1. Kinetics of static recrystallization in the coarse-grained Fe-40 at.%Al-Zr-B alloy By: Schindler, Ivo; Kopecek, Jaromir; Kawulok, Petr; et al. ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING Volume: 17 Issue: 4 Pages: 816-826 Published: SEP 2017 Creep behaviour of intermetallic Fe-28Al-3Cr alloy with Ce addition By: Kratochvil, P; Pesicka, J; Hakl, J; Hanus, P. l. Conference: 9th International Symposium on Physics of Materials Location: Charles Univ, Fac Math & Phys, Prague, CZECH REPUBLIC Date: SEP 01-04, 2003 Sponsor(s): Charles Univ, Dept Met Phys JOURNAL OF ALLOYS AND COMPOUNDS Volume: 378 Issue: 1-2 Pages: 258-262 Published: SEP 22 2004 citováno v: 1. MICROSTRUCTURE AND OXIDATION RESISTANCE OF Fe-Al-Nb ALLOYED LAYER ON 45 STEEL BY PLASMA SURFACE MODIFICATION By: Zhang, Zelei; Yao, Zhengjun SURFACE REVIEW AND LETTERS Volume: 24 Issue: 3 Article Number: 1750035 Published: APR 2017 The effect of Zr on high-temperature oxidation behaviour of Fe3Al-based alloys By: Hotar, A.; Kejzlar, P.; Palm, M.; et al. CORROSION SCIENCE Volume: 100 Pages: 147-157 Published: NOV 2015 citováno v: 1. Study of the effects of Zr addition on the microstructure and properties of Nb-Ti-Si based ultrahigh temperature alloys By: Qiao, Yanqiang; Guo, Xiping; Zeng, Yuxiang INTERMETALLICS Volume: 88 Pages: 19-27 Published: SEP 2017 2. Microstructural strengthening by phase transformation in Al-Fe3Al composites By: Shahid, R. N.; Scudino, S. JOURNAL OF ALLOYS AND COMPOUNDS Volume: 705 Pages: 590-597 Published: MAY 25 2017 High-temperature oxidation behaviour of Zr alloyed Fe3Al-type iron aluminide By: Hotar, A.; Palm, M.; Kratochvil, P.; et al. CORROSION SCIENCE Volume: 63 Pages: 71-81 Published: OCT 2012 citováno v: 1. Mechanical properties and electronic structures of Fe-Al intermetallic By: Liu, YaHui; Chong, XiaoYu; Jiang, YeHua; et al. PHYSICA B-CONDENSED MATTER Volume: 506 Pages: 1-11 Published: FEB 1 2017 Effect of annealing temperature on the structural and magnetic properties of CTAB-capped SrFe12O19 platelets By:Harikrishnan, V (Harikrishnan, V.)[ 1 ] ; Saravanan, P (Saravanan, P.)[ 2 ] ; Vizhi, RE (Vizhi, R. Ezhil)[ 1 ] ; Babu, DR (Babu, D. Rajan)[ 1 ] ; Vinod, VTP (Vinod, V. T. P.)[ 3 ] ; Kejzlar, P (Kejzlar, Pavel)[ 3 ] ; Cernik, M (Cernik, Miroslav)[ 3 ] View ResearcherID and ORCID JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS Volume: 401 Pages: 775-783 DOI: 10.1016/j.jmmm.2015.10.122 Published: MAR 1 2016

citováno v: 1. Magnetization reversal and interactions in SrFe12O19 By: Cristina Faloh-Gandarilla, Jael; Diaz-Castanon, Sergio; Watts, Bernard Enrico Conference: International Conference on Terahertz Emission, Metamaterials and Nanophotonics (TERAMETANANO) Location: Cartagena de Indias, COLOMBIA Date: APR 03-10, 2016 PHYSICA STATUS SOLIDI B-BASIC SOLID STATE PHYSICS Volume: 254 Issue: 4 Article Number: UNSP 1600393 Published: APR 2017 2. Structural and properties of hydrothermally synthesised M-type hexaferrites By: Zhang, Cong; Liu, Xiansong; Rehman, Khalid Mehmood Ur; et al. JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS Volume: 28 Issue: 6 Pages: 4593-4597 BARKHAUSEN NOISE EMISSION IN HARD MILLED SURFACES OF STEEL C55 By: Neslusan, Miroslav; Majerik, Jozef; Kejzlar, Pavel; et al. TRANSACTIONS OF FAMENA Volume: 39 Issue: 4 Pages: 55-64 Published: 2016 1. USING THE BARKHAUSEN-NOISE ANALYSIS AND METAL-MAGNETIC-MEMORY METHOD FOR MATERIAL CHARACTERISTICS UNDER FATIGUE DAMAGE By: Kolarik, Kamil; Simecek, Jiri; Kriz, Antonin; et al. MATERIALI IN TEHNOLOGIJE Volume: 51 Issue: 3 Pages: 437-441 Published: MAY-JUN 2017 The effect of Zr on high-temperature oxidation behaviour of Fe3Al-based alloys By: Hotar, A.; Kejzlar, P.; Palm, M.; et al. CORROSION SCIENCE Volume: 100 Pages: 147-157 Published: NOV 2015 citováno v: 1. Study of the effects of Zr addition on the microstructure and properties of Nb-Ti-Si based ultrahigh temperature alloys By: Qiao, Yanqiang; Guo, Xiping; Zeng, Yuxiang INTERMETALLICS Volume: 88 Pages: 19-27 Published: SEP 2017 2. Microstructural strengthening by phase transformation in Al-Fe3Al composites By: Shahid, R. N.; Scudino, S. JOURNAL OF ALLOYS AND COMPOUNDS Volume: 705 Pages: 590-597 Published: MAY 25 2017 The effect of Zr addition on the structure and high temperature strength of Fe-30 at.% Al type alloys By: Kratochvil, Petr; Kejzlar, Pavel; Kral, Robert; et al. INTERMETALLICS Volume: 20 Issue: 1 Pages: 39-46 Published: JAN 2012 citováno v: 1. Microstructure and mechanical properties of a Fe-28%Al-5%Cr-1%Nb-2%B alloy fabricated by Laser Engineered Net Shaping By: Lazinska, M.; Durejko, T.; Zasada, D.; et al. MATERIALS LETTERS Volume: 196 Pages: 87-90 Published: JUN 1 2017 2. Laser additive manufacturing of iron aluminides strengthened by ordering, borides or coherent Heusler phase By: Michalcova, Alena; Sencekova, Lucia; Rolink, Gesa; et al. MATERIALS & DESIGN Volume: 116 Pages: 481-494 Published: FEB 15 2017 Mechanical properties of basalt filaments By: Militky, Jiri; Kovacic, Vladimir; Bajzik, Vladimir Conference: 5th Central European Conference on Fibre-Grade Polymers, Chemical Fibres and Special Textiles Location: warsaw, POLAND Date: FEB 09, 2007 FIBRES & TEXTILES IN EASTERN EUROPE Volume: 15 Issue: 5-6 Pages: 49-53 Published: JAN-DEC 2007 citováno v: 1. Role of Nanofillers on Mechanical and Dry sliding Wear Behavior of Basalt-Epoxy Nanocomposites By: Mahesha, C. R.; Shivarudraiah; Mohan, N.; et al. Conference: International Conference on Advancements in Aeromechanical Materials for Manufacturing (ICAAMM) Location: MLR Inst Technol, Hyderabad, INDIA Date: 2016 MATERIALS TODAY-PROCEEDINGS Volume: 4 Issue: 8 Pages: 8192-8199 Published: 2017 2. Thermal Stability and Physical Properties of Epoxy Composite Reinforced with Silane Treated Basalt Fiber By: Lee, Jung Jin; Nam, Inwoo; Kim, Hodong FIBERS AND POLYMERS Volume: 18 Issue: 1 Pages: 140-147 Published: JAN 2017

