bag HANDLING - Kockums Bulk Systems · Manual handling of bags can be awkward, tiring, heavy going...
Transcript of bag HANDLING - Kockums Bulk Systems · Manual handling of bags can be awkward, tiring, heavy going...
bag HANDLING
K40 Manual Bag Dump Station
Kockums K40 Bag Dump station is a generously sized and ergonomically designed enclosure for easy and safe emptying of bags. The system is available with an integral dust management system and waste bag compactor for clean and contained disposal of the waste bags. This bag dumping system is capable of handling up to 3 bags/min, but higher rates may be achieved with efficient operators.
Integral dust management system
Waste sack compactors
Vacuum bag lifters
Downstream conveyors, sieves, feeders and lump breakers
Vacuum bag lifting system
Conveying system
Waste bag compactor
Dust extraction system
K40 bag dump station
Operator platform with pallet safety gate
Bag dump infeedto a multi-ingredient
recipe batching system
Salt | Lactose | Calcium Carbonate | Sugar | Coffee | Starch | Flour | Sand | Granules | Cement | Milk Powder
Clean Design & Check Sieving
The ‘Sievmaster Easilift’ station is a clean and simple means of check sieving into bins or containers. Most bag dumping units require an operator to lift the hood manually to gain full access to the sieve unit. The Easilift has a flip top hood which is assisted so there is no lifting required to open the unit. The hood is also designed to take a 25kg bag length wise making it easier to split and tip the contents into the sieve below.
Check sieving from bags or containers
Mobile units available
Easy and quick to clean
Metal detectable gaskets
Magnets
Sieving into tote bins, drums, mixer bowls or conveyors
Flour, sugar, spices, cosmetics, seeds, almost any powder or granulated material
Lump Breakers
Magnets
Sieves & Sifters
Pharmaceutical grade bag dumpingsystem feeding vacuum conveying systems
Flocculant | Titanium Dioxide | Activated Carbon | Fly Ash | Lime | Concentrates | Magnesium Oxide | Bentonite
bag HANDLING
Automatic Bag Opener
The K400 automatic bag opener has been developed to accommodate a broad range of bags yet remain simple and reliable in operation. Efficient separation of the bag remnants from the material with negligible material carry-over and degradation, is achieved.
Typical operating rates are up to 600 bags/hr subject to bag construction and material characteristics.
The system operates by feeding bags through an in-feed chute which houses a series of rotating blades. The bag is slit along it’s length on top and/or bottom prior to entering a trommel drum. The rotating trommel drum gently tumbles the bag emptying the contents within. The contents drops through perforations into the feed hopper below where an optional secondary catch screen is located. The empty bags continue on through the trommel towards the bag compactor where they are compressed into a sealed tubular waste bag for clean and easy disposal.
Up to 600 bags an hour (10 per min)
Suitable for most bag types
Dust management system
Waste bag compactor
Interlocked access doors for inspection, cleaning or maintenance
Infeed conveyors
Vacuum lifting systems
Downstream conveying systems
Bag cutter & trommel drum
Nickel Concentrate | Propellant | Carbon Black | Cocoa | Ammonium Nitrate | Clay | Zinc Oxide | Iron Oxide
bag HANDLING
Vacuum Bag Lifters
Manual handling of bags can be awkward, tiring, heavy going and carries a high risk of injury to operators. This is the reason why lifting bags is one of the top 3 most common applications of the VacuEasylift.
The VacuEasylift is ideal to pick up paper, plastic, poly-woven and jute bags. Our wide range of suction feet, extended handles and a large variety of support structures make easy work of palletising and de-palletising operations.
TAWI the ORIGINAL of its kind
Safe and simple to use
Quiet operation
Heavy duty filters for dusty environments
Available in Stainless steel for food and Clean room applications
Supplied with modular jib arm or gantry support structures
Systems available for Hazardous areas Vacuum Pump
Diatomaceous Earth | Graphite | Feldspar | Fluoride | Limestone | Gypsum | Magnesia | Lead Oxide | Resin
Column & Jib Arm Gantry Support
bag HANDLING
Concept Design & Testing
Engineering Design & Build
Install, Commission& Train
After Sales Support & Spares
From a project’s infancy Kockums can quickly and accurately provide concept designs and budget pricing for capital approval. At this early stage material trials are often under-taken at our Melbourne facility to help confirm solution selection.
Our In-house design engineering team design all equipment in compliance with Australian Standards and meeting our customers expectations. The Kockums Brand is well known for its “built to last” reputation and often unique approach.
Kockums offers installa-tion, commissioning and operator training. Equipment is fully assembled and tested prior to commissioning by experienced engineers to ensure optimum performance and efficiency.
Kockums has a trained service team providing spares and nationwide support to our clients. Every installation requires something different and our partnership program allows us to work with individual customers to determine the most effective level of support.
139 - 143 Bamfield Road, Heidelberg West, Vic 3081 Phone: +61 (3) 9457 8200 Fax: +61 (3) 9457 7695Email: [email protected]
Bag Handling Bulk Bag & IBC Handling Mechanical Conveying Pneumatic Conveying
Process Equipment Bagging Machines Palletising & Wrapping Case & Carton Packaging
Vacuum Lifting Cranes Accessories Partner Support