Canon Microfilm Scanner 300Canon Microfilm Scanner 300

Back To BasicsBack To Basics

Presented by:Angela ScottShannon Moran

Introduction To The Auto CarrierIntroduction To The Auto Carrier

Auto Carrier: Tray located beneath the display Auto Carrier: Tray located beneath the display screen of the screen of the Microfilm/Microfiche Microfilm/Microfiche Reader. Reader.

Rolls of microfilm/slides of microfiche are Rolls of microfilm/slides of microfiche are inserted onto this tray and the tray is easily inserted onto this tray and the tray is easily maneuvered for visibility of the content on maneuvered for visibility of the content on

rolls/slides.rolls/slides.

Using The Microfilm FeatureUsing The Microfilm Feature

Gently pull the auto carrier from the back to the frontby placing one hand on the back left corner and your

other hand on the diagonal silver handle on the right side of the tray.

Insert microfilm roll on silver peg.

Click the microfilm switch to the right to lock the roll in place.Click the microfilm switch to the right to lock the roll in place.

Bring the microfilm from over the top of the roll down and under the slender black roller. Continue threading the roll under the glass and stop when the film touches uptake roll on the right.

Press to the left, the blue button near the microfilm roll. Press to the left, the blue button near the microfilm roll. This button causes the film to travel onto the uptake roll.This button causes the film to travel onto the uptake roll.

Slide the auto carrier back until the images on the microfilm are now under the lens for viewing.

To remove microfilm after finished viewing, turn the To remove microfilm after finished viewing, turn the

beige direction knob to the left to rewind film to the original roll. beige direction knob to the left to rewind film to the original roll.

Gently pull the auto carrier from the back to the front by placing one hand on the back left corner and your other hand on the diagonal silver handle on the right

side of the tray.

Unclick the microfilm switch to the left to release the roll.Unclick the microfilm switch to the left to release the roll.

Remove microfilm roll from silver peg.

Using The Microfiche FeatureUsing The Microfiche Feature

Gently pull the auto carrier all the way to the back from the front by placing one hand on the back left corner and your

other hand on the diagonal silver handle on the right side of the tray.

Lift glass on the tray floor and place microfiche slide under glass.

Lower glass to rest on top of slide.

Grasp stand up silver handle on microfiche tray and slide Grasp stand up silver handle on microfiche tray and slide tray over tray over until the images on the microfilm are now under

the lens for viewing.

You are now able to view the microfiche on the screen above.

To remove microfiche after finished viewing, grasp To remove microfiche after finished viewing, grasp stand up silver handle on microfiche tray and slide tray stand up silver handle on microfiche tray and slide tray

back over back over to edge of auto carrier.

Carefully lift glass and remove microfiche slide.