3. A Novel and Sustainable Application of Basalt Fibers for Strengthening Unreinforced Masonry Walls By: Quagliarini, E.; Scalbi, A.; Monni, F.; et al. JOURNAL OF NATURAL FIBERS Volume: 14 Issue: 1 Pages: 97-111 Published: 2017 Phase morphology of polypropylene-polyethylene terephthalate blend fibres By: Kormendy, E; Marcincin, A; Hricova, M; Kovacic, V. FIBRES & TEXTILES IN EASTERN EUROPE Volume: 13 Issue: 1 Pages: 20-23 Published: JAN-MAR 2005 citováno v: 1. Effect of a Compatibilizer on the Morphology and Properties of Polypropylene/Polyethylentherephthalate Spun Fibers By: La Mantia, Francesco Paolo; Ceraulo, Manuela; Giacchi, Gaia; et al. POLYMERS Volume: 9 Issue: 2 Article Number: 47 Published: FEB 2017 Influence of thermal treatment on tensile failure of basalt fibers By: Militky, J; Kovacic, V; Rubnerova, J ENGINEERING FRACTURE MECHANICS Volume: 69 Issue: 9 Pages: 1025-1033 Article Number: PII S0013-7944(01)00119-9 Published: JUN 2002 citováno v: 1. Chemical durability and performance of modified basalt fiber in concrete medium By: Afroz, Mahzabin; Patnaikuni, Indubhushan; Venkatesan, Srikanth CONSTRUCTION AND BUILDING MATERIALS Volume: 154 Pages: 191-203 Published: NOV 15 2017 2. Thermoluminescence behavior of basaltic rocks collected in southeastern region of Turkey By: Toktamis, Dilek; Toktamis, Huseyin; Yazici, A. Necmeddin APPLIED RADIATION AND ISOTOPES Volume: 121 Pages: 109-115 Published: MAR 2017 3. Thermal Stability and Physical Properties of Epoxy Composite Reinforced with Silane Treated Basalt Fiber By: Lee, Jung Jin; Nam, Inwoo; Kim, Hodong FIBERS AND POLYMERS Volume: 18 Issue: 1 Pages: 140-147 Published: JAN 2017 4. A Novel and Sustainable Application of Basalt Fibers for Strengthening Unreinforced Masonry Walls By: Quagliarini, E.; Scalbi, A.; Monni, F.; et al. JOURNAL OF NATURAL FIBERS Volume: 14 Issue: 1 Pages: 97-111 Published: 2017 5. Basalt: structural insight as a construction material By: Raj, Smriti; Kumar, V. Ramesh; Kumar, B. H. Bharath; et al. SADHANA-ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES Volume: 42 Issue: 1 Pages: 75-84 Ultimate mechanical properties of basalt filaments By: Militky, J; Kovacic, V Conference: Conference on Advances in Fiber, Textile and Nonwovens Science and Technology Location: PRINCETON, NJ Date: 1995 TEXTILE RESEARCH JOURNAL Volume: 66 Issue: 4 Pages: 225-229 Published: APR 1996 citováno v: 1. Elastic recovery of polyamide 6 matrix nanocomposites and their basalt fiber co-reinforced hybrids By: Meszaros, Laszlo E-POLYMERS Volume: 17 Issue: 5 Pages: 349-354 Published: SEP 2017 2. Improving the tensile strength of continuous basalt fiber by mixing basalts By: Chen, Xingfen; Zhang, Yunsheng; Huo, Haibin; et al. FIBERS AND POLYMERS Volume: 18 Issue: 9 Pages: 1796-1803 Published: SEP 2017 3. Measuring opto-thermal parameters of basalt fibers using digital holographic microscopy By: Yassien, Khaled M.; Agour, Mostafa MICROSCOPY RESEARCH AND TECHNIQUE Volume: 80 Issue: 2 Pages: 211-219 Published: FEB 2017 Composites Base on Geopolymer Matrices: Preliminary Fabrication, Mechanical Properties and Future Applications By: Hung, T. D.; Pernica, D.; Kroisova, D.; et al. Edited by: Tunkasiri, T Conference: International Conference on Smart Materials-Smart/Intelligent Materials and Nanotechnology/2nd Int Workshop on Functional Materials and Nanomaterials Location: Chiang Mai, THAILAND Date: APR 22-25, 2008 Sponsor(s): USCB, ICMR; NSTDA; NECTEC; MTEC; TRF; QES; Coax Grp Corp Ltd SMART MATERIALS Book Series: Advanced Materials Research Volume: 55-57 Pages: 477-+ Published: 2008

citováno v: 1. Fabrication, microstructural and mechanical characterization of Luffa Cylindrical Fibre - Reinforced geopolymer composite By: Alshaaer, Mazen; Abu Mallouh, Saida; Al-Kafawein, Juma'a; et al. APPLIED CLAY SCIENCE Volume: 143 Pages: 125-133 Published: JUL 2017 The application potential of SiO2, TiO2 or Ag nanoparticles as fillers in machining process fluids By: Bakalova, Totka; Svobodova, Lucie; Rosicka, Petra; et al. JOURNAL OF CLEANER PRODUCTION Volume: 142 Pages: 2237-2243 Part: 4 Published: JAN 20 2017 citováno v: 1. Optimization of Cutting Parameters for Surface Roughness under MQL, using Al2O3 Nanolubricant, during Turning of Inconel 718 By: Ali, M. A. M.; Khalil, A. N. M.; Azmi, A. I.; et al. Conference: International Research and Innovation Summit (IRIS) Location: Melaka, MALAYSIA Date: MAY 06-07, 2017 Sponsor(s): Univ Tun Hussein Onn Malaysia INTERNATIONAL RESEARCH AND INNOVATION SUMMIT (IRIS2017) Book Series: IOP Conference Series-Materials Science and Engineering Volume: 226 Article Number: UNSP 012067 Published: 2017 Mechanical characterization of a-C:H:SiOx coatings synthesized using radio-frequency plasma-assisted chemical vapor deposition method By: Batory, D.; Jedrzejczak, A.; Szymanski, W.; Louda, P.; et al. THIN SOLID FILMS Volume: 590 Pages: 299-305 Published: SEP 1 2015 citováno v: 1. Compositionally modulated multilayer diamond-like carbon coatings with AlTiSi multi-doping by reactive high power impulse magnetron sputtering By: Dai, Wei; Gao, Xiang; Liu, Jingmao; et al. APPLIED SURFACE SCIENCE Volume: 425 Pages: 855-861 Published: DEC 15 2017 2. Carbon coatings with high concentrations of silicon deposited by RF PECVD method at relatively high self-bias By: Jedrzejczak, A.; Batory, D.; Dominik, M.; et al. SURFACE & COATINGS TECHNOLOGY Volume: 329 Pages: 212-217 Published: NOV 25 2017 3. Achieving low friction and wear under various humidity conditions by co-doping nitrogen and silicon into diamond-like carbon films By: Chen, Teng; Wu, Xingyang; Ge, Zhou; et al. THIN SOLID FILMS Volume: 638 Pages: 375-382 Published: SEP 30 2017 4. Mechanical properties, chemical analysis and evaluation of antimicrobial response of Si-DLC coatings fabricated on AISI 316 LVM substrate by a multi-target DC-RF magnetron sputtering method for potential biomedical applications By: Bociaga, Dorota; Sobczyk-Guzenda, Anna; Szymanski, Witold; et al. Conference: 10th International Conference on Photo-Excited Processes and Applications (ICPEPA) Location: Transilvania Univ Brasov, Brasov, ROMANIA Date: AUG 29-SEP 02, 2016 APPLIED SURFACE SCIENCE Volume: 417 Special Issue: SI Pages: 23-33 Published: SEP 30 2017 5. Friction and wear of a-C:H:SiOx coatings in combination with AISI 316L and ZrO2 counterbodies By: Jedrzejczak, A.; Kolodziejczyk, L.; Szymanski, W.; et al. TRIBOLOGY INTERNATIONAL Volume: 112 Pages: 155-162 Published: AUG 2017 6. SiOx containing diamond like carbon coatings: Effect of substrate bias during deposition By: Barve, S. A.; Chopade, S. S.; Kar, R.; et al. DIAMOND AND RELATED MATERIALS Volume: 71 Pages: 63-72 Published: JAN 2017 A Model of the Dynamic Error as a Measurement Result of Instruments Defining the Parameters of Moving Objects By: Dichev, D.; Koev, H.; Bakalova, T.; et al. MEASUREMENT SCIENCE REVIEW Volume: 14 Issue: 4 Pages: 183-189 Published: AUG 2014 citováno v: 1. Dynamic measurement errors prediction for sensors based on firefly algorithm optimize support vector machine By: Jiang, Minlan; Jiang, Lan; Jiang, Dingde; et al. SUSTAINABLE CITIES AND SOCIETY Volume: 35 Pages: 250-256 Published: NOV 2017

Mechanical, tribological and corrosion properties of CrBN films deposited by combined direct current and radio frequency magnetron sputtering By: Jahodova, Vera; Ding, Xing-zhao; Seng, Debbie H. L.; LOUDA, P. et al. Conference: International Conference on Technological Advances of Thin Films & Surface Coatings Location: Singapore, SINGAPORE Date: JUL 15-17, 2012 THIN SOLID FILMS Volume: 544 Pages: 335-340 Published: OCT 1 2013 citováno v: 1. An investigation on the crack resistance of CrN, CrBN and CrTiBN coatings via nanoindentation By: Wang, Qianzhi; Zhou, Fei; Zhou, Zhifeng; et al. VACUUM Volume: 145 Pages: 186-193 Published: NOV 2017 2. Study on the crack resistance of CrBN composite coatings via nano-indentation and scratch tests By: Wang, Qianzhi; Zhou, Fei; Callisti, Mauro; et al. JOURNAL OF ALLOYS AND COMPOUNDS Volume: 708 Pages: 1103-1109 Published: JUN 25 2017 Effect of test conditions on the bending strength of a geopolymer-reinforced composite By: Pernica, D.; Reis, P. N. B.; Ferreira, J. A. M.; Louda, P. et al. JOURNAL OF MATERIALS SCIENCE Volume: 45 Issue: 3 Pages: 744-749 Published: FEB 2010 citováno v: 1. Effects of SiC particle size on electrochemical and mechanical behavior of SiC-based refractory coatings By: Khosravanihaghighi, A.; Pakshi, M. JOURNAL OF THE AUSTRALIAN CERAMIC SOCIETY Volume: 53 Issue: 2 Pages: 909-915 Published: OCT 2017 2. Fly-Ash-Based Geopolymers: How the Addition of Recycled Glass or Red Mud Waste Influences the Structural and Mechanical Properties By: Toniolo, N.; Taveri, G.; Hurle, K.; et al. JOURNAL OF CERAMIC SCIENCE AND TECHNOLOGY Volume: 8 Issue: 3 Pages: 411-420 Published: SEP 2017 3. Fabrication, microstructural and mechanical characterization of Luffa Cylindrical Fibre - Reinforced geopolymer composite By: Alshaaer, Mazen; Abu Mallouh, Saida; Al-Kafawein, Juma'a; et al. APPLIED CLAY SCIENCE Volume: 143 Pages: 125-133 Published: JUL 2017 4. Geopolymer reinforced with E-glass leno weaves By: Sankar, Kaushik; Kriven, Waltraud M. JOURNAL OF THE AMERICAN CERAMIC SOCIETY Volume: 100 Issue: 6 Pages: 2492-2501 Published: JUN 2017 Composites Base on Geopolymer Matrices: Preliminary Fabrication, Mechanical Properties and Future Applications By: Hung, T. D.; Pernica, D.; Kroisova, D.; et al. Edited by: Tunkasiri, T Conference: International Conference on Smart Materials-Smart/Intelligent Materials and Nanotechnology/2nd Int Workshop on Functional Materials and Nanomaterials Location: Chiang Mai, THAILAND Date: APR 22-25, 2008 Sponsor(s): USCB, ICMR; NSTDA; NECTEC; MTEC; TRF; QES; Coax Grp Corp Ltd SMART MATERIALS Book Series: Advanced Materials Research Volume: 55-57 Pages: 477-+ Published: 2008 citováno v: 1. Fabrication, microstructural and mechanical characterization of Luffa Cylindrical Fibre - Reinforced geopolymer composite By: Alshaaer, Mazen; Abu Mallouh, Saida; Al-Kafawein, Juma'a; et al. APPLIED CLAY SCIENCE Volume: 143 Pages: 125-133 Published: JUL 2017 Interactions between carbon coatings and tissue By: Mitura, Katarzyna; Niedzielski, Piotr; Bartosz, Grzegorz; Mitura, Stanislw, et al. Conference: Symposium on Thin Film and Nanostructured Materials for Photovoltaics held at the 2005 EMRS Meeting Location: Strasbourg, FRANCE Date: MAY 31-JUN 03, 2005 Sponsor(s): EMRS SURFACE & COATINGS TECHNOLOGY Volume: 201 Issue: 6 Pages: 2117-2123 Published: DEC 4 2006 citováno v: 1. Carbon coatings with high concentrations of silicon deposited by RF PECVD method at relatively high self-bias By: Jedrzejczak, A.; Batory, D.; Dominik, M.; et al. SURFACE & COATINGS TECHNOLOGY Volume: 329 Pages: 212-217 Published: NOV 25 2017

2. Biokinetics and tissue response to ultrananocrystalline diamond nanoparticles employed as coating for biomedical devices By: Tasat, Deborah R.; Bruno, Marcos E.; Domingo, Mariela; et al. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS Volume: 105 Issue: 8 Pages: 2408-2415 Published: NOV 2017 Bio-compatible low reflective coatings for surgical tools using reactive d.c.-magnetron sputtering and are evaporation - a comparison regarding steam sterilization resistance and nickel diffusion By: Hollstein, F; Louda, P Conference: 26th International Conference on Metallurgical Coating and Thin Films Location: SAN DIEGO, CALIFORNIA Date: APR 12-15, 1999 Sponsor(s): Div Amer Vacuum Soc, Vacuum Metallurgy & Thin Films SURFACE & COATINGS TECHNOLOGY Volume: 120 Pages: 672-681 Published: NOV 1999 citováno v: 1. Black oxide conversion coating on metals: A review of coating techniques and adaptation for SAE 420A surgical grade stainless steel By: Reghuraj, A. R.; Saju, K. K. Conference: International Conference on Recent Trends in Engineering and Material Sciences (ICEMS) Location: Jaipur, INDIA Date: MAR 17-19, 2016 MATERIALS TODAY-PROCEEDINGS Volume: 4 Issue: 9 Pages: 9534-9541 Published: 2017 Influence of carbon coatings origin on the properties important for biomedical application By: Mitura, S; Niedzielski, P; Jachowicz, D; et al. DIAMOND AND RELATED MATERIALS Volume: 5 Issue: 10 Pages: 1185-1188 Published: AUG 1996 citováno v: 1. Biokinetics and tissue response to ultrananocrystalline diamond nanoparticles employed as coating for biomedical devices By: Tasat, Deborah R.; Bruno, Marcos E.; Domingo, Mariela; et al. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS Volume: 105 Issue: 8 Pages: 2408-2415 Published: NOV 2017 DIAMOND-LIKE CARBON COATINGS FOR BIOMEDICAL APPLICATIONS By: MITURA, E; MITURA, S; NIEDZIELSKI, P;LOUDA, P. et al. Conference: 4th European Conference on Diamond, Diamond-like and Related Materials (Diamond Films 93) Location: ALBUFEIRA, PORTUGAL Date: SEP 20-24, 1993 Sponsor(s): AEA TECHNOL, SURF TECHNOL, HARWELL LAB; ASTEX; COMMISS EUROPEAN COMMUNITIES; DG TEER COATING SERV LTD; DIAMOND & RELATED MAT; DRUKKER INT BV; GENASYSTEMS INC; KOBE STEEL USA INC, ELECTR MAT CTR; NORTON DIAMOND FILM; RENISHHAW TRANSDUCER SYST LTD; US DEPT DEF DIAMOND AND RELATED MATERIALS Volume: 3 Issue: 4-6 Pages: 896-898 Published: APR 1994 citováno v: 1. CHARACTERISTICS OF CARBIDE INTERFACIAL LAYER FORMED DURING DEPOSITION OF DLC FILMS ON 316L STAINLESS STEEL SUBSTRATE By: Dudek, M. ARCHIVES OF METALLURGY AND MATERIALS Volume: 62 Issue: 4 Pages: 2211-2216 Published: DEC 2017 Nanostructured Diamond Device for Biomedical Applications By: Fijalkowski, M.; Karczemska, A.; Lysko, J. M.; Mitura, S.;et al. JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY Volume: 15 Issue: 2 Pages: 1006-1013 Published: FEB 2015 citováno v: 1. Pulsed Bessel beam-induced microchannels on a diamond surface for versatile microfluidic and sensing applications By: Jedrkiewicz, Ottavia; Kumar, Sanjeev; Sotillo, Belen; et al. OPTICAL MATERIALS EXPRESS Volume: 7 Issue: 6 Pages: 1962-1970 Published: JUN 1 2017 Angiosarcoma of the scalp: a case report By:Wittych, J (Wittych, Justyna)[ 1 ] ; Banatkiewicz, P (Banatkiewicz, Pawel)[ 2 ] ; Wachowicz, M (Wachowicz, Marta)[ 1 ] ; Pruska-Pich, D (Pruska-Pich, Dorota)[ 1 ] ; Mitura, S (Mitura, Stanislaw)[ 3 ] ; Gisterek, I (Gisterek, Iwona)[ 2,3 ] View ResearcherID

and ORCID JOURNAL OF CONTEMPORARY BRACHYTHERAPY Volume: 6 Issue: 2 Pages: 208-212 DOI: 10.5114/jcb.2014.43183 citováno v: 1. Helical Tomotherapy (R) is a safe and feasible technique for total scalp irradiation By: Cuccia, Francesco; Figlia, Vanessa; Palmeri, Antonella; et al. RARE TUMORS Volume: 9 Issue: 1 Pages: 7-8 Published: 2017 Visualisation of Morphological Interaction of Diamond and Silver Nanoparticles with Salmonella Enteritidis and Listeria Monocytogenes By: Sawosz, Ewa; Chwalibog, Andre; Mitura, Katarzyna; Mitura, Stanislaw et al. JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY Volume: 11 Issue: 9 Pages: 7635-7641 Published: SEP 2011 citováno v: 1. Does nanobiotechnology create new tools to combat microorganisms? By: Zielinska-Gorska, Marlena K.; Sawosz, Ewa; Gorski, Konrad; et al. NANOTECHNOLOGY REVIEWS Volume: 6 Issue: 2 Pages: 171-189 Published: APR 2017 Visualization of interaction between inorganic nanoparticles and bacteria or fungi By:Chwalibog, A (Chwalibog, Andre)[ 1 ] ; Sawosz, E (Sawosz, Ewa)[ 2 ] ; Hotowy, A (Hotowy, Anna); Szeliga, J (Szeliga, Jacek)[ 2 ] ; Mitura, S (Mitura, Stanislaw)[ 3 ] ; Mitura, K (Mitura, Katarzyna)[ 3 ] ; Grodzik, M (Grodzik, Marta)[ 2 ] ; Orlowski, P (Orlowski, Piotr)[ 2 ] ; Sokolowska, A (Sokolowska, Aleksandra)[ 4 ] View ResearcherID and ORCID INTERNATIONAL JOURNAL OF NANOMEDICINE Volume: 5 Pages: 1085-1094 DOI: 10.2147/IJN.S13532 Published: 2010 citováno v: 1. Does nanobiotechnology create new tools to combat microorganisms? By: Zielinska-Gorska, Marlena K.; Sawosz, Ewa; Gorski, Konrad; et al. NANOTECHNOLOGY REVIEWS Volume: 6 Issue: 2 Pages: 171-189 Published: APR 2017 Investigation of anti-corrosion properties of Ti : C gradient layers manufactured in hybrid deposition system By:Batory, D (Batory, D.)[ 1 ] ; Blaszczyk, T (Blaszczyk, T.)[ 2 ] ; Clapa, M (Clapa, M.)[ 1 ] ; Mitura, S (Mitura, S.)[ 1 ] View ResearcherID and ORCID JOURNAL OF MATERIALS SCIENCE Volume: 43 Issue: 10 Pages: 3385-3391 DOI: 10.1007/s10853-007-2393-0 Published: MAY 2008 citováno v: 1. Friction and wear of a-C:H:SiOx coatings in combination with AISI 316L and ZrO2 counterbodies By: Jedrzejczak, A.; Kolodziejczyk, L.; Szymanski, W.; et al. TRIBOLOGY INTERNATIONAL Volume: 112 Pages: 155-162 Published: AUG 2017 Raman spectroscopy studies of meteoritic diamonds By: Karczemska, A.; Kozanecki, M.; Szurgot, M.;Mitura, S. et al. Conference: 17th European Conference on Diamond, Diamond-Like Materials, Carbon Nanotubes, Nitrides and Silicon Carbide Location: Estoril, PORTUGAL Date: SEP 03-08, 2006 Sponsor(s): AIXTRON AG; Elsevier Ltd; Iplas Innovat Plasma Syst GmbH; Lambda Technologies; Seki Technotron Corp DIAMOND AND RELATED MATERIALS Volume: 16 Issue: 4-7 Pages: 781-783 Published: APR-JUL 2007 citováno v: 1. Mapping the composition of chondritic meteorite Northwest Africa 3118 with micro-Raman spectroscopy By: Dall'Asen, Analia G.; Dimas, Sophia I.; Tyler, Sarah; et al. SPECTROSCOPY LETTERS Volume: 50 Issue: 8 Pages: 417-425 Published: 2017 Interactions between carbon coatings and tissue By:Mitura, K (Mitura, Katarzyna); Niedzielski, P (Niedzielski, Piotr); Bartosz, G (Bartosz, Grzegorz); Moll, J (Moll, Jacek); Walkowiak, B (Walkowiak, Bogdan); Pawlowska, Z (Pawlowska, Zofia); Louda, P (Louda, Petr); Kiec-Swierczynska, M (Kiec-Swierczynska, Marta); Mitura, S (Mitura, Stanislaw) View ResearcherID and ORCID SURFACE &

COATINGS TECHNOLOGY Volume: 201 Issue: 6 Pages: 2117-2123 DOI: 10.1016/j.surfcoat.2005.10.023 Published: DEC 4 2006 citováno v: 1. Carbon coatings with high concentrations of silicon deposited by RF PECVD method at relatively high self-bias By: Jedrzejczak, A.; Batory, D.; Dominik, M.; et al. SURFACE & COATINGS TECHNOLOGY Volume: 329 Pages: 212-217 Published: NOV 25 2017 TiN-NCD composite coating produced on the Ti6Al4V alloy for medical applications By:Sokolowska, A (Sokolowska, A); Rudnicki, J (Rudnicki, J); Niedzielski, P (Niedzielski, P); Boukowska, A (Boukowska, A); Boguslawski, G (Boguslawski, G); Wierzchon, T (Wierzchon, T); Mitura, S (Mitura, S) View ResearcherID and ORCID SURFACE & COATINGS TECHNOLOGY Volume: 200 Issue: 1-4 Pages: 87-89 DOI: 10.1016/j.surfcoat.2005.02.037 Published: OCT 1 2005 citováno v: 1. Clinical outcomes of ceramicized ball heads in total hip replacement bearings: a literature review By: Piconi, Corrado; De Santis, Vincenzo; Maccauro, Giulio JOURNAL OF APPLIED BIOMATERIALS & FUNCTIONAL MATERIALS Volume: 15 Issue: 1 Pages: E1-E9 Published: JAN-MAR 2017 Colour carbon coatings By: Clapa, M; Mitura, S; Niedzielski, P; et al. Conference: 11th European Conference on Diamond, Diamond-like Materials, Carbon Nanotubes, Nitrides and Silicon Carbide (Diamond 2000) Location: OPORTO, PORTUGAL Date: SEP 03-08, 2000 Sponsor(s): De Beers Ind Diamonds (UK) Ltd; GFD Gesell Diamantprod mbH; Philips Res Labs; Elsevier Sci DIAMOND AND RELATED MATERIALS Volume: 10 Issue: 3-7 Special Issue: SI Pages: 1121-1124 Published: MAR-JUL 2001 citováno v: 1. Deposition of diamond-like carbon thin films by the high power impulse magnetron sputtering method By: Wiatrowski, A.; Kijaszek, W.; Posadowski, W. M.; et al. DIAMOND AND RELATED MATERIALS Volume: 72 Pages: 71-76 Published: FEB 2017 Nanocrystalline diamond coatings By: Mitura, S; Mitura, A; Niedzielski, P; et al. CHAOS SOLITONS & FRACTALS Volume: 10 Issue: 12 Pages: 2165-2176 Published: DEC 1999 citováno v: 1. CHARACTERISTICS OF CARBIDE INTERFACIAL LAYER FORMED DURING DEPOSITION OF DLC FILMS ON 316L STAINLESS STEEL SUBSTRATE By: Dudek, M. ARCHIVES OF METALLURGY AND MATERIALS Volume: 62 Issue: 4 Pages: 2211-2216 Published: DEC 2017 2. Carbon coatings with high concentrations of silicon deposited by RF PECVD method at relatively high self-bias By: Jedrzejczak, A.; Batory, D.; Dominik, M.; et al. SURFACE & COATINGS TECHNOLOGY Volume: 329 Pages: 212-217 Published: NOV 25 2017 Influence of carbon coatings origin on the properties important for biomedical application By: Mitura, S; Niedzielski, P; Jachowicz, D; et al. DIAMOND AND RELATED MATERIALS Volume: 5 Issue: 10 Pages: 1185-1188 Published: AUG 1996 citováno v: 1. Biokinetics and tissue response to ultrananocrystalline diamond nanoparticles employed as coating for biomedical devices By: Tasat, Deborah R.; Bruno, Marcos E.; Domingo, Mariela; et al. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS Volume: 105 Issue: 8 Pages: 2408-2415 Published: NOV 2017 THE CORROSION TESTS OF AMORPHOUS-CARBON COATINGS DEPOSITED BY RF DENSE-PLASMA ONTO STEEL WITH DIFFERENT CHROMIUM CONTENTS By: COUVRAT, P; DENIS, M; LANGER, M; MITURA, S.et al. DIAMOND AND RELATED MATERIALS Volume: 4 Issue: 11 Pages: 1251-1254 Published: OCT 1995 citováno v:

1. High-performance hybrid coatings based on diamond-like carbon and copper for carbon steel protection By: Khamseh, Sara; Alibakhshi, Eiman; Mahdavian, Mohammad; et al. DIAMOND AND RELATED MATERIALS Volume: 80 Pages: 84-92 Published: NOV 2017 MANUFACTURE OF AMORPHOUS-CARBON LAYERS BY RF DENSE-PLASMA CVD By: MITURA, S; MITURA, E; MITURA, A Conference: 5th European Conference on Diamond, Diamond-Like and Related Materials (Diamond Films 94) Location: IL CIOCCO, ITALY Date: SEP 25-30, 1994 DIAMOND AND RELATED MATERIALS Volume: 4 Issue: 4 Pages: 302-303 Published: APR 15 1995 citováno v: 1. Advanced characterization of by-product carbon film obtained by thermal chemical vapor deposition during CNT manufacturing By: Trompeta, Aikaterini-Flora A.; Koumoulos, Elias P.; Kartsonakis, Ioannis A.; et al. MANUFACTURING REVIEW Volume: 4 Article Number: 7 Published: JUN 2 2017 STRUCTURE ORIGINS OF DIFFRACTION PATTERN FEATURES OF DIAMOND-LIKE FILMS By: PILANKIEWICZ, EA; MITURA, S Conference: DIAMOND 92 - 3RD INTERNATIONAL CONF ON THE NEW DIAMOND SCIENCE AND TECHNOLOGY / 3RD EUROPEAN CONF ON DIAMOND, DIAMOND-LIKE AND RELATED COMPOUNDS Location: HEIDELBERG, GERMANY Date: AUG 31-SEP 04, 1992 Sponsor(s): NORTON DIAMOND FILM, NORTHBORO RES CTR; DIAMOND & RELATED MAT; MONSANTO EUROPE; DRUKKER INT; JAPAN NEW DIAMOND FORUM; COMMISS EUROPEAN COMMUNITIES; KOBEL STEEL; MITSUBISHI MAT; SUMIMOTO ELECT IND; DE BEERS IND DIAMOND DIV citováno v: 1. Discussion of the importance of the refraction effects for RHEED By: Mitura, Zbigniew; Szczypinski, Michal M.; Mitura, Stanislaw APPLIED SURFACE SCIENCE Volume: 421 Special Issue: SI Pages: 247-251 Part: A Published: NOV 1 2017 THE SYSTEM FOR DEPOSITING HARD DIAMOND-LIKE FILMS ONTO COMPLEX-SHAPED MACHINE ELEMENTS IN AN RF ARC PLASMA By: MITURA, S; HAS, Z; GOROKHOVSKY, V Conference: 1ST EUROPEAN CONF ON DIAMOND AND DIAMOND-LIKE CARBON COATINGS Location: CRANS-MONTANA, SWITZERLAND Date: SEP 17-19, 1990 Sponsor(s): COMMISS EUROPEAN COMMUNITIES; ATOM ENERGY AUTHORITY TECHNOL, HARWELL LAB SURFACE & COATINGS TECHNOLOGY Volume: 47 Issue: 1-3 Pages: 106-112 Published: AUG 1991 citováno v: 1. CHARACTERISTICS OF CARBIDE INTERFACIAL LAYER FORMED DURING DEPOSITION OF DLC FILMS ON 316L STAINLESS STEEL SUBSTRATE By: Dudek, M. ARCHIVES OF METALLURGY AND MATERIALS Volume: 62 Issue: 4 Pages: 2211-2216 Published: DEC 2017 2. Carbon coatings with high concentrations of silicon deposited by RF PECVD method at relatively high self-bias By: Jedrzejczak, A.; Batory, D.; Dominik, M.; et al. SURFACE & COATINGS TECHNOLOGY Volume: 329 Pages: 212-217 Published: NOV 25 2017 NUCLEATION OF DIAMOND POWDER PARTICLES IN AN RF METHANE PLASMA By: MITURA, S JOURNAL OF CRYSTAL GROWTH Volume: 80 Issue: 2 Pages: 417-424 Published: FEB 1987 citováno v: 1. CHARACTERISTICS OF CARBIDE INTERFACIAL LAYER FORMED DURING DEPOSITION OF DLC FILMS ON 316L STAINLESS STEEL SUBSTRATE By: Dudek, M. ARCHIVES OF METALLURGY AND MATERIALS Volume: 62 Issue: 4 Pages: 2211-2216 Published: DEC 2017 2. Pyrolysis and Oxidation of Methane in a RF Plasma Reactor By: Chen, Qi; Yang, Xiaofang; Sun, Jintao; et al. PLASMA CHEMISTRY AND PLASMA PROCESSING Volume: 37 Issue: 6 Pages: 1551-1571 Published: NOV 2017 ELECTRICAL-PROPERTIES OF THIN CARBON-FILMS OBTAINED BY RF METHANE DECOMPOSITION ON AN RF-POWERED NEGATIVELY SELF-BIASED ELECTRODE By: HAS, Z; MITURA, S; CLAPA, M; et al. THIN SOLID FILMS Volume: 136 Issue: 2 Pages: 161-166 Published: FEB 15 1986

citováno v: 1. CHARACTERISTICS OF CARBIDE INTERFACIAL LAYER FORMED DURING DEPOSITION OF DLC FILMS ON 316L STAINLESS STEEL SUBSTRATE By: Dudek, M. ARCHIVES OF METALLURGY AND MATERIALS Volume: 62 Issue: 4 Pages: 2211-2216 Published: DEC 2017 2. Carbon coatings with high concentrations of silicon deposited by RF PECVD method at relatively high self-bias By: Jedrzejczak, A.; Batory, D.; Dominik, M.; et al. SURFACE & COATINGS TECHNOLOGY Volume: 329 Pages: 212-217 Published: NOV 25 2017 Forming of cast Fe-45 at.% Al alloy with high content of carbon By: Schindler, Ivo; Kratochvil, Petr; Prokopcakova, Petra; et al. INTERMETALLICS Volume: 18 Issue: 4 Pages: 745-747 Published: APR 2010 citováno v: 1. Kinetics of static recrystallization in the coarse-grained Fe-40 at.%Al-Zr-B alloy By: Schindler, Ivo; Kopecek, Jaromir; Kawulok, Petr; et al. ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING Volume: 17 Issue: 4 Pages: 816-826 Published: SEP 2017 LIBS analysis of crop plants By:Pouzar, M (Pouzar, Miloslav)[ 1 ] ; Cernohorsky, T (Cernohorsky, Tomas)[ 1 ] ; Prusova, M (Prusova, Maria)[ 2 ] ; Prokopcakova, P (Prokopcakova, Petra)[ 3 ] ; Krejcova, A (Krejcova, Anna)[ 1 ] JOURNAL OF ANALYTICAL ATOMIC SPECTROMETRY Volume: 24 Issue: 7 Pages: 953-957 DOI: 10.1039/b903593a Published: 2009 citováno v: 1. Low power continuous wave-laser seed irradiation effect on Moringa oleifera germination, seedling growth and biochemical attributes By: Urva; Shafique, Hina; Jamil, Yasir; et al. JOURNAL OF PHOTOCHEMISTRY AND PHOTOBIOLOGY B-BIOLOGY Volume: 170 Pages: 314-323 Published: MAY 2017 2. Laser-induced breakdown spectroscopy of environmental and synthetic samples using non-intensified CCD: optimization of the excitation wavelength By: Nicolodelli, G.; Senesi, G. S.; Romano, R. A.; et al. APPLIED PHYSICS B-LASERS AND OPTICS Volume: 123 Issue: 4 Article Number: 127 Published: APR 2017 3. Accuracy improvement of quantitative LIBS analysis using wavelet threshold de-noising By: Xie, Shichen; Xu, Tao; Han, Xiaodan; et al. JOURNAL OF ANALYTICAL ATOMIC SPECTROMETRY Volume: 32 Issue: 3 Pages: 629-637 Published: MAR 1 2017 4. Temporal Emission of Magnesium Lines from Laser-Induced Plasma and Use in Calibration Curves By: Helmi, Mohamad; Aziz, Muhammad Safwan; Ali, Jalil Book Group Author(s): AIP Conference: 9th International Conference on Plasma Science and Applications (ICPSA) Location: Univ Teknologi Malaysia, MALAYSIA Date: NOV 28-30, 2016 Sponsor(s): Asian African Assoc Plasma Training; Newton Ungku Omar Fund; British Council; Govt Grp High Technol, Malaysian Ind; Inst Plasma Focus Studies; Univ Tenaga Nas; Nilai Univ; Univ York; Kementerian Pendidikan Tinggi INTERNATIONAL CONFERENCE ON PLASMA SCIENCE AND APPLICATIONS (ICPSA2016) Book Series: AIP Conference Proceedings Volume: 1824 Article Number: UNSP 030008 Published: 2017 Structure Distribution in Precise Cast Iron Moulded on Meltable Model By: Skrbek, B.; Policar, K. ARCHIVES OF FOUNDRY ENGINEERING Volume: 15 Issue: 4 Pages: 69-74 Published: DEC 2015 citováno v: 1. Inclusion characteristics of stainless steel castings By: Yin, X.; Yang, Y.; Li, D.; et al. IRONMAKING & STEELMAKING Volume: 44 Issue: 2 Pages: 140-151 Published: 2017 Detection of spring steel surface decarburization by magnetic hysteresis measurements By: Perevertov, O.; Stupakov, O.; Tomas, I.; et al. NDT & E INTERNATIONAL Volume: 44 Issue: 6 Pages: 490-494 Published: OCT 2011 citováno v:

1. A RSM-based predictive model to characterize heat treating parameters of D2 steel using combined Barkhausen noise and hysteresis loop methods By: Kahrobaee, Saeed; Hejazi, Taha-Hossein JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS Volume: 433 Pages: 131-140 Published: JUL 1 2017 2. Detection of milled 100Cr6 steel surface by eddy current and incremental permeance methods By: Perevertov, O.; Neslusan, M.; Stupakov, A. NDT & E INTERNATIONAL Volume: 87 Pages: 15-23 Published: APR 2017 3. Inspection of diesel engine injectors by several electromagnetic nondestructive methods By: Vertesy, G.; Balassa, P.; Gasparics, A.; et al. INTERNATIONAL JOURNAL OF APPLIED ELECTROMAGNETICS AND MECHANICS Volume: 54 Issue: 3 Pages: 449-459 Published: 2017 Evaluation of surface decarburization depth by magnetic Barkhausen noise technique By: Stupakov, O.; Perevertov, O.; Tomas, I.; Skrbek, B.; et al. JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS Volume: 323 Issue: 12 Pages: 1692-1697 Published: JUN 2011 citováno v: 1. Evaluation of a Nitrided Case Depth by the Magnetic Barkhausen Noise By: Stupakov, Alexandr; Farda, Robert; Neslusan, Miroslav; et al. JOURNAL OF NONDESTRUCTIVE EVALUATION Volume: 36 Issue: 4 Article Number: 73 Published: DEC 2017 2. Using Barkhausen noise to measure coating depth of coated high-speed steel By: Seemuang, N.; Slatter, T. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY Volume: 92 Issue: 1-4 Pages: 247-258 Published: SEP 2017 3. Monitoring of grinding burn via Barkhausen noise emission in case-hardened steel in large-bearing production By: Neslusan, Miroslav; Cizek, Jakub; Kolarik, Kamil; et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY Volume: 240 Pages: 104-117 Published: FEB 2017 The Effect of Laves Phase (Fe,Al)(2)Zr on the High-Temperature Strength of Carbon-Alloyed Fe3Al Aluminide By: Kratochvil, Petr; Vodickova, Vera; Kral, Robert; et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE Volume: 47A Issue: 3 Pages: 1128-1131 Published: MAR 2016 citováno v: 1. The Effect of Low Concentrations Nb and C on the Structure and High-Temperature Strength of Fe3Al Aluminide By: Kratochvil, Petr; Svec, Martin; Vodikova, Vera METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE Volume: 48A Issue: 9 Pages: 4093-4096 Published: SEP 2017 Evaluation of Solid-Solution Hardening of Fe-27 at. pct Al by Vanadium and Comparison to Precipitation Strengthening by Vanadium Carbides By: Kratochvil, Petr; Pesicka, Josef; Kral, Robert; Vodickova, Vera, et al. Conference: 4th International Conference on Advances in Solidification Processes ICASP) Location: BCAST, Old Windsor, ENGLAND Date: JUL 08-11, 2014 Sponsor(s): EPSRC Ctr LiME; LiME; IOM3; MICRESS METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE Volume: 46A Issue: 11 Pages: 5091-5094 Published: NOV 2015 citováno v: 1. Strengthening of Fe3Al Aluminides by One or Two Solute Elements By: Kratochvil, Petr; Danis, Stanislav; Minarik, Peter; et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE Volume: 48A Issue: 9 Pages: 4135-4139 Published: SEP 2017 2. Modelling of solid solution strengthening in multicomponent alloys By: Walbruhl, Martin; Linder, David; Agren, John; et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING Volume: 700 Pages: 301-311 Published: JUL 17 2017

The Effect of Laves Phase (Fe,Al)(2)Zr on the High-Temperature Strength of Carbon-Alloyed Fe3Al Aluminide By:Kratochvil, P (Kratochvil, Petr)[ 1 ] ; Vodickova, V (Vodickova, Vera)[ 2 ] ; Kral, R (Kral, Robert)[ 1 ] ; Svec, M (Svec, Martin)[ 2 ] View ResearcherID and ORCID METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE Volume: 47A Issue: 3 Pages: 1128-1131 DOI: 10.1007/s11661-015-3309-2 Published: MAR 2016 citováno v: 1. The Effect of Low Concentrations Nb and C on the Structure and High-Temperature Strength of Fe3Al Aluminide By: Kratochvil, Petr; Svec, Martin; Vodikova, Vera METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE Volume: 48A Issue: 9 Pages: 4093-4096 Published: SEP 2017 Microstructure and Creep Behavior of Fe-27Al-1Nb Alloys with Added Carbon By: Dobes, Ferdinand; Kratochvil, Petr; Pesicka, Josef; Vodickova, Vera ; et al. Conference: Symposium on High Entropy Alloy Location: Univ Tennessee, San Antonio, TX Date: MAR 15-19, 2015 Sponsor(s): Alcoa Tech Ctr; Natl Energy Technol Lab; US Army Res Off; TMS Struct Mat Div; TMS ASM METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE Volume: 46A Issue: 4 Pages: 1580-1587 Published: APR 2015 citováno v: 1. The Effect of Low Concentrations Nb and C on the Structure and High-Temperature Strength of Fe3Al Aluminide By: Kratochvil, Petr; Svec, Martin; Vodikova, Vera METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE Volume: 48A Issue: 9 Pages: 4093-4096 Published: SEP 2017 High-temperature oxidation behaviour of Zr alloyed Fe3Al-type iron aluminide By:Hotar, A (Hotar, A.)[ 1 ] ; Palm, M (Palm, M.)[ 2 ] ; Kratochvil, P (Kratochvil, P.)[ 3 ] ; Vodickova, V (Vodickova, V.)[ 1 ] ; Danis, S (Danis, S.)[ 3 ] View ResearcherID and ORCID CORROSION SCIENCE Volume: 63 Pages: 71-81 DOI: 10.1016/j.corsci.2012.05.027 Published: OCT 2012 citováno v: 1. Mechanical properties and electronic structures of Fe-Al intermetallic By: Liu, YaHui; Chong, XiaoYu; Jiang, YeHua; et al. PHYSICA B-CONDENSED MATTER Volume: 506 Pages: 1-11 Published: FEB 1 2017 The effect of Zr addition on the structure and high temperature strength of Fe-30 at.% Al type alloys By:Kratochvil, P (Kratochvil, Petr)[ 1 ] ; Kejzlar, P (Kejzlar, Pavel)[ 2 ] ; Kral, R (Kral, Robert)[ 1 ] ; Vodickova, V (Vodickova, Vera)[ 2 ] View ResearcherID and ORCID INTERMETALLICS Volume: 20 Issue: 1 Pages: 39-46 DOI: 10.1016/j.intermet.2011.08.007 Published: JAN 2012 citováno v: 1. Microstructure and mechanical properties of a Fe-28%Al-5%Cr-1%Nb-2%B alloy fabricated by Laser Engineered Net Shaping By: Lazinska, M.; Durejko, T.; Zasada, D.; et al. MATERIALS LETTERS Volume: 196 Pages: 87-90 Published: JUN 1 2017 2. Laser additive manufacturing of iron aluminides strengthened by ordering, borides or coherent Heusler phase By: Michalcova, Alena; Sencekova, Lucia; Rolink, Gesa; et al. MATERIALS & DESIGN Volume: 116 Pages: 481-494 Published: FEB 15 2017 The effect of silicon on the structure of Fe-40 at.% Al type alloys with high contents of carbon (1.9-3.8 at.%) By: Kratochvil, P.; Dobes, F.; Vodickova, V. INTERMETALLICS Volume: 17 Issue: 1-2 Pages: 39-45 Published: JAN-FEB 2009 citováno v: 1. Microstructures and mechanical properties of ferrite-based lightweight steel with different compositions By: Xu, Reng-chong; He, Yan-lin; Jiang, Hu; et al. JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL Volume: 24 Issue: 7 Pages: 737-742 Published: JUL 2017

Iron doped thin TiO2 films synthesized with the RF PECVD method By:Sobczyk-Guzenda, A (Sobczyk-Guzenda, A.)[ 1 ] ; Owczarek, S (Owczarek, S.)[ 1 ] ; Szymanowski, H (Szymanowski, H.)[ 1 ] ; Volesky, L (Volesky, L.)[ 2 ] ; Walkowiak, B (Walkowiak, B.)[ 1,3 ] ; Miszczak, S (Miszczak, S.)[ 1 ] ; Gazicki-Lipman, M (Gazicki-Lipman, M.)[ 1 ] CERAMICS INTERNATIONAL Volume: 41 Issue: 6 Pages: 7496-7500 DOI: 10.1016/j.ceramint.2015.02.071 Published: JUL 2015 citováno v: 1. Modeling energy band gap of doped TiO2 semiconductor using homogeneously hybridized support vector regression with gravitational search algorithm hyper-parameter optimization By: Owolabi, Taoreed O.; Akande, Kabiru O.; Olatunji, Sunday O.; et al. AIP ADVANCES Volume: 7 Issue: 11 Article Number: 115225 Published: NOV 2017 2. Interdiffusion and phase formation in the Fe-TiO2 thin-film system By: Afonin, N. N.; Logacheva, V. A. SEMICONDUCTORS Volume: 51 Issue: 10 Pages: 1300-1305 Published: OCT 2017 3. A hybrid intelligent scheme for estimating band gap of doped titanium dioxide semiconductor using crystal lattice distortion By: Owolabi, Taoreed O.; Gondal, Mohammed A. COMPUTATIONAL MATERIALS SCIENCE Volume: 137 Pages: 249-256 Published: SEP 2017 4. The effect of Fe segregation on the photocatalytic growth of Ag nanoparticles on rutile TiO2(001) By: Busiakiewicz, Adam; Kisielewska, Aneta; Piwonski, Ireneusz; et al. APPLIED SURFACE SCIENCE Volume: 401 Pages: 378-384 Published: APR 15 2017 5. The effect of thermal annealing on Fe/TiO2 coatings deposited with the help of RF PECVD method. Part I. Chemical and phase composition By: Sobczyk-Guzenda, Anna; Owczarek, Slawomir; Batory, Damian; et al. CERAMICS INTERNATIONAL Volume: 43 Issue: 5 Pages: 3993-4004 Published: APR 1 2017 6. The effect of thermal annealing on Fe/TiO2 coatings deposited with the help of RF PECVD method. Part II. Optical and photocatalytic properties By: Sobczyk-Guzenda, Anna; Owczarek, Slawomir; Kolodziejczyk, Lukasz; et al. CERAMICS INTERNATIONAL Volume: 43 Issue: 5 Pages: 4005-4014 Published: APR 1 2017 7. Reactive close field unbalance magnetron sputter deposition of titanium dioxides for potential photovoltaic applications By: Zhang, Z.; Shao, G